Used Colchester Mastiff 1600 for sale (2,607)

Condition: used, Year of construction: 2019, operating hours: 1,600 h, Equipment: soot filter, Well-maintained short-tail mobile excavator Komatsu PW 98 MR-10 Technical data: * Engine: Komatsu SAA4D95LE-6 * Engine output: 48.5 kW * Transport length: 6,810 mm * Transport height: 3,100 mm * Overall width: 2,350 mm * Max. digging reach: 7,860 mm * Max. digging depth: 4,055 mm Features include: * Twin tires 8.25-20 with spacers (in good condition) * Common rail direct injection diesel with cooled EGR technology * Komatsu Diesel Oxidation Catalyst (KDOC), without DPF * 3 travel modes (Creep / Low / High) * Front axle with 6° oscillation, automatic and manual locking * Cruise control * Komtrax stage 4 * Heating and air conditioning * Adjustable driver's seat with seat belt * High-resolution LCD monitor * Offset boom with 1,650 mm dipper arm * Additional 2-way valve with hydraulic circuit switchable to hammer mode * Rear dozer blade (2,350 mm) with cylinder safety valve * Grab pipe Hsdpfx Aoy Ikbbehzefi * CE conformity * 4 additional work lights on cab roof * Rain protection for windscreen + wiper * Mechanical quick coupler MS08 + lifting hook * Radio * Rear hood with high-resolution reversing camera * Urban reverse warning system Other: * Includes ditch cleaning bucket and digging bucket * Next safety inspection (UVV) due: 10/2026 !!! NOTE: Sale only to businesses and for export !!!

Condition: used, first registration: 06/1993, Year of construction: 1992, Schäfer BTA 1600 Tank/Bitumen Trailer • Drum brakes • Leaf spring suspension • 2 x BPW axles • Permissible total weight: 18,000 kg • Unladen weight: 5,340 kg • Payload: 12,660 kg • Tire size: 365/80 R 22 • Tread depth: 14/14, 15/15 mm Hfsdpfxszb U H Tj Ahzsi • Tank volume: 16,000 liters - German trailer! - Inspection and MOT test on request and subject to an additional charge: new! Errors and prior sale excepted!

Condition: good (used), Year of construction: 2010, functionality: fully functional, total length: 5,600 mm, vertical wasching and drying machine workong direction : from right to left working height : 1600 mm open top number of brushes : 4 glass thikness : 3 - 12 mm Hfjdpfex Hv Drjx Ahzoi

Condition: used, Year of construction: 1980, x-travel:1600 mm y-travel:800 mm z-travel:630 mm spindle taper:SK 50 feed speeds:10-6000 mm/min rapid traverse:6 m/min turning speed range - stepless:20-2000 U/min max. table load:5000 kg dimensions of switch cabinet:1800 x 530 x 2000 mm total power requirement:18 kW Hfjdpecxxrnsfx Ahzsi weight of the machine ca.:11 t dimensions of the machine ca.:4,6 x 2,9 x 2,62 m with PHILIPS NC 6664 3-axis control with program memory, hydraulic tool clamping, coolant system, chip-conveyor, horizontal and vertical spindles (SK 50), separate electrical cabinet, NC-round table, emergency cut-off

Condition: excellent (used), PRIMULTINI Band Saw Line SIC 1600 – CFE - IFB 1. PRIMULTINI Band Saw SIC 1600 -Roll diameter 1600 mm -Roll width 245 mm -Motor 75 kW 2. PRIMULTINI Band Saw Carriage Type CFE -3 Clamping Blocks -Max. Log Diameter 1000 mm 3. PRIMULTINI Operator's Cabin Complete with Control System 4. Complete Conveyor System -Cross Feed Conveyor, 4-strand, Length approx. 12 m -Hydraulic Log Feeder Hfodpfx Ahev R Edqezoi -Movable Unloading Roller Conveyor with Pressure Rollers -Cross Reloading Conveyor -Conveyor Belt Under the Roller Conveyor for Slabs -Vibrating Table for Slabs -Roller Conveyor with Cross Unloading -Roller Conveyor with Cross Unloading The complete system was built in 1999

