Used Continental Solid Rubber Tires 2 Pieces for sale (87,225)

Condition: used, mileage: 182,000 km, power: 175 kW (237.93 HP), first registration: 12/2013, fuel type: diesel, overall weight: 10,500 kg, axle configuration: 2 axles, next inspection (TÜV): 01/2027, gearing type: mechanical, emission class: euro5, loading space length: 7,200 mm, loading space width: 2,400 mm, Year of construction: 2013, Equipment: air conditioning, compressor, parking heater, soot filter, Special equipment: Driver's side airbag, twin-line trailer brake, trailer coupling: central axle trailer G 250, trailer socket 12V / 13-pin, trailer socket 24V / 15-pin, work lights on rear wall of cab (top), reinforced battery, long-distance cockpit, double bunk bed, rear axle differential lock, aluminum air reservoir, air horn(s) on cab roof, electric windows, 100 A alternator, graphic info display with EcoMeter, urea tank (AdBlue): 35 liters, body version: high roof, comfort central locking system, fuel tank: 180 liters (plastic), heated single-chamber air dryer, configurable special module, upper bunk (one-piece), lower bunk (two-piece), cab seats: comfort sprung driver's seat, rear mudguards with spray protection, reinforced rear axle stabilizer (for extremely high loads), 12 Volt socket, 24V cab socket, crossbeam for interchangeable ball and jaw towing coupling, toll recording preparation, additional thermal insulation, heat-insulating glazing, auxiliary heater (air). Further features: EURO 5 emissions standard, axle configuration: 4x2, electrically adjustable and heated exterior mirrors, cab: L (long), 6-speed gearbox - type: G 85-6, urea tank (AdBlue): plastic, electric glass roof hatch, rear axle H 2, crown wheel 325, interior filter: pollen filter, body/chassis: chassis, model update Atego 2, engine 6.4 liters - 175 kW diesel (OM 906 LA), engine start/stop system, constant throttle engine brake, wheelbase 4,820 mm, disc brakes, SCR system (AdBlue technology), side underrun protection, cab seats: fixed single passenger seat, steel rims 6.75x17.5, Telligent braking system with ABS, fixed rear underrun protection, front underrun protection, immobilizer, permissible gross weight 10.50 t, payload 5,150 kg, retarder brake, engine brake, LED main headlights. Aluminum body by FVG: length 6,400 mm + 300 mm, width 2,500 mm, loading height 950 mm, winch 4 tons. Tjdpfoy Sc Unjx Ahmoc Payload: 5,150 kg Single-owner, accident-free vehicle. Rear tires as new. Vehicle regularly serviced. Subject to errors and prior sale.

Condition: used, Year of construction: 2002, grinding diameter 450 mm grinding length 1500 mm centre height 225 mm Control FAGOR EQUIPEMENT - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - T6: HF Fischer spindle MFV or MFZ 1224/1242/1260 - T7: HF Fischer spindle MFV or MFZ 1224/1242/1260 - Marposs tool measurement - active longitudinal positioning - Elaso GAP-control on T1 and T2 contactless integrated in the control surface - Elaso GAP internal grinding with fluid sensor for T6 and T7 - semi-automatic balancing by Elaso integrated in the control surface for T1/T2 - tailstock hydraulic with fine adjustment +/- 150 microns - dresser on workpiece spindle side table mounted - dresser on tailstock side table mounted - dresser on upper table - new service- and userfriendly housing SPECIAL EQUPEMENT: Workhead with direct drive - strongly recommended for non-circular grinding - workpiece weight flying max. 75kg - workpiece weight between centres 150kg - water-cooled B-axis with direct drive - center height 225 mm - extremely torsionally stiff - highly accurate positioning - resolution ° - water-cooled Hydrostatic ball screw - x-axis - wear-free, as there is no contact during operation - no loss of precision, even during long-term use at full load and maximum speed - no friction at low speeds - no friction force backlash when the direction of rotation changes - translates even the smallest rotational movements - no stick-slip effect even at low speeds - no fluctuations in frictional torque due to ball circulation - higher axial stiffness compared to ball screws - significant improvement in damping, resulting in better workpiece surface finish and tool life - no oscillations due to ball circulation - also suitable for high speeds and accelerations - cost-effective alternative to the linear motor with greater precision and significantly lower heat generation - significantly less power dissipation and, as a result, no problems with swarf on permanent magnets New hydraulic unit - optimized temperature control (chiller) - Energy-saving Only one pump controlled by VFD - Pressure monitoring - monitoring of the hydrostatic oil for water content. (Damage to the bellows is recognised and detected prematurely) -fine adjustment +/- 150 microns Paper belt filter 375l – alternative 480l Grinding mist extraction system – emulsion MECHANICAL OVERHAUL -complete machine according to Kellenberger protocoll -new painting ELECTRICAL OVERHAUL Tedpfx Ajuxfu Nehmec - new modern Fagor CNC with BEMA HMI - new electric cabinet - new digital drive technology - replacement of all electrical cables, switches etc. - new absolute external scales in x- and z-axis - new absolute encoder (B-axis) Grinding software BEMA-Standard: - workpiece zeroing - grinding wheel zeroing - dressing diamond measuring - corrections - external and internal surface grinding - external and internal angle grinding (turning of the b-axis, dressing with straight wheel) - external and internal radius grinding (radius dressed on wheel) - semi-automatic traverse grinding - workpiece zeroing - 2 dressing diamonds - 1 dressing blade - dressing roll - 3 flat dresser - corrections - Z-position measurement - GAP control Optional grinding cycles at no extra charge: Profile plunge grinding: - external and internal profile plunge grinding with profile wheel Pr...

