Used Clifton 505 D Spl App for sale (48,538)

Condition: refurbished (used), Year of construction: 2018, machine/vehicle number: 27994, 12-needle universal portal embroidery machine for single motif and border embroidery as well as tubular goods and cap embroidery, complete with full machine equipment for ready-to-use operation: Lodpfoyvuxmjx Aiijhg Control unit: T8 operating panel Thread trimmer: integrated Embroidery speed: max. 1,000 stitches per minute (standard); max. 1,000 stitches per minute (cap) Number of embroidery heads: 4 Number of needles: 12 Head spacing: 400 mm Embroidery area: 405 x 300 mm (tubular goods); 500 x 1,600 mm (border); 70 x 360 mm (cap) Embroidery depth: 500 mm Power supply: single-phase AC 230 V, 50 Hz Basic machine price includes: Thread trimming unit Light barrier Cross laser 4 x cap frame drive 1 x cap device 8 x cap frame windows 360 mm / 270° 1 x border frame 1 x standard mounting clips for border frame 1 x table top

Condition: new, maximum load weight: 29,860 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space volume: 30 m³, total width: 2,550 mm, total height: 3,850 mm, Year of construction: 2026, Equipment: ABS, D-TEC Slurry Tanker SV 2006 BASIC Specification: * Tank volume: 30m³, Ø2200 mm, wall thickness 3 mm, temperature range 0–60°C * Extended swivel arm Lsdpjyhi Huofx Aiijhg * Flush line 4" with 2 gravity discharge points of 2.5" each, one at the front and one in the middle of the tank * Flush line on the left side via tension cables over the hose trays * Automatic pump shut-off. Axle also equipped with anti-spray mudguard * Holder with 2 wheel chocks * Left and right (narrow and tall) hose racks, each 5m, made of galvanized steel (250 mm wide, 190 mm high) Pump: * Vogelsang pump, 6,000 L/min Axles: * 9-ton Valx axles, Ø430 mm disc brakes, ET120 * 1st axle as lift axle * 3rd axle as steering/lazy axle Brakes: * Wabco EBS braking system * TPMS – Wabco Tyre Pressure Monitoring System (compliant with R141) * No electronic air suspension Additional Options: * Third axle as self-steering axle Lift Axle: * Automatic lift function on the first axle, load-dependent activation, or by pressing the brake 3 times * Starting assistance: load transfer to the 2nd and 3rd axles up to 130% below 30 km/h Tyre Size: * 385/65 R22.5 Tyres: * Apollo Lighting: * 24-volt lighting system Lighting options: * Flashing side marker lights * Working lights left and right at the first axle * 2x LED working lights at the rear (1x left, 1x right, mounted on the hose racks) Paintwork: * Tank painted in RAL 7030 STONE GREY * Chassis painted in RAL 7016 ANTHRACITE GREY Miscellaneous: * Gravity discharge connection at the rear of the pump; connection with manual valve (6" ball valve) for tank emptying; venting tank made of stainless steel (V2A) * Docking funnel (8") on top at the rear. Pipe leads down to the bottom of the tank with a manual slide valve.

Condition: refurbished (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 28352, overall weight: 850 kg, Number of heads: 6 needles Colours: 12 Lhedpfoyvi I Aex Aiieg Embroidery area depth: 500 mm Embroidery area width: 400 mm Equipment includes light barrier, cross line laser on one head, 6x cap drive, 1x cap frame clamping aid, 12x cap frames (360 mm x 70 mm), 1x border frame, 1x standard fixing clips for border frame, 1x table top.

Condition: refurbished (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 89104, overall weight: 130 kg, Needles: 18 Embroidery speed: max. 1,200 stitches/min Maximum embroidery area: 310 x 460 mm 18-needle universal bridge embroidery machine for single motif and border embroidery as well as tubular goods and cap embroidery, fully equipped for immediate operation: Lhodpoyu St Dsfx Aiiog Control: T8-2 operating unit Thread trimmer: integrated Embroidery speed: max. 1,200 stitches/min (standard/free arm), max. 1,000 stitches/min (cap) Embroidery area (D x W): 310 x 460 mm (single motifs), 300 x 400 mm (tubular goods), 70 x 360 mm (caps) Depending on frame type and cap shape Electrical data: single-phase AC 230 V, 50 Hz Scope of delivery: - Software-based electronic T8 control - Thread trimming device - Light barrier - Crosshair laser - 1 x free-arm frame holder - 1 x border frame 460 x 310 mm - 1 x cap frame drive - 2 x cap frames 360 mm - 1 x clamping aid for cap frame

