Used Energy Recovery for sale (2,363)

Condition: used, mileage: 136,000 km, power: 55 kW (74.78 HP), first registration: 08/2015, fuel type: diesel, overall weight: 1,795 kg, color: white, gearing type: mechanical, emission class: euro5, number of seats: 2, Year of construction: 2015, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, Special equipment: Audio Package 14, rear wing doors with glazing, LED cargo area lighting, Sliding Door Package 10, Seat Package 13 Further equipment: Hfodpfx Aasy Scuzoiek Driver side airbag, Anti-slip regulation (ASR), exterior mirrors mechanically adjustable from inside, energy recovery (Smart Regenerative Charging), Driver assistance system: Hill-start assist (Hill Holder), Driver assistance system: Emergency brake assist, rubber mats in passenger/cargo area, seatbelt tensioners, cabin filter: dust and pollen filter, body type: panel van, steering column (steering wheel) height and reach adjustable, engine 1.5 L – 55 kW TDCi CAT, wheelbase 2489 mm, spare wheel in driving tyres (steel), low emission according to emission standard Stage 5 / Euro 5, black side protection strips, steel rims 6x15, starter package, tinted glazing Subject to prior sale, errors and changes excepted.

Condition: used, Year of construction: 2010, operating hours: 13,800 h, power: 1,600 kW (2,175.39 HP), For sale are 3 MTU cogeneration modules / CHP plants manufactured by MTU Onsite Energy GmbH, model AoE16V4000L62, year of manufacture 2010. These plants are ideally suited for decentralized energy generation and combined heat and power (CHP) applications. Technical specifications (per documentation): * Electrical output: 1,600 kW * Thermal output: 1,746 kW * Gas power: Pgaz PCS 4,579 kW / Pgaz PCI 4,121 kW * Voltage / Frequency: 400 V / 50 Hz Operating hours: * GE1: 42,479 h * GE2: 13,800 h * GE3: 43,397 h Hsdpsyt H H Nefx Aaisfk The scope of supply, as per documentation, includes a comprehensive range of auxiliary equipment and system components, including: roof-mounted air cooler, auxiliary cabinet, control cabinet, exhaust heat exchanger, water heat exchanger, pipework and ducts with chimney, oil storage room with 3 tanks and piping, as well as electrical cabling. These plants represent an attractive solution for operators, resellers, and projects in the fields of energy supply, industry, or for spare parts recovery.

Condition: new, Year of construction: 2026, overall weight: 6,500 kg, power: 75 kW (101.97 HP), shaft diameter: 1,200 mm, warranty duration: 12 months, MIZAR ERP Series - Eco Cable Recycling Plant & Copper Wire Granulator High-Purity Copper Recovery with Minimal Energy Consumption The ERP (Eco Recycling Plant) Series is Mizar’s latest innovation in eco-friendly cable recycling. Engineered to deliver maximum copper recovery with minimal energy consumption, this high-performance system provides a space-saving, sustainable solution for separating metal and plastic components from scrap cables with up to 99% purity. CORE COMPONENTS (Advanced 3-in-1 System) • Fine Granulator (FGR): Precision size reduction to prepare scrap cables for optimal separation. • Densimetric Separator (DES): Precise, density-based dry classification for the final separation of pure copper and plastics. • Dust Collector (DTF): Centralized filtration system ensuring a clean, low-dust, and eco-friendly workspace. KEY ADVANTAGES & FEATURES • Eco-Friendly & Energy Efficient: Optimized material flow drastically reduces power consumption while maintaining high throughput. • Smart Operation: PLC-controlled touch-screen interface for real-time monitoring and easy handling. Hsdpfexb A S Nex Aaisfk • Compact & Versatile: Space-saving design that works perfectly as a standalone copper wire granulator or as part of a larger recycling line. • Heavy-Duty Durability: CE-certified and manufactured with premium-grade materials for long-term industrial use. MODEL RANGE & TECHNICAL SPECIFICATIONS • ERP S1: Capacity: Up to 400 kg/h | Total Power: 30 kW | Rotor: 350x400 mm | Blades (R+S): 7+2 • ERP M1: Capacity: Up to 800 kg/h | Total Power: 50 kW | Rotor: 350x800 mm | Blades (R+S): 14+4 • ERP L1: Capacity: Up to 1,300 kg/h | Total Power: 72 kW | Rotor: 350x1200 mm | Blades (R+S): 21+6 • ERP XL1: Capacity: Up to 2,000 kg/h | Total Power: 102 kW | Rotor: 350x1600 mm | Blades (R+S): 28+8 Ready to optimize your cable recycling with eco-friendly technology? Contact us for a customized quotation, technical drawings, or to arrange a performance test. Mizar Recycling Machinery

Condition: new, Year of construction: 2026, power: 14 kW (19.03 HP), overall weight: 1,250 kg, total length: 1,300 mm, total width: 1,500 mm, total height: 2,140 mm, cutting length (max.): 500 mm, cutting diameter: 40 mm, number of blades: 5, rotor length: 400 mm, warranty duration: 12 months, MIZAR CMT Compact Series - All-In-One Copper Wire Granulator & Cable Recycling Machine The Ultimate Compact Solution for Maximum Copper Recovery The MIZAR CMT is an advanced, all-in-one cable recycling machine engineered for facilities with limited space but high-performance demands. Integrated with state-of-the-art Turbo Mill technology, it ensures the complete separation of even the finest copper wires (hair wires) from plastics, delivering maximum purity and scrap copper recovery in a single compact footprint. KEY ADVANTAGES & FEATURES • All-In-One Design: A complete, plug-and-play copper wire granulator engineered into a single, space-saving unit. • Integrated Turbo Mill Technology: Achieves exceptionally high purity by aggressively pulverizing and separating ultra-fine copper wires that standard granulators cannot process cleanly. • Optimized Input Capacity: Safely and efficiently processes scrap cables with a maximum thickness of up to 40 mm and a maximum feeding length of up to 50 cm. • High-Efficiency Copper Recovery: Highly effective in separating copper and plastic components, maximizing your recycling profitability. • Cost-Effective Operation: Energy-efficient drivetrain minimizes daily operational costs without sacrificing throughput. Hfedpfjv Hbdrjx Aaiek PROCESSED MATERIALS • All types of scrap electrical cables, flexible wires, communication cables, and complex harnesses (Max Ø 40 mm / Max Length: 50 cm). Ready for an all-in-one cable recycling upgrade? Contact us for a customized quotation, technical details, or a performance test. Mizar Recycling Machinery

