Used Esab Cnc Portal Flame-Cutting Machine for sale (69,192)

Condition: used, Year of construction: 2002, functionality: fully functional, Machine Data • Gantry-type machine with fixed table and moving portal for minimal footprint • Base frame, bridge, and bridge uprights made from welded, stress-relieved, and machined steel in one piece • Main machine assemblies consist of ribbed welded constructions engineered for optimal stiffness-to-weight ratio, vibration damping, and high acceleration • Each machine design is verified and optimized using finite element analysis (FEA) to ensure maximum quality, performance, and safety • Easily accessible machine table for straightforward loading and unloading via forklift or overhead crane • Ground precision linear guides with high pre-load and additional cover tape for optimal chip removal on all axes • Brushless digital A/C servo motors and controllers on all axes • Dual-side synchronised drive on the X-axis (gantry drive) • Rack-and-pinion drive on the X and Y axes • Precision ball screw drives with dual-end bearing units on the Z axis • Precision planetary gearboxes with low backlash • Enclosed cable drag chains protect the drag chain cabling against chips and dust • High-quality shielded drag chain cables offer maximum protection against interference and failures • X-axis travel: 3,120 mm • Y-axis travel: 2,190 mm • Z-axis clearance: 200 mm • Z-axis stroke: 280 mm • Network connectivity via Ethernet • Remote service via Internet Panel-Based CNC Control System • Touchscreen display • Multifunction keyboard with integrated touchpad • Integrated industrial PC with Windows 7 Professional, hard drive, and Ethernet • Comprehensive remote maintenance functionalities • Includes hand-held unit with electronic handwheel • MCP with rotary switch for feed and spindle override • Mobile control cabinet Hand-held Operating Device • Fast, increment-precise positioning • Handwheel with magnetic detent • Coarse, medium, and fine positioning • 2-channel emergency stop • Protection class IP65 Milling Spindle • Max. spindle power: 4 kW • Max. speed: 30,000 rpm • ISO-25 tool taper • Max. tool diameter (shank): 12 mm • Air-cooled • Pneumatic tool taper clamping • Dry, clean, oil-free compressed air required on customer side (< 0.1 μm, < 7 bar) Automatic Tool Changer / Linear • Linear tool magazine mounted outside the working area • Basic configuration: 4 slots • Up to 20 slots ISO-25 Extraction Unit for Automatic Tool Change • Hose connection diameter: 110 mm • Automatic up/down function for tool change Tool Length Sensor • Automatic tool length measurement via M command • Hard metal contact plate Lrjdpfex E Tmbsx Agrst • Measuring accuracy: 0.001 mm • Contact force: 1.5 N Tool Length Sensor • Automatic tool length measurement via M command • Hard metal contact plate • Sensor mounted outside the working area 2x Side Channel Blowers • Max. power consumption: 7.5 kW • Maximum airflow: 650 m³/h • Rated voltage: 400 V • Rated current: 14 A • Pressure: 39,500 Pa

Condition: good (used), functionality: fully functional, Year of construction: 2018, control type: CNC control, laser power: 8,000 W, CNC laser cutting system TruLaser 5030 Fiber (L68) 8000 Watt with LiftMaster X working area max.: 3000 mm Y working area max.: 1500 mm Z working area max.: 115 mm Control system: Siemens Sinumerik 840D SL Laser power: 8000 Watt Standard equipment: Machine - Enclosed machine frame - Power supply for TruDisk integrated into the machine - Torque drive in combination with linear direct drives - Enclosed beam guidance via laser light cable (LLC) - Machine cooling unit (water-air) - Integrated control cabinets - Integrated cabinet - Automatic pallet changer in longitudinal direction - Longitudinal conveyor - Work area lighting - Positioning laser diode - Spray device - PierceLine - FocusLine - NitroLine - PlasmaLine - Automatic nozzle cleaning TRUMPF laser - Solid-state laser TruDisk 4001 with one LLC outlet Lrjdpfozv Trvjx Agrst - LLC according to standard layout (cable directly next to the machine) - Laser cooling unit (water-air) - Excitation via pump diodes - Laser power control The TruDisk laser is subject to international export control. According to EC Dual-Use Regulation 428/2009 (laser covered under 6A005). Cutting head - Universal cutting unit with fully adaptive lens system - Single cutting head strategy - Protective glass against lens contamination - Online condition monitoring of the protective glass - ControlLine: Height control and sheet edge detection Control system - SINUMERIK 840D SL control system - Simple workshop programming - Fast reproduction - Integrated technology data - Automatic shutdown - Programmable cutting gas/pressure selection - FastLine - FlyLine - Microweld - AdjustLine - Multi-sheet processing - Condition Guide - Extended machine sensor system for Condition Guide - 19" touch color screen Data transfer - USB interface - RJ-45 network connection - Central Link - Wireless Operation Point (basis for Visual Online Support) Safety - CE marking - Light curtains - Multi-chamber extraction system - Compact dust extraction system - Machine cladding, certified viewing window, door on the right - Electric roll-up roof + Solid-state laser TruDisk 8001 with 1 LLC outlet - BrightLine fiber - High-speed cutting package - Smart Beam Control (intelligent beam monitoring) - Performance package for fusion cutting + Smart Nozzle Automation - Nozzle changer - Automatic nozzle inspection + High-speed cutting package Eco + Integrated camera 1 for process monitoring (view of the first 2.5m) + CoolLine + Copper cutting package (includes cutting data) + Brass cutting package (includes cutting data) Automation + Basic LiftMaster unit - incl. stainless steel grid (tine spacing 67mm, interchangeable tines), suction frame, stripping device, double sheet detection, symmetrical arrangement) + Loading station - for stack height up to 200mm + Separation of thin sheet metal - Available for sheet thicknesses s = 0.8-2.0mm + Unloading platform + Loading platform + Right-hand arrangement

