Used Chemagen Chemagic Msm I for sale (53,137)

Condition: used, Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel gripper, panel gripper, lifting claw, lifting clamp -Manufacturer: ip, safety lifting claw 6 IP -Clamping range: 0 - 40 mm Bedpsgtn Dfefx Ahmeln -Load capacity: 6 t -Dimensions: 250/110 / H550 mm -Weight: 26 kg

Year of construction: 2024, condition: new, The plant is available immediately ! - suitable for log diameters from 10 cm up to 50 cm - suitable for 2 - 6 m log length - 4-strand infeed conveyor 6 m long - 4 - strand separator 2 m long - 4 - strand separator 2 m long - Conveyor with pin conveyor chain M 112 with gentle rollers - block conveyor with 2 inch chain and flights - Special carrier for low-noise transport - Measurement with 1 mm resolution - Measuring frame with additional heating and sunshield - Display of all operating states on a 17" monitor Bljdpfxogvu Alo Ahmsn - Fully automatic sequence control - Various storage options and sorting criteria - 5 ejectors right/left via SEW gear motors with brake - Spacious heat-insulated control cabin - 4 monitoring cameras with flat screen - Control cabinet with all cables - Sorting criteria according to agreement

Year of construction: 2019, condition: new, machine/vehicle number: BI3, Annealing furnace for stress-free annealing and forming of acrylic glass The furnace has two doors on one side and two narrow doors with a rail system on the rear side. The sheets are hung in there and pneumatically clamped and released using a foot pedal. Bledpfx Aheb Nzycsmon - The furnace has a maximum temperature of 230°C and a permanent deviation of approximately +/-3°C from the set temperature at 75°C. - The internal dimensions are approximately 1600 mm wide x 2000 mm deep. In terms of height, the furnace can accommodate a 1800 mm high sheet hanging freely within the rail system. - The rail system can be seen in the attached images. The rail system can also be mounted on the front side. It can accommodate sheet thicknesses from 1.5 to 25 mm and support a sheet weight of up to 150 kg. - The power can be adjusted in several stages. - Air circulation of approximately 3,000 m³/h - For safety reasons, the doors can also be opened from the inside. - Safety device that also shuts off the heating in the event of a fan failure.

Condition: new, Year of construction: 2024, Drying and Burn-in Furnace TRO, Model I For drying racks with max. 50rods, useable size 60x90cm, outer dimensions: approx. 2290mm wide x 1390mm deep x 2230mm high, useable space: approx. 1400x1070x1660cm. Suitable for vaporisation of low amounts of solvent, authorised for inks and solvents up to hazard class A II, according to safety requirements DIN EN 1539. Equipped with control of the minimum exhaust volume and a heating system in regard to the exceedance of the max. temperature. Fixing and drying temperature: up to max. 180°C. Power connection: 400V/50Hz, 21kW, weight: approx. 650kg, varnishing: corps RAL 7035 (light grey), doors RAL 7037 (dust grey). Special varnishing upon request. Chamber dryer, all-steel construction, with good thermal insulation. Simple insertion of drying racks by means of easy-to-open wing doors. The air is sucked out of the drying chamber by ventilators, is blown through thermostat-controlled heating registers and re-fed temperature-controlled to the drying chamber. The solvents released during the drying process are dissipated from the exhaust side of the ventilator while supply air gets into the drying chamber. The horizontal air guide in the drying chamber guarantees an even temperature control. The required temperature can easile adjusted via actual and nominal value thermostat. Overheating protection by safety thermostat. Particularly suitable for fixing and drying of textile inks, flock glues as well as for burning-in of plate and aluminium signs up to 180°C. - Various drying racks for different applications available. - We recommend the installation of a gas warning unit. Delivery time 10-12 weeks. ATTENTION: Not permitted for solvents! Not permitted for foods! Bledped I T Exefx Ahmen

