Used Encoder for sale (622)

Condition: new, Baumüller DSG 100-K servo motor SN:20521958 + DG 66 ANC encoder + DGS 67 A5B encoder, unused with storage marks, 100% functional, scope of delivery as per photos Godoi D E Dvjpfx Almsbl

Condition: ready for operation (used), Baumüller GNAF 112-LV direct current shunt motor without encoder, serial number as per photo, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photo. The agreed sales discounts do not apply to this item. Please request the price separately. ATTENTION: Please enquire separately about costs for packaging and shipping! ATTENTION: Please enquire for charges for packing and transport separately! Gbodpswn R A Ejfx Almsl

Condition: ready for operation (used), SEW Eurodrive KHF37R17DRS71S4BE05HF/ASB8/AS7W Gear motor without encoder SN:01.1797511101.0004.12 ,used, normal signs of wear, 100% functional, scope of delivery according to photos Gjdepf Anfspfx Almjbl

Condition: ready for operation (used), Siemens 1FT5066-0AC01-2 - Z permanent magnet motor SN E0T98376301014 without cover Z = holding brake installed + prepared for encoder system, used, minor signs of wear, 100% functional, scope of delivery as per photos Gsdpfx Aombr Naolmobl

Condition: ready for operation (used), Siemens 1FT5066-0AC01-2-Z permanent magnet motor with brake and encoder system - without cover SN: E0T98376301002, used, normal signs of use, 100% functional, scope of delivery as per photos, Z see type plate Gbsdpfx Alombr Nhsmel

Condition: ready for operation (used), Heidenhain ROD 270 18000 02S12-03 rotary encoder. 331 882-22 SN:X942010635, used, minor signs of wear, 100% fully functional, scope of delivery as per photos. Gbodpfx Asx Er Spolmol

Condition: ready for operation (used), Indramat 112A-0-ZD-4-C / 130-B-0 / WI572LV / S005 permanent three-phase servo motor + Heidenhain Rod 1424.003-600 Rod encoder. 250 040 12, serial number as per photo, used, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos Gbodoi D Ipqspfx Almjl

Condition: new, Dunkermotoren GR 53X58 DC motor 24 V /3000 rpm + gearbox PLG 52 / 36:1 + encoder system ME52-12 , 12mm shaft, key 4mm, total length 235mm , unused, 100% functional, scope of supply according to photos Gbjdsi D Hq Eepfx Almsl

Condition: ready for operation (used), SEM MT30Z4-85 ferrite brushed DC servomotor SN:G12677 + encoder SD-253-510W, used, normal signs of use, 100% functional, delivery as shown in the photos Gbedet S Amzopfx Almel

Condition: used, Year of construction: 2015, Lot consists of: (1) Injection molding machine, Handling: Sepro Robotique | SR SUCCESS11 S3 Trans | 2014 Temperature control: HB Therm | Miscellaneous: 1x Protective Enclosure Gbsdpfx Aey N R N Uolmsl 1x Handling system 1x Conveyor belt Technical Details: Max. stroke (mm): 175.0 Measuring system: Incremental encoder Clamping system: Toggle (KH) Clamp force (kN): 1000 Injection servo: No Screw diameter (mm): 40.0 Screw speed (rpm): 420 Heating zones: 4 Heating power zone 1 (kW): 4.23 Heating power zone 2 (kW): 3.00 Heating power zone 3 (kW): 3.00 Heating power zone 4 (kW): 3.00 Temperature control: J-type thermocouple Pressure sensor type: Diaphragm

Condition: used, Adept Robot System, Industrial Robot, Used Machine Dimensions: Length: 1250 mm Width: 520 mm Height: 1860 mm Manufacturer: Adept Robot System Model: Cobra 800 Type: SCARA (4-axis) Maximum reach: 800 mm Rated payload: 2 kg Maximum payload: 5.5 kg Repeatability (XY): ±0.017 mm Repeatability (Z): ±0.003 mm Repeatability (Theta): ±0.019° Protection class: IP65 Year of manufacture: 2003 (according to label) Special features: Outstanding precision and speed Gbsdpfx Ajwm Hnbslmjl Integrated servo amplifier and controller (space-saving design) Conveyor tracking and vision system integration capability Easy calibration with absolute encoder Optional IP65 protection (dust and waterproof design) Summary: The Adept Cobra 800 is a high-performance, compact SCARA robot designed for fast, precise, and flexible industrial automation tasks. With a maximum reach of 800 mm, payload capacity of 2–5.5 kg, and excellent repeatability, it is an ideal solution for assembly and material handling operations.