Condition: used, Year of construction: 2018, workpiece weight (max.): 35,000 kg, total length: 15,600 mm, total height: 6,000 mm, total width: 6,000 mm, overall weight: 155,000 kg, The Pittler WMZ PV4000 / 1-2 is a heavy CNC vertical turning machine with a portal design, featuring one workpiece spindle and two independently movable tool carriers. The machine enables turning, drilling, milling, and grooving. The right tool carrier is designed as a swiveling multifunction head with a B-axis and driven tools. Two separate chain magazines provide a total of 94 tool positions. Technical Data Machine Number: ZV029 Machine Concept: Portal machine with one workpiece spindle and two tool carriers Machining Processes: Turning, drilling, milling, and grooving Maximum Swing Diameter: 3800 mm Maximum Workpiece Diameter: 3800 mm Maximum Workpiece Speed: 100 min-1 Rated Speed: 36.7 min-1 Workpiece Clamping: Manual Chuck: Röhm Tool Holder: Capto C8 Tool Magazines: 2 chain magazines Tool Positions: 2 x 47 Total Number of Tool Positions: 94 Maximum Tool Diameter: 120 mm according to the operating manual Maximum Tool Diameter: 150 mm according to the order confirmation with appropriate magazine loading Maximum Tool Length: 400 mm Maximum Tool Weight: 20 kg Travel Paths X1-Axis Right Tool Carrier: 3200 mm X2-Axis Left Tool Carrier: 2800 mm Z1-Axis Right Tool Carrier: 1000 mm Z2-Axis Left Tool Carrier: 1000 mm Rapid Traverse X-Axes: up to 32 m/min Rapid Traverse Z-Axes: up to 20 m/min Workpiece Spindle Gear Reduction: 1 to 30 Maximum Speed: 100 min-1 Rated Speed: 36.7 min-1 Rated Power: 67.4 kW Short-Term Total Power: 202.2 kW Rated Torque: 52.65 kNm Maximum Drive Torque: 71.55 kNm Torque according to Order Confirmation: 67000 Nm at 40% duty cycle Motor Spindle Power according to Order Confirmation: 200 kW at 100% duty cycle Maximum Spindle Load Capacity including Chuck, Clamping Jaws, and Workpiece: 35000 kg Spindle Flange Diameter: 1900 mm Thrust Bearing Diameter: 1400 mm The workpiece spindle is designed as a water-cooled motor spindle with precision axial deep groove ball bearings. Tool Carrier and Multifunction Head The right tool carrier features a swiveling multifunction head with two Capto C8 holders for turning tools as well as drilling and milling tools. B-Axis for Stepless Positioning Swivel Range: 180 degrees Speed of Driven Tools: up to 6000 min-1 Tool Spindle Torque: approx. 120 Nm at 100% duty cycle Hydraulic Clamping Direct Measurement System Direct Coolant Supply High-Pressure Coolant Supply: up to 70 bar Tool Magazines Two chain magazines with 47 tool positions each Tool Holder: Capto C8 Maximum Tool Diameter: 120 mm Up to 150 mm with appropriate magazine loading Maximum Tool Length: 400 mm Maximum Tool Weight: 20 kg Tool Cleaning with Blowing Air Manual Magazine Loading Coolant and Chip Disposal Two Knoll Chip Conveyors Type 600 S-2/120 Knoll Band Filter Type KF400-2300 Additional Equipment Röhm Chuck Spindle Cooling Hydac FLKS-4S Hydraulic Unit Hydac TBM20 Electrical Data Operating Voltage: 3 x 400 VAC Protection Class: IP55 Maximum Power Consumption: 280 kVA Component weight max.: 35,000 kg Swing: 3,800 mm Lrsdpfx Agozwa Rberot Rotation height max.: 2,100 mm Weight approx.: 155,000 kg Dimensions (LxWxH) approx.: 15600 x 6000 x 6000 mm Table diameter: 3,800 mm Control: Siemens SINUMERIK 840D sl Year of construction: 2,018 Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: Yes

