Used Engel Victory 1050/150 Tech (2009) for sale (15,677)

Condition: good (used), Year of construction: 2001, Ref. no.: 18092 Manufacturer: ENGEL Type: ES 1350H 200W / 300HL-2F Year of construction: 2001 Clamping unit Clamping force: 300 ton Opening stroke: 855 mm Platen size (h x v): 1050 x 650 mm Injection unit Screw diameter: 60 +35 mm Injection volume: 735 +135 cm³ Shot weight: 662 + 122 g Injection pressure: 1834 +1620 bar Measurements and weight Dimensions: 7,75 x 2,35 x 2,6 m Machine weight: 24780 kg Further information: ENGEL ES 1350H200W/300HL-2F — 2K Injection Moulding Machine This machine from the prestigious Austrian manufacturer ENGEL, built in 2001, features a clamping force of 300 tonnes and a true 2K L-configuration in horizontal layout. Motor and Hydraulic System The machine is equipped with a powerful electric motor coupled to a high-pressure hydraulic pump group. The electric motor continuously drives the hydraulic pump, providing pressurised oil flow throughout the entire system. This pressurised oil feeds the clamping cylinder, the injection pistons of both units, and the ejector system. The thick red hydraulic hoses visible behind Unit B carry this high-pressure oil flow — both units are supplied via independent hydraulic circuits, allowing Unit A and Unit B to operate simultaneously without influencing each other. Dcodpfx Aowm Iy Ejqcoh Operating Principle The two independent injection units are positioned at 90° to each other — in an L-shape. The mould is locked with 300 tonnes of clamping force. Unit A injects the primary material into the mould at 1834 bar. Immediately afterwards, Unit B injects the second material or colour from a 90° angle into the same mould at 1620 bar. The two materials bond at a molecular level inside the mould, cooling is completed and the ejectors push out the finished 2K part as a single piece. No gluing, screwing or assembly is required — two materials emerge as one single part in a single cycle. Applications Automotive interior and exterior trim parts, large technical plastic components, parts combining a rigid body with a soft grip surface, two-colour large-surface parts.

Condition: good (used), Year of construction: 2021, functionality: fully functional, PUR melting device for aluminum pouches/cartridges, with hose and filling head for use on edge banding machines Weight approx. 73 kg Melting capacity up to 2 kg Gear pump All heaters can be adjusted separately With electronic interface for glue level detection in the gluing section of the edge banding machine (level sensor "Tippkemper" for glue application, provided by the edge banding machine manufacturer) Dsdpfey S Rw Rex Aqcsch Connection value 400 V, 50 Hz, 3Ph, N Device delivered completely cleaned and with PUR cleaner.

Condition: excellent (used), CATALOGUE NUMBER 8008 TECHNICAL DATA - Number of clamping areas: 2 - Manually adjustable side clamps: 2 x 6 pcs - Pneumatic top clamps: 2 x 2 pcs - Max. length of bonded elements: 3000 mm - Max. height of bonded elements: 1000 mm - Max. thickness of bonded elements: 100 mm - Dimensions (L/W/H): 3000 x 1300 x 1650 mm - Weight: approx. 600 kg ADVANTAGES - Two working areas Dcsdpfxey T Rdyj Aqceh - Bonding length: 3000 mm - Unpainted - Mobile – on wheels - Used press, very good condition Net price: 12900 PLN Net price: 3071 EUR, depending on the exchange rate of 4.20 EUR (Prices are subject to change due to significant fluctuations)

Condition: excellent (used), For sale: Industrial electric motor with DC electromagnetic brake. Complete drive unit suitable for use in industrial machinery, overhead cranes, hoists, conveyors, and other equipment where shaft stoppage is required immediately upon power disconnection. The motor has been removed from industrial machinery. Visual condition is very good – standard signs of use, technically flawless. The electromagnetic brake ensures instant shaft stop and locking, a feature commonly used in drives requiring a high level of safety. Technical details: Motor manufacturer: Cantoni Motor type: 3-phase Power: 5.5 kW Voltage: 400 V Frequency: 50 Hz Speed: approx. 950 rpm Protection class: IP55 Insulation class: F Brake: DC (direct current) Braking torque: 150 Nm Brake supply: 180 V / 75 W Djdpfxoyridbs Aqcjch Year of manufacture: 2018 Made in the EU PRICE IS PER PIECE.

