Used Emba 245 Qs Ultima for sale (1,001)

Condition: new, Year of construction: 2020, power: 380 kW (516.66 HP), fuel type: diesel, CPL: 8471 Approx. weight in kg: 835 kg Dimensions LxWxH: 120x90x115 Pedpfx Afey Am Tisgopt

Condition: used, operating hours: 12,870 h, Due to the large number of non-serious emails / Emails will not be answered Pedpfx Ajwt Ip Tofgjpt WhatsApp German machine Fully functional Ready to drive Width = 4m / Cabin height 3.75m "SUBJECT TO ERRORS, TYPOS AND PRIOR SALE"

Condition: good (used), Humidifier, Humidifir, Humidificateur, Hymidificador, Humidifier Base Board, Steam Generator Board -Manufacturer: Hygromatik, MP humidifier control display Ppsdpfxoy Awxij Afgot -Type: MP E-2522450 -Dimensions: 155/50/H95 mm -Weight: 0.3 kg

Condition: reconditioned (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 265134, warranty duration: 6 months, year of last overhaul: 2026, Equipment: type plate available, Multimatic MUS 6 WP Bakery Divider. Fully automatic machine for dividing and rounding dough. Designed for doughs with a yield (TA) of 148-160. Key features: Podpfx Ajuv Hrwofgept - Capacity: up to 12,000 pieces/hour, - Weight range: 28 - 85 g, - Number of rows: 6, - Hydraulic system for the main piston, - Condition: as new (after complete overhaul), - Hopper volume: 50 l, - Round product, - Constructed of stainless steel.

Condition: reconditioned (used), functionality: fully functional, fuel type: diesel, operation weight: 4,200 kg, Year of construction: 2021, operating hours: 1,150 h, Equipment: UVV, air conditioning, cabin, gripper hydraulics, hammer hydraulics, hydraulics, rubber tracks, Operating weight: 4,200 kg, Kubota D1803-CR-T Turbo Stage V - Tier 4 Final diesel engine, 32.8 kW/46 hp, water-cooled, Swivel arm and monobloc boom, zero tail, Psdpfjtt Dh Dox Afgept LOAD SENSING hydraulic flow sharing control block and electronically controlled load sensing pump with ECO - Standard - Power working mode, automatic speed reduction, dozer blade, rubber tracks, foldable, cushioned cab ROPS/TOPS/FOPS level 1 with heating and radio preparation, Digging depth: 3,085 mm, Powertilt PT05 Additional equipment: Air conditioning, load holding valve on blade, rear camera, Plexiglas canopy, LEDs at the front, rear and on the boom, rotating beacon, Potentiometer on AUX1, electrical switching, Powertilt

Condition: new, Year of construction: 2024, operating hours: 15 h, functionality: fully functional, total height: 2,545 mm, total width: 2,700 mm, total length: 7,510 mm, type of input current: three-phase, overall weight: 8,500 kg, input voltage: 400 V, pressure: 6 bar, power: 55 kW (74.78 HP), Application area: Paper and film processing Specialty papers (e.g. package inserts, labels, lightweight printing papers) Plastic films (e.g. sensitive or scratch-prone materials) Technology / Features: Podsy Egdtjpfx Afgjpt Contactless sheet transport using AirStream (air conveyance) Very high format flexibility and rapid job changes High cutting and register accuracy Gentle material handling, even with very light substrates Performance data (typical): Speed: up to approx. 400 m/min Substrate weights: approx. 30–300 g/m² paper Cut lengths: approx. 400–1,060 mm (optionally larger) Strengths: Ideal for small batch sizes and frequent format changes High production speed with consistently good quality Reduced waste rate and excellent stack quality Compact design and easy integration into existing lines Inspection and test run possible by arrangement Assembly and disassembly can be arranged by the manufacturer Warranty provided by the manufacturer