Condition: used, functionality: unexamined, type of input current: three-phase, total height: 3,000 mm, total length: 3,000 mm, input voltage: 380 V, type of cooling: water, welding current at 60% duty cycle: 1,000 A, welding current at 100% duty cycle: 800 A, welding current (min.): 250 A, welding current (max.): 1,250 A, Used ESAB submerged arc welding (SAW) system for sale, manufactured by ESAB AB / ESAB Welding Equipment AB, Sweden. The system is designed for mechanized submerged arc welding (SAW), including tandem welding AC/DC. It is suitable for welding long, straight seams, beams, profiles, sheet metal structures, cylindrical products, vessels, tanks, and heavy welded structures. Manufacturer: ESAB AB / ESAB Welding Equipment AB Country: Sweden Process: SAW – Submerged Arc Welding Type: Mechanized welding system / tandem welding system Inscription: UP Tandemschweißen Welding: DC + AC with ESAB power sources Welding head: Available, with flux hopper Work beam / chassis: Long ESAB welding beam / tractor Condition: Dismantled / stored, available for inspection Welding power sources ESAB TAE 800 Parameter Data Model ESAB TAE 800 Range 300 A / 28 V – 800 A / 44 V 100% duty cycle 800 A / 44 V 60% duty cycle 1000 A / 44 V Lrsdpfx Agjzimbkeret Power supply 400 / 415 / 460 / 500 V, 50 Hz Protection IP23 ESAB LAE 1250 Parameter Data Model ESAB LAE 1250 Type Welding rectifier Range 250 A / 24 V – 1250 A / 44 V 100% duty cycle 1250 A / 44 V Power supply 220 / 380 / 415 / 500 V, 50 Hz Protection IP22 Weight 490 kg Data from the tandem welding plate Mode Current Voltage Direct current / DC 520 – 580 A 28 – 30 V Alternating current / AC 550 – 620 A 34 – 36 V Travel speed: 680 – 800 mm/min. Included components: long ESAB welding beam / chassis; welding head; flux hopper; cables and hoses; control boxes; ESAB TAE 800; ESAB LAE 1250; submerged arc welding equipment. Condition: The system is used and is currently dismantled / stored out of active operation. Visible signs of use, dust, dirt, and storage are present. It is sold in its current condition, with the equipment shown in the pictures. On-site inspection and technical verification by the buyer are recommended before purchase.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 60 kW (81.58 HP), number of axes: 2, overall weight: 68 kg, table length: 500 mm, table width: 300 mm, Equipment: CE marking, documentation/manual, Laser engraving machine for home and hobby. This table-top equipment can also cut wood, paper, cardboard, acrylic, and fabric. A Wattsan СО2 laser engraver is first and foremost designed for carving tiny workpieces. Compact, dependable, and precise — just what you need. Wattsan 0503 micro engraver operates plywood, wood, plastics, rubber, leather, fabric, and much more. It can cut materials up to 5-6 mm. It is commonly used in the creation of souvenirs, stamps, and other decorations. You can give our managers a call for additional details! Wattsan 0503 characteristics Working area: 500x300 mm Laser power: 60 W Working table lowering depth: 200 mm Positioning precision: 0,03 mm Machine size: 650 x 1040 x 575 mm Lodpfeh D Rvpjx Agrort Packing size: 765 x 1140 x 710 mm Weight: 104 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our website you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: EDGE PLUS 1500 x 3000mm / 1500 x 4000mm, control type: CNC control, laser type: fiber laser, laser source manufacturer: RAYCUS - MAXPHOTONICS - IPG, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, emergency stop, safety light barrier, * Raycus, MaxPhotonics, and IPG resonators. * Raytools, Precitec, and Bochu laser cutting heads. * LYNCA/CYBELEC, Eurosoft, ESA CNC systems. * 21.5'' touchscreen for high ease of use. * Dual table cutting system with side loading and motorized table exchange. * Occupies 40% less floor space compared to a standard fiber laser cutting machine. * Easy and cost-effective transportation. * CE compliant. * Compact design with a transverse, removable cutting table. * Can be equipped with fiber laser sources ranging from 2kW to 12kW. * Working range: 1,500mm x 3,000mm and 1,500mm x 4,000mm. Lrjdjyy Iyrjpfx Agrjt * User-friendly and provides easy access to the cutting area. * Rigid, monoblock, welded steel body and robust machine structure, thermally stress-relieved. * Aluminum gantry design for increased rigidity and high dynamic performance. * Energy-saving with low power consumption. * Remote service capability. * Automatic lubrication system. * Customized production available according to specific client requirements, as both design and manufacturing are carried out in-house.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 90 kW (122.37 HP), number of axes: 2, overall weight: 110 kg, table length: 600 mm, table width: 400 mm, Equipment: CE marking, documentation/manual, Laser engraving machine for home use and hobby. This table-top equipment can also cut wood, paper, cardboard, acrylic, and fabric. A Wattsan СO2 laser engraver is primarily intended for cutting small workpieces. Compact, trustworthy, and precise — exactly what you need. Wattsan 6040 engraver operates plywood, wood, plastics, rubber, leather, fabric, and much more. It can cut materials up to 7-8 mm. It’s often used for souvenirs production, stamps, little decorations, etc. You can give our managers a call for additional details! Wattsan 6040 characteristics Working area: 600x400 mm Laser power: 90-100 W Working table lowering depth: 200 mm Positioning precision: 0,03 mm Machine size: 765 x 1165 x 600 mm Packing size: 860 x 1250 x 790 mm Weight: 121 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Lodpfxeh Uc Ere Agrjrt Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: used, Year of construction: 2019, functionality: fully functional, table length: 8,000 mm, table width: 2,540 mm, overall weight: 8,000 kg, sheet thickness steel (max.): 100 mm, cutting length (max.): 8,000 mm, cutting width (max.): 2,540 mm, drill diameter: 40 mm, FICEP TIPO G25LG - CNC PLATE PROCESSING LINE (DRILLING, MILLING, THERMAL CUTTING) | YEAR 2019 Ledpfx Agsu Dw I Eorjrt The Ficep Tipo G25LG is a CNC plate processing line for combined drilling, milling, tapping and thermal cutting of steel plates in structural steel fabrication. Built in 2019 - a young machine in its class on the used market. All processes run in a single pass on a rigid double-bridge gantry frame. CONDITION & REFURBISHMENT Refurbished and inspected by a certified technician, ready for operation. - The exact scope of reconditioning varies from machine to machine and is disclosed individually upon serious interest. - Viewing possible by arrangement (machine reconditioned - no demonstration under power). FUNCTION & APPLICATION The vertical mono drilling unit with automatic tool changer (ISO 40) performs drilling, milling, tapping, centre-punching and countersinking. The Hypertherm XPR300 plasma torch and the integrated oxy-fuel cutting unit handle thermal cutting - from thin sheet to heavy plate. The line is operated via the Ficep Pegaso CNC control. Infeed and outfeed roller conveyors with material transfer (8 m each) ensure continuous material flow. Typical applications: structural steel fabrication, steel trading and plant engineering. TECHNICAL DATA - Manufacturer: Ficep | Model: Tipo G25LG | Year: 2019 | Serial number: 36098 - Machine type: CNC plate processing line (drilling / milling / thermal cutting) - Condition: used, refurbished by certified technician - Frame design: double-bridge gantry frame, welded | Machine weight: 8,000 kg - Plate width: max. approx. 2,540 mm, min. 200 mm - Plate thickness: max. 45 mm (plasma cutting), max. 100 mm (drilling) - Drilling heads: 1 (vertical mono drilling unit) | Tool holder: ISO 40 - Max. drilling diameter: 40 mm | Max. drilling/milling depth: 100 mm - Max. spindle speed: 7,000 rpm | Spindle power: 15 kW - Plasma cutting torch (straight): 1 | Plasma source: Hypertherm XPR300 | 300 A - Oxy-fuel cutting unit: included - CNC control: Ficep Pegaso CNC - Processes: drilling, milling (incl. straight/curved slots, Y/J weld-edge preparation), tapping, centre-punching, countersinking, marking, scribing, straight plasma cutting, oxy-fuel cutting On request (to be confirmed bindingly during inspection): processing length, tool magazine stations, min. plate thickness for drilling, min. drilling diameter, pass line height, longitudinal and cross positioning speeds, connected load and machine dimensions. SCOPE OF DELIVERY - 1 x Ficep Tipo G25LG CNC drilling, milling and thermal cutting line (year 2019) - 1 x Ficep Pegaso CNC control - 1 x Vertical mono drilling unit with automatic tool changer (ISO 40) - 1 x Plasma cutting torch (straight) | 1 x Hypertherm XPR300 plasma source (300 A) - 1 x Oxy-fuel cutting unit - 1 x Infeed roller conveyor with material transfer (8 m) | 1 x Outfeed roller conveyor (8 m) - 1 x Extraction system for plasma cutting LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border. Dismantling, transport, installation and commissioning by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM): specialist for refurbished Ficep structural-steel machinery. Further machines on request. CONTACT / INQUIRY Viewing by arrangement | Price on request. Sale exclusively to commercial customers (B2B).