Condition: excellent (used), Year of construction: 2007, operating hours: 102,000 h, clamping force: 6,500 kN, DUO 5550/650 Advanced Year 2007 Clamping force: 6500 kN Screw: D90, S6, tempered, with flight armouring and ionitriding, abrasion resistant Control unit: CC200 A01 Languages: Slovenian (SL), German (DE) Operating hours: 102,000 1x core mowing platen 1x core pull, additional, on movable platen Mold height increase of 200 mm Variant C, according to the technical sales manual (Min. mold height remains standard, max. mold height increases, platen stroke remains standard, max. platen distance remains standard) Connections for external filter station 8x mold heating control Expansion module for 8 temperature measuring or control points Standard 8-way cooling water flow regulator (0-10 l/min) Cooling water flow regulator, 10-way Magnetic mold clamping platen system TECNOMAGNETE, temperature resistant up to 120 degrees C, incl. interface Euromap 70.1, nozzle adaptation and assembly ENGEL ROBOTER TYPE ERC 63-F X-Max. travel distance: 100 mm Total Y-axis length: 900 + 900 mm (tandem) Z-total: 2360 mm C-axis (125 Nm) 2 switchable vacuum/compressed air circuits Djdsy Ug Ahepfx Aqcjch RC 200 integrated with C30 E handheld control unit

Condition: good (used), Year of construction: 2007, Clamping force: 1000 t Screw diameter: 105 mm Distance between tie bars V: 1150 mm Dedpfx Aqey Ukfmocjch Distance between tie bars H: 1400 mm Shot volume: 4160 cm3 Type: Horizontal Drive: Hydraulic KUKA ROBOT 6 axes

Condition: excellent (used), Year of construction: 2011, Clamping force: 650 t Screw diameter: 90 mm Distance between tie bars V: 960 mm Distance between tie bars H: 1100 mm Shot volume: 2740 cm3 Type: Horizontal Drive: Hydraulic VIPER 40 Linear robot available Dcodey Uffhjpfx Aqcsh The machine has approximately 61,600 operating hours. 6 core pulls on the moving platen, 2 cores and 4 cascade valves on the fixed platen.

Condition: excellent (used), Year of construction: 2016, clamping force: 4,500 kN, Clamping force: 450 t Dsdpsy Ufd Rsfx Aqcsch Screw diameter: 55 mm / 35 mm Distance between tie bars V: 830 mm Distance between tie bars H: 910 mm Shot volume: 295 cm3 Type: Multicomponent Drive: Hydraulic \+ robot Wittmann \+ rotary table

Condition: new, spindle speed (max.): 3,200 rpm, spindle speed (min.): 72 rpm, spindle mount: MK 4, table width: 240 mm, table length: 800 mm, – MK4 – 75/3200 rpm – Thread cutting function – Digital 3-axis display – Height-adjustable drilling head Dcjdpey R E N Eefx Aqcsh – Rotatable drilling head – Table 800 × 240 mm – Gear drive – 2-speed motor – Safety guard – Emergency stop – Coolant system – Lighting – Documentation – 400V

Condition: new, functionality: fully functional, Year of construction: 2026, load capacity: 500 kg, lifting height: 1,410 mm, free lift: 1,350 mm, fuel type: electric, mast type: mono, construction height: 1,770 mm, battery capacity: 9 Ah, battery voltage: 48 V, battery weight: 9 kg, fork length: 1,200 mm, fork width: 540 mm, empty load weight: 220 kg, total height: 1,770 mm, total length: 1,640 mm, total width: 780 mm, color: blue, Equipment: CE marking, full service history, VANLIFT is a unique piece of logistics equipment in the cargo-handling sector, allowing for the loading and unloading of pallets up to 500 kg into and out of both light commercial vehicles and heavy-duty trucks. It allows for safe and instant loading. No additional help or equipment is required. It can be transferred between vehicles. Significantly reduces downtime and loading time. Its use does not take up significant weight or space. VANLIFT is a groundbreaking development in the material-handling market. On its own, it can offer a more efficient solution than all currently available similar products. Dcsdpfxoy S S Drj Aqcsh

