Used Controls Hydraulic Press Controls Automax 5 for sale (92,084)

Condition: good (used), Year of construction: 1971, pressing force: 630 t, Manufacturer: Sack & Kiesselbach Model: EP 630 Isdpjwxw Amofx Ai Rotk Mode of operation: oil-hydraulic Table height: 1175 mm Stroke: 305 mm Tool installation height: 317 mm Rapid approach descending speed: 6.9 mm/s Pressing speed: 0.3 mm/s Return speed: 6.3 mm/s Drive power: 11 kW Electrics: 550 V / 60 Hz Information without guarantee.

Year of construction: 1994, condition: ready for operation (used), Connected load: 12kW, length: 1770mm, width: 1250mm, height: 3700mm, weight: 13.2t, operational hours counter: 39,671h, with documentation, an inspection is possible. Iodpenxk I Refx Ai Retk

Condition: as good as new (ex-display), Year of construction: 2018, machine/vehicle number: DF0151 - Rev.00, pressing force: 110 t, pressure:110 t passage width:800 mm stroke:500 mm Approx. weight (w/o operational materials):5 t Measurements L x W x H:ca. 1950 x 1510 x 3145 mm Return Capacity:11 t Engine Output:20 kW Cylinder diameter:200 mm Max Working height:700 mm Approaching Speed max. :195 mm/sec Pressure Speed:1 - 15 mm/sec. Return Speed:5 - 140 mm/sec Travel:500 mm Ram plate:800 x 600 mm Thickness of ram plaet:6 Zoll Table size:800 x 700 mm Table height above ground level (approx.):900 mm Oil Tank Capacity:400 l Program Memory:200 prgms Monitor Siemens:10 Zoll Itjdpfx Aiodxrqwj Rsk Siemens Control System:S7 1200 Lightcurtains by Schmersal:700 mm Speed controlled via proportional valve for speeds between 5 to 195 mm/sec on approach, 1 to 15 mm/sec during pressure phase and 5 to 140 mm/sec during return. HMI - pressure regulation for capacity of hydraulic cylinder from 20 to 110 tons Siemens remote access for maintenance purposes Motor with energy efficiency level IE3 according to CE

Year of construction: 1994, condition: good (used), machine/vehicle number: 24.105, A used, well-maintained hydraulic press brake HATASTAR, equipped with: - CYBELEC DNC 70 control system - Controlled axes Y1, Y2, X, R - Hydraulic upper tool clamping - Hydraulic crowning - FIESSLER AKAS safety system - Tools - Press brake manual - Documentation Iodpfx Ajfthzksi Rstk Bending length 4600 mm Frame width 4100 mm Pressing force 1350 kN Stroke 220 mm Rapid traverse 140 mm/sec Working speed 10 mm/sec Return speed 100 mm/sec Further technical data can be found in the PDF document. Technical data and dimensions: Subject to change.

Condition: excellent (used), Year of construction: 2014, Hydraulic Press Bunorm 4S-500 Manufacturer: Bunorm AG Model: 4S-500 Year of Manufacture: 2014 Pressing Force: 500 kN Maximum Pressure: 225 bar Weight: 3,200 kg Electrical Connection: 3×400 V + N + PE Frequency: 50 Hz Protection: 20 A Control System: Siemens Simatic HMI Touch Safety System: SICK C4000 Light Curtain SCOPE OF DELIVERY Includes, among others (non-exhaustive list): Hydraulic Press Bunorm 4S-500 Exact scope of delivery as shown in the photo series. Itsdpfexfl Axjx Ai Rjk The Bunorm 4S-500 hydraulic press impresses with its robust construction and a pressing force of 500 kN at a maximum pressure of 225 bar. With its solid build and a weight of 3,200 kg, the press is suitable for demanding production applications. The integrated Siemens Simatic HMI Touch control system enables precise and user-friendly operation. Thanks to the modern SICK C4000 light curtain safety system, a high level of operator protection is ensured. This machine is the ideal solution for companies that value reliability, precision, and safety. No guarantee is given for the correctness, completeness, or currentness of the information provided.