Condition: good (used), functionality: unexamined, Year of construction: 2019, operating hours: 28,160 h, machine/vehicle number: Z3.03.04.02, control type: CNC control, controller manufacturer: PRIMA Power, laser type: fiber laser, laser source manufacturer: IPG-Faserlaser, laser power: 6 W, table length: 4,100 mm, power: 6 kW (8.16 HP), Equipment: nozzle changer, Description: The Laser Genius LGf 2040 from PRIMA Power is a highly dynamic fiber laser cutting system, ideal for demanding metal processing and series production. Main Features: 6 kW IPG fiber laser for lowest operating costs and maximum uptime Working area 4,100 × 2,100 × 150 mm – precision cutting of steel, stainless steel, and aluminum up to 25 mm material thickness Positioning accuracy ± 0.03 mm and traverse speeds up to 240 m/min Automation: Compact Tower 10-pallet changover system for uninterrupted material flow ATC nozzle changer and integrated extraction/filter system Control: Intuitive Prima Power CNC touch panel Condition & Documentation: Good used condition, regularly maintained, documentation available. Professional dismantling by PRIMA Power in June 2025 Current location: 41849 Wassenberg (ready for collection) Price & Financing: Asking price net €390,000 ex works On request, we are happy to provide you with tailored leasing or financing offers. Pictures of the machine in dismantled condition can be found at the end of the listing. Lsdswv U N Sjpfx Agrert Note: Sale takes place without guarantee/warranty; inspection possible by appointment.

