Used Continuous Inkjet Printer for sale (8,277)

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand large-format printer, the “Canon Multifunction Pro Puncher B1” Item for sale: 1 x OCE Plot Wave 360 Meter readings: Total: approx. 7,261 pages Ledpfx Ajz Aq I Uogrsrt Condition: This listing is for a second-hand device, which may show signs of wear (minor scratches or yellowing). The device has been tested to ensure it is in working order. A test print can be seen in the photo. Packaging and dispatch: You are welcome to view the device during our business hours. Please arrange an appointment to do so! Sea-worthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you before dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 12,655 h, type of input current: three-phase, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, laser power: 70 W, EOS P396 laser sintering system, built 2017, 12,655 laser hours. The machine is operational and located in the Netherlands, available immediately. It last produced a full validation build in April 2026. Photos and video of that build are available on request, and the parts speak for themselves. Included in the sale EOS P396 machine with switchgear cabinet 2x exchangeable build frames Laser chiller (air/water) PA2200 Balance material licence Touchscreen control terminal Lenovo P3 Ultra workstation, Intel Core Ultra 9, 32 GB, Windows 11, installed 2025 Technical Process: SLS, polyamide Laser: 70 W CO2 Build volume: 340 x 340 x 600 mm Software: PSW 3.8 Supply: 400 V, three phase Condition Lrsdpoz A Sycjfx Agrjt The original control PC failed in 2025 and was replaced with a new Windows 11 workstation, so the control side of this machine has years left in it. It currently runs a touchscreen; the original EOS console and monitor are in storage and can be supplied instead if you prefer the factory configuration. The machine has been maintained throughout its life by EOS and by our own technicians. At the last annual EOS service the laser measured 68.1 W on a 70 W laser, with beam alignment and calibration confirmed. Full EOS service documentation is available to serious buyers. Terms Sold as-is, where-is, ex works. Buyer arranges rigging, crating, transport and insurance. Payment in full before collection. Viewing The machine is in storage and can be viewed by appointment. If you want to see it running, we can recommission it at our facility in Utrecht by arrangement.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 10367, Year of construction: 2022, operating hours: 1,500 h, total length: 496 mm, total height: 1,191 mm, total width: 601 mm, type of input current: AC, overall weight: 81 kg, Key Features & Package Details Build Volume: 192x108x370mm Maintenance History: Serviced annually by TriTech and maintained to ISO 13485 standards. (Note: Ongoing service contracts or technical support packages are not included with the sale). Included Equipment: there is 1x Origin Cure unit and 1x Origin Wash unit that can be included with purchase at no extra cost. There are some consumables (tray sheets etc) and tools are also included. Primary Software: Native management and print preparation via GrabCAD Print. Materials Used: ST45, IND405, IND475, Silicone 25A, and DM200 (compatible with the open Stratasys DLP resin ecosystem). Target Applications: Medical device manufacturing, aerospace, automotive, dental, and production components. (we used the printers primarily for manufacture of patient specific clinical models, but that is not their only application) Lredpfx Agoz Dudgorjt NOTE - We have 5 Origin One printers currently for sale, if there is interest in buying multiple there is room for further negotiation on the price. Reason for sale is because our production workflow changed, making these five printers surplus to what we actually need day-to-day. They’re solid production units with a great service history, we’re just looking to downsize the fleet to match our current output.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 10356, Year of construction: 2022, operating hours: 1,500 h, total length: 496 mm, total height: 1,191 mm, total width: 601 mm, type of input current: AC, overall weight: 81 kg, Key Features & Package Details Build Volume: 192x108x370mm Lrsdpfx Agsz Duhrjrst Maintenance History: Serviced annually by TriTech and maintained to ISO 13485 standards. (Note: Ongoing service contracts or technical support packages are not included with the sale). Included Equipment: there is 1x Origin Cure unit and 1x Origin Wash unit that can be included with purchase at no extra cost. There are some consumables (tray sheets etc) and tools are also included. Primary Software: Native management and print preparation via GrabCAD Print. Materials Used: ST45, IND405, IND475, Silicone 25A, and DM200 (compatible with the open Stratasys DLP resin ecosystem). Target Applications: Medical device manufacturing, aerospace, automotive, dental, and production components. (we used the printers primarily for manufacture of patient specific clinical models, but that is not their only application) NOTE - We have 5 Origin One printers currently for sale, if there is interest in buying multiple there is room for further negotiation on the price. Reason for sale is because our production workflow changed, making these five printers surplus to what we actually need day-to-day. They’re solid production units with a great service history, we’re just looking to downsize the fleet to match our current output.

