Used Co-Extrusion System for sale (56,601)

Condition: new, Year of construction: 2025, Blast Container High Cube Basic with Sweeping Floor Shovel Hopper for approx. 4 pressure vessel fillings + extra blasting vessel filling, enabling extended blasting time without refilling. Type SC.20FHC.5800 Basic Standard Equipment, ready for operation (just add abrasive and connect power and compressed air): 1x Control cabinet with emergency stop, Siemens Logo controller 1x Pressure blasting vessel 1x Pressure regulator and water separator 1x Blasting hose DN 25 with 8mm blasting nozzle Nwedpfx Akow Ivk Teusg 1x Remote control with dead man's switch 1x Abrasive inlet box/hopper 1x Abrasive media sieve + collection container for coarse particles 1x Airwash separator for blast dust extraction (dust reduction during blasting) 1x Filter unit with pre-chamber separator 1x Suction wall with louvre-type impact separator 1x 4mm rubber wall lining with fabric insert 1x Tread plate floor 3/5 1x LED lighting 1x Emergency lighting, door-end switch, emergency stop 1x Breathing air filter 1x Blasting helmet 1x Blasting gloves 1x Coverall/suit Options: - Side Door Open: blast container can be fully opened from the side for easy forklift loading - Container widening - Container extension - Crane roof hatch - 500kg crane runway - C-profile rail for powder coating - Blasting trolley - Filter with big bag - HEPA secondary filter for hazardous dust, e.g. when blasting stainless steel - Stainless steel tread plate floor for stainless steel blasting - Aluminum tread plate floor and much more upon request!

Condition: new, Year of construction: 2025, functionality: fully functional, pressure: 6 bar, warranty duration: 60 months, inner dimension width: 5,000 mm, inner dimension length: 15,000 mm, inner dimension height: 5,000 mm, filter area: 352 m², volume flow: 22 m³/h, Equipment: documentation/manual, lighting, Blasting house *up to 5 years warranty* for all blasting media made of a steel construction/isopanels with filter system, air circulation system, blasting media preparation, pressure blasting pot 200l automatically refilling, blasting hose with dead man's control, breathing air system, LED lighting, wall cladding 70shore 4mm fabric rubber, sweep pit bucket elevator. Blast media recirculation via sweeping pit with bucket elevator can be upgraded to cross conveyor screw with dosing hood across the entire width as sweeping pit or complete flat conveyor floor. Workpiece transport can be retrofitted: blasting carriage with track bed, crane system, crane roof opening, etc. For glass bead blasting for stainless steel, can be upgraded with the correct magnetic drawer or electrically driven magnetic drum separator. When blasting with 2 different blasting media (ferritic and mineral), upgradeable with magnetic drum separator, final magnetization stage and second air separator for blasting media separation, cleaning. Safety equipment: Emergency lighting battery, emergency stop switch in the cabin and outside, viewing window to the blasting chamber, door/door limit switch, dead man's control, pressure vessel quick venting Nsdpfsu Hy Tpox Akuswg Warranty up to 5 years on various components. 50 years of experience and more than 3000 systems in blasting machine construction

Condition: new, Year of construction: 2026, Blasting trolley 5t battery-powered for blasting system - Load capacity: 5t - For rail installation - Battery drive - Remote control - Size: Length = 3000 mm, Width = 1000 mm - Surfaces for workpiece fixture mounts Nwsdpfeyyxidsx Akuog

Condition: new, Year of construction: 2026, Blast carriage 10t for blasting system with pneumatic drive. - Pneumatic drive for 10t load capacity Nwodeyyxfrspfx Akujg - Load capacity: 10 t - Dimensions: L=2000mm W=2000mm H=500mm - For rail system - With mounting surfaces for workpiece holders - Rotary table as an option

Condition: new, Year of construction: 2026, functionality: fully functional, Manual blasting carriage for blasting plant, 5t loading capacity - L = 3000mm W = 1500mm H = 500mm - Load capacity: 5t - Carriage with flanged wheels for rails in the blasting chamber - Upright profiles to allow blasting media to drain off - Tow eyes for forklift Nodeyyxa Nopfx Akuewg - Rotary table available as an option

