Used Camam 2-Spindle Vertical Drilling Machine for sale (113,319)

Condition: good (used), Year of construction: 1983, Spindle diameter: 200 mm Machining width: 6000 mm Machining height: 3150 mm Max. machining depth: 1985 mm Slide cross section: 530 x 550 mm Table load capacity: 20 t Plate field size: 11200 x 5550 mm Tool holder: SK 60 Machine weight approx.: 173 t Additional information: - Additional equipment: large and small angular heads - Listing No.: 22979 - The table is model S20 MP, size: 2200 x 2500 mm - The machining width on the X-axis of the machine is 6000 mm - Including 6 plates measuring 5600 mm x 1850 mm Bljdpfx Aozxxmweqwel

Condition: excellent (used), Year of construction: 1998, Hofmann HT 200 U frame dowel and elongated hole drilling machine with adjustable angle. Special drilling machine for staircase construction, window construction and universal applications through pneumatic height adjustment. Angled dowel drilling and picket drilling can be easily performed using the rotating drilling unit. Motor with pole change, two speeds Motor power 1.5 / 1.8 kW, 1400 / 2800 rpm Motor start with a practical handle switch Precision chuck with two inserts, 16 mm and M10 thread Table size approx. 1100 x 240 mm Linear laser for precise positioning of the workpiece Drilling unit can be rotated 65 degrees to the left and right Bledoyfta Tspfx Aqwol Pneumatic adjustment of the machining height, dowel drilling on two levels without retooling The desired drilling heights can be set for each drilling level using a handwheel and digital counter; switching then takes place pneumatically from the front Cross adjustment approx. 320 mm, stepless or in a 12 mm grid Drilling stroke approx. 200 mm 2 pneumatic workpiece clamps, can be positioned at the front and rear of the table 2 swiveling workpiece supports 2 side stops, can also be used as a front support Undercarriage Dust extraction connection 80 mm 4 used but good drills 9, 12, 16, 19 mm Few paint spots have been touched up, very good condition, see original photos. A used swiveling elongated hole drilling machine in this condition is rarely available. CE marking Operating manual Dimensions approx. 1200 x 1200 x 1200 mm (L x W x H), weight 310 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are stored in our warehouse, see "other offers from this supplier".

Condition: excellent (used), Year of construction: 2015, bore capacity in steel (diameter) 40.0 / 50.0 mm throat 300 mm bore stroke 160 mm turning speeds 200 - 3200 U/min table: 615 x 430 mm bore spindles - Morse Taper 4 Kurzspindel MK column diameter 145 mm feed 0.1-0.2-0.3-0.4 mm/U distance spindle /table 147 / 688 mm engine output 1.8 / 2.9 kW weight 450 kg Current list price: approx. 20.000 euros Special price available upon request Features: Blsdpfx Aqszw N Ehewol - Robust column drill press * Drive: V-belt - VARIO - Automatic spindle feed * with electromagnetic feed clutch * 4 feed speeds: 0.1-0.2-0.3-0.4 mm/U * with electric cross-handle control - swivel work table * 1 station clamping table with 2 T-slots * 1 station with ALZMETALL vise - stepless speed adjustment - Digital speed display - Adjustable drilling depth stop - Pole-reversible drive motor - Clockwise rotation of the drill spindle - Main switch Emergency Stop button - User manual (PDF)

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Equipment: documentation/manual, Deckel Maho DMC 103V Vertical Machining Center The machine is in good condition and can be inspected while powered on at any time. Technical data: Year of manufacture: 2003 Control system: Heidenhain TNC 426 / 43 Travel ranges: X: 1000 mm Y: 600 mm Z: 600 mm Spindle: 10,000 rpm Tool holder: SK40 ATC with 24 positions Table: 1200 x 600 mm Blsdpfozw U Rcox Aqwol Weight: approx. 6,750 kg Dimensions: 410 x 242 x 275 cm Accessories and options: Coolant tank Electronic handwheel with 3D path control Cooling system with compressed air Operating mode 4 Documentation

Condition: used, CNC CONTROL Controller: Fanuc 32i X-axis travel mm: 635 Y-axis travel mm: 510 Z-axis travel mm: 460 Distance spindle nose - table surface mm: 120 - 580 Table dimensions mm: 790 x 560 Bjdpfxjzxivve Aqwsll Max. table load kg: 600 Max. spindle speed rpm: 8.000 Spindle taper / interface: SK 40 Tool holder / taper: SK 40 Tool magazine capacity: 20 Under power hours: 6.313 Spindle working hours: 2.999

