Used Crown Wave for sale (1,095)

Condition: used, mileage: 39,785 km, power: 205 kW (278.72 HP), first registration: 03/2000, fuel type: diesel, empty load weight: 8,640 kg, maximum load weight: 4,860 kg, overall weight: 13,500 kg, tire size: 10R22.5, axle configuration: 4x4, wheelbase: 3,560 mm, color: red, driver cabin: other, gearing type: mechanical, emission class: euro2, suspension: steel, number of seats: 9, Equipment: ABS, additional headlights, all wheel drive, cabin, differential lock, fog lights, immobilizer system, low noise, power assisted steering, trailer coupling, Vehicle location: Bovenden, Doka, swivel seat, electric mirror, heated mirror, electric window left, electric window right, sun visor, switch 6, ABS (anti-lock braking system), constant throttle, power take-off, differential lock, fog lights, work lights, rotating beacon, stowage box, leaf suspension, towing device, noise alarm G1, roof hatch Wheelbase: 3560 mm Body: LF 16/12 fire engine with Schlingmann body, 1600 l water tank & Rosenbauer FPN 16/8 built-in pump Differential lock front and rear axle, 6.1 t front axle, rear axle H4 10.8 t crown wheel 410, ABS, PSM, engine brake with constant throttle, transmission oil cooling, auxiliary drive MB 61-10b flange M speed. In 11/2023 solenoid valve and clutch master cylinder incl. control unit renewed for approx. 4500,00€! Lasdpfevhnvwsx Ahash The sale to traders or export is plus 19% VAT! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: new, power: 350 kW (475.87 HP), fuel type: diesel, overall weight: 40,000 kg, tire size: 325/95R24, axle configuration: 6x4, wheelbase: 3,600 mm, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, suspension: steel, number of seats: 2, Equipment: ABS, air conditioning, cabin, central locking, cruise control, differential lock, fog lights, onboard computer, power assisted steering, seat heater, traction control, Vehicle location: Bovenden, StreamSpace, Mercedes PowerShift 3, long cab, 1x comfort seat, 1x sleeper berth, seat heating, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, electric roof, ABS (anti-lock braking system), traction control (ASR), constant throttle, PTO, differential lock, fog lights, leaf suspension, aluminum fuel tank, green environmental sticker. Wheelbase: 3600 mm, 8t front axle, rear axle planetary gear 16t, crown wheel 300, electronic braking system with ABS and ASR, ABS switchable, drum brakes on front and rear axle, stabilizer on front axle, condensate monitoring for compressed air system, electronic parking brake, smoker package, seatbelt monitoring, lower comfort bed, construction site dust filter, electric lifting roof, prep for upper comfort bed, reversing warning system, StreamSpace, light sensor, economy/power driving programs, Mercedes PowerShift 3, PowerShift Advanced, multimedia radio with touch display, classic dashboard, tank capacity: 320l + 480l, transmission oil cooling, LED daytime running lights, high performance engine brake, protection plate under bumper, cyclone pre-filter for coarse dust, Grounder, PTO MB 131-2c pump. Lasdpfjyrt Sijx Ahaoh Export only! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors excepted!

Condition: used, Year of construction: 1974, OVERVIEW Complete isobaric glass bottling and linear pressure-sensitive labelling line, capable of outputs up to 4,000 bottles per hour (bph). The line is specialized for carbonated beverages into 0.33 L long-neck glass bottles. The heart of the line (Schilpp filler) underwent a comprehensive engineering overhaul and complete reconditioning in 2019 by master specialist Petr Markl, updating its core mechanics, feed systems, and electronics to meet modern production safety standards. The line is paired with a modern 2019 Enos labelling machine. Due to a sudden company closure, this line is now available immediately in an immaculate, turnkey operational state. Technical Specifications Component 1: Isobaric Counter-Pressure Filler - Manufacturer: Schilpp (Germany) - Model: Contibloc 20/5 - Year of Manufacture: 1974 - Year of Complete Overhaul: 2019 (by Petr Markl) - Number of Filling Valves: 20 (Long tube design to drastically minimize foaming) - Number of Capping Heads: 5 (Crown cork) - Cap Size: 26 mm crown cap - Capacity: Up to 4,000 bph (depending on product temperature and CO2 volumes) - Processed Formats: 0.33 L long-neck glass bottles (custom nylon exchange stars included) - Operating Pressure: 8 bar - Outfeed: Integrated small discharge table directly synchronized with the labeller.   Ljdpfxsyr Nr So Ahasah Component 2: Linear Labelling Machine - Manufacturer: Enos Euro (Italy) - Model: C5000 - Year of Manufacture: 2019 - Capacity: Up to 5,000 containers/hour (depending on label dimensions) - Application: Self-adhesive labels (Body / Back) - Processed Formats: Bottles, cans, and cylindrical containers - Adjustments: Tool-free manual side-barrier system for ultra-fast format changeovers.   Reconditioning Details & Recent Upgrades (Markl 2019) During the 2019 general overhaul by Petr Markl, the filler was stripped down and updated with the following technical enhancements: - Product Handling: Custom nylon stars and guide blocks designed specifically for smooth 0.33 L long-neck bottle transport. - Filling Valves: Complete mechanical refurbishment and formatting of the 20 valves for precise 33cl dosing. - Automation Upgrades: High-speed electronic sensor/counter for accurate crown cap distribution control and dedicated rinse pump switch integration. - Safety Features: New clear front safety doors fitted with an active electromechanical "Open Door" emergency stop interlock system. - Mechanical Drive: Complete replacement of main drive transport chains and motor for seamless line speed synchronization.   Scope of Delivery - Isobaric Filling Machine: Schilpp | Contibloc 20/5 | 1974 (Overhauled 2019). - Labelling Machine: Enos Euro | C5000 | 2019. - Accessories Included: Integrated conveyors, localized product sensors, safety guards, and direct coupling outfeed table.