Condition: good (used), turning height: 1,500 mm, workpiece weight (max.): 20,000 kg, turning diameter: 2,400 mm, Manufacturer: VIPER Type: VTL 20/24 M Control: Fanuc Oi-TD Year of construction: 2008 X Stroke 1835mm Z Stroke 1000mm Table load 20 Ton Ram size 230 x 230 mm Stroke cross rail 800 mm Stroke crossrail in 5 steps each 200 mm Live tools 2000 rpm Power live tools 15 kW ATC 18 station max L = 450 mm Taper BT50 BIG PLUS Full C-Axis 360,000 Under power in AEROSPACE precision plant 2020 Table bearing replaced 2020 Ram bearing replaced 2025 new chip conveyor Dcedpfx Aov R Di Soqcsh Specifications Metric US standard Max. turning diameter 2400mm Table diameter Ø 2000 mm Tool changer 18 Speed 200 rpm Power 48 kW Max. turning height 1500 mm C-axis 360,000 ° Dimensions (estimate) Length 9,300 mm Width 6,300 mm Height 6,700 mm Weight 48,000 kg Please note: The information on this page has been obtained to the best of our knowledge and belief, and where possible, from the manufacturer. The information is provided in good faith, but its accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contractual terms. We recommend that you check all important details.

Condition: new, rotational speed (max.): 1,600 rpm, rotational speed (min.): 75 rpm, – MK4 – 75/1600 rpm – Right- and left-hand rotation – Thread cutting function – Height-adjustable drilling unit Dsdpfxsy Rx Dio Aqcjch – Swiveling drilling unit – Gear drive – Safety cover – Emergency stop – Documentation – 400V

Condition: excellent (used), Catalog number 7308 TECHNICAL DATA - Track width: 250 mm - Roller width: 350 mm - Roller diameter: 80 mm - Max. saw blade diameter: 400 mm - Saw blade bore diameter: 80 mm - Max. cutting height: 150 mm - Table width with clearance: 700 mm - Table length: 1790 mm Dcjdpoy S Ahbofx Aqcjh Top, in order: - Pawls - Pressure roller, slip type - Pawls - Pressure roller, smooth type - Roller with saws - Smooth pressure roller, 2 pcs Bottom: - Guide strip - Smooth slip roller - Pawls - Track Infeed table: - Roller width: 500 mm - Number of rollers: 3 pcs - Total dimension of infeed table (L/W/H): 580x530x900 mm Outfeed table: - Roller width: 500 mm - Number of rollers: 6 pcs - Total dimension of outfeed table (L/W/H): 1210x535x900 mm - Centralized lubrication - Stepless feed speed adjustment - Main motor: 37 kW - Extraction nozzle diameter: 140 mm - Overall dimension of the multi-blade saw (L/W/H): 2000x1450x2000 mm - Total weight approx. 3000 kg ADVANTAGES – German manufacturing – High cutting height – Infeed and outfeed tables – Used multi-blade saw, in very good condition Net price: 46,900 PLN Net price: 11,160 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (The price may change in case of significant exchange rate fluctuations)

Condition: used, Year of construction: 2000, operating hours: 89,978 h, functionality: fully functional, clamping force: 4,000 kN, screw diameter: 60 mm, displacement volume: 848 cm³, injection weight: 763 g, mold height (min.): 350 mm, opening stroke: 950 mm, plate width: 1,300 mm, plate height: 1,080 mm, installation height: 950 mm, Engel ES 2050/350 HL-V machine immediately available. Machine can be inspected in operation. Includes handling robot. Equipped with 2 DS core pulls, 6 integrated heating zones, and 1 air valve. Dcodpfx Aox Ex Azjqcoh