Condition: like new (used), Year of construction: 2019, operating hours: 200 h, functionality: fully functional, machine/vehicle number: N/A, Equipment: head guard, A robust capper for applying roll-on-pilfer-proof (ROPP) caps to bottles Capacity: 400-600 bottles per hour, depending on operator Benchtop operation 4 roller stainless steel capping head Heads can be changed on the machine to allow the application of different sizes of cap with the same machine Stainless steel frame and case Dual push-button safe operation Ljdpfx Aex E S Nusiiohg

Condition: used, Year of construction: 2006, color: white, overall weight: 16,000 kg, maximum load weight: 12,410 kg, empty load weight: 3,590 kg, loading space volume: 50 m³, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,800 mm, first registration: 06/2006, total length: 7,300 mm, driver cabin: day cab, emission class: none, Equipment: truck registration, Reference number for inquiries: 41050 Krone Swap Body / Container * Year of manufacture: 2006 * 7.45 m length * Fixed roof * Load securing certificate DIN EN 12642 Code XL * VDI 2700 EN 12195 * Roller shutter door * Textile design * Double coupling mounts * Telescopic landing legs * Rail- and crane-compatible * Other * Gross weight: 16,000 kg * Unladen weight: 3,590 kg * Payload: 12,410 kg * Permissible gross weight: 16,000 kg Lhsdpfx Aieyrxmfsijg * Internal dimensions: L = 7,300 mm; W = 2,480 mm; H = 2,800 mm * Internal volume: 51 m³ * Corner fitting dimensions E = 5,853 mm * Overhang dimensions: 799 mm * Drop-off height: 1,120 mm * Pallet spaces: 18 * Krone swap body, 7.45 m * Sidewalls with integrated folding tables * Signage is applied with adhesive film * Interior in good condition Disclaimer: Subject to change, prior sale, and errors excepted. More images and videos available on our website. Our extensive services include, for example: * Purchase / sale / rental of commercial vehicles * Quick and easy financing * Processing of all (export) documents * Ordering export / customs number plates * Vehicle preparation: new tarpaulins, graphics, paintwork, etc. * Professional loading / load securing * TÜV approvals, registration service * Transfer/transit of commercial vehicles Contact our trained staff for expert advice.

Condition: good (used), functionality: fully functional, roll diameter: 50 mm, total width: 8,900 mm, total length: 1,300 mm, input voltage: 24 V, axle spacing: 75 mm, working width: 660 mm, Features: Condition: Fully functional, with signs of use Ideal for fast material transport Professionally dismantled and packaged Pass-through Flap / Lowerable Gate / Flap Element Manufacturer: Interroll Condition: Good (Used) Model: Roller - with drive / Drive rollers / 24V technology Total width incl. feet: approx. 890 mm Conveying width: approx. 660 mm Total length: approx. 1300 mm Minimum height of top edge of roller: approx. 700 mm Axle spacing: approx. 75 mm Roller diameter: approx. 50 mm Stock: 9 units Price per unit Lhodpfx Aiorbmfteieg The conveyor system was operational until dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under heavy loads. Tailored solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for loading and unloading your goods! We are happy to provide you with an individual offer or advise you on design or assembly questions. Simply let us know your requirements and the local conditions. Benefit from our many years of experience and extensive network of professionals. We have successfully implemented projects for companies in various industries such as logistics, the pharmaceutical industry, trades, or the electronics sector. Together, we will find ways to optimize your processes and material flow cost-effectively and sustainably. We can also offer fully automated sorting systems or complementary components such as picking racks or containers.

