Used Boge Fb 44269 for sale (1,295)

Condition: good (used), functionality: fully functional, roll diameter: 50 mm, roll width: 600 mm, roll pitch: 90 mm, total width: 685 mm, total height: 150 mm, total length: 990 mm, conveying length: 990 mm, construction width: 685 mm, construction height: 150 mm, input voltage: 24 V, overall weight: 30 kg, TAF item number: 1000005970 Manufacturer: TAF-Industriesysteme Year of manufacture: unknown Overall dimensions (LxWxH) in mm: 990 x 685 x 150 Width including side rail in mm: 685 Side rail height in mm: 140 Conveyor length in mm: 990 Conveyor width in mm: 600 Conveyor height in mm: 150 Roller pitch in mm: 90 Substructure: not available Support roller shaft type: M8 internal thread Support roller diameter: 50 mm Support roller per axle: 1 Support roller material: Steel Drive: Kyowa Puls Roller Motor type: 24 V motor roller Conveyor speed in m/s: 0.83 m/s Net weight in kg: 30 Ledpfx Ajy R D D Ijmtead Condition: used / fully functional Functional test: OK

Condition: used, Year of construction: 2012, Complete Power Plant, Full CHP Plant Wood Chip Heating / Thermal Oil System VAS 6MW Thermal + 1.1MW Electrical Output The plant was originally built in 2003 & 2004. Major components such as the thermal oil heater and hot water ECO were entirely replaced in 2012. Components: - Walking floor - Hydraulic feed - VAS combustion chamber - VAS thermal oil heater - Hot water ECO - Dedusting (coarse and fine dust removal) - Ash removal by chain conveyor - Exhaust gas path incl. fans and chimney system - Turboden ORC module with 1.1MW electrical output - Complete plant control with visualization Including units, pumps, and valves Including thermal oil pumps Including thermal oil Including all accessories required for operation The plant is being sold because a larger plant with significantly higher capacity has been built nearby. The walls and roof of the boiler house can also be included if required. Remaining thermal output in operation with Turboden ORC module: 5MW Lodpfx Amevytfuetsad Electrical output ORC module: 1.1MW Fuel consumption approx. 9 loose cubic meters per hour (depending on fuel) Dismantling must be carried out by the buyer. Further information on request.

Condition: excellent (used), With DRO Working travels 300 x 200 x 350 mm Table size 600 x 200 mm Spindle taper for collets ISO 30 Spindle speeds 80-2'200 rpm Lasdpsy Iz Rmsfx Amtod Misc.accessories MARCELS MASCHINEN CH

Condition: excellent (used), Year of construction: 2009, Control: Emco Easycycle Working Area Travel in X: 450 mm Ljdpoyvrkaefx Amtead Travel in Y: 400 mm Travel in Z: 350 mm Table Clamping area (L x W): 800 x 400 mm Max. table load: 300 kg Spindle Speed range (stepless): 10 – 5,000 rpm Distance to table surface: 40 – 440 mm Tool holder: SK 40 Quill stroke: 80 mm Swiveling vertical milling head: +/- 90° Feed Feed range: 10 – 5,000 mm/min Rapid traverse X/Y/Z-axis: 2,000 / 5,000 mm/min Feed force X/Y/Z: 10 / 10 / 15 kN Dimensions Dimensions (L x W x H): 1,980 x 2,030 x 1,990 mm Machine weight: 2,270 kg

Condition: good (used), Year of construction: 2007, functionality: fully functional, conveyor belt length: 1,760 mm, conveyor belt width: 730 mm, conveyor belt speed: 180 mm/s, total length: 2,000 mm, total height: 1,000 mm, overall weight: 150 kg, input frequency: 50 Hz, motor manufacturer: WEG, Equipment: emergency stop, TAF item number: 1000006117 Manufacturer: Herzog + Heymann Year of manufacture: 2007 Overall dimensions (LxWxH) in mm: 2,000 x 960 x 530 mm Width including side frame in mm: 820 Width including drive unit in mm: 820 Side frame height in mm: 80 Conveyor length in mm: 1,760 Conveyor width in mm: 730 Belt type: Smooth, blue Belt width in mm: 730 Substructure: Included, lifting substructure (H: approx. 530–1,000 mm) Running surface: Wood Drive: Head drive Motor type: Geared motor Motor manufacturer: WEG Motor specifications: 150 W / 50 Hz / 22 rpm Motor position (in conveying direction): left Lajdjy D T Ddopfx Amted Conveying speed in m/s: 0.025 – 0.18 Net weight in kg: 150 Special features: manually height-adjustable, stepless speed control, emergency stop, castors, incl. CEE 16A plug Condition: used / fully functional Functional test: OK

