Used Efco Furnaces Glass Furnace for sale (4,444)

Condition: new, TECHNICAL DATA Gas-fired preheating furnace, make VEI type: VEI_KO_V_GB_400-350 Ibsdpfxjfbgz Ij An Ioc temperature: 350°C burners power: 2 x 200 kW fans: 2 x 4 kW useable dimensions x 2 (h x d x w): 1.000 x 1.400 x 2.800 mm

Condition: new, Year of construction: 2024, Drying and Burn-in Furnace TRO, Model I Iedpfx Ansd I T Exj Iebc For drying racks with max. 50rods, useable size 60x90cm, outer dimensions: approx. 2290mm wide x 1390mm deep x 2230mm high, useable space: approx. 1400x1070x1660cm. Suitable for vaporisation of low amounts of solvent, authorised for inks and solvents up to hazard class A II, according to safety requirements DIN EN 1539. Equipped with control of the minimum exhaust volume and a heating system in regard to the exceedance of the max. temperature. Fixing and drying temperature: up to max. 180°C. Power connection: 400V/50Hz, 21kW, weight: approx. 650kg, varnishing: corps RAL 7035 (light grey), doors RAL 7037 (dust grey). Special varnishing upon request. Chamber dryer, all-steel construction, with good thermal insulation. Simple insertion of drying racks by means of easy-to-open wing doors. The air is sucked out of the drying chamber by ventilators, is blown through thermostat-controlled heating registers and re-fed temperature-controlled to the drying chamber. The solvents released during the drying process are dissipated from the exhaust side of the ventilator while supply air gets into the drying chamber. The horizontal air guide in the drying chamber guarantees an even temperature control. The required temperature can easile adjusted via actual and nominal value thermostat. Overheating protection by safety thermostat. Particularly suitable for fixing and drying of textile inks, flock glues as well as for burning-in of plate and aluminium signs up to 180°C. - Various drying racks for different applications available. - We recommend the installation of a gas warning unit. Delivery time 10-12 weeks. ATTENTION: Not permitted for solvents! Not permitted for foods!

Condition: good (used), Year of construction: 2011, Glass loading fork for jumbo sizes and oversized items Device for oversized glass with safety display. Max. glass size: Width: 8000 mm, height: 3400 mm. Load capacity: 5800 kg. External dimensions: Width: 5900 mm. Height: 4220 mm. Depth: 600 mm. Weight: 780 kg. Iedpfx Asxw Hrfen Isbc Condition: very good, second-hand.

Condition: refurbished (used), Year of construction: 2008, functionality: limited functionality, operating hours: 20,000 h, power: 60 kW (81.58 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, total width: 11,000 mm, total length: 12,000 mm, air pressure: 8 bar, pressure: 8 bar, Glass grinding/polishing line consisting of a loading manipulator, four-sided processing unit, and Triulzi washing machine. The equipment is dismantled and stored in a warehouse. The seller undertakes to assist with commissioning the equipment at the buyer's premises. The condition of the Busetti manipulator is as-is (very good condition). The Busetti P4 processing line has undergone a complete overhaul. The Triulzi washer has been partially refurbished. Ibjdpfx Ansxxaitj Iec

Condition: used, Year of construction: 2016, functionality: fully functional, working height: 720 mm, Equipment: documentation/manual, Insulating glass production line without automatic sealing machine Maximum pane size: 2500x1600mm Min. pane size: 250x180mm Isdpfx Aswikn Rjn Isbc Gas filling press: Models and triple available

Condition: new, functionality: fully functional, Year of construction: 2026, BEFARD XPR500 glass and sandwich panel vacuum suction cup Maximum load capacity 500 kg 1 pc. suction plate 800x400 Ibjdpov I Tcvsfx An Iec Remote contro l Single-circuit vacuum system Battery power supply Hook mounting bracket Transport trolley with wheels adapted for transport on stairs A choice of colors.

