Used Dalex Dr-D 2 for sale (96,782)

Year of construction: 2017, condition: good (used), machine/vehicle number: 201730233-01/02, 2x Jongia JDRW-2/6B-SP power: 1.5kw current: 6.5A speed: 460rpm rotor blade: 350mm blade width: 110mm shaft length: 500mm Dcodpfx Aewrrmtsd Nsg single seal inside (carbon) (not tested)

Condition: new, mileage: 50 km, power: 140 kW (190.35 HP), fuel type: diesel, overall weight: 5,000 kg, color: white, gearing type: mechanical, number of seats: 3, Year of construction: 2025, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ Mercedes Benz Sprinter 519 CDI 5.0t with Rockstroh Drain Jet 100-2 High-Pressure Flushing Installation Internal Number: #499 Rockstroh Drain Jet 100-2 * PTO from the Sprinter * Pratissoli KF32 high-pressure pump * approx. 120 liters/minute at 180 bar (40KW) * Pressure control and safety valve * 1st hydraulic HD hose reel for approx. 120m DN13 * 2nd hydraulic HD hose reel for approx. 80m DN19 * Filling hose reel with approx. 40m DN20 * approx. 1,000 liter water tank * Low water cut-off protection * Electric filling equipment and overflow protection Dcedpfsxc Syrox Ad Nsg * Electronic speed regulation * Bypass circuit * Radio remote control * Electromagnetic clutch * Diesel auxiliary heater * LED work lights * LED interior lighting * LED beacon lights * Various storage options * Waterproof plastic floor coating with non-slip surface * Basic set of cleaning nozzles Special equipment: 2nd battery (auxiliary battery) interior, 3-button remote for central locking, 13-pin trailer socket, 1-pole battery isolator switch, driver assistance system: traffic sign recognition, tachograph control in front under headliner, chassis: stabilization level III, all-weather floor mats, vehicle without tie-down points, transmission lock for PTO, front cup holders, A-pillar grab handles, additional main key, rear door (opening angle 270 degrees), hinged lid for storage compartment, terminal strip for electrical connections (driver’s seat console), comfort lighting in passenger/load compartment, dash load package (USB ports and additional 12V socket), wiring duct at rear portal, wiring duct at side wall, navigation system for MBUX multimedia, fog lights with cornering light, PTO 2B with intermediate shaft, parameterizable special module, cross member for trailer hitch, cross member with integrated step, sliding door left side load/passenger compartment, rear mud flaps, driver’s cab seats: comfort driver’s seat, sensor for auxiliary heater tank, additional battery separation relay, reinforced front axle, provision for transmission oil cooler, provision for load area partition, winter package, soft-close sliding door left, soft-close sliding door right Further equipment: 3rd brake light, overhead storage above windshield, storage compartment below dashboard passenger side, adaptive brake light, passenger airbag, driver airbag, acoustics package, hill start assist, trailer coupling: electrics for trailer socket, electrically folding exterior mirrors, electrically adjustable and heated exterior mirrors (both), exterior mirror with blind spot assist, outside temperature display, DAB tuner (digital radio), ceiling light in cargo space with door contact, automatic driving light control, entry grip on right rear pillar, entry handle for sliding door at load area partition, driver assistance system: turn assist, driver assistance system: active brake assist, driver assistance system: active lane keeping assist, driver assistance system: start info assist, driver assistance system: attention assist (fatigue detection sensor), driver assistance system: intelligent speed assist, driver assistance system: breakdown management, driver assistance system: crosswind assist, digital tachograph, 250 A alternator, speed limiter system 90 km/h, body/superstructure: standard high roof van, instrument cluster with color display, communication module (LTE) for digital...