Condition: used, Year of construction: 2000, MANZONI Transfer Press Type: T6302MR/2/12/TE, Year of manufacture: 2000 Pressing force: 6,300 kN Stroke rate: 10-45 1/min Stroke: 600 mm Ram adjustment: 200 mm Table area: 4,100 x 1,700 mm Ram area: 4,000 x 1,700 mm Installation height: 1,100 mm Control system: SIEMENS S7 Transfer distance: 0-800 mm Todpfx Asz Dxiaehmsc Opening/closing distance per slide: 150 mm Lifting stroke: 150 mm Distance between gripper slides in the closed position: 500-1000 mm PBK strip feeding system Strip thickness: 0.2 - 3.5 mm Strip width: 120 - 1,200 mm Coil capacity: 10,000 kg

Condition: used, maximum load weight: 32,000 kg, overall weight: 37,000 kg, axle configuration: 3 axles, first registration: 10/2006, total length: 10,310 mm, total width: 2,550 mm, total height: 3,850 mm, Equipment: ABS, 6 units available!!! * Trailing lift axle * Lift axle * BPW-ECO Plus axles with disc brakes * 40 m³ capacity ----* Tire size: 385/65R22.5 * Technically permissible total weight: 40,000 kg Tedpfxoz D Ruhe Ahmsc * Unladen weight: 5,000 kg * Overall length: 10,310 mm * Inspection due: / ----Vehicle number/Vehicle: 12500, 12501, 12502, 12503, 12505, 12508----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed.-----We will be happy to assist you with all formalities that arise when purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional fee:----Trade-in of your old vehicle TÜV/inspection Complete export processing Arrangement of financing Application for export license plates Vehicle transport Vehicle registration Recovery and vehicle transport---- ?YOUR VTS TEAM

Condition: used, 2-axis linear guide with linear motors - Slide arm pick and place with linear guides for automation Loading unit such as Scara robot, manipulator, handling device, handling system, placement gripper, loading gripper for automation Manufacturer SCHUNK - GEMOTEC - AFAG - LINMOT Type PS01-37x240-M + E1100-MT + T01-/72/420 + EPM 37-780 Year of construction approx. 2005 Horizontal axis with linear motor Gemotec type EPM 37-780 Actuator type: EPM 37x780-M Axis module: LinMot type E1100-MT-HC Horizontal movement: 780 mm Tjdeu H R Iwspfx Ahmec Nominal force horizontal: 160 N Horizontal speed: 2.1 m/s Horizontal acceleration: 12.4 m/s² Repeat accuracy: +/- 0.05 mm Horizontal load capacity: max. 7000 g Horizontal guide column: Ø 20 mm Vertical axis with LinMot linear motor type PS01-37x240-M Actuator type: LM01-23x80/160 Axis module: LinMot type E1100-MT Vertical movement 160 mm Nominal vertical force: 44 N Max force vertical: 203 N Vertical speed: 2.2 m/s Vertical acceleration: 50.4 m/s² Repeat accuracy: +/- 0.05 mm Horizontal guide column: Ø 20 mm Power supply unit LinMot type T01-/72/420 (for motor supply) Input voltage: 3 x 400 V AC 50/60 Hz Output voltage: 72 V DC 420 Watt Base frame Support columns: 4 pieces Ø 55 mm Support column height adjustment: 200 mm (manual height adjustment) Mounting foot: 2 x 175 x 90 mm Control voltage: 24 V DC - Can be moved in two axes - Mounting plate for tool holder 66 x 56 mm - Integrated path measurement - Axis modules with integrated positioning control - Festo pneumatic cylinder as holding brake on the vertical axis - Horizontal axis with 3 external fans - Axis modules configurable via LinMot MPC Configurator 3.2 software Space requirement L x W x H: 1120 x 720 x 740 mm Weight: approx. 65 kg Very good condition

