Used Cooling Device for sale (17,529)

Condition: new, Measuring area: 75 - 88 mm Codpsd Efd Ijfx Ad Njgt

Condition: used, Dust suction hood 160 mm Cgjdjyi Ht Uepfx Ad Nst Motor output 1,5 kW Dimensions (L/W/H) 1.220 x 650 x 3.270 mm

Condition: like new (used), The Supfina 200 superfinishing device is an attachment for processing cylindrical shafts using stone finishing techniques. It is suitable for machining pre-ground or finely turned surfaces. The device performs an oscillating motion; workpiece infeed is realized via a pneumatic cylinder or via the lathe’s support. Its easy mounting on a lathe makes the Supfina 200 superfinishing device particularly suited for repair operations, single-part production, and small batch manufacturing. The device is very robust, making it well-suited for continuous and multi-shift operation. The oscillation stroke, infinitely adjustable between 0 and 5 mm, remains almost constant even under load. This allows grooving operations between shoulders to be carried out cleanly and without overlapping stroke, even with narrow reliefs (less than 1 mm). For economical machining, diameters from 1 to 300 mm are recommended for short workpieces. Cgjdpfeyvq Idsx Ad Net

Year of construction: 2023, operating hours: 2 h, condition: new, functionality: fully functional, For sale is an as-new spiral cooling tower made of stainless steel 304. As a precautionary measure, the basket was completely shot-blasted, and every single stainless steel component was pickled and then hand-polished. All screws and nuts have been replaced with new ones, all shafts have been replaced with stainless steel, and all ball bearings have also been replaced with stainless steel deep groove ball bearings. Replacement motors (drive for the basket and for the modular belt), as well as approximately 20 meters of modular belt, are included as spares. Csdpfx Asyvrvpjd Nogt Total modular belt width: approx. 340 mm, blue area width approx. 280 mm, outer side areas on the right and left made of stainless steel. Total belt length: 100 m. Number of tiers: 9. Spacing between each tier: 105 mm. Overall tower height: 2060 mm. Overall length incl. discharge belt: approx. 4000 mm; discharge section: approx. 2000 mm; total width: 2235 mm; running surface inner width: 370 mm; running surface outer width: 465 mm. Modular belt is made of stainless steel and POM. This spiral cooling tower also comes with a Z-belt. The Z-belt shown is for reference only and is not the original.

Condition: excellent (used), I offer a professional hydraulic rescue device from the renowned company LUKAS, model LSP 44 B. The equipment is used in rescue operations (e.g., fire brigade) and is distinguished by its very high build quality and reliability. Technical condition: The device is fully functional, tested, and ready for operation. Cedpfxsyxrbde Ad Nogt It shows normal signs of use as visible in the photographs. Technical specifications: Manufacturer: LUKAS / FAG Kugelfischer Model: LSP 44 B Type: DSH-20-2 Power supply: 230 / 240 V Motor: Leroy Somer, approx. 1.1 kW Country of origin: Germany Set includes: Hydraulic power unit Hydraulic hoses Hose reel Working element as shown in the photographs Application: Technical rescue Fire services Emergency services Hydraulic work

Condition: new, Year of construction: 2018, functionality: fully functional, overall weight: 91 kg, total length: 45 mm, total width: 60 mm, total height: 160 mm, type of input current: three-phase, 🔧 Device Description Professional cooling unit for control cabinets, designed for industrial applications. The unit provides stable operating conditions for electronics and automation systems, protecting them from overheating. The TopTherm series model is characterized by high cooling performance and reliability during continuous operation. ⚙️ Technical Data Power supply: 400 V / 50 Hz (3~) / 460 V / 60 Hz Cooling capacity (L35 L35): 400 V: approx. 3.95 kW 460 V: approx. 4.35 kW Sensible cooling capacity: up to 3.58 kW Power consumption: up to 2.0 kW Rated current: 4.2 A / 4.6 A Refrigerant: R134a (2995 g) Operating temperature range: 10°C – 55°C Degree of protection: IP54 (internal) / IP34 (external) Weight: approx. 91 kg 📦 Delivery Pallet shipping available Cjdpsyw Ndgefx Ad Nogt Personal collection also possible We assist in organizing international transport