Condition: excellent (used), Year of construction: 2003, Size: Box length: 80-535 mm Box width: 50-500 mm Equipment: Standard version, laser counter, right-hand turning, - possible left-hand turning Types of packaging: 1-point packaging, 4-point packaging (min. side height 40 mm), 6-point packaging (max. 400 g/m²) Gbjdpfow H N Spox Almsl Packaging material: 200 - 600 g/m² Packing scheme: 1-5 rows side by side, 1-5 layers stacked, Depending on the box type, up to 7 layers are possible Performance: up to 200,000 boxes per hour, cleaned, tested Overhaul 2023: all worn parts replaced The machine can be relocated quickly as speed is taken from the encoder. Machine changeover takes 5 minutes. - Possible installation at customer site by our operators with commissioning warranty +2500 EUR + travel costs, to be agreed individually - Additional set of new belts

Condition: used, Year of construction: 2022, TAKUMI V12 VERTICAL MACHINING CENTER YEAR: 2022 MANUFACTURER: TAKUMI PRECISION CO LTD., TAIWAN MODEL: V12 CNC CONTROL: HEIDENHAIN Machine Specifications Movements & Range • X-axis travel: 1200 mm • Y-axis travel: 660 mm • Z-axis travel: 610 mm • Distance from floor to table surface: 931 mm • Distance spindle nose to table surface: 150 – 760 mm • Distance spindle center to column: 700 mm Pallet • Pallet size: 1250 x 650 mm • Pallet loading capacity: 1200 kg • Pallet T-slot (number x width x pitch): 18 x 100 mm x 5 Spindle • Spindle speed: 12,000 rpm • Spindle taper: BT 40 Feed Rates • Rapid traverse (X/Y/Z): 24 / 24 / 20 m/min • Cutting feed (X/Y/Z): 1 ~ 8000 mm/min • Manual feed rate: 0 – 1260 mm/min • Linear encoders Automatic Tool Changer BT40 • Number of tool positions: 24 • Max. tool weight: 7 kg • Max. adjacent tool diameter: 80 mm • Max. tool diameter (with empty adjacent pocket): 150 mm • Max. tool length: 300 mm • Tool selection: Random, bi-directional Godpfxjy Nkg Tj Almjbl Machine is supplied with chip conveyor, manuals, and CE declaration of conformity. All technical data provided is for reference only and may be subject to change without notice; therefore, it is not binding.

Condition: like new (used), Year of construction: 2016, operating hours: 30,592 h, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, controller manufacturer: FANUC, controller model: Professional 5, workpiece length (max.): 650 mm, workpiece width (max.): 500 mm, workpiece height (max.): 500 mm, workpiece diameter (max.): 650 mm, workpiece weight (max.): 350 kg, total height: 3,200 mm, total length: 3,550 mm, total width: 2,900 mm, table load: 350 kg, rotary table diameter: 500 mm, overall weight: 15,700 kg, spindle speed (min.): 14,000 rpm, operating hours of spindle: 30,592 h, Year of construction: 2016 CNC controller: FANUC Professional 5 Axes X-axis travel mm: 550 Y-axis travel mm: 1000 Z-axis travel mm: 500 C-axis degrees: 360 (continuous rotation) / rotary encoder A-axis degrees: 150 (+30 120º) rotary encoder Feed rates m/min: X:32; Y,Z:40 Rapid traverse m/min: X,A,C:48; Y,Y:50; A,C:18 Worktable Table dimensions mm: 500 Maximum workpiece size (D x H) mm: 650x500 Max. workpiece weight kg: 350 Spindle Spindle speed rpm: 14000 Tool system Tool holder: HSK-A63 Tool magazine slots: 323 Tool changer: Pinza doble Max. Tool Diameter 70 With occupied neighboring places mm: 140 Max. Tool Length mm: 300 Max tool weight kg: 8 Equipment Electronic Handwheel Chip conveyor Measuring probe Machine running times Under power: 63813h Spindle Working: 30592h Gbedpfxsy Icu Te Almol Basic machine dimensions / weight Length mm: 3550 Width mm: 2900 Height mm: 3200 Weight kg: 15700