Condition: new, maximum load weight: 36,410 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website. Extract from the equipment. Full equipment details available on request. GOOSENECK: * Gooseneck in SNT design for optimized loading platform length, length approx. 3,700 mm, rear with taper approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Steel front wall, removable, approx. 400 mm high * ASPÖCK-UNIBOX * 3 kW electro-hydraulic power unit for hydraulic functions, excluding hydraulic winches * Approx. 40 mm thick hardwood decking above the gooseneck * 2-inch kingpin * Gooseneck guide plate for the fifth-wheel plate, approx. 500 mm wide * Bracket at the rear of the gooseneck for ALU loading ramps Ppodpfx Afsy Auh Ijgst * Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917) * 4 wheel chocks with holders in front of the front wall * 1 pair of stake pockets recessed on the gooseneck for plug-in stakes approx. 100 x 50 mm (located on the inside of the chassis rail) EQUIPMENT: * Loading platform length approx. 8,800 mm, extendable version approx. 4,100 mm, with rear taper approx. 500 mm x 10° * A recess in the loading platform, extending into the tapered section to accommodate the excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H) * Pneumatic locking with conical locking bolts and reinforced locking positions, supply lines are protected inside the extendable beams and automatically adapt to the selected loading platform length * TPMS tire pressure monitoring system in accordance with ECE R 141 * BPW axles and suspension, 1st and 2nd axles rigid, 3rd axle steered * 3rd axle with electro-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: each 12,000 kg with air suspension and raise/lower valve * 235/75 R 17.5 3PMSF twin tires. Manufacturer at our discretion * Mechanical landing legs with 2-speed gearbox and crank. JOST Module B – static test load = approx. 50,000 kg * Throughout the loading platform and between the axles, interrupted approx. 50 mm thick hardwood decking (increases coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the telescopic tube with large cross-section. Intermediate table with offset loading platform and extendable mounting rails for aluminum bridging elements * Platform locking with conically welded locking profiles every approx. 250 mm. Includes pre-tensioning plate * 1 pair of lashing rings on the front cross member (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the loading area, foldable outwards (LC 10,000 daN) * 1 pair of fixed wheel recesses in front of the axles, open up to the gooseneck cross member, approx. 700 x 410 mm (W x D) * Wheel recesses with 15 x 15 mm square climbing strips and widenings at the bottom (in case vehicle is equipped with extendable widenings) * 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm (L x W x D), in the platform between 1st and 2nd axle * Wheel recesses with 15 x 15 mm square climbing strips and widenings at the bottom * Aluminum covers for the wheel recesses in front of the axles and between the 1st and 2nd axle, which can also be used as widening planks (if vehicle is equipped with extendable widenings) * Lockable aluminum elements installed on the extension tubes of the widenings * 1 pair of mechanical rear supports * 1st axle with traction aid * Sandblasting painted...

Condition: new, Year of construction: 2025, functionality: fully functional, total length: 2,250 mm, total width: 840 mm, total height: 1,350 mm, * Year of manufacture 2025 (new unit) * Kohler KDI 2504 TM engine * Mecc alternator * Sockets: 1 x 32A, 1 x 16A * 1 x Schuko * Forklift pockets Power 41 kVA Length 2250 mm Width 840 mm Pjdpfx Afex Tzpmsgept Height 1350 mm Weight 1070 kg

