Used Exhaust Air Purification System for sale (51,448)

Condition: used, The machine is suitable for the agglomeration of thermoplastic films and fibres. The throughput can be estimated to be 500 kg - 1000 kg/h, depending on the material, its condition and humidity. The system consists of: • conveyor belt • load-dependent control for the belt conveyor. • metal detector • HERBOLD granulator type SMS 45/100-H5-3 • pneumatic material transport to the storage silo • plastcompactor unit HV-70 (consisting of a storage silo feeding screw, plastcompactor, central blower, cooling circuit) • HERBOLD secondary granulator type SML 45/100-S4-2 • intensive cooling • SZS II 630/200 conveying fan • screening machine, undersize grain will be returned into the compactor silo. • material conveyor type MFT with big bag station and automatic switchover to the on-site silo Kdsdoztm Dmepfx Ai Rsr • automatic exhaust air filter • electrical control unit • compressor.

Condition: used, The machine is suitable for the agglomeration of thermoplastic films and fibres. The throughput can be estimated to be 500 kg - 1000 kg/h, depending on the material, its condition and humidity. The system consists of: • conveyor belt • load-dependent control for the belt conveyor. • metal detector • HERBOLD granulator type SMS 45/100-H5-3 Kdedpfx Asztm Hbei Ror • pneumatic material transport to the storage silo • plastcompactor unit HV-70 (consisting of a storage silo feeding screw, plastcompactor, central blower, cooling circuit) • HERBOLD secondary granulator type SML 45/100-S4-2 • intensive cooling • SZS II 630/200 conveying fan • screening machine, undersize grain will be returned into the compactor silo. • material conveyor type MFT with big bag station and automatic switchover to the on-site silo • automatic exhaust air filter • electrical control unit • compressor.

Condition: used, Year of construction: 2003, machine/vehicle number: 519553, Central extraction system Adlolph & Co. (JKF) with screw conveyor and rotary valve. Manufacturer: Adolph & Co. (JKF) Type: AC 2 LK Year of manufacture: 2003 Suitable for dust and chips Volume flow: approx. 16,000 m³/h With air recirculation 1 piece Sluice filter, galvanized - Year of manufacture 2003 - AC 2 LK - Filter area: approx. 150m² - Cleaning of the filters via a vibration motor - Filter housing made of galvanized sheet steel - 3 inspection doors - Pressure relief surfaces - Exhaust air connection according to local requirements - Filter base frame in welded steel construction, galvanized. - Including dry extinguishing line, C connection 3 pieces Extraction fans: 1 piece Manufacturer: JKF Type: JK - 40K L Motor power: 11.0 kW Speed: 2,400 rpm Air flow: ~ 10,800 m³/h 1 piece Manufacturer: JKF Type: JK - 30K L Motor power: 7.5 kW Speed: 2,900 rpm Air flow: ~ 7,500 m³/h 1 piece Manufacturer: JKF Type: JK - 30K L Motor power: 7.5 kW Speed: 2,900 rpm Air flow: ~ 7,500 m³/h1 piece Pipe components Air return - incl. galvanized ducts - Must be supplemented for a new location 1 piece Control cabinet With PLC Siemens control, in dustproof sheet steel standard housing, designed as a wall cabinet.Designed for: Installation dimensions: Kedpfx Aieywd I Ts Rjdr - Length: 5,250 mm - Width: 1,300 mm - Height: 4,650 mm (may vary depending on equipment) Electrical connection value: - Approx. varies depending on number of fans - 400 V/50 Hz - Control voltage 230 V AC/24 V DC - Location, not in stock

