Used Durma Hydraulic Guillotine Shear for sale (17,559)

Condition: used, Year of construction: 1994, Max. Cutting length: 3040 mm Max. sheet thickness: 6 mm steel Controlled back stop up to 1000 mm Side stops and table extensions Hydraulic shear angle adjustment cutting length limitation Bodpfxez Et Slo Ahmoln Cutting edge lighting knife sharpened Weight approx. 6500 kg

Condition: new, sheet width 4100 mm plate thickness 10,0 mm thickness at "Niro-steel" 6,0 mm down holder 28 Stück no. of strokes 18 Hub/min oil volume 260 ltr. cutting angle 0,5 - 2 ° control CYBELEC Cybtouch engine output 22,0 kW back stop - adjustable 1000 mm range L-W-H 6100 x 2580 x 2460 mm weight 15.100 kg. Blsdpfx Ahoxabwuemjn ----- electr. / hydraulic CNC guillotine shears - guided by a backdrop * with CYBELEC CNC touch screen control * with electr. / hydr. Cutting gap and cutting angle adjustment ----- Furnishing: - CNC guillotine guillotine shears - with electr. / hydr. Cutting gap and cutting angle adjustment - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. Can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball rollers in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German including special equipment: - pneumatic sheet metal holding device * Monoblock design

Condition: used, Year of construction: 1982, sheet width - max. 1255 mm plate thickness 4.0 mm ST plate thickness 2.0 mm VA plate thickness 6.0 mm ALU number of strokes - loaded ~ 66 Hübe/min. cutting angle 1.5 ° back stop - adjustable max. ~ 1.000 mm total power requirement 5.5 kW weight of the machine ca. 2600 kg. Blodpfexaa I Ssx Ahmsn range L-W-H 1750 x 1800 x 1800 mm Machine from a technical college - prototype construction very well-maintained condition (!!) Furnishing: - electro-hydraulic guillotine shears - manual backgauge with analogue position display (scale + magnifying glass) - electrical cutting length limitation - manual cutting gap adjustment - 1x extra long side stop - 2x extra long support arms - 1x free moving footswitch - rear sheet metal slide - User manual (PDF) * Machine link : ?machineno=1008-9325278

Condition: used, Year of construction: 1995, Technical details: sheet width: 3000 mm plate thickness: 12 mm distance between columns: 3500 mm control: Cybelec DNC 10 G back gauge: 1200 motorisch mm cutting angle: 1,2 - 2,73 ° cutting gap adjustment: ja mm cutting capacity : 66.000 daN daN Knife length: 3100 mm down holder: 17 Stück Bjdpjvc Amtofx Ahmeln interface: RS232 Table dimensions: 3200 x 600 mm total connected load: 22 kW weight of the machine ca.: 11,0 + (1,0 to Anbauteile+Zubehör) t space requirements approx. LxWxH: ca. 4,5 x 2,6 x 2,1 m transport dimensions LxWxH: ca. 5,0 x 2,25 x 2,2 m The guillotine shear was put into operation for the first time in 1998. The DNC 10 G control unit was specially designed for guillotine shears. It has a numerical axis for controlling the backgauge and automatically calculates and regulates the cutting gap, the cutting angle and the cutting depth, taking into account the material to be cut. (Data from the manufacturer) Table with side stopL:930 x W:105 x H:42 mm 2 table extensions L:1600 x W:100 x 83 mm Angle fence (attached to table extension) Operation via control panel with swivel arm and foot control Equipment: Drain with rollers for clippings 2x protective grid *