Year of construction: 2018, condition: as good as new (ex-display), Grinding wheel Tjdpfx Ahsf Etr Romjc Manufacturer: Comet Type: 3760 1/2 10 C 320 H I 7 V Item number: 5120 Weight: 6.6 kg

Condition: as good as new (ex-display), Tachometer generator Tjdpfx Aof Tctdohmoc Manufacturer: Baumer Type: KTD 2 - 1.5 B 14 M: 11058736 C: 100534 413-002

Condition: used, Year of construction: 2010, Technical details: swing diameter: 260 mm control: 840 D SIEMENS turning speeds: 3.500 1/min spindle drive: 36 / 28 kW chucking diameter: 260 mm travel -x axis: 900 mm Tjdpfx Ahetpq Urjmjc travel -z axis: 400 mm turret head: 12 Pos. tool holder: VDI 40 rapid power traverse in X-and Z direction: 100 / 30 m/min dimensions of the machine ca.: 5,3 x 2,4 x 3,31 m CNC vertical lathe with 2 spindles, 2x RÖHM power chucks dia. 315mm, *

Condition: excellent (used), Wire electrode, stainless steel welding wire, welding wire -Large roll -Wire thickness: 1.2 mm -Wire electrode: high-alloy, chemically resistant Tsdpfjd Elvvox Ahmec -Number: 2x casters available -Price: per package -Weight: 12 kg

Condition: ready for operation (used), We offer this ready for use B.I.P. Engineering BIPEL 150 T Rubber Vulcanising Press. It is currently installed so can be seen running in situation. We have attached a data sheet which shows the key Dimensions. Type: 150 FAOL Serial Number: 8620 Tsdpfx Aoz D Igbohmec Voltage: 440 V Phase: 3 Frequency: 50 Hz Apparent power: 100 kVA Price in GBP = £16,000 If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2003, functionality: fully functional, HAAS VF 2 VERTICTAL MACHINING CENTRE TABLE 914 X 356 MM TRAVERSES - 762 X 406 X 508 MM Tsdpfx Ahez Ehxysmec MAX CUTTING RATE 16.5 M/MIN SPINDLE MOTOR 20 HP 20 ATC 40 TAPER SPINDLE SWARF CONVEYOR STANDARD COOLANT OVERALL DIMESIONS - 2790 X 2350 X 2650 MM WEIGHT 3.5 TON ORIGINAL PAINTWORK , VERY VERY GOOD FOR ITS AGE .

Condition: used, functionality: fully functional, total width: 1,009 mm, total length: 902 mm, total height: 678 mm, empty load weight: 165 kg, input voltage: 380 V, Range: Trégor Tradition Dough weight range: 50 to 1,450 g Capacity: up to 1,800 pieces/hour Baguette capacity: 1,500 pieces/hour Rollers: 1 pre-rolling + 2 rolling Pointed end shaping: Pointop system Settings: 2 selectors with 36-position pins Belts: woven wool on synthetic warp Belt thickness: 7 mm Sides: 12 mm food-grade aluminum Fold-down safety chute Removable scrapers with snap-off mechanism Removal of both belts: approx. 25 min Power: 0.55 kW Power supply: 380 V Frequency: 50/60 Hz Current: 1.75 A at 380 V Dimensions: 1009 x 902 x 678 mm Weight: 165 kg Used MERAND Trégor Tradition dough shaper – 50 to 1,450 g General description Tjdpfx Aez Ehwcehmsc This used MERAND Trégor Tradition dough shaper, from the previous Mécapâte generation, is designed for rolling, wrapping, and elongating dough in professional bakeries. Its vertical design allows for processing a documented range of 50 to 1,450 g, with a capacity of up to 1,800 pieces/hour depending on the weight and type of dough. The shaping process uses three rollers, including one Alvéo+ pre-rolling roller and two rolling rollers. The dough is then elongated between two belts moving in opposite directions. This configuration is particularly suitable for preparing baguettes, short loaves, half-baguettes, and various other bakery products as intended by the manufacturer. Why this Trégor Tradition stands out This version combines three characteristic features of the Trégor Tradition: PPR, the Alvéo+ roller, and the Pointop system. The Progressive and Adjustable Pre-rolling assists in adjusting the rolling process to gradually work the dough. The Alvéo+ roller, with its alveolar structure, is designed to limit degassing and better preserve the structure of fermented or hydrated doughs. The Pointop, for its part, enables the automatic shaping of breads and baguettes with pointed ends. Two selectors with 36-position pins allow for precise adjustment of the rolling and elongation, which is an advantage for achieving consistent settings between different products.