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, Thickness planer PANHANS Type 425 510mm The machine is in very good optical and technical condition. It comes from an assembly company and has only seen minimal use; everything is in original condition, with no components repainted. The machine has only been cleaned. Fully functional in all respects. - Equipped with kickback safety device - The planer knives are very easy and precise to adjust. Setting gauges, which can be mounted onto the cutterblock, are included to ensure maximum precision. Ledpfjxdu Tqsx Aiishg - Chips are efficiently extracted thanks to the enclosed system. - Four-knife cutterblock for conventional strip planer knives. - The thickness table is mounted on two trapezoidal spindles, ensuring stability and torsion resistance - With protective hood, which can be lifted upward - Maximum planing width: 510mm; maximum planing height: 250mm - We provide personal delivery and demonstration throughout Germany for €220. This eliminates any risk at purchase. Delivery to other countries is also possible on request. - Quiet operation in compliance with DIN 45635 - Highly effective feed rollers; infeed and outfeed rollers are made of metal, with adjustable pressure on both rollers - There are two support rollers embedded in the table, which can be brought up when needed (particularly helpful when planing moist wood) - User manual included - Feed speed: 7 and 14 m/min, powered by a separate gear motor - 160mm extraction port - Thickness table elevates electrically, with fine adjustment via handwheel - Planing height is easily and precisely read from a mechanical counter - Achieves an extremely clean finish - 5.5 kW motor ensures virtually fatigue-free operation - The machine comes fitted with four sharpened knives - Extremely robust and durable design, top workmanship and highest quality - Ready for immediate use - 380V, 5.5kW - Speed: 5000 rpm - Year of manufacture: 1989 - Weight: approx. 800 kg - Certified GS tested version - Optimal, simple, quick, and safe operation - Heavy, solid, and durable construction—simply indestructible

Condition: like new (used), Year of construction: 1993, functionality: fully functional, Dowel and slot mortising machine GANNOMAT JUNIOR 320 LBM Very good condition, like new; the machine comes from a very small joinery and was used only very little. The machine is in its original state and has only been cleaned, with no touch-ups to the paint. You can mill slots and drill dowel holes on two levels without having to reclamp the workpiece. 380V, 1500W Speed: 2800 rpm Year of manufacture: 1993 With this machine, you can mill slots, for example for lock cases and similar applications, or make all types of frame dowel joints, at right angles, butt joints, or mitred joints. Ideal for producing dowel joints in timber frame construction, furniture, door, window, and staircase manufacturing, as well as similar applications. By drilling on two levels, using the stops and indexing rails, and due to the machine’s design, dowel joints can be produced in a very short time, which makes the machine highly efficient. The machine requires a compressed air connection of 6 bar (air consumption is very low). Right-hand rotation. Mills and drills very efficiently and cleanly. Supplied with 2 angle stops (one center stop and one side stop, which can be used on either side), plus a mitre stop. On the front of the machine table, there is a 2000mm long stop rail with 2 flip stops; the stop rail can be shortened or extended if required. Workpiece clamping is done with 2 pneumatic clamping cylinders. Height adjustment between drilling levels is also pneumatic; the pneumatic switch is located at the front of the machine, ensuring rapid adjustment of the index positions and drilling levels. Lhodpfeynv E Rsx Aiijg Equipped with a precision 12mm indexing rail, featuring a center index and 12 indices left and right. Can be quickly converted for slot milling; in this mode, the machine can be used without indexing, with 2 adjustable stops left and right, allowing for a maximum working width of 420mm. Maximum drilling hole height: 100mm Maximum drilling depth: 150mm with stop and scale Maximum workpiece height: 160mm Everything functions perfectly. The machine is personally delivered and demonstrated by us anywhere in Germany for €220.00, so you have no risk when purchasing. Delivery to Austria and the EU is also possible on request. The machine table is 870mm wide, 140mm deep at the sides, and 350mm deep in the center. Professional equipment, not DIY store scrap. Ready for immediate operation. With 2-jaw drill chucks up to 20mm. Very stable and durable construction. The precision guides with play-free ball bearing bushings are in excellent condition and move smoothly.

Condition: new, For sale: professional industrial pump LOWARA BG9/D. Lhsdpfx Aieyval Rjisg The pump is brand new, unused, and stored as warehouse stock. Sold with original packaging and manual. LOWARA (Xylem) is among the top companies in the industrial pump sector. Perfect for water installations, industry, agriculture, pressure systems, and as a water pump. Technical data: Manufacturer: LOWARA Model: BG9/D Power: 1.1 kW Output power: 0.9 kW Voltage: 3-phase 400V Frequency: 50 Hz Flow rate: 20-65 l/min Head: 28.6 - 41.1 m Max pressure: 8 bar Material: stainless steel (INOX) Connections: 1 1/4" / 1" Weight: approx. 14.7 kg Condition: New – warehouse stock Possible minor storage marks on the packaging.