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1987, machine/vehicle number: 40260, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, working width: 3,150 mm, cutting angle (max.): 2 °, stroke rate (min.): 1 1/min, stroke rate (max.): 25 1/min, sheet thickness (max.): 25 mm, sheet thickness aluminum (max.): 30 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 18 mm, back gauge adjustment: manual, back gauge: 1,000 mm, input voltage: 380 V, input current: 93 A, type of input current: three-phase, control voltage: 110 V, overall weight: 42,100 kg, total length: 5,040 mm, total width: 3,150 mm, total height: 3,600 mm, table width: 3,250 mm, Equipment: centralized greasing system, documentation/manual, finger protection, foot remote control, type plate available, Used ERFURT ScTP 25/3150 hydraulic guillotine for sale, manufactured by VEB Kombinat Umformtechnik Erfurt, Germany / GDR. Bodpfx Aozh Dtzshmsln The machine is in working condition and is located at an HMC production facility in Plovdiv. Complete technical documentation is available in German and Russian – passport, acceptance reports, electrical reports, electrical diagrams, technical drawings, and a transportation specification. Key data: Maximum cutting length: 3150 mm. Maximum cutting thickness: 25 mm for St 42 / 42–52 kp/mm². Capacity for St 50 – 23 mm, for St 60 – 21 mm, for St 70 – 19 mm. Cutting angle: 2.5°. Distance between columns: 3250 mm. Rear stop adjustable up to 1000 mm. Main motor: 40 kW, connected power: 42 kW. Power supply: 3 × 380 V, 50 Hz. Machine number according to the nameplate: 40260. The machine features conventional electromechanical control, a hydraulic clamping system, a cutting line indicator, an electrically and manually adjustable rear stop, four-edge cutting blades, and an electrical cabinet. Net weight according to the transportation specification: 41,500 kg. Gross weight: 42,100 kg. Dimensions of the main machine body: 5040 × 3040 × 2970 mm. Price: negotiable. Location: Plovdiv, Bulgaria. Inspection by prior arrangement.

Year of construction: 1988, condition: used, Bombled Guillotine Shear – 3006 mm Manufacturer Bombled Industrie – France Type Motorized guillotine shear – CAFRA model Bsdpfxsupkkps Ahmoln Industrial Applications Sheet metal cutting in boiler making, metal workshops, industrial maintenance, fabrication lines, and metal forming operations. Main Technical Specifications: - Max cutting length: 3050 mm - Model: 3006 - Type: CAFRA - Commissioned: circa 1987 - Actuation: motorized (electromechanical or hydraulic depending on version) - Heavy-duty monobloc frame - Side-mounted control panel - Angled scrap conveyor for cut parts 🧩 Machine Usage The Bombled 3006 shear enables accurate and repeatable cutting of sheet metal up to 3 meters wide. Designed for intensive use, it fits perfectly in fabrication or sheet processing workshops. ⚙️ Features / Differentiators - Above-average cutting length (3050 mm) - Heavy frame ensures stable, vibration-free cutting - Proven French design meeting 1980s safety standards - Adaptable for various sheet thicknesses depending on configuration

Condition: good (used), functionality: fully functional, Year of construction: 1993, sheet thickness steel (max.): 13 mm, back gauge: 1,000 mm, cutting length (max.): 3,050 mm, motorized limit stop cutting crack adjustment cutting angle adjustment foot switch Technische Daten / technical details: Schnittlänge / max. cutting length 3050 mm Schnittleistung / cutting capacity 13 mm Hinteranschlag / limit stop 1000 mm Antriebsleistung Motor/ drive capacity motor 22 kW Gewicht der Maschine ca. / weight 8000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. Bjdpfsv Tk Efjx Ahmoln

Condition: excellent (used), Ideal/EBA cutting machine! In excellent condition, available for inspection and testing at our location. All the equipment mentioned is not for sale or resale in Russia, or in any country subject to an EU embargo. Blodey Uhlqepfx Ahmen

Condition: like new (used), Year of construction: 2023, operating hours: 1 h, actuation type: manual, working width: 2,030 mm, back gauge: 750 mm, Equipment: documentation/manual, type plate available, Panel shear, like new, unused. The machine was delivered by Schröder in January 2023 and put into operation. Since it was unsuitable for the intended application (see photos), it was subsequently stored and is in absolutely new condition. The new price was €12,381 (excluding transport + assembly). Manufacturer: SCHRÖDER Type: HS 2000 x 1.25 Year of manufacture: 2023 Usable length: 2,030 mm Cutting capacity at 400 N/mm2: 1.25 mm Equipment: Blodezl A Raepfx Ahmen - Rear stop 750 mm, digital display, adjustable at the front - Hold-down device 750 mm - Stainless steel blade - Clamping beam with hard rubber strip - Front support table, extendable - Angle stop right + left - Sliding carriage