Condition: new, Product description: I-Beam Type Hanger Conveyors Conveyor Systems are one of the most important parts of the lines used in automatic coating plants. Our conveyor systems, which carries the parts to be painted in meters per day and kilometers per year, play an important role. Heavy parts to be coated are carried by webb conveyors which perform for long years with their long lasting bearings and steel cast chains. It has a wide carrying capacity range starting from 120 kg to 2 tons. • Operating principle of this type of conveyors is based on transferring suspended materials by chains and trolleys moving on a NPI profile by the help of a drive unit. • WEBB type conveyor chains are made of nodular cast iron or forged steel and subjected to heat treatment afterwards. • Special roller bearings used on trolleys are capable of operating at 200 °C. Greasers placed on trolley bodies provide lubrication for the system. • The drive system can be built based on either the caterpillar system or the gearwheel system, with safety switches and moving trolleys. • Conveyor speed can be easily adjusted by use of a frequency controller. Blodpedy Ewlefx Ahmsn • Chain tensioning system consists of skids and springs. Rollers and support wheels are used for band turns.

Year of construction: 2018, condition: good (used), coolant capacity 10 m3l/h Headroom 20 m operating pressure 2 bar voltage 230/400 V - 50 Hz motor speed 2900 U/min motor type 90 L engine output 2,2 kW weight 35 kg Standard suction centrifugal pump, Bodoub Utdjpfx Ahmeln Stainless steel housing and impeller, Flange connections, Serial No.: 22/04-140200

Year of construction: 2024, condition: new, Max. cutting length: 3,000 – 8,000 mm Min. cutting length: 500 mm Max. cutting height: 80 – 140 mm Continuously variable feed rate: 10 – 30 m/min Saw motor power: 4.0 – 7.5 kW Feed motor: 1.5 kW Bedpfjxfzljx Ahmsln Number of saw supports: 2 – 6 Weight: 1,000 – 2,500 kg

Year of construction: 2024, condition: new, - 340 mm cutting height - 70-250 mm max. cutting width - 500 mm passage width - 6000 mm cutting length - 3-20 m/min Bodpfxo E Rg So Ahmoln - 2 x 18.5 kW sawing motor - 1.1 kW feed motor - 0.25 kW width adjustment motor - 1300 kg weight

Condition: good (used), Interface converter, converter module -Type: i-7520 Price: per piece -Quantity: 2 available -Weight: 0.5 kg Bljdpob A I Rnofx Ahmon

Condition: used, mileage: 330,000 km, first registration: 06/2023, fuel type: diesel, fuel: diesel, brakes: VEB, gearing type: automatic, emission class: euro6, suspension: steel-air, Equipment: air conditioning, central locking, retarder, Road tractor, automatic transmission, Veb retarder, 330,000 km, side skirts, spoiler, air conditioning. Price listed above plus 22% VAT + transfer of ownership fee. Bledozrpgbepfx Ahmon

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: YV2RT60D8GB7554143, mileage: 313,500 km, first registration: 10/2016, fuel type: diesel, empty load weight: 15,600 kg, overall weight: 29,000 kg, axle configuration: 6x4, color: light grey, driver cabin: sleeper cab, gearing type: automatic, suspension: air, number of beds: 1, Year of construction: 2016, Equipment: ABS, AdBlue, Bluetooth, additional headlights, air conditioning, airbag, central locking, cruise control, electric window regulation, electronic stability program (ESP), fog lights, navigation system, onboard computer, parking air conditioner, parking heater, power assisted steering, tachograph, tire pressure monitoring, trailer coupling, 2016 Volvo FH 6x4 with a timber/log loader for containers, equipped with an Epsilon double telescopic loader crane. Well-maintained and ready for immediate use. Bledpfx Ajznd A Nohmon Technical Specifications: Manufacturer: Volvo Model: FH Configuration: 6x4 Year of Manufacture: 2016 Mileage: 313,000 km Engine Power: 405 kW / 551 hp Crane Manufacturer: Epsilon Crane Type: Double loader (telescopic) Crane Control: Joystick Remote Control: Yes Cooler: Yes Condition: Used, good condition Price: €199,000 Location: Latvia