Condition: used, functionality: fully functional, Year of construction: 2023, operating hours: 70 h, total length: 2,200 mm, total height: 2,600 mm, total width: 1,600 mm, type of input current: three-phase, overall weight: 2,500 kg, input voltage: 230 V, input current: 10 A, compressed air connection: 6 bar, input frequency: 50 Hz, ambient temperature (min.): 15 °C, ambient temperature (max.): 30 °C, volume flow: 15 m³/h, We are offering this used 5000 Massivit 3D printer (only 70 operating hours), year of manufacture 2023. Supply voltage: 220/380-240/415 V Connection type: 3W+N+PE Rated current: 10 A Frequency: 50/60 Hz Short-circuit current: 5 kA Air pressure: 6-8 bar Air flow: 250 L/min Weight: 2500 kg If you have any questions or require more information, please feel free to send us a message or call us. Lodpfx Ajyvhubsgrjrt

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 10342, Year of construction: 2022, operating hours: 1,700 h, total length: 496 mm, total height: 1,191 mm, total width: 601 mm, type of input current: AC, overall weight: 81 kg, Key Features & Package Details Build Volume: 192x108x370mm Maintenance History: Serviced annually by TriTech and maintained to ISO 13485 standards. (Note: Ongoing service contracts or technical support packages are not included with the sale). Included Equipment: there is 1x Origin Cure unit and 1x Origin Wash unit that can be included with purchase at no extra cost. There are some consumables (tray sheets etc) and tools are also included. Primary Software: Native management and print preparation via GrabCAD Print. Lredpfx Ajz Dugnjgrst Materials Used: ST45, IND405, IND475, Silicone 25A, and DM200 (compatible with the open Stratasys DLP resin ecosystem). Target Applications: Medical device manufacturing, aerospace, automotive, dental, and production components. (we used the printers primarily for manufacture of patient specific clinical models, but that is not their only application) NOTE - We have 5 Origin One printers currently for sale, if there is interest in buying multiple there is room for further negotiation on the price. Reason for sale is because our production workflow changed, making these five printers surplus to what we actually need day-to-day. They’re solid production units with a great service history, we’re just looking to downsize the fleet to match our current output.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 10368, Year of construction: 2022, operating hours: 1,700 h, total length: 496 mm, total height: 1,191 mm, total width: 601 mm, type of input current: AC, overall weight: 81 kg, Key Features & Package Details Lrsdpfx Ajz Dudmegrot Build Volume: 192x108x370mm Maintenance History: Serviced annually by TriTech and maintained to ISO 13485 standards. (Note: Ongoing service contracts or technical support packages are not included with the sale). Included Equipment: there is 1x Origin Cure unit and 1x Origin Wash unit that can be included with purchase at no extra cost. There are some consumables (tray sheets etc) and tools are also included. Primary Software: Native management and print preparation via GrabCAD Print. Materials Used: ST45, IND405, IND475, Silicone 25A, and DM200 (compatible with the open Stratasys DLP resin ecosystem). Target Applications: Medical device manufacturing, aerospace, automotive, dental, and production components. (we used the printers primarily for manufacture of patient specific clinical models, but that is not their only application) NOTE - We have 5 Origin One printers currently for sale, if there is interest in buying multiple there is room for further negotiation on the price. Reason for sale is because our production workflow changed, making these five printers surplus to what we actually need day-to-day. They’re solid production units with a great service history, we’re just looking to downsize the fleet to match our current output.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 10369, Year of construction: 2022, operating hours: 1,700 h, total length: 496 mm, total height: 1,191 mm, total width: 601 mm, type of input current: AC, overall weight: 81 kg, Key Features & Package Details Build Volume: 192x108x370mm Maintenance History: Serviced annually by TriTech and maintained to ISO 13485 standards. (Note: Ongoing service contracts or technical support packages are not included with the sale). Included Equipment: there is 1x Origin Cure unit and 1x Origin Wash unit that can be included with purchase at no extra cost. There are some consumables (tray sheets etc) and tools are also included. Lodpfx Agsz Dgfvorsrt Primary Software: Native management and print preparation via GrabCAD Print. Materials Used: ST45, IND405, IND475, Silicone 25A, and DM200 (compatible with the open Stratasys DLP resin ecosystem). Target Applications: Medical device manufacturing, aerospace, automotive, dental, and production components. (we used the printers primarily for manufacture of patient specific clinical models, but that is not their only application) NOTE - We have 5 Origin One printers currently for sale, if there is interest in buying multiple there is room for further negotiation on the price. Reason for sale is because our production workflow changed, making these five printers surplus to what we actually need day-to-day. They’re solid production units with a great service history, we’re just looking to downsize the fleet to match our current output.