Condition: used, Year of construction: 2015, operating hours: 4,108 h, power: 151 kW (205.30 HP), Equipment: air conditioning, all wheel drive, cabin,

Condition: used, Year of construction: 2021, operating hours: 803 h, machine/vehicle number: 0771100001M000415, mast type: telescopic, fuel type: diesel, Equipment: all wheel drive, Drive: Wheel Empty weight: 12.200 kg Lifting capacity: 454 kg Working height: 2.275 cm Dodpfxetr Nu Ho Ad Njcg Max. horizontal reach: 1740 m Transport dimensions (LxWxH): 10.36x2.49x2.78 Please contact PFEIFER GROUP for more information

Condition: used, machine/vehicle number: 874045, Year of construction: 2018, operating hours: 3,612 h, lifting height: 4,000 mm, fuel type: diesel, power: 35 kW (47.59 HP), motor manufacturer: Yanmar, Lifting capacity: 2.500 kg Maximum passing height: 218 cm Front tyres / undercarriage remaining: 70 Rear tyres remaining : 70 Tyre brand: - Front tyre size: - Rear tyre size: - Transport dimensions (LxWxH): 3.68x1.15x2.17 Please contact PFEIFER GROUP for more information Dedpfx Astr H Aajd Nocg

Condition: as good as new (ex-display), Year of construction: 2011, operating hours: 2,500 h, functionality: fully functional, machine/vehicle number: ----, working range: 4,500 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 250 mm, workpiece weight (max.): 8,000 kg, type of input current: AC, input voltage: 400 V, sheet thickness aluminum (max.): 150 mm, table length: 4,500 mm, operating speed: 20,000 mm/s, table width: 2,400 mm, tank capacity: 8,000 l, pressure: 4,150 bar, positioning speed: 40 m/min, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 15 m/min, table height: 1,100 mm, operating pressure: 4,150 bar, warranty duration: 3 months, input current: 60 A, cutting speed: 20,000 mm/min, travel speed (max.): 40,000 mm/min, year of last overhaul: 2024, overall weight: 6,000 kg, power: 44.13 kW (60.00 HP), Water cutting machine from showroom. 2 head water cutting machine CMS Tecnocut Easyline Dcsdpfx Ajq U Irmed Nog 1 2D head with 250 mm Z-axis range 1 head 3D with 150 mm Z-axis range, A-axis range +/- 274 degrees, B-axis +/- 62 degrees, full 3D control , no 2.5D like many other machines Fully interpolated heads, so controlled via CNC and not manually coupled Cutting range: X-As: 2,000 mm Y-As: 4,000 mm Z-As: 250 / 150 mm A-As: +/- 274 degrees B-As: +/- 62 degrees Options: - 5-As cutting head - extra 2D cutting head - Chain discharge for abrasive - Anti-collision sensors on both heads More details / official quotation on request 60HP Jetpower EVO pump with as much as 5 L/min capacity ( liters bring cutting speed ) max pressure 4150 bar. We are since 13 years official CMS dealer Perfectly maintained and technical condition 100% Machine will be delivered in new condition, pictures are during last use We give 6 months warranty on this machine Rent / Lease / all in lease is also negotiable

Condition: good (used), Schindler DR VCB 025 Biodyn 25 C BR Frequency Converter Schindler DR VCB 025 Dcodpfxjtpwhvo Ad Nog Biodyn 25 C BR ID. No. 59400893 Frequency Converter Input 3AC 340...460V 50/60Hz IC1CS (400V): 21A Output 3A 0...400V 0...65Hz IC2CS: 25.5A IC2N: 21A You can find more items in other sizes – new and used – in our shop! International shipping costs upon request!