Condition: used, Single-column hydraulic press EXNER Type EEX 20 S - Machine no.: 1615 Year of manufacture: 1980 - Pressing force: 20 tons - Throat depth: 180 mm - Table size: 380 x 350 mm Iodpfxsyz Dtde Ai Rstk - Table opening: Ø 50 mm - Ram surface: 310 x 250 mm - Clamping shank: Ø 35 mm - Ram stroke: 100 mm - Max. installation height: 250 mm - Table height above floor: 900 mm - Descent speed: approx. 480 mm/s - Return speed: approx. 480 mm/s - Working speed: 20 mm/s - Hydraulic tank capacity: 110 liters - Hydraulic operating pressure at 20 tons: 200 bar - Motor output: 4 kW - Power connection: 400 Volt, 50 Hz - Stroke release via two-hand control or light barrier - Operating modes: setup, two-hand operation, BWS - SICK light curtain, type LVU, with single- and double-stroke settings and safety function - Rapid approach and working stroke - Stroke limitation dependent on pressure or travel - Mechanically adjustable solid stop - Press force adjustment manually via knurled wheel - Control cabinet mounted on the side of the machine - Operating manual and electrical schematics included - Stroke counter - Space requirement (L x W x H): 1250 x 750 x 2000 mm - Weight: 1.4 tons In good condition

Condition: used, Year of construction: 1992, functionality: fully functional, pressing force: 250 t, stroke length: 400 mm, table width: 1,250 mm, table length: 1,150 mm, die cushion stroke: 150 mm, installation height: 700 mm, Hydraulic double column press DUNKES HDS 250/10 Isdpfxjup Si Hj Ai Rstk Year of construction 1992 Technical data: Pressing force at 260 bar: 250 tons Rapid lowering speed: 365 mm/s Table clamping area approx.: 1150 x 1250 mm Ram clamping area approx.: 1150 x 1250 mm Die cushion area approx.: 800 x 1000 mm Die cushion pressing force (200 bar): 100t Die cushion stroke: 150mm Power requirement: 45 kw Installation height: 700 mm ram stroke: 400 mm Conversion of the control system to SIEMENS (in 2005) Machine height approx. 5,400 mm TP language currently Polish

Condition: good (used), Year of construction: 1981, machine/vehicle number: 022-009-36, Offer 24374 Technical Data: - Max. pressing force: 100 t Ijdpfx Aijxuhzcs Rotk - Max. ram stroke approx.: 500 mm - Stroke speed: 25 mm/sec - Return speed: 125 mm/min - Installation height approx.: 1000 mm - Throat depth (to ram center): 380 mm - Ram clamping surface: 530 x 400 mm - Ram clamping pin: 40 mm - Table size: 750 x 560 mm - Table bore / through-hole: 200 mm - Table height above floor: 720 mm - Oil capacity approx.: 200 ltr - Drive: 400 V / 11 kW - Space requirements approx.: W 1150 x H 3250 x D 1850 mm - Weight approx.: 4600 kg

Condition: good (used), Year of construction: 2021, machine/vehicle number: H 21-3743, Offer 26175 Technical data: - max. pressing force up to 25 t - max. ram stroke 160 mm - installation height without straightening unit 675 mm - overhang to the center of the ram 250 mm - table size approx. 1300 x 300 mm - working speed, roughing approx. up to max. 30 mm/s - working speed, finishing approx. 100 mm/s - oil capacity approx. 150 liters - drive 400 V / 10 kW - space requirement approx. W 4900 x H 2400 x D 1500 mm - weight approx. 3000 kg - including: - straightening table extension 2030 + 1520 mm - traversing carriage with mounts on the straightening table - pointed die holder Itsdpfjzh Edbex Ai Rok - roller die holder - straightening ram - pivoting feeler gauge with dial indicator