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine Specification • Work table 1800 x 600 mm with 4 T-slots • Traversing arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots, 18 mm, rear side of machine base • 2 T-slots, 18 mm, left side of machine base • Thread cutting unit • Central lubrication • Coolant system • Machine light • CE marking • Safety device • USB interface Dimensions and Travel Ranges Tool holder: SK 40 Column diameter: 195 mm Table dimensions: 1800 x 600 mm Number of T-slots: 4 Distance between T-slots: 125 mm Quill travel (Z-axis): 200 mm Column travel (W-axis): 410 mm Distance spindle nose – table (min): 70 mm Distance spindle nose – table (max): 680 mm Distance spindle nose – floor (min): 970 mm Distance spindle nose – floor (max): 1580 mm Drilling radius: 540 – 1590 mm Working table height: 900 mm Machining Capacities Drilling capacity (solid): St 60: ⌀ 40 mm GG 22: ⌀ 50 mm Tapping: St 60: M36 GG 22: M42 Main Spindle Drive AC motor, frequency controlled: 5.5 kW at 100% duty cycle Speed range: 15 – 2800 rpm Torque: max. 250 Nm Constant torque from 15 – 2000 rpm Feed Drives X-axis - AC servo motor: 0.25 kW Y-axis - AC servo motor: 0.25 kW Z-axis - AC servo motor: 4.50 kW W-axis - AC servo motor: 2.50 kW Rapid traverse (X/Y/Z): 7.5 / 7.5 / 5 m/min Rapid traverse (W): 3 m/min Infinitely variable feeds: 5 – 2000 mm/min Accuracy Positioning accuracy X, Y axis (over 1200 mm): ± 0.075 mm Electrical Data Operating voltage/frequency: 400 V / 50 Hz Control voltage: 24 V Hydraulic unit for clamping: 0.75 kW Total connected load: 13.0 kVA Weight (Danumeric 440, without packaging, with 1800 x 600 mm table): 2800 kg CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Display: TFT flat screen, backlit, easily readable from all sides, 215 x 160 mm Position indication: Cartesian or polar, absolute or incremental Measurement units: mm or inch or degrees Interpolation: 2 axes (X, Y) Ledpfx Aszrr Uuegrert Technology Database: Tool management, tool suggestions based on machining operation, material-dependent cutting data suggestions Tool management: max. 500 tools Subprogram function: yes Machining Cycles Standard software options: Conversational programming, 38 reference point shifts, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable entry functions Zero point determination: cycles for determining reference points by manual probing of the workpiece for: - Arbitrary clamped rectangular parts - Arbitrary clamped round parts - Centering of cast and flame-cut parts - Angle position detection for round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns

Condition: good (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 5911143, Equipment: safety light barrier, For sale is an absolutely reliable and immediately operational Polar Mohr 92 EM-Monitor high-speed cutter from 1989 (serial number: 5911143). The machine is in very good, well-maintained condition and has been operating flawlessly until recently. Technical data & highlights: Model: Polar 92 EM-Monitor with digital program display Cutting width: 920 mm Application: Ideal for professional printing companies, digital printing, and post-processing (B2 format) Condition & scope of delivery: Ledpfxez Ahrqs Agrjrt Safety: The optical light barrier (light curtain) functions perfectly and meets UVV safety requirements. Table: Chrome-plated air table in flawless condition (blower operates powerfully). Blade: 1 machine blade mounted + 1 additional spare blade (newly sharpened) included in the delivery. Accessories: Complete with original blade changing tool, tool set, and complete documentation / operating manual.

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 665001, travel distance X-axis: 700 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 450 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, workpiece weight (max.): 2,000 kg, total height: 2,300 mm, total length: 3,300 mm, total width: 2,300 mm, table width: 700 mm, table length: 850 mm, table load: 2,000 kg, overall weight: 7,700 kg, spindle speed (min.): 3,000 rpm, spindle speed (max.): 40,000 rpm, number of slots in tool magazine: 40, Equipment: documentation/manual, OPS INGERSOLL OPS 650 CNC machining center - Table T-slot quantity: 5 - T-slot dimensions: 18H12 - Distance HSK tool holder - table: 550 mm - Main spindle tool holder: HSK-E 40 - Positioning accuracy TP according to DIN ISO 230-2: 0.005 mm - Repeatability: 0.002 mm - For further technical data, see the photographed data sheet - Including technical documentation - Including workbench and accessories such as HSK-E 40 tool holders, equipped with tools Lrsdpfx Aoy Tu Ddjgrst - Workbench dimensions: approx. 1500 x 900 x 1100 mm Attention: The item must be collected between July 21 and July 23, 2026, on a date to be determined. FCA D-73529 Schwäbisch Gmünd - loaded onto a truck.

Condition: as good as new (ex-display), Year of construction: 1999, functionality: fully functional, WE OFFER MIKRON CNC Ljdevnz Exspfx Agrjrt AN VERY EXCELLENT OPORTUNETEY TO BUY AN NEW CONDITION MACHINE MACHINE IS BRAND NEW CONDITION- NEWER USED FOR ANY WORK.

Condition: like new (used), Year of construction: 2018, operating hours: 700 h, functionality: fully functional, type of input current: AC, sheet thickness (max.): 60 mm, sheet thickness steel (max.): 60 mm, overall weight: 5,000 kg, workpiece weight (max.): 4,000 kg, cutting current: 200 A, KOIKE Gammatec 2040 – CNC Plasma Cutting Machine for Sale 📌 Manufacturer / Model: KOIKE Gammatec 2040 📆 Year of manufacture: 2019 📍 Location: Finland 💪 Powerful and precise CNC plasma cutting solution The KOIKE Gammatec 2040 is a heavy-duty industrial CNC plasma cutting machine, designed for high accuracy and reliable production. It is an excellent choice for metal workshops, fabrication companies, and industrial manufacturing environments. 📊 Technical specifications 📏 Cutting area (X × Y): 4,000 × 2,000 mm 🔪 Maximum cutting thickness: up to 60 mm 🌀 Number of torches: 1 🧠 Control system: CNC ⚡ Plasma system: Kjellberg HiFocus 🔌 Power requirement: approx. 2 kVA 📦 Machine dimensions: approx. 5,000 × 2,400 × 1,000 mm ⚖️ Machine weight: approx. 4,000 kg 📈 Key advantages ✅ Large cutting table (4 m × 2 m) – ideal for large metal sheets ✅ CNC-controlled precision for industrial production ✅ Proven KOIKE quality and robust machine design ✅ Suitable for continuous workshop or factory use 🛠 Condition 🔹 Used – very good condition The machine can be inspected and tested prior to purchase. Power source: Smart Focus 200 Mains voltage: 3 × 400 V, 60 Hz Lrjdpfx Aeygk Sijgret Cutting current: 35 – 200 A Marking current: 10 – 50 A Cutting range: Maximum: 60 mm Recommended: 1 – 10 mm Piercing: Maximum: 32 mm Plasma gases: O₂, Ar / H₂, N₂, Air Piercing gases: Ar, N₂ Dimensions (L × W × H): 1030 × 680 × 1450 mm Mass: 388 kg Plasma machine torch: PerCut 4000 Quick change head: PerCut 4000

