Used Dosing And Mixing Station for sale (14,035)

Condition: new, Big-bag emptying station with cyclone separator For sale is a big-bag emptying station with an integrated cyclone separator, ideal for the low-dust handling and discharge of various bulk materials such as plastic granules, ground materials, powders, or recycled materials. Kjdpfxjzpw U Uj Ag Asdu The system is in fully functional condition and is available immediately. An inspection can be arranged at any time at our warehouse in Wuppertal.

Year of construction: 2023, operating hours: 500 h, condition: like new (used), number of feeding trays: 2, Scope of supply of the system The offer includes: 1. Mixer • Concrete mixer with a capacity of 9 m³. • Mixer screw inside the mixer has been renewed and reinforced. • The mixer is driven by a powerful electric motor. • The mixer is mounted on four load cells (each with a load capacity of 20 t) for precise weighing of the materials to be mixed. 2. Trough screw conveyor 1 • Conveying system for feeding the mixer. Kdedpfezmyviox Ag Aou 3. Trough screw conveyor 2 • Conveying system for discharging the finished mixed material. 4. Liquid feed • Dosing of liquid components via a pumping system from Flux. 5. Electronic control • Electronic control with a mobile operating unit for weighing and dosing based on the weight increase of the material in the mixer. Mode of operation • The mixer is installed on load cells. The current material weight is displayed on the display at all times. • For example, if a total mixture of 4,500 kg is to be produced, this can be dosed precisely according to a predefined mixing ratio, e.g. 80% main material (3,600 kg), 10% additive (450 kg), 7% additive (315 kg) and 3% additive (135 kg). • The smaller additives are pre-weighed and fed into trough screw conveyor 1 via the additive hopper using a travelling carriage from big bags. • Subsequently, the main material is conveyed into the mixer via trough screw conveyor 1 until the desired total weight of 4,500 kg is reached. • After that, the feed is stopped via the trough screw conveyor. • The mixing process then takes place according to the requirements. In our application, the mixing time was approximately 20 minutes. • After the mixing process is complete, the material is discharged via trough screw conveyor 2. To do this, the direction of rotation of the drive motor is switched at the control panel and the discharge screw conveyor is switched on. • The finished mixture can then be filled directly into containers or loaded into transport vehicles (in our case, a push-off trailer or manure spreader). Mixing process based on weight percentages 1. The main material is fed into the trough screw conveyor via the large stainless steel hopper, which then conveys the material into the mixer. In our case, this consisted of solid components from biogas waste. 2. Additional components can be added directly from big bags onto the main material using a second stainless steel hopper and a traverse. This ensures pre-mixing during the conveying process. In our application, biochar and bentonite were added. 3. Liquid components are sprayed directly into the mixer. In our case, we used EMa (activated effective microorganisms) for this purpose. Optionally, the push-off trailer/manure spreader can be purchased.

Condition: good (used), 3x pallet transfer station, safety gate, pallet transfer area – used: Price per unit: €650.00 (net) ex-works, disassembled, packed, and loaded! Manufacturer: unknown Type: unknown Year of manufacture: unknown, likely 2013 Clear internal width: approx. 2.45 m Kjdjzv Iqaspfx Ag Aodu Condition: good to very good Available: immediately Location: Warehouse Frankenberg / Saxony

Condition: used, Year of construction: 2013, functionality: fully functional, total height: 2,322 mm, total width: 1,154 mm, type of input current: three-phase, input voltage: 400 V, overall weight: 1,315 kg, usable tank capacity: 320 l, rotational speed (max.): 80 rpm, rotational speed (min.): 20 rpm, Equipment: type plate available, Due to the closure of our facility, we are offering our fully functional, double mixing system for sale. This system was used until recently in active production. It was primarily used for the manufacture of high-quality epoxy resin systems. Scope of the offer (package sale): 1x Vacuum double planetary mixer (consisting of two identical planetary mixers) 4x Mixing vessels (compatible with the system) 1x Dispensing device Technical data: Manufacturer: Herbst Maschinenbau Model: HRV-S400DP Ksdpfx Aszv Rqpeg Asdu Machine type: Vacuum double planetary mixer Last application: Production of epoxy resin systems Container volume: 320 l depending on the material / 400 l container total volume Drive power / connection values: see TDS in the appendix Condition & History: Used, fully functional, shows typical signs of wear and tear due to age and use. Processing, inspection & dismantling: Possible on short notice after prior arrangement. Availability: Immediately. Dismantling & removal: To be carried out independently by the buyer after prior consultation on site. Additional documents: Operating manual If you are interested or have any questions, please do not hesitate to contact us!