Condition: used, functionality: fully functional, mileage: 276,300 km, first registration: 06/2023, fuel type: diesel, empty load weight: 8,041 kg, overall weight: 18,000 kg, tire condition: 40 %, axle configuration: 4x2, wheelbase: 3,700 mm, fuel: diesel, fuel tank capacity: 935 l, brakes: VEB, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of beds: 1, total length: 5,890 mm, total width: 2,518 mm, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 12,000 kg, Year of construction: 2023, Equipment: ABS, AdBlue, Bluetooth, additional headlights, air conditioning, central locking, differential lock, electric window regulation, fog lights, fridge, navigation system, onboard computer, parking air conditioner, parking heater, second fuel tank, spoiler, VOLVO FH13.500 Globetrotter I-Save Semi-trailer tractor unit 4x2 Leaf spring suspension at the front - air suspension at the rear Blsdpfsznk D Hox Ahmsn Differential lock Automatic transmission VEB-Plus GVWR 18,000 kg - Unladen weight 8,041 kg - Permissible total train weight 44,000 kg Overall truck length 5.89 m Wheelbase 3.70 m Sleeper cab with 1 berth Tires 40% tread ABS Euro 6 530L + 405L fuel tanks Spoiler Full fairing Sun visor Round lights Bluetooth Fog lights Central locking Air-suspended driver's seat Auxiliary air conditioning Auxiliary heater Air conditioning Navigation system Refrigerator Electric windows and exterior mirrors Radio All information is subject to change without notice / errors and omissions excepted.

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Edges thickness in stips / lippings (min/max) mm 0.8 / 20 Panels thickness (min/max) mm 8 / 60 Numerical Control ICOS Open Feeding speed (adjustable) m/min 6 - 30 Top pressure system with rubber belt Safety and sound-proof enclosures/cabins OPTIONAL: Panels in-feed system 63.152 (mm 500 x 500) In-feed fence, adjustable by N.C. Pre-milling Unit (vertical joint trimmers) 08.379 (2 x Kw 4,0) adjustable by N.C. Glueing Unit (EVA Glue) 283.1513 Band Pressure zone + Edge coils supporting unit (No. 1+2 reels) Snipping (end-cutting) unit 08.42/30/B (Kw 0,66 x 2) speed 30 m/min (0°-25°) Fine Trimming unit 08.055 (Kw 1,85 x 2) 0°-25° Multi Function Unit (Profile contour Trimming unit) SKF-L (2 x Kw 0,18) + (2 x Kw 0,4) Profile edge scraping unit 08.519 Bsdsyxl Sispfx Ahmeln Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.617-2 (Kw 0,18 x 2)

Condition: used, Year of construction: 2016, functionality: fully functional, travel distance X-axis: 660 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, controller manufacturer: Hurco, controller model: WinMax, workpiece weight (max.): 681 kg, total height: 2,519 mm, total length: 1,800 mm, total width: 1,671 mm, table width: 406 mm, table length: 762 mm, table load: 681 kg, overall weight: 2,818 kg, spindle speed (max.): 10,000 rpm, distance table to spindle center: 101 mm, distance table center to spindle nose: 610 mm, spindle motor power: 11 W, spindle nose: ISO40, number of spindles: 1, number of slots in tool magazine: 20, tool length: 25 mm, tool diameter: 89 mm, tool weight: 7 g, Equipment: chip conveyor, documentation/manual, Used Hurco VM10i vertical machining center, ideal for companies seeking precision, reliability, and productivity with a reasonable investment. This machine is perfect for mechanical workshops, subcontractors, and manufacturers of components for automation, automotive, hydraulics, and general mechanical applications. It features a robust structure, high precision, and excellent performance in milling, drilling, and tapping operations. The machine is in good working condition and ready for immediate integration into production. Available for inspection and testing at our facility. The machine is complete with: * Auger-type chip conveyor with side discharge * High-pressure pump * Digital manuals Blodpfxjzcpu Is Ahmen * CE declaration of conformity