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: MASTER PLUS (Müşteriye Özel Ölçüler), control type: CNC control, laser type: fiber laser, type of cooling: water, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, emergency stop, safety light barrier, * MASTER PLUS is a high-capacity, technologically advanced fiber laser cutting machine primarily used for cutting large metal sheets. It is capable of processing long, wide, and various materials in a single operation. For materials of variable sizes, it allows for flexible operation by creating continuous, uninterrupted, and independent cutting zones at different points of the machine. Enables higher production speeds and increased efficiency when processing large-volume materials, leading to significant savings in time and labor. * Single table, fixed cutting bed. * Customizable, available with a wide range of cutting areas. * Equipped with Raycus, MaxPhotonics, and IPG resonators. * Features Raytools, Precitec, and Bochu laser cutting heads. * LYNCA/CYBELEC, Eurosoft, ESA CNC systems. * 21.5'' touch screen for easy operation. * CE-compliant. * Configurable with fiber laser sources from 2kW up to 30kW. * Bevel cutting option available. * User-friendly design, easy access to the cutting area. * Thermally processed, robust monoblock welded steel frame for enhanced structural integrity. * Aluminum bridge design provides higher resistance and dynamic performance. * Energy saving through low power consumption. Lredjyy Nrvspfx Agret * Remote service capability. * Automatic lubrication system. * Since both design and manufacturing are done in-house, custom production is available according to customer requirements.

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: EDGE 1500 X 3000 / 1500 X 4000, control type: CNC control, laser type: fiber laser, laser source manufacturer: RAYCUS - MAXPHOTONICS - IPG, type of cooling: water, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, emergency stop, * Raycus, MaxPhotonics and IPG resonators. * Raytools, Precitec, and Bochu laser cutting heads. * LYNCA/CYBELEC, Eurosoft, ESA CNC. * High user convenience with a 21.5'' touchscreen display. * Occupies 40% less floor space compared to a conventional fiber laser cutting machine. * Easy and cost-effective transportation. * CE conformity. * Features a compact design and a transverse removable cutting table. * Can be equipped with fiber laser sources ranging from 2kW to 6kW. * Working range: 1,500mm x 3,000mm and 1,500mm x 4,000mm. * User-friendly, with easy access to the cutting area. * Thermally treated, robust, monoblock welded steel frame for enhanced rigidity. * Aluminum bridge design provides increased strength and high dynamic performance. * Energy saving through low power consumption. Lredpfxjyyxpqs Agrjt * Remote service capability. * Automatic lubrication system. * Production according to customers’ special requirements, as both design and manufacturing are carried out in-house.

Condition: used, Year of construction: 2022, operating hours: 4,500 h, functionality: fully functional, repeat accuracy: 0.2 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 250 mm, positioning accuracy: 0.2 mm, workpiece weight (max.): 1,000 kg, sheet thickness aluminum (max.): 120 mm, total length: 2,000 mm, total width: 3,000 mm, product height (max.): 120 mm, Equipment: safety light barrier, BIESSE INTERMAC PRIMUS 322 – CNC WATERJET CUTTING MACHINE For sale is a Biesse Intermac Primus 322 CNC waterjet cutting machine, manufactured in 2022. The machine has only approximately 4,500 operating hours and is equipped with a BFT 37 kW high-pressure pump. The machine is fully functional, in very good and well-maintained condition, and is immediately available. Technical Data * Manufacturer: Biesse Intermac * Model: Primus 322 * Year of manufacture: 2022 * Operating hours: approx. 4,500 hours Ledsz Drcyepfx Agrjrt * Configuration: 3-axis * Working area: 3,210 × 2,000 mm * Z-axis travel: 250 mm * High-pressure pump: BFT * Pump power: 37 kW * Maximum pressure: up to 4,200 bar * Max. X/Y speed: 45 m/min * Max. table load: 1,000 kg/m² * Condition: Very good / fully functional * Location: Croatia, EU * Availability: Immediately available Highlights * Year 2022 * Only approx. 4,500 operating hours * BFT 37 kW high-pressure pump * 3-axis configuration * Working area 3,210 × 2,000 mm * Very well maintained * Fully functional * Immediately available * Inspection and demonstration under power possible by appointment

Condition: good (used), Year of construction: 2008, Used 6000 x 2000 mm plasma cutting machine from HPM (Italy) Type: GV 60 20 Table dimensions: 6000 x 2000 mm Lredpfx Agezd Ur Terot Hypertherm 130 XD with Truehole option New Hypertherm EdgeConnect CNC control + new servo motors Modesta extraction system Includes spare parts Year of manufacture: 2008 CNC control renewed in: 2018