Condition: new, Year of construction: 2026, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, type of input current: three-phase, pressing force: 125 t, stroke length: 120 mm, table length: 3,200 mm, throat depth: 230 mm, ram plate length: 3,200 mm, distance table to ram: 390 mm, clearance between the columns: 2,700 mm, oil tank capacity: 200 l, total length: 3,870 mm, total width: 1,550 mm, total height: 2,400 mm, overall weight: 7,500 kg, warranty duration: 12 months, Equipment: CE marking, documentation/manual, safety light barrier, HYDRAULIC CNC PRESS BRAKE MTP 125 × 3200 MTP-3212 Touchscreen Control The MTP 125 × 3200 hydraulic CNC press brake is designed for accurate and efficient sheet-metal bending. It delivers 125 tonnes of pressing force and offers a maximum bending length of 3200 mm. The machine can process sheet metal up to 6 mm thick. Ijdpfxsytp N Ho Ai Retk It is suitable for workshops and manufacturers operating in electromechanical engineering, light industry, agricultural machinery production, shipbuilding, automotive, aerospace and other metalworking sectors. CONTROL AND EQUIPMENT - X-axis back gauge with servo drive - Y-axis beam adjustment with servo drive - Manual R-axis back-gauge finger height adjustment - Back-gauge travel: 600 mm - Two front material supports - AMADA-style quick punch-clamping system - Mobile controller - Control panel mounted on a movable arm - LED working-area lighting MTP-3212 CNC CONTROLLER The MTP-3212 features a large colour touchscreen and an intuitive, user-friendly menu. The software automatically calculates the bending angle, simplifying machine setup and improving production efficiency. The controller can store data for up to 40 punch types. HIGH-QUALITY COMPONENTS The hydraulic system uses high-quality German Rexroth valves. The electrical system incorporates Schneider Electric components, while safety components are supplied by Omron and Schneider. Steel hydraulic connections significantly reduce the risk of future leaks. SAFETY EQUIPMENT - Clearly visible safety markings - Side guards - Rear safety gate - Easily accessible emergency-stop switches - Safety light curtain preventing accidental access between the punch and die The machine is supplied with a Polish-language operating manual and a CE Declaration of Conformity. TECHNICAL DATA - Maximum sheet thickness: 6 mm - Pressing force: 125 t - Maximum bending length: 3200 mm - Distance between columns: 2700 mm - Throat depth: 320 mm - Ram stroke: 120 mm - Maximum opening height: 390 mm - Back-gauge travel: 600 mm - Motor power: 7.5 kW - Weight: 7500 kg - Dimensions (L × W × H): 3870 × 1550 × 2400 mm - Front supports: 2 - Controller: MTP-3212 - Punch clamping: AMADA-style quick clamping TECHNICAL SUPPORT Our specialists can assist with planning bending sequences for complex parts, selecting suitable materials and tools, and choosing optimal working parameters. Pre-purchase technical consultation is also available to help select the correct machine and accessories. Delivery can be arranged. Transport costs are calculated individually according to the destination. Please provide the delivery address or postal code to receive a quotation.

