Used Brabender Ddw -Ms -Fw40/1-50 for sale (93,123)

Condition: used, empty load weight: 300 kg, maximum load weight: 1,050 kg, overall weight: 1,350 kg, loading space length: 2,510 mm, loading space width: 1,300 mm, loading space height: 1,500 mm, tire size: 195/70r14c, Sturdy, braked low-loader with a high cover, manufactured by ANSSEMS, model BSX1350 251x130. As standard equipment, the Anssems covered trailer with brakes features aluminum sideboards, a cover and frame, internal locking mechanisms, external lashing points, profile channels for mounting accessories or securing the load, a very stable welded steel frame, side rails, a front headboard, a front flap, pull-out supports for the tailgate, a support wheel, and a V-drawbar. We also offer accessories for Anssems car trailers, such as a flat cover, net hooks, a corrugated grid attachment, a sideboard attachment, a rear support set, a toolbox, lashing points, lashing straps, and a lock. --- You can find all our cost-effective offers on our website. Germany-wide delivery is possible (except for the islands)! Please ask us for the prices. --- PKW-Anhänger-Center Ahrens Moordeicher Landstraße 37 28816 Stuhr near Bremen Tel: 0 Pgsdpfx Aogf Nxzoflop Fax: Pick-up times: Monday - Friday – hours Pick-up is not possible on Saturdays!

Condition: used, Manual swing bending machine KRAMER, type AMS 650 x 1.5 Manual swing bending machine, press brake Year of manufacture approx. 1985 Working length 650 mm Sheet thickness at 40 kg/mm2 1.5 mm Upper die opening approx. 60 mm Bending die adjustment approx. 0-25 mm Bending angle 0-180° Pgjdpfx Afedzqaaeljp - Upper die adjustment via hand crank - Pre-setting rail for the bending die - One-piece sharp bending rail, 135° Space requirement L x W x H 1200 x 600 x 1100 mm Weight 160 kg Good condition

Condition: used, Year of construction: 2013, mobile turning device with hydraulic height and lateral displacement load capacity 8 x 150 tons component diameter 5,000 up to 12,000 mm several turning devices must be installed to weld the segments total load capacity 1,200 tons maximum steel support rollers *support rollers can be adjusted in three axes under load* - moving - roller axis:  + / - 50 mm - stroke - height adjustment: 0 bis 150 mm - thrust travel - cross adjustment: + / - 50 mm two height-adjustable drive units - type TR15 - M - year of construction 2010 load capacity 15,000 kg per roller roller diameter 559 mm - roller width 300 mm drive torque 2 x ca. M = 3,500 Nm connected load 3 KW per drive unit Psdpfx Ajt Run Ijflsgp manual hydraulic roller feed rotational speed stepless 100 up to 2,000 mm/min by handheld remote control second drive unit can be operated by radio remote controle The entire system is designed for transportation in nine 20ft containers for worldwide use. total weight of the plant approx. 130 to

Year of construction: 1980, condition: used, machine/vehicle number: 30245035, The offer here is a double shear table. The machine dates back to 1980 and has a lifting capacity of 4,000 kg. The lifting table has a driven runway system and has the XYZ function (lifting, process, etc). The advantage of double scissors is that they can achieve a high operating stroke when space is limited. The dimension is 8. 20 m long and 1. 20 m wide. The conveyor belt has a width of 80 cm and 10 cm roll diameter. Pgsdpfx Afegtmv Seljp