Condition: used, mileage: 427,470 km, power: 115 kW (156.36 HP), first registration: 10/2009, fuel type: diesel, empty load weight: 5,800 kg, maximum load weight: 1,690 kg, overall weight: 7,490 kg, tire size: 215/75R17.5, axle configuration: 4x2, wheelbase: 3,620 mm, color: white, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel-air, number of seats: 2, loading space length: 4,950 mm, loading space width: 2,450 mm, loading space height: 2,240 mm, Equipment: ABS, cabin, differential lock, fog lights, immobilizer system, low noise, onboard computer, power assisted steering, seat heater, tail-lift, Vehicle location: Bovenden, Kz. Haus, 1x comfort seat, heated seats, electric mirrors, heated mirrors, switch 6, ABS (anti-lock braking system), constant throttle, frame paneling, differential lock, fog lights, leaf air suspension, low noise G1, U-protection, roof hatch, aluminum tail lift, standing, diesel/electric cooling unit, green environmental badge Wheelbase: 3620 mm Structure: refrigerated box with side door on the right, ThermoKing T 800 R cooling unit (electric/diesel), partition wall and 1t tail lift MBB 1000K 3.5t front axle, rear axle H2 6.2/7.2t crown gear 325, Telligent braking system with ABS, disc brakes on front and rear axles, stabilizer rear axle, distributor cockpit, pollen filter, on-board diagnostics 2, engine start/stop system. ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors! Ledpfxoyniv As Ahasah - .

Condition: new, neu ca. 14 - 16 Wochen ab Auf Türkei 252800 € 600 to 4050 mm Ledpfx Aoynmxnohajah Y1 / Y2 / X und R Achse 365 mm 3100 mm 410 mm 700 mm hydraulisch 160 mm/s 10 mm/s 160 mm/s 650 mm 500 mm/s 250 mm 900 mm 154 mm 280 l 5750 mm 2500 mm 4000 mm 40500 kg 1 SERVO MOTOR AND PUMP PER CYLINDER 4 axes (Y1, Y2,X andR) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5“ in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet interfaces for import, backup and programm transportation - OS: Windows - IGES, STEP, DXF files import servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules oilfilling users manual in English or German ADVANTAGES OF THIS CONCEPT: - hydraulic works only while upper beam movement - low energy consumption - low noise level - high speed PRICE FCA TURKEY optional equipment: CNC Control Delem DA-66 S CNC control Delem DA-69S 3D incl. PC software Profile-S with 3D file import option

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 159300 € 3010.77 € 320 to 4050 mm Y1 / Y2 / X und R Achse 365 mm 3600 mm 410 mm 630 mm hydraulisch 160 mm/s 10 mm/s 160 mm/s 650 mm 500 mm/s 250 mm 900 mm 154 mm 5300 mm 1910 mm 3230 mm 20100 kg 1 SERVO MOTOR AND PUMP PER CYLINDER 4 axes (Y1, Y2,X andR) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5“ in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility Lasdsynm Atspfx Ahaoh - USB and Ethernet interfaces for import, backup and programm transportation - OS: Windows - IGES, STEP, DXF files import servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules oilfilling users manual in English or German ADVANTAGES OF THIS CONCEPT: - hydraulic works only while upper beam movement - low energy consumption - low noise level - high speed optional equipment: Z1/Z2-axes CNC Control Delem DA-66 S CNC control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option