Condition: new, Year of construction: 2026, Befard glass assembly robot model XC820.3: RADIO CONTROL AS STANDARD!!! TECHNICAL SPECIFICATION: • Lifting capacity 820 kg • Three hydraulic extensions giving a vertical reach of approx. 5.7 m - available models with a reach of 3.9 m and 4.8 m • 8 vacuum suction cups • Two supports - right and left side • Additional support wheels at the front - only for the XC820.3 model • Dual-circuit vacuum system • Power supply with AGM batteries • BEFARD radio control of the robot • Manually rotating frame with suction cups - locking at every 90-degree turn - hydraulic rotation for an additional fee • Side shift of the frame with suction cups (right, left 10 cm - hydraulic) • Tilting frame with suction cups to the sides (relative to the device - manual) -- hydraulic rotation for an additional fee • Tilting frame with suction cups (can be lifted element from the horizontal plane and hydraulically verticalizing it) ADDITIONAL OPTIONS: • HS spacers • twin wheels • filled wheels • valves • hook • hydraulic frame rotation with suction cups • hydraulic frame tilt to the sides with suction cups • forks • LED lamp • narrowing the width to 78 cm • anti-overload system Ibjdpfxsv I Ut Nj An Iec Own weight - approx. 1000 kg Possibility to choose the color

Condition: used, Manufacturer: DEMAK Housing size: 6600 x 2100 mm Maximum temperature: 200 °C In the past, the oven was part of a plant and the product was transported via a conveyor belt, Ibjdpfxsvgy Ivs An Iec The oven was previously controlled by PLC, it was dismantled,

Condition: good (used), • Facet grinding machine • Year of manufacture 1990 Iedpfjvxthtsx An Iebc • Comes from ongoing production • More information on request

Condition: ready for operation (used), Year of construction: 2000, functionality: unexamined, machine/vehicle number: 520-003956, Lisec spacer bender Printer for spacers not available Iedsvktytepfx An Isbc

Condition: used, Year of construction: 2018, Overview The ABE GLASSPAK 66 is an isobaric filler that is currently in operation and can be viewed. The machine was manufactured by American Beer Equipment (ABE) in the USA in 2018. It has a maximum output of 4,000 bottles per hour for 0.33-liter bottles. The system is designed for 26 mm crown corks and has 18 filling stations. Technical details  - Output: 4,000 bottles/hour (for 0.33-liter bottles) - Type of closure: 26 mm crown cork - Formats: 0.33L - Filling stations: 18 Isdpfx Aevpi Abjn Ijbc - Electrical specifications: - Max. Voltage: 208-240 V - Total current draw: 38.5 A - Maximum motor current: 10.6 A - Phase: 3-phase - Frequency: 60 Hz

Condition: defective spare-parts repository (used), Stainless steel housing for a vacuum furnace with a heating chamber made of molybdenum. Iodpfovrh Iuox An Ijbc Chamber size: 600 mm x 600 mm x 900 mm Internal diameter of the working chamber: 1,000 mm External diameter of the working chamber: 1,280 mm External diameter of the vessel (without flange): 1,450 mm Height without wooden pallet: 1,900 mm Height with wooden pallet: 2,100 mm Width: 1,900 mm Length: 1,900 mm Weight with wooden pallet: 1,750 kg Inspection by appointment is possible at any time.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: GG520A-19388, total width: 5,272 mm, total length: 12,500 mm, total height: 1,500 mm, overall weight: 5,300 kg, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, pressure: 8 bar, Bottero 520LAMe-37: Automatic machine for cutting, breaking, and separating laminated glass, model SN GG520A-19388, manufactured in 2011. Automatic positioning based on optimization, automatic blade, 2 independent heating sections, 20mm trimming, laser device for positioning diagonal cuts. Max cutting length 3700mm, max speed 100m/min, min glass thickness 2/2mm and max 8/8mm. Ibodpfxjxg Nxyo An Ioc Includes: New felt (5mm) on the unloading table, air tubes have been replaced, and the 520 LAMe-37 has undergone servicing.