Condition: used, Year of construction: 2016, Overview This tray former and case sealer packaging module was manufactured in 2016 by Denmark SOCO SYSTEM A/S. The system consists of an automatic tray former and a case sealer designed for fully automated carton handling in packaging lines. The tray former erects flat carton blanks into trays, which are transferred via conveyor to downstream processes, while the case sealer applies self-adhesive tape to close cartons after filling. Technical data  Capacity: 12 – 14 cycles/min (tray former) Application: Carton forming and sealing Configuration: Automatic tray former with pneumatic forming system and automatic case sealer with tape sealing Utilities: Voltage: 3 × 400 V Frequency: 50 / 60 Hz (tray former), 50 Hz (case sealer) Air consumption: approx. 31.3 Nl/cycle (tray former), approx. 0.6 Nl/cycle (case sealer) Air pressure: 0.6 – 1.0 MPa Rated current: 2 A (tray former), 3 A (case sealer) Scope of Delivery  Tray former | SOCO SYSTEM A/S | BE 2200 ATS R | 2016 | Automatic tray former with pneumatic forming system and HMI control Case sealer | SOCO SYSTEM A/S | T-402 | 2016 | Automatic tape case sealer with conveyor integration Nwjdpfxeyxxxvs Akujg

Condition: excellent (used), Year of construction: 1978, operating hours: 60,000 h, functionality: fully functional, This listing offers a Kim Ho Sheng Industrial Co Ltd rubber and plastic open mixing mill, model ROLL 16x42'' L, manufactured in 1978. The machine features two large metal rollers designed for mixing rubber and plastic materials. It is equipped with a substantial exhaust hood and duct system positioned above the rollers to provide ventilation during operation. Control handles are located on both sides of the machine, allowing for manual adjustments and operation. This mixing mill is suitable for industrial rubber and plastic processing applications where open mixing mills are required. Nodpoyqyb Ujfx Akuowg

Condition: good (used), Curved roller conveyor, curved track, curved roller conveyor, curved roller conveyor, curved roller conveyor, roller curve, curved conveyor with drive, roller track, roller curve conveyor, roller track, conveyor track, lightweight roller conveyor -Manufacturer: Soco System, non-driven roller curve conveyor, height-adjustable -Height: max. 710 mm -Rollers: Ø 48 x 15 mm -Number: 2x roller conveyor available -Price: per piece Nwedpsyw Hwkefx Akueg -Transport dimensions: 1470/600/H510 mm -Weight: 23 kg/pc.

Condition: refurbished (used), Year of construction: 2003, functionality: fully functional, The Lamina Gluer is a manual fed in-line folding, gluing and taping machine. In very good technical condition, after total renovation. The tool free set-up allows a quick change over even for short runs. Options for the machine include cold glue, back support unit, tape applicator etc. Machine in is at our premises, testing on-site is possible. Nodpfxeyzfkks Akuswg Max Sheet Size: Width: 2200 mm (87") Min Sheet Width: 70 mm (3") Electrics: 208 V, 3 phase, 60 cycle; or 400 V, 3 phase, neutral, 50/60 cycle; or Specified Air Requirements: 6 bar; 80 psi; 34 CFM, Approximately 50 L/min

Condition: excellent (used), mileage: 579,500 km, power: 184 kW (250.17 HP), first registration: 09/2015, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,500 mm, fuel: diesel, color: silver, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: other, Year of construction: 2015, Truck with hooklift container system MAN TGL 12.250 First registered: 11/09/2015 Mileage: 579,500 km, 11,207 operating hours 12-speed automatic transmission Emission class: 6 New hooklift container system Manufacturer: JIMECA Load capacity: 8,000 kg Hook-to-roller distance: 3.0 to 3.6 meters Material/toolbox: Dimensions: Height: 1.0 meter Width: 0.7 meter Depth: 2.2 meters Front tires: +/- 30% Rear tires: +/- 30% Front brake pads: 28–26% Rear brake pads: –28% Cevoman bv. Lenskensdijk 5 2200 Herentals Njdpoywk Aqefx Akujwg Belgium