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 269588 € 3 kW Wechseltisch 16 mm 8 mm 8 mm 5 mm 8 mm 29,9 (mit Absaugung) kW 6100 x 2070 mm 6100 mm 2070 mm 125 mm 6096 x 2032 mm 240 (für 3 - 12kW) / 400 kg/m² 5800 (für 3 - 12kW) / 960 kg 100 m/min 100 m/min 141 m/min 14 m/s² +/- 0,05 mm +/- 0,05 mm 42 s The HD-FN has two tables which are automatically switched alternately to enable simultaneous cutting and loading/unloading. The shuttle table is positioned longitudinally, which results in the best possible accessibility for optional loading and unloading systems. Control, laser source and cooling are integrated into the machine. The cutting head has automatic focus adjustment. The system consists of the following components: Shuttle table (positioned longitudinally for best possible accessibility for optional loading and unloading systems) Encapsulated cutting room with protective glazing CNC graphic control with touchscreen Laser source Brilase Premium Cutting head with automatic focus adjustment Integrated cooling unit for cutting head and laser source CAD/CAM software Lantek for programming including autonesting Positioning laser Sheet check system (automatic detection of sheet position and dimensions) Automatic nozzle cleaning Central lubrication Slug box Working area lighting Multi-chamber suction system Light barrier protection for the changing table Remote maintenance access Air condition for electrical cabinet Equipped according to CE guidelines ALTERNATIVE LASER SOURCES: Material 4 kW 6 kW 12 kW 15 kW 20 kW Mild steelS235 20 25 30 Lsdpfxox U Elne Agrort 35 40 Stainless steel(304) 10 15 25 35 40 Aluminium (5083) 12 20 30 35 40 Copper 6 10 15 15 15 Brass(CuZn39 Pb3) 10 12 20 20 20 OPTIONS: Suction unit with filter Automatic nozzle change

Condition: good (used), functionality: fully functional, Year of construction: 2019, travel distance X-axis: 3,048 mm, travel distance Y-axis: 1,524 mm, travel distance Z-axis: 350 mm, total length: 9,450 mm, total width: 2,240 mm, total height: 2,520 mm, For sale is a used Bodor P3 fiber laser cutting machine, manufactured in 2019. The machine is in good used condition and is ideal for professional use in metal and sheet metal processing. Bodor P3 fiber laser cutting machine – manufactured in 2019 – used Bodor P3 3D? / fiber laser cutting system – manufactured in 2019 Technical data: * Model: Bodor P3 * Year of manufacture: 2019 * Working area: 3,048 × 1,524 mm * Max. travel speed: 200 m/min * Max. acceleration: 4.0 G * Z-axis travel: 350 mm * Positioning accuracy: ±0.05 mm/m * Accuracy of repositioning: ±0.02 mm * Dimensions: approx. 9,450 × 2,240 × 2,520 mm * Table loading station: 3–60 kW, depending on the model The Bodor P3 impresses with its high cutting speed, precise positioning and a generous working area. An interesting machine for sheet metal processing, metalworking, job production and industrial manufacturing. Used machine – inspection possible by appointment. Transport, dismantling and loading can be organized upon request. Dismantling, transport and loading can be organized throughout Europe for an additional charge, if desired. Prices plus VAT. Inspection possible by appointment. Contact us; our team will be happy to assist you. Trade-in or exchange possible! Machine purchase/sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Lrodpfx Aoz Egzgogrot Do you need a high-quality, but affordable, metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 100 kW (135.96 HP), number of axes: 2, overall weight: 345 kg, table length: 1,200 mm, table width: 900 mm, Equipment: CE marking, documentation/manual, 1290 is a professional laser cutter for serious manufacturing. It has a through table, allowing you to cut materials and rolls of fabric of any length. In addition, it has two laser heads, which transform this CNC laser machine into a super-efficient monster that works 24/7. Wattsan 1290 ST can cut up to 10–13 mm and engrave wood, cardboard, acrylic, glass, rubber, stone, wool, etc. Two laser heads function simultaneously at a minimum distance of 130 mm apart. This model also has a waste collection container that will make the work much more pleasing. You can give our managers a call for additional details! Wattsan 1290 Duos ST characteristics: Working area: 1200x900 mm Laser power: 100-130 W Working table lowering depth: 40 mm Positioning precision: 0,03 mm Machine size: 1410 x 1790 x 670 mm + if it is on wheels 315 mm Packing size: 1920 x 1630 x 820 mm Weight: 393 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Lrodpfxjh Ucruj Agrot Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: excellent (used), functionality: fully functional, New 6 kW resonator and new cutting head to be installed by the end of 2025 Investment approx. EUR 190,000 Immediately available – inspection possible Lsdpfxjz Dtygo Agrsrt Manufacturer: Bystronic Model: BySprint fiber 3015 Year of manufacture: 2022 / new resonator and cutting head in 2025 Sheet metal format: Maximum format, 4,000 x 2,000 mm Operating hours: After upgrade at the end of 2025: approx. 1,400 operating hours, approx. 550 cutting hours Before upgrade until 2025: approx. 17,700 operating hours, approx. 7,500 cutting hours SPECIAL EQUIPMENT: - Cut Control Fiber - Part and cross conveyors in the cutting area - Dust extraction system with 200-liter drum adapter - Upgrade in 2025: 6,000-watt fiber laser with a new cutting head Standard equipment: BySprint Fiber 4020 Pallet change system with 2 pallets Enclosed housing/roof Scrap bin with rollers CNC control and cabinet Touchscreen with user interface for ByVision Operation and comfort Maintenance Messenger Restart Manager System Manager Handheld operating device ByHand Cutting parameter assistant Uninterruptible power supply (UPS) Cutting bridge OPC interface Cutting Cutting head Piercing jet ByPos Fiber Detection Eye Nozzle cleaning Scanning Fiber laser sources Tank heater Tropicalization Interface to automation/handling Cooler Operator protection in the cutting area Operator protection in the loading/unloading area Voltage 400V / 50Hz Compressed air (machine incl. laser source and cooling unit) Material specification Part tolerances and cutting surface quality Cutting gas supply and cutter quality TECHNICAL DATA: Maximum positioning speed parallel to the axes X/Y: 100 m/min Maximum positioning speed simultaneous: 140 m/min Position deviation Pa (VDI/DGQ 3441): +/- 0.1 mm Position scatter Ps (VDI/DGQ 3441): +/- 0.05 mm Edge detection accuracy: +/- 0.5 mm Maximum workpiece weight: 1580 kg Table change time: 35 seconds Laser power: 6,000 Watts Maximum sheet thickness: Steel: 30 mm Stainless steel: 25 mm Aluminum: 20 mm Brass: 15 mm Copper: 15 mm Machine weight (without extraction, cooling unit): approx. 15,000 kg Machine dimensions, approx.: 13,743 mm length, 6,670 mm width, 2,565 mm height Transfer of programming software possible. This used machine can be inspected under production conditions. All information is subject to change without notice – sale excludes any guarantees and warranties. Subject to prior sale.