Year of construction: 2010, condition: like new (used), 2 units of air purification systems Maximum air flow rate: 1450 m³/h Air velocity: 0.7 m/s Voltage: 230 V, 50 Hz Lodpodt E Akjfx Amtead Dimensions (L x W x H): 800 x 800 x 1250 mm / unit Weight: 160 kg / unit New price: 7,200.00 € / unit Depending on your needs, we can also supply new replacement filters and spare parts! These two air purification systems are sold only as a package. SPECIAL PRICE: 1,990.00 € / unit, plus statutory VAT. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: new, Year of construction: 2021, functionality: fully functional, The Z-shaped conveyor belt from trio.technik is for sale; Infeed: 600 mm with complete hopper Incline: 1900 mm Discharge: 500 mm Usable width: 450 mm Constant belt speed: 3 m/min Laodpfxewb Skqs Amtjd Mobile Adjustment range via the wheels: 300 mm

Condition: good (used), Year of construction: 2005, functionality: fully functional, conveyor belt length: 4,500 mm, conveyor belt width: 400 mm, conveyor belt speed: 300 mm/s, total length: 4,500 mm, total width: 620 mm, total height: 350 mm, overall weight: 110 kg, discharge height: 350 mm, power: 0.37 kW (0.50 HP), input frequency: 50 Hz, Equipment: type plate available, Manufacturer: Overbeck Year of manufacture: 2005 Overall dimensions (LxWxH) in mm: 4,500 x 620 x 350 Width including side frame in mm: 510 Width including drive unit in mm: 620 Side rail height in mm: 140 Conveyor length in mm: 4,500 Conveyor width in mm: 450 Belt type: PVC, longitudinal groove Laedpfsyzrncex Amtsd Belt width in mm: 400 Substructure: None Running surface: Steel Drive: Head drive Motor type: Geared motor Motor data: 0.37 kW, 50 Hz Motor position: Right Conveyor speed in m/s: 0.3 Net weight in kg: 110 Condition: Used / fully functional Functional test: OK

Condition: good (used), x-travel 380 mm z-travel 140 mm dist. cutter spindle - workpiece spindle 370 mm distance spindle - column 163 mm Ljdpfeyz Dg Dox Amtsad table-size 630 x 150 mm quill stroke 40 mm milling head -swivable 360 Grad spindle turning speed range 120-2000 U/min table feed 35/65/170 mm/min voltage 380 V weight of the machine ca. 130 kg total power requirement 0,5 kW dimensions of the machine ca. 0,91 x , 0,68 x 1,80 m Includes 32-piece collet set Includes base cabinet with key Includes small parts Includes operating instructions

Condition: excellent (used), functionality: fully functional, Conveyor belts for weak roundwood / poles / rods, etc. Lasdpfx Amowut Nhsted 1 piece = 5,000 mm length, 280 mm belt width, with double transport rollers. 1 piece = 6,500 mm length, 240 mm belt width, with trough under the belt. 1 piece = 3,950 mm length, 300 mm belt width, with double transport rollers.

Condition: excellent (used), Year of construction: 1995, Quiet box conveyor belt. Lasdpfswl Htzjx Amted Length 7.0 m. Belt width 350 mm. With scraper. 1.5 kW drive. The same belt is also available in a 6.0 m length. Both belts are 3 years old.

Condition: excellent (used), Year of construction: 1995, Quiet box conveyor belt. Length 7.0 m. Belt width 350 mm. With scraper. 1.5 kW drive. Lodewl Htbepfx Amtjad The same belt is also available in a 6.0 m length. Both belts are 3 years old.