Condition: ready for operation (used), Year of construction: 2021, operating hours: 67 h, clamping force: 1,600 kN, screw diameter: 45 mm, overall weight: 5,900 kg, controller manufacturer: ARBURG, controller model: SEOLOGICA direct, This 3-axis Arburg Allrounder 520S 1600-400 was manufactured in 2021. It features a screw diameter range of 35-45 mm and a clamping force up to 1600 kN. The machine includes a removal robot and an enclosure with a FilterFanUnit, ensuring clean operations. Ideal for precision plastic processing, it offers a mold clamping height of 250 mm and platen spacing of 825 mm. Contact us for more information about this machine. Additional equipment • Cooling water connection: Max. temperature: 30 °C, Min. Δp: 1.5 bar | DN 25 Machine Benefits Technical Machine Benefits • Thermoplastic cylinder: 45 mm, high wear resistant • CrN coating (screw and non-return valve) • Standard screw coupling, square geometry • Open nozzle 45 mm • Larger holding pressure pump • Selogica direct control system • Technology level 2, servo-controlled with 2 control pumps • Ejector pressure P/Q controlled • Continuous oil cooling and filtration • Nozzle contact force controlled, programmable (1st injection unit) • Clamping plate set, central 125 mm Hsdpfx Ahjx D E Dyjzjfi • Machine raised by 100 mm (increased vibration elements) • 8 programmable digital inputs/outputs • 6 electric mould heating control circuits • 1 additional heating control circuit (nozzle or adapter) • 4 manually adjustable cooling circuits • Controlled machine cooling circuits • aXw Control ScrewPilot (1st injection unit) • Water-cooled control cabinet • Reinforced screw coupling with multi-spline geometry • Injection speed with ramp function (F90302 = 1) • Automatic heater standby switching • Sound pressure level: 70 db(a) | ± 3 Extra Information • Screw Diameter: 45 mm • Injection Pressure (Max.): 1580 bar • Shot Weight (Max. g PS): 232 g • Heating Output 9.7 kW | 5 zones • Net Machine Weight: 5900 kg

Condition: ready for operation (used), Year of construction: 2010, overall weight: 250 kg, total height: 1,294 mm, number of axes: 6, This 6-axis ABB IRB 1600 robot arm was manufactured in 2010. It features versatile mounting options including floor, wall, and inverted setups, and is compatible with IRC5 and OmniCore controllers. With a maximum arm load of 30.5 kg and a reach of up to 1.45 m, it's ideal for a variety of applications. Consider the opportunity to buy this ABB IRB 1600 robot arm. Contact us for more information about this machine. • Type: 6-axis industrial robot (supports up to 3 external axes via MultiMove; max 36 axes) • Maximum payload: 30.5 kg (with 1.2 m reach) / 20.5 kg (with 1.45 m reach) • Protection class: IP54 standard; IP67 optional (Foundry Plus) • Mounting options: floor, wall, shelf, tilted, inverted • Controller compatibility: IRC5 (Single, Dual, Compact), OmniCore (C30, C90XT, V250XT, V400XT) • Axis ranges: • Axis 1: ±180° • Axis 2: +136° / –63° (1.2 m) or +150° / –90° (1.45 m) • Axis 3: +55° / –235° (1.2 m) or +65° / –245° (1.45 m) • Axis 4: ±200° (default), max ±190° revolution • Axis 5: ±115° • Axis 6: ±400° (default), max ±288° revolution • Repeatability: • Position repeatability (RP): 0.02 mm (6 kg) / 0.02–0.05 mm (10 kg) Hsdpfjx D E Tnox Ahzefi • Path repeatability (RT): 0.06–0.19 mm • Maximum joint speeds: • Axis 1: 150–180°/s • Axis 2: 160–180°/s • Axis 3: 170–185°/s • Axis 4: 320–385°/s • Axis 5: 400°/s • Axis 6: 460°/s • Wrist torque: Axis 4 & 5 ≈ 8.58 Nm; Axis 6 ≈ 4.91 Nm • Electrical: 200–600 V, 50/60 Hz; max power consumption 0.58 kW • Dimensions: Base 484 × 648 mm • Height: 1069 mm (1.2 m reach version) / 1294 mm (1.45 m reach version) • Operating temperature: +5 °C to +45 °C