Condition: like new (used), functionality: fully functional, Year of construction: 2022, operating hours: 95 h, FDM technology with active heated printing chamber size 300 x 300 mm, 2 nozzles system Ljdpfx Ajymkt Tsgrort

Condition: new, functionality: fully functional, Year of construction: 2023, - In stock, unit is available! - The Rotection flowpack machine is suitable for packaging various products. A large operating display (HMI) ensures easy access to necessary data, such as tubular bag length. Model designation: Rotection tubular bag machine Operating display: 6.8" display Drives: Servo Packing length: 40-400mm Packaging width: 35-160 mm (depending on film width) Packing height: dependent on form shoulder Speed: 80-100 bags/min. in continuous operation Speed: up to 70 bags/min. Intermittently Film width: 90-400 mm Power consumption: 5 KW Power supply: 220-240 V / 50 Hz / 1-phase System weight: approx. 400 kg System dimensions: approx. 4000 x 930 x 1370 mm Lsdeinwi Hspfx Agrjrt Error rate: < 5% *The above information refers to the model: RMFP70. This is a horizontal packaging machine. In the picture gallery you will find various models from our range of systems. Of course we offer you state of the art Box-Motion tubular bag systems. In order to be able to offer you the right packaging system for your requirements, our engineers are available to advise you. Of course, we will supply you with suitable mounting frames for the use of thermal transfer printers, or we will be happy to offer you a suitable system. We would be happy to carry out a test with your product in advance in order to offer you the right form shoulder and to be able to make a statement on the performance.

Year of construction: 1992, condition: used, machine/vehicle number: 1784, ITEK Graphix 985CF / Ryobi 3202MCS – 2-colour continuous forms offset press Year: 1992 Condition: used Price: €3,250 excluding VAT Delivery terms: EXW Son en Breugel, the Netherlands ITEK Graphix 985CF, the ITEK version of the Ryobi 3202MCS, 2-colour offset press for printing continuous stationery and fanfold forms. The machine is equipped with tractor feed and pack-to-pack delivery. The press comes from a small printing company which ceased its activities due to serious health problems of the owner. The machine was mainly used for single-colour printing. After arrival at our warehouse, the machine was thoroughly cleaned. The machine runs and turns mechanically, but it has not printed again after cleaning. Therefore, no recent print test is available. The electronic counter is currently not working because its internal battery is exhausted. The total impression count is therefore unknown. Technical specifications * Number of colours: 2 * Application: continuous stationery / fanfold forms * Feeding system: tractor feed * Delivery: pack-to-pack * Paper width: approximately 127–356 mm / 5–14 inches * Form length: approximately 178–356 mm / 7–14 inches * Length adjustment: in increments of 1/6 inch * Maximum printing size: approximately 330 × 355.6 mm * Paper thickness: approximately 0.06–0.20 mm * Production speed: approximately 4,000–6,000 forms per hour * Dampening system: molleton * Electrical supply: 230 V, single phase, 50 Hz * Power consumption: approximately 550 W * Dimensions: approximately 1,500 × 900 × 1,410 mm * Weight: approximately 550 kg Included * Original Ryobi operating manual * Original Ryobi parts catalogue * Safety documentation * Various loose rollers Lrodozqhgdopfx Agret * Additional trays, shafts, rods and tools * Other accessories shown in the photographs The machine is offered in its present condition and can be inspected by appointment in Son en Breugel, the Netherlands.