Condition: used, mileage: 545,000 km, power: 375 kW (509.86 HP), first registration: 09/2018, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2018, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Volvo FH500 4x2 tractor unit, Euro 6, I-Shift transmission, VEB, Globetrotter XL cab with 2 bunk beds, 1 fuel tank, dual-circuit hydraulics, Power Take-Off (PTO), differential lock, Lane Guard lane departure warning system, collision warning, I-Park Cool, stationary air conditioning, auxiliary heater, automatic climate control, heated seats, refrigerator compartment, 1 tank approx. 600 L, roof hatch, radio/CD/AUX, electric windows. 2 units available. Bsdszbpr Repfx Ahmsln

Condition: ready for operation (used), Year of construction: 2024, workpiece length (max.): 750 mm, workpiece width (max.): 530 mm, workpiece height (max.): 6 mm, The machine has already been dismantled by a specialist company and placed in storage. TECHNICAL DETAILS Punching width max.: 530 mm Punching length max.: 750 mm Material thickness max.: 6 mm Bodpfxszb Iihj Ahmsln EQUIPMENT PC workstation DZDV-PC-TOUCHSCREEN PC 32" 9970460-20 incl. console Hot foil stamping/embossing system SLEEKING System HAK 100/Brother Note: Accessories are sold as is, without warranty. The principle applies: "Item purchased as seen." The prospective buyer must verify the completeness of the item on site.

Condition: used, functionality: unexamined, Extensive collection of a modular Emerson PACSystems RSTi-EP industrial controller. Standalone CPU with decentralized peripherals via ProfiNet. Offered as a complete package: controller, 2 network adapters, numerous digital and analog I/O modules. Suitable for building a complete control node or for expanding or providing spare parts for existing systems. Components: - 1x EPSCPE100 controller (CPU); 2x STXPNS001 ProfiNet slave adapter - 14x ST-1218 (digital input 8x24 V DC); 6x ST-2328 (digital output 8x24 V DC) - 10x ST-3218 (analog input 8x 4-20 mA); 7x ST-4214 (analog output 4x 4-20 mA) - Total of 40 modules: 112 DI, 48 DO, 80 AI, 28 AO - From an industrial environment, sold as is, no warranty/guarantee of functionality; only sold as a complete set, not individually. Bedpfxjzmaq Hj Ahmjln More equipment and devices are continuously being offered for sale from a laboratory and pilot plant liquidation – inquiries are welcome. Sold on behalf of a customer through the Köck auction house. Located in Eastern Austria, exact address available upon request. Pick-up by the buyer.

Condition: good (used), Year of construction: 2008, workpiece weight (max.): 5,000 kg, total width: 2,000 mm, total length: 3,500 mm, total height: 1,800 mm, Railway machine Hofmann - I-110K B11-VIS MACH-ID 9626 Make: Hofmann Type: I-110K B11-VIS Control: CEMB B11 Year: 2008 Balancing machine for wheel sets Work load up to 5000 Kg Kell B11 Vision CEMB controller Rail track gauge: 500-1435mm Max. wheel tread Ø: 1500mm Min. wheel tread Ø: 200mm Max. axle length wheel set:26450mm Min. axle length wheel set:500mm Speeds / ranges: 2100Rpm Number of slides: 2 Length: 3500mm Width: 2000mm Height: 1800mm Weight: 3500kg Bedpfx Aoy Uvgcshmoln Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, PNOZ m EF 8DI4DO Bljdpfxszgf Abo Ahmjn 772142 PILZ Partially unpacked for photography – unused item from stock clearance.