Year of construction: 2014, condition: good (used), functionality: fully functional, overall weight: 3,000 kg, total length: 4,760 mm, total width: 3,115 mm, total height: 2,360 mm, number of previous owners: 1, input frequency: 50 Hz, control voltage: 230 V, conveyor belt width: 2,000 mm, machine/vehicle number: F.24444.11.07.01, Equipment: 3rd hydraulic function, We are pleased to offer you the unique opportunity to purchase immediately available, single-station special machines. These are two single-station forming systems from the premium manufacturer FRIMO. They were used in the automotive sector and were in production until recently. Kdjdpozrg I Asfx Ag Aeu The systems feature forming functions, shuttle handling for part transfer via the upper tool, multiple punching units on the lower tool, and automatic removal of the produced components to the rear via a conveyor belt. These are machines that are being returned due to the closure of a factory. The systems are currently located at the FRIMO plant in 83395 Freilassing and can be inspected at any time.

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 02-2026, total width: 2,100 mm, total length: 2,100 mm, total height: 900 mm, overall weight: 800 kg, operating pressure: 60 bar, table height: 770 mm, Work table with pivoting mechanism AWT-250 S – easily bring components to the desired working height with head pressure, without any force, and tilt and rotate them using the integrated pivoting mechanism. Design: electro-hydraulic, Schuko plug 230V, controlled via hand buttons for up/down, lifting – lowering – pivoting. Mounting and pivoting of large and bulky panels, frame parts, and large workpieces can be handled by one person. Max. component size 4000x3000mm, load capacity 250 kg. Working height can be continuously adjusted from approximately 770-1000mm, and the useful stroke is 230mm vertically. The center support is 160mm wide and has 2 movable infeed/outfeed rollers on each side, which are automatically retracted at the top and extended at the bottom. The 2 tiltable work surfaces are WxD: 950x2000mm, plus 3 pull-out extensions of +500mm on each side. Kdodpfx Aezwhaqeg Aeu The total horizontal working area is 2100 x 2000mm; the support surfaces are equipped with brush strips for gentle workpiece processing. In the folded position, the open angle is approximately 32° vertically.

Year of construction: 2007, condition: used, functionality: fully functional, machine/vehicle number: 301599, Rampf DC-CNC Working area: 800x400x200 mm Kedszzb Hlepfx Ag Aodu Number of components: 3 (see photos) 1 x Isocyanate 2 x Polyol Temperature control unit Complete documentation available Details upon request.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2023, We are offering this ready-to-use Cask 3 Head Fill Station filling technology, manufactured in 2023. Number of filling heads: 3 Filling capacity: 25 cans/minute Kdedpfx Aszzmfajg Aeu Hourly capacity: 63 cases/hour Dissolved oxygen level: 15 - 20 ppb Footprint dimensions: 7’ x 2.5’ Footprint area: 17.5 ft² If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: used, Fish Filleting and Heading Machine Make: VMK Model: 18 + 181 With spare parts Kdedszi Tl Njpfx Ag Aou Working order, as back from factory

Condition: used, Mixed tie rod stock Kodpezkfwmofx Ag Asdu

Condition: new, Year of construction: 2015, Storage location number: 100636087 Transport dimensions (L x W x H): 0 x 0 x 0 Ksdpjzkz Rpsfx Ag Aedu