Condition: new, Year of construction: 2025, Vertical packaging machine for forming and sealing pillow bags and gusseted stand-up pouches (gusset tool needed) OR for pyramid shaped bags (special sealing unit is than mounted just for it). High-Speed Version with servo driven continuous sealing unit for end sealing. The packaging machine is equipped with: touch screen operating interface; plc; eye mark sensor for seal/cutting position; servo motor for film pulling; ribbon printer for batch number, date, BBD. - Specifications VFFS machine: max. speed of the machine in neutral: 120 cycles/min; bag sizes: L(40-300)xW(60-200)mm, (double film pulling possible for longer bags); suitable film width: 140-420mm; product contact parts from: AISI 304 (optional for surcharge AISI 316); power supply: 220V, 50/60Hz; power consumption: 4.5kW; air pressure: 0.4-0.8MPa; compressed air consumption: 0.2m³/min; weight: 580kg. Ledpov Nnfuefx Agrert Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: Serie number D00794, operating hours: 9,230 h, Stratasys F370 3D printer Ljdpfxjy N Dhqj Agrort

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 221005, functionality: fully functional, Technical Data – AICHELIN Pusher Furnace System Manufacturer: AICHELIN Type: DHLG-50/50/50 System Type: Gas-heated Pusher Furnace Year of Construction: 2012 (system) Control System: Siemens S7-400 Machine No.: 221005 Electrical Data Connected Power: 261 kW Rated Current: 383 A Supply Voltage: 400 V / 50 Hz Furnace Data Heating: Natural Gas Max. Furnace Temperature: 500 °C Protective gas operation possible Continuous pusher operation Batch Data Max. Batch Weight: 10,000 kg Continuous heat treatment of large series components Application Area Hardening Tempering Stress-relieving annealing Preheating Heat treatment of forged and cast parts Gearbox and drive components Equipment Siemens S7-400 control system Automatic loading and pusher system Gas-heated industrial furnace Protective gas atmosphere possible Fully automatic series operation Typical Applications Automotive industry Forging operations Gearbox manufacturers Heat treatment companies Supplier industry Special Features Very high batch capacity of up to 10 tons Lsdpfezf Upnox Agrort Modern Siemens PLC control system Energy-efficient gas heating Suitable for high production volumes in 3-shift operation Ideal for the heat treatment of gearbox parts, shafts, gears, and forged parts This AICHELIN DHLG-50/50/50 is a modern industrial heat treatment system and is significantly more valuable than a comparable standard tempering or chamber furnace. The system is particularly interesting for forging companies, gearbox manufacturers, foundries, and contract heat treatment companies.

Condition: like new (used), functionality: fully functional, machine/vehicle number: D31369, Year of construction: 2019, operating hours: 73 h, total length: 864 mm, total height: 1,626 mm, total width: 711 mm, type of input current: AC, overall weight: 227 kg, input voltage: 230 V, input current: 7 A, input frequency: 50 Hz, table width: 355 mm, table length: 254 mm, construction height: 355 mm, --- RARE OPPORTUNITY --- Stratasys F370 for sale due to business closure. Barely used, with only 70 operating hours—essentially in like-new condition. This printer is ideal as an addition to existing machine parks or as a high-quality all-rounder for newcomers to 3D printing. Lrsdpfx Aoxgh U Tjgrst The printer is currently packaged and in storage. It was inspected and serviced by the manufacturer’s authorized distributor prior to proper decommissioning. The most recent exported cfg file can be provided upon request. The F370 was designed with user-friendliness in mind, offering a powerful and virtually maintenance-free 3D printing system that is quick to learn and easy to operate. It supports a wide selection of materials for various 3D printing applications, typically including prototyping, the production of tools and fixtures, as well as low-volume manufacturing of end-use parts. Its compact footprint and quiet, safe operation—without requiring special arrangements—make the F370 ideal for workshops, offices, or even classroom environments. With soluble support material, even complex geometries with internal cavities can be created—uncommon in this class of printers. The four easily accessible material spool bays on the front (2x model & 2x support) allow for quick material changes. The complete package is rounded off by the GrabCAD Print and Insight design-to-print software applications, automatic calibration, an integrated camera for remote print job monitoring from your computer, and an intuitive front-panel interface.