Condition: used, functionality: fully functional, mileage: 506,392 km, power: 338 kW (459.55 HP), first registration: 03/2023, fuel type: diesel, overall weight: 8,461 kg, axle configuration: 4x2, wheelbase: 380 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 12,777 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Predictive Cruise Control: I-See. Map based topography information. Cab: Globetrotter XL Cab, extra high sleeper. 2 x 210 Ah - AGM Absorbent Glass-fibre material type. D13K460TC Turbo-compound diesel engine, 460hp, 2600Nm SCR and EGR. EURO 6. I-Shift Automated 12-speed - GCW 60 tonne. Standard transmission shift - I-Shift or Powertronic. Volvo Engine Brake - Retardation D13K-375kW/D16-500kW. Advanced Emergency Brake System AEBS Driver attention support Driver comfort Electrically controlled air conditioning with sun sensor. Comfortable, suspended driver seat with belt. Comfortable suspended Passenger seat with seatbelt mounted in seat. Height adjustable foldable top bunk 700 x 1900mm. Lower bunk 815mm wide in the centre. Cab parking heater - 1.8kW Air to air. 33 litre under bunk mounted fridge / freezer with dividers. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Forward collision warning with AEBS advanced emergency brake system. Front tyres - 315/70 R22.5. Rear tyres - 315/70 R22.5. Jost JSK 37 cast fixed or sliding fifth wheel. Wheelbase 3800 mm. 900 litre, left side fuel tank with steps. 65 litre AdBlue tank under/behind cab. 570 litre, right side fueltank. Speed limiter setting 90 km/h - 56mph. Technology Secondary colour information display. FMS gateway for Fleet Management System. Bodpfezf Nwysx Ahmeln Exterior LED Headlights. Automatic headlight switching between day running light and low beam. Front fog lights - white. Tyres Information Front left - 11 mm Front right - 11 mm Rear left inner - 14 mm Rear left outer - 15 mm Rear right inner - 12 mm Rear right outer - 15 mm

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: M22-0012, mandrel length: 1,800 mm, mandrel diameter: 1,500 mm, type of input current: AC, total width: 1,800 mm, roll diameter: 1,500 mm, overall weight: 3,000 kg, product width (max.): 1,800 mm, input voltage: 480 V, General Features The single-shaft slitter rewinder uses independent presses for accurate, safe rewinding. Unwinder A shaft-less unwinder allows floor-level reel loading and dual rotation directions. Pneumatic-mechanical chucks secure the reels. Rollers and Alignment Aluminum rollers enhance durability and lightness. An automatic web aligner centers the master reel using edge detection. Tension and Cutting Control AC motors, load cells, and diameter calculation control unwind tension. The shear-type cutting group features 14 circular blades with pneumatic supports and has a quick-change counter-blade shaft. Curved rollers and suction nozzles manage cut separation and scrap removal. Rewinding Presses and Holding Steel, molybdenum-coated presses ensure longevity. Motorized tips enable automatic reel positioning. Rewinding Control A steel pressure roller—pneumatically operated with a proportional valve—sets pressure. Rewinding torque is managed via operator panel controls. A pneumatic clamp and two AC motors balance tension. Discharge and Safety Systems Bjdpsy Ufgrefx Ahmoln A hydraulic shovel and pusher facilitate reel discharge. The area is secured by a safety barrier. Control and Automation System AC motors and vector drives (SIEMENS) with proprietary software handle diameter calculation and torque control. All functions are accessible via a touch terminal with PLC communication.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 3769, total width: 1,667 mm, roll diameter: 1,067 mm, overall weight: 1,360 kg, product width (max.): 1,067 mm, input voltage: 460 V, ROTARY SHEAR SLITTING STATION: The rotary shear slitting station is a modular design allowing detachment from the main frame. The powered 60mm (2.367 inch) diameter upper and lower knife shafts drive the male and female shear knife assemblies. The male and female shear knife assemblies may be positioned anywhere within the web area and are held in position by eccentric locking keys. The removable male shear knife shaft assembly is mounted to a rigid dovetail bar assembly. The dovetail bar assembly is adjustable axially for shear knife face contact pressure and rotationally for knife overlap. A two-position lock lever assembly is used to rotate the dovetail bar assembly 900to the open position for removal of knife shaft assembly or closed in the slitting position. Rotary shear drive speed is proportional to web speed or manually controlled by the operator. Blsdpjy Ufgxofx Ahmjn REWIND: The slit web is alternately rewound on the duplex air expanding rewind shafts. Flange mounted rewind shafts provide ease of change to other desired types or diameters. The outboard rewind support swings open for removal of finished rolls from the cantilevered rewind shafts.