Condition: used, This listing is for the Smeg GW1160 Glassware Washer The unit is in full working condition and is ready for immediate use Smeg GW1160 Glassware Washer – Overview The Smeg GW1160 is a compact, high-performance laboratory glassware washer engineered for precision cleaning, thermal disinfection, and drying of laboratory glassware. It’s particularly suitable for critical cleaning applications in biotechnology, pharmaceutical, and research labs. Key Features Ibodpoxhgd Nefx An Ijc Washing Temperature: Up to 95°C for thermal disinfection. Microprocessor Control: Programmable electronic control system with 9 default programs and 6 customizable (free) programs. RS232 Serial Port: Enables data logging or printer/PC connection for traceability. Active Thermodynamic Drying: Ensures fast and thorough drying of internal surfaces. High-Efficiency Ecoslim Steam Condenser: With cold water injection for effective drying and steam management. Chemical Dispensing: Alkaline powder detergent dispenser. Peristaltic pump for acid liquid neutralizer. Two additional peristaltic pumps can be installed. Washing Chamber: Made of AISI 316L stainless steel for corrosion resistance and hygiene. External Panels: Constructed from AISI 304 stainless steel. Two Independent Washing Levels: Accessible via telescopic guides, suitable for various glassware sizes. Built-in Water Softener: With salt sensor to optimize cleaning and prevent scaling. Dual Water Connections: Compatible with cold water and demineralized water. Technical Specifications External Dimensions (W x D x H): 600 x 605 x 850 mm Internal Chamber Dimensions (W x D x H): 525 x 490 x 570 mm Weight: ~74 kg Electrical Options: 400V (3-phase, 7.0 kW) 230V (single-phase, 2.8 kW)

Condition: excellent (used), Mesh belt continuous furnace CIEFFE type: FNC procedure: tempering, carbonitriding, case hardening lenght: appr. 52 m belt (H x w x d): 25 X 930 X 9300 mm production output: 80-1000Kg/ h connected load: 170kW (HTO) + 35kW (wash) + 135kW (tempering) Heating capacity of natural gas: 768kW (annealing furnace) + 643kW (tempering furnace) Ijdpfexpuahjx An Iebc annealing furnace: Belt speed: 20 -172 mm/min max. temperature: 910°C temperature uniformity: ± 7°C (area 1-3), ± 5°C (area 4-6) washing machine: wide conveyor belt: 1000 mm washing sink: 1800 lt rising tank: 1200 lt quantity per hourly production: 700dm3/h tempering furnace: belt speed: 60 - 234 mm/min max. temperature: 650°C temperature uniformity: ± 5°C (150-600°C)

Condition: used, • Machine No.: 2529 • Year of manufacture: 2021 • Automatic positioning stops for length adjustment • CNC control system with operator guidance via monitor • Integrated cutting plan display Ibodpfx Ajw Uptzsn Ijc • 2 special cutting heads for laminated glass (VSG) cutting • Lower cutting head can be deactivated for float glass cutting • Automatic cutting oil supply for both upper and lower cutting heads • Cutting oil canister with fill level monitoring • Automatic breaking roller for opening the lower cut • Lowerable take-off table for opening the upper cut • Separation device with hold-downs, also suitable for LOW-E coated glasses • Continuous special heating element beneath, swiveling • Thermal-mechanical separation device for dividing multiple interlayers • Cut line marking for diagonal cuts by visible laser • Glass flow direction: right to left • Maximum cutting length VSG: 3700 mm • Maximum glass size: 6100 mm x 3210 mm • VSG glass thickness: 2x3 to 2x8 mm • Interlayer thickness: 0.38 to 3.8 mm • Working height: 940 mm +/- 20 mm • Cutting speed: 90 m/min • Cutting accuracy: +/- 0.5 mm • Length alignment: 25 mm to 3700 mm • Automatic length alignment: min. 230 mm x 800 mm • Operator-side turning device • Price on request