Condition: new, TIGERMETAL WH100 – Hydraulic Workshop Press 100 Tons | Electric + Manual Pump Instead of €10,489 gross RRP, now only €6,699 net (€7,972 gross incl. 19% VAT). You save -24% compared to the RRP! The TIGERMETAL WH100 workshop press is a high-performance and robust industrial press designed for demanding applications in workshops, production, and maintenance. With a pressing force of 100 tons, the machine is ideal for heavy-duty straightening, pressing, and bending operations. Thanks to the combination of electric drive and manual hand pump, the press offers maximum flexibility: fast operation in automatic mode and precise fine control for sensitive applications. 🔧 Technical Data: Model: WH100 Manufacturer: TIGERMETAL Pressing force: 100 tons Drive: Electric motor + manual pump Motor power: approx. 3 kW Connection: 400V – 16A – 50 Hz Max. working pressure: approx. 320 bar Stroke: approx. 400 mm Working width: approx. 1000 mm Max. working height: approx. 1000 mm Weight: approx. 820 kg Advantages: ✔ Combined operation (electric + manual) ✔ Extremely high pressing force for heavy-duty applications ✔ Precisely controllable pressure ✔ Laterally movable cylinder for flexible positioning ✔ Height-adjustable crossbeam ✔ Heavy-duty, durable steel construction ✔ Integrated pressure gauge (manometer) ✔ Safety valve for overload protection Ijdjf Sqcyopfx Ai Rotk ✔ Optionally expandable with accessories The laterally movable cylinder and the height-adjustable working table allow optimal adaptation to a wide variety of workpieces and applications. The massive steel construction ensures maximum stability and a long service life—even under intensive industrial use. The WH100 is the perfect choice for anyone looking to combine maximum pressing power with precise control and industrial reliability. A wide range of additional workshop presses in various designs, sizes, and optional equipment is available! Some images may show a slightly different version than the one offered here. The version shown in some pictures may include an additional automatic function. Available versions: 30 tons 60 tons 100 tons 150 tons 200 tons 200 tons: on request Custom machines: on request New machine! We are also happy to manufacture a custom-built press tailored to your requirements. The press can be tested on-site under power. ----- We are happy to provide individual consultation and prepare a tailored offer. Simply send a non-binding inquiry! ----- The stated price is net plus 19% VAT. All information without guarantee! Delivery available throughout Europe! The European Commission provides a platform for online dispute resolution (OS platform). This offer serves solely as an online presentation of our products. Contract negotiations are conducted via telecommunication (email, fax, phone, messaging platforms). You will first receive a non-binding offer including our general terms and conditions as well as information on your right of withdrawal before any purchase/contract is concluded.

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, power: 8.75 kW (11.90 HP), pressing force: 25 t, stroke length: 500 mm, operating speed: 100 mm/s, reverse speed: 450 mm/s, table width: 630 mm, table length: 500 mm, ram plate width: 450 mm, ram plate length: 360 mm, clearance between the columns: 800 mm, total length: 16,500 mm, total width: 10,500 mm, total height: 27,500 mm, overall weight: 2,200 kg, die cushion stroke: 160 mm, Hydraulic press PYE 25 S1M with ejector. Year of manufacture: 1987. Manufacturer: VEB Wema Zeulenroda (Germany). Ijdpfx Aistzwxdo Rjtk Specifications: Maximum pressing force: 25 tons. Working pressure: 16 MPa. Upper table: 450 x 360 mm. Lower table: 630 x 500 mm. Clearance: 800 mm. Cylinder stroke: 500 mm. Downward speed: 100 mm/sec. Upward speed: 450 mm/sec. Lower ejector force: 10 tons. Lower ejector stroke: 160 mm. Power requirement: 8.75 kW. Weight: 2200 kg. Height: 2750 mm, Length: 1650 mm, Width: 1050 mm. Very good technical condition. The machine has undergone a complete overhaul. Machine can be inspected and tested under power.