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 3,075 h, total length: 483 mm, total height: 914 mm, total width: 564 mm, overall weight: 48 kg, For sale is an X7 3D printer from Markforged. The printer was used exclusively in a clean environment and is fully functional. Furthermore, the extruder and the print head were replaced recently, upgrading the printer to a Gen2 model. This also enables turbo printing. Lodpfx Agewhduusrert

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, We have here a HSA systems HS1000 vacuum mailtable with 2 inkjet heads available. Year 2017 but was a demo machine so is not being used much, like new! Has never seen production. Complete with a streamfeeder V1000 friction feeder and the TIPC15 touchscreen together with 2 cartridge printheads, one with 3 cartridges and the other with 2 cartridges you are able to print envelopes and documents very ease with high speed Lrjdpfxsy R Dhao Agret

Year of construction: 2014, condition: excellent (used), functionality: fully functional, For sale the CNC UV DIGITAL PRINTER Mimaki Engineering Lrsdpfx Agozxbp Ujret Type: JFX500-2131 Year: 2014 in PERFECT working condition from small family business ! Maximum print area: 2100 × 3100 mm Head clearance (max. media thickness): up to 50 mm Maximum resolution: 1200 × 1200 dpi Print speed: up to 60 m²/h

Year of construction: 2007, condition: used, This HEGE continuous powder drying system, type 405-104/0, will be auctioned off online in our industrial auction / machine auction follow-up auction, J&S GmbH Automotive Technology - Machine Park. You can find this and many other items on our platform. Lsdpszyf Udefx Agrort

Condition: excellent (used), Year of construction: 2019, operating hours: 12,000 h, functionality: fully functional, - Used continuous processing system (belt grinder) - The processing trough needs to be replaced. Ljdpfozqunzjx Agrsrt

Condition: used, functionality: fully functional, Year of construction: 2016, total length: 100 mm, total height: 100 mm, total width: 95 mm, overall weight: 570 kg, input voltage: 230 V, input current: 8 A, input frequency: 50 Hz, electrical fuse: 16 A, power: 1.7 kW (2.31 HP), We are offering this used EOS M 100 dental 3D printer, manufactured in 2016, for sale. Serial number: SI 2764 Wiring diagram number: 250000543 Year of manufacture: 2016 Voltage (1~/N/PE): 230 V Voltage (2~/PE): 200–240 V Current consumption (1~/N/PE): 8 A Current consumption (2~/PE): 8 A Mains fuse rating (1~/N/PE): 16 A Lrodpjy Szv Rofx Agrot Mains fuse rating (2~/PE): 15 A Frequency (1~/N/PE): 50 Hz Frequency (2~/PE): 60 Hz Rated power: 1.7 kW Rated short-circuit current: 5 kA Total weight: 570 kg If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 560 h, Consumables worth €5,000 included! HP consumables, all sealed and in original packaging: 5 x 500ml fusing/detailing agent (~5 x €270 = €1,350) 12 x color agents (all colors, ~12 x €130 = €1,560) 1 x color printhead kit (~€950) 1 x printhead kit (~€950) 1 x PA12 Powder Lrjdexm Uypopfx Agret We are selling our lightly used HP MJF-580 printer. The unit has exclusively been operated under a valid HP service contract. No contract is currently active. The printer is capable of producing parts in all colors. Collection is to be arranged by the buyer.