Condition: used, Year of construction: 2018, functionality: fully functional, arm reach: 2,500 mm, Equipment: documentation/manual, For sale: A high-quality HEXAGON Absolute Arm 8525 (7-axis) with RS5 laser scanner, purchased new at the end of 2018. The system has been carefully maintained, used exclusively in an industrial environment, and serviced regularly. The measuring arm is ideally suited for: # Quality control # Incoming goods inspection # In-process measurements # Reverse engineering # 3D scanning and surface capture A valid calibration / ISO-10360-12 certificate is available and can be supplied upon request. Technical data (measuring arm) # Model: HEXAGON Absolute Arm 8525 # Axes: 7 Gbedpfx Asy Iagaelmsl # Measuring volume: 2.5 m # Encoders: Absolute encoders & SMART sensors # Zero-G counterbalance with SmartLock & HomeDock # Wrist display with haptic feedback # SpinGrip & SpinKnob # Base plate with mounting ring RS5 Laser Scanner (installed) # Premium RS5 laser scanner for point and surface scans # Operation in standard or compact mode # Removable pistol grip (sizes: small / medium / large) # ODU-USB & ODU twin cable (USB/LAN) # Certified scan report for arm + scanner Comprehensive accessories (see photos) ✔ Control Pack 3 (wireless, installed) ✔ TESA / TKJ CFRP probes (including 3 mm / 6 mm ruby, 15 mm steel) ✔ Calibration sphere & length gauge ✔ Magnetic mounting plate ✔ Block spring set ✔ Hook wrench ✔ Transport & accessory case (original HEXAGON) ✔ Power supply, dust cover ✔ PolyWorks USB dongle (for Inspector, license status on request) Software # PolyWorks Inspector™ Premium (original purchase) ➡ License details / transferability to be clarified upon request Your advantage # Significantly more affordable than new # Immediately available # Proven industrial quality by HEXAGON # Ideal for QC, contract measurement, prototype construction & manufacturing Inspection & Shipping # Inspection and testing by arrangement possible # Shipping carefully packaged in the original case # Collection preferred

Condition: like new (used), Year of construction: 2020, functionality: fully functional, We present a fully automated fiber laser cutting system with integrated storage, robotic handling, and high-speed precision performance, designed for industrial production environments. KIMLA POWERCUT LF1530 Fiber Laser Cutting System (Fully Automated Line) Model: KIMLA POWERCUT LF1530 Gbjdpfx Aljy Nwtyemol Manufacturer: KIMLA Year of manufacture: 2020 Compliance: CE certified Control system: Full CNC digital control Technical Specifications Installation length 12,500 mm Installation width 7,200 mm Installation height 3,000 mm Nominal sheet size (X axis) 3000 mm Nominal sheet size (Y axis) 1500 mm Cutting area X axis 3050 mm Cutting area Y axis 1550 mm Cutting area Z axis 120 mm Max positioning speed (all axes) 230 m/min Max positioning speed (X/Y axes) 230 m/min Max positioning speed (Z axis) 70 m/min Acceleration (X/Y axes) 6G Repeatability 0.001 mm Positioning accuracy 0.002 mm Max workpiece weight 900 kg Laser source Fiber laser, 4000 W (IPG) Pulse frequency ±1–2500 Hz Total power consumption (excluding extraction & chiller) 30 kW Drive system Linear drives on all axes Optical linear encoders Yes Part measurement/scanning system RENISHAW or equivalent, inductive Automatic sheet loading/unloading & storage system Integrated, 12 positions, 2000 kg each Shuttle tables Yes, 3 Table exchange speed 1 m/s Tube cutting option Yes, on third pallet Dynamic motion control (trajectory optimization) Yes Robotic part handling system Yes, robotic arm with full integration Documentation English CE compliance Yes Control system Digital (CNC) Spare parts and tools Yes