Condition: good (used), Year of construction: 2006, functionality: fully functional, CNC machining center Hedelius BC 100 P-3500 Magnum Control system: Siemens Sinumerik 840D Year of manufacture: 2006 Internal machine number: 4 Location: Netherlands Travel ranges: X-axis: 3,500 mm Y-axis: 1,000 mm Z-axis: 770 mm Clamping area: 4,150 x 1,000 mm T-slots: 5 pieces Distance between T-slots: 200 mm Table height above floor: 730 mm Table load: approx. 4,000 kg Tool holder: DIN 69871 SK 50 Tool magazine: 50 stations Bledszw Dcnepfx Aqwsl Spindle speed: 20 - 4,500 rpm Accessories: - Automatic door - Operating panel - Machine hood - Chip conveyor

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, CNC machining center Hedelius MC 40 -1800 Control system: Heidenhain iTNC 530 Year of manufacture: 2006 Internal machine number: 63 Travel distances: X-axis 1,800 mm Y-axis 420 mm Z-axis 480 mm Clamping area: 2 x 1,000 x 420 mm Bsdpfx Aozw Apmjqwoll Tool holder: SK 40 Tool magazine: 20 positions Accessories: - High-pressure filter system KM 350 with cooling lubricant system - Handwheel - Chip conveyor - Renishaw RMI prepared - Table probe Renishaw TS27R - Partition - Magnetic clamping plate

Condition: excellent (used), Homag Drillteq 050, vertical CNC drilling and milling machining center. Working area: Length X: 2500 mm Width Y: 850 mm Thickness Z: 60 mm 5 kW milling spindle 8 vertical drilling spindles, Bjdpezx S Nfofx Aqwoll 6 horizontal drills (4 drills on the X-axis, 2 drills on the Y-axis), X-axis grooving saw, Software: Homag Woodwop 7.1 Machine in very good condition, Year: 2019 Few operating hours CE marking Weight: 1750 kg

Condition: used, Year of construction: 1980, machine/vehicle number: 18798, Item No. 25046 High-performance pillar drill Technical data: Bodpfxszxdhas Aqwell - Drilling capacity in steel ST 60: 28 mm - Drilling capacity in steel ST 60: 32 mm - Drill spindle mount: MK 3 long spindle - Drill spindle stroke: 180 mm - Continuously variable drill spindle speeds - Adjustable – Stage 1: 65 – 240 rpm - 130 – 480 rpm - Stage 2: 240 – 875 rpm - 480 – 1750 rpm - Overhang: 290 mm - Max. distance table – drill spindle: 620 mm - Table with 2 T-slots: 450 x 450 mm - Table with reversible function and permanently mounted machine vise - Table height adjustment via rack and pinion with hand crank - Drive: 400 V / 0.9 / 1.3 kW - Space requirement: approx. W 660 x H 1900 x D 700 mm - Weight: approx. 300 kg - Includes: - Quick-change drill chuck 1-13 mm

Condition: used, Year of construction: 2010, machine/vehicle number: 1780021340, Order No. 26305 Three-spindle copy milling machine Technical data: - Operation via two-hand lever - Material clamping via pneumatic clamping cylinder - Workpiece width / clamping range B 115 x D 100 mm Bjdozxc Swepfx Aqwsll - Milling area above, to stop / copy template B 340 x D 100 mm - Stroke above D 110 mm - Milling area below, to stop / copy template B 240 x 90 mm - Stroke below, front / rear 95 / 45 mm - Spindle speed 12000 rpm - Metering spray device - Air consumption per working cycle - Without spraying 12 liters - With spraying 24 liters - Left + right original material support - Drive 400 V / 0.75 kW - Space requirement approx. B 900 x H 1400 x D 1250 mm - Weight approx. 300 kg