Condition: used, Year of construction: 1971, pressure 100 t distance between columns 400 mm Todjxuv Htspfx Ahmsc stroke 20 - 140 mm table surface area 900 x 710 mm ram surface 560 x 450 mm ram adjustment 80 mm dayligth 470 mm no. of strokes 70 Hub/min total power requirement 10,5 kW weight of the machine ca. 9 t dimensions of machine L x W x H 1,98 x 1,60 x 3,10 m

Condition: used, Year of construction: 2009, x-travel 2.360/2x 930 mm y-travel 600 mm z-travel 600 mm table surface area 2.750 x 600 mm Control Siemens 840 D spindle tunring speed 30 - 6.000 U/min tool taper SK 50 number of tool places 26 Pos. Number of working hours ca. 50.884 h connected load 69 KVA Tsdpoz Ek D Sefx Ahmec weight of the machine ca. 20 t In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Handwheel, Heidenhain HR 410 - Chip conveyor - External belt filtration system Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data and specifications, and prior sale.

Condition: good (used), Year of construction: 1985, Radial fan, radial blower, radial fan, chip extraction blower, fan, extraction, chip blower, high-performance fan -Manufacturer: Rippert, Radial fan, extraction blower, fan type T8-355/2-A -Volume flow: 7100 m³/h -Total pressure: 4300 Pa -Motor: VEM 18.5 kW 2920 rpm / Schorch 18.5 kW 2935 rpm -Inlet connection: Ø 300 mm -Output connection: 305 x 305 mm / 300 x 300 mm -Fan wheel: Ø600 x 140 mm -Number: 3x extraction fans available -Price: per piece -Overall dimensions: 1760/1030/H1110 mm Tsdoz Eg Erjpfx Ahmoc -Weight: 442 kg/unit

Condition: good (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 3/4782, cutting length (max.): 3,500 mm, input current: 8 A, input voltage: 400 V, input frequency: 50 Hz, pneumatic connection: 6 bar, For sale is a well-maintained Langzauner LZ 2/2-3500 veneer saw, manufactured in Austria. The machine is in very good and well-maintained used condition and generally gives a very solid impression. The robust design of Langzauner machines makes this model particularly interesting for professional use in carpentry shops and wood processing companies. Technical data: Manufacturer: Langzauner Maschinenfabrik, Lambrechten/Upper Austria, Austria Type: LZ 2/2-3500 Factory number: 3/4782 Tsdez Ep I Njpfx Ahmjc Cutting length: 3,500 mm Cutting height: approx. 45 mm Main motor: 3.3 kW Connection: 3 x 400 V / 50 Hz Rated current: 7.5 A Jointing/planing unit: included CE marking: included The LZ 2/2-3500 is a robust industrial veneer saw for the precise cutting of veneers and sheet materials. The included jointing unit also enables the processing or jointing of the edges. The machine can be inspected and tested on-site while powered. An inspection and functional demonstration are possible after prior arrangement.