Condition: like new (used), Year of construction: 2021, Machine data: TD 150 – 6.4 m S5 with DFT® technology Working length: 6400 mm Insertion depth: 1250 mm Width of bending jaws: 10 mm + 10 mm additional bar Maximum bending capacity: S = 20 mm, 1.50 mm steel sheet (Re 275 N/mm²) Capacity for 180° bending: 50% of the maximum bending capacity Maximum bending angle: 143° (1.0 mm 135° / 1.5 mm 130°) Bending accuracy: +/- 0.5° (using crowning) Number of clamps / clamp stroke: 7 units / 15 mm - 1250 mm Maximum clamp opening: 35 mm Conical backgauge with adjustable depth: multi-zone function Number of backgauge fingers / stroke: 7 units / 5 mm - 1150 mm Backgauge tolerance range: +/- 0.1 mm per repeatability set Electrical voltage: 400 V / 50 Hz / 3 phases + PE Rated current / protection / pump: 32 A / 63 A / 22 kW, 75 ccm Ljdpjzzxb Hefx Ahasah Dimensions / weight: 8050 x 2250 x 2100 mm / approx. 10,000 kg

Condition: like new (used), Year of construction: 2023, Technical data: Double bending machine Working length: 8200 mm Bending capacity: 2.5 mm Lsdpfjzz Adfjx Ahajah CNC control Sheet metal cutting device Back gauge depth: 1250 mm Bending accuracy: +/- 0.5° Bending range: 140° Multi-zone crowning system Bending die width: 10/20 mm Number of gripper fingers: 9 pcs. CE marking Dimensions (length x width x height): approx. 10200 x 2300 x 2150 mm Weight: approx. 12.5 tons Accessories: Sheet metal cutting device Hydraulic unit with oil cooler Bending die lighting Various tools The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty. Condition: overall in new condition

Condition: ready for operation (used), Year of construction: 2023, number of axes: 3, overall weight: 14,750 kg, total width: 1,770 mm, total height: 3,000 mm, pressing force: 224 t, product length (max.): 5,250 mm, This 3-axis Durma AD-S 40220 press brake was manufactured in 2023. It features a pressing force of 220 metric tons and a bending length of 4050 mm. The machine is equipped with a servo-motor-driven backgauge system and a CNC control unit with a 15" touchscreen. If you are looking to get high-quality bending capabilities, consider the Durma AD-S 40220 press brake we have for sale. Contact us for further details. - Pressing Force: 220 metric tons- Distance Between Columns: 3600 mm- Bending Stroke: 265 mm- Installation Height: 530 mm- Side Column Overhang: 450 mm- Controlled Axes: 3 axes (Y1, Y2, X)- CNC Control Unit: DT-15 CNC CONTROL (15" 2D graphic display, touchscreen, USB ports, PC software, graphical product/tool memory)- Backgauge Drive System: Servo-motor-driven backgauge on linear guides and ball screws- Backgauge Finger Blocks: Double linear guides- Backgauge X-axis Speed: 500 mm/s- Backgauge R-axis Speed: 350 mm/s- Backgauge R-axis Travel: 250 mm- Axis Position Accuracy: 0.01 mm- Y-axis Rapid Traverse: 160 mm/s- Y-axis Working Speed: 10 mm/s- Y-axis Retraction Speed: 140 mm/s- Hydraulic Drive System: Yes- Main Motor Power: 22 kW- Operating Voltage: 400 V- Control Voltage: 24 V- Main Fuse Current / Rated Current: 100 A- Frequency: 50 Hz- Short Circuit Breaking Capacity: 10 kA- Oil Tank Capacity: 250 L- Table Height: 900 mm- Table Width: 104 mm- Safety System: Fiessler AKAS laser safety device mounted on the upper beam- Crowning: CNC-controlled crowning- Upper Tooling: Upper die 1010/A/75°, split and offset- Lower Tooling: 4-V die block 60x60 2009 (V = 16, 22, 35, and 50 mm)- Support Arms: Sheet metal support arms on linear guides- Compliance: CE compliant Technical Specification Lodpfx Ahjz D Dhnjajah Bending Length 4050 mm