Year of construction: 2011, condition: excellent (used), I sell the Stacking / Destacking device MEINERT (IMA Group) P620 E/S - 2500 / 1300 System, year 2011. Stacking device one side feeding / also suitable for pallets. Vacuum-System (including pump) Rotating head Automatic loading. Infeed table motorised roller-system Outfeed table with lifting mechanism motorised roller-system Outfeed table front roller-system Outfeed feeding station for stacked material Security fence system fully complete ! Working capacity apprx 16 tacts / min Material thickness 10 - 50mm Min. Material size 250 x 320 mm Max. Material size 1300 x 3000 mm Total area covered L.10.200mm x W.8700mm Total power 45kW Year 2011. Csdpsh Hp Dtefx Ad Nsgt Available immediately. Ready for work, possible to test. With CE Certificate and full manuals.

Condition: used, MIG / MAG Pulse Gas-Shielded Welding Machine FRONIUS Type TransPulsSynergic - TPS 330 Art. No.: 4.075 Serial No.: Year of manufacture approx. 2000 Output: 330 amps = 50% duty cycle (DC) 300 amps = 60% duty cycle (DC) 210 amps = 100% duty cycle (DC) Stepless adjustment range Open circuit voltage approx. 50 V Open circuit voltage approx. 30 V Power supply: 400 V, 50 Hz, 32 A plug - Digital display for voltage and amperage Cjdpfx Aeyv H Eled Negt - Pulse welding function - Various welding programs selectable Welding methods: MIG/MAG/TIG (programmed and manual modes) 2-stroke, 4-stroke, 4-stroke special, and spot welding - Welding control with program memory and disk drive for external program storage - Separate 4-roller wire feeder FRONIUS Type VR 152 with connecting hose package approx. 1.5 meters - 4-meter BINZEL hose package with central connection - External Fronius water cooling unit Type FK 71 - Welding gas pressure regulator - Supplied with 1.2 mm welding wire Space requirements (L x W x H): 900 x 660 x 1550 mm Weight: approx. 160 kg Good condition – fully functional – ready for demonstration

Condition: used, functionality: fully functional, type of input current: three-phase, cutting height (max.): 200 mm, Kuris KV2002 UVV Straight Knife Cutting Machine for Textile Manual Cutting Manufacturer: KURIS - KRAUSS & REICHERT Condition: Used, very good, all wear parts replaced with new ones! We are an authorized KURIS service partner and specialist dealer. The electric straight knife cutting machine, KURIS KV-2002 model, offered here is in excellent technical condition and fully operational. A comprehensive inspection has been carried out by our specialist workshop. This machine is already equipped with UVV safety protection. The UVV protection meets the latest safety regulations required in Germany. All necessary wear and spare parts have been freshly replaced. The manual cutting machine can be inspected and tested on site. Cutting height: approx. 200 mm Weight: approx. 15 kg Current new price: EUR 6,687.99 (gross) Connection: 400V 50Hz CEE-16A Power: 790W Cgjdpfx Adeyvgghe Net Shipping within Germany possible – PICKUP PREFERRED! Packaging and freight costs are borne by the buyer. These costs will be clarified on request/purchase according to current rates. NOTE on warranty/liability: This item comes from a business liquidation. Items confirmed as coming from a business closure can be inspected and, within the scope of possibilities, tested for functionality on site. The following applies: purchased as seen/inspected – under exclusion of any warranty or guarantee claims. The buyer accepts these terms with purchase. COMMERCIAL SALE: You will receive a proper invoice with VAT shown upon purchase. Subject to errors and prior sale.