Condition: refurbished (used), Year of construction: 2020, Dear customers, For prompt and reliable processing of your request, we kindly ask you to contact us preferably by email. This way, we can directly assign your request to the appropriate contact person, gather all information and documents completely, and process your request as quickly as possible. We look forward to hearing from you and will be happy to assist you! TSWa 20.20 Dry spray wall Dimensions: 2000 x 2000 mm (W x H) Fan mounted above the wall + Fan height adjustment Airflow: 7,200 m³ / h Motor: 0.75 kW, explosion-proof (ATEX) Exhaust pipe: 500 Ø mm Depth: 900 mm The piping should not exceed a total length of 3-4 meters. Double filtration: paper filter + Paint stop filter mat Clamping rail (+150 EUR net) Options/additional cost for: Paint stop filter mat with clamping rail: 150 EUR net Side guide plates with hinges: 590 EUR net Images may vary. We would also be happy to offer you complete spray booths with supply air system, heat exchanger, supply air ceiling, piping, etc. Simply contact us. Kdodpfx Aijfv Hiqe Rer

Year of construction: 2021, operating hours: 5,297 h, condition: used, functionality: fully functional, machine/vehicle number: 200/751/15-21/6HE-35-40P/450, Complete drying system, consisting of 1 Harter Airgenex 20,000 dehumidification module and 2 TS 1800-5 drying chambers, each with 5 pull-out drawers with vacuum extractors, insulated air ducts, and an additional circulating air fan. The system is designed for drying XPS panels coated with mortar and glass fiber mesh without warping. Kdjdpfx Aiozmw Hls Rer Year of manufacture: 2021. The drying chambers are very robustly manufactured by Sondermaschinenbau Bannik. The system is also sold as individual components; an inspection is possible. The refrigerant has been evacuated and is stored separately in a steel cylinder (20 kg). Price negotiable.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 1,618 h, travel distance Z-axis: 430 mm, number of axes: 5, number of slots in tool magazine: 16, table length: 4,300 mm, table width: 2,205 mm, spindle motor power: 13,000 W, spindle speed (max.): 20,000 rpm, swivel angle B-axis (min.): -99 °, swivel angle B-axis (max.): 100 °, swivel angle C-axis (max.): 360 °, This 5-axis BIESSE Rover A FT 2243 including WINSTORE 3D K1 was manufactured in 2014. It operates on a 400 V power supply. With approximately 1,700 hours of axis movement, this CNC wood machining centre is designed for precision and efficiency. If you are looking to get high-quality wood machining capabilities, consider the BIESSE Rover A FT 2243 machine we have for sale. Contact us for further details. Technical Data • Working Table Dimensions: 4,300 × 2,205 mm • Maximum X-Axis Speed: 80 m/min • Maximum Y-Axis Speed: 60 m/min • Maximum Z-Axis Speed: 20 m/min • Z-Axis Travel (3-/4-Axis Version): 325 mm • Z-Axis Travel (5-Axis Version): 430 mm • Maximum Workpiece Clearance in Z: 170 mm • Maximum Workpiece Clearance with Sweeping Arm: 120 mm • X-/Y-Axis Drive: Rack and Pinion • Z-Axis Drive: Ball Screw • Axis Guides: Linear Guides with Recirculating Ball Bearing Blocks • Vacuum Pump Capacity: 300 m³/h at 50 Hz • Vacuum System: 20 Independent CNC-Controlled Zones • Working Fields: 2 • Clamping Areas: 2 in X • Pneumatic Stops: 16 • Grid Table Pitch: 30 mm • Vacuum Module Dimensions: 132 × 146 mm • Vacuum Module Height: 29 mm • Vacuum Module Rotation Increment: 15° • Air Cushion Table Blower: Yes • Maximum Single Panel Thickness: 50 mm • Minimum Single Panel Thickness: 9 mm • Maximum Multiple-Panel Loading Thickness: 20 mm • Maximum Multiple-Panel Unloading Thickness: 60 mm • Protective Board Thickness: 8–25 mm • Maximum Panel Weight: 200 kg • Minimum Loadable Panel Size in Y: 800 mm • Unloading Conveyor Length: 4,800 mm • Maximum Unloadable Panel Length: 4,300 mm 5-Axis Machining Unit • Number of Axes: 5 Interpolating Axes • Tool Interface: HSK F63 • Cooling: Liquid-Cooled • Power S1: 11 kW / 15 HP at 12,000 rpm • Power S6: 13 kW / 17.4 HP at 12,000 rpm • Maximum Spindle Speed: 20,000 rpm • C-Axis Rotation: 360° Continuous • C-Axis Speed: 12.4 rpm • B-Axis Positioning Range: ±100° • B-Axis Speed: 12.4 rpm • Spindle Bearings: Ceramic Kdedpfxszuygqe Ai Rer • Drive Motor: Brushless, Digitally Controlled • Gearbox: Harmonic Reduction Gear • Lubrication: Lifetime Lubrication Drilling Head • Type: BH 26 2L • Maximum Number of Tools: 26 • Vertical Drilling Spindles: 16 • Vertical Spindle Arrangement: 8 in X / 8 in Y • Vertical Spindle Pitch: 32 mm • Horizontal Drilling Spindles: 4 with Double Output • Horizontal Spindle Axis Distance: 32 mm • Grooving Saws: 2 • Grooving Saw Directions: X / Y • Grooving Saw Diameter: 120 mm • Maximum Grooving Depth: 25 mm • Motor Power: 1.7 kW at 2,800 rpm / 3 kW at 6,000 rpm • Maximum Drilling Speed: 6,000 rpm Tool Magazine • Type: Turret Tool Magazine • Capacity: 16 Tools • Tool Position Spacing: 114 mm • Maximum Tool Diameter with Full Magazine: 110 mm • Maximum Individual Tool Weight: 7.5 kg • Maximum Total Tool Weight: 55 kg Automatic Loading / Unloading • Loading Direction: Front • Material Flow: Right to Left • Loading / Unloading System: Type B • Suction Cups: 5 • Automatic Loading Capacity: Up to 3 Panels • Sweeping Arm: Yes • Automatic Table Cleaning: Yes • Loading Table: Automatic X/Y Alignment • Unloading Conveyor: Motorized • Conveyor Control: CNC-Controlled • Conveyor End Detection: Photocell WINSTORE 3D • System: WINSTORE 3D K1 • System Length: 16,000 mm • Beam Length: 8,000 mm • Additional Modules: 3,000 / 6,000 / 8,000 mm • Maximum Suction Frame Length: 5,200 mm • Cross Conveyors: Belt Type, 5,200 mm • Panel Handling: Raw and Thin Panels • Panel Weight Detection: Load Cell