Condition: ready for operation (used), Year of construction: 2000, pressure 85.0 t chamfer lenght 2050 mm distance between columns 1650 mm column arm 400 mm stroke 240 mm dayligth 320 - 560 mm ajustment speed 150 mm/sec working feed 15.0 mm/sec return speed 150 mm/sec back stop - adjustable 5.0 - 1000 mm table width 110 mm work height max. 1050 mm operating pressure max. 297 bar compressed air 4.5 - 6.0 bar oil volume 200 l operating pressure 340 bar total power requirement 7.5 kW weight of the machine ca. 5900 kg range L-W-H 4100 x 2100 x 2750 mm with increased installation height / piston stroke well-maintained condition (!!) - in checked condition - machine video - ?v=ikl6RNZWeiU Equipment: - CNC electro-hydraulic press brake - including CYBELEC CNC control * swiveling control panel at the front right * external screen - CNC axis adjustment: Y1 - Y2 - X - R - Z1 - Z2 - I + CNC crowning - CNC electro-motorized back stop (X axis) * Travel range .. 5.0 - 1,000 mm * Travel speed .. 250 mm/sec. Itsdoxab Ugopfx Ai Rok - CNC electro-motorized height adjustment of the back stop (R axis) * Travel range .. 70 - 235 mm * Travel speed .. 100 mm/sec. - CNC electro-motoric adjustment of the stop fingers (Z axes) * Travel range Z1 .. 405 - 1.565 mm * Travel speed .. 1.000 mm/sec. * Travel range Z2 .. 485 - 1.645 mm * Travel speed .. 1.000 mm/sec. - CNC electro-motoric table crowning - CNC pneumatic die displacement (I axis) - EHT pneumatic tool clamping - upper tool - EHT manual tool clamping - lower tool * Tool holder 90.0 mm + 13.0 mm possible - 1x freely movable 2-hand/foot control - 2x front, stable support arms including "sliding system" - side protective device (swinging doors) - rear protective device (swinging door) - original operating instructions + circuit diagram etc. * Special accessories included: - Oil cooler for use in continuous operation

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, operating hours: 9,800 h, Description EDEL - STANZTECH PROFILTEC - 2030 WITH LOW HOURS - 9800 HOURS MACHINE RUN PER DAY 2 TO 3 HOURS ONLY MACHINE IS ECELLENT CONDITION LENGTH OF WORKING 3000mm tubes TECHNICAL DETAILS Riexinger control system: V1.0 Punching force: 260kN Drive system: hydraulic Stroke sequences: max. 50 1/min Feed length: 3,000 mm Max. Lifting height: A-axis 60 mm Max. Positioning speed: X-direction programmable up to max. 64 Smallest programmable linear axis travel: 0.1 mm MACHINE DETAILS Hydraulic operating pressure: 190 bar Nominal power of the pump motor: 15kW Pump capacity: 2 x 48 l/min Tank capacity of hydraulic unit: 200 l Connected load: kVA 22 Operating pressure: min. 6 bar EQUIPMENT - Standard accessories Itjdpfx Aovk R Rpoi Rek - Hydraulic unit - Switch cabinet - Roller conveyor - Documentation MACHINE WEIGHT 2000 KG

Condition: used, Year of construction: 2007, Lamination press Manufacturer: Dimter Type: PROFIPRESS L2500 Year of manufacture: 2007 Itedjzuzwqopfx Ai Rjk Technical data Wood dimensions to be processed Wood width, panels: 30 - 150 mm Wood thickness: 11 - 60 mm Wood inlet length: 800 - 2500 mm Panel widths, variable: max. 1300 mm Specific pressing pressure for cross-sections of 2500 x 60 mm: up to 1.6 N/mm2 The pressing surface per press cycle must not be smaller than 100 cm2 Filling width of the press per cycle: min. 650 mm / max. 1300 mm Max. filling area of the press per cycle: 3.25 m2 (The max. usable press width depends on the widths of the individual lamellas.) Wood type Softwood/hardwood Press without options Electrical connection, press: 7 kW Electrical connection, 40 kW generator: 56 kW Operating voltage: approx. 400 Volt / 50 Hz (C/s) Collection table extended to 3700 x 1300 mm, with stainless steel wood support Motor-driven multi-function slider Lamination press Profipress L 2500 Press bed area approx. 2500 x 1300 mm Sturdy base frame with lower press table made of stainless steel as a grounding electrode Quick-change stop guide sets for panel thicknesses of 19 - 40 mm, which can be hydraulically adjusted to the current filling width Hydraulic special pressure elements ensure uniform pressure distribution over the entire joint length and compensate for tolerances In multi-lane operation, filling widths may vary by a maximum of 15 mm Upper pressure plate with hydraulic drive generates high vertical pressing pressure for minimal displacement Integrated hydraulic unit for generating pressing force and driving the hydraulic motors Control cabinet and control panel Protective cladding Additional individual pressure elements from above Automatic gluing station with precision gluing head Infeed for different widths Camera Washing and rinsing device for gluing head Modem incl. software for online connection Note: The technical data and descriptions are copies of the order confirmation from that time. The information is provided for informational purposes only and is non-binding.