Condition: used, CNC Lathe DMG MORI SEIKI - GILDEMEISTER Type CTX 310 ecoline Machine No. 8044001846E Year of manufacture: 2013 CNC Control: SIEMENS Sinumerik 840D sl Gbsdpfx Aoyk Hrgelmel Swing diameter over bedway cover: 330 mm Swing diameter over cross-slide cover: 260 mm Centre height max.: 190 mm Centre distance max.: 580 mm Turning diameter max.: 200 mm Longitudinal slide travel (Z-axis) max.: 450 mm Cross-slide travel (X-axis) max.: 160 mm Spindle bore through draw tube: 51 mm Spindle bore through front bearing: 100 mm Spindle speed max.: 5,000 rpm Feed rate X and Z: mm/min. Rapid traverse X-axis: 30 m/min. Rapid traverse Z-axis: 30 m/min. Feed force X and Z: 4,500 Nm Tool turret: 12 stations Driven tool stations: 6 stations Tool holder cylindrical VDI 30 mm Spindle drive motor power at 100% duty cycle: max. 11 kW Spindle drive motor power at 40% duty cycle: max. 16.5 kW Power supply: 400 Volt, 50 Hz, 21 kVA - CNC control SIEMENS Sinumerik 840D sl, system software NCU V04.04+SP02+HF02 - Controlled C4-axis chuck position and C1-axis for tool turret - 3-jaw chuck AUTOGRIP Ø 210 mm with 1 set of hard jaws and 15 sets of soft jaws - AUTOGRIP hydraulic hollow clamping device - Clamping force adjustment for regulating clamping pressure - Tool turret SAUTER, type 0.5.901.020 with 12 stations (6 driven) - 20 tool holders VDI 30 - Tailstock MK 4 - Indirect measurement system via rotary encoder - Chip conveyor with integrated coolant system - Workpiece residual life display and piece counter as large display on machine enclosure - Control cabinet cooling unit - 9,716 total operating hours (main switch on), of which 3,322 spindle hours as per counter - Operating instructions and manuals Machine footprint with chip conveyor (L x W x H): 4,500 x 2,600 x 2,050 mm Base machine space requirement (L x W x H): 2,900 x 2,150 x 2,050 mm (3,200 kg) Chip conveyor space requirement (L x W x H): 3,350 x 850 x 1,650 mm (500 kg) Weight: approx. 4 tons Very good condition

Condition: ready for operation (used), Year of construction: 2008, functionality: unexamined, DESCRIPTION Beck-Packautomaten Series Packer S1750 X Fully automatic film packaging machine for four-side product sealing Fully automated, conveyor belt feeding with light barrier control Operation: The Beck series packer operates fully automatically with photoelectric product detection. The goods to be packaged are conveyed on a transport belt into the cross sealing unit and are then sealed on all four sides in a step-by-step process. The film rolls are positioned above and below the transport belt. For the production of tight shrink packs, the packaging machine can be expanded into a complete film packaging line by integrating the proven, energy-saving Beck heat shrink tunnel. Technical data: Standard operator side: right Gbjdpfx Aley H Dynjmjl Sealing bar width: 550 mm Sealing bar closure: servo-driven Sealing system: permanently heated Pass-through height: 100 mm Infeed belt width: 140 mm Outfeed belt width: 140 mm Product width: 150–500 mm Product length: 30 mm up to unlimited, with closure of sealing bar gap Speed control: infinitely variable with frequency converter from 19–40 m/min Capacity: up to 50 cycles/min* Longitudinal sealing: continuous operation Film: flat film, printed or plain, from 11 to 80 micron Film width: max. 650 mm Film roll diameter: max. 300 mm Machine length: 2,550 mm Machine width: 1,600 mm Machine height: approx. 1,700 mm Working height: 800–950 mm Electrical connection: 3N400V 50 Hz Connected load: approx. 3 kW Paint finish: cream white / green * Machine output depends on equipment, product, and film. Description: • Machine frame in steel sandwich construction • The sealing system is permanently heated and maintenance-free • With freely-programmable Siemens S7 PLC • Siemens operator panel: digital control unit OP7 • Easy format changeover via central width and height adjustment • Format data storage with simple menu and operator guidance • Inline product feeding, product indexing via light barrier, optionally horizontal or vertical scanning • Hold-down plates at the cross sealer with product scanning • Longitudinal sealing electrically actuated • Film unwind device integrated in the machine frame, without plug-in shaft (allows easy and quick film roll change) • Film rewind device with film break-control, high roll capacity • Film feed motor-driven, including end-of-film detection • Machine hood for optimum accessibility, all safety windows equipped with safety switches • Beck packaging systems meet CE conformity requirements Additional equipment: - Rotary encoder, swing-away side sealing system, needle perforation unit for the top film