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: Pal 1600, power: 180 kW (244.73 HP), input voltage: 380 V, warranty duration: 12 months, Equipment: documentation/manual, 1 pellet press brand: Paladin 1600-210 inner diameter die 850 mm tread die 210 mm Press is equipped with 2 motors each 90 KW n=1500. Press door is made of stainless steel with overload valve in door. 3 Roll press with 3 rolls on the press overhauled in a drilled or racked version Press is complete with mold lifting device and tools The press is completely overhauled and equipped with new bearings and wear parts such as front and rear sliders die washer etc. Also new V-belts and toothed belt. Hodpfxjq U R N Te Ahzsfi Also, all safeties will be observed and appropriate switches on Friction safety , door switch and inspection hatches will be fitted. Refurbished pump unit for friction and V-belt tensioning Remark: Conditioner on the press is optional

Condition: excellent (used), For sale: Julabo FC1600 laboratory chiller with a circulating pump (closed-loop system). Included is a copper spiral immersion probe (ideal for cooling tanks, fermentation, distillation, etc.). The equipment is in working order, and its condition can be seen in the photos. Temperature range: -20..+80°C Stability: +/-0.2°C Cooling capacity: approx. 1.6 kW Hfedpjzb Ixcofx Ahzsi Heater power: 1.2 kW Pump flow rate: 20 l/min, 0.5 bar System volume: 8-11 l Power supply: 230V

Condition: good (used), functionality: fully functional, Year of construction: 1998, Strip width: 400 - 1600 mm Hfsdpfx Aozbg T Sjhzji Edge trimming width: 400 - 1580 mm Strip thickness: 0.4 - 3.00 mm Roller diameter: 220 mm Roller width: 1700 mm Manual adjustment stand Electric immersion depth adjustment Hydraulic clamping nuts with manual high-pressure pump

Condition: good (used), functionality: fully functional, Year of construction: 2002, controller model: Siemens Sinumerik 840D, laser type: CO₂ laser, laser power: 3,200 W, punching force: 22 t, Standard equipment: Machine - Working area 3050 x 1550 mm - Hi-Las high-pressure cutting - Laser cutting head with 5'' lens - Quick-change device for cutting head Hedpfeza Eyhex Ahzofi - Programmable cutting gas selection/pressure adjustment - Capacitive height control APC - Function: ContourLas - Slag cone detection - Compact dust extractor - Tank heater - Automatic tool changer with 19 stations (21 – clamping jaws) - 2 clamping jaws - Rotation of all tools - NC-controlled digital, maintenance-free three-phase drives - Automatic re-positioning - Tool length compensation - Rapid shutdown of the hydraulics - Automatic shutdown - Automatic indexing tables, each 500 x 500 mm - Sensors for both indexing tables - Punch slug extraction - Forming capability - Programmable punch tool lubrication - Programmable pressure foot - Adaptive stroke length control - Safety devices - RJ 45 network connection - 3.5'' floppy disk drive + Laser TLF 3200 + SortMaster Box incl. 4 containers + GripMaster, adjustable + Scissor lift table + Re-positioning cylinder + Rotoscanner + HZB SheetMaster + SortMaster Pallet + SheetMaster incl. C-frame + Modular suction plate + additional clamping jaws, total of 4 + Chip conveyor with tilting container + Bulging detection

Condition: good (used), functionality: fully functional, Year of construction: 2009, controller model: Siemens Sinumerik 840D, laser type: CO₂ laser, laser power: 3,200 W, punching force: 22 t, Standard equipment: Machine - Working area 3050 x 1550 mm - Hi-Las high-pressure cutting - Cutting head quick-change system - Programmable cutting gas selection/pressure adjustment - Capacitive height control APC - Function: ContourLas - Slag cone detection - Compact dust extraction system - Tank heating - Automatic tool changer with 19 stations (21 – clamping jaws) - 2 clamping jaws - Rotation of all tools - NC-controlled, digitally operated, maintenance-free three-phase drives - Automatic repositioning - Tool length compensation - Rapid shutdown of the hydraulics - Automatic shutdown - Automatic indexing slides, each 500 x 500 mm - Sensors for both indexing slides - Slug extraction - Forming capability - Programmable stamping tool lubrication - Programmable clamping device - Adaptive stroke length control - Safety devices - RJ 45 network connection Hedpfx Ahsza Eu Ejzjfi - 3.5'' floppy disk drive + 5'' cutting head + 9" cutting head + FocusLine + MultiTool function + Thread forming function + Signing/quick beading function + Deburring and rolling technology function + Softpunch function + Additional clamping jaw + Repositioning cylinder + Vibration-damped installation + Blow-out device for small parts + Chip conveyor with tilting container