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 26,787 h, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: FANUC, laser type: CO₂ laser, laser source manufacturer: FANUC, laser power: 4,000 W, sheet thickness steel (max.): 10 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 8 mm, type of cooling: water, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, fume extraction, safety light barrier, Amada Alpha LC2415NT 4 kW laser cutting system with loading and unloading unit, as well as storage tower with 7 storage positions (LKI). Suitable for both single-part and high-volume production. Regularly serviced by technicians; condition according to operating hours is very good. The chiller unit is equipped with a connection for heat recovery. The system has been dismantled, stored in an external warehouse, and can be inspected at any time. Maximum sheet size: 3000x1500mm. Lodoyfl U Njpfx Agrjrt

Condition: like new (used), functionality: fully functional, Year of construction: 2025, operating hours: 30 h, control type: CNC control, actuation type: electric, laser type: fiber laser, laser source manufacturer: Raycus, laser source model: Raycus, laser hours: 30 h, laser power: 6,000 W, sheet thickness (max.): 15 mm, sheet thickness steel (max.): 15 mm, pipe diameter (max.): 220 mm, pipe length (max.): 6,000 mm, table length: 3,000 mm, table width: 1,500 mm, travel distance X-axis: 3,015 mm, travel distance Y-axis: 1,515 mm, travel distance Z-axis: 50 mm, type of cooling: water, Equipment: CE marking, centralized greasing system, cooling unit, 🇳🇱 Verkooptekst voor uw BEKE 6 kW Fiber Lasersnijmachine (3000 × 1500, Reci‑kop) Bent u op zoek naar een krachtige, nauwkeurige en betaalbare lasersnijmachine voor metaalbewerking? Deze BEKE 6 kW fiber lasersnijmachine, uitgerust met een Reci‑laserkop en een efficiënt werkbereik van 3000 × 1500 mm, biedt uitstekende prestaties voor zowel dunne als dikke metalen platen. Echt 6000 watt vermogen voor het snijden van staal, RVS, aluminium, koper en messing Reci‑laserkop voor stabiele prestaties, hoge snijkwaliteit en lage onderhoudskosten Compact werkbereik van 3000 × 1500 mm, ideaal voor standaard platen en efficiënte productie Strakke snijranden zonder nabewerking Hoge productiesnelheid, perfect voor seriewerk en industriële toepassingen Betrouwbare onderdelen: Reci‑kop, Fuji servo’s, HIWIN geleiders Gebruiksvriendelijke CNC‑besturing met hoge nauwkeurigheid Lage energieconsumptie vergeleken met CO₂‑lasers ⚙️ Technische specificaties Werkbereik: 3000 × 1500 mm Vermogen: 6000 W fiber laser Positioneringsnauwkeurigheid: ±0,03 mm Herhaalnauwkeurigheid: ±0,02 mm Snijsnelheid: tot 40 m/min Snijdikte: tot 20 mm, afhankelijk van materiaal Lodpszyv Syjfx Agrort Koelsysteem: industrieel waterkoelsysteem

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, laser type: fiber laser, laser power: 3,000 W, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Type: Two chucks Groove function: Standard Power range: 3KW, 6KW Round tube processing range: 10mm~160mm Square tube processing range: 10mm~160mm Chuck maximum speed: 130r/min Machine weight: 3T Lrjdewwz Dlepfx Agrjt Power specification: 380VAC, 50Hz Optional loading rack: G16pro-automatic loading, G16pro-semi-automatic loading Optional unloading rack: servo unloading rack, cylinder unloading rack Standard: System 3000DE-DH, including nesting, supports servo, dustproof (Y axis), dustproof (X axis), dustproof (Z axis), rear card hollow dust removal, short tail material Optional: safety fence (light curtain), radiation-proof glass