Condition: as good as new (ex-display), Year of construction: 2024, Bath volume: 28 liters Inner tub dimensions: 500 x 290 x 200 mm Device external dimensions: 530 x 325 x 400 mm Csdpfxshma S Rs Ad Negt Weight: 20 kg Ultrasonic frequency: 38 kHz Ultrasonic power eff./max .: 400/800 watts Heating capacity: 1,200 watts Total power consumption: 1,600 watts Sweep: yes

Condition: used, Year of construction: 2001, liter capacity . l Cjdpfeyuy Tljx Ad Nogt feed pressure . bar coolant capacity . l

Year of construction: 2023, condition: ready for operation (used), Two vacuum lifting devices from Hegla and Bystronic for the glass industry are available. 1) Hegla Isofix LN6-D90-250, year of manufacture: 2023, load capacity: 250kg, suction cups: 6. 2) Bystronic, load capacity: 350kg, suction cups: 4. Documentation available. An on-site inspection is possible. Codpfxsyv H Hps Ad Njgt

Condition: used, • Type: DSH2/12V • Suction type: 150K • Year of manufacture: 2013 • Serial number: 84 • Suspension capacity: 900 kg vertical/horizontal • Each suction cup: 150 kg vertical/horizontal Codpfx Adeywi Dme Njgt • Can rotate and tilt

Year of construction: 2012, condition: ready for operation (used), An air-cooled monoblock water chiller Green Box for the plastics industry is available. Cooling capacity: approx. 20 injection molding machines, power: 25kW, refrigerant circuits: 2, refrigerant: R407C, cooling capacity: approx. 80kW, air flow rate: approx. 16500m³/h. Machine dimensions X/Y/Z: approx. 3300mm/1100mm/2100mm, weight: approx. 1300kg. Documentation available. An on-site inspection is possible. Cgedpfx Adjyvuunj Nst

Condition: good (used), functionality: fully functional, overall weight: 500 kg, total length: 1,200 mm, total width: 700 mm, total height: 900 mm, table length: 320 mm, table width: 320 mm, working length: 500 mm, LASEREVO G 05 JW Fiber Laser Marking Machine Cgsdpfxeyvrwao Ad Nst Note: The item must be collected between 12.05. and 22.05.2026 at an appointment to be agreed in advance. FCA D-74821 Mosbach – loaded onto truck

Year of construction: 2017, condition: ready for operation (used), Thermo Scientific Heraeus Multifuge X3R TX 750 Refrigerated Centrifuge 2017 No. 611 • Voltage: 230 V, 50/60 Hz • Power consumption: 10.5 A • Power input: 1950 W • Refrigerant: R404A, 0.52 kg (31 bar) • Max. kinetic energy: 62.5 kNm • Max. sample density: 1.2 g/cm³ • Operating temperature: -10 °C to +40 °C • Integrated cooling (refrigerated centrifuge) Dimensions: 670 × 750 × 360 mm (L × W × H) Weight: approx. 140 kg Cedsyvtyiopfx Ad Nogt Year of manufacture: 2017 You are welcome to arrange an on-site inspection. We are happy to organize an affordable shipping service for you! You will receive a proper invoice. For international customers, a net invoice can be issued, provided a valid VAT ID number is given. Subject to prior sale. Visit our shop and check out our other offers as well. All brand names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Technical data variations and errors in the description may occur and are subject to change.

Condition: good (used), Turning device, turning station, turning table, rotary station, rotary table, hydraulic press, workshop press, oil hydraulic press, workshop hydraulic press Codpfx Aed Tg Dcsd Nsgt -without: hydraulic unit (can be supplied at an extra cost) -Turning station for: rotating workpieces -Inner width: 1075 mm -Interior height: 720 mm -Transport dimensions: 2840/1600/H2300 mm -Weight: 969 kg

Year of construction: 2025, condition: new, - Panel width 710 mm - Backgauge - Adjustable stroke Cedeh Ramgspfx Ad Negt

