Used Dilo Ud-Ii/25 for sale (17,005)

Condition: refurbished (used), Year of construction: 1987, machine/vehicle number: 3163, functionality: fully functional, pressing force: 25 t, stroke length: 100 mm, table width: 360 mm, table length: 220 mm, Equipment: safety light barrier, Schoen hydraulic double-column press NH 25 (3163) completely overhauled machine – year of manufacture 1987/2026 Kljdpozd Akqefx Ab Ieu Pressing force 250 kN Installation height: 280 mm Stroke: 100 mm Table (width): 360 mm Table (depth): 220 mm The machine is undergoing a general overhaul new control system new light curtain hydraulic system revised

Condition: used, Year of construction: 1993, operating hours: 9,924 h, load capacity: 2,500 kg, lifting height: 3,800 mm, fuel type: gas, gearing type: automatic, Equipment: head guard, * STILL R 70-25 Kljdpfx Abozdwtye Iju * Year of manufacture: 1993 * VW 1.6 engine * Cylinder head gasket defective

Condition: used, Year of construction: 1995, x-travel 650 mm Kedjx Iwg Repfx Ab Islu y-travel 410 mm z-travel 410 mm Control Mitsubishi Meldas 50 M max. turning speeds 6.000 min/-1 tool taper SK 40 In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: good (used), Year of construction: 2001, Offer 26161 Technical data: Klsdpezfim Iofx Ab Iou - Rated power at 50% duty cycle: 25 kVA - Max. welding power: 107 kVA - Adjustable reach: 140 - 500 mm - Welding parameters: - Steel sheet: 6 + 6 mm - Brass sheet: 3 + 3 mm - Aluminum sheet: 1.2 + 1.2 mm - Adjustable electrode force: 17 - 278 daN - Required air pressure: 6 - 10 bar - Cooling water flow rate: 8 l/min - Power supply: 400 V - Space requirement: approx. W 670 x H 1250 x D 1600 mm - Weight: approx. 240 kg - Including: - Welding control system DALEX MPS 200 - Foot-operated switch

Condition: excellent (used), Here we offer a Leybold Trivac oil-sealed vacuum pump. Leybold Trivac oil-sealed vacuum pump with exhaust filter. Leybold TRIVAC D 25 B oil-sealed vacuum pump. 2.5 x 10⁻³ mbar Pumping speed (50 Hz): 25.7 m³/h Pumping speed (60 Hz): 30.8 m³/h Kjdpfozdqq Eex Ab Ijlu Exhaust filter with oil return ARS 16-25 Type: D 25 B Condition: used Scope of delivery: (See picture) (Subject to changes and errors in the technical data and specifications!) We will gladly answer any further questions you may have over the phone.

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 2215, Type: OptiFlour 600 II Serial number: 2215 Year of construction: 2013 Belt width: 600 mm Power: 3 x 400V, 50Hz, 5.3kW Dimensions: 2750 x 1650 x 2300 mm Weight: 1025 kg GEA OptiAir cyclone Type: OPA Serial number: 515 Year of constuction: 2011 Klodpfoymbfajx Ab Ieu Power: 3 x 400V, 50Hz, 4kW Dimensions: 1350 x 950 x 1800 mm Weight: 450 kg

Condition: like new (used), functionality: fully functional, lifting height: 4,000 mm, load capacity: 2,000 kg, DC PRO 25, 2000 kg, 1/1, H4, V 8/2. Lifting height: 4 m. 1/1. Control unit not included. Condition: used, in excellent condition! Kledpfxjzdkcus Ab Iou Optional: can be converted to a maximum capacity of 5000 kg for an additional charge.

Condition: excellent (used), Year of construction: 2010, Model Amada HFE M2 103t x 3110 3m, 8 axis Press Brake Year 2010 Very low hours Tonnage 100 tonnes Max. Bend Length 3110 mm Stroke Length 200 mm Approach Speed 1 - 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1 - 100 mm/sec Oil Capacity 110L Motor Power Weight 6600 Kg Feissler machine mounted Laser guards ,side and rear interlocked fencing Dimensions Machine Length 4535 mm Machine Depth 2580 mm Machine Height 2680 mm Distance Between Side Frames 2705mm Beam width 60 mm Table height 960 mm Open Height 470 mm Kledpfx Abszb Eg Rs Iou Throat Depth 420 mm

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 4,550 h, load capacity: 2,500 kg, lifting height: 3,670 mm, fuel type: electric, mast type: simplex, construction height: 2,525 mm, fork carriage width: 1,150 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Standard Condition: Refurbished, no warranty Klsdszdlu Sspfx Ab Iou Technical condition: very good Front tire type: Superelastic Front tire size: Brand new Front tire condition: New Rear tire type: Superelastic Rear tire size: Brand new Rear tire condition: New Battery voltage: 80V Battery capacity: 620Ah Battery manufacturer: refurbished and tested Battery type: PzS Battery year of manufacture: 2020 Description: Refurbished, serviced and inspected according to FEM 4.004 (UVV). Completely repaired, serviced and checked. Side shifter, 3rd valve, 4th valve, rear work light, front work light, roof protection, windshield, half-cab, safety light.

Condition: used, mileage: 612,009 km, power: 375 kW (509.86 HP), first registration: 02/2008, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: green, gearing type: semi-automatic, emission class: euro5, loading space length: 6,280 mm, loading space width: 2,480 mm, loading space height: 490 mm, Year of construction: 2007, Equipment: ABS, air conditioning, crane, parking heater, soot filter, Body: - Flatbed with aluminium drop sides - Internal dimensions: 6,280 mm x 2,480 mm x 490 mm - Raised front wall - Storage box - Lashing rails in the loading bed Crane: - Fassi F 660 AXP.25 loading crane from 2007 - Radio remote control - 4-point outrigger support Crane Outreach/Lifting Capacity (hydraulic): - 3.40 m = 16,000 kg - 4.30 m = 13,095 kg - 5.95 m = 9,500 kg - 7.70 m = 6,980 kg - 9.65 m = 5,440 kg - 11.70 m = 4,375 kg - 13.85 m = 3,640 kg - 16.10 m = 3,100 kg Equipment: - Cab: L (long) - Telligent transmission with clutch pedal - Air conditioning + auxiliary air conditioning - Auxiliary heating - Additional thermal insulation - Air horns on cab roof - Fuel tank: 590 L aluminium - Driver/co-driver air-suspended comfort seats incl. horizontal suspension - Sun visor Technology: - Audio system: Truckline CD 70 radio - Hands-free phone kit - Multifunction steering wheel - Electrically adjustable and heated exterior mirrors - Central locking with remote control - Cruise control - CB radio - Pull-out refrigerator - Reversing alarm (external warning signal) - Circuit breaker - Rotating beacon left/right Safety & Environment: - Voith retarder - Telligent brake system with ABS + ASR - Rear axle differential lock - Emission standard EURO 5 Kledpfx Abjwq Ud So Iju Miscellaneous: - German first registration - 1 owner - Axle configuration: 6x4 + hydraulically steered trailing axle (NLA) - Engine 16.0 L - 375 kW V8 diesel (OM 502 LA) - Wheelbase 4,500 mm - Payload 6,675 kg according to registration - Gross vehicle weight 32,000 kg Vehicle and crane have been serviced regularly. Since 1972, your reliable partner for automobiles/commercial vehicles in 28832 Achim at Bremer Kreuz. NutzfahrzeugZentrum Behnke always has about 200 vehicles available, including vans, commercial vehicles, and construction machinery! We consistently offer attractive financing options at special rates. If interested, we will gladly provide you with an individual offer! Trade-ins for your commercial vehicle/construction machine are welcome. If a new technical inspection (TÜV) is required, we will be happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection. Delivery of your "new" commercial vehicle by external partners is possible at an additional cost. All information in advertisements, on the internet, price tags and pictures are non-binding descriptions and do not constitute guaranteed properties. The seller assumes no liability/warranty for input or data transmission errors. Stated features are to be checked separately if required. Subject to errors and prior sale.

Condition: used, mileage: 612,009 km, power: 375 kW (509.86 HP), first registration: 02/2008, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: green, gearing type: semi-automatic, emission class: euro5, loading space length: 6,280 mm, loading space width: 2,480 mm, loading space height: 490 mm, Year of construction: 2007, Equipment: ABS, air conditioning, crane, parking heater, soot filter, Body: - Flatbed with aluminium drop sides - Internal dimensions: 6,280 mm x 2,480 mm x 490 mm - Raised front wall - Storage box - Lashing rails in the loading bed Crane: - Fassi F 660 AXP.25 loading crane from 2007 - Radio remote control - 4-point outrigger support Crane Outreach/Lifting Capacity (hydraulic): - 3.40 m = 16,000 kg - 4.30 m = 13,095 kg - 5.95 m = 9,500 kg - 7.70 m = 6,980 kg - 9.65 m = 5,440 kg - 11.70 m = 4,375 kg - 13.85 m = 3,640 kg - 16.10 m = 3,100 kg Equipment: - Cab: L (long) - Telligent transmission with clutch pedal - Air conditioning + auxiliary air conditioning - Auxiliary heating - Additional thermal insulation - Air horns on cab roof - Fuel tank: 590 L aluminium - Driver/co-driver air-suspended comfort seats incl. horizontal suspension - Sun visor Technology: - Audio system: Truckline CD 70 radio - Hands-free phone kit - Multifunction steering wheel - Electrically adjustable and heated exterior mirrors - Central locking with remote control - Cruise control - CB radio - Pull-out refrigerator - Reversing alarm (external warning signal) - Circuit breaker - Rotating beacon left/right Kedpfx Abowpbgqs Ijlu Safety & Environment: - Voith retarder - Telligent brake system with ABS + ASR - Rear axle differential lock - Emission standard EURO 5 Miscellaneous: - German first registration - 1 owner - Axle configuration: 6x4 + hydraulically steered trailing axle (NLA) - Engine 16.0 L - 375 kW V8 diesel (OM 502 LA) - Wheelbase 4,500 mm - Payload 6,675 kg according to registration - Gross vehicle weight 32,000 kg Vehicle and crane have been serviced regularly. Since 1972, your reliable partner for automobiles/commercial vehicles in 28832 Achim at Bremer Kreuz. NutzfahrzeugZentrum Behnke always has about 200 vehicles available, including vans, commercial vehicles, and construction machinery! We consistently offer attractive financing options at special rates. If interested, we will gladly provide you with an individual offer! Trade-ins for your commercial vehicle/construction machine are welcome. If a new technical inspection (TÜV) is required, we will be happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection. Delivery of your "new" commercial vehicle by external partners is possible at an additional cost. All information in advertisements, on the internet, price tags and pictures are non-binding descriptions and do not constitute guaranteed properties. The seller assumes no liability/warranty for input or data transmission errors. Stated features are to be checked separately if required. Subject to errors and prior sale.

Condition: used, Technical details: bore capacity in steel (diameter): 25 mm throat: 310 - 315 mm bore stroke: 200 mm spindle taper MT: MK4 spindle speed:: 63 - 1000 U/min Distance spindle/table max.: 670 mm table clamping surface:: 640 x 540 mm table rotating: 360 ° Ksdpfezfiy Uox Ab Islu current- max.: 7 A total power requirement: 3 kW weight of the machine ca.: 700 kg dimension machine xH: 0,9 × 0,6 × 2,46 m

Condition: used, machine/vehicle number: 16737, operating hours: 2,683 h, load capacity: 2,500 kg, lifting height: 200 mm, construction height: 1,400 mm, fork length: 1,150 mm, enginetype: Electric, manufacturer: Still Kedpfxex Ntx Sj Ab Islu

Condition: used, machine/vehicle number: 16807, Year of construction: 2017, operating hours: 6,899 h, load capacity: 2,500 kg, lifting height: 6,200 mm, free lift: 1,850 mm, load center: 600 mm, construction height: 2,700 mm, fork length: 1,150 mm, front tire size: , rear tire size: , overall weight: 4,203 kg, enginetype: Electric, manufacturer: Jungheinrich Klsdpfsyg S T Uex Ab Isu

Condition: used, machine/vehicle number: 13983, Year of construction: 2019, operating hours: 2,208 h, load capacity: 1,500 kg, lifting height: 3,000 mm, load center: 500 mm, construction height: 2,050 mm, fork length: 1,150 mm, front tire size: 18x7-8, rear tire size: 140/55-9, overall weight: 3,097 kg, enginetype: Electric, manufacturer: Jungheinrich Klsdpfx Abjw R Ai Ie Isu

Condition: new, Lincoln 1100 Series Impinger II Range Natural gas powered Gas power 42.2 MJ per deck Power supply 230 V / 1 phase / 50 Hz / 2 A Natural gas pressure 7-12" WC Minimum gas pipe size 1½" / 38 mm Flexible gas connector (option) Output 25 pizzas 12"/h at 6.5 min Cooking chamber 711 mm Temperature 121 °C to 302 °C Cooking time 1 to 30 min Conveyor 457 mm wide Belt 1422 mm with product stop Conveyor opening 76.2 mm Removable conveyor from the front Digital microprocessor controls Lockable settings Stainless steel top, front, and sides Stackable up to 3 chambers Rear clearance 152 mm Right clearance 610 mm Ventilation required for gas models FastBake Technology (option) Infeed/outfeed shelves (option) Split Belt 50/50 (option) Dimensions 1422 × 991 × 1128 mm Lincoln 1154 natural gas conveyor oven – controlled continuous cooking for pizzeria and catering businesses Kljdpfszcbz Hsx Ab Iju The Lincoln 1154-F00-E-KF006 belongs to the 1100 Series Impinger II range, a professional conveyor oven designed for continuous cooking in the food service industry. It is intended for pizzerias, snack bars, restaurant chains, high-volume establishments, and commercial kitchens that require consistent cooking with a conveyor belt rather than traditional batch cooking. Its impingement air technology heats, cooks, browns, and crisps products with efficient air circulation in a 711 mm cooking chamber. Why this model stands out This 1154 model operates on natural gas with a 230 V, 1-phase, 50 Hz, 2 A electrical power supply. It combines a 457 mm wide belt, an adjustable cooking time of 1 to 30 minutes, and a temperature range of 121 °C to 302 °C. For a professional, the benefit is clear: standardize the results, streamline service, and reduce repetitive tasks during peak periods.

Condition: used, -Dimensions: 1115x995x980 mm -Serial number: 961009 -Model: ATIR 2 -Load capacity for light vegetables: 9 kg -Load capacity for heavy vegetables: 35 kg -Washing time: 2-3 minutes -Tank capacity: 328 L -Tilting tank -Voltage: 400V Kljdpfxoy Idp Ss Ab Ieu -Power: 1.45 kW -Weight: 122 kg -Refurbished equipment: the equipment is prepared upon order, and the lead time for processing and return is agreed upon at that time (please inquire about the price after refurbishment).

Condition: good (used), *DESCRIPTION* Professional ARO AROMASTER II welding set, year 1997. Medium-frequency spot welding unit, 1000Hz, delivered complete with its 2 original tools. ARO Château-du-Loir brand = a global reference in resistance welding. Robust equipment, spare parts always available. *LOT COMPOSITION* 1. *AROMASTER II Generator* Code ZU182000 - No. 9713221A523 - Year 1997 400V Three-phase 50Hz - 20.7 kVA at 100% / 29.3 kVA max Integrated water cooling - NF A 82-020 standard 2. *ARO YB200450 X-Gun* No. 9712211B669 - Year 1997 Water-cooled - 450mm copper arms - Force ∼300 daN 3. *ARO YB200550 Dent Puller Gun* No. 9712211B640 - Year 1997 For welding pull studs Ø2.5mm *TECHNICAL SPECIFICATIONS* Brand: ARO - Made in France Technology: Medium frequency 1000 Hz Power supply: 400V Three-phase 32A minimum Welding current: ~10,000 A Klodpfx Abjzczw Ij Isu Weldable thicknesses: Steel 0.6 to 2.0 + 2.0 mm Control: Digital - Time/intensity adjustment Cooling: Water - Integrated unit Generator weight: Approximately 110 kg - On castors *CONDITION & WARRANTY* Set in good overall working condition. Tested in the Gortina workshop: cycles with gun and puller OK, pneumatic pressure OK, no water leaks, thyristors OK. Original ARO yellow paint. Cables and wiring in good condition. *ADVANTAGES* 1. *2-in-1 Set*: Spot welding + inertia dent pulling. One generator only. 2. *ARO Reliability*: Industrial construction. National after-sales service. 3. *Economy*: Equivalent new cost 2026 > €15,000 (excluding VAT). 4. *Ready for use*: Generator + gun + puller, original 1997. *APPLICATIONS* Traditional automotive bodywork, vehicles before 2010, vans, 4x4s, restoration of old vehicles. Dent pulling without paint. Training centers.

Condition: used, machine/vehicle number: 17078, Year of construction: 2016, operating hours: 5,779 h, load capacity: 2,500 kg, lifting height: 4,890 mm, free lift: 1,480 mm, load center: 500 mm, construction height: 2,275 mm, front tire size: , rear tire size: , overall weight: 3,340 kg, enginetype: Electric, manufacturer: Still Kedjzfdxxjpfx Ab Ielu

Condition: excellent (used), Year of construction: 1966, I sell a circular saw made in Germany. Company Eisele model vms II in good condition Kodpfx Aovbwfneb Ijlu

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 17405, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, feed rate X-axis: 50 m/min, feed rate Y-axis: 50 m/min, feed rate Z-axis: 50 m/min, nominal power (apparent): 36 kVA, controller manufacturer: MATSUURA, controller model: G-TECH 840 DI, total height: 3,500 mm, total length: 6,000 mm, total width: 5,000 mm, overall weight: 15,000 kg, spindle speed (min.): 50 rpm, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 240, mount diameter: 40 mm, tool length: 300 mm, tool diameter: 80 mm, tool weight: 10,000 g, input voltage: 415 V, input frequency: 50 Hz, input current: 50 A, Equipment: chip conveyor, MATSUURA MAM 72-25 V CNC Universal Machining Center - Tool holder: SK 40 - B-axis travel: -110°/+110° - C-axis travel: 360° - Distance between pallet surface and spindle reference line: -20 to 430 mm - Distance between B-axis center and spindle reference line: 4 - 410 mm - Distance between B-axis center and spindle reference line: -10 mm - Distance between pallet center line and bed 0-point: 265 mm Klsdjy I Sfhepfx Ab Isu - Distance between pallet center line and Y 0-point: 180 mm - Internal diameter of the spindle bearing: 70 mm - Tool clamping force: 7.0 kN - Feed rate B-axis: 30/min - Feed rate C-axis: 50/min - Max. tool diameter: 80 mm, with free secondary stations: 150 mm The machine is equipped with a chip conveyor and a coolant system. Note: includes the tool holders located on the tool changer! Note: the machine can be transported on a truck up to 2700 mm wide! Note: the item must be picked up between August 24 and August 27, 2026, on a date to be determined. FCA D-61352 Bad Homburg - loaded onto a truck.

Condition: used, Year of construction: 1991, Eye-level control panel, Aigner integral stop including feed with sliding carriage (without stop ruler), milling stop with digital display and swivel mechanism Storage location: Nattheim Kledpfsyi A Tdsx Ab Iju

Condition: used, Year of construction: 2007, Working area: 2780 x 1140 mm (vertical milling) 2500 x 950 mm (horizontal drilling) X-Y travel: 2980 x 1271 mm Z-axis travel: 200 mm Passage height: 180 mm The structure of the base body is a monolithic construction made of thick-walled steel. It is stiffened by welded triangular plates across the entire machine bed, making it extremely stable. The triangular shape used for load-bearing parts, with a large base, is the secret to ensuring lasting precision and stability. The machine layout allows the user optimal workflow despite minimal space requirements. The base body constructed in this way therefore offers the machining unit a balanced and secure base with particularly good load distribution. The mobile unit carrier is made of a solid monoblock. It is positioned in the X direction on prismatically ground guides via recirculating ball slides. On this mobile unit carrier, the working unit is mounted on prismatic, ground guides and the recirculating ball slide. Description of the units and accessories (basic) Drilling unit: Drilling head with 10 + 4 spindles · 6 individually accessible vertical spindles in X · 4 individually accessible vertical spindles in Y · 2 horizontal spindles in X (1 + 1) · 2 horizontal spindles in Y (1 + 1) · Speed: 4,000 rpm · Power: 2.2 kW · Grid: 32 mm · Drill chuck: M 10 with 11 mm fitting · Extraction nozzle: D = 160 mm Vertical milling unit (position 2) · Tool chuck HSK 63F · Speed 1,500 - 24,000 rpm continuously adjustable via inverter · Motor power 4.4 kW (6 HP) from 12,000 rpm (S1) · Right-hand / left-hand rotation · Ceramic bearings · Scope of delivery: 4 tool chucks (right) without collet chuck · Tool changer · Side-mounted tool magazine 7-way (TR7) with full encapsulation to prevent chipping · 7 tool positions for HSK 63F tool holder arranged in a row · maximum tool diameter D=120 mm · maximum weight per holder 4.5 kg · maximum tool weight of all tools 20 kg (TR7) · angular gears can be accommodated Horizontal milling unit (position 1) Horizontal unit with two opposite outputs for milling and grooving. · Speed 9,000 - 18,000 rpm continuously variable via inverter · 1 output for collet 3-20 mm (ER 32) · 1 output for saw/collet 3-12 mm (ER20) (For saw D = 120 mm / bore 50 mm) · Motor power 3 kW (4 HP) · Max. tool diameter front milling: 20 mm · Max. tool length front milling: 110 mm · Max. tool diameter rear milling: 12 mm · Max. tool length rear milling: 80 mm · Max. saw blade diameter: 100 mm · Bore saw blade (ER 32): 50 mm · Mandrel diameter saw blade (ER 20): 12 mm Work table The work table is designed to guarantee the operator maximum freedom of movement. The vacuum quick clamping system ensures maximum flexibility with precise positioning and optimal grip of the workpieces. · 4 supports 900 mm continuously adjustable in X · 8 vacuum suction cups round D = 110 mm continuously adjustable in Y (2 per support) · 2 stops in X (1 x left / 1 x right) · 1 stop in Y per support (total 6) · The retractable reference stops are controlled via CNC. · Scope of delivery: 4 plug-on adapters for suction cups · Pendulum machining standard (2 working areas) Axis movement The drive system in X, Y and Z is carried out via ground ball screws of the highest precision class. The ball drive screw of the X-axis is located exactly in the center Kedpfjx Twdyox Ab Ielu

Condition: excellent (used), Claw jaws Make Schunck type SZA 25 - 30 weight 3 kg Klodog Ny Iyopfx Ab Iju

Condition: excellent (used), functionality: fully functional, MAZAK – 5-axis machining center VARIAXIS 730/5X II (dual pallet changer) Manufacturer: Machine Type: Year of manufacture: Date of commissioning: YAMAZAKI MAZAK Variaxis 730 with dual pallet changer 12/2007 02/12/2008 Ksdpfjzda Dvsx Ab Iolu FEATURES: - Drive power 30/22 kW (30 minutes/continuous operation) - Spindle speed 35-10,000 rpm - Rapid traverse rates 42 m/min - 80 tools - SK50 !!!! - Control system: MAZATROL MATRIX - Tool length measuring device 2 ACCESSORIES: - MAYFRAN chip conveyor "CONSEP 2000", discharge on the right - High-pressure coolant for the spindle, 70 bar - CNC options package, performance signal light - Preparation for monitoring system B