Condition: used, Year of construction: 2020, Sehr kompakt gebautes Wasserkühlgerät / Very compactly built Watercooled Chiller Kühlgerät / Chiller ef cooling Ernst H. Furrer EVO 60 Typ WKL 520 Wasserkühlgerät / Watercooled Chiller Baujahr / Year 2020 - Serial-No. 0520.008/36732 Kälteleistung / Cooling capacity 60kW Ijdpjxlkg Ajfx An Iobc Kondensationsleistung / Condensation performance 84kW Anzahl Kältekreisläufe 1 / Number of refrigeration circuits 1 Kältemittel je Kältekreislauf / Refrigerant per refrigeration circuit R410A, 4.4kg 2 Verdichter / Compressor Pumpe / Pump CM 10-5 Grundfos Wärmetauscher / Heat exchanger  Technische Dimensions: Length / Width / High 1800 x 850 x 2153mm Gewicht / Weight 640kgs Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, functionality: unexamined, machine/vehicle number: ABMC-1, input voltage: 380 V, Used Mitsuboshi Diamond Industrial glass breaking machine. Model: ABMC-1 Isdpsxmhqzjfx An Iebc Manufacturer: Mitsuboshi Diamond Industrial CO., LTD. Voltage: 380V (50Hz)

Year of construction: 2026, operating hours: 1 h, condition: new, functionality: fully functional, machine/vehicle number: Mzvbf01, Equipment: CE marking, Automatic vial bottle filling machine.this machine type normally customized by the customer vial bottle type and requirement of the production .It widely used for the pharmaceuticals and industry. Filling and Capping: The process involves automatic bottle loading, automatic capping, automatic filling, automatic capping, and bottle discharging, all completed without human contact. It employs a peristaltic pump for filling and a servo control system; the equipment's transmission is fully servo-controlled. The capping torque is adjustable. The equipment is equipped with a buffer tank and a weighing function (Mettler-Toledo electronic scale) to control the liquid level by weight. It also features a magnetic stirring function. Isdpfx Anjx Tg Tqo Ijbc All parts in contact with materials are made of 316L stainless steel, conforming to GMP standards.

Condition: good (used), Year of construction: 2008, 10 cup wheels vertical glass edging machine with variable angle 0-45° total number of woreking meters : 179.000 min. glass size height : 70 mm Ibodsx Hvxpopfx An Ijc speed : 0,5 - 5 m/min. glass thikness : 3 - 50 mm machine dimensions : L x W x H : 8,8 x 1,2 x 3 m weight : 4300 Kg

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, feed length X-axis: 6,000 mm, feed length Y-axis: 3,210 mm, compressed air connection: 6 bar, cutting length (max.): 6,000 mm, Combi cutting table for cutting monolithic and laminated (VSG) glass. The entire line consists of an automatic crane, tilt table, a table for removing low-e film for both monolithic and VSG glass as well as for cutting monolithic glass, module VB-45 used for cutting VSG glass, and a table for breaking off monolithic glass as well as for removing finished pieces. For sale without crane and tilt table. Ibsdpfx Aox Tq S Don Isc

Condition: used, Year of construction: 2001, machine/vehicle number: 526/01, functionality: fully functional, operating hours: 60,000 h, input voltage: 380 V, type of input current: three-phase, feed length X-axis: 1,250 mm, Used glass drilling machine with automatic ruler. In good condition. Ibjdpfsx Rp Rgex An Isc

Condition: good (used), Year of construction: 2001, 3 axes XYZ Ibjdpfoxt E Nhjx An Iec Work table: 2500 mm x 1200 mm Grooving, drilling, milling, grinding, polishing. External dimensions of the system: Height: 2600 mm Width: 4400 mm Depth: 2700 mm

Year of construction: 1997, condition: excellent (used), functionality: fully functional, machine/vehicle number: PP120/40, Hot Wall Pulsed Plasma Nitriding Furnace (tandem with 2 bases) Control system was refurbished in 2018 Furnace Model : Plateg PP120/40 Loading Dimensions Ibjdpfx Ajwmfyven Isc Diameter : 1000 mm Height : 1250 mm Max. Load Weight : 1000 kg (gross) Plasma Power : 40 kVA Heaters Power : 3x13,5 kW, (3 zones) Electrical Connection : 400V 3 phase 50 Hz

Condition: used, heating: electrical useable space: ø400 x 400 mm temperature: max. 1.300°C ventilation: exhaust fan during the cooling phase and activated cooling fan Ibodpfxev Sbc Eo An Ioc ultimate vacuum: 10 mbar exhaustion time: ca. 5 min nitrogen: inlet pressure min. 3 bar oxygen: inlet pressure min. 3 bar