Condition: used, Year of construction: 2015, Overview Traditional-method finishing line for cava, champagne and other sparkling wines, from riddling and neck freezing through disgorging, dosing, corking and wire hooding to capsuling, labelling and case sealing. The machines are rated between 1,800 and 2,500 bottles/h. Two stainless steel tanks complete the offer. The line is sold as a whole; the gyropalettes and the two tanks are also available separately. Technical data - Product: sparkling wine, traditional method (cava, champagne) - Capacity: 1,800 to 2,500 bottles/h depending on the machine - Bottle formats: Bordeaux and Burgundy/cava - Years of manufacture: 1987 to 2018 - Electrical supply: 380-400 V, 50 Hz Scope of Delivery - Gyropalettes | ADRESSES INDUSTRIE | 504 S | for 504-bottle metal cages or 500-bottle packs, approx. 6,000 bottles per batch, control cabinet | 1998 - Balancer manipulator | DALMEC | PARTNER PMC | pneumatic, max. load 80 kg, bottle gripper head, unloads the cages into the neck freezer | 2005 - Neck freezer | TALLERES URPINAS | G+20 B | glycol/brine bath at -25 °C, touch panel, 2.28 kW, 380 V, 2,000 bottles/h | 2005 - Disgorging and dosing monobloc | PERRIER | crown cap removal, ice plug ejection, expedition liqueur dosing and levelling, approx. 50,000 bottles since the last general overhaul, original manual, 2,500 bottles/h | 1987 - Corker | AROL | GEMINI F | natural cork (mushroom) corking, single head | 2015 - Wire hooder | Robino & Galandrino | VITTORIA T 1/1 JUNIOR | monobloc with the corker, wire hood plaque feeder, inclined long-duration wire hood magazine, touch panel, 400 V, 50 Hz, original manual, 2,000 bottles/h; cork feeding and sorting hopper available as an option | 2015 - Bottle turner / homogeniser | FORNS | continuous, mixes the expedition liqueur into the wine, 2,500 bottles/h | 1987 - Washing, drying and blowing tunnel | CAMES | WDT-1 | exterior washing, high-speed Sonic air knives, 400 V, 50 Hz, 700 kg | 2018 - Capsule applicator | C.M.A.R. | capsule distributor with pleating and smoothing heads | 2001 Ljdpfxoz E U D Nj Ahasah - Labelling machine | PRIMA INDUSTRIES | PLM 1500 | self-adhesive, 3 label stations plus neck collar, capsule orientation with spot and UV sensors, SICK photocells, star wheels for 75 mm (Bordeaux) and 89 mm (Burgundy/cava) bottles, 3 kW, 400 V, 1,800 bottles/h | 2018 - Case sealer | SIAT | SK2-S | top and bottom adhesive tape sealing, 380 V, 3-phase | 2015 - Tank with agitator | DECALSA INDUSTRIAL | 12,200 L, agitator, heating and cooling coils, control box | 1988 - Tank | MAGUSA | DPG | 10,000 L, AISI 304 | 2000 Condition Used, still installed and in production. Regularly maintained; most machines have had one owner since new. Availability Available now. Inspection possible. Location: Spain.

Condition: reconditioned (used), - Table dimensions: 1,250 mm x 2,500 mm - Table positions: 4 - Table rotation via a toothed crown gear (HIRT type) - Maximum load capacity: 2,000 kg - Equipped with a hydraulic unit - Height from base to table: 530 mm Ljdpfx Ahszx Sd Ajaoah - Overall height: 700 mm

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, stroke length: 200 mm, pressing force: 100 t, Equipment: CE marking, safety light barrier, For Sale: Bystronic Xact 100 CNC Press Brake (3.1m x 100T) Available immediately: A exceptionally clean, well-maintained Bystronic Xact 100 CNC Press Brake (2012 Model). This free-standing, down-stroking machine offers precision 4-axis bending with automated crowning, making it an excellent addition to any precision fabrication facility. Detailed technical specifications and machine configurations can be verified through the Bystronic Official Group Website. Machine Overview & Configuration Control system: Equipped with a Cybelec DNC 880S Control unit. Axis configuration: 4-Axis control plus crowning (Y1, Y2, X, R + Manual Z). Safety systems: Integrated Fiessler Laser Guards for optimal operator protection. Guarding package: Features full rear sliding screen guards and side guards. Wandering foot pedal/pedestal controls. Technical Specifications Parameter Measurement Bending Capacity1000 kN (100 Tonne) Laedszta A Aspfx Ahaeh Working Length3100 mm Distance Between Frames2550 mm Throat Depth400 mm Maximum Stroke200 mm Rapid Approach Speed100 mm/s Working Speed1 – 10 mm/s Return Speed95 mm/s Overall Weight9000 kg Machine Identity Manufacturer: Bystronic Model: Xact 100Year of Manufacture: 2012 (Model Year 2012)