Condition: used, mileage: 706,000 km, power: 368 kW (500.34 HP), first registration: 06/2020, fuel type: diesel, next inspection (TÜV): 05/2027, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, parking heater, FH500 I-Save Automatic transmission RETARDER Air conditioning I-Park Cool Refrigeration unit ACC (Adaptive Cruise Control) with distance keeping Lane Assist Tilting hydraulic system Bjdpfx Ahezmbqnsmjln 2 diesel tanks Good condition French registration

Condition: excellent (used), Year of construction: 2019, operating hours: 15,708 h, machine/vehicle number: 700167604, type of input current: three-phase, We offer this Bühler SORTEX A MultiVision I grain sorting machine in very good condition, manufactured in 2019. Manufacturer: Bühler Model: SORTEX A MultiVision I Year of manufacture: 2019 The Multi Vision high-resolution inspection system focuses on the slightest color variations as well as light and dark color defects. The patented PROsize technology sorts products and foreign materials that have the same color as the quality product, using size characteristics. The machine is equipped with near-infrared spectroscopy (NIR) technology for visual color analysis. This allows the sorter to detect defective pieces or foreign objects of any color, even black. It also enables the detection of color defects. Bledpfezbh Hmox Ahmon The machine is equipped with a new optical sorter, which achieves up to 50% higher rejection rates. SpectraVision was designed to provide maximum yield. Newly designed internal full-color cameras provide the best color resolution even for the smallest color defects, while new InGaAs cameras take the detection of foreign material (FM) to a new level. Innovative ejection algorithms significantly minimize false rejects, and new calibration and tracking algorithms improve machine consistency and reduce the number of false rejects. Default modes and programs for each product are pre-set and tested by SORTEX experts for optimal machine settings right out of the box. A simple user interface design and individual sensitivity control for each defect make it easy for the operator to maintain optimal machine performance. The machine's performance can be monitored from anywhere in the world, in accordance with Industry 4.0 standards. Machine setting changes are recorded and stored in the Bühler Insights system, and the SORTEX monitoring system enables real-time monitoring of sorting performance and emergency alerts.

Condition: used, functionality: fully functional, mileage: 288,013 km, power: 338 kW (459.55 HP), first registration: 08/2022, fuel type: diesel, overall weight: 8,510 kg, axle configuration: 4x2, wheelbase: 380 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2022, number of cylinders: 6, cubic capacity: 12,777 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Bedpfx Aezlcnrjhmsln Predictive Cruise Control: I-See. Map based topography information. Cab: Globetrotter XL Cab, extra high sleeper. 2 x 210 Ah - AGM Absorbent Glass-fibre material type. Battery conditioner. D13K460TC Turbo-compound diesel engine, 460hp, 2600Nm SCR and EGR. EURO 6. I-Shift Automated 12-speed - GCW 60 tonne. Standard transmission shift - I-Shift. Volvo Engine Brake - Retardation D13K-375kW/D16-500kW. Advanced Emergency Brake System AEBS Driver attention support Driver comfort Electrically controlled air conditioning with sun sensor. Comfortable, suspended driver seat with belt. Comfortable suspended Passenger seat with seatbelt mounted in seat. Height adjustable foldable top bunk 700 x 1900mm. Lower bunk 815mm wide in the centre. Cab parking heater - 1.8kW Air to air. 33 litre under bunk mounted fridge / freezer with dividers. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Forward collision warning with AEBS advanced emergency brake system. Front tyres - 315/70 R22.5. Rear tyres - 315/70 R22.5. Jost JSK 37 cast fixed or sliding fifth wheel. Wheelbase 3800 mm. 900 litre, left side fuel tank with steps. 65 litre AdBlue tank under/behind cab. 570 litre, right side fueltank. Speed limiter setting 90 km/h - 56mph. Technology Secondary colour information display. FMS gateway for Fleet Management System. Exterior LED Headlights. Automatic headlight switching between day running light and low beam. Front fog lights - white. Tyres Information Front left - 5 mm Front right - 5 mm Rear left inner - 5 mm Rear left outer - 5 mm Rear right inner - 5 mm Rear right outer - 5 mm