Condition: like new (used), power: 46 kW (62.54 HP), rotational speed (max.): 18,000 rpm, SPL Motor Spindle HSK-A63 46 kW 18000 rpm Manufacturer: SPL Spindel und Präzisionslager GmbH Type: Motor spindle Tool holder: HSK-A63 Power: 46 kW Rated speed: at 9880 rpm Maximum speed: 18000 rpm Lubrication: Lifetime grease Bearings: Hybrid bearings Cooling: Water cooling Lhedpfoyr Aavsx Aiiog Coolant flow rate: 8 l/min Maximum pressure: 7 bar Protection class: IP65 Balancing quality: G1 Spindle head seal: Purge air Radial run-out accuracy: 2 µm Axial run-out accuracy: 2 µm Radial run-out accuracy at 250 mm distance: 12 µm Rotating parts mass moment of inertia: 0.0196 kgm² Front spindle diameter D1: 151 mm Bearing diameter D2: 174 mm Diameter LB: 164 mm Overall length L: 614 mm Material number: 90010004149

Condition: refurbished (used), Year of construction: 2008, rotational speed (max.): 18,000 rpm, WEISS / SPL Motor Spindle HSK-A63 175389A 18000 rpm Manufacturer: Weiss Spindeltechnologie GmbH / SPL Spindel und Präzisionslager GmbH Type: Motor spindle Spindle type: 175389A Tool interface: HSK-A63 SPL type: DR-WE-175-M-W-18-46 Serial number: 60201670 Year of manufacture: 2008 Maximum speed: 18000 rpm Motor: AC135/200/4 Protection rating: IP54 Cooling: Water cooling Coolant flow rate: 8 l/min Temperature sensor: KTY 84-130, PTC Diameter D1: 179.7 mm Diameter D2: 262 mm Diameter LB: 285 mm Total length L: 1026 mm Spare part number: 90010000013 Ljdpfjyrz Ryex Aiiehg

Condition: new, maximum load weight: 31,330 kg, overall weight: 36,000 kg, axle configuration: 3 axles, total width: 2,470 mm, total height: 1,280 mm, Year of construction: 2026, Equipment: ABS, FT-LS-S-ECO D-TEC FLEXITRAILER FT-LS-S * 3-axle multi-container chassis, suitable for 45 ft containers, length >16.5 m (2 wheelbases) * 40 ft (2 wheelbases), 30 ft, 2x 20 ft and 20 ft flush with the rear Ljdjyq Ufujpfx Aiishg * 9-ton Valx axles with disc brakes Ø 430 mm * Rims ET 120 * Automatic lift axle on the first axle, * Operable via a switch on the chassis, or by actuating the service brake three times * With traction support, load increase on the 2nd and 3rd axle up to 130% below 30 km/h * Lifting / lowering controlled by the EBS modulator * Tyre size 385/55 R22.5 * Fifth wheel height: 1100 mm * Branded tyres as per manufacturer’s choice, with tyre pressure monitoring system * Wheel chocks * Removable hot-dip galvanized container guides at the front * Upper side of the frame spray galvanized * Paintwork: 1 coat, 2K RAL 9005, matte * 15-pin connector * Flashing side marker lamps * Multichamber rear lights

Condition: new, maximum load weight: 31,330 kg, overall weight: 36,000 kg, axle configuration: 3 axles, total width: 2,470 mm, total height: 1,280 mm, Year of construction: 2026, Equipment: ABS, FT-LS-S-ECO D-TEC FLEXITRAILER FT-LS-S * 3-axle multi-container chassis, suitable for 45 ft containers (overall length >16.5m, 2 wheelbases) * Compatible with 40 ft (2 wheelbases), 30 ft, 2 x 20 ft, and 20 ft rear-flush containers * 9-ton Valx axles with Ø 430 mm disc brakes * ET 120 offset rims * Automatic lift axle on the first axle, operable via a switch on the chassis or by pressing the service brake three times * Start assist: Axle load distribution to the 2nd and 3rd axles up to 130% below 30 km/h * Lifting/lowering controlled by EBS modulator Lhjdpfx Aijyq Ufzjieg * Tire size: 385/55 R22.5 * Fifth wheel height: 1,100 mm * Branded tires as per manufacturer's choice, with tire pressure monitoring system * Wheel chocks * Removable hot-dip galvanized front container guides * Upper frame surface hot-dip zinc sprayed * Coating: 1-coat 2K RAL 9005, matt * 15-pin connector * Flashing side marker lights * Multi-compartment tail lights