Condition: good (used), Year of construction: 2012, Condition: 2012 overhauled to the latest UVV Installation height: 800 mm Ram stroke: 500 mm Projection: 360 mm Nominal force: 400 kN Isdpfxszvnfde Ai Rstk Hydraulic pressure: 160 bar Operating hours: 1356 Other: new control from Pilz, electrical circuit diagrams available Video about functionality available

Condition: used, Manufacturer: EXNER Type: EX 20 Maximum pressing force: 20 t Table size: 480 x 350 mm Maximum tool height: 230 mm Iodpfxjxbf Nds Ai Retk

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, pressing force: 100 t, stroke length: 500 mm, operating speed: 200 mm/s, reverse speed: 200 mm/s, table width: 750 mm, table length: 560 mm, ram plate width: 530 mm, ram plate length: 400 mm, total length: 1,900 mm, total width: 1,200 mm, total height: 3,200 mm, overall weight: 5,040 kg, Equipment: documentation/manual, Hydraulic press PYE 100 S1M with ejector. Manufacturer: Werkzeugmachinen GmbH Zeulenroda (Germany), year 1990. Specifications: Maximum pressing force 100 t. Operating pressure 16 MPa. Maximum ejector force 40 t. Ejector piston stroke 200 mm. Upper table 530x400 mm. Lower table 750x560 mm. Clear opening 800 mm. Cylinder stroke 500 mm. Downward speed 200 mm/s. Upward speed 200 mm/s. Power requirement 17 kW. Weight 5040 kg. Height 3200 mm, length 1900 mm, width 1200 mm. Isdpfxeygtzyj Ai Rjtk

Condition: new, Year of construction: 2024, functionality: fully functional, operating hours: 818 h, pressing force: 350 t, stroke length: 890 mm, warranty duration: 12 months, 📋 Technical Specifications (English) Capacity: 350 Tons at 250 bar (including auxiliary cylinders) Main Cylinder: Ø395 mm, Rod Ø300 mm, Stroke: 890 mm Auxiliary Cylinders: Ø80 x 100 mm, Rod Ø50 mm, Stroke: 890 mm Cushion Cylinders: Ø180 x 230 mm, Rod Ø115 mm (4 units) Motor: 18.5 kW – 25 HP, 1500 rpm, IE3, 380 V Pump: 71 cc, 105 L/min, variable displacement, pressure-compensated piston type (Taiwan, imported) Valve Block: NG-16, 24 DC, P-Q proportional control Equipped with precise proportional control for all movements: pump protection valve, decompression relief valve, ram–cushion line, pressure transmitter, auxiliary throat protection valve, cushion-seal protection valve, free fall valve. Electrical Panel: Siemens Screen: GMT 7” (domestic, 1-year warranty) Pre-Fill Valve: NG 160 (Taiwan model) Speeds: Down fast speed: 175 mm/s (P-Q proportional adjustable) Up fast speed: 285 mm/s (P-Q proportional adjustable) Pressing speed: 5 – 14.5 mm/s (P-Q proportional adjustable) Dimensions: Table 1200 x 1000 mm, Daylight 1000 mm Linear Scale: Yes Itodpfxoxf Dzgo Ai Rsk Light Curtain: Yes Machine Weight: 15,000 kg ± Oil Tank: 1300 x 900 x 600 mm, 700 L capacity