Condition: good (used), Year of construction: 2017, 3D Printer ORLAS CREATOR SLM250, MFG 2017,-the equipment shows little use; the tablet has a cracked screen; it does not have a 3D scanner component, SN: SLM250172801 makes complex parts, using metallic or non-metallic powders; wireless controller; benchmark dimensions achieved: 100 x 100 mm; gas used as protective atmosphere: argon/nitrogen; layer size: 20-100 micrometers; laser type: Yb Fiber Laser 250 W; wavelength: 1070 nanometers; Precision F-Theta lenses; dimensions: 717x858x1794 mm; mass: 470 kg; specific software: Creator user interface, APP Suite application "3D printing"; IMPORTANT: The equipment shows little use; the tablet has a cracked screen; it does not have a 3D scanner component; Specifications Building volume: ø = 110 mm x 100 mm Powder reservoir volume: ø = 110 mm x 200 mm High power 250W cw Yb: Fibre laser Wave length: 1070 nm High efficiency Exceptional beam quality and power stability Air cooled Spot size: 40 µm - 120 µm Process chamber • High-end process chamber, suitable for low-oxygen process environment • Recommended inert gas: Argon / Nitrogen • included extraction unit for cleaning of the process environment (max. flow rate: 190m³ / h) Coating system - 360° circulating coater for high efficient coating process - Rubber coating blade - Micrometre screws for optimum coater alignment User interface - 12’’ Microsoft Surface Pro 3 tablet controller - Unique wireless control concept - Easy control of all printing parameters - Cloud manufacturing concept Dimensions - System dimensions: 717 mm x 858 mm x 1794 mm - Machine opening: 450 mm x 180 mm - Power supply: (V/Ph/Hz): 230/1/50 - Power setting: max. 10 A - Weight: 430 kg CAD / CAM Software APP SUITE, including 3D printing application - solid slicing of 3D objects - extended repair functionality of 3D parts - automatic generation of support structures - complete control of all printing strategy Parameters Welcome Package - - APP SUITE Software Basic Package - - Accessories Zero-Point Clamping System - - Adjustment aid for aligning the construction platform - - Hose adapter for inert gas supply 6mm to 1/4inch - - Cleaning cloths and optics cleaning liquid - - ESD brush for safe system and component cleaning - - Allen key set - - Stainless steel shovel Price Euro 38,900 Euro + VAT, FCA: Bucharest/ Romania Ledpfeunaqvsx Agrsrt Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, Model name: Videojet 1610 DH (Dual Head) Printing technology: Continuous Inkjet (CIJ) Number of printheads: 2 Maximum number of lines per printhead: up to 5 Printing speed (1 line): 293 m/min Printing speed (2 lines): approx. 146 m/min Printing speed (3 lines): approx. 81 m/min Ink type: Color-based ink (CIJ) Protection rating: IP65 (dust-proof and protected against water jets) Maintenance interval: up to 12,000 operating hours (preventive maintenance) Hose length, printhead to controller: Standard 3 m, optional 6 m Text memory / messages: 250 memory locations Interfaces: USB, Ethernet, RS-232 (serial) Special features: Smart Cartridge™ System, CleanFlow™ Technology, Plug-&-Play printhead module Housing material: Stainless steel (suitable for harsh production environments) Operating temperature range: 5 °C to 45 °C Relative humidity: 10 % – 90 % (non-condensing) Power supply: 100–120 V / 200–240 V, 50/60 Hz Lrsdpfx Aek H R Rxegret Weight: approx. 25 kg Condition: Used Note: All technical specifications were taken from publicly available internet sources (e.g. manufacturer information) and are provided without guarantee of accuracy or completeness.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, type of input current: three-phase, input voltage: 380 V, For sale are two flexographic printing units removed from an Autobox 2600+2x FelexoPrint+Multicut machine. The machine has a working width of 2600 and is from 2017. The printing units are practically unused and come with ceramic anilox rollers. Ljdpfx Aozq Eg Uogrjrt The maximum printing format is 1150 x 990 mm.