Condition: used, Year of construction: 2007, RÖDERS RFM 600 with RCE 1 – High-speed machining center – 42,000 RPM – only approx. 1,370 operating hours For sale is a high-quality vertical high-speed machining center, a RÖDERS RFM 600 with RCE 1, manufactured in 2007. (An RFM 600 from 2003 is also available at the same location.) The machine is ideally suited for the highly precise machining of graphite, aluminum, non-ferrous metals, as well as hardened tool steels, and is used primarily in the tool, mold, and precision machinery industries. Technical data: Year of manufacture: 2007 Travel distances X/Y/Z: 600 / 450 / 300 mm Table: 700 x 550 mm RÖDERS CNC control HSK-40 spindle Spindle speed up to 42,000 RPM 20-position tool changer Max. workpiece weight 400 kg Bedpozk Eu Ssfx Aqwsll Machine weight approx. 6.5 t Equipment: RCE 1 rotary tool changer Smoke extraction Well-maintained overall condition Only approx. 1,370 operating hours Ideal for tool and mold making, electrode manufacturing, graphite machining, precision milling, and HSC/high-speed cutting. The machine can be inspected under power after prior appointment. Location: Germany Subject to prior sale. _____ Subject to prior sale and errors in the technical data. The technical data has been compiled to the best of our knowledge but does not constitute guaranteed characteristics. Our general terms and conditions apply; the seller is not liable for typing or data transmission errors. The appearance of the offered items corresponds to their age and the images shown. The technology and wear of the offered items are in accordance with their age. Used machines are sold exclusively to commercial customers and without warranty.

Condition: used, Year of construction: 2010, HEDELIUS C 50-1800 – Vertical CNC Machining Center – Year of Manufacture 2010 – HEIDENHAIN iTNC530 For sale is a high-quality vertical CNC machining center, the HEDELIUS C 50-1800, manufactured in Germany. This machine is ideally suited for tool and mold making, general mechanical engineering, as well as precise single-part and series production. The HEDELIUS impresses with its robust design, proven HEIDENHAIN control system, and large travel range, combined with a compact footprint. Technical Data Manufacturer: HEDELIUS Type: C 50-1800 Year of Manufacture: 2010 CNC Control: HEIDENHAIN iTNC 530 Travel (X/Y/Z): 1,800 x 510 x 480 mm Table Size: 2,100 x 510 mm Spindle Taper: SK 40 Spindle Speed: up to 8,000 rpm Tool Magazine: 20-position Max. Tool Length: 250 mm Max. Tool Diameter: 63 mm Distance Spindle – Table: 570 mm Machine Weight: approx. 5,500 kg Equipment HEIDENHAIN iTNC530 CNC control Bsdpfezk Etnsx Aqwjll 20-position tool changer Coolant system CE marking Condition The machine is in overall good and well-maintained condition. The documented spindle operating time is approximately 9,800 hours. An inspection under power is possible by appointment. Location: Germany _____ Subject to prior sale and errors in the technical specifications. The technical data has been compiled to the best of our knowledge, but does not constitute guaranteed characteristics. Our general terms and conditions apply; in addition, the seller is not liable for typographical or data transmission errors. The appearance of the offered items corresponds to their age and the images shown. The technology and wear of the offered items are consistent with their age. Used machines are sold exclusively to commercial enterprises and without warranty.

Condition: used, Year of construction: 2005, Hedelius C60-2500 CNC machining center – spindle running time: 9,546 h Bledpfx Ajzc Rlhsqwel Manufacturer: Hedelius Type: C60-2500 Year of manufacture: 2005 Control system: Heidenhain Location: Bremen Technical data: Travel in X: 2,500 mm Travel in Y: 620 mm Travel in Z: 500 mm Table surface area: 3,000 x 600 mm Spindle speed: 8,000 rpm Rapid traverse / feed rate: up to 30,000 mm/min Machine weight: approx. 12,000 kg Operating hours: Control system ON: 40,045 h Machine ON: 44,393 h Program running time: 10,019 h Spindle running time: 9,546 h Equipment: Heidenhain CNC control system 4th axis: See photos (this was installed on this machine approximately 10 years ago and then stored. None of the current operators know how or if the device works.) Full enclosure Electronic handwheel Coolant system Work area lighting Chip tray The machine is in operation and can be inspected while powered on after prior arrangement. With an X-axis travel of 2,500 mm and a table surface area of 3,000 x 600 mm, the machine is particularly suitable for machining long workpieces in machine, tool, jig, and steel construction. The comparatively low spindle running hours of only 9,546 hours are particularly noteworthy. The Hedelius C60 stands for robust German engineering quality, high precision, and a durable design. Inspection is possible at any time in Bremen by appointment. _____ Subject to prior sale and errors in the technical data. The technical data has been compiled to the best of our knowledge, but does not constitute guaranteed characteristics. Our general terms and conditions apply; in addition, the seller is not liable for typographical or data transmission errors. The appearance of the offered items corresponds to their age and the images shown. The technology and wear of the offered items are consistent with their age. Used machines are sold exclusively to commercial enterprises and without warranty.