Condition: used, Year of construction: 1998, functionality: fully functional, Equipment: documentation/manual, 2-axis CNC lathe built on a MORI SEIKI SL-25 base, manufactured in 1998, compliant with CE standards. CNC FANUC 0-T control. Flat guides. ASA 8" spindle. 250mm self-centering chuck. 75mm bar capacity. Maximum turning diameter over the bed: 520mm. Maximum turning diameter over the slide: 350mm. Maximum turning diameter: 550mm. Maximum spindle power: 18.5Kw. Weight: approximately 5,500 kg. Complete with a hydraulic self-centering chuck from KITAGAWA. Programmable tailstock with hydraulic cylinder. Automatic tool turret with 12 positions. Presetting function. Chip conveyor. Dodpfoy S Ry Eex Aqcjch

Condition: used, Year of construction: 2022, operating hours: 7,148 h, functionality: fully functional, machine/vehicle number: 252315, clamping force: 17,000 kN, screw diameter: 120 mm, displacement volume: 7,729 cm³, mold height (min.): 800 mm, ejector force: 230,000 N, ejector stroke: 300 mm, opening stroke: 2,550 mm, plate length: 2,420 mm, plate width: 2,170 mm, pressure: 2,300 bar, type of input current: three-phase, input frequency: 50 Hz, For sale is a modern and fully equipped production cell consisting of an ENGEL DUO 12060/1700 hydraulic injection molding machine and an ENGEL VIPER 60 RC300 Integrated linear robot. The machine was manufactured in 2024 and is designed for the production of large technical parts, automotive components, industrial containers, and parts with high quality requirements. ENGEL DUO 12060/1700 Injection Molding Machine Key parameters: - Clamping force: 17,000 kN (1700 tons) - Injection unit: 12060 - Screw diameter: 120 mm - Injection volume: up to 7729 cm³ - Injection pressure: up to 2300 bar - Injection rate: up to 1875 cm³/s - Opening stroke: 2550 mm - Maximum mold platen distance: 3350 mm - Platen dimensions: 2420 × 2170 mm - Drive power: 176 kW - Control system: ENGEL CC300 - Control language: Polish / English Machine equipment: - ENGEL ecodrive servo hydraulics energy-saving system - iQ weight control - iQ clamp control - iQ melt control - Autoprotect process monitoring - 92-zone mold heating control - Hydraulic and pneumatic core pulls - Ceramic heaters - Cylinder insulation - ecograph / ecobalance system - MES preparation – EUROMAP 77 / OPC UA - Complete Euromap interfaces - Extended mold cooling - Special design for the automotive industry - PL documentation - Special industrial ENGEL coating Includes ENGEL VIPER 60 RC300 Integrated robot Complete automation of production integrated with the machine. Robot parameters: Model: ENGEL VIPER 60 RC300 - Payload: up to 47 kg Dcedpey Tuhijfx Aqceh - Z-axis stroke: 4280 mm - X-axis stroke: 1800 mm - Y-axis stroke: 2600 mm - Servo axes B and C - Full integration with CC300 - HOP C10 operator panel - Automatic lubrication - PL/EN control - FB100 conveyor belt included - Complete safety guarding

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, overall weight: 30 kg, Factory liquidation for mask production. Installed in 2021, out of operation since March 2022. The equipment has already been dismantled and is ready for delivery. Stationary industrial vacuum cleaner Power: 2.2 kW Dcodpfxexqghte Aqceh Airflow: 300 m³/min Suction connection: 40/50 mm Weight: 30 kg