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: 0-200-87-0913, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, edge thickness (max.): 3 mm, height adjustment type: electric, total length: 10,825 mm, Equipment: documentation/manual, Used single-sided HOMAG edge-banding machine for straight edges – EDGETEQ S-500 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2023 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors each 3 kW (clockwise, counterclockwise), jumping function GLUING SECTION V20, consisting of: - QA65 glue application unit, with PTFE-coating (Teflon), with pneumatically operated glue gates - pneumatic clamping of glue application - Pre-melter for PUR glues - Edge magazine, edge thickness min. 0,4 mm to max. 3 mm Edge width (height) max 65 mm - 2-fold automatic edge roll changing magazine - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK25 horizontal, 2 motors, with straight/chamfer cutting function - Edge Trimming MS40 2x0.55 kW, top/bottom - Multifunction Corner Rounding MF60, 2 motors 0.4 kW (top/bottom) with linear motors, soft-touch - Profile (radius-) Scraping MN11, multi scraping tool, automatic positioning and adjustment (NC) - Flat Scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers), automatic adjustment - Buffing Unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch Psdoy D A Swspfx Afgopt - woodCommander 5 - Edge sequence control - change-over in the gap Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: new, Year of construction: 2025, We currently have 4 units of this model available. JCB G65QS Diesel Generator: 60KVA & DSE 7310 G65QS * 60KVA prime-rated * 3-year or 8,800-hour warranty * JCB DieselMax engine * Fuel optimized * Socket pack: 1 x 63Amp, 1 x 32Amp & 2 x 16Amp * 3-way valve * Central lifting point * Fork pockets Ppodey Aiqwspfx Afgst * Engine sump pump * Bump stops * DeepSea 7310 control panel * Earth leakage protection * CE certification ----11914+11913+11912+11911 Errors and prior sale excepted.

Condition: new, Year of construction: 2025, Currently, we have 3 units of this model available. JCB G45QS Diesel Generator: 44.8 kVA CONSTRUCTION SPECIFICATION ----* Lockable maintenance access doors * Control panel viewing window * High-density fireproof foam * CE pack * Central lifting point * Fork pockets * 12V starter battery * Sump oil drain pump * Socket wrench cover * Deep sea electronics control panel * Bunded base fuel tank TECHNICAL SPECIFICATION * Prime power: 41 kVA * Length: 2250 mm * Width: 840 mm * Height: 1350 mm * Weight: 1070 kg * Total fuel capacity: 77 L * Fuel consumption: 7.06 L/h Ppsdpfx Afsy Aiqqsget * Noise level: 66 dB(A) ----11917, 11916, 11915 Vehicle number: Errors and prior sale excepted.

Condition: used, Year of construction: 2021, input voltage: 400 V, input current: 17 A, input frequency: 50 Hz, type of input current: three-phase, We are offering this used HOMAG EDGETEQ S-240 edgebander, year of manufacture 2021. The package includes a KOGI dual-bag chip extractor, 2.2 kW / 1650 Pa. The machine comes with an additional glue pot. An appraisal report is attached in the PDF. Type: EDGETEQ S-240 PROFI KDF 230 Machine number: 0-261-73-7111 Year of manufacture: 2021 Wiring diagram: 0-261-73-7111 Supply voltage: 400Y/230 V Number of phases: 3 Frequency: 50 Hz Maximum full-load current: 17.3 A Fuse: 20 A Psdpfxey Exwfj Afgept Short-circuit current: 5 kA Control voltage: 24 V Enclosure rating: NEMA 1 Largest motor: 4.6 A Largest heater current: 2.3 A If you have any questions or require further information, please send us a message or contact us by phone.

Condition: ready for operation (used), Year of construction: 2003, 7-station Theisen & Bonitz gatherer tb sprint B307 VP, equipped with: – 7 stations collator / gatherer – stack height up to 30 cm – height control – double sheet control – missing sheet control – including jogging table for solo-gathering / collating Theisen & Bonitz tb sprint 303 QSM stitch- fold- and trimming unit QSM quick set semi automatic size setting version Equipped with 2 Hohner 43/6 stitching heads and delivery belt Pjdoxnb Hfepfx Afgopt Technical details Min. open format 6,5 x 15,5 cm Max. open format 35 x 50 cm Max. format booklet 25 x 35 cm Max. format booklet 6,5 x 6,5 Paper weight 18 – 1.000 gsm Max. stitching heads 6 Max. speed 3.300/h for solo gathering – 3.100/h inline with 303 (depending on paper and format)