Condition: used, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ). Holp Profile Bucket / PL.120.150 / MS08 / 1,500 mm Cutting Width / HARDOX / NEW / In Stock & Immediately Available Price: €3,330.00 net / €3,962.70 gross - Suitable for excavators up to: 12 t - Approx. own weight: 450 kg - SAE volume: 540 liters - Cutting width: 1,500 mm - Back width: 900 mm - Bucket made entirely from HARDOX (not just the cutting edge) Advantages of the Holp Profile Bucket: - No damage while rotating the bucket thanks to chamfered corners - Optimal design with multiple bends - Robust substructure - Minimal weight due to optimized construction - Excellent material flow in the bucket - Extended bucket floor for optimal filling - Reinforced cutting edge made from Hardox 450 When precision is required, the profile bucket delivers the perfect finish in any workflow: No other bucket shapes and profiles with such precision and achieves comparable efficiency in execution as this expertly engineered special-purpose bucket. We stock many other immediately available Holp products in our warehouse! Feel free to contact us at / . Financing offers available upon request. We are an official Holp distribution and service partner. We are an official Magni telehandler distribution and service partner. We are an official OilQuick distribution and service partner. We are an official Weber MT distribution and service partner. We are an official DMS distribution and service partner. We are an official Seppi M. distribution and service partner. We are an official Westtech distribution and service partner. We are an official JCB construction equipment distribution and service partner. We are an official Mercedes-Benz distribution and service partner. We are an official Iveco distribution and service partner. Additionally, with 800 used commercial vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the full Holp range! Errors and prior sale excepted. = More information = New: Yes Pgsdpfx Aeyl Hfvoflep Application: Construction Unladen weight: 450 kg Please contact Marius Herden for further information.

Condition: used, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ...). Holp MultiGrip Bucket / MG.022.055 / MS01 / 550 mm cutting width / HARDOX / NEW / in stock & immediately available Price: €2,400.00 net / €2,856.00 gross - Suitable for excavators up to: 2.2 tons - Weight approx.: 80 kg - SAE capacity: 53 liters - Cutting width: 550 mm - Max. opening: 530 mm - The bucket is manufactured entirely from HARDOX. - The MultiGrip combines a digging bucket and a grab in a single attachment. Advantages of the Holp MultiGrip Bucket: - Cylinder with hardened piston rod - Only the grab rotation lines are required for operation - Robust bearing within the side wall - Secure gripping and transport Psdpfx Aoyl Hdloflegp - Sturdy shafts connect both claws (forming a three-point grip for smaller items) - Significantly lighter than a grab - Can hold up to 30% more soil during digging operations compared to standard buckets - Reduces damage from falling debris The MultiGrip is suitable for all digging and grabbing tasks, making it ideal for relocating stones, backfilling soil, as well as gripping wood and brush. It operates significantly faster than a conventional grab. It can pick up and sort all kinds of material, including soil and grass. Thanks to its unique shape, the MultiGrip bucket offers superior penetration and handles bulky material with ease. We stock many more immediately available Holp products in our inventory! Feel free to contact us at ... We are also happy to provide you with a financing offer upon request. We are an official sales and service partner for: - Holp - OilQuick - Weber MT - Magni telehandlers - DMS - Seppi M. - Westtech - JCB construction machinery - Mercedes-Benz - Iveco With 800 used vehicles in stock, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Holp range! Subject to errors and prior sale. == More Information == New: Yes Application: Construction Unladen weight: 80 kg For more information, please contact Marius Herden.

Condition: used, For inquiries regarding the attachment, Mr. Herden will gladly assist you (by phone at ...). Holp MultiGrip Bucket / MG.015.050 / MS01 / 500 mm Cutting Width / HARDOX / NEW / In Stock & Immediately Available Price: €2,350.00 net / €2,796.50 gross - Suitable for excavators up to: 1.5 t - Own weight approx.: 55 kg - Capacity (SAE): 33 liters - Cutting width: 500 mm - Maximum opening: 340 mm - The bucket is made entirely from HARDOX steel. - The MultiGrip combines both a trenching bucket and a grabber into one single attachment. Advantages of the Holp MultiGrip Bucket: - Cylinder with hardened piston rod - Only the grabber rotary circuit lines are required for operation - Robust side wall mountings - Secure gripping and transport - Sturdy shafts connect the two fingers (providing a 3-point grip for small items) - Significantly lighter than a standard grabber - Up to 30% more soil can be taken into the bucket during digging - Minimizes damage from falling material The MultiGrip is suitable for all digging and gripping applications; it is ideal for placing stones, backfilling earth, and picking up wood and brush—while being significantly faster than a grabber. It can pick up and sort all types of materials, including soil and grass. Thanks to its unique shape, the MultiGrip bucket offers optimal penetration and copes well with bulky material. We have many other Holp products in stock and ready for immediate delivery! Simply contact us at / . We are also happy to provide you with a financing offer on request. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Magni telehandler sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction machinery sales and service partner. Podpfxsyl Hdfs Afljgp We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used commercial vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the entire Holp product range! Errors and interim sale excepted! = More Information = New: Yes Application: Construction Contact Marius Herden for more information.