Condition: good (used), Year of construction: 2008, functionality: fully functional, X working area max.: 3000 mm Y working area max.: 1500 mm Control system: Sinumerik 840D Standard equipment: - Sturdy C-frame - Coordinate guidance with integrated linear magazine, 25 positions for tools and clamping jaws - 4 clamping jaws - Automatic part slide 500 x 500 mm - Drives: Maintenance-free three-phase servo motors Punch head: - Hydraulic mono-tool holder - 360-degree rotation for all tools - Automatic tool length compensation - Tool spray lubrication - 2nd lubricant tank - Programmable wiper movement - Punch slug extraction - Programmable clamping device for re-clamping with pre-selectable clamping force - Bulge detection Control system: - 10.4-inch TFT display - Simple operation - Diagnostic function - Integrated 3.5-inch floppy disk drive - RJ45 network connection Safety: - CE marking - Multi-beam light barriers - Rapid shut-off of hydraulics + Multitool function Hjdpfx Ajza Elqjhzofi + MultiBend function + Thread forming function + Marking/fast beading function + Deburring and rolling technology + Individually opening clamping jaw + Re-clamping cylinder + Sensor for part slide + Vibration-damped installation + Automatic shut-off + Chip conveyor + MDE interface + ToolMaster 70

Condition: good (used), functionality: fully functional, Year of construction: 2011, controller model: Rexroth IndraMotion MTX, laser type: CO₂ laser, laser power: 4,000 W, punching force: 22 t, Equipment: CE marking, nozzle changer, safety light barrier, Standard Equipment: Machine - Work area 3050 x 1550 mm - Robust, easily accessible C-frame - Coordinate guidance for highly precise machining - Linear magazine with 21 tool positions and 4 clamping claws - Drives with maintenance-free three-phase motors - Repositioning device with programmable clamping system - Foot pedal for closing clamping claws - Ball tables - Two parts collection containers - Chip container - Initial oil fill - Transport and assembly device - ContourLine - FocusLine - NitroLine - FastLine - FlyLine - PlasmaLine Hfedpfx Ahoza A Hlszji - Additional Xp and Yp axes - Ejection cylinder for laser parts - Quick flap for laser parts 500 x 500 mm including sensor for part chute - Liftable laser cutting support - Slug detection TRUMPF Laser - Laser TruFlow 2700 with LensLine and optimized standby mode - High-frequency excitation - Cooling unit - Laser control system TASC - Enclosed beam guidance - Beam pipe ventilation with compressed air Cutting Head - Lens cutting head with 170 mm focal length - Universal cutting head quick-change device UTI with bus connection - ControlLine Programming - Extended workshop programming (TruTops via network access) Punching Station - Electro-hydraulic punching head - Rotating mono-tool holder - Tool length compensation - Programmable clamping system with manually adjustable clamping force - Stroke counter for punch - Spray lubrication for punch - Punch slug extraction - Deflection detection - Flap for punching parts 500 x 500 mm including sensor for part chute - Reaching the fill level in the punching console - Level monitoring for thread forming and tool lubrication Control System - TRUMPF control system based on Rexroth IndraMotion MTX - External control panel with 15" TFT touchscreen - Hard drive with 160 GB storage capacity - Integrated technology data - Teleservice via internet - Integrated e-shop - Programmable cutting gas pressure - Automatic shutdown - Production plan Data Transfer - Network connection RJ45 and USB interface Safety - CE marking - Dual light curtains - Monitoring system for gas pressure, temperature, coolant, among others - Quick stop - Protection against scattered radiation - Compact dust extraction system - TruFlow 4000 including LensLine - Automatic nozzle changer - MultiTool function - MultiShear function - MultiBend function - Thread forming function - Deburring and rolling technology - Active die - StripLine - Adaptive stroke calibration - Spray lubrication for die - 4 individually opening clamping claws - Repositioning cylinder - Vibration-damped mounting - Chip conveyor with tipping container - Brush tables with loading and unloading assistance - Blowing device for small parts Automation: SheetMaster - Suction frame 3000 x 1500 mm with 36 suction cups (y-axis = 400 mm) - Adjustable suction rails (v-axis = 120 mm) - Peeling suction - Vacuum sensor for each suction cup - Sheet thickness sensor for double sheet detection - Automatic clamping claw closing on machine - Central lubrication - Main-time parallel loading and unloading of SheetMaster - Unloading monitoring GripMaster special arrangement 4m: - Scrap grid tongs with sensor - Scissor lift table 400 mm