Year of construction: 2022, condition: like new (used), functionality: fully functional, Description: JACIR Water Cooling Tower RXH-6029-84-N245-370-BR Characteristics: Pedsvzw H Espfx Afgept Thermal power: 4610 kW Incoming temperature: 43 °C Outgoing temperature: 30 °C dBa (20 m): 55 Max. H2O flow: 305 m3/hour

Condition: used, This listing is for the Sartorius MSA225S-1CE-D1 + Sartorius YDP10 Printer Ppedpfxjyyp Hyj Afgjt The unit is in full working condition and is ready for immediate use The Sartorius Sartorius MSA225S-1CE-D1 + Sartorius YDP10 Printer combination is a dependable laboratory balance and printer set designed for accurate and consistent weighing in research, education, and industrial environments. Built with precision engineering, it delivers reliable measurement performance for routine laboratory applications. Its robust construction ensures long-term durability, while the clear digital display allows for easy reading of results. The intuitive interface makes operation straightforward, reducing user error and improving workflow efficiency. Ideal for general laboratory weighing tasks, the MSE1245 Solent Scale provides the accuracy and stability expected from Sartorius equipment, making it a practical and cost-effective solution for everyday use

Condition: used, This listing is for the Sartorius MSA225S-1CE-D1 Solent Scales + Cubis MCA623S The unit is in full working condition and is ready for immediate use The Sartorius MSA225-1CE-D1 Solent Scales + Cubis MCA623S combination is a dependable laboratory balance and printer set designed for accurate and consistent weighing in research, education, and industrial environments. Built with precision engineering, it delivers reliable measurement performance for routine laboratory applications. Ppsdpfxoyyptgs Afget Its robust construction ensures long-term durability, while the clear digital display allows for easy reading of results. The intuitive interface makes operation straightforward, reducing user error and improving workflow efficiency. Ideal for general laboratory weighing tasks, the MSE1245 Solent Scale provides the accuracy and stability expected from Sartorius equipment, making it a practical and cost-effective solution for everyday use

Condition: refurbished (used), Year of construction: 2017, machine/vehicle number: 0-261-96-0637, Equipment: documentation/manual, Feeding and Discharge of Workpieces • Upper pressure belt • Variable feed rate: 8–18 m/min • Front air-cushion table • Automatic infeed fence • Prepared for connection to return system Edge Banding • PUR pre-melter, capacity 2.5 kg/h • Glue pot QA65, quantity: 2 • Support for narrow workpieces • Automatic edge feed Workpiece Finishing • Anti-adhesive and cleaning fluid system • End trimming unit • Edge milling unit with R-2 and R-1 tooling • Flat scraper, top/bottom polishing unit • Multifunctional profile scraper unit with R-2 and R-1 tooling • Corner rounding unit with R2 tool, dual-motor MF50 Documentation • Language options: English, German, Croatian • Format: Data storage medium + paper documentation General Information Ppsdpfxsy Eft To Afget • Year of manufacture: 2017 • Control system: HOMAG POWERTOUCH group • CE marking: YES • Availability: Ready for collection – April 2026 • Machine length: approx. 6,075 mm

Condition: good (used), 371 USED WP Multimatic + Super B Kompakt 3000 roll line + tray stacking station. EXTERNAL DIMENSIONS (in cm): - L: 760, - W: 250 (including the tray stacking station), - H: 300. EQUIPMENT: - Multimatic rounding and dividing machine, Ppsdsy Ehmvspfx Afget - pre-proofer, - final proofer, - tray stacking, - tray stacking station, - croissant outlet, - Kaiser/daisy roll mark,. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: excellent (used), functionality: fully functional, Fully automatic 5-row divider for portioning all common doughs in industrial operations. Used for the production of bread rolls, donuts, buns, and other small baked goods. High performance and reliability Ppedsy A R Dljpfx Afgjt Flexible dividing range thanks to easily interchangeable rounding drums Gentle dough handling without the use of oil. Specifications Number of rows: 5 Weight range: 50–150g Hourly output: 2,000 pieces/hour per row Weight: 980 kg Connected load: 4.5 kVA Drive motor power: 2.2 kW Manufacturer: Werner & Pfleiderer, Germany