Condition: new, maximum load weight: 31,330 kg, overall weight: 36,000 kg, axle configuration: 3 axles, total width: 2,470 mm, total height: 1,280 mm, Year of construction: 2026, Equipment: ABS, FT-LS-S-ECO D-TEC FLEXITRAILER FT-LS-S * 3-axle multi-container chassis, suitable for 45 ft containers, length >16.5 m (2 wheelbases) * 40 ft (2 wheelbases), 30 ft, 2x 20 ft and 20 ft flush with rear * 9-tonne Valx axles with disc brakes Ø 430 mm * Rims offset ET 120 * Automatic lift axle on the first axle * Operable via a switch on the chassis or by pressing the service brake three times * With traction aid, load on 2nd and 3rd axle up to 130% under 30 km/h * Raise/lower via EBS modulator control Ljdpoyq Ufnsfx Aiijhg * Tyre size 385/55 R22.5 * Fifth wheel height: 1100 mm * Branded tyres at manufacturer’s discretion, tyre pressure monitoring system * Wheel chocks * Removable hot-dip galvanized front container guides * Frame top edge hot-dip galvanized * Paint: 1 layer, 2K RAL 9005, matt * 15-pin connector * Flashing side marker lights * Multi-chamber tail lights

Condition: ready for operation (used), Year of construction: 2007, This TRUMPF TruBend V5050 press brake was manufactured in 2007. It features a press force of 500 kN and a bending length of 1275 mm. Equipped with a stable machine frame, electro-hydraulic upper drive, and a 2-axis backgauge system, it ensures precision and efficiency. Ideal for high-quality bending operations. Contact us for more information about this machine. Additional equipment • Stable machine frame as a welded construction in all-steel construction / Pressure beam with high bending strength / Spherical bearing of the pressure beam with pressure beam inclined position / Electro-hydraulic upper drive with 2-cylinder technology / Proportional valve technology and switchable double pump / Modern block hydraulics with control valves mounted on the cylinder / Electronic pressure compensator / Measuring system with centrally mounted glass scales and temperature compensation / Upper tool holder system "New Standard Clamping" manual, hardened, self-centering, for vertical tool changes / Lower tool holder with hydraulic clamping, hardened / Programmable lower tool displacement (pneumatic, 2 positions) / 2-axis backgauge system with rack and pinion drive for X and R axes, 2 stop fingers with secure front adjustment / Machine control: TRUMPF TASC 6000 / Control panel with LCD keypad, foot switch for emergency up, down, and emergency stop / Safety device: integrated side doors / Control cabinet cooling (air-to-air heat exchanger) / Oil cooler / Network-capable / Modern machine design / Installation, commissioning, and instruction / Hydraulic upper tool clamping / BendGuard / TruBend documentation Lsdjx D Hb Hepfx Aiiohg Machine Benefits Technical Machine Benefits • Press force: 500 kn • Bending length: 1275 mm / free column clearance: 1040 mm / installation height: 385 mm • The machine was serviced annually by trumpf. • Trumpf maintenance contract.

Condition: used, axle configuration: 3 axles, first registration: 06/2005, color: other, Year of construction: 2004, Empty weight: 5.300 kg Axle 1: left 10 mm right 10 mm Lodpfeym Aimsx Aiiehg Axle 2: left 8 mm right 8 mm Axle 3: left8 mm righ 8 mm We have the possibility to stack trailers!