Year of construction: 2025, condition: new, functionality: fully functional, - 350 mm max. cutting height Psdpohkh Npofx Afljgp - 75-250 mm min/max Cutting width - 100 - 350 mm min/max logs - 18-80 mm side board - 1,8 - 6m Cutting length - 550 mm saw blade diameter - 4/6 saw cuts simultaneously - 5-30 m/min variable feed speed - 2x30 KW and 2x22 KW saw motors - 3 KW SEW feed gear motor - automatic 6-fold width adjustment - infeed table with 3 fold turning device - 2 centering roller pairs pneumatic pressure - driven infeed roller with 0,75 KW and pneumatic pressure - 2 driven outfeed roller pairs with 0,55 KW each - 4 pneumatic pressure roller pairs in the outfeed

Year of construction: 2024, condition: new, The plant is available immediately ! - suitable for log diameters from 10 cm up to 50 cm - suitable for 2 - 6 m log length Pjdpsgvu Alefx Afljgp - 4-strand infeed conveyor 6 m long - 4 - strand separator 2 m long - 4 - strand separator 2 m long - Conveyor with pin conveyor chain M 112 with gentle rollers - block conveyor with 2 inch chain and flights - Special carrier for low-noise transport - Measurement with 1 mm resolution - Measuring frame with additional heating and sunshield - Display of all operating states on a 17" monitor - Fully automatic sequence control - Various storage options and sorting criteria - 5 ejectors right/left via SEW gear motors with brake - Spacious heat-insulated control cabin - 4 monitoring cameras with flat screen - Control cabinet with all cables - Sorting criteria according to agreement

Year of construction: 2024, condition: new, - 340 mm cutting height - 70-250 mm max. cutting width - 500 mm passage width - 6000 mm cutting length - 3-20 m/min - 2 x 18.5 kW sawing motor - 1.1 kW feed motor - 0.25 kW width adjustment motor - 1300 kg weight Pgjdj E Rg Sjpfx Aflsp

Year of construction: 2024, condition: new, 2.5 - 6 m Cutting length - 120 - 450 mm max. cutting height Pgsdpsgp Su Eofx Aflop - 80 -250 mm cutting width - infeed table with centering rollers - infeed table with log turning device - saw with 6 - fold width adjustment - draw-out bridge with 2 driven draw-out rollers - Pull-out bridge with 5 pairs of pressure rollers - 650 mm saw blade diameter - 2 x 37 KW saw motors below - 2 x 30 KW saw motors above - 6 saw cuts - 4 KW SEW feed gear motor - 5- 30 m/min stepless feed speed

Condition: used, Year of construction: 2012, Screw compressor MARK MSA 15 Max. operating pressure: 10 bar Complete with refrigerant dryer and 500 L compressed air tank Pgedpfxoycfxvo Aflep Weight: 445 kg Motor: 15 kW Air delivery: 119 m³/h Connection: 400 V, 3-phase