Condition: used, mileage: 267,835 km, power: 335 kW (455.47 HP), first registration: 05/2019, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: green, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, Mercedes-Benz Arocs 1846 HAD 4x4 * EZ: 05/27/2019 * 267825 km * EURO 6 * 10677 displacement * 335 kW (455 hp) * Protective plate for HAD high-pressure lines * Front axle 7.5 t * Hydraulic Auxilliary Drive (HAD) * Front axle straight version * Rear axle crown gear 300 planets 13.4 t * Axle ratio i=3.714 * Air suspension rear axle * ABS & ASR * ABS can be switched off * Frame overhang 750 mm * Wheelbase 3750 mm * Steering, 1-circuit * Unregulated power steering pump * Front axle stabilizer * Driver's suspension seat comfort * Passenger's functional seat * Comfort bed below * Velours seat covers * Air conditioning * Hot water auxiliary heating * Comfort cab suspension with steel suspension * Mechanical hydraulic cab tilting device * Wheel arrangement 4x4 HAD * 18 tonne truck * Air suspension rear axle * CB radio * Radio, with USB connection and Bluetooth * Front spring leaf * ESP * Cruise control * All information without guarantee * Further information and criteria on additional services / Additional service * Repainting, retrofitting possible / repainting, retrofitting possible * Short-term license plate / Customs license plate / License plate * Transfer and shipment possible / Transfer and shipment possible * Help with customs and export documents / Help with customs and export documents * Procurement of COC and EUR documents / Procurement of COC and EUR documents * On the market since 1991 / Since 1991 on the market * Leasing and financing possible. We have been working with various leasing companies for many years and can therefore find the optimal financing for every customer. We can often also support customers with poor credit ratings and put them in touch with good leasing partners. * Own workshop * Mówimy po polsku. * We speak english. * Goworim po russki * The repainting in your desired color is possible in our house at a reasonable price and in good quality. Dcjdpfx Adety Hngj Njg * Are you further away and have no possibility or time to visit and check a truck with us? No problem, you are welcome to order an independent expert of your confidence and have the truck checked technically and visually. If, contrary to expectations, a defect should arise, we can remedy the defect quickly and effectively in our workshop. We can also deliver your new used vehicle across Europe for an additional charge. You are further away and have no possibility or time to visit and check a truck with us? No problem, you are welcome to order an independent expert of your confidence and have the truck checked technically and visually. If, contrary to expectations, a deficiency should occur, we can fix it quickly and effectively in our workshop. Furthermore, we can deliver your new used cars for a surcharge Europe-wide.

Condition: used, mileage: 778,000 km, power: 324 kW (440.52 HP), first registration: 03/2016, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, 2 units available German vehicles, in good technical condition, large cab, differential lock, Dodexcc Iyepfx Ad Nscg intarder, New TÜV (inspection) available at extra cost! If interested, please call Christian

Condition: new, SPRING BALANCE with safety equipment in accordance with DIN 15112 Brand DALEX Type D 6/130 Tar load 115-130 kg Dodpfx Aovr Elqsd Necg Cable extension 3 m Suspension safety hook, rotatable and pivotable Load capacity continuously adjustable via adjustment screw Spring break protection Weight: 44 kg unused / as good as new / minor signs of storage

Condition: used, overall weight: 34,000 kg, axle configuration: 2 axles, first registration: 07/2002, loading space length: 11,900 mm, loading space width: 2,450 mm, loading space height: 3,150 mm, Equipment: ABS, * Vehicle has French papers * Floor adjustable with radio/remote control * Folding ramps with radio/remote control * Edscha soft top currently removed As viewed or offered, without further services / accessories. Our offer is generally without new TÜV approval. If a new TÜV inspection is required, we will be happy to make you an offer from our partner workshops! The vehicle may have advertising stickers and/or lettering. Our general terms of delivery and payment apply. We support you with export, preparation of export documents, procurement of license plates, supplier's declaration, etc.! Dodpfx Ajv Tgv Tod Nocg The information provided in advertisements, the Internet, price tags and pictures are non-binding descriptions and do not serve as guaranteed characteristics. The seller accepts no liability/warranty for typing and data transmission errors. Listed equipment must be checked separately if necessary. Subject to errors and prior sale.

Condition: good (used), DONAU DR 23 – High-Speed Radial Drilling Machine - Drilling capacity / steel approx. 28 mm - Arm reach 700 mm - Morse taper MK3 - Speed range 70-1550 rpm (gearbox) - Automatic feeds 0.075-0.3 mm - Thread cutting device - Drilling depth approx. 130 mm - Hydraulic clamping - Documentation Dcsdpfxoxzqaus Ad Njg Dimensions: LxWxH 2x1.7x1.9 meters / Weight 1900 kg Subject to errors and input mistakes

Condition: new, color: black, driver cabin: other, gearing type: other, Vehicle location: Bovenden, Subframe type D16 for Volvo FM xxx 6x4 wheelbase: 3400mm. Subframe is from year of construction 2008! With hydraulic lines for tipping trailer! Dodpfxji Rq E Rj Ad Nocg Prices between 2.600,00€ and 4.900,00€ net! Tipping ram available for an extra charge! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: used, functionality: fully functional, Siemens Sipart DR 20 S/K Controller Description: Siemens 6DR 2001-1 SIPART DR20 Controller, 72 x 144, Standard Controller with S Output, 2 Analog Inputs for current, 1 Digital Input and 1 Digital Output, 230V AC Power Supply. Dedpfxjt Awg De Ad Nscg Good working condition. Please check out our other listings as well.

Condition: used, Year of construction: 1990, machine/vehicle number: 2316-3, Lg.no. 10622 Technical data: - Drilling capacity into solid steel ST 60 28 mm - Drilling capacity GG 25 40 mm - Thread cutting ST 60 M 30 - Thread cutting GG 25 M 40 - Drill spindle holder MK 3 - Spindle diameter 50 mm - Quill stroke 150 mm - 18 drilling spindle speeds 45 - 2240 rpm - 4 drilling feeds 0.1 - 0.45 mm - min. / max. distance spindle - table 300 / 700 mm - Drilling radius min / max 305 / 1005 mm - Table height 820 mm Dcodpou Et Nbsfx Ad Nsg - Table size 1200 x 600 mm - Drive 400 V / 6 kW - Space requirement approx. W 1300 x H 2800 x D 2300 mm - Weight approx. 1500 kg - with: - Thread cutting device - hydr. columns + boom clamping - Coolant device - Vertical T-slots on the left side of the machine

Condition: good (used), Year of construction: 1992, machine/vehicle number: 2355-2, Offer 24416 Technical data: - Drilling capacity into solid steel ST 60 28 mm - Drilling capacity GG 25 40 mm - Thread cutting ST 60 M 30 - Thread cutting GG 25 M 40 - Drill spindle holder MK 3 - Spindle diameter 50 mm - Quill stroke 150 mm - 18 drilling spindle speeds 45 - 2240 rpm - 4 drilling feeds 0.1 - 0.45 mm - min. / max. distance spindle - table 300 / 700 mm - Drilling radius min / max 305 / 1005 mm Dcedjufw S Repfx Ad Neg - Table height 820 mm - Table size 1200 x 600 mm - Drive 400 V / 6 kW - Space requirement approx. W 1300 x H 2500 x D 2300 mm - Weight approx. 1500 kg - with: - thread cutting device - hydr. columns + boom clamping - Coolant device - Vertical T-slots on the left side of the machine

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 6214330001, overall weight: 89 kg, total height: 950 mm, power: 2.2 kW (2.99 HP), pressure (max.): 8 bar, noise level: 60 dB, new oil-free DENTAL piston compressor Dr Sonic 320-50-W-ES with attached double column adsorption dryer with sound insulation box and additional fan Oil-free piston compressor, two-cylinder, single-stage, max pressure 8 bar, built on 50 lt. internally coated tank with attached adsorption dryer. Ideal for 3 dental chairs – minimal space requirement due to compact design. Specifications: Djdpfx Aevlw Hajd Nscg Type : Dr. SONIC 320-50-W-ES-3M Operating overpressure max : 8 bar Suction capacity : 320 l/min Effective delivery rate at 6 bar*) : 210 l/min Number of steps : 1 Number of cylinders : 2 Compressor speed : 1400 1/min Nominal power drive motor : 2,2 Motor protection class / insulation class : IP 54 / F Operating voltage / frequency : 230 /50 V/Hz Sound pressure level (DIN 45635 T13) : 60 dB(A) Tank volume : 50 litres Width : 700 mm Depth : 500 mm Height : 980 mm Weight : 89 kg Compressed air connection : G 3/8

Condition: used, Sigmatek DIAS wire plate version 2- compatible with NC4 control - removed from Demag ET 6 system - removed from running machine - fully functionalmanufacturer: Sigmatek spare part no.: Dcsdpfx Adjrr Egze Nog manufacturer no.: Dition: gebraucht

Condition: refurbished (used), Year of construction: 1976, Work table 500mm x 1200mm Arm travel distance 600mm Tool holder MK 4 Drilling capacity 32mm in steel Thread cutting device Coolant device Electronics 24V control voltage Emergency stop 2-channel Safety device on the drill Completely overhauled in 2025 12 months warranty Dsdpfownn S Rex Ad Nscg New paint RAL 7035/7031

Condition: used, Year of construction: 1991, Work table 600mm x 1200mm Column travel 600mm Tool holder MK 3 Drilling capacity 28mm in steel Dcsdpfxoxpfgle Ad Nsg Tapping device Coolant system Documentation

Condition: refurbished (used), Year of construction: 1983, Work table 600mm x 1200mm Arm travel 600mm Tool holder MK 4 Drilling capacity 32mm in steel Dcodpfxsmt Ed Re Ad Nsg Thread cutting device Coolant system Electrics 24V control voltage Emergency stop 2-channel Guard on the drill Completely overhauled 2025 12 months warranty New paint RAL 7035/7031

Condition: used, Year of construction: 2017, Country of manufacture - Italy Dcodov Nkauspfx Ad Nog INSIDE DIMENSIONS (WIDTH X DEPTH X HEIGHT): 13.200 X 8.900 X 5.400 MM OUTSIDE DIMENSIONS (WIDTH X DEPTH X HEIGHT): 14.060 X 9.500 X 6.900 MM FAN MOTORS: 5,5 KW AT VARIABLE SPEED FAN MAXIMUM ELECTRIC POWER REQUIRED: 55 KW

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: AM642682, ALCATEL 2063 C2 2-Stage Rotary Vane Pump Pumping speed: 66 m³/h Ultimate pressure: Without gas ballast < 5 x 10‐3, With gas ballast < 5 x 10‐2, Mains connection / Power consumption: 380V/4A, Inlet flange: KF40, Condition: good, fully refurbished, Operating fluid: PFPE, Dcedpjxtb Erofx Ad Njg 1 year warranty

Condition: good (used), Year of construction: 2010, Poliedra is a dryer suitable for the curing of UV lacquers on three-dimensional surfaces. In the case of spray applications, the UV dryer must also cure the product applied to the vertical edges of the panel. Superfici developed UV modules with special reflectors. The special geometry of the reflector of the "Poliedra" UV supports a uniformly UV irradiation distribution, both on the surface and on the edges. In this way, with a single lamp, inclined with respect to the direction of advancement of the pieces, lamp length 1700 mm – 120 W/cm available lamp power from 40 to 120 W/cm type of lamps gallium and mercury (new lamps) Dcodpfjmmbvtjx Ad Neg

Condition: ready for operation (used), Year of construction: 2001, Robotic 3D welding station consisting of a welding robot and two rotary tables. Dedpfsp Am T Ujx Ad Nocg Dimensions of rotary tables: 2000mm x 1000mm Includes: - 2 x rotary tables with 3-phase SEW-EURODRIVE motors - dimensions of the rotary tables: 2000mm x 1000mm - welding wire feeding station included. - 7-axis OTC Daihen IRB-651 robot manipulator with a linear track, teaching panel and OTC Daihen Corporation L5561 control cabinet - OTC Daihen Digital Pulse CPDP-350 Power supply for the welding robot inverter - 3-phase isolation transformer - NORATEL 3LT20.0-400/200-23 - 3-phase transformer DAIHEN W-L00557 - Documentation of the OTC Daihen robot. The stand is ready for launch.