Condition: new, functionality: fully functional, power: 90 kW (122.37 HP), Year of construction: 2026, Plastic squeeze dryers are a vital part of plastic film washing lines. Washed films retain up to 30% moisture normally after exiting the wash process. High humidity will be affecting the efficiency and production of the following extrusion pelletizing process. Having a plastic squeeze dryer is a must to dehydrate the washed film, increase the density of recycled film and fibre materials, increase the capcity of the following extrusion process and further refine the quality of final plastic pellets. Nwedswg Sd Uspfx Akujg Even the water-washed plastic film processed through a spin-dryer still contains over 10% moisture which would significantly reduce the productivity of the extruder and quality of pellets. The latest development for drying and recycling washed film are plastic film squeeze dryers which could reduce moisture to the minimum and the squeezed material only contains maximum 3%, and more usually 1%, residual moisture. Much cheaper to operate than hot air drying , and better result as the output materials are continuously agglomerated direct from washing lines with +40% fluids to dense free flowing agglomerate. In this form it is not necessary to have cutter compactor extruders, as the materials are so dry and dense they can be fed direct to extruders for pellet production.With over 30 years of producing recycling dryers and extruders GENIUS have sold more than 600 of these driers to the plastics recycling market. ..There are 4 models in the range with production between 250 kgs per hour up to 1200 kgs per hour.

Year of construction: 2026, condition: new, functionality: fully functional, Complete plastics recycling line for films and fibre materials from Taiwan leading Plastics Recycling Machinery manufacturer. GENIUS Machinery Co who have more than 30 years of recycling extruder production and experience. Extruder can be fed without size reduction or shredding.. Materials in baled, loose or reel form can be fed. Line can be supplied complete with Belt conveyor, Cutter compactor, Main extruder, Filtration system, (variety of types to suit requirements), Hot pellet die-face cutting device, Centrifugal pellet dryer, Vibrating screener, Storage silo for pellets. Additional ancillary equipment can be supplied . A two stage " Cascade" version is also available for heavily printed films, or very dirty films requiring double filtration. Alternative sizes from 100 kgs per hr up to 1200 kgs per hr can be offered. Full sales and support and training is available in UK and Europe for these extremely modern and economic machines. Nodpfx Akjwg R Rtsujwg

Condition: new, Year of construction: 2026, functionality: fully functional, power: 198 kW (269.20 HP), Plastic squeeze dryers / Agglomerators are a vital part of plastic film washing lines. Nodpfswg Sgcsx Akujwg Washed films retain up to 40% moisture normally after exiting the wash process. High humidity will be affecting the efficiency and production of the following extrusion pelletizing process. Having a plastic squeeze dryer/Agglomerator is a must to dehydrate the washed film and increase the density of recycled film and fibre material. This also will increase the capacity of the extrusion process and further refine the quality of final plastic pellets. Even the water-washed plastic film processed through a spin-dryer still contains over 10% moisture which would be uneconomic to agglomerate on a conventional batch agglomerator. By redusing the moisture so significantly the productivity of the extruder and quality of pellets is increased exponentially. The latest development for drying and simultaneously agglomerating washed film are plastic film squeeze dryers which could reduce moisture to the minimum and the resultant squeezed material only contains maximum 3%, and more usually 1%, residual moisture. Much cheaper to operate than hot air drying where materials are still in lightweight flake form, and better result as the output materials are continuously agglomerated direct from washing lines with +40% fluids on entry to the dryer, to output dense free flowing agglomerate. In this form it is not necessary to have cutter compactor extruders saving more energy, as the materials are so dry and dense they can be fed direct to extruders for pellet production. With over 30 years of producing recycling dryers and extruders GENIUS have sold more than 600 of these driers to the plastics recycling market. ..There are 4 models in the range with production between 250 kgs per hour up to 1200 kgs per hour.

Condition: good (used), Curved roller conveyor, curved track, curved roller conveyor, curved roller conveyor, curved roller conveyor, roller curve, curved conveyor with drive, roller track, roller curve conveyor, roller track, conveyor track Nwjdsywu Azepfx Akujg -Manufacturer: Soco System, roller curve conveyor with drive, height adjustable -Rollers: Ø 54-80 x 355 mm -Speed: 14 m/min -Drive: 2x 0.12 kW, see photo of nameplate -Transport dimensions: 1500/600/H840 mm -Weight: 64 kg