Condition: used, Double-column hydraulic press, NEFF type RHS 125 Z Hydraulic drawing press Machine no. 3973, year of manufacture 1983 Pressing force 125 tons Column width 1050 mm Column opening, side 550 mm Table area 1000 x 800 mm Ram area 1000 x 800 mm Ram stroke 350 mm Installation height max. 750 mm Table height above floor 960 mm Drawing cushion force approx. 12 tons at 105 bar Iodpfx Aoguvtlei Rotk Drawing cushion stroke 100 mm Through-hole in the table Ø 202 mm Rapid traverse speed, downward approx. 360 mm/sec Rapid traverse speed, upward approx. 360 mm/sec Working speed approx. 36 mm/sec Oil tank capacity approx. 1000 liters Motor power, main pump 22 kW Motor power, control pump 4 kW Motor power, control pump 2.2 kW Power connection 400 volts, 50 Hz - Hydraulic drawing cushion under the table with a hole through the table plate Ø 202 mm - Precise 4-way column guidance on the ram corners - Stepless pressing force adjustment - Adjustable fixed stop, electrically controlled via a hydraulic motor - Stroke damping - 2-hand control panel for releasing the lifting motion on the press - Control cabinet positioned next to the press (1600 x 500 mm) - Documentation including operating manual, electrical wiring diagram, and PLC program printout available Space required for the press L x W x H 2600 x 2400 x 4270 mm Weight approx. 14 tons Good condition

Condition: used, Single-column hydraulic press with draw cushion RÖCHER Type REP 100.01 SZ Hydraulic deep-drawing press Machine No. 15.499 Year of manufacture 2003 Pressing force: 100 tons Ram stroke: 500 mm Throat depth: 370 mm Installation height: 600 mm Table surface: 850 x 700 mm with a drop-through hole Ø 150 mm Ram surface: 700 x 600 mm Ram ejector force: 16 tons (160 kN) Ram ejector stroke: 100 mm Ram ejector with internal thread M24 x 1.5 mm Draw cushion force: 40 tons (400 kN) Draw cushion stroke: 200 mm Draw cushion area: 530 x 530 mm Pressure holding time: 0 to 90 sec. Table height above floor: 910 mm Hydraulic operating pressure: max. 300 bar Hydraulic tank capacity: 700 liters Approach speed (rapid traverse): approx. 400 mm/sec. Pressing speed up to 23.8 tons (238 kN): 5 to 68 mm/sec. Pressing speed up to 100 tons (1000 kN): 5 to 16 mm/sec. Return speed: 50 to 400 mm/sec. Main pump drive power: 18.5 kW Auxiliary pump drive power: 4 kW Power supply: 400 Volt, 50 Hz (63 Amps) - Operation and programming via PC 670 touch panel, keyboard and mouse - Machine control via SIEMENS S7-300 PLC system Ijdpfxoyupulo Ai Retk - Ram stroke and press force programmable via control system - Draw cushion with drawing and ejector function - Draw cushion force infinitely adjustable - Ram and draw cushion equipped with direct linear measurement system - Draw cushion can be moved in and out under the press area, for punching work using the drop-through hole - Floor-level installation, draw cushion does not penetrate the floor - Pressure and stroke cutoff - Fixed stop with indirect measurement system - Pressure holding time infinitely programmable - Table with holes for the draw cushion ram rods - Ram with ejector - Knock-out damping - Stroke triggering via two-hand operation, foot switch, hand lever and push button on the control panel - LEUZE light barrier as reach-in protection for safety operation - Front mirror columns on the press table can be shifted laterally - Electrical control cabinet mounted on machine frame - Hydraulic oil cooler with fan motor (oil-air cooling) - Manual central lubrication pump - 2x hose connections for tool tempering or cooling at the ram - Piece counter in the control system - 306 read operating hours - Operating manual, hydraulic diagram, and electrical diagram available Space requirements (L x W x H): 3100 x 1800 x 4160 mm Weight: approx. 13 tons Very good condition, as new