Condition: as good as new (ex-display), Year of construction: 2025, Studer S40 1000/1600 Grinding length: 1,000/1,600 mm Center height: 175 mm (optionally more) Workpiece weight: 120 kg Additional freely selectable options: - Completely new control cabinet with Siemens Sinumerik One or Fanuc 0iTF-Plus control - Quick setup via GSN user interface - B-axis freely positionable - Second external grinding wheel - Internal grinding unit - Center height adjustment - Dressing spindle for diamond dressing roll - Balancing and finishing sensor - Hydraulic clamping/releasing of the tailstock Hfjdpfxjfg S Uas Ahzei - Automatic Siemens door drive - 19" / 22" screen - Remote maintenance - Conversion to needle nozzles - Matching coolant/extraction system - Automation preparation - and much more We would also be happy to overhaul your existing machine! Schaudt / Studer / Kellenberger / Bahmüller / Voumard / Overbeck / Fortuna / Tacchella and others.

Condition: used, Year of construction: 1992, Four units of used Andritz Paladin pellet presses Hedpoyrng Ijfx Ahzsfi

Year of construction: 2007, condition: as good as new (ex-display), new Cuenod C 120/160 GX507 industrial gas burner is available for sale Performance control is smoothly two-step; modulated Used fuel gas G20 Max power 1600 kW Minimum power 230 kW The burner diameter is 227 mm Dungs mb-vef 407 b01 s30 combustion regulator Fan motor power 2.4kw Voltage: 230 / 400V 2kW 50HZ IP47 GAS pressure: min 20 mbar / max 360mbar weight 109 kg production year 2007 Gas burner CUENOD is developed by innovative technology with a stable gas-air mixture and a low level of emissions. • The specially designed head contains nitrogen oxides below 80 mg / kWh. Hfsdpfxjd Aqqzj Ahzoi • Very low noise level (closed ventilation system). • Ventilation with the RHP® system to optimize the combustion process. • Cubic design with transverse fan. • Shunt for measuring the ionisation current. • AGP® system that provides the perfect air-to-gas ratio, CO2 High during the work cycle and to precisely control the flow of excess air required for optimum operating condensing boilers with maximum efficiency. The net price of commercial customers of EU customers If you need more information. Here we are to help! Please contact us at the contact form or call us Your ad has been automatically translated. Translation errors are possible.

Condition: used, Year of construction: 2004, Manufacturer: Pyrazol year of manufacture: 2004 operating temperature +10- +50 C total diameter: 1500mm height: 21000mm connection: 4x 200mm flanged 2x 3.4 inch + cleaning opening Hedpfx Ahouf Rxdozofi weight: empty 500 kg

Condition: excellent (used), Year of construction: 2018, Doppstadt HS 1600 / 3-star screen Hodpfxjy Ugggs Ahzjfi - Year of manufacture: 2018 - 3 fractions - 0-20 mm - 20-120 mm - Oversize return to shredder - 2 x magnetic drums - Machine is operated via the shredder's hydraulics. Many spare parts included Very good condition

Condition: excellent (used), functionality: fully functional, fuel type: gasoline, color: blue, operation weight: 3,500 kg, lifting power: 1,600 kg/m, lifting height: 30,000 mm, tire condition: 80 %, Year of construction: 2012, operating hours: 2,500 h, We also offer crane rentals. AHK 30-1600 trailer crane, registered in Poland, UDT certificate valid until September 2026. • Maximum mast extension: 30 m • Outrigger spacing in standard setup: 6.25 x 5.90 m • Outrigger spacing with outriggers positioned on one side: 8.17 x 4.00 m • Total weight of the trailer with crane: approx. 3500 kg • Drive system controlled via a radio control system • Radio control with a display showing operating parameters • Mechanism for monitoring slack in the cable and a system for monitoring cable retraction • Option for remotely retracting the mast into the transport position Mast construction: • Made of durable steel and aluminum alloys • Integrated with the chassis • Equipped with a modern telescopic extension system Hjdsyugt Espfx Ahzofi Additional equipment: Rotating work platform with a lifting capacity of 250 kg, for 2 people Glass suction lifter