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: J2KN-14043, Equipment: documentation/manual, The analyzer is in very good condition and has not been used since its last certification in 2024. It comes with a complete package, including numerous accessories and options. Lajdpfozy Skxex Ahaeh Robust and comprehensive: The analyzer is housed in its aluminum case, making it compact, easy to carry, robust, and complete. It is equipped with a metal condensation pot with an integrated PELTIER cooler, a dust filter, and automatic condensate drainage via a purge valve. Its aluminum chassis is guaranteed for 10 years. For over 20 years, our customers have praised this type of analyzer! Easy to use: The power supply is integrated into the housing. The long-life cells (up to 6 years in normal use) offer fast response times. You can replace the cells yourself. The ECOM JKNP.expert automatically prints the combustion and emissions analysis report. The report can directly display values in ppm, as well as a second unit, such as mg/m3, referenced to a % of O2. Expandable: It can accommodate up to 6 electrochemical cells. At any time, you can add measurements for SO2, CO%, etc. For long-term measurements: The ECOM JKNP.expert is designed to measure medium and large-capacity boilers equipped with modern, modulating burners for extended periods. Control unit for added convenience: The control unit displays the measurements transmitted to it by the analyzer via radio waves. The measurements remain fast, and the display can be magnetically attached near the burner. CO cell purging with a second pump: In case of poor combustion during the adjustment of a fuel or gas burner, a purging pump automatically limits the over-concentration of CO in the CO cell. The purging system is automatic (starting from 4000 ppm, adjustable) or manual. Work without interruption, in complete peace of mind.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2023, operating hours: 2,216 h, machine/vehicle number: 7.376.230.761, controller model: Durma DT-15, working width: 4,050 mm, stroke length: 365 mm, throat depth: 630 mm, pressing force: 400 t, TECHNICAL DETAILS Press force: 400 t Max. working width: 4,050 mm Frame spacing: 3,400 mm Overhang: 630 mm Max. stroke: 365 mm Crowning system: CNC-controlled Ram holder: Quick-release system Tool holder type: European style MACHINE DETAILS Drive system: CNC Control system: Durma DT-15 Number of axes: 4 (Y1 + Y2 + X + R) Dimensions & Weight Dimensions (L x W x H): 5,750 x 2,110 x 3,640 mm Weight: 27,760 kg Lajdpfxozzbafj Ahaeh Transport packages: 1 Operating hours: 2,216 h EQUIPMENT Tools Finger guard CE marking CE certificate Documentation Tools

Condition: good (used), mileage: 378,757 km, power: 175 kW (237.93 HP), first registration: 03/2012, fuel type: diesel, axle configuration: 4x2, fuel: diesel, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel-air, loading space length: 6,360 mm, loading space width: 2,480 mm, loading space height: 2,360 mm, Year of construction: 2012, Equipment: AdBlue, Bluetooth, EBS, air conditioning, cruise control, electric window regulation, electronic stability program (ESP), fog lights, power mirror, soot filter, tail-lift, = Additional Options and Accessories = - Brake booster - EPS (Electronic Power Steering) - Particulate filter - Radio/CD player - Side door = Further Information = Front axle: Steered; Suspension: Leaf spring Rear axle: Suspension: Air suspension Unladen weight: 8,340 kg Payload: 5,160 kg GVW (Gross Vehicle Weight): 13,500 kg Technical condition: good Optical condition: good Reference number: 21 Vehicle number: 21 Mercedes Benz Atego 1324 / Carrier Supra 850 / Euro 5 / Tail lift .: Automatic Suspension: Leaf / Air Transmission: WDB9702651L640494 Air conditioning Engine brake EURO 5 - AdBlue Wheelbase: 4760 mm Tail lift Refrigeration unit Brand: CARRIER Type: Supra 850 Refrigeration engine: Diesel Internal dimensions: Length: 6.36 m Width: 2.48 m Height: 2.36 m Special equipment: Audio system: CD radio, electric windows, graphic information display with eco-meter, hydraulic steering gear LS 6 / LS 8, fuel tank: 180 liters plastic, splash guards rear fenders, steel rims 7.50x19.5 Additional equipment: Emission standard EURO 5, axle configuration: 4x2, exterior mirrors electrically adjustable and heated, battery 115 Ah, cockpit distributor, roof hatch (steel), cab: S (short), suspension: leaf / air, generator 80 A, transmission 6-speed - type: G 60-6, urea tank (AdBlue): 25 liters, urea tank (AdBlue): plastic, rear axle H 4, crown wheel 368, interior filter: pollen filter, body/superstructure: chassis, model update Atego 2, engine 6.4 liters - 175 kW Diesel (OM 906 LA), engine start/stop system, engine brake with constant throttle, wheelbase 4160 mm, disc brakes, side impact protection, seats in the cab: passenger single seat, fixed, seats in the cab: driver's seat standard suspension seat, stabilizer rear axle, underrun protection rear fixed, underrun protection front, immobilizer, permissible total weight 13.50 t No liability for printing and typographical errors, changes, prior sale and errors reserved! = Company Information = No liability for printing and typographical errors, changes, prior sale and errors reserved! Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Lasdpfozuthuex Ahajh Mobile: Ms. Sabine Faust Email:

Condition: new, functionality: fully functional, Year of construction: 2026, oil tank capacity: 90 l, overall weight: 1,500 kg, total length: 1,630 mm, total width: 1,020 mm, total height: 1,950 mm, power: 3 kW (4.08 HP), input voltage: 400 V, pressing force: 40 t, type of input current: three-phase, Equipment: CE marking, documentation/manual, safety light barrier, OFFER OF THE WEEK! MTP HYDRAULIC CNC PRESS BRAKE 1320 MM / 40 T 2-AXIS X + Y – TOUCHSCREEN CONTROL Metal Technics Polska is a manufacturer and importer of professional CNC machines, laser systems and metalworking equipment. For 15 years, we have supplied reliable technologies to companies across Europe. The MTP 1320/40 hydraulic CNC press brake is a compact and efficient machine designed for accurate and repeatable sheet-metal bending. With a pressing force of 40 tonnes and a working length of 1320 mm, it is ideal for workshops and production companies looking for a practical and easy-to-operate bending solution. MTP-3212 TOUCHSCREEN CONTROL The machine is equipped with the MTP-3212 touchscreen controller and 2 controlled axes: • Y axis – ram movement / bending depth • X axis – rear back-gauge positioning Controller functions include: • Touchscreen interface Ljdjyr N E Espfx Ahaoah • Programming of bending operations • Storage of bending programs • Manual programming • Tool parameter management • SD card memory • X-axis back-gauge positioning • Y-axis bending-depth control AMADA-PROMECAM STYLE TOOL CLAMPING The machine is equipped with an AMADA-Promecam-style manual upper tool-clamping system, allowing convenient replacement and positioning of the segmented upper tooling. SAFETY EQUIPMENT • Side safety guards • Front safety light curtains • Secured rear working area • Emergency stop system • Automatic stop when the protected safety zone is breached TECHNICAL DATA • Nominal force: 400 kN / 40 t • Working length: 1320 mm • Controlled axes: X + Y (2 axes) • Distance between columns: 900 mm • Throat depth: 180 mm • Ram stroke: 100 mm • Maximum daylight: 290 mm • Back-gauge range: 500 mm • Approach speed: 80 mm/s • Working speed: 9 mm/s • Return speed: 80 mm/s • Main motor power: 3 kW • Dimensions: 1630 × 1020 × 1950 mm (L × W × H) • Weight: 1500 kg • Controller: MTP-3212 touchscreen • Tool clamping: AMADA-Promecam style • Crowning / compensation system: Not equipped The MTP 1320/40 combines compact dimensions, simple touchscreen operation and reliable hydraulic technology. The X + Y axis configuration provides automatic back-gauge positioning and control of the bending depth, making the machine suitable for individual jobs as well as repeat production. DELIVERY Delivery can be arranged throughout Europe and beyond. Transport costs are calculated individually according to destination. Please provide your delivery address or postal code to receive a transport quotation.

Year of construction: 2005, condition: ready for operation (used), overall weight: 9,500 kg, total width: 1,700 mm, total height: 2,300 mm, pressing force: 102 t, product length (max.): 3,800 mm, number of axes: 8, CNC Hydraulic Press Brake manufactured in 2005. This GASPARINI X-Press 100 features a press force of 100 t and a bending length of 3,100 mm. It is equipped with a Delem DA60 control and a dynamic hydraulic crowning system for enhanced precision. If you are looking to get high-quality bending capabilities, consider the GASPARINI X-Press 100 machine we have for sale. Contact us for further details regarding this machine. • Ram stroke: 300 mm • Tool clamping: Promotec pneumatic system Lasdpfx Aszypi Ejhaoh • Hydraulic crowning: Dynamic hydraulic crowning of the lower table • Axes: Y1, Y2, X, R, Z1, Z2, X1, X2 (8 axes) • Oil seals: Replaced • Oil: New • Warranty: Included • Condition: Machine guaranteed / ready for sale Technical Specification Bending Length 3100 mm

Condition: new, neu ca. 2 Wochen ab Auftragse Türkei 153986 € 1867.32 € 98800 € 320 to 3050 mm 365 mm 2600 mm 750 mm 630 mm hydraulisch 160 mm/s 10 mm/s 140 mm/s 500 mm/s 350 mm/s 37 kW SPECIAL PRICE FOR STOCK MACHINE EXW TÜRKIYE Tandem preparation Projection 750 mm Light barrier for single or later tandam operation 6 axis back gauge X1, X2, R1, R2, Z1, Z2 CNC CONTROL SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5“ in full HD - with 2D and 3D working screen - direct programming of the bending angle Lodpfoz Ihypjx Ahaoah - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet interfaces for import, backup and programm transportation - OS: Windows - IGES, STEP, DXF files import servo motorized back gauge on linear guides and ball screws CNC crowning table upper tool 1010/A /75°/0.8/105, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) linear guided sheet support arms according to CE rules oilfilling users manual in English or German ADVANTAGES OF AD-S COMPAIRED TO PBF: - more stroke, installation height and throat - higher approach and retraction speed of the top beam - higher backgauge speed - backgauge finger on double instead of single linear guide - more options available such as: additional backgauge axes (e.g. Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measuring system, tandem design, other CNC controls ...