Condition: used, Year of construction: 1987, machine/vehicle number: 10064, functionality: fully functional, operating hours: 90,041 h, input voltage: 380 V, type of input current: three-phase, pressing force: 200 t, stroke length: 300 mm, table width: 800 mm, table length: 1,290 mm, table height: 1,000 mm, ram plate width: 800 mm, ram plate length: 1,300 mm, oil tank capacity: 1,300 l, total length: 2,330 mm, total width: 1,600 mm, total height: 4,150 mm, overall weight: 21,000 kg, control cabinet height: 2,070 mm, control cabinet length: 1,500 mm, control cabinet width: 400 mm, DGUV certified until: 06/2026, die cushion stroke: 70 mm, distance between side stands: 420 mm, installation height: 600 mm, Equipment: safety light barrier, 1x tool safety input Two-hand control panel with emergency stop 8x hydraulic clamps Electrically adjustable depth stop Cut stroke damping Ejector - draw cushion for ram and press table Electronic stroke and pressure measurement system Hydraulic main drive pump completely overhauled with a new drive motor Itjdpfoyvgrhox Ai Rek

Year of construction: 2001, condition: ready for operation (used), functionality: fully functional, punching force: 1,000 t, operating speed: 93 mm/s, stroke length: 55 mm, table length: 1,100 mm, table width: 800 mm, machine/vehicle number: 100597, TECHNICAL DETAILS Press force: 10,000 kN Table surface (W x D): 1,100 x 800 mm Stroke range: 15 - 55 mm Clearance at max. stroke: 28 - 98 mm Puzzle thickness: up to 3 mm Format width (max.): 1,100 mm Punching speeds Upwards: 47.8 mm/s Downwards: 93.7 mm/s Punching: 0.28 mm/s Hydraulic unit Type: 250 Dimensions (L x W): 1,310 x 910 mm Oil capacity: 670 l Unit weight: 1,000 kg Oil weight: approx. 550 kg Weight with oil fill: approx. 1,550 kg Automatic punching table Iedpfx Aijy Ampde Retk Type: 355 Table top size (W x D x thickness): 1,000 x 700 x 10 mm Hardness: 62 HRC Surface finish: 7 MACHINE DETAILS Electrics Operating voltage: 400 V Frequency: 50 Hz Rated machine current: 50 A Incoming line protection: 63 A Control voltage: 230/24 V Rated power: approx. 30 kW Protection class: IP 54 Power requirement: approx. 8 kW Pneumatics Operating pressure: 6 bar Dimensions & Weight Puzzle disassembler dimensions (L x W x H): 3,150 x 1,620 x 2,900 mm Working height: approx. 1,700 mm Total weight: 33,000 kg Weight of puzzle disassembler: approx. 1.8 t Noise level: < 70 dB(A)

Condition: excellent (used), Year of construction: 1960, pressure 25 t weight of the machine ca. 25 t Itodeyrtwfspfx Ai Rjk

Condition: good (used), Code: 0158 Brand: ITALPRESSE Model: LOCK FORM SYSTEM AIR - CE Standard Itsdepvk Dispfx Ai Rok Hydraulic air membrane press with loading and unloading - CE Standard 3-D coated on one face lamination of veneer to panels shaped or profiled on one face and flat on the other to produce cabinet door raised panels, drawer fronts, desk tops, table tops, kitchen tops, etc. 3-D lamination of plastic foils (PVC, PPE, ABS, Transfer foil ) to panels sheped or profiled on one face to produce: cabinet doors, drawer fronts, desk tops, table tops, kitchen tops, store fixture components, room doors, etc. Platen dimensions mm 2650 x 1250 Piece height mm 55 Pressure control manometer Automatic pressure reset Opening timer