Used Comac Strand-Pelletizing Cutting Length Adjust for sale (49,668)

Year of construction: 1970, condition: ready for operation (used), Equipment: wire pay-off reel, mechanical flywheel, two wire guide tracks, enclosed straightening and cutting section, mechanical cam, eccentric and lever controls, discharge chute for cut wires, pneumatic service unit and pneumatic lines, retrofitted control panel with digital display, emergency stop button and transparent safety cover. An on-site inspection is possible. Todpfx Aozqu Hqoklea

Year of construction: 2019, condition: used, The Lemorau MEBR+ is a digital finishing machine based on a modular concept, allowing modules to be added as needed to meet customer requirements. The MEBR+ operates in both full rotary and semi-rotary modes. The semi-rotary mode is suitable for short runs, while the full rotary mode is ideal for large runs at high speeds. Thanks to state-of-the-art servo technology, the registration tolerance remains consistent during acceleration and braking phases, as well as throughout the production process. The Lemorau MEBR+ is equipped with a servo-controlled compensation system that ensures excellent web tension control when the machine is running in semi-rotary mode. Standard equipment: - Maximum rotary speed 200 m/min (656 ft/min) – label stock - Maximum rotary speed 120 m/min (394 ft/min) – die-cutting for precise fit - Maximum semi-rotary speed 40 m/min (131 ft/min), depending on plate size – die-cutting for precise fit - Web width 250, 330, 400 mm (10, 13, 16 in) - Electronic counter (label/meter/roll counter as well as total meter and label counter) - Adjustable splicing table with pneumatic clamps Todpfozqnxtox Aklea - Electronic web guiding system with ultrasonic sensor for guiding opaque and transparent materials - Automatic web tension control via servo motors – constant and decreasing tension - Memory for 250 jobs for easy and quick job setup - 6 sets of round knives with lateral adjustment - 2 interchangeable pneumatic unwinders with a diameter of 25, 40 and 76 mm (1, 1.5, 3 in) - Detection of paper and liner tears - Rewinding on label entry/label exit - Remote support via internet connection - Automatic stop at the end of the master roll with programmable roll-end function - Semi-automatic rewinding - Foot pedal for step-by-step machine control - Multilingual touchscreen - Die-cutting repeats 203.20 – 431.80 mm (8 – 17 in) – rotary mode - Die-cutting repeats 41.30–371.00 mm (1.6–14.6 in) – semi-rotary mode - Maximum rewind diameter: 600 mm (23.7 in) with 1 shaft / 350 mm (13.8 in) with 2 shafts - Maximum unwind diameter: 700 mm (27.5 in) - CE conformity certificate Optional equipment: 1 Anti-static bar 1 “Clear-on-Clear” sensor 1 Corona treatment 1 Speed package (80 m/min in semi-rotary mode) 1 Turret unwinder 2 Flexo unit for spot coating with rotating register 1 Web cleaner QRC (Quick Remote Connection) 1 new die-cutting forme with repeat lengths of 41.30–371.00 mm (1.6–14.6 in) – semi-rotary mode approx. 700 die-cutting sheets

Condition: new, Cutting nozzles, Zinser Type: ZHD Propane Year of manufacture: NEW Cutting nozzle ZHD-P 235 3100 202 6-10 mm Cutting nozzle ZHD-P 235 3100 203 10-20 mm Cutting nozzle ZHD-P 235 3100 204 20-30 mm Cutting nozzle ZHD-P 235 3100 206 45-60 mm Cutting nozzle ZHD-P 235 3100 207 60-80 mm Cutting nozzle ZHD-P 235 3100 208 80-100 mm Cutting nozzle ZHD-P 235 3100 209 100-160 mm Cutting nozzle ZHD-P 235 3100 210 160-230 mm Cutting nozzle ZHD-P 235 3100 211 230-300 mm Heating nozzle ZHD-P 235 3090 212 3-100 mm Tsdpfxozq Akdo Aklsa Heating nozzle ZHD-P 235 3090 111 100-300 mm 31726

Condition: used, functionality: unexamined, If you need more details, feel free to write. Todpfx Akowp Dfcelja

Condition: used, PARPAS Type AU engraving tool grinding machine Manufacturer's No. 854/36 Year of manufacture 1971 Grinding wheel diameter 100 mm Grinding spindle speed approx. 3500 rpm Motor power approx. 0.55 kW Mains connection 380 volts, 50 Hz - Collet chuck (DECKEL system with S20x2) - Collet chuck Ø 15.0 mm - Diamond grinding wheel dresser for the face of the grinding wheel Space requirement L x W x H 700 x 350 x 450 mm Weight approx. 80 kg Tsdodzp T Topfx Aklea good condition

Condition: used, Baader 684 Cutting Machine The Baader 684 is a universal cutting machine designed to cut a wide range of elongated products in half, including meat, fish, vegetables, and fruit. The machine features an infeed conveyor that transports the product towards a circular blade, which precisely cuts the product in half. After cutting, the product is transferred onto a right-angle discharge conveyor for further processing. This sausage cutter is particularly well-suited for cutting sausages quickly and efficiently. Technical Specifications: - Production capacity: Up to 1,200 pieces/hour - Infeed opening (W × D × H): 600 × 165 × 165 mm Tedozn I S Ijpfx Aklsa - Blade diameter: 498 mm - Voltage: 400 V (3+N, 50 Hz) - Power: 1.5 kW - Machine dimensions (W × D × H): 1,950 × 2,300 × 2,000 mm

Condition: new, Year of construction: 2023, functionality: fully functional, Poland 1.5 Year of manufacture: 2023 1.6 Operating voltage: 400 V / 50 Hz 1.7 Saw chain: 14788 (190 cm) 3333 1.8 Guide rail: 11003322 (190 cm) 3004 1.9 Operating manual: 52270 (27) 2.0 Cutting data: Packages to be crosscut, max: 4200 W=1200 H=1200 mm min: 2500 mm Packages after crosscutting, max: 4 mm min: 700 mm Remaining cuts (waste), max: 300 mm Tedpsx Dmavefx Aklsa 2026-04-29, on behalf of P. Hörnchen Date of issue, Creator 1. Machine card

Condition: used, Year of construction: 2012, Used BOTTERO glass laminating cutting table, Type 535 AVLE-46, Year 2012. Tedpfozn I Atox Aklea

Condition: used, Year of construction: 2019, machine/vehicle number: A1221E0017, Machine number: 113, Laser TruDisc 4001 (FD27), serial number: L5211E0465, year of manufacture: 2019, separate cooling unit KLH L0/5TK or RL14/0TK, serial number: H00748 ff., year of manufacture: 2019 each, separate cooling unit for laser and machine, camfil MF8.5A2 separate extraction unit, serial number: 855038512, exchange table, approx. 1.7 x 3 m, light curtain system, control unit, recorded operating hours (November 2025) 37,215 h, laser on: 22,614 h. Tsdpjzqzc Eefx Aklsa

Condition: used, Precise angles and mitres from 0° to 46°, with digital display for angle indication Location: Nattheim Tjdewhzg Uspfx Aklsa

Condition: used, machine/vehicle number: 14022, Rotor diameter: 350 mm Rotor width: 620 mm Tedpfx Akjzp Slzelja Rotor blades: 3 rows Stator blades: 2 rows Inlet cross-section: approx. 620 x 450 mm Drive motor: 22 kW

Condition: used, machine/vehicle number: 12248, Rotor diameter: 300 mm Tedpeyr Tnwefx Akloa Rotor width: 600 mm 3-blade rotor 4 rows of stator blades Inlet cross-section approx. 300 x 600 mm Drive motor: 37 kW

Condition: used, machine/vehicle number: 11481, Rotor diameter: 300 mm Rotor width: 600 mm 3-blade rotor 4 rows of stator blades Tjdpfx Akeyr Tkxslja Inlet cross-section approx. 250 x 600 mm Drive motor 37 kW

Condition: new, Year of construction: 2026, Cutting height at 90°: 200 mm Cutting height at 45°: 140 mm Cutting width at 90°: 420 mm Cutting width at 45°: 295 mm Miter range, horizontal: 45° - 90° - 25° Miter range, vertical: 60° - 90° - 30° Tedpfeiy Ry Aox Aklea Saw blade diameter: 520 mm Rotational speed: 2800 rpm Motor power: 5 kW Motor brake: yes Dust extraction port: 100 mm Weight: 490 kg

Condition: used, Year of construction: 2003, cutting width 78 cm feeding depth 78 cm feeding high max. 12 cm weight 1300 kg Tjdpfxezgxb Ds Akloa Dimensions (LxWxH) 192 x 155 x 145 Just about 560.000 cuts.

Condition: used, Year of construction: 2014, cutting width (max.): 4,300 mm, air demand: 4.45 m³/h, cutting diameter: 75 mm, Biesse Sektor 450 K1 - 4.300 x 4.400mm Description SIZING CENTRE SEKTOR 450 - K1 / 4300 x 4400 Motor 7,5 kW Scoring unit motor 2,2 kW 1+3 tables Speed 1-120 m/min. Additional pneumatic gripper in position 570 mm Additional pneumatic gripper in position 1740 mm Automatic board measuring on Manual cuts and, with OSI Plus option, on Sequences programs Push button for remote control start cycle, complete with emergency stop button. Twin Pusher 1.2 system. QUICK OPTI software for optimization of cutting patterns. On-board version. OSI PLUS interface. Includes: Order management, navigation through tree, advanced simulation, sequence mode, Macro functions for sequences, grooving, function Editor, advanced statistics elaboration, panel and drops stock, technological parameter control system, management of unstrained cuts on the boards. 1 AC100161 Piano a velo d'aria 2050 x 620 mm con profilo arrotondato lato squadro 3 Rounded air cushion unloading table, size 2050 x 620 mm Tsdpfx Aeznw Tbjklea Transfer device for the second air cushion unloading table. (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: good (used), Year of construction: 2013, Used plasma cutting machine from Haco Type: Compact 3015 Table dimensions: 3000 x 1500 mm Hypertherm HPR 130 amp power source Includes spare parts Todpfxeznun No Aklsa

Condition: excellent (used), Year of construction: 2013, Perfecta 168TS BASA fully automated cutting system year 2013 consisting of Perfecta 168TS cutting machine BASA 7 automatic jogger with automatic paper feeder ZTS 2000 paper pile loader for the rear table of the cutting machine BA6 unloader Tsdpozqtpdofx Aklja very little use very good condition located in Germany testing possible

Condition: like new (used), Year of construction: 2023, operating hours: 200 h, functionality: fully functional, Complete pellet production line, consisting of: Tjdpfx Akjy Ayiweloa Wood chip feed hopper 8m³ Hammer mill 22 kW Chip bunker with 3 discharge openings Screw conveyor with dosing unit (binder) Walw pellet press Conveyor belt Pellet cooling bunker with packaging unit and fine particle screening

Condition: used, Hüllhorst double miter saw in good, used condition. The miter angle cannot be adjusted on this machine. Year of manufacture unknown. The double miter saw has been used reliably for many years in the production of moldings and is still connected to the power supply. The machine is being sold as part of the liquidation of our carpentry business. Todpfozpfk Rjx Akloa Collection price – delivery possible upon request. The sale is made excluding any warranty for defects. Liability for intent, gross negligence, and damages resulting from injury to life, limb, or health remains unaffected. Claims for defects that have been fraudulently concealed also remain unaffected. An inspection of the machine is possible by arrangement.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, We present a fully automated fiber laser cutting system with integrated storage, robotic handling, and high-speed precision performance, designed for industrial production environments. KIMLA POWERCUT LF1530 Fiber Laser Cutting System (Fully Automated Line) Model: KIMLA POWERCUT LF1530 Manufacturer: KIMLA Year of manufacture: 2020 Compliance: CE certified Control system: Full CNC digital control Technical Specifications Installation length 12,500 mm Installation width 7,200 mm Installation height 3,000 mm Nominal sheet size (X axis) 3000 mm Nominal sheet size (Y axis) 1500 mm Cutting area X axis 3050 mm Cutting area Y axis 1550 mm Cutting area Z axis 120 mm Max positioning speed (all axes) 230 m/min Max positioning speed (X/Y axes) 230 m/min Max positioning speed (Z axis) 70 m/min Acceleration (X/Y axes) 6G Repeatability 0.001 mm Positioning accuracy 0.002 mm Max workpiece weight 900 kg Laser source Fiber laser, 4000 W (IPG) Pulse frequency ±1–2500 Hz Total power consumption (excluding extraction & chiller) 30 kW Drive system Linear drives on all axes Optical linear encoders Yes Part measurement/scanning system RENISHAW or equivalent, inductive Automatic sheet loading/unloading & storage system Integrated, 12 positions, 2000 kg each Shuttle tables Yes, 3 Table exchange speed 1 m/s Tube cutting option Yes, on third pallet Dynamic motion control (trajectory optimization) Yes Robotic part handling system Yes, robotic arm with full integration Documentation English Todpey Nwtysfx Aklsa CE compliance Yes Control system Digital (CNC) Spare parts and tools Yes

Year of construction: 2003, condition: good (used), Cutting mill, side mill, granulator, shredder, plastic shredder, granulate mill, granulator, rotor mill, recycling technology Tedpfozn Iqkex Aklja -Manufacturer: Rapid, Granulator Hammer Mill Cutting Mill Mobile -Type: 1528 -Drive motor: 2.2 kW -Inlet cross-section: 280 x 180 mm -Outlet: 280 x 180 mm -Sieve: Hole size 6 mm -Quantity: 1 cutting mill available -Dimensions: 600/550/H1140 mm -Weight: 183 kg

Year of construction: 2007, condition: good (used), Cutting mill, side mill, granulator, shredder, plastic shredder, granulate mill, granulator, rotor mill, recycling technology Tjdpfx Akjzn H Syoloa -Manufacturer: Rapid, Granulator Hammer Mill Cutting Mill Mobile -Type: G15035-SOLO -Drive motor: 2.2 kW -Inlet cross-section: 300 x 245 mm -Outlet: 360 x 200 mm -Sieve: Hole size 5 mm -Quantity: 1 cutting mill available -Dimensions: 630/590/H1095 mm -Weight: 158 kg

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2012, operating hours: 2,314 h, DG Tech – Authorized BLM Group Inspection Center Todpezqzz Isfx Aklsa In partnership with BLM Group, we manage the evaluation, purchase, and refurbishment of machines, including laser source maintenance, ensuring high-quality standards. We handle logistics, disassembly, and transport directly, eliminating the risks associated with private sales. We provide dedicated software, technical training, and after-sales support. We also offer flexible operating lease solutions to optimize investment and productivity. Thanks to our experience in after-sales service and continuous technical training, we offer a comprehensive and reliable service. LTFIBER load 6500 – delicate tube kit – 6500 – laser YLS 2000 discharge 6500 – suction chiller – tube kit up to 6" diameter – open profile integration – welding search – optimization of material utilization and bar management without breakage – powder micro-doser.

Condition: excellent (used), Year of construction: 2006, operating hours: 25,030 h, Model QUATTRO 2kw Year 2006 remanufactured by Amada specialist 2021 Traverse Method X Axis Head Traverse Y Axis Head Traverse Axis Traverse Distance 1270 x 1270 x 300mm (Z Axis) Max. Sheet Size (including 1 reposition) 2540 x 1270mm Max. Guaranteed Material Thickness 9mm Mild Steel 9mm Stainless (Oxygen Cut) 4mm Stainless (Clean Cut) 4mm Aluminium (A5052) Tsdpeuk U I Uefx Aklja Max. Material Weight 210Kg Max. Feed Speed 80m/min(X & Y Axis) 60m/min (Z Axis) Positioning Repeatability /- 0.005mm Axis Drive (X, Y & Z) AC Servo Motor Workchute 1270 x 550mm Assist Gas 4 Ports, 6 Selections Auto-Change Electric Power Required (Includes Oscillator) 43KVA 400V /- 10% 50Hz Air Required Machine Only 6.0 Kgf/cm² 250 l/min Machine Length 3123mm Machine Height 2275mm Machine Weight 4.9 tonnes Standard Equipment Anti Scratch Roller System -Z-Axis Sensor NC Autofocus Oscillator Specification Model Fanuc C - 2000C RF Discharge Excited Fast Axial Flow 2000W CO2:He2:N2=5:40:55 /-2% each vol 1.75 /-0.25 Kgf/cm² (at regulator) 10 l/hour NC Specification Model: Fanuc FS - 160i-L 9" Colour LCD RS232C INTERFACE Air Cooled, Floor Mounted COMPLETE WITH CHILLER EXTRACTOR TRANSFORMER