Condition: used, Year of construction: 1992, used wide belt sander MS95-150 incl. conversion Technical data: Year of manufacture: 1992 Manufacturer: Johannsen The machine is under power and can be inspected by appointment! Table size approx.: 2360 x 950 mm Sanding belt height approx.: 1000 mm Max. sanding area: 2000 x 850 mm Passage under sanding belt: approx. 340 mm Throat approx.: 550 x 310 mm Belt speed: 11 + 22 m/sec Belt drive motor: 4 / 5.5 kW Belt dimensions: 150 x 7000 mm Max. table load: 80 kg – Table may only be adjusted when unloaded – Extraction nozzle left, horizontal, D: 180 mm Required extraction capacity/h, min.: 2400 m³ Operating voltage: 400 V, 50 Hz Machine color: RAL 6011 reseda green Manually operated For processing steel, stainless steel, and brass Not suitable for aluminum and titanium Machine equipped as follows: Double-sided throat Pole-changeable belt drive motor Laminated wood table slats Contact roller sanding unit complete with rubber contact roller D 100 x 145, approx. 50° Sh Additional sanding shoe approx. 150 mm long with bracket for mounting in the U-bracket Pgodpfxjyfga Tj Aflop

Condition: used, Year of construction: 2018, Magnetite SM 1050 iron gray / Podpfjt A T Ahex Aflogp

Condition: used, For enquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ...). HS Schoch Root Rake / MS08 / 1,500 mm / HARDOX / available immediately / NEW Price: €3,490.00 net / €4,153.10 gross - Cutting width (mm): 1,500 - Own weight (kg): 265 kg - Carrier machine operating weight (t): 7 – 9.5 - Number of tines: 5 - Tine thickness (mm): 25 MS08 mount included. Pgsdpfxeyhynas Aflep The root rake is manufactured entirely from HARDOX. Tooth system: ESCO V17VY. We have a very large selection of various brush & root rakes in our warehouse, all available for immediate delivery! Mr. Herden (phone ...) will be happy to assist you. On request, we are pleased to provide you with a financing offer. We are an official Westtech sales and service partner. We are an official Magni telehandler sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete HS Schoch product range! Errors and prior sale excepted! = Further Information = New: Yes Intended use: Construction Unladen weight: 265 kg Contact Marius Herden for further information.

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, working width: 1,500 mm, sheet thickness (max.): 1 mm, TECHNICAL DETAILS Pgedpfx Afjx I Egrolep Sheet width: 1,500 mm Sheet thickness: 1.5 mm

Condition: excellent (used), Year of construction: 2015, operating hours: 1,884 h, PROD. BRAND TYPE MSA 15 500AD2000 Psdpfx Afsyi A Arjlsgp S/N CAI857781 YEAR 2015 POWER (kW) 15 CAPACITY (m3/min) 1.79 PRESSURE (bar) 10 HOURS (LOAD/TOTAL) 1884/8665 FREQUENCY INVERTER no BUILT-IN DRYER yes HEAT EXCHANGER no COOLING (AIR/WATER) air ON TANK yes, 500 l DOCUMENTATION yes NEW/USED USED

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 330 kg, volume flow: 100.8 m³/h, pressure (max.): 10 bar, type of cooling: air, hopper volume: 500 l, Equipment: documentation/manual, refrigerant dryer, type plate available, PROD. MARK Pgjdpovrcnvefx Aflop TYPE MSM15D TM500 S/N ITJ874646 YEAR 2024 CAPACITY (kW) 15 OUTPUT (m3/min) 1.68 m3/min CIS (bar) 10 BUILT-IN DEHUMIDIFIER YES ON 500L TANK DOCUMENTS YES NEW/USED NEW

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 315 kg, volume flow: 85.2 m³/h, pressure (max.): 10 bar, hopper volume: 500 l, Equipment: documentation/manual, refrigerant dryer, type plate available, PROD. MARK TYPE MSM11 D TM500 S/N ITJ874644 YEAR 2024 CAPACITY (kW) 11 OUTPUT (m3/min) 1.42m3/min CIS (bar) 10 HRS (DOC/GENERAL) 0 INVERTER NO BUILT-IN DEHUMIDIFIER YES ON TANK YES 500L DOCUMENTS YES Pjdpfx Aevrfdtjflsgp