Condition: excellent (used), Year of construction: 1979, Rope Production line / Strand Rewinding line REDAELLI Line STABILISED CONCRETE PRE-STRESSING STRAND 3-wire and 7-wire strands which use with beams covering long spans, bridge elements, large pre-stressed elements, e.g. floor elements, piles, pre-tensioned and post-tensioned structures. - Year -1979/2005 - Pay of spool size - 800x900 mm - ⁠Range of strand production : - 3/8 - 1/4 - ⁠1/2 - 5/16 - ⁠6/10-7/16 - ⁠7/10-9/16 - Coil Weight - 4.000 kg - ⁠speed - 40-60 m/min. - ⁠High carbon steel wire - ⁠PC Stand size: - ⁠6.4,6.9,9.3,21.5 mm - ⁠Electrical supply - 400 kW Line Consists : Wire Pay Of Ppodpfx Ajt Iq Hbefgot Wisting Unit Furnace Cooling System Traction Rollers Winding the Rope

Condition: used, Year of construction: 2025, working width: 2 mm, MM123 4EH 75/102 / M123 4E/5BH102 FRAME / 4 BODIES / GRINDEL STONE PROTECTION NSHMM123 / GRINDEL STONE PROTECTION / NSHMM123 / FRAME SWING DEVICE / STANDARD PLOUGH HEAD / MEC HEAD / CARRYING AXLE CAT.2 FOR HEAD A / MEC. ADJUSTMENT / MM113/123 Pjdpfx Ajyynvtefgept

Year of construction: 1998, condition: used, New: Yes Power: 400 kW (544 HP) Dimensions (LxBxH): 401 x 140 x 185 cm Ppodpfxjyxm I Es Afget

Condition: used, The Thermo Scientific MaxQ 8000 incubated shaker provides precise temperature-controlled mixing for laboratory applications. Direct-from-lab surplus due to closure, ideal for consistent shaking and incubation workflows. Transparency Report and Technical Audit: Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. - Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Psdjyvvl Ispfx Afgopt Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. * Source Pedigree: Tier 1 Biotech * Condition: Direct-from-Bench - Clean (Original) Electrical: Power-On Test: Verified: System boots to home screen / fans active Integrity: 100% Original Parts (Non-Refurbished)

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 245 h, load capacity: 3,600 kg, lifting height: 4,830 mm, free lift: 1,840 mm, fuel type: electric, mast type: triplex, construction height: 2,390 mm, fork carriage width: 1,200 mm, fork length: 1,200 mm, empty load weight: 4,683 kg, total length: 2,340 mm, drive type: Elektro, construction width: 1,600 mm, Reach Truck Load center of gravity: 600 Fork width: 140 mm Fork thickness: 45 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: Very good Battery voltage: 48V Battery Ah: 620Ah Battery year of manufacture: 2017 Ppodpfx Aeyxh D Iefget Description: In addition to this Dimos model, we also have approximately 200 heavy-duty forklifts, compact forklifts, forklifts, and sideloaders in our warehouse in Hamburg and Gdansk. Visit our website. Hire purchase and financing at favorable conditions are always available. We are also happy to purchase your used vehicle on an over-the-counter basis, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail about this EQS4542FU. P.S.: Our forklift workshop specializes in repair, maintenance, overhaul, and custom construction for forklifts weighing 8 tons and over. We would be happy to display your vehicle for consignment sale. Full free lift,

Condition: used, axle configuration: 2 axles, first registration: 07/2012, loading space length: 7,700 mm, loading space width: 2,480 mm, loading space height: 2,880 mm, suspension: air, tire size: 385/55R22,5, wheelbase: 1,500 mm, Year of construction: 2012, Tyre size: 385/55R22,5 Suspension: air suspension Drive: Wheel Empty weight: 6.060 kg Pjdpfsucytlox Afgjpt Carrying capacity: 11.940 kg GVW: 18.000 kg