Condition: new, Saw unit swivels 46 ° on both sides. Programmable, electric saw blade adjustment Control unit with electronic display for saw blade tilt and lift Torsional rigidity and vibration-free working Easier plate feeding due to large trimming frame with roller Telescopic ruler with 2 professional folding stops Excellent cutting precision scoring unit equipped with its own motor - easily adjustable from the outside saw blade diameter of 400 mm scoring saw blade with a diameter of 160 mm 2-position saw blade pendulum protection manell adjustable 3-axis controlled Motorized rip fence with electronic positioning includes: Position display via an encoder Adjustment via ball screw Stepless adjustment via switch or automatic positioning system Cutting width 1270 mm Programmed movement of motorized adjustment and tilting for saw unit UP version with swivelling control panel for maximum flexibility X version with Compex miter fence for quick and accurate execution of miter cuts with automatic compensation of the stop position. (Length compensation) incl. options: - cutting lenght 3200 mm Gbodpfx Asd Akygslmol - on / off buttons for main motor and scoring unit integrated in saw carriage - CompeX frame - Version "READY 3 UP" - 2 saw speeds (3500/5000 U/min) Max. cutting width with rip fence 1270 mm Format cuts 3200 mm main motor 7,0 kW, 400 V, 50 Hz Saw blade angle -46 - 46 ° Max. cutting height 90° 136 mm Max. cutting height 45° 97 mm Max. cutting height -45° 60 mm saw blade diameter 400 mm Diameter scoring saw blade 160 mm (Main) saw blade speed 4000 min¯¹ Dust extraction ports 120 & 80 mm

Condition: excellent (used), Year of construction: 2017, operating hours: 5,120 h, functionality: fully functional, travel distance X-axis: 7,800 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 655 mm, rapid traverse X-axis: 75 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 40 m/min, torque: 12 Nm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Axis Travel Ranges X-AXIS (longitudinal): 7,800 mm Y-AXIS (lateral): 1,100 mm Z-AXIS (vertical): 655 mm B-AXIS (vertical-horizontal rotation of the machining head): 0° ÷ 90° C-AXIS (vertical rotation of the machining head): 0° ÷ 360° Traverse Speeds X-AXIS: 75 m/min Y-AXIS: 60 m/min Z-AXIS: 40 m/min B-AXIS: 3,240 °/min C-AXIS: 3,600 °/min Axis Acceleration X-AXIS: 3 m/sec² Y-AXIS: 3 m/sec² Z-AXIS: 2 m/sec² Motor Spindle Max. power in S1: 15 kW Max. speed: 24,000 rpm Max. torque: 12 Nm Tool holder: HSK – 63F Spindle encoder for rigid tapping Water cooling with cooling unit Automatic Tool Changer Gbedpfx Aljy Iqr Tomjl Standard for 16 tools Maximum permissible tool size in standard magazine: Ø = 80 mm L = 300 mm Maximum permissible saw blade size in standard magazine: Ø = 180 mm L = 150 mm Saw blade magazine for max. saw blade Ø = 500 mm L = 73 mm Processable Profile Sides With tool without angle head (profile top, profile sides, end faces): 5 With saw blade, Ø = 500 mm (profile top, profile sides, end faces): 1 + 2 + 2 Thread Cutting Performance (with tap on aluminium and through hole) Rigid tapping: M12 Larger threads possible with thread milling cutter Profile Feeding 2 reference stops with fixed positions Functions Dynamic pendulum mode Processing of overlengths up to max. double the machine length (X axis) Cutting and separating of the bar (not with 2-bar parallel operation) Automatic operation: milling and cutting (not with 2-bar parallel operation) Workpiece Clamping Standard equipment pneumatic clamping elements: Versions dynamic and static 7,800/6 Max. number of pneumatic clamping elements: 12 6 clamps per zone, movable along the entire machine range Max. profile width, Y, with standard tool clamping: 550 mm Motorized clamping device Absolute measurement of clamp position Safety Devices and Protective Equipment Light curtain system for workspace access protection 3-sided metal safety fence Full machine enclosure by accident and sound protection cabin Internal lighting Protective cover made of laminated safety glass Machine Structure Monoblock machine frame made of electro-welded and normalized steel Chip conveyor with steel belt on the right side of the machine Machining Unit Portal construction Motor spindle controlled on 5 axes, simultaneous interpolation possible Minimal quantity lubrication system (oil) Central lubrication system for guides Operation and Control Control cabinet with cooling unit Pneumatic control cabinet CNC with real-time control MG-Pilot Industrial PC with touch screen Atom 1600 processor 15” graphic LCD-TFT color display Keyboard, mouse 1 Gbyte RAM 4 Gbyte Compact Flash card 4 USB ports RJ45 network card Software Microsoft® Windows® Embedded Bidi-CAM DRILL Power Supply (Voltage/Phases/Hertz) 400V/3PH/50Hz Software for Machining Center Control CAMPLUS for SATELLITE XT, graphical programming software for machining with 3D visualization SHAPE, software for creating any freeform machining contours

Condition: new, Year of construction: 2026, functionality: fully functional, Advanced machining centre for drilling, designed for high performance and precision. An ideal solution for furniture manufacturers, enabling complete processing of workpieces in a single working cycle. Equipped with TPA control. Automatic CNC six-sided drilling machine FEATURES AND EQUIPMENT - Six-sided drilling – complete vertical and horizontal machining in one cycle. - Drilling heads: 9 top vertical drills, 9 bottom vertical drills, 8 horizontal drills (2 per side). - TPA control – user-friendly interface with integration capability for CAD/CAM software. - QR and barcode reader. - Absolute encoders – ensure accurate positioning and repeatability. - Automatic tool change. TECHNICAL SPECIFICATIONS: Maximum workpiece width: 1200 mm Workpiece thickness: 10–48 mm Minimum workpiece width: 50 mm Gbodoxfrakopfx Almel Maximum workpiece length: 5000 mm Minimum workpiece length: 250 mm

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 2,500 rpm, travel distance X-axis: 340 mm, travel distance Z-axis: 2,000 mm, spindle motor power: 20,000 W, controller manufacturer: SIEMENS, controller model: Sinumerik 810D, number of axes: 2, Horizontal turning machine manufactured in 2008. This Weiler E50x2000 features a center distance of 2000 mm and a swing over bed of 570 mm. It has a spindle bore of 83 mm and a maximum torque at the spindle of 1600 Nm. Fully overhauled in 2026, it includes significant upgrades for enhanced performance. If you are looking to get high-quality turning capabilities, consider the Weiler E50x2000 machine we have for sale. Contact us for further details. • Control system: Weiler D3 with Siemens Sinumerik 810D • Center distance: 2000 mm • Center height: 280 mm • Swing over bed: 570 mm • Swing over cross slide: 340 mm • Cross slide travel: 340 mm • Bed slide guide length: 560 mm • Spindle head: DIN 55025, size 8 • Spindle bore: 83 mm • Main spindle internal taper: Metric 90 • Main drive power: 20 kW (60% duty cycle); 17 kW (100% duty cycle) • Maximum spindle torque: 1600 Nm • Speed range: • Gear stage 1: 1–625 rpm • Gear stage 2: 4–2500 rpm • Tailstock quill diameter: 80 mm • Tailstock quill stroke: 200 mm • Tailstock quill taper: Morse taper 5 • Tool holder system: Multifix size C or Parat size 3 • Availability: machine available soon • Overhaul: will be fully overhauled in 2026 • Hardening and grinding of all bed guides; grinding of tailstock guides • Overhaul of complete bed and cross slide assembly (grinding/scraping of all guideways) • Renewal of bed slide sliding lining • Renewal or relining of keyways and lower guides • Installation of a tool system on a console (Multifix C or Parat Gr.3) • Overhaul of complete spindle housing assembly • Regrind main spindle (internal/external taper and face) • Renewal of main spindle bearings • Renewal of X-axis ball screw drive incl. bearings • Renewal of Z-axis ball screw drive incl. bearings • Overhaul of tailstock quill and bore; replacement of spindle and nut • Renewal of all guideway wipers • Replacement of all drive belts • Cleaning and testing of main spindle motor • Overhaul of existing safety devices • Replacement of defective rotary, rocker, and limit switches • Replacement of spindle and handwheel encoders • Cleaning and testing of the central lubrication unit • Replacement of movable cables and coolant hoses in the work area/to the monitor • Replacement of the membrane keypad (monitor) • Renewal of the energy chains • Painting in standard colors (standard texture) • DGUV and high-voltage testing with test report • Data backup of machine parameters/software • Geometric acceptance testing according to DIN 8605 Additional equipment • Chip conveyor: used unit included Gbsdpoy H E Akofx Almol • Optional accessory: additional chip conveyor availableThe machine will be overhauled in July the pictures are only refreneces of how it would look like. Technical Specification Counter Spindle No Driven Tools No

Condition: like new (used), Fronius used -TPS4000CMT / TransPuls Synergic 4000 CMT R - cooling unit FK4000-RFC (4,045,837,632) water cooled Gsdspa N Aaepfx Almjbl - RCU5000i remote control Univ.SD (4,046,098) - VR7000 CMT R (4,045,963,000 - Angle encoder CMT (43,0001,1219) with robot hose package kPL Robacta - Interface Interbus Rugged Line(4,045,885) (optional Profibus and Profinet connections available)

Condition: used, Year of construction: 2004, operating hours: 26,000 h, functionality: fully functional, 2004 AMADA EM2510NT. The perforating machine is in good condition and has always been serviced on time by Amada service representatives. All documentation, service reports are included. Recently replaced bugno encoder. The machine is sold with software and tools. Perforating machine connected, available for testing, inspection. Specification: Year: 2004.07 Gbedst Hg Acspfx Almsl Made in France. Operating time in hours: 26 426 Hours of power: 65 006 Software: Control unit: AMADA AMNC-F Perforating force: 20 tonnes Stations: 45 Tools: sold with tools Metal length: 2500 mm. Metal width: 1270 mm. Sheet thickness: 3,2 mm. Metal width change: 5000 mm. Workpiece weight: 150 kg. Dimensions: P 6080 x P 5120 x A2318 mm Weight: 16 500 kg Location. Available for testing: Yes If you have any further questions, we will be happy to answer them.

Condition: ready for operation (used), Year of construction: 2018, Robot arm manufactured in 2018. This Hyundai Hi 5a-S features 16 simultaneous controlled axes, offering advanced programming and playback capabilities. It includes a full digital servo system and a user-friendly teach pendant with a 7" color TFT-LCD touch panel. The machine comes with a special gripper and a robust support podium. If you are looking to get high-quality automation capabilities, consider the Hyundai Hi 5a-S robot arm we have for sale. Contact us for further details. • Control model: Hi5a-S • Number of controlled axes: 16 simultaneous • Operations: Programming and Playback • Interpolations: PTP, Linear, Circular • Position control: Serial Absolute Encoder • Memory/backup: USB or Ethernet • Servo system: Full digital servo • Interface: Native DeviceNet, 2x Ethernet, 2x RS232/RS422, 1x USB, 1x CAN (optional), 1x DeviceNet Master, 1x SD card • Dimensions: 700 × 900 × 630 mm • Teach pendant: TP520 (7" color TFT-LCD touch panel, Windows CE) • Compliance: CE Declaration of Conformity and manuals included Additional equipment • Robot support podium (machined base ready for floor fixing) Godpfxey Hiams Almebl • Special gripper with spring-suspended suction cups and autonomous vacuum generator • Removable “claws” for tray handling • Industry 4.0 cyber-physical system (remote monitoring / tele-assistance) • Pro-face 7" color touch panel for production monitoring