Condition: used, Leybold A700 Q deposition system (ebeam) Leybold A700 deposition system: Was used for deposition Titanium - Gold (ebeam) Ebeam deposition unit (Leybold) Vacuum pump Leybold D40-65B + Diffusion pump 2kW Proceschamber: Size: Width 680mm x Height 680mm x Depth 550mm Substrateholder diameter 650mm Incl. shielding Oring door Heaters Basepressure low 10-6mbar Electronics: Baseline cabinet (eneeds upgrade) Old PLC (for pump/vent) Gas cabinet/water: Nsdpfx Akjuhcnijuowg Various valves/flow reducers for gas and water Note: D&M Vacuumsystems can upgrade the system to new processes (E-beam or Sputter) incl. new electronics and software. EUR 37.500,-

Condition: used, UHV deposition system (ebeam sputter) UHV deposition system: Was used for deposition Titanium - Gold (ebeam) Ebeam deposition unit is removed Cryopump and prepump is removed Loadlock: for samples round 75mm Incl. sample heater 450l/s turbomolecular pump (Leybold) Proceschamber: Size: Width 680mm x Height 750mm x Depth 590mm Incl. shielding Double oring door (partially pumped) Heaters Basepressure low 10-7mbar, high 10-8mbar Electronics: Baseline cabinet (e-beam unit removed) Old PLC (for pump/vent) Gas cabinet/water: Various valves/flow reducers for gas and water Nwjdpfeuhcn Njx Akusg Note: D&M Vacuumsystems can upgrade the system to new processes (E-beam or Sputter) incl. new electronics and software. EUR 55.000,-

Condition: used, functionality: fully functional, Carton Erector BE-2200 Manufacturer: Soco-System Condition: used Model/Type: BE-2200 ATS Overall length: approx. 2960 mm Overall width: approx. 1700 mm Overall height: approx. 1340/1600 mm Carton size: min. 180 L x 130 W x 100 mm H Carton size: max. 440 L x 315 W x 450 mm H Internal article number: 2026032301 The conveyor system was in operation up until dismantling. Features: - Condition: fully functional, with signs of use - Ideal for rapid material handling - Professionally dismantled and packed Nwedpfeywkbtex Akujg - Pick-up address: Industriestraße 5 (47918 Tönisvorst) Thanks to the high-quality workmanship of the conveyor technology, your materials glide smoothly to their destination, even under heavy loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading your goods! We are happy to provide you with a customized offer or advise you on design or installation questions. Simply let us know your requirements and local conditions. Benefit from our many years of experience and our outstanding network of professionals. We have already successfully implemented projects for companies from a wide range of industries, such as logistics, the pharmaceutical industry, trades or the electronics sector. Together, we will find ways to optimize your processes and material flow cost-effectively and sustainably. We can also offer you fully automated sorting technology or supplementary components such as picking racks or containers.