Condition: used, Year of construction: 2021, operating hours: 7,246 h, travel distance X-axis: 550 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, rotational speed (min.): 10,000 rpm, spindle speed (min.): 20 rpm, Equipment: chip conveyor, CNC machining center, used Manufacturer: DMG MORI Type: M1 - Plus Year of manufacture: 2021 Purchase / Acceptance: May 26, 2022, as a demonstration machine Operating hours: Spindle: 4,049 h Total: 7,246 h Control system: Siemens Sinumerik 828D + Job Shop Working area: X-axis travel: 550 mm Y-axis travel: 550 mm Z-axis travel: 510 mm Spindle: Speed: 20 - 10,000 rpm Power: 13/9 kW Mount: SK 40 DIN 69871 Tool changer: 24-position Equipment: - Renishaw 3D probe - Renishaw tool probe - Chip conveyor, left side Bodpfx Aozbvqgjqwell - Coolant gun

Condition: good (used), Year of construction: 1999, operating hours: 76,863 h, functionality: fully functional, controller manufacturer: Heidenhain, controller model: TNC 426, Equipment: chip conveyor, Title: 5-Axis Machining Center Deckel Maho DMC 125U L55, Year of Manufacture 1999, with Pallet Changer (5 Positions) Condition: good, technically and visually well-maintained, currently still in full productive use Year of Manufacture: 1999 Location: West Saxony Price: Negotiable Technical Data: Manufacturer: Deckel Maho GmbH, Pfronten Type: DMC 125U L55 Machine No.: 1110 000113 Control: Heidenhain TNC 426 5-Axis version with rotary table (B and C axes) Blodszxzgaepfx Aqwjl Pallet changer with 5 pallet positions Integrated chip conveyor system Separate coolant/hydraulic unit Operating Hours: approx. 76,863 h Spindle Hours: 4,200 h Description: For sale is a 5-axis universal machining center Deckel Maho DMC 125U L55, year of manufacture 1999, with Heidenhain TNC 426 control. The machine features a rotary table with B and C axes for complete 5-axis machining of large workpieces, as well as a pallet changer with 5 positions for efficient, automated workpiece changes. A hall crane is also available at the location, which can be used for transporting and handling the workpieces if required. Condition is good, both technically and visually, with approximately 76,863 operating hours. The machine is currently still in full productive use and can be made available on short notice. Inspection and test run at the location in West Saxony can be arranged. Special Note: If there is sufficient interest, it is also possible to take over the entire production hall, including other machining centers, as a complete package. If you are interested in a complete takeover, please feel free to contact us. Price: Negotiable

Condition: used, Year of construction: 2012, x-travel 1630 mm y-travel 762 mm Blsdpfx Ajzw N E Ioqwol z-travel 650 mm control FANUC 0I-MD Spindle speed 12000 min -1 weight of the machine ca. 13 t

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, feed length X-axis: 3,200 mm, feed length Y-axis: 800 mm, feed length Z-axis: 600 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, controller manufacturer: HEIDENHAIN, controller model: TNC 530, workpiece weight (max.): 3,300 kg, table width: 750 mm, table height: 720 mm, table length: 3,900 mm, rotary table diameter: 315 mm, overall weight: 16,500 kg, spindle speed (min.): 30 rpm, spindle speed (max.): 8,000 rpm, spindle motor power: 25,000 W, spindle nose: ISO 40 DIN 69871, number of spindles: 1, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, - Lowered worktable by 185 mm - Spindle-to-table distance: 325/925 mm - Maximum tool length: 330 mm - 4-position PICK UP tool changer station for drills with a length of up to 700 mm - Coolant system with passage through the spindle at 30 bar, with paper filter - Drag-type chip conveyor - CNC table diameter: 315 mm Bljdpfxszycaws Aqwjl - Prepared for indexing operations - CE marking

Condition: used, machine/vehicle number: 007842, X axis working area: 5000 mm Y axis working area: 1200 mm Working Table: Pod and Rail Main Electrospindle power: 18 KW Number of controlled axes: 4 axes Bodjyhbiuspfx Aqwjll Maximum edge height: 64 mm Total number of drilling spindles: 14 Total number of tool changer positions: 18

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, CNC machining center Hedelius T7 – 2600 1 R including standby magazine Control system: iTNC 640 Year of manufacture: 2017 Bedpfx Aqezwut Dowell Internal machine number: 68 Travel distances: X-axis vertical/horizontal 2,600 / 2,030 mm Y-axis 750 mm Z-axis vertical/horizontal 695 / 800 mm Swivel range: -98° to +98° Swivel operation: 760 / 1,300 mm Total clamping area 3,080 x 750 mm Table load: approx. 2,500 kg Integrated rotary table Ø 750 mm Interference circle diameter 1,100 mm Tool holder: SK 40 Tool magazine: 33-position Standby magazine: 180 pieces Celox motor spindle: 50 - 12,000 rpm Power: 29 kW Equipment: - KinematicsOpt TNC640 - Handheld control unit HR 510 - Compressed air nozzle on the spindle head - Internal compressed air supply - Inclined bed coolant system 900 l - Internal coolant supply (IKZ) 25 bar - Infrared receiver M & H - 3D infrared measuring probe M & H 25.50 - Exhaust filter - Blow-off guns - Flushing guns