Condition: new, sheet thickness: 6bending length: 2550upper roll diameter: 190prebending: 5sheet length: 2550Model MRM-S 3 rollers Motorized asymmetric plate bending machines Steel welded frame - Motorized adjustment of the rear roller Pjdpfsflvl Aox Aflegp Options: Hardened rollers         1.800,- Extended roller shafts:    500,- Role segment:              750,- Digital display:           800,- All prices excluding VAT

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: H2X388H00739, Year of construction: 2017, operating hours: 10,482 h, load capacity: 5,000 kg, lifting height: 5,000 mm, fuel type: electric, mast type: simplex, construction height: 3,454 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 5,000 kg Lifting height: 5,000 mm Overall height: 3,454 mm Mast type: Simplex Drive type: Electric ISO class: 3 Battery Battery type: Hoppecke 80 V 6 HPZS 930 Battery voltage: 80 V Battery capacity: 930 Ah Battery cells: 40 Battery weight: 2,180 kg Electrolyte content: 419 l MACHINE DETAILS Nominal voltage: 80 V Nominal drive power: 2 × 12.5 kW Self-weight: 6,110 kg Permissible battery weight: 2070 - 2287 kg EQUIPMENT - Side shifter - 3rd valve - 4th valve - Heater - Full cab - Air conditioning External reference: SL12953SP Pgsdpfx Aeznu Hljflsp

Condition: ready for operation (used), * Brand: RN Maschinenbau * Surface: length 5000 mm, width 1400 mm - 2 decks * Driving: 15 kW E-motor Pgjdpfxozqdczj Aflop

Year of construction: 2021, condition: excellent (used), functionality: fully functional, machine/vehicle number: C115101, Four CSF Inox (Italy) hygienic centrifugal pumps, year 2021, professionally decommissioned from an INEOS production facility by qualified engineers. In service for under 12 months — excellent, near-new condition. Four pumps available across three models: Pjdpjzmt Ufjfx Aflegp 1 x CS 32-110-2-1/BD — 0.75 kW, 1–12 m³/h at 1.6 bar, 1.5" tri-clamp 2 x CS 32-145-2-1.5/BD — 1.1 kW, 1–13 m³/h at 2 bar, 1.5" tri-clamp 1 x CS 50-175-2-10/BD — 7.5 kW, 1–54 m³/h at 4.1 bar, 2.5" inlet / 2" outlet tri-clamp All units: 316L stainless steel, 6-vane open impeller, EHEDG/3A hygienic design. ATEX pump II 3G Ex h IIB T4...T3 Gc with Orange1 Ex db IIC T4 Gb flameproof motors, IP66, inverter duty. Suitable for solvent, fragrance, cosmetics, food, beverage and pharmaceutical duties in hazardous areas. Available individually or as a set. Tracht Ltd supplies hygienic and sanitary process equipment. Viewings by appointment; collection and delivery can be arranged. Sold EXW Manchester, UK. Price on request. Please send an enquiry for individual quotes or a package price for the full set — we respond quickly.

Condition: used, functionality: fully functional, Year of construction: 2009, operating hours: 9,771 h, load capacity: 5,000 kg, lifting height: 4,000 mm, load center: 700 mm, fuel type: diesel, mast type: duplex, Equipment: lighting, - Full cab, windshield wiper - Ready to drive and operate - New turbocharger - Driver's side window missing - 2 work lights on the roof - 2 work lights on the mast - Good tires (SE) Psdpfxozp N Uyj Aflogp Price upon request.

Condition: good (used), machine/vehicle number: 3039, Year of construction: 2001, load capacity: 35,000 kg, lifting height: 7,000 mm, mast type: duplex, fork carriage width: 300 mm, fork length: 2,400 mm, total length: 7,000 mm, total width: 3,680 mm, operation weight: 47,850 kg, additional equipment features: Dual tread, Weight system, Equipment: lighting, SveTruck 35120-50 from Uniktruck Wheel type – Drive wheel: Pneumatic Wheel type – Steering wheel: Pneumatic Wheel size – Drive wheel: 16.00-25 Pgedpjyuh E Nefx Afljp Wheel size – Steering wheel: 16.00-25