Condition: good (used), functionality: fully functional, SafeFAST Elite 212D flow cabinet with stand Manufacturer: Faster-Air Model: SafeFAST Elite 212 D Kdedev Dhynepfx Ai Rer “Technical data sheet” from the manufacturer: Useful dimensions (mm): WxDxH: 1192x580x740 Overall dimensions (m): WxDxH: 1350x855x1545 Noise level (dbA): -54 Working aperture (mm): 200 Exhaust flow rate (m3/h): 390 Lighting level (lux): 1200+ Weight (kg): 195 Electrical data: 230 V – 50 Hz

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 1539000208A, travel distance X-axis: 1,035 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, controller model: Heidenhain TNC 620, rotational speed (max.): 10,000 rpm, Note: The seller can offer disassembly and loading for an additional charge. TECHNICAL DETAILS Travel range, X-axis: 1,035 mm Travel range, Y-axis: 560 mm Travel range, Z-axis: 510 mm Rapid traverse rate: 25 m/min Table size: 1,200 × 560 mm Motor spindle speed: 10,000 rpm AC main drive power: 13/9 kW at 40/100 % duty cycle Tool positions: 20 Tool holder: SK 40 MACHINE DETAILS Control system: Heidenhain TNC 620 Connected load: 17 kVA Rated current: max. 28 A Fuse rating: 35 A Supply voltage: 400 V Kedpfx Aisztb Ims Rodr Supply frequency: 50 Hz Input voltage: 230 V Output voltage: 24 V Weight: 4,100 kg EQUIPMENT Electronic handwheel Chip conveyor with extended coolant tank Coolant air blast switchover