Condition: new, Conveyor belts, transport belts, chip conveyors. Conveyor length, belt width, drive power, surface finish, and other technical details are available upon request and can be customized to meet customer specifications. Ljdpfx Amod A Ttfjtsad

Condition: used, Year of construction: 2006, functionality: fully functional, conveyor belt length: 4,000 mm, conveyor belt width: 280 mm, conveyor belt speed: 50 mm/s, total length: 3,300 mm, total width: 650 mm, total height: 2,500 mm, overall weight: 150 kg, input voltage: 400 V, input frequency: 50 Hz, motor manufacturer: Panasonic, TAF item number: 1000006169 Manufacturer: Fimatec Year of manufacture: 2006 Overall dimensions (LxWxH) in mm: 3,300 x 650 x 2,500 Width including side panel in mm: 360 Width including drive unit in mm: 650 Side plate height in mm: 200 Conveyor length, total in mm: 4,000 Conveyor length, horizontal in mm: 800 bottom / 200 top Conveyor length, vertical in mm: 3,000 Conveyor width in mm: 280 Belt type: Plastic, slats Belt width in mm: 300 Belt lugs (lug height/lug spacing) in mm: 50 / 430 Base frame: rollable, height-adjustable Height-adjustable from: 0 to: 80 Running surface: plastic rails Inlet height in mm: max: 360 min: 280 Outlet height in mm: max: 2,510 min: 2,430 Drive: Head drive Motor type: Geared motor Lasdpoyyvqrjfx Amted Motor data: Panasonic, 50 Hz, 400 V, 0.3 A Motor position: left Conveyor speed in m/s: 0.05 Net weight in kg: 150 Special features: MultiControl MCU988 control unit (constant or programmable cycle timing possible), CEE plug included, cable length: 2m Condition: used / fully functional Functional test: OK

Condition: used, lifting height: 3,000 mm, fuel type: electric, mast type: duplex, battery voltage: 48 V, fork length: 1,000 mm, Empty weight: 2.848 kg Lifting capacity: 1.000 kg Maximum passing height: 210 cm Supply voltage: 380 V CE mark: yes General condition: average Technical condition: average Visual appearance: average Lsdpfjyu T Naox Amtead Please contact Bas Sindorf for more information

Condition: good (used), Year of construction: 1965, For technical data, see images. Laedpfoyvtm Njx Amtjd

Condition: used, This listing is for a Fisher Scientific TopMix FB 15024 Ljdpfx Amsxzh R Dstead The Fisher Scientific TopMix FB 15024 is a laboratory vortex mixer designed for mixing small to medium-sized sample tubes. It is commonly used in research and clinical laboratories for applications such as sample preparation and homogenization. The Fisher Scientific TopMix FB 15024 Vortex Mixer offers precision and reliability for thorough sample agitation. Ideal for laboratories requiring consistent mixing, the TopMix FB 15024 is designed to handle tubes and containers of various sizes with ease, ensuring uniform sample preparation across a range of applications. Its robust construction and user-friendly interface make it a staple piece of equipment in any scientific research setting.

Condition: excellent (used), Year of construction: 2006, X-axis 300 mm Y-axis 200 mm Z-axis 350 mm Tool holder SK 30 Spindle speed 80 – 2,200 rpm Lajdpfx Asyyykpsmtjd Including vise Including digital display Including various tools Including operating manual

Condition: used, spindle taper ISO 40 x-travel 710 mm y-travel 600 mm z-travel 445 mm Control Heidenhain type TNC355 mm table surface area 1000x550 mm turning speeds 6300 U/min quill stroke 80 mm Feed 1-3600 mm/min rapid traverse 6 m/min The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Ledoytx Iljpfx Amtead We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), machine/vehicle number: EFB 11-20279, Year of construction: 2008, Offer 26065 Technical Data: - Operating hours (read) approx. 4946 h - Load capacity approx. 1600 kg - Lifting height up to approx. 3.7 m - Fork length approx. 1150 mm - Fork carriage width 920 mm Laodpjyvh Iuofx Amtod - Overall height approx. 2350 mm - Total length with forks approx. 3550 mm - Width approx. 1080 mm - Total weight with battery approx. 3000 kg - Sideshift - Charger