Condition: used, Year of construction: 2019, operating hours: 5,532 h, Equipment: ABS, all wheel drive, soot filter, Finished SD2500WS PLUS T4F* weather protection canopy * Air conditioning * Seat heating * Auxiliary heater * Leveling system/cross-slope control * Automatic centralized lubrication system for paver and/or screed * Infinitely variable hydrostatic drive * Front axle is a tandem swing axle * Diesel engine Cummins QSB 6.7 - EUIV(T4f) * All-wheel drive (2 x rear wheels + 4 x front wheels) * Pave Manager 2.0 Advanced * PLC electrical system (CAN bus), ECO mode, 24 V electrical system * Wheel track stone deflector * Mixing material hopper with individual control * Hydraulic front hopper * Support rollers with shock absorption * Reversible slat conveyor with double bars and individual control of conveyor belt halves * Automatic shutdown via mechanical paddles * Hydraulic screw conveyor with height scale * Two reversible screw halves (380 mm) Kdsdpfsy T Ukdjx Ag Aeu * Ultrasonic sensors in the screw conveyor * Hydraulic screed locking * Side-mounted operator station with weather protection canopy * Variable control panel with push buttons and 7" multifunction display * Two heated Grammer comfort seats * Four LED headlights (2 x front + 2 x rear) * Dynalink Advanced - Telematics system * Hydraulic system for Pave Manager Adv. * SD2500WS THERMO with LightAssist (Paver) ----Vario screed V 5100 TV PM+* Vario screed with gas heating * Basic width 2.55 m, hydraulically extendable to 5.1 m * Compaction system: tamper and vibration * Bottom plate Hardox 500 * Hydraulic adjustment of roof profiles * Two external controls incl. leveling electronics * Leveling system Mobamatic 2+1 * FRONT WHEEL DRIVE CAN BE ACTIVATED FOR WORK ----Additional equipment and accessories* Screw 380 mm 4.42 m * Connection kit V5100/6000 * Rotating beacon * Fire extinguisher * First aid kit * Smoke extraction system * RESTRICTED SD2500WS THERMO * Hydraulic system for Pave Manager Adv. * LightAssist (Paver) * Lighting for screw conveyor * LED headlights screed left + right * 12V socket * TEMPERATURE MEASUREMENT SCREW CONVEYOR * Spray system 25L with hose * High-performance front-wheel drive * Tool set * SetAssist (Transport position) * TRUCKASSIST ADVANCED * Thermomaterial hopper * Folding material guide * Weather protection house * Hydraulic oil drain hose * STVZO - Lift axle * Infrared temperature measurement preparation * Operating manual + parts list (USB) * Operating manual * Parts list * Set of drawings A3 * Leveling system Mobamatic 2+1 * Vario screed V 5100 TV PM+ * Side guards OBT approved (G) PM * Spirit level screed * Holder for cross-slope Moba * Holder for height sensor MobaGrade 1x * Screed width measurement * LightAssist (Screed) * DYNAPLUS12 ----Vehicle number 12111 Errors and prior sale excepted.

Condition: used, Vibratory hopper, dosing hopper, storage bunker, linear vibratory feeder, sorting device Vibratory bowl feeder, spiral feeder / vibratory feeder Vibratory bowl, screw feeding with vibratory feeder for screwdriving technology Feeding system, feed device Manufacturer: MÜLLENDERS Type: MLF-G2 Year of manufacture: approx. 2000 Hopper capacity: approx. 4 liters Vibration frequency: 6000 Hz Control voltage: 24 volts DC (an external power supply is required) Mains connection: 230 volts, 50 Hz Kdsdpfx Ajy E T Dteg Aou - An external 24 VDC power supply is required for the start/stop signals (the controller does not have an internal 24 VDC power unit). - REO control unit, type Reovib RS6 439-459, for adjustable vibration speed - Stainless steel hopper, hopper open to the rear - Base frame made from aluminum profile system Required space L x W x H: 380 x 210 x 700 mm Weight: 20.5 kg Good condition

Condition: used, functionality: fully functional, Equipment: CE marking, type plate available, Used Colortronic material dosing system with control cabinet, 5x CSK 5 vacuum receivers, small mixer unit, 30 pieces of aluminium pipes – 6 m length, diameter 50 mm, bends made of stainless steel, mixing station. Ksdpey Smg Ijfx Ag Aodu