Condition: new, Year of construction: 2026, color: grey, overall weight: 7,000 kg, maximum load weight: 6,100 kg, empty load weight: 900 kg, loading space volume: 4 m³, loading space width: 2,000 mm, loading space length: 4,000 mm, loading space height: 500 mm, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel body, lashing eyes Superstructure: City roll-off container with drive-over pendulum tailgate, approx. 4m³ roll-off container DIN 30722-3 “City” Lhsdpfeyq S Adox Aiisg Internal loading area dimensions: approx. 4000mm x 2000mm x 500mm - Capacity: approx. 4m³ - Rear external rollers - Subframe made of UNP 140 - External rollers greasable and replaceable - Lifting bracket Ø 35mm - Hook height 900mm - Base tray made of 3mm St 37.2 (S235JR) - 6 lashing eyes (2.5t each) in the floor - Side walls made of 3mm St 37.2 (S235JR) - Locking mechanism L4 - Frame spacing: 750mm - Drive-over rear pendulum tailgate with side safety central lock according to UVV - Perimeter tarpaulin and net hooks - Welded steps at the front according to UVV - Container internally primed once - Externally double primed and double coated in a single-color finish - Painted in RAL 7016 - UVV safety labels - Container tested and approved - According to DGUV Regulation 214-017 - Reflectors applied in accordance with §32 (1) StVO and DIN 67520 for marking containers in public spaces ACCESSORY DETAILS WITHOUT GUARANTEE. Subject to change, prior sale, and errors!

Year of construction: 2014, condition: good (used), Machine Type: Web Finishing Line Year of Manufacture: 2014 Working Width: 520 mm Location: Labelpressshop/Germany Machine Configuration Dispensing Unit • Feeding unit for self-adhesive materials Die Cutting Unit • Die cutting station equipped with 24 inch magnetic cylinder Slitting Unit Lhodpfxeyrq I Uj Aiisg • Slitting station for separating the continuous web into individual lanes Condition • Machine in fully functional condition • Currently still in production • Short-term availability possible • Documentation available Machine Highlights • Reliable web finishing system from the French manufacturer GIC • Suitable for processing self-adhesive label materials • Integrated die-cutting solution with magnetic cylinder • Slitting unit for flexible finishing possibilities • Solid industrial design and easy operation • Ideal addition to digital or flexographic label production lines

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 82632, overall weight: 90 kg, 12-needle universal gantry embroidery machine for single motif and border embroidery, as well as tubular fabric and cap embroidery, fully equipped for ready-to-use operation: Lsdpfx Ajyrqywoiiohg Control unit: T8-2 control panel Thread cutter: integrated Embroidery speed: max. 1,200 stitches/min (standard/free arm), max. 1,000 stitches/min (cap) Embroidery area (D x W): 310 x 460 mm (single motifs), 300 x 400 mm (tubular goods), 70 x 360 mm (caps), depending on frame type and cap form Power supply: single-phase AC 230 V, 50 Hz Scope of delivery: - Software-orientated electronic T8 control unit - Thread trimming device - Light barrier - Cross laser - 1 free-arm frame holder - 1 cap frame drive unit - 2 cap frames 360 mm incl. clamping aid - 1 border frame 460 x 310 mm

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 27611, overall weight: 505 kg, 24-needle universal portal embroidery machine for single motifs and border embroidery as well as tubular goods and cap embroidery. Delivered with complete machinery equipment, ready for operation. Application: Control unit: T8-2 operating panel Thread cutter: integrated Embroidery speed: max. 1,000 stitches/min. Number of embroidery heads: 1 Border frame: 700 x 700 mm max. Embroidery area single frame tubular goods: 405 x 395 mm Cap frame: 70 x 360 mm Embroidery area depth, border: 700 mm Power supply: Single-phase AC, 230 volts, 50 Hz. Basic machine price includes: Cross laser Light barrier Thread cutting device Lhodpfxoyrqrys Aiijg Cap device with 2 cap frames per head Clamping aid for cap frames Border clamping elements

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 27399, overall weight: 360 kg, 12-needle universal portal embroidery machine for single motif and border embroidery as well as tubular goods and cap embroidery, with complete machine equipment for ready-to-use operation: Control unit: T8-2 operating panel Thread trimmer: integrated Embroidery speed: max. 1,000 stitches per minute Cap mode: max. 1,000 stitches per minute Number of embroidery heads: 1 Border embroidery area: max. 500 x 500 mm Single frame tubular embroidery area: 405 x 395 mm Cap frame: 70 x 360 mm Lhsdjyrqnnopfx Aiisg Embroidery field depth: 500 mm Power supply: single-phase AC 230 V, 50 Hz Machine base price incl.: Cross laser Light barrier Thread trimming device Cap device with 2 cap frames per head, window 360 mm / 270° Mounting aid for cap frames Border frame with border stretching elements Tabletop