Condition: good (used), functionality: fully functional, Year of construction: 2000, sheet thickness steel (max.): 16 mm, back gauge: 1,000 mm, cutting length (max.): 3,150 mm, foot switch motorized arrester behind cutting angle adjustment Technische Daten / technical details: Schnittleistung / max. cutting capacity 16 mm max. Schnittlänge / max. cutting length 3150 mm Bodpfx Ajv Syyvehmjln Anschlag / limit stop 1000 mm Gewicht der Maschine / weight 16300 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Year of construction: 1985, sheet width 3100 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.5 mm cutting angle adjustment 1.0 ° back stop - adjustable 10 - 1000 mm adjustment speed 180 mm/s down holder 21 Stück strokes per minute 18 - 31 oil volume 160 L Bledpfoxab Tvjx Ahmjn Control ELGO P8511 column arm 200 mm distance between columns 3050 mm 0 max. 300 bar voltage 400 V main drive 9.0 kW weight of the machine ca. 4800 kg. dimensions of the machine ca. 3660 x 2070 x 2140 mm from a maintenance workshop Equipment: - electro-hydraulic sheet metal shear "swing cut" - machine frame = all-steel welded construction - ELGO NC control model P8511, control panel at the front left * for positioning the electro-motoric rear stop * target/actual position value input possible * adjustment by three-phase motor via toothed belt - support table with ball rollers * there are recessed grips between the table plates - front finger guard - hydraulically acting sheet metal hold-down device - 1x freely movable foot switch - emergency stop button at the front - movable scrap switch - original operating instructions + circuit diagram Special accessories included: - EHT pneumatic sheet metal holding device for thin sheet metal cuts - 1x EHT extra long side stop 3.000 mm with mm scale & support foot - 1x EHT extra long support arm with 3.000 mm with scale & Support foot - EHT additional support arms with mm scale

Condition: good (used), Code: 0193 Brand: CASATI MACCHINE Model: BIG 3200 - CE Standard Hydraulic two knives veneer pack guillotine shear - CE Standard Description: Sturdy steel made structure, cast iron knife beam. Self-lubrificating prismatic slide-ways The machine allows, with a single operation, to cut the veneer pack on both sides to be trimmed - The simultaneous trimming on two sides of the veneer pack is carried out thanks to the movement at the same time, of two knives, one fitted on a fixed structure and the other one on a moving part - The machine is equipped with an adjustable rear shoulder, as well as with a pressor to clamp the veneer pack during cutting operations. Bljdpeqzky Esfx Ahmon Possibility of working as a single guillotine shear Useful cutting length (as double guillotine shear) mm 3200 Useful cutting length (as single guillotine shear) mm 3550 Pressore stroke mm 100 Pressor width mm 550 Min width to be cut mm 18 Max width to be cut mm 530 Scrap adjustment field mm 0/50 Photoelectric cells Electronic programmer allowing to program the number of cuts to be effectuated and the relevant width Perimeter protections Total power installed Kw 13, 9 Operating pressure bar 6/7 Overall dimensions mm 5200 x 1700 x 1800 h Weight kg 9000

Condition: good (used), Year of construction: 1978, machine/vehicle number: 11.542, Offer 24559 Bljdovmmruspfx Ahmen Technical data: - max. working width 1100 mm - max. cutting performance - at 400 N/m² strength 20 mm - cutting angle 1 ° 30 ` - cutting gap adjustment via hand lever - number of hydraulic hold-downs 7 pcs - manual back stop 10 - 1000 mm - front angle stop - front support arms - stroke rate 13 per/min - drive 400 V / 45 kW - table height 700 mm - space requirement including back stop, without front support arm - approx. W 2100 x H 2250 x D 2250 mm - weight approx. 7500 kg - with: - electric foot switch - cutting line lighting

Condition: good (used), Year of construction: 2010, sheet width 4100 mm plate thickness 6.35 mm thickness at "Niro-steel" 4.00 mm cutting angle 0.5 - 2.5 ° cutting gap adjustment 0.05 - 0.8 mm no. of strokes 9 - 26 Hub/min back stop - adjustable 10.0 - 750 mm down holder 22 Stk. oil volume 200 ltr. engine output 7.5 kW weight 8000 kg. range L-W-H 5145 x 2200 x 1750 mm From a maintenance workshop Very well-maintained / good condition With very few operating hours (!!) Current list price approx. 60.000 euros Special price upon request Features: - Robust electro-hydraulic, slide-guided sheet metal shear - LVD control panel centrally located on the front of the machine (left) - Electro-hydraulic cutting angle adjustment * Includes digital display of actual values - Manual cutting gap adjustment Bledpfxezcqy So Ahmen * via handwheel from the front (left) * Includes analog value display - Electro-motorized backgauge with ball screws * Includes digital actual position display * Rapid traverse is possible - 1x extra-long side stop 3,000 mm, with support foot - 1x long support arm - Ball-bearing recessed handles in the support table - Front finger guard - Rear sheet metal chute - Safety device - rear (protective grille) - 1x freely movable foot switch - Machine lighting at the front (custom-built) - Operating instructions