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: DOCAT 70, We offer this used ozone generator and abatement device Tonello ECOFREE 2, year of manufacture 2018. Machine type: DOCAT 70 Power supply: 3Ph+GND Voltage and frequency: 400V-50Hz Compressed air pressure: bar Hydraulic pressure: bar Maximum steam pressure: bar Weight: 300 kg Drum volume: l Serial number: 07758 Year of manufacture: 2018 Installed power: 4 kW Codpfx Aoyvzznsd Negt Maximum peak current: 7 A Maximum operating current: 3 A Power cable cross section: 4 mm² If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 280 h, load capacity: 1,500 kg, lifting height: 6,600 mm, fuel type: electric, mast type: triplex, drive type: Elektro, Special equipment Load centre: 600 Mast type: Triplex Condition: As new Technical condition: Very good Description: Machine fully workshop-checked, cleaned, UVV and inspection newly carried out! Cjdpfxjyty E Ej Ad Nogt

Condition: new, Year of construction: 2026, NDS 2 • Aluminum profile construction • Adjustable angle/tilt Cgedswktn Aopfx Ad Nst • Length of inclined part: 1300 mm • Usable width: 350 mm • Loading length: 600 mm • Separating length: 800 mm • Minimum height (H min): 600 mm • Maximum height (H max): 1000 mm • Separator with blades included

Condition: new, Year of construction: 2026, Mill without screen Xtra2-A / 26.26 St Low-speed mill without screen, with two coarse crushers, compact and mobile on 4 wheels, 2 of which with brakes. The feed hopper and cutting chamber can be easily and completely opened via a hinge mechanism and quick lock, which allows for quick and easy cleaning. Shredder-type rotor with two primary coarse crushers, each with three crushing fingers, which also allow for the crushing of awkward and larger pieces of scrap. Control with contactor and electrically redundant safety limit switches. The control unit is integrated in a plastic housing, including a 4-meter connection cable and a CEE 16A/6h plug. Standard Z-hopper made of transparent polycarbonate (PC) sheet with a wide loading opening. Collection box for ground material with a capacity of 8 liters, includes a suction hose for connecting a pipe with a diameter of ND 38 or 40 mm. Technical data: • Motor power: 1.5 kW Codpfx Adjwktvgs Nogt • Power supply: 3 x 400 V, 50 Hz • Cutting chamber opening: 260 mm x 260 mm • Primary shredders: 2 pieces, each with 3 shredding fingers • Rotor speed: 32 rpm • Rotor: multi-tooth, 3 pieces • Static knives: 2 x 3 hardened knives • Cutting configuration: standard cutting module 4 mm (rotor tooth width); optional 5 mm

Condition: good (used), Year of construction: 2004, I sell the 3-axis CNC working centre Biesse Rover 24L with beam table, year 2004. Configuration: Csdpfoh Txlcex Ad Nogt 3-axis main spindle HSD recently full reconditioned / Water cooled RS1600 Tool magazine 7 positions ISO30 on working head 1 grooving saw X-direction Drilling head 14+4+2 spindles Useful working area 4500x1330mm. 2 working fields, 4 clamping areas Automatic central system of lubrication. Total power 35kW XDNC 2.01 software controller with full instructions. Pump Becker 250/300 m3/h. 5,5KW. Additional vacuum outputs for raster works or connection of additional clamping devices. Good condition. Available immediately. Repair needed: Handles on beam table, rotation of the ISO30 magazine on working head

Condition: like new (used), operating hours: 6,500 h, overall weight: 350 kg, As-new cooling system from PIOVAN. 38 kW cooling capacity. All relevant data can be found in the documents below! The unit comes from a very clean cleanroom production environment and was only used for tool sampling. Cgjdpfx Adjxf Tu Ne Net

Condition: used, Year of construction: 2006, functionality: fully functional, 2 compressed air dryers from Farrag are available for sale; further technical information available on request. Original price approx. €6,500. Cjdpfxsvkdkij Ad Njgt Model 1: SCARD 100 Model 2: SCARD 70 Year of manufacture: 2005 Power: 3.1 kW