Condition: repair required (used), Year of construction: 2019, controller model: Delem DA-66T, working width: 3,050 mm, number of axes: 6, overall weight: 12,620 kg, pressing force: 220 t, The press brake cannot be aligned because the X and R axes are blocked. This is a machine that is to be repaired or is intended for a project. TECHNICAL DETAILS Number of axes: 6 Axes: Y1 + Y2 + X + R + Z1 + Z2 Press force: 220 t Max. working width: 3,050 mm Frame spacing: 2,500 mm Crowning system: CNC-controlled Ram holder: hydraulic Tool holder type: WILA standard MACHINE DETAILS Drive: CNC Laodpfx Ahozuw Ewsash Control: Delem DA-66T Power: 22 kW Dimensions & Weight Dimensions (L x W x H): 3,750 x 1,900 x 2,900 mm Weight: 12,620 kg Transport packages: 1 EQUIPMENT Tools

Condition: used, Roundo PS340 3000 mm Hydraulic Double-Pinch Plate Bending Rolls Manufacturer: Roundo AB Model: PS340 Year: 1983 Country of manufacture: Sweden Type: Hydraulic three-roll double-pinch plate bending rolls Capacity Maximum working length: 3,000 mm Pre-bending capacity: approximately 12 mm mild steel aximum rolling capacity: approximately 18–23 mm mild steel, depending upon finished diameter Standard upper-roll diameter: 340 mm Plate capacities based upon mild steel of approximately 270 N/mm² yield strength Minimum rolling diameter: approximately 1.1–1.4 times the upper-roll diameter, depending upon material thickness Remaining straight edge after pre-bending: approximately 1.5–2 times plate thickness Features Lajdpfx Ahezuzpyjaoh Hydraulic double-pinch design Both lower rolls independently hydraulically adjustable Pre-bending of both ends without removing and reversing the plate Hydraulic rotation of all three rolls Infinitely variable rolling speed Hydraulic powered drop end Portable pendant control Front safety trip bar Heavy-duty fabricated and stress-relieved frame Forged and crowned steel rolls Rolls mounted in heavy-duty roller bearings Suitable for cylindrical and conical bending Approximate machine weight: 14,000–15,000 kg, subject to confirmation Approximate main motor: 22 kW, subject to data-plate confirmation

Condition: used, mileage: 38,489 km, power: 175 kW (237.93 HP), color: black, gearing type: automatic, total length: 78,500 mm, total width: 25,500 mm, total height: 36,500 mm, loading space length: 60,600 mm, loading space width: 24,800 mm, loading space height: 24,500 mm, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, power assisted steering, - Air suspension, rear - Air suspension, front Lodpfxeztlrco Ahaeah For inquiries regarding the vehicle, please contact Mr. Seidel (at tel. Mercedes-Benz Atego 824 L platform/tarpaulin + tail lift 6-cylinder engine! Tail lift: BÄR BC 1000 S4-A4 (1,000 kg), A1M front axle, 4.1 t, A2B rear axle, crown wheel 325, hypoid, 6.2 t, A2Z rear axle differential lock, A5S axle ratio i = 3.636, B1B electronic braking system with ABS and ASR, B1D electronic compressed air supply unit, medium, B1F heater, electronic compressed air supply unit, B2A disc brake, on front and rear axles, B4A condensate monitoring, for compressed air system, B5B trailer brake, 2-line system, C2J wheelbase 4220 mm, C5I fastening parts, for platform, C6B steering ZF 8095, C6S stabilizer, for extreme high load, rear axle, C7E front underrun protection (ECE), steel, C7M protection device, lateral, weight-optimized, C8J splash guard, in the fender, C9L extended frame overhang, 200 mm, C9Y omission of rear underrun protection (ECE), D1B driver's air-suspended seat, standard, D1M co-driver's fixed seat, simple, D1Z center seat, with 3-point safety belt, D3X seat cover, plain weave fabric, D4A standard cockpit, D4W window lift, electric, on both sides, D4Y sun visor, lateral, driver's side, D6F air conditioning, D6Y pollen filter, D7A additional thermal insulation, D7L storage compartment, above the windshield, 1 compartment, D8A roof hatch/ventilation flap, roof, E0E batteries from Banner, E0Y battery cover, E1H batteries, 2 x 12 V/165 Ah, maintenance-free, E1N generator 28 V/100 A, E2J fuse box, E3F additional socket 12 V/15 A, railing, E4B interface, fleet management system FMS, E5A switch no. 1 for external superstructure electrical system, E6A trailer socket 24 V, 15-pin, E6Y reversing warning, combined with hazard warning lights, E7F cable remote control for air suspension, E9H preparation for tail lift control, F1X S-cab ClassicSpace, 2.30 m, tunnel, F5L exterior sun visor, transparent, F6I front mirror, heated, F6J main mirror, electric, driver's side, F7V cab entry, two-step, F8L immobilizer, with transponder, F8X rain/light sensor, G0U economy driving program, G1D gearbox G 90-6/6.70-0.73, G5G Mercedes PowerShift 3, I0I tires tubeless, 235/75 R 17.5 front axle, I4A wheel formula 4x2, I6X air suspension, rear axle, J1A combination instrument, 10.4 cm, J1O digital tachograph, 2nd generation, ADR, J1S tachograph manufacturer VDO, J2K loudspeaker, 2-way system, J3N Fleetboard Eco Support, J5S radio, with USB connection and Bluetooth, J9D preparation for toll collection, J9N preparation for Truck Data Center 6 (DTCO), K0E plastic tank 120 l, left, K3T AdBlue tank 25 l, K5S protective cap for AdBlue dosing system, K7I exhaust system, on the frame on the right, tailpipe pointing inwards, L1B daytime running light, L1H fog lights, halogen, M0S noise encapsulation, according to ECE, M2A engine OM936, R6, 7.7 l, 175 kW (238 hp), 1000 Nm, M5C engine version Euro VI, D, M5V High Performance Engine Brake, M8Z fuel preheating, P0L tail lift preparation, Atego, Q1D front spring 4.0 t, parabolic, Q7B trailer coupling Ringfeder, Q7R trailer coupling G 135, for ZAA, Q8Y cross member, later installation of AHK G135 ZAA, R0Z wheel nut cover, R1B steep shoulder rims 6.75 x 17.5, S1D stability control assistant (ESP), S1H lane keeping assist, S1P Active Brake Assist, S5Z cruise control, T0J weight variant 7.49 t (3.8/5.0), X2T maintenance documentation, Z4E in-line engine, 6 cylinders, Z5C OM 936, cargo space