Year of construction: 1973, condition: good (used), guillotine shear with rear stop and stacker Bedpfegnywuex Ahmsln design: pendulum cut cutting length: 3.050 mm plate width: 1.000 mm plate thickness: 4,5 mm

Condition: excellent (used), functionality: fully functional, Capacity 1000 x 3.5 mm - 55 strokes/min - electric foot switch Blsdpfx Aoz Ict Rjhmsn - left side stop 600 mm, two supports of 600 mm each - central lubrication - Ortlinghaus brake-clutch combination - switchable between high-hold position and tilting roller table - rear safety by light curtain

Condition: used, functionality: fully functional, Year of construction: 1969, machine/vehicle number: 506/10/2,5, control type: CNC control, degree of automation: manual, actuation type: hydraulic, working width: 1,030 mm, sheet thickness (max.): 2 mm, sheet thickness steel (max.): 2 mm, input voltage: 380 V, input current: 13 A, input frequency: 50 Hz, control voltage: 220 V, Used Fasti guillotine shear, model 506/10/2.5, year of manufacture 1969 Bodpoy Hhiajfx Ahmsln

Condition: used, Year of construction: 2008, sheet width 3050 mm plate thickness 30.0 mm Bljdpfx Ajzkvx Iehmsn column arm 100 mm cutting angle 1,5° - 3,5° adjustment speed max. 200 mm/s weight 36.000 kg dimensions 4700 x 3535 x 2980 mm

Condition: used, functionality: fully functional, Year of construction: 1984, Equipment: documentation/manual, type plate available, Crank-driven plate shear Manufacturer: Fasti, Type: 507 – 20 - 3 Year of manufacture: 1984 Technical data Manufacturer: FASTI Type: 507 – 20 - 3 Year of manufacture: 1984 Sheet metal width: 2040 mm Sheet metal thickness: 3.00 mm Overhang on the stand: 100 mm Number of strokes: 65 Motor power: 7.5 kW Dimensions: L 2.65 x W 1.20 (plus 0.8 m support arms) x H 1.3 m Weight: 2.1 t Equipment - Rear stop, 500 mm, manually adjustable - Adjustable clamping pressure Blsdpfxozpxdqe Ahmon - Angle stop - Support arms - Manual adjustment of the cutting clearance!!! - 4 x spare blades (2 x top blades / 2 x bottom blades) - Documentation All information is subject to change without notice. A demonstration is possible at any time in our showroom.

Condition: good (used), Year of construction: 1982, machine/vehicle number: 11.809, Offer 25079 Technical specifications: - Max. working width 3100 mm - Max. cutting capacity - at 400 N/m² strength 13 mm - at 700 N/m² strength 10 mm Blsdpov Nkdmsfx Ahmon - Cutting angle 1° 30' - Cutting gap adjustment via hand lever - Number of hydraulic hold-down clamps: 14 - Motorized backgauge - Electric foot switch - Front angle stop - Stroke rate 15 per minute - Drive 380 V / 22 kW - Table height 800 mm - Space required including backgauge, without front support arms - Approx. W 3400 x H 2250 x D 2150 mm - Weight approx. 12000 kg

Condition: used, Year of construction: 1997, sheet width 3100 mm plate thickness 6.35 mm Bledpfx Aey I Dbbshmjn thickness at "Niro-steel" 4.00 mm cutting angle 0.5 - 2.5 ° cutting gap adjustment 0.05 - 0.8 mm no. of strokes 12 - 50 Hub/min back stop - adjustable 1000 mm Control DELEM DAC 360 oil volume 120 ltr. engine output 9.5 kW weight 7000 kg. range L-W-H 3950 x 1950 x 1680 mm well-maintained condition (!!) equipped with new DELEM control unit Equipment: - electro-hydraulic, guided plate shear - DELEM CNC control unit type DAC 360 * front control panel, swiveling front left - Electro-hydraulic cutting angle adjustment - Electro-hydraulic cutting gap adjustment - electro-motorized backgauge, with ball screws - 1x extra-long side fence with T-slot mm scale