Condition: good (used), Year of construction: 2016, operating hours: 7,903 h, lifting height: 3,330 mm, fuel type: gas, mast type: duplex, power: 33 kW (44.87 HP), motor manufacturer: PSI, fork length: 1,200 mm, Empty weight: 2.290 kg Lifting capacity: 1.600 kg Number of valves: 3 CE mark: yes Number of owners: 1 Technical condition: good Visual appearance: good Fork carriage: Sideshifter Please contact Bas Sindorf for more information Hfedpjy T Rm Uefx Ahzei

Condition: good (used), Year of construction: 2016, operating hours: 6,759 h, lifting height: 3,330 mm, fuel type: gas, mast type: duplex, power: 33 kW (44.87 HP), motor manufacturer: PSI, fork length: 1,200 mm, Empty weight: 2.290 kg Lifting capacity: 1.600 kg Number of valves: 3 CE mark: yes Number of owners: 1 Hodpsy T Rk Tofx Ahzofi Technical condition: good Visual appearance: good Fork carriage: Sideshifter Please contact Bas Sindorf for more information

Condition: new, Year of construction: 2025, pressure 1000 t distance between columns 4250 mm stroke 400 mm Control SIEMENS S7-1500F Hfodpfxsym D E Ae Ahzsi table dimension - longitudinal 4000 mm table dimension - cross 1600 mm total power requirement 200 kW weight of the machine ca. 250 t dimensions of the machine ca. 7,5 x 4,8 x 7,4 m

Condition: excellent (used), Year of construction: 2008, Siemens Sinumerik 840 D, 5 axes controlled. Hjdpfxjza Egbe Ahzjfi Wheel diameter max 2000 mm 700 mm wheel width Machine weight 35,000 kg Space requirements approx. 6.9 x 8.4 x 3.7 m

Condition: new, Year of construction: 2026, functionality: fully functional, feed length X-axis: 1,300 mm, feed length Y-axis: 320 mm, feed length Z-axis: 450 mm, total height: 2,000 mm, total width: 2,100 mm, total length: 2,520 mm, table width: 360 mm, table length: 1,600 mm, type of input current: three-phase, table load: 500 kg, overall weight: 2,800 kg, input voltage: 400 V, warranty duration: 12 months, Equipment: documentation/manual, Vertical Milling Machine Vertical milling machines are characterized by the ability to move the entire spindle head along the column guideways. This machine is ideally suited for machining tools, fixtures, and engine components. Features Vibration-damping cast iron construction reducing vibrations and oscillations Protective guards compliant with current safety standards Automatic feed on all three axes Rapid feed on all three axes Digital display (DRO) Infinitely variable feed rate Hfsdpoyuculofx Ahzei Servo drives ensuring precise and safe operation Large worktable with high load capacity Hardened and ground gears significantly reducing noise Central lubrication system Functional control panel for intuitive operation Adjustable head angle allowing various machining positions Table guard available as optional equipment. Technical Specifications Parameter Specification Table size 1600 × 360 mm Maximum table load 500 kg Table swivel angle -45° / +45° X/Y/Z travel 1300 / 320 / 450 mm X-axis feed rate 30–750 mm/min Y-axis feed rate 20–500 mm/min Z-axis feed rate 15–375 mm/min Rapid feed X/Y/Z 1200 / 800 / 600 mm/min T-slots 3 / 18 / 80 mm Spindle taper Horizontal ISO50 / Vertical ISO50 Upper ram travel 550 mm Distance between vertical spindle and table 196–646 mm Distance between horizontal spindle and table 20–470 mm Vertical spindle speed (12) 60–1750 rpm Horizontal spindle speed (12) 60–1800 rpm Vertical spindle motor 4.0 kW Horizontal spindle motor 5.5 kW Feed motor power X/Y/Z 1.5 / 1.5 / 1.5 kW Servo drive 10 Nm Dimensions (L × W × H) 2520 × 2100 × 2000 mm Weight 2800 kg