Condition: good (used), Electric coil feed, straightening and cut-to-length machine – in top condition – ready for immediate use – retains its value. Ljdpfx Asz Ezbbshajah For sale is a coil feed and sheet metal straightening machine with 6 adjustable straightening rollers. You can use this machine to roll strip metal up to 1.5m x 2mm thick into sheets without any waves, or simply to straighten heavy coil packs. You enter the desired length, the machine feeds out the strip metal and cuts it. The machine is ideal for facade builders and sheet metal workers who value sheet metal that is free of waves. A special feature of this machine is that it has six straightening rollers; most machines work with three or a maximum of four rollers. The machine is in very good technical and visual condition. Dimensions: 2.2m x 1.4m x 1.4m, weight: 2 tons. Includes loading. Sale: • Machine price (net) • You will receive a proper invoice with VAT shown. • Shipping or forwarding is possible (upon request) • Inspection possible by appointment Please note: If interested, please contact us by phone. Phone:

Condition: excellent (used), Technical specifications: Working length: 4100 mm Frame width: 3650 mm Press force: 220 tons CNC control: OPERATOR OPII graphic Color screen size: 14" Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Motor-adjustable back gauge Overhang: 300 mm Stroke: 180 mm Automatic crowning Motor power: 17 kW Dimensions (length x width x height): approx. 4800 x 2300 x 2900 mm Weight: approx. 17 tons Accessories: New AMADA tools Laodpez E A Suefx Ahaoh Condition: The machine is in very good overall condition. Retrofit in January 2026. The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.

Condition: used, functionality: fully functional, Year of construction: 1981, Motorized Swivel Bending Machine Manufacturer: KRAMER, Type: AMaut III 3000 x 2 mm Completely overhauled in 1981 Technical Data Manufacturer: KRAMER Type: AMaut III 3000 Year of Manufacture: Completely overhauled in 1981 Usable Length: 3000 mm Sheet Thickness: 2 mm Stroke: Dimensions: approx. L x W x H 4.2 x 0.90 x 1.5 m Ledpfx Ahjz Eg Aqeasah Equipment • Bending angle adjustment via potentiometer! • Manually adjustable crowning • Documentation All information is without guarantee. A demonstration is possible at any time in our showroom.

Condition: new, pressure 320 t chamfer lenght 4100 mm distance between columns 3600 mm column arm 410 mm ram stroke speed 140 mm/sec work speed 10.5 mm/sec return speed 150 mm/sec work stroke 375 mm dayligth 650 mm table height 900 mm table width 220 mm oil volume 400 ltr. Lasdpjxaba Nefx Ahash voltage 400 Volt total power requirement 30.0 kW weight 22064 kg Dimensions (HxWxD) 5350 x 2450 x 3150 mm ----- HIGH-SPEED hydraulic press brake with increased installation height increased cylinder stroke enlarged projection ----- Furnishing: - DELEM CNC control model DA 66T - swiveling touchscreen control unit - 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 + Z2 - split upper deer foot tool Roleri 135.85.R08, "System A" - with additional crowning of the upper wedge - Universal die block - LEUZE light barrier behind d. machine - BOSCH / HOERBIGER hydr. Components - SIEMENS - electrical system - FIESSLER AKAS laser protection device in front of the machine (including FPSC) - 2 front support arms with SLIDING system (plain bearings) - Double foot operation - CE mark / declaration of conformity - User manual: machine and control in German - Safety manual: press brakes Special equipment including: - electrical central lubrication