Condition: excellent (used), Year of construction: 2005, travel distance X-axis: 450 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 350 mm, spindle speed (max.): 2,500 rpm, quill stroke: 100 mm, For sale is an Emco tool milling machine, model FB-4. The machine was previously used exclusively for inter-company training purposes. Currently, two identical Emco FB-4 machines are still in stock. Tool Milling Machine V/H Manufacturer: Emco Model: FB-4 Year of manufacture: 2005 Control: Heidenhain ND-750 display Technical parameters: ----- • Travel X-Y-Z: 450 x 300 x 350 mm • Clamping surface: 800 x 400 mm • Tool holder: SK-40 • Tool clamping: hydraulic • Quill stroke: 100 mm • Milling head swivels ± 90° • Spindle speed: 50 – 2,500 rpm • Speed selection: 18 steps • Electric central lubrication • Machine lamp • Coolant system • Splash guard cabin (foldable) • Weight: 1,550 kg • Dimensions LxWxH in mm: ..1,485 x 1,500 x 1,700 mm Accessories: Lasdpfxoyvra Ij Amted ----- • 4x machine leveling feet • Operating manual • Counter bearing for horizontal machining • Shaft for horizontal machining • Table enclosure (currently removed) • 10x SK-40 tool holders

Condition: used, Year of construction: 1972, spindle diameter 180 mm x-travel 8000 mm y-travel 4000 mm Control Siemens type Sinumerik System 3 ram: horizontal adjustment 800 mm Spindle travel W-axis 1400 mm ram: diameter 220 mm engine output 75 kW turning speeds 900 U/min Plate area 8000x6000 mm Overhauled in 1983 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Lasdpsyqv Evjfx Amtjd If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, spindle diameter 160 mm x-travel 10500 mm y-travel 4000 mm spindle taper ISO 50 z-travel 950 mm turning speeds 3,15-1000 U/min transmission ratio 4 spindle power 58 kW Support sleeve 340x400 mm w-travel 900 mm Feed x 0,12-9600 mm/U Feed y/z/w 0,1-5600 mm/U Plate area 39,5 m² Plate 5400x3500 mm Plate 5900x3500 mm T-slot - distance 365 mm T-slots 35/75 mm Thickness of the plate 360 The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. Lasdpjyqvzwjfx Amtsd About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: as good as new (ex-display), overall weight: 1,300 kg, loading space length: 2,650 mm, loading space width: 1,610 mm, DEMO TRAILER Vezeko Husky-FB-B-13.28/10 1300kg 265x161cm Lowering Platform Trailer – Floor panel has minor cracks – Lowering trailer from manufacturer VEZEKO, model HUSKY FB13.28. With a lowering trailer, vehicles can be loaded with ease. The platform is raised using the standard hand hydraulic system and is lowered by opening the valve on the hand pump. This makes it effortless to drive pallets, lawnmowers, machines, motorcycles, quads, and ATVs onto the car trailer. Standard features of the Senkomat include a hand hydraulics system, drawbar box, lashing eyes, jockey wheel, durable welded hot-dip galvanized frame, and a robust V-drawbar. Detailed equipment specifications and technical details can be found further below. All lowering platform trailers are also available as curtain-sided and box trailers. Car trailer accessories such as motorcycle wheel chocks, motorcycle rails, high covers, side extensions, mesh extensions, motorcycle tie-down straps, straps, shock absorbers, TÜV approval for 100km/h, and trailer locks are available. Technical Data: Internal dimensions LxWxH: approx. 265x161x10cm; drive-up wedge extends the open loading area by approx. 30cm Overall external dimensions LxWxH: approx. 425x227x80cm Gross weight: 1300kg with brake Unladen weight: approx. 380kg Payload: approx. 920kg Loading height: approx. 45cm Lsdpeyq N H Tofx Amtsad

Condition: used, functionality: fully functional, roll diameter: 50 mm, roll width: 50 mm, roll pitch: 90 mm, total width: 685 mm, total height: 150 mm, total length: 3,000 mm, conveying length: 3,000 mm, construction width: 685 mm, construction height: 150 mm, overall weight: 90 kg, working width: 500 mm, empty load weight: 90 kg, TAF item number: 1000005972 Manufacturer: TAF-Industriesysteme Year of manufacture: unknown Overall dimensions (LxWxH) in mm: 3,000 x 685 x 150 Width incl. side panel in mm: 685 Laedpfx Amsyfh Acstod Side panel height in mm: 140 Conveyor length in mm: 3,000 Conveyor width in mm: 600 Conveyor height in mm: 150 Roller pitch in mm: 90 Substructure: without (optionally available) Support roller axle type: M8 internal thread Support roller diameter: in mm 50 Support roller per axle: 1 Support roller material: steel Drive: Poly-V belt Motor type: 24V motor roller 35 ZMHT Motor data: Kyowa pulseroller Conveyor speed in m/s: max. 0.8 m/s Net weight in kg: 90 Condition: used / fully functional Function test: OK