Condition: new, Year of construction: 2026, functionality: fully functional, pressure: 8 bar, compressed air connection: 8 bar, warranty duration: 24 months, Equipment: cabin, compressor, crane, documentation/manual, lighting, ⭐⭐⭐⭐⭐ (5.0) ⚡️Top Service ⚡️Fast Delivery ⚡️Great Support! ✈️ Plus shipping costs – shipping on request.✈️ Fast Delivery: Only 8-10 weeks after payment receipt! Hjdpfx Aasghawmsijfk ✅Important Note: If you would like to receive a quote for a shot blasting booth, please use the shot blasting booth configurator on the homepage of our website. ➖➖➖➖➖ ✳️Maintain your liquidity! We offer a variety of financing models to ensure that your investment has the greatest chance of success. Contact us today to learn more about our lease-purchase, warranty, or leasing programs. ➖➖➖➖➖ ☘️Environmentally friendly☘️⚡️Green Energy⚡️☘️ 💥SR-LINE – Industrial shot blasting booths for XXL applications💥 🔧Maximum performance, robust design, well-thought-out concept! Whether railway cars, construction machinery, aircraft, or military vehicles – with our SR-LINE shot blasting booths, you can process even the largest and most complex workpieces reliably and efficiently! Our shot blasting booths offer a safe, clean, and high-performance environment for all types of surface preparation – whether for cleaning, roughening, or smoothing. _____ 🧩Complete system with all essential components: ✅Spacious main cabin with rubber lining for protection against wear ✅Emergency exit doors with safety windows ✅High-performance sandblasting vessel in various sizes ✅Pneumatic or mechanical abrasive recovery system ✅Efficient dust collection system to ensure air quality ✅Aftercooler, filter units, and robust steel construction ✅Main control panel for central control ✅Lighting system for perfect visibility in the booth ✅Optional: Traveling cranes, workpiece trolleys, wall-guided multi-axis units for better handling _____ ♻️Economical & Sustainable thanks to the recovery system The used abrasive is automatically or manually collected and returned to the cycle – resource conservation made easy! _____ 🔒Safety & Comfort according to EU standards Our systems comply with the applicable CE and safety standards and are equipped with optional noise insulation for a more pleasant working environment. 💨Fresh air systems with fans or suction lines ensure optimal air supply during the shot blasting process. _____ 📦What is included in the SR-LINE shot blasting system? • Shot blasting booth • Workpiece entrance door & operator door with panel • Interior lighting & rubber lining • Shot blasting vessel & abrasive container • Return system with scraper blades • Dust filter & aftercooler • Hoses, lines & main control panel • Robust supporting structure ⚠️Compressor and compressed air tank must be purchased separately. A suitable air duct is recommended. _____ 🚀Why SR-LINE? ✔️Customized planning for your application ✔️Extremely durable materials & components ✔️Designed for high performance and continuous operation ✔️Made by PROTON Maschinenbau GmbH – 40 years of experience _____ 📞Contact us now for an individual offer – we will be happy to advise you! 🛠️SR-LINE – Your solution for shot blasting technology in large format. ☀️ 2 YEAR WARRANTY ☀️ ☀️We have CE certificates for all our machines and ATEX certificates for the necessary machines.☀️

Condition: new, functionality: fully functional, power: 25 kW (33.99 HP), fuel type: electric, empty load weight: 2,550 kg, maximum load weight: 3,000 kg, overall weight: 2,550 kg, axle configuration: 4x4, color: yellow, gearing type: automatic, Year of construction: 2022, operating hours: 7 h, shovel volume: 1.47 m³, Equipment: UVV, additional headlights, all wheel drive, cabin, differential lock, trailer coupling, === KEY SPECIFICATIONS === Year: 2022 Operating hours: 10 h Operating weight: 2,550 kg Max. payload: 3,000 kg Bucket capacity: 1.47 m³ (heaped: 1.92 yd³) Drive system: Electric (asynchronous motor, 80 V) All-wheel drive: Yes Differential lock: Yes (electronically controlled) Quick coupler: No Cab type: Open with rotating seat Heated cab: No Air conditioning: No Tyres: 10.0/75–15.3 (AS tractor profile, pneumatic) Engine manufacturer: Bergmann / Asynchronous electric motor Engine power: 25 kW (33.5 HP) Emission class: Zero emission (Electric) Hydraulic output: 8.0 kW (approx. 15 l/min) CE certification: Yes === HIGHLIGHTS === 100% emission-free electric drive with lithium-iron-phosphate battery (16–24 kWh) Exceptional manoeuvrability with all-wheel steering Hfjdpfx Aaexr Nmnsiek Rotating seat for quick change of driving direction Regenerative braking system for energy recovery Low-maintenance, low noise level and low operating costs CE-certified and ready for immediate use === CONDITION === Machine in excellent condition with only 10 operating hours. Fully checked, tested and ready for immediate operation. Inspection available on request. === LOCATION & DELIVERY === Located in Sittard, Netherlands. Worldwide delivery possible. 💰 Price: €39,500 (EXW, excluding VAT) The Bergmann C804e is an innovative, fully electric dumper with a payload of 4 tons. Thanks to its emission-free drive, rotating seat and all-wheel steering, it provides optimal efficiency and safety on the construction site. Perfect for urban areas, tunnels and low-emission zones. CE-certified, low-maintenance and immediately available from stock at Collé Rental & Sales. === DELIVERY === Crane loading available on request for smooth handling during dispatch. Flexible shipping options tailored to your destination and logistics preferences. All transport is professionally handled by the Collé Rental & Sales logistics team.