Condition: used, Year of construction: 1983, Hydraulic Shear HACO HS 3010 Capacity: 3000 x 10 mm Back gear gauge travel: 1000 mm Year of construction: 1983 Manual adjustment of the clearance between blades Blodezwcncopfx Ahmjn Cutting angle: 1° to 3° Voltage: 380 V Dimensions (L x W x H): 4000 x 2100 x 2200 mm Weight: approx 8 T

Condition: used, Year of construction: 2022, sheet width 3100 mm plate thickness 10.0 mm thickness at "Niro-steel" 6.0 mm down holder 14 Stück no. of strokes 13 Hub/min cutting angle 2.0 ° throat 350 mm back stop - adjustable 1000 (+) mm oil volume 260 ltr. engine output 22.0 kW weight 10.575 kg range L-W-H 4100 x 2400 x 2170 mm Demonstration/demo machine (!!) from our exhibition (like NEW) Bljdsxab I Hepfx Ahmsn with very few operating hours ----- heavy electr. / hydraulic CNC swing cut shears * with CYBELEC CNC touch screen control * with electr. / hydr. Kerf adjustment ----- Furnishing: - CNC electr. / hydraulic swing cut shears - CYBELEC CNC touch screen controller, model CybTouch 8 * Backgauge preselection - X axis * Cutting gap adjustment * Number of pieces * Cutting length limitation * Material preselection, including sheet thickness * Cutting line lighting - motorized backgauge, travel = 1,000 mm (X axis) * on ball screws * autom. can be folded up at vel, for longer cuts - 1x side stop - 2x front support arms - Ball rollers in the front support table - hinged finger protection, with safety switch - BOSCH / HOERBIGER hydraulic system - SIEMENS electrical system - Light barrier behind the machine (safety device) - foot switch - CE mark / declaration of conformity - User manual: machine and control in German including special equipment: - pneumatic sheet metal holding device

Condition: used, Year of construction: 1994, sheet width / mm plate thickness / mm distance between columns / mm Manufacturer: EHT Type: TSS 20-25 Year of construction: 1994 Max. Cutting length: 2250 mm Max. Sheet thickness: 20 mm Strip width min / max: 10/1000 mm Distance between the consoles: 2530 Height above the ground: 900 mm Table length without extension arms: 3030 mm Oil volume: 800 l Max. Pressure: 280 bar Operating voltage: 400V Control voltage: 230 V. Nominal current: 87 A. Weight: 15.8 to Dimensions L x W x H: 3500 x 2500 x 2400 mm Accessories / special equipment Pneumatic cutting gap adjustment Cutting length limitation Roller conveyor elevation bracket Hand protection 1 bay Multitron control Multitron PS 80; ELCO 85 P Bljdeuddh Aepfx Ahmon Lower knife height adjustment

Condition: good (used), Year of construction: 2000, sheet width 3100 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.5 mm cutting angle adjustment 1.0 ° back stop - adjustable 10 - 1000 mm adjustment speed 180 mm/s down holder 21 Stück strokes per minute 18 - 31 column arm 200 mm Control ELGO P8721 oil volume 160 L 0 max. 300 bar voltage 400 V main drive 7.5 kW weight of the machine ca. 4800 kg. Bedpfx Aszycpxshmjln dimensions of the machine ca. 3660 x 2070 x 2140 mm from a maintenance workshop good condition (!!) Features: - Electro-hydraulic sheet metal shear ("swing cut") - Machine frame = all-steel welded construction - ELGO NC control system, Model P8721, control panel on the front left * for positioning the electrically driven backgauge * Target/actual position value input possible * Adjustment via three-phase motor using a toothed belt - Support table with ball bearings * Recessed handles between the table plates - Front finger guard - Hydraulic sheet metal hold-down devices - 1x side stop with mm scale - 2x front support arms with mm scale - 1x freely movable foot switch - Emergency stop button at the front - 1x movable / rear scrap deflector - Original operating instructions Special accessories included: - EHT pneumatic sheet metal holding device for thin sheet metal blanks