Condition: refurbished (used), battery capacity: 930 Ah, battery voltage: 80 V, total height: 784 mm, total length: 1,028 mm, total width: 1,000 mm, Tested forklift battery for your forklift truck - 80V 6PZS 930Ah - DIN A + 1 year warranty + Includes Aquamatik water refilling system + Includes end cell connectors & REMA 320 plug (other plug types can be fitted if required) + Capacity: min. 90-100% (C5 capacity test protocol will be provided on delivery) + Year of manufacture: 2024 Dimensions: Length 1,028 mm Width 1,000 mm Height 784 mm Weight: approx. 2,240 kg Suitable for the following models, among others: Dcedpfxey Rnpzj Aqceh Linde E 100 / 600 - 1471-00 Linde E 120 / 1200 - 1471-00 Linde E 120 / 600 - 1471-00 Linde E 140 / 1200 - 1471-00 Linde E 140 / 600 - 1471-00 Linde E 150 / 1200 - 1471-00 Linde E 150 / 600 - 1471-00 Linde E 16 - 386-02 - side battery change Linde E 160 / 1200 - 1471-00 Linde E 160 / 600 - 1471-00 Linde E 180 / 600 - 1471-00 Linde E 180 / 900 - 1471-00 Linde E 35 / 600 L - 388-00 Linde E 40 - 388-00 Linde E 40 / 600 HL - 1254-01 Linde E 40 / 600 HL - 388-00 Linde E 40 / 600 L - 388-00 Linde E 40 HL - 388-00 Linde E 45 / 600 HL - 1254-01 Linde E 45 / 600 HL - 388-00 Linde E 45 / 600 HL - 388-00 - side battery change Linde E 45 / 600 L - 388-00 Linde E 45 HL - 388-00 Linde E 50 - 388-00 Linde E 50 / 600 HL - 1254-01 Linde E 50 / 600 HL - 388-00 Linde E 50 / 600 L - 388-00 Linde E 50 HL - 1254-01 Linde E 50 HL - 388-00 Linde E 50 L - 388-00 Linde E100 / 1200 - 1471-00 Linde K - 5231-00 Linde K - 5231-00 - side battery change Linde P 250 - 127-00 Linde P 250 - 127-00 - vertical battery change Linde P 250 L - 127-05 Linde P 250 LWB - 5007-10 - side battery change Linde P 250 LWB - 5007-10 - vertical battery change Linde P 350 - 5007-10 - side battery change Still MX-X Still R 60-40 Still R 60-45 Still RX 60-40 Still RX 60-50 Jungheinrich EFG Jungheinrich EFG 540 Jungheinrich EFG 550 Jungheinrich EFG VAC 35 Jungheinrich EKX 515 Jungheinrich EKX 516 Toyota 7FBMF45 Crown TSP 6000-D Crown TSP 7000 Mitsubishi FB45-2 OM-Pimespo-Fiat XE 50 Steinbock-Boss WA 15 Other common battery sizes available on request. Transport available.

Condition: used, Year of construction: 2021, operating hours: 5,048 h, functionality: fully functional, machine/vehicle number: 245467, ENGEL DUO 17060/2000 injection moulding machine with ENGEL Viper 60 robot (robot working area, conveyor belt) – year 2021 For sale: ENGEL DUO 17060/2000 injection moulding machine, year of manufacture 2021, in excellent technical condition. The machine has been regularly serviced and operated in stable production conditions. Technical data and information: - Manufacturer: ENGEL - Model: DUO 17060/2000 - Clamping force: 2000T - Year of manufacture: 2021 - Operating hours: 5048 h - Type: two-platen injection moulding machine - Condition: very good, fully functional Additional equipment: - ENGEL Viper 60 robot – perfectly matched to the machine, ready for direct integration into a production line, robot working area, conveyor belt. Dcedpfsycc N Sex Aqcsh Offer advantages: - Low number of operating hours - Modern, energy-efficient design - High process repeatability and precision - Complete package: injection moulding machine + robot, robot working area, conveyor belt Ready for immediate commissioning

Condition: like new (used), Year of construction: 2019, operating hours: 11,337 h, functionality: fully functional, machine/vehicle number: 234917, clamping force: 1,600 kN, screw diameter: 30 mm, Equipment: documentation/manual, ENGEL eMotion 160 injection molding machine, originating from a cleanroom production facility, with only 11,300 operating hours and in like-new condition. Please find attached: • Current images of the machine • The order confirmation from ENGEL to NYPRO The original new price was approximately €330,000. The selling price is €79,500, including the crane. I can provide you with the technical specifications upon request; they are also included in the documents below. Included in the price: Dismantling the crane and placing it on two Europallets, as well as removing the machine from the cleanroom and loading it onto your truck with a 15-ton forklift. Dcjdowb Dl Tjpfx Aqcsh If you are interested or have any questions, please do not hesitate to contact me. The machine is located near Karlsruhe and can be viewed there at your convenience. Delivery is possible within a few days. Please feel free to submit a purchase price offer!