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 1 h, power: 4.2 kW (5.71 HP), load capacity: 450 kg, lifting height: 10,000 mm, lifting power: 450 kg/m, platform length: 2,270 mm, platform width: 1,120 mm, overall weight: 2,480 kg, transport length: 2,480 mm, transport width: 1,150 mm, transport height: 1,960 mm, construction height: 2,470 mm, fuel type: electric, tire size: 381 × 127 mm (non-marking), tire condition: 100 %, wheelbase: 1,870 mm, ground clearance: 100 mm, color: red, Equipment: UVV, === KEY SPECIFICATIONS === Year: 2025 Operating hours: 0 h (new) Machine width: 1.15 m Drive system: 4x2 / 2-wheel steer Drivable at full height: Yes Platform extension: Yes (0.90 m) Power: 4.29 kW (2 × 0.87 kW drive motors + 3.42 kW lift motor) Working height: 12.00 m Platform capacity: 408 kg (113 kg extended) Power type: Electric Battery type: Lithium-ion (28.8 V / 175 Ah) Self-levelling outriggers: No Platform dimensions (L × W): 2,270 × 1,120 mm (+ 900 mm extension) Tyres: Non-marking (381×127 mm) CE certification: Yes Weight: 3,060 kg Indoor / Outdoor use: Both === HIGHLIGHTS === Carefully selected from trusted sources with verifiable history. CE certification and full documentation included. Ready for immediate transport and use. Comprehensive technical documentation available. === CONDITION === Brand-new 2025 model in original factory condition. Lithium battery tested and in excellent condition. Immediately available from stock in Sittard. Hfodow Af Aiopfx Aaiok === LOCATION & DELIVERY === Located in Sittard, the Netherlands. Worldwide delivery possible. Price on request (EXW / excluding VAT). The Magni ES1212E is an electric scissor lift with a working height of 12 meters and a platform capacity of 408 kg. Equipped with maintenance-free lithium batteries, non-marking tyres, and an energy recovery system, it offers eco-friendly and efficient operation. Perfect for indoor and outdoor use, featuring a 0.9 m platform extension and proportional control for precise handling. All Magni machines are CE certified, fully tested, and ready for immediate operation. Spare parts and technical support available upon request. === DELIVERY === Crane loading available on request for smooth transport during dispatch. Flexible shipping options tailored to your destination and logistics needs. All shipments are professionally managed by the Collé Rental & Sales logistics team

Year of construction: 2009, condition: used, NH3 refrigeration system. Refrigeration system includes the following: - Compressor 1, GEA Grasso type OS3 - Compressor 2, GEA Grasso type OS3 - NH3 separator - Air condenser - Heat exchanger for energy recovery with pump - 2 x ice water pumps - Brewing water pump - 2 water coolers - Expansion tank with control cabinet for NH3 separator and compressors 1 and 2, with SIMATIC MULTI PANEL touch control Additional title: refrigerant ammonia Brew water flow: 5 m3/h 2 bar Ice water flow: 15 m3/h 2 bar Refrigerant capacity: 85 kg Ammonia Compressor capacity: 145 m³/h Power: Q0: 2 x 119 kW Operation / Control: Siemens S7 Features: 2 x compressors: 145 m³/h, 26 kW with Frequency Converter, 37 kW nominal output; ammonia separator mounted on frame, with brewing water-cooler and ice water-cooler; air condenser on frame 3 x 2.95 kW; heat-exchanger for recovery with pump; 2 x ice water pumps ( 2.2 kW, 15 m3/h, 2 bar ); brewing water pump ( 1.1 kW, 5 m3/h, 2 bar ); expansion tank, max. permissible operating pressure: high pressure side: 22 bar, low pressure side: 16 bar Hodpfexbn Upox Aaiefk

Condition: excellent (used), Year of construction: 2018, operating hours: 11,531 h, functionality: fully functional, machine/vehicle number: CD10040145001, overall weight: 1,648 kg, total length: 1,958 mm, total width: 1,138 mm, total height: 1,857 mm, power: 55 kW (74.78 HP), operating pressure: 10 bar, noise level: 69 dB, intake vacuum (max.): 1 mbar, rotational speed (min.): 3,000 rpm, Equipment: type plate available, The CompAir L55 10 W is a reliable and energy-efficient screw compressor with heat recovery designed for continuous compressed air supply in industrial applications. With its robust design and advanced technology, it offers excellent performance and durability, ideal for demanding operating conditions. This model is used but has few operating hours and is therefore in very good condition. Technical details - Serial number CD10040145001 - Year of manufacture 10.2018 - Operating hours 11,531 h - Built-in compressor V3532 - Compression medium: air - Voltage: 400 V / 3 Ph / 50 Hz - Volume flow 9.51 m³/min - Stage pressure 10 bar - Intake pressure 1.0 bar - Full air flow 117 A - Speed 3,000 min-1 - Engine power 55 kw - Condition: very good For further details see pictures and type plate. Hfsdpfxounzdks Aaiek

Condition: excellent (used), Year of construction: 2010, operating hours: 57,909 h, functionality: fully functional, 37 kW 13 bar Hfsdpfx Ajtwwcpoaijk 6.90 m3/min With energy recovery.

Condition: used, This listing is for the LEEC C330 Classic Incubator The unit is in full working condition and is ready for immediate use Key Specifications Chamber Capacity: 330 litres External Dimensions: 1417 mm (H) × 684 mm (W) × 620 mm (D) Internal Dimensions: 1200 mm (H) × 550 mm (W) × 500 mm (D) Temperature Range: Ambient +5°C to +60°C Temperature Control Accuracy: Typically ±0.1°C at 37°C Temperature Variation: Typically better than ±0.2°C at 37°C Temperature Recovery Time: Approximately 4 minutes Power Rating: 440 watts (maximum) Hedsxhf Umjpfx Aaiofk Weight: 107 kg Shelves Included: 6 Construction: Fully sealed chamber with polished stainless steel and rounded corners for easy cleaning Air Circulation: Fan-assisted for even temperature distribution Safety Features: Over and under temperature alarms, independent overheat safety cut-out, and password-protected settings Controller: Digital microprocessor with Fuzzy Logic and Auto-Tune features Notable Features Energy Efficiency: Low wattage heating elements combined with high-performance thermal insulation ensure excellent temperature stability while minimizing energy consumption. User-Friendly Interface: The digital controller displays both target and actual temperatures in real-time on a two-color display, making it simple to monitor and adjust settings. Enhanced Safety: Programmable alarm thresholds and an independent safety cut-out provide added protection against over-temperature conditions. Maintenance-Friendly Design: The sealed chamber with rounded corners facilitates easy cleaning, and the rear access port allows for safe insertion of temperature monitoring probes.