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 5,290 h, load capacity: 1,400 kg, lifting height: 3,160 mm, free lift: 1,350 mm, fuel type: electric, mast type: duplex, construction height: 2,060 mm, fork length: 1,200 mm, drive type: Elektro, Electric 3-wheel forklift ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Duplex Transmission: Automatic Condition: Refurbished without warranty Technical condition: Very good Lhsdpfx Aiowct Tcoisg Front tires type: Non-marking Front tires condition: 80 - 100% Rear tires type: Non-marking Rear tires condition: 80 - 100% Battery voltage: 48V Battery capacity: 625Ah Battery manufacturer: IBH Battery year: 2022 Battery condition: 80 - 100% Description: Price includes new safety inspection (UVV), with original STILL parts fitted, new paintwork (original STILL), overhauled and tested battery from 2022 with Kappa Test 85% (value EUR 1,950.00 net), roof window will be retrofitted, matching charger with plug included. We are happy to organize low-cost transport for you. Lease-purchase possible! Sideshift, 3rd valve, rear work lights, front work lights, roof cover, full free lift, CE certificate, Multiple levers.

Year of construction: 2022, condition: used, functionality: unexamined, machine/vehicle number: S352621, S352622, S352623, Deburring system consisting of: 3 robot cells, each equipped with a KUKA robot KR10 1440-2 and deburring spindles, 3 safety enclosures with loading doors (one per robot), 1 hydraulic unit for clamping systems, 3 hydraulic clamping systems. For further details on condition and technical specifications, please refer to the attached appraisal report. Ledpfx Aioyqycxoijhg

Condition: excellent (used), functionality: fully functional, mileage: 1,035,000 km, power: 426.59 kW (580.00 HP), first registration: 03/2019, fuel type: diesel, axle configuration: 4x2, fuel: diesel, brakes: intarder, color: blue, gearing type: automatic, emission class: euro6, suspension: air, Equipment: ABS, air conditioning, airbag, navigation system, onboard computer, parking heater, spoiler, MAN TGX 18.580 D 38 Full-Air - First registration: 03/2019 - Mileage: 1,035,000 km - Retarder: Intarder - ADR AT - Stationary air conditioning - Navigation system - LED headlights - Double fuel tank - Double bunk - Tyres: 50% CUSTOMIZED FINANCING OR LEASING SOLUTIONS AVAILABLE ON SITE. FROM 24 UP TO 96 MONTHLY INSTALLMENTS, EVEN WITH ZERO DOWN PAYMENT. OUR GROUP’S OTHER LOCATIONS: DOMENICO TRUCK SRL, NAPLES LOCATION DOMENICO ESPOSITO S.P.A., EBOLI (SA) LOCATION – OFFICIAL DEALER MERCEDES-BENZ, FUSO, FOTON TRUCK, PIAGGIO COMMERCIAL AND MAXUS CONTACTS: 0823 1686306 335 6713062 OPENING HOURS: MONDAY-FRIDAY 8:30-19:00 / SATURDAY 8:30-14:00 WE OFFER A WIDE SELECTION OF USED MULTIBRAND COMMERCIAL/INDUSTRIAL VEHICLES: Lhjdpfewgy H Rsx Aiieg Fiat – Hyundai – DAF – Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania - S-Way -S500-V8-650-580-730-S500-S 500-S500 – Stralis – MAN - Nissan V8 - Intarder - 770s - Limited Edition - 660 S Semi-trailer – Refrigerated semi-trailer – Tipper – Lamberet – Schmitz – Isuzu – Fixed platform – Crane – Tipper – 4 axle – 4 rear axle – Tway – T-Way – 540 – 460 HP – Xway – X-Way – Three-way tipper – V8 – Scania – Frost Edition – Curtainsider – Box – Tail-lift – Refrigerated cell – Insulated with fridge – Van Domenico Truck srl declines all liability for any discrepancies in technical specifications, optional equipment and features which may occasionally differ from those shown in the description. We invite you to verify the features of the specific vehicle.