Condition: used, Year of construction: 2021, operating hours: 14,650 h, clamping force: 1,100 kN, displacement volume: 350 cm³, injection pressure: 1,455 bar, overall weight: 60,000 kg, screw conveyor diameter: 50 mm, terms of delivery: EXW (ex Works) Dedpfx Aqoy R Eq Ajcsch delivery time: on request terms of payment: 100% prior to delivery

Condition: ready for operation (used), Fanuc A06B-6150-H075 amplifier B-65282 SN: V11105021, professionally fully overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos. Dcedpfx Aqjy Np Szscjh

Condition: excellent (used), Year of construction: 2016, Engel e-Motion 740/280 T WP with TecnoMatic Robot / All-Electric Machine / Operating hours: approx. in automatic mode Year of manufacture: 2016 Injection unit: Screw diameter: 50 mm Shot weight: approx. 360 g Injection pressure: 1900 bar Plasticizing volume: 393 ccm Clamping unit: Clamping force: 280 t Tie bar spacing: 780x780 mm Platen size: 1100x1100 mm Ejector: electric Clamping system: toggle lever Control: CC 300 touchscreen Additional equipment: Production line with TecnoMatic robot Machine in very good technical condition All-electric machine: energy-saving and very quiet Operating hours: approx. in automatic mode Euromap 67 Robot interface 5x air valve 4x hydraulic core pull Control with 64 hot runner zones Injection unit is wear- and corrosion-resistant Main drive - servomotor with inverter for energy savings Central lubrication Parallel movements Automatic mold height adjustment TecnoMatic Medium Robot Year of manufacture: 2020 6-axis robot: all axes (X, telescopic Y, Z, A, B, C) driven electrically by servomotors Touch control panel Robot safety package Robot equipped with adapter, conveyor belt, and protective casing Purchase of robot and conveyor belt at additional cost Dimensions: Weight: 17,200 kg Dcsdpfsy Sl I Rjx Aqcsh LxWxH: 7.37x2.10x2.30 m All machines offered are powered up and tested by our service technicians prior to sale. A video of the technical tests of the selected machine can be provided, or you can participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2001, Engel ES 1350/275 HL with Engel ERC 53/1-E Robot / Machine in very good technical condition Year of manufacture: 2001 Injection Unit: Screw diameter: 60 mm Shot weight: 547 g Dcsdpfx Ajy Sl I Deqcoh Injection pressure: 1,834 bar Dosage volume: 618 ccm Clamping Unit: Clamping force: 275 t Tie bar distance: 0x0 mm Platen size: 1050x900 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 100 Additional equipment: Machine in very good technical condition Operating hours: 35,819 h in automatic mode Tie-bar-less machine Hydraulic core pull x 3 Controller with 16 hot runner zones Injection unit hardened – bimetallic Machine regularly serviced by authorized Engel service Dimensions: Weight: 20,000 kg Length/Width/Height: 7.10x2.15x2.30 m All machines offered are started by our service technicians before sale. A video of the technical tests for the selected machine can be provided or you can participate in live technical tests at our premises in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2009, Engel e-max 440/180 / All-electric injection moulding machine Year of manufacture: 2009 Injection unit: Screw diameter: 40 mm Shot weight: approx. 199 g Injection pressure: 1950 bar Shot volume: 220 cm³ Clamping unit: Clamping force: 180 t Tie bar distance: 520 x 520 mm Platen size: 760 x 775 mm Ejector: electric Clamping system: toggle lever Control system: CC 200 - touchscreen Additional equipment: Machine in very good technical condition, operated in a clean production environment All-electric machine: high-speed, energy-saving, and very quiet Euromap 67 interface Dcedpfey Sl Htex Aqcjh Robot interface 3 x air valves Hardened injection unit - bimetallic Parallel movements Central lubrication Automatic mould height adjustment Kistler sensor - mould pressure control Original mould crane Dimensions: Weight: 7,200 kg Length/Width/Height: 5.87 x 1.42 x 2.00 m All machines offered are started and tested by our service technicians prior to sale. It is possible to receive a video of the technical tests carried out on the selected machine, or to participate in live technical demonstrations at our company in Łódź. Price: On request