Condition: new, ⭐⭐⭐⭐⭐ (5.0) ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Excellent Support! ✈️ Plus shipping costs – shipping on request. ✈️ Fast Delivery: Only 4-6 weeks after payment receipt! Important Note: If you would like to receive a quote for an automatic powder coating system, please use the powder coating system configurator on the homepage of our website. ✅✅✅Energy Efficiency Class A+++✅✅✅ ➖➖➖➖➖ ✳️Maintain your liquidity! We offer a variety of financing models to ensure that your investment has the greatest chance of success. Contact us today to learn more about our lease-to-own, warranty, or leasing programs. Hodoggyk Espfx Aaiofk ➖➖➖➖➖ ✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ☘️Environmentally friendly☘️⚡️Green Energy⚡️☘️ ✅Twinline-MA Automatic Powder Coating Booth – Perfect Coating, Fast Color Change✅ The Twinline-MA powder coating booth from Proton Maschinenbau has been developed for automatic and manual application in the electrostatic field and impresses with its efficiency, user-friendliness, and outstanding coating results. ✅Innovative design for quick cleaning: Thanks to the insulating PVC floor and the automatic floor cleaning system, dust accumulation is effectively prevented. The booth can be cleaned quickly and easily without entering – for maximum productivity with minimal effort. ✅Intelligent airflow for maximum efficiency: The Fulair technology ensures targeted air extraction at the entry and exit points. This prevents powder loss into the environment and guarantees ideal conditions in both manual and automatic coating areas. ✅Effective powder recovery: The mono-cyclone with downstream filter system enables a high powder recovery rate. The filters are automatically cleaned by means of compressed air, which significantly reduces the maintenance effort. ✅Robust and flexible design: The booth structure is available in powder-coated steel, stainless steel or entirely made of PVC. The solid construction without moving parts ensures a long service life while maintaining low maintenance costs. ✅Quick integration, short installation time: The Twinline-MA can be easily integrated into existing systems and minimizes downtime. All system components are optimally arranged and offer the operator easy access at all times – whether in operation, during color changes or during maintenance. With the Twinline-MA booth, you are investing in speed, quality and reliability. Be convinced by a modern powder coating system that sets new standards! Request now – Make your company fit for the future! ⭐Follow us for new campaigns⭐ ☀️ 2 YEARS WARRANTY ☀️ ☀️We have CE certificates for all our machines and ATEX certificates for the necessary machines.☀️

Condition: new, Year of construction: 2025, ⭐⭐⭐⭐⭐ (5.0) ⚡ Top Service | Fast Delivery | Excellent Support ✈️ Delivery Time: Only 8 Weeks ✅ Energy Efficiency Class A+++ ☀️ 2-Year Warranty Buy Directly from the Manufacturer – Benefit from Over 40 Years of Experience in Surface Coating Technology! 💶 Flexible Financing Options: Maintain liquidity with our attractive hire purchase, leasing, and warranty programs. Contact us today for details! 🌀 Mono Cyclone & Jet-Pulse Filter Unit for Large Powder Coating Systems Ideal for operations that require efficient powder recovery: Powder is collected beneath the mono cyclone, sifted through a mesh, and transferred to the color station via pneumatic pumps. From there, it is automatically fed back into the powder coating guns. ✔ Key Advantages: No need for an exhaust air duct Clean and convenient powder recovery process Compatible with all automatic powder coating booths Suitable for walk-in type booths as well Optional: Use the Jet-Pulse filter unit alone for an environmentally friendly, recovery-free setup Hodpfx Asdy E A Sjaiofk 🔄 High-Efficiency Recycling Technology Only 4% material loss Maximized powder reuse Fully compatible with Proton MA-RYC-PRO Color Station for optimized performance in automated systems 👉 More details available in our listings or on our website. 🎨 Color Options: Our standard color combinations: Yellow-White Anthracite-White Custom RAL colors are also available upon request – please note that additional charges apply. ✅ Your Benefits at a Glance: Fast delivery in 8 weeks Direct from the manufacturer Energy-efficient (A+++) Comprehensive warranty & support Flexible financing models State-of-the-art powder recovery system

Condition: new, filter area: 11 m², energy consumption: 18 kWh, sheet thickness steel (max.): 2 mm, ⭐⭐⭐⭐⭐ (5.0) ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Great Support! ✈️ 5-week delivery ✈️ Delivery on request possible. ✅✅✅ Energy efficiency class A+++ ✅✅✅ A frequency converter for speed control is integrated. MA-JP12 - 18 KW/H LIST PRICE €22,500 Offer price ►► €15,172 * Gross price. Your net price for commercial customers: €12,750.00 MA-JP12 - V2 - 30 KW/H LIST PRICE €25,500 Offer price ►► €17,500 * Gross price. Your net price for commercial customers: €15,750.00 MA-JP16 - 30 KW/H - LIST PRICE €30,500 Offer price ►► €24,097 * Gross price. Your net price for commercial customers: €20,250.00 ➖➖➖➖➖ ►► Buy Now ◄◄ ✳️ Retain your liquidity! We offer a variety of financing options to ensure your investment has the greatest chance of success. Contact us today to learn more about our lease-purchase, warranty, or leasing programs. ✳️ ➖➖➖➖➖ ►►►⌛⏰ FASTEST delivery time❗ ⌛⏰◄◄◄ ✨✨ Buy directly from the manufacturer and benefit from price and quality advantages! ✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ✅ Versatile: The PROTON dust filter systems have been developed for a wide range of applications and are used in numerous industries. Especially in enclosed spaces and dusty working environments, they ensure a clean atmosphere and improved visibility of the workpiece surfaces – a crucial factor for the quality of the surface coating. ✅ Environmentally friendly & efficient: The environmentally friendly filter systems reliably capture dust particles and return cleaned air to the environment. Our jet-pulse filters are among the most widely used systems for the extraction of dry particles and for process air filtration. ✅ Maximum efficiency with low maintenance: The jet-pulse system is designed for maximum performance while minimizing maintenance time and operating costs. It is used in dust extraction systems, pneumatic conveying systems and for the removal of health-endangering substances from the air. ✅ Modularly expandable & recyclable: For even higher separation performance, the jet-pulse filter can be combined with bag filters or cartridge filters as well as a mono-cyclone. In systems with recovery systems – e.g. for the recycling of powder coatings – mono- or multi-cyclones can be used. ✅ Flexible design: The systems consist of integrated modules and can be adapted in size, material and filter type. Depending on the type of dust and the application, a choice can be made between cartridge or bag filters. ✅ Powerful & sustainable: PROTON dust filter systems impress with their high filtration performance and contribute significantly to improving the quality of work as well as protecting the environment and employees. ⭐Note on prices:⭐ The stated prices do not include a mono-cyclone and apply exclusively to the jet-pulse filter unit. The control cabinet is also not included in the scope of supply. For prices on additional components such as a control cabinet or mono-cyclone, please contact our sales department. ⭐Follow us for new campaigns⭐ ☀️ 2 YEAR WARRANTY ☀️ Hfodpfx Asggyhieaisk