Year of construction: 1993, condition: ready for operation (used), Vertical lathe machining centre Dörries Scharmann type: VCE 2000/160 Pallet size: 1.600 mm Pallet load: max. 8.000 kg Number of pallets 13 pcs Table indexing C-Axis 0.001° Bledpfoguk S Ssx Aqwjl Table cross travel (X) 2.300 mm Column longitudinal travel (Z) 1.500 mm Crossbeam positions: 9 steps off 100 mm Feed X/Y/Z 1 – 6.000 mm/min. Rapid X/Y/Z 8 m/min. Max rotary diameter 2.000 mm Max workpiece height 1.500 mm Main Spindle Spindle drive motor: 69KW Spindle speed: 2.8 – 315 rpm ATC for turning 59 pots - system 240.2 Live spindle – SK50 Spindle drive motor: 30KW Spindle speed: 10 – 1500 rpm ATC for SK50 61 pots CNC controller Siemens Sinumerik 880M Accessories FMS 13 pallets Rotary loading stations 2 pcs Coolant unit with filtration system Coolant through spindle Machine weight Approx 40T. Build year 1993

Year of construction: 1993, condition: ready for operation (used), Vertical lathe machiningcenter Dörries Scharmann Type: VCE 2000/160 Pallet size: 1.600 mm Pallet load: max. 8.000 kg Number of pallets 13 pcs Table indexing C-Axis 0.001° Table cross travel (X) 2.300 mm Column longitudinal travel (Z) 1.500 mm Crossbeam positions: 9 steps off 100 mm Feed X/Y/Z 1 – 6.000 mm/min. Rapid X/Y/Z 8 m/min. Max rotary diameter 2.000 mm Max workpiece height 1.500 mm Bodpfxjgulkij Aqwjll Main Spindle Spindle drive motor: 69KW Spindle speed: 2.8 – 315 rpm ATC 70 pots - system 240.2 Live spindle – SK50 Spindle drive motor: 30KW Spindle speed: 10 – 1500 rpm CNC controller Siemens Sinumerik 880M Accessories FMS 13 pallets Rotary loading stations 2 pcs Coolant unit with filtration system Coolant through spindle Machine weight Approx 40T. Build year 1993 (2/2)

Condition: excellent (used), Year of construction: 1972, Description to follow! Bledpezxh Ttofx Aqwol

Condition: excellent (used), Year of construction: 1999, x-travel 500 mm y-travel 400 mm z-travel 400 mm Bodjzxh Tajpfx Aqwsll

Condition: excellent (used), Year of construction: 2017, operating hours: 15,200 h, functionality: fully functional, machine/vehicle number: P172ZH357, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, nominal power (apparent): 11 kVA, overall weight: 2,200 kg, spindle speed (max.): 24,000 rpm, coolant supply: 40 bar, number of spindles: 1, number of slots in tool magazine: 21, Equipment: documentation/manual, Equipment: - FANUC DDR-T 4th axis digital rotary table with tailstock - high-pressure through-spindle coolant, 24,000 rpm - 200L chip conveyor with high-pressure pump - automated side door for robotic loading - machine under annual FANUC maintenance contract - optional extra: integrated Fanuc M20iA12L robot already mounted on the machine Bodjzhi R Sopfx Aqwsll

Condition: excellent (used), Year of construction: 2014, operating hours: 21,800 h, functionality: fully functional, machine/vehicle number: P147YH288, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, nominal power (apparent): 11 kVA, overall weight: 2,200 kg, spindle speed (max.): 24,000 rpm, coolant supply: 40 bar, number of spindles: 1, number of slots in tool magazine: 21, Equipment: documentation/manual, Equipment: - FANUC DDR-T 4th axis digital rotary table with tailstock - high-pressure through-spindle coolant, 24,000 rpm - 200L chip conveyor with high-pressure pump - automated side door for robotic loading - machine under annual FANUC maintenance contract - optional extra: integrated Fanuc M20iA12L robot already mounted on the machine Bjdpfozhi Nzex Aqwell