Condition: excellent (used), Year of construction: 2015, operating hours: 20,331 h, functionality: fully functional, pressing force: 100 t, filling opening width: 970 mm, filling opening length: 1,800 mm, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 750 kg, overall weight: 33,000 kg, Good day, We hereby offer you, without obligation, a used, complete baling press line consisting of a baler manufactured by HSM, type VK 8818 R-FU, including conveyor technology and wire tying stations. The following technical data was taken from the manufacturer's operating manual and brochures, for which we cannot guarantee accuracy or completeness. Technical Data – Baler: Manufacturer: HSM GmbH + Co. KG, Germany Type: VK 8818 R-FU Year of manufacture: 2015 Operating hours: 20,331 hours (as of September 2025) Number of bales pressed: 29,020 bales (as of September 2025) Press force (main press): 1000 kN Specific pressing force: 120 N/cm² Shear edge ejector force: 121 kN Feed opening dimensions: 970 x 1,800 mm Theoretical cycle time (idle): 8.3 seconds Theoretical output capacity: 643 m³/hour Bale dimensions: 1,100 x 750 mm, length adjustable from 600 up to 2,000 mm Drive power: 2 x 45 kW, frequency-controlled Connected load: 110 kW Total current consumption: 213 A Fusing: 250 A slow-blow Tying: 5-fold horizontal, fully automatic Output at bulk density: 20 kg/m³: 12.86 t/hour 50 kg/m³: 32.15 t/hour Bale weights (approx. 1.2 m bale length): 650 up to 750 kg per bale, material-dependent Hydraulic oil tank volume: 2000 L HVI 46 PLC control system: Siemens S7-300 Control panel: Siemens TP 700 Baler dimensions (assembled): 12,130 x 4,800 x 3,270 mm (L x W x H) Space requirement (with conveyor): 35,000 x 8,480 x 7,745 mm (L x W x H) Baler weight: approx. 33 t (main press approx. 12 t, press channel with bale clamp approx. 10 t) Additional Optional Equipment Ordered: – Frequency-controlled main drive, 2 x 45 kW, with up to 40% energy savings compared to the standard 2 x 45 kW drive, with same performance – Manual activation/deactivation of the number of wire bindings to save tying wire on non-expansive material – Shear edge ejector with 121 kN pressing force – Sensor-based wire monitoring, with baler shut-off in case of wire breakage or wire end – Bale chute – Optical warning signal, mounted on the control cabinet Condition of the Baler: The complete baling system (baler and conveyor technology) is in good, ready-to-use condition. The unit has been cleaned weekly, lubricated, and maintained according to manufacturer specifications by the operator. Technical Data – Chain Belt Conveyor: Manufacturer: Stadler Anlagenbau GmbH Type: Chain Belt Conveyor KF 1800 Year of manufacture: 2015 Belt speed: 0.36 m/second Feeder belt length: 7,000 mm Inclined belt length: 14,500 mm Nodjyz Af Eepfx Akuswg Gooseneck length: 1,550 mm Incline: 30° Nominal width: 1,800 mm Usable width: 1,638 mm Overall conveyor height: 7,745 mm Pit dimensions for conveyor: 11,200 x 3,000 x 1,250 mm (L x W x H) Scope of Delivery: – HSM VK 8818 R-FU baler – Maintenance platform – Bale chute – Wire diverting stations – Wire spool trolleys (without wire spools) – Stadler KF 1800 chain belt conveyor – Transverse sliding belt conveyor – Pit cover from feed conveyor to pit – Second control cabinet to operate the baler from the conveyor – Machine documentation in English Delivery Time: The complete system has already been dismantled, placed into storage, and can be loaded at short notice following receipt of payment. We would be pleased if this or one of our other balers might be of interest to you. Your Service Team Mertens & Frowein GmbH

Condition: good (used), Year of construction: 1992, working width: 1,300 mm, Double-sided glue applicator / 2-roller glue applicator Manufacturer: AMOD / Bürkle Type CDL 1300 Suitable for double-sided glue application Nodpfx Aov Sa Utjkuewg Working width 1300 mm With 2 new galvanized dosing bars Operating voltage 380 V 2-phase 50 Hz Control voltage 220 V Rated current 1 A Fuse protection 16 A (provided by customer) Including 2 additional glue rollers / good visual condition The machine will be technically inspected and cleaned upon order.

Condition: excellent (used), RENISHAW System 3R-656.31-3 Macro probe with 3 mm stylus ball. Used. Fully functional. Nodpfx Akeyk T Hdsuewg

Condition: excellent (used), RENISHAW System 3R-656.31-5 Macro probe with 5 mm stylus ball. Used. Fully functional. Nwodpfxeyk T Etj Akuog

Condition: excellent (used), 3 pieces Collet chuck adapter, 20 mm shank, equivalent to 3R-653 Mini holder chuck adapter 3R-653 for 20 mm shanks Incl. drawbar Equivalent to: Manual chuck adapter, Macro-Mini, 3R-653 Incl. 3 pieces drawbar 3R-605.1E Unit price: €200 Njdew E Hicspfx Akujwg

Condition: excellent (used), System 3R -772 DYNAFIX pallet Nedpoyk T Rcofx Akuowg Used Fully functional

Condition: new, Opportunity: Glass modules from Swiss liquidation, 96 glass modules Nwodpfxeyxth Ss Akujg

Condition: good (used), Year of construction: 2021, Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor -Manufacturer: Soco, conveyor belt, transport belt, belt conveyor from packaging machine -Speed: 21 m/min Njdpfx Ajyvrnxjkuowg -Belt width: 380 mm -Conveyor length: 740 mm -Drive: 0.12 kW, see photo of nameplate -Transport dimensions: 780/640/H620 mm -Weight: 36 kg