Condition: refurbished (used), Year of construction: 2016, Stainless Slitter 1500x3, made SAMO OCEMI Completely revamped in the year 2016. Technical specifications Thickness minimum: 0,4mm Thickness maximum: Up to 4mm with Rm 400N/mm2 | Up tp 3mm with 700 N/mm2 Coil width: max 1.540 mm. Max coil weight: 16 t Direction: left to right Speed: up to 150 m/min. Scope of supply Hfedpfoymcmfox Aaiek · Coil car, hydraulic, Over floor · Decoiler, hydraulic expansion, with DC motor 28 kW-717-2.200 rpm, for dynamic brake and energy recovery. Stationary disk brake. Motorized snubber roll. Paper rewinder. Alignment. · Coil opener with telescopic table. · Feeding unit with pinch-roll and 3-rolls straightener. · Centering unit (motorized) with 3 flattening rolls (poliurethane). · PVC film applicator (new 2017) · Slitting head, shaft diam.: 200 mm. DC motor 72 kW 780-2.652 rpm + stationary brake. · Turnstile knife charger – 2 arms couples. · Tension pinch-roll DC motor 23 kW 1.960 rpm + stationary brake. Scrap table, movable, with scrap conveyor. · Scrap rewinder, single drum dimension 600x600. Ac motor 15 kW with inverter. · Bypass table (loop) · Braking car (movable) with: - double separating roll - Deburring pinch-roll (new in 2017) - Felt press - Braking rolls-with DC motor 33kw-2.550 rpm for strip tension adjustment and energy recovery. - Cross cutting shear (crop shear) - Deflector roll - Recoiler, hydraulic expansion, separating arm with automatic lifting system. DC motor 114 kW 800-2.400 rpm + stationary brake. · Discharging coil car, over floor, with press arm. · Turnstile arm 4 x 20 t, motorized · Electric EQUIPMENT (NEW in year 2016). Supply voltage 3x380V Consisting of: Cabinet Dimension mm 5.600 x 600. With PLC Siemens S7-300. N. 3 operator switchboards. The main switchboard with HMI touch-screen Siemens Touch · Hydraulic equipment. Hydraulic power pack with oil-air cooling. Manifolds with electric valves on each machine, 24 V DC · Complete safety fences, mechanical/optical. · Cutting tools (knifes approx. 160 pieces, spacers, separating discs..). Documentation Foundation drawings Electric drawings. Hydraulic plan. PLC and HMI Software. CE declaration of Conformity Thickness minimum: 0,4 mm Thickness maximum: Up to 4 mm with Rm 400N/mm2 | Up tp 3 mm with 700 N/mm2 Coil width: max 1.540 mm Max coil weight: 16 t Speed: up to 150 m/min Direction: left to right

Condition: good (used), Wexiödisk WD-100GR pellet washer The WD-100GR is a granule pot washing machine that can wash with or without granules. The HACCP function in the machine's control program ensures compliance with hygiene requirements. The machine is a continuous model for simplified logistics and improved ergonomics and hygiene. It is also equipped with an efficient spinning wheel technology. Steam reduction as standard Save energy and drying time with the ECO-FLOW condensing unit No pre-washing or scrubbing by hand thanks to powerful washing with water and granules Great hygiene and fast drying with spin cycles Hfjdpfxef Hp Tpj Aaiek Heat recovery and a condensation battery reduce the steam in the room Complete dishwashing system with loading table and trolley Easy maintenance - can be performed from the front or the side Effective dishwashing and high capacity with double rinse system Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more dishwashers in our store International shipping on request!

Condition: new, power: 110 kW (149.56 HP), fuel type: diesel, next inspection (TÜV): 02/2028, color: white, emission class: euro6, number of seats: 2, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, sliding door, traction control, Seat covers in fabric design Double Grid, automatic transmission, air conditioning with manual control in the driver's cab, daytime running lights (always on when driving), touchscreen, driver's airbag, sun visors with ticket pocket on the driver's side and airbag label on the passenger sun visor, radio Composition Colour, MP3 interface, emergency call system eCall, electronic stabilization program ABS ASR EDS hill start assist brake assist, central locking with radio remote control and interior operation, power steering electromechanically controlled depending on speed, steering column height and length adjustable, ParkPilot in the rear area, cruise control system including speed limiter, immobilizer (electronic), start-stop system with brake energy recovery, headrests height adjustable front and rear, exterior mirrors electrically adjustable and heated, 4 steel wheels 6.5 J x 16 in 20 hole design, lumbar supports for left and right individual seats in the 1st row of seats (both manually adjustable), laminated glass windscreen with heat-insulating glazing, Tire Mobility Set: 12-volt compressor and tire sealant, non-smoking vehicle, headlight range adjustment, service history, sliding door on the right in the loading/passenger compartment, paintwork: candy white, prepared for We Connect and We Connect Plus, heated tailgate with window, Transporter lettering on the fender without lettering on the rear, height adjustment for left single seat in the driver's cab, swivel seat on the right in the 1st row of seats (not height-adjustable), armrests for both seats in the driver's cab, 1 12-volt socket in the dashboard, approval with up to 3 seats, crosswind assistant, battery/generator, heat-insulating glass (green), tires 205/65 R 16 C 1 T optimized for rolling resistance, hill start assist, fuel tank with 70 l tank volume, standard suspension and damping, type plate for commercial vehicle with EC type approval with Weight specification with COC papers, steering wheel, full wheel covers for 16-wheels, 16-chassis with 16-brake system, bumpers in grey, standard sound deadening measures, loading sill protection (inside) in plastic, unpainted door trim, normal roof (with attachment points for roof rack systems: 8 for the short wheelbase, 10 for the long wheelbase), seat on the left in the 1st row of seats, emissions standard Euro 6d ISC-FCM, tailgate closure without unlocking function from the inside, airbags for driver and front passenger with passenger airbag deactivation, glove compartment without lighting, rubber floor covering in the driver's cab, comfort headliner in the driver's cab, interior roof paneling made of hardboard in the passenger/loading area, side paneling (half-height) made of hardboard in the loading area, registration as a truck, transport protection measures without surface protection film, folding grab handles on the roof frame, hinges for rear doors/tailgate in standard design, lashing eyes for securing the load, outside mirror housings and door handles in black, H7 halogen double headlights, 4-stage adjustable windscreen wiper interval control, standard rear lights, interior lighting in the loading/passenger compartment, non-smoking version, mobile phone interface, prior sale and errors for this offer are expressly reserved. The vehicle description is only for general identification of the vehicle and does not constitute a guarantee in the sense of sales law. The only decisive factors are the agreements in the order confi Hjdpfx Asvib Enjaiefk

Condition: used, The SUNCOMBE SteriWasher is an innovative, robust, high-performance, and validatable parts washing system designed for use in the pharmaceutical, biotechnology, food and beverage, healthcare, and other critical sectors. The wash chamber is accessed via a sturdy hinged door and is constructed from 316 stainless steel, featuring a hygienic design. The combination of specially developed variable-power spray technologies enables the washer to deliver high-energy cleaning cycles alongside an energy-efficient rinsing process, easily selectable via simple recipe selection. Description SteriWasher™ parts washers utilize both proven and innovative technologies to provide an environmentally friendly cleaning solution with low water and energy consumption. They are suitable for production and research environments and can handle equipment ranging from critical small parts and tools to large mixers, drums, and containers. The product range is available with chamber sizes from 0.6 m x 0.6 m x 0.6 m up to the largest at 1.5 m x 1.5 m x 1.5 m. Customized variants with bespoke chamber sizes are also available to meet your requirements. The washers are fitted with crevice-free inserts and feature an airtight, leak-proof inflatable door seal for the complete unit and wash chamber. They come with standard or custom racks, with individually validated cleaning positions. These racks are removable and can be loaded onto mobile carts for easy loading and unloading. Models are available in single-door or double-door configurations for pass-through requirements. Washers are offered in single-door, straight double-door, or 90-degree double-door pass-through versions and are manufactured from 316 stainless steel to cGMP, EHEDG, ASME BPE, and GAMP standards, making them ideal for your wash area or cleanrooms. Features • 316L stainless steel chamber with radiused corners, sloped design, and crevice-free construction • Standard and custom chamber sizes • One or two chemical dosing systems • Automatically locking hinged door with optional window and internal lighting • Inflatable door seal for maximum safety • Load trolleys and racks specifically engineered for your items • Hygienic pneumatically actuated valves and instruments • Hygienic stainless steel pumps • Stainless steel covers • HEPA-filtered air drying and cooling • Pharmaceutical-grade washing machine Specification KVP Philosophy: Total loss, full or partial recovery Discharge temperatures: Ambient up to 90°C (aqueous) / ambient (solvents) Material: 316 stainless steel, Duplex, or Hastelloy Hodpfxsyf N Ime Aaisfk Operating temperature: Ambient up to 95°C (120°C turbo drying cycle) Operating voltage: 230VAC or 400VAC (24VDC control) Automation: CIPSuite Level 2000 to 4000 (optional DCS integration) Reporting: Printed records available, optional 21CFR11 electronic records and batch reporting.

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, pressure: 70 bar, total height: 1,600 mm, total width: 800 mm, total length: 1,200 mm, temperature: 40 °C, operating pressure: 70 bar, noise level: 80 dB, Equipment: documentation/manual, rotational speed infinitely variable, RO 510-DT2-15S – Compact Seawater Reverse Osmosis System, approx. 15,000 L/day Potable Water Compact, fully automated reverse osmosis system for the production of hygienic drinking and process water from natural seawater. Ideal for maritime applications, island supply, hotels, as well as small-scale industrial and utility operations. Technical Specifications Type: RO 510-DT2-15S Process: Reverse osmosis with Disc-Tube (DT) technology Permeate Output: Approx. 15,000 L/day (15 m³/day, depending on operating conditions) Feed Water: Seawater with high conductivity, approx. 55,000 µS/cm (high salinity) Permeate Quality: Drinking water, approx. 500 mg/L residual minerals (reference value) Recovery Rate: Approx. 30% (typical operating range) at 55,000 µS/cm conductivity Design Temperature: Approx. 25°C (Operating range: approx. −2 to 35°C) Process Technology & Configuration DT module with open feed channel – highly fouling-tolerant and fully cleanable Mechanical pre-filtration (high-performance filter + 10 µm cartridge filter) Chemical pre-treatment of feed water (acid dosing) generally not required Integrated rinsing and CIP (clean-in-place) function, PLC controlled Skid-mounted on stainless steel frame (AISI 316) High-pressure lines in stainless steel, low-pressure section in seawater-resistant plastic Pumped seawater components made from corrosion-resistant materials Operating & Energy Data Feed Water Flow: Approx. 1,000 L/h (reference value) Hfsdpfx Asw Uf Iheaijk RO Module Operating Pressure: High pressure range, designed for seawater desalination Power supply: 230 V, 50 Hz, single phase Connected load: Approx. 6 kW Control, Monitoring & Safety Local operator panel with integrated PLC control Monitoring of pressures, flows, conductivity, and operating hours Automatic shutdown in case of: - Insufficient feed pressure - Exceeding permissible operating pressure - Overpressure in permeate/concentrate lines - Exceeding defined conductivity limits (with automatic redirection to drain) Automatic “Stop & Rinse” function: Permeate flushes all seawater-contacted components on shutdown, reducing fouling during system standby Dimensions & Weight (Skid) L × W × H: Approx. 1,190 × 705 × 1,500 mm Weight: Approx. 530 kg (dry), approx. 605 kg (operating) Typical Applications Vessels, offshore platforms, ports Island and coastal supply Hotels, resorts, small industrial and utility operations Backup or peak load system for existing potable water production Additional technical documentation, photos, and information on scope of supply, pricing, and availability are available on request.

Year of construction: 2018, condition: used, functionality: fully functional, Information about the machine: The machine comes from a metal construction company specializing in the production of windows, doors, and façades made from aluminum. It was purchased in 2018 to relieve several 5-axis machines, specifically for the manufacturing of aluminum front doors. Due to operational restructuring, this machine was no longer used and was released for sale. The machine has been thoroughly cleaned, inspected, and serviced at Weyand’s facility. All worn parts have been replaced. Part programs can be created either directly at the machine (eluCam) or using the included office software eluCad. Also included is the software option package for data import of ECW, NCW, and V6 files, e.g., from LogiKal or Wictop. Machine description: - Efficient machining of aluminum, plastic, and steel profiles - Continuously positionable A-axis from -120 to +120 degrees - Linear guides for clamp movement - Processing results are improved by intelligent control technology - Rapid positioning of the machining unit with speeds up to 120 m/min thanks to dynamic servo drives - Thread cutting without compensating chuck - Automatic clamp recognition and positioning - Automatic tool changer - 4-axis control - No reference run required for main axes due to absolute encoder systems - Collision avoidance via automatic clamp recognition and positioning - Power torque milling motor with closed-loop speed control for short spindle ramp-up and braking times - Certified, drive-integrated safety functions Low power consumption due to intelligent control. Energy recovery via DC-link coupling of the axis drives with regenerative feedback and braking energy buffering. Green-Line cooling unit for the control cabinet with reduced energy consumption. - Windows operating system - 15" flat screen, USB ports and network connection - Simple and convenient program entry using eluCam at the operating terminal – even during machining - Remote maintenance via TCP/IP with internet access Equipment: - Safety enclosure for operator protection - Four horizontal pneumatic clamping units - Material stop left - Minimum quantity lubrication - Handheld control device - Depth gauge Technical data: - Max. machining length (without face-side machining): 4,050 mm - X-axis travel: 4,176 mm, Vmax. 120 m/min - Y-axis travel: 1,040 mm, Vmax. 60 m/min - Z-axis travel: 540 mm, Vmax. 30 m/min - Machining directions: 3+2 (top, rear, front) - Positioning accuracy: +/- 0.1 mm - Max. spindle speed: 20,000 rpm - Spindle power: 7 kW, S1 (water-cooled) - Tool holder: HSK-F63 - Automatic tool change - 12 tool positions in automatic magazine - Max. disk cutter diameter: 120 mm - Max. tool length (from taper): 150 mm - Automatic clamp movement - Spanner Basic (with round guide) - Software: eluCam - Compressed air supply: >7 bar - Electrical connection: 400 V, 50 Hz, 22 A - Air consumption per minute approx. 185 l with spray Accessories for the machine (used): - Full enclosure SBZ122/7x (rear wall + roof) - Complete HSK-F63 d16 L=155 holder for disk cutter - Disk cutter D=92x6.0 mm Z=14 d=16, carbide teeth Hfedjyr H Abjpfx Aaijk - Right stop SBZ 122170171173 with second clamping circle, for overlength processing - Various used tool holders and cutters - ESTA swarf extraction system eluCad - License for connection to eluCad - eluCad data import package for ECW, NCW, and V6 files

Condition: new, Year of construction: 2026, functionality: fully functional, The system is a fully integrated, automated industrial powder coating line engineered for high-throughput production, process stability, and superior surface finishing quality. It combines a multi-stage chemical pretreatment washer, a high-efficiency electrostatic powder coating booth, a controlled thermal curing oven, and an overhead rail conveyor system designed for continuous or indexed part transportation. The chemical pretreatment washer is designed as a multi-stage surface preparation unit, including degreasing, rinsing, phosphating, and passivation phases. It is constructed from high-grade stainless steel (AISI 304/316) to ensure long-term chemical resistance and structural durability. High-pressure centrifugal pumps along with optimized spray nozzle arrays guarantee full and uniform coverage of complex geometries. The system incorporates closed-loop chemical recirculation, advanced filtration units, and automatic monitoring of pH, conductivity, and bath temperature, ensuring consistent surface activation while minimizing chemical consumption and operational waste. The electrostatic powder coating booth is designed for maximum transfer efficiency and minimal material loss. It features a high-performance powder recovery system (cyclone or cartridge filtration type), achieving recovery rates above 95%, which significantly reduces operating costs. The booth is constructed with anti-static architecture to prevent powder build-up and to ensure stable electrostatic field distribution. It is fully compatible with both manual and automatic spray gun systems, enabling flexible integration depending on production requirements. The curing oven is a high-performance thermal system designed to provide uniform heat distribution across the entire chamber, with temperature deviation controlled within ±2°C. It operates with forced convection airflow using high-efficiency industrial fans, ensuring homogeneous curing conditions for all coated parts. The heating system can be configured with gas, diesel, or electric resistance elements, depending on the available energy infrastructure. High-density insulated panels minimize thermal losses, while PLC-based control allows precise management of curing profiles and process repeatability, ensuring optimal polymer cross-linking and defect-free surface finishes. The overhead conveyor system provides continuous or step-by-step transport of parts throughout all process stages. It is constructed with heavy-duty chains and high-temperature resistant components suitable for demanding industrial environments. The system includes variable speed control to optimize dwell times in each process zone, enhancing throughput efficiency and process synchronization. Its ergonomic design minimizes manual handling while maximizing production flow stability. Hfedpfsy Htg Dox Aaijk From an engineering standpoint, the complete line is designed for maximum operational efficiency, reduced lifecycle cost, and high process reliability. Energy-optimized thermal systems, chemical recovery circuits, and high transfer efficiency coating technology significantly lower total operating expenses while maintaining consistent coating quality. The modular architecture allows for future expansion and customization, making the system suitable for scalable industrial applications.

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 3,500 mm, total length: 7,050 mm, total width: 4,100 mm, volume flow: 36,000 m³/h, temperature: 80 °C, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), Equipment: cabin, lighting, Paint and Drying Booth Hjdpfxexa H Ewo Aaiefk It is the centerpiece of your entire painting operation: the combined paint and drying booth. (Alternatively available as a separate paint booth with a dedicated dryer.) Our solutions feature full-surface ceiling filters and, optionally, full-surface floor extraction with drive-over grating or wall extraction at the position of your choice. If you wish to further increase the efficiency of the system beyond heat recovery and infinitely variable control via frequency converter, we can also offer you a sectional control system. This enables you, for example when doing spot repairs or partial booth loading (such as painting only add-on parts), to activate only the section where the parts are located. This allows you to operate with a reduced air volume, save energy, and minimize costs, all without compromising quality. Feel free to contact us – we would be happy to demonstrate these options in detail. Do you have any questions or suggestions? We are happy to assist you.

Year of construction: 2020, operating hours: 1,157 h, condition: excellent (used), functionality: fully functional, For sale: Kiverco PS123 Waste Sorting Station, fully equipped, in excellent working condition. This high-performance, mobile unit is designed for efficient sorting and recycling of a wide range of materials in construction, demolition, and commercial waste. Key Features: Year of Manufacture: 2020 Operating Hours: 1,157 hours Power Supply: Integrated diesel-electric generator (can be operated autonomously or connected to mains) Condition: Excellent, ready for immediate use (video available demonstrating full operational capabilities) Location: Inspection available upon request Technical Specifications: Sorting Capacity: 10 manual sorting bays (high throughput for increased productivity) Magnetic Separation: Integrated overband magnet for automatic recovery of ferrous metals Air Separation: Windshifter system for efficient separation of light fractions (plastics, paper, etc.) Conveyor System: 1,200 mm wide adjustable picking belt Design: Modular and mobile for quick setup and easy relocation to different processing sites Operator Comfort: Fully enclosed, weatherproof and insulated cabin, equipped with low-energy lighting and optional climate control (heating/cooling) Quick Setup: Hydraulic jack leg system allows rapid, crane-free deployment and secure positioning Safety: Emergency stop switches and manual override at every station Efficiency: Significantly reduces manual labor by automating recovery of ferrous metals and light materials Ideal Applications: - Construction & Demolition Waste (C&D) - Commercial & Industrial Recycling Hedpey E Skljfx Aaijfk - Waste Processing Plants - Municipal Solid Waste (MSW) - Mobile recycling operations

Year of construction: 2023, condition: like new (used), Binder FP 400 Laboratory Oven Year of manufacture: 2023. Like new, unused. 2-year warranty on spare parts Binder FP 400 Material Test Chamber The BINDER FP 400 material test chamber is specifically designed for demanding applications in biological, chemical, medical, and food industry laboratories. It features exceptionally precise temperature control and uniform temperature distribution throughout the entire chamber. This makes the device an ideal foundation for reproducible materials and stability testing, incubation, or developmental processes. Compared to similar test or climate chambers, it sets itself apart with high efficiency, energy savings, and user-friendly operation — greatly simplifying daily laboratory workflows. Technical features and advantages in everyday laboratory use: The advanced FP 400 technology meets the highest standards of safety, energy efficiency, and ease of operation. This material test oven allows precise control of temperature conditions across a wide range of testing and development processes—from microbiological cultivation and chemical reaction studies to stability testing of sensitive samples. Key technical specifications at a glance: - Temperature range: approx. 5 °C above ambient up to max. 300 °C - Internal volume: 400 liters; maximum total load capacity: 90 kg (up to 35 kg per shelf) - Temporal temperature deviation: ±0.3 K; spatial temperature variation: 1 K at 70 °C, 2.5 K at 150 °C, 4.8 K at 300 °C - External dimensions: 1235 x 1025 x 765 mm (W x H x D); internal dimensions: 1000 x 800 x 510 mm (W x H x D) - Power supply: 400 V, 3 N ~, 3.4 kW, 50/60 Hz - Power consumption: 520 W (70 °C), 1200 W (150 °C), 2340 W (300 °C) - Protection class: IP 20 according to EN 60529, certified according to DIN 12880 Additional features: - Interior made of high-quality stainless steel – ensures maximum durability and exceptionally easy cleaning - Digital temperature display and intuitive operation via ergonomic control panel - Practical door lock; quiet operation; low working noise - Environmentally friendly and energy saving due to low energy consumption and advanced insulation design Hedpfx Aaeyt A Eneisfk - Flexible interior configuration with optional shelves and drawers (up to 10 shelves can be installed) - Two inner glass doors allow quick visual inspection without affecting temperature levels - Optimized air flow ensures optimal temperature uniformity - Easy to transport and install thanks to its compact design and ergonomic handle The steam chamber has a large capacity of 498 liters, and the advanced air exchange system (16–18 exchanges per hour depending on temperature) ensures rapid stabilization of conditions. The recovery time to set parameters after a brief door opening remains minimal, even at high temperatures—crucial for frequent routine operations. Compliance with globally recognized standards DIN 12880 and EN 60529 (IP 20) guarantees safe and standards-compliant operation for daily use. This device is thus perfectly suited for quality control laboratories, industrial test applications, and academic research projects where the highest precision is required.

Year of construction: 1995, condition: like new (used), The bucket drainer is the perfect machine for the recovery of 0-4 sand, with low energy consumption and little maintenance. - Flow rate: 50 cubic meters/h Hfjdpju Avrtjfx Aaijk - Motor 5.5 Kw.