Condition: good (used), Year of construction: 2010, For Sale: Raw Material Dosing System Brand: AZO Year of manufacture: 2010 Included: - 8x dosing tank 500 liters - complete documentation - frames - load cells - dosing screws If you have any questions or comments, please feel free to contact us. Kjdpfey Spg Rsx Ag Ajdu Inspection is possible on site. Best regards, Leo Holland

Condition: used, axle configuration: 3 axles, first registration: 04/2000, color: other, Year of construction: 2000, Empty weight: 4.760 kg Axle 1: left 8 mm right 8 mm Axle 2: left 6 mm right 6 mm Kedpfxozi Dnho Ag Aodu Axle 3: left 6 mm right 6 mm We have the possibility to stack trailers!

Condition: used, Mixing tank with two different agitators. Capacity approx. 20 hl Additional title: Vertical stainless steel container with two agitators Content: 2000 l Kdsdpjzgc Arofx Ag Aou Length: 1500 mm Width: 1500 mm Height: 2200 mm Material: stainless steel Position: free standing Base construction: Cylindrical container with flat lid Features: 2 top-entry agitators, hinged lid, side outlet

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 12349, Sack tip station / Bag dump station with dust collector powered by an integral fan with reverse jet filter cleaning of filtration cartridges. Kodpfx Agezf Nhfs Aodu

Condition: used, Year of construction: 2013, 3D-Venjakob Perfect Air Jet painting line: - Manufacturer: Venjakob - Year of construction: 2013 - Working width: 1.300mm - Max. part length 6.500mm - In U-shape with angle transfer Consisting of: 1. loading belt, length 3,050mm 2. free space für Sanding machine (only optional, not included in the price) 3. spraying machine VEN SPRAY PERFECT, length 5.510mm 4. flash-off dryer OIR, length 6,000mm 5. nozzle dryer VEN DRY AIR JET, length 4,160mm Kdodpfjzf N Nijx Ag Aou 6. angle transfer 180 degrees, with nozzle dryer 7. nozzle dryer VEN DRY AIR JET, length 5,160mm 4pcs. IR tubes 8. nozzle dryer VEN DRY AIR JET, length 5,160mm 4pcs. IR tubes 9. nozzle dryer VEN DRY AIR JET, length 5.160mm 4 pcs, IR tubes 10. 3D UV dryer, VEN DRY UV, GA + HG 11. removal area, belt of the UV dryer Further information: On request

Condition: used, Weger filling machine, weighing machine, vibrating chute Kdedpfezh Nn Rsx Ag Aou Entirely made of stainless steel Includes a small weighing scale up to 6 kg Can optionally be expanded to handle weights up to +/- 50 kg (operation of load cells unknown) Complete with weighing control system See our other listings.