Condition: used, Year of construction: 2020, operating hours: 2,563 h, power: 192 kW (261.05 HP), Equipment: air conditioning, all wheel drive, cabin, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle on a non-binding basis, subject to finalization, errors, typographical errors, and prior sale: Fendt Rogator 655D sprayer Registration date: May 20, 2021 Production unit: .563 Pump hours: 1,500, sprayer hours: 695 Transmission: 40 km/h 2 rotating beacons 8 headlights at the top front, 6 headlights at the bottom front Work lights at the top rear Full cab with air conditioning, Category 4 Joystick control 2 monitors / Varioterminal 10.4" 2 camera systems Air conditioning Radio, Bluetooth, USB port, hands-free phone system 2nd seat Refrigerator and warming cabinet 3" suction hose 3" high-performance pump system Stainless steel centrifugal pump 785 L/min 5-way valve, stainless steel, electric 1 Agromie basic package Contour Assist 2 water connections on the driver's side at the bottom for supply and drainage 2 partial widths 18 and 36 m / nozzle bar Dualtec 2+2 Rinsing gate Electric tank level sensor Spray nozzles 0.5 at the front + fertilizer nozzle behind it Nozzle XRC11003-VP set, 75 pcs 2 sensors on each side for slope compensation Large tank 6,000 L, rinsing tank 500 L Air compressor with pneumatic system Mechanical ground sensor Optisonic boom height control Variable Tecontrol Varioguide RKT Novatel Emergency steering Optisonic height control Central lubrication Hand wash tank and soap dispenser on the driver's side at the bottom Small storage compartment under the cab on the driver's side Tjdpez Edlvjfx Ahmsc Retractable step with storage area Storage compartment on the passenger side at the bottom Both axles steerable Trailer coupling 2-wheel, 4-wheel Tires: Allianca Agriflex IF 480/80R50, front approx. 60%, rear approx. 80% 2 track widths, Optitrac hydraulic track adjustment Price: € 165,000.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to a value of € 10,000 is the local court of Ludwigslust; for disputes exceeding this value, it is the regional court of Schwerin. Errors, typographical errors, and prior sale are subject to change.

Condition: used, mileage: 366,729 km, power: 175 kW (237.93 HP), first registration: 02/2016, fuel type: diesel, overall weight: 16,020 kg, axle configuration: 2 axles, color: white, gearing type: mechanical, emission class: euro5, loading space length: 7,200 mm, loading space width: 2,550 mm, loading space height: 1,000 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, tail-lift, In accordance with our “General Terms and Conditions,” without any guarantee or warranty, we can offer you the following vehicle on a non-binding basis until completion of the sale, subject to errors, typos, and prior sale: Mercedes Benz 1524 BDF First registration: 25.02.2016 366,729 km Engine: 7,698 cc 175 kW / 240 hp Bluetec 5 Permissible total weight: 16,020 kg Unladen weight: 5,050 kg Payload: 10,970 kg Wheelbase: 5,030 mm Ride height: 1,000 mm Chassis length from rear of cab to rear: 7,200 mm 2 roof-mounted spotlights Large storage box on the passenger side, center + 2 large storage boxes on the driver side, center Zepro tail lift, 2,000 kg, folded at the rear with remote control Trailer coupling Duomatik connections 1 pair of LED work lights behind the cab Sleeper cab with 2 beds Reinforced engine brake Air conditioning, auxiliary heater 2 x electric windows, mirrors, heated mirrors, manual roof hatch Tjdpoz Edlpjfx Ahmjc Radio/CD 8-speed manual transmission with clutch pedal Price: €17,500.00 (net) All information is provided without any guarantee or warranty. Our “General Terms and Conditions” apply. The place of jurisdiction for both parties for disputes up to a value of €10,000 is the local court of Ludwigslust; for disputes exceeding this value, it is the regional court of Schwerin. Subject to errors, typos, and prior sale.

Condition: used, maximum load weight: 2,549 kg, overall weight: 3,500 kg, axle configuration: 2 axles, first registration: 03/2026, loading space length: 3,070 mm, loading space width: 1,750 mm, loading space height: 345 mm, total width: 2,010 mm, total height: 680 mm, A40 NG000588, Tjdpsyn Uhksfx Ahmsc Three-way tipper trailer with tandem axle, manufacturer STEMA, model TRIUS SHDK .2 Zink-BW, gross weight: 3,500 kg, high-loader, hydraulically tiltable with electric pump, rear pendulum tailgate, 3.01 m x 1.83 m. 3,500 kg, overrun braked, high-loader, electric pump, aluminum paneling, rear pendulum side panel. Errors and prior sale excepted, vehicle not prepared.

Condition: used, Year of construction: 2017, operating hours: 3,747 h, Rubber tracks, used vehicle. Tjdoz Ed Anopfx Ahmsc Vehicle no. 3454, Wacker Neuson ET 24 mini excavator, year of manufacture: 2017, operating hours: 3,747, operating weight: 2,441 kg, fully enclosed cab with fan, VDS (Vertical Digging System), Yanmar 3-cylinder diesel engine with 13.7 kW, 300 mm rubber tracks, 1,350 mm blade, hydraulic connections for attachments, Wacker Neuson hydraulic quick coupler QC03, 1 x 1200 mm hydraulic swing-around ditching bucket, 1 x 600 mm deep-reach bucket with teeth. Please contact us for inquiries. Errors and prior sale are subject to change.

Condition: excellent (used), axle configuration: 3 axles, first registration: 09/2013, suspension: air, tire size: 385/65/22.5, Year of construction: 2013, Axle configuration Tedpfxoz Erb Ej Ahmjc Tire size: 385/65/22.5 Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Lift axle; tire tread depth left: 70%; tire tread depth right: 70% Rear axle 2: Tire tread depth left: 70%; tire tread depth right: 70% Rear axle 3: Tire tread depth left: 70%; tire tread depth right: 70% Weights Unladen weight: 10,040 kg Payload: 29,060 kg GVWR: 39,100 kg Condition Technical condition: very good Optical condition: very good Additional information Please contact Maarten Busser or Niels Busser for further information.

Condition: like new (used), ROBOTIC ARM MANUFACTURER: KUKA MACHINE TYPE: KR210-2 TECHNICAL SPECIFICATIONS PAYLOAD: 210 kg REACH: 2800 mm Todpez Eq Tasfx Ahmec YEAR OF MANUFACTURE: 2007 CONTROLLER: KRC2 ED05

Condition: used, Sigmatek DIAS wire plate version 2- compatible with NC4 control - removed from Demag ET 6 system Tedpforr Egzox Ahmoc - removed from running machine - fully functionalmanufacturer: Sigmatek spare part no.: manufacturer no.: Dition: gebraucht

Condition: used, Year of construction: 2004, Working range 1.050 x 650 x 250 mm max. workpiece weight 400 (800) kg control Agievision AGIE max. conicity 30° / 100mm travel -x axis 500 mm travel -y axis 350 mm travel -z axis 426 mm Tedpjw Spa Nefx Ahmoc travel U x V-axis mm rapid traverse X-axis 3 m/min rapid traverse Y-axis 3 m/min rapid traverse U-axis 0,6 m/min rapid traverse V-axis 0,6 m/min rapid traverse Z-axis 0,6 m/min wire dia. 0,2...0,33 mm total power requirement 12,1 kVA weight of the machine ca. 3,9 t dimensions of the machine ca. 2,8 x 2,4 x 2,3 m Wire Eroding Machine AGIE - Agiecut Progress 3

Condition: used, Year of construction: 1991, Used Machine Year of manufacture: 1991 Condition: overhauled; photos show the machine as it was when acquired. Features and Technical Specifications: - Designed for all window tooling systems with tool diameters up to 400 mm - Thanks to the standard braking systems (foot brake for the slotted spindle, automatic electronic safety brake for the saw), the machine can be brought to a stop in just a few seconds - The protective covers for the slotted spindle and crosscut saw are designed so that the tools can be easily and conveniently without having to remove the guards themselves - The crosscut saw can be conveniently adjusted from the workstation using a quick-adjustment mechanism. A six-position turret allows for quick adjustment to various dimensions - The height of the 40 mm slotted spindle can be precisely adjusted using an ergonomically positioned handwheel with 0.1 mm graduations - The sturdy roller table, in combination with hardened and ground guideways, can be easily moved with minimal effort - Slotted spindle motor: 5.5 kW - Slotted spindle speeds: 3000/4500 rpm - Spindle diameter: 40 mm - Clamping length: 140 mm - Slotted spindle height adjustment: 100 mm - Exhaust port: 120 mm - Crosscut saw motor: 2.2 kW - Cutting-off saw speed: 2,950 rpm - Saw blade shank: 30 mm - Max. saw blade diameter: 400 mm - Max. cutting height: 125 mm Tedozk Npyspfx Ahmec - Pneumatic tool clamping - With Festo LAS stop Weight: approx. 600 kg Current photos coming soon! Availability: available shortly Location: Röllbach