Year of construction: 2021, condition: ready for operation (used), functionality: fully functional, EV Car Motor Assembly and Testing Line (2021) Designed to produce EV motors in the power range of 180–300 kW Including manual, semi-automated, and automated operations Cycle time: 86s Stations and Equipment Component loading - KUKA KR15 R2700-2/FLR robot (2021) - Material infeed - Inner housing heating with induction coil up to 240 °C - Stator pressing into housing - 1T TOX press - Keyence CA-DQP25X - Cooling tunnel - Cooldown to 24 °C - Cycle time: 600 s X-ring and D-ring inner housing assembly - X-ring and D-ring seal insertion into housing - Dedicated round assembly tool available Outer housing pre-assembly - Flange screw into housing with Bosch Rexroth ESA013G-G0 screwdriver - Automatic inner and outer housing joining Outer housing assembly - 3T TOX EQK 030 press Kdedpfx Ajzhub Ajg Aou - 2x Cognex scanners - 2x Keyence Camera V3 - 3x VS camera systems Rotor magnetization and measurement - Magnet magnetization - MagSys magnetizer MC3K82 (2020) - Magnetizing fixture MFFer8/160/250 A-shield pre-assembly and rotor insertion - Rotor bearing and resolver pressing - 3T TOX press A-shield assembly into outer housing - 1T TOX EQK press - A-shield screwing into outer housing with pneumatic screwdriver (5 Nm) Mounted component fastening - Fastening with 4GE59 Rexroth screwdriver - Manipulator system Handyflex 400 Inter-connector connection - Manual mounting of inter-connector and insulating tube Counter ring insertion, cooling cover, and vent assembly - 3T TOX EQK 030 press Rotor cooling cover mounting - Screwing with 4 Nm End-of-line (EOL) electrical testing loop - 5x Deutronic testers, including: - ETL ATS 400 high-voltage testers - HIOKI RM3545 resistance testers - Reilhofer EOL analyzers Inter-connector disconnection station - Disconnection of the inter-connector - Insertion of 2 screws and screwing with Rexroth screwdriver (13 Nm) - Manipulator system Handyflex 300 - Washer control - Motor rotation Leak testing - 2x Leak test stations with Innomatec LTC-902 testers - Vacuum and overpressure leak tests - Tested quantity: approx. 50,000 pcs per test station Rotation, laser marking, stamping, engraving, and inspection - ADT stamping machine - Arex Laser 450 - Keyence CA-H camera system - Datalogic CBX 100 reader - Tested quantity: approx. 130,000 pcs Transportation protection - Yellow transportation cover/cap and plug assembly - Manual insertion of caps and hole securing Packaging and final inspection - Dalmec manipulator (2022)

Condition: used, Year of construction: 1944, functionality: fully functional, For sale: an industrial packaging machine with a dosing system, designed for the mechanical dosing and packaging of products. The machine features a robust, heavy-duty industrial construction and an extensive mechanical working system. It is equipped with a large hopper and mechanisms responsible for dosing, feeding, and packaging the product. Equipment and construction: large hopper/feed bin, mechanical dosing system, product feeding system, mechanical packaging system, electric drive, gears and drive transmission system, adjustable working elements, mechanical cycle counter, electric control, emergency safety switch, sturdy steel industrial construction. The machine can be used for packaging bulk and granular products after appropriate adjustment and adaptation to the specific product and packaging. Machine condition: The machine is used and is in the condition shown in the current photos. There are signs of use typical for an industrial machine, including scuffs on the paintwork and localized traces of corrosion. The machine is complete as shown in the photographs and is currently on a pallet, prepared for transport. Due to the age and nature of the device, we recommend a personal inspection and testing of the machine for its intended application before purchase. Sales conditions: Selling price: 15,000 EUR The following are possible: inspection of the machine before purchase, provision of additional information about the device, Kdsdpfxjzulk Us Ag Asu agreement on the details of loading and collection. The machine is available immediately. We invite individuals and companies interested in purchasing an industrial packaging machine to contact us.

Condition: used, Nita hygiene station -Functions: shoe soles cleaning and disinfection, hand disinfection -External dimensions: 1780 x 930 x 1700 mm -With two brushes -Brush dimensions: 940 x 150 mm (x2) -The gate opens automatically after disinfecting both hands -Easy to install Kdodpfx Aoz A Rureg Aou -Stock quantity: 1 -Condition: Used in very good condition, ready to work

Condition: used, Nita hygiene station -Functions: sole cleaning and disinfection, hand disinfection -External dimensions: 2100 x 1210 x 1200 mm, 950 x 1200 x 1380 mm -With two brushes -Brush dimensions: 940 x 150 mm (x2) -The gate opens automatically after disinfecting both hands -Easy to install -Stock quantity: 1 Kdedpez A Ru Sofx Ag Aou -Condition: Used in very good condition, ready to work

Condition: used, Year of construction: 2011, Gorreri DVG 500 dispensing unit Year of manufacture: 2011 Condition: functional Kjdoz A Sa Aepfx Ag Aedu Suitable for filling, dispensing, or decorating various types of products made from doughs, creams, jams, and other liquid products. Performance: max. 40 cycles per minute Compressed air: 250 l/min (6 bar) Dimensions L x W x H: 1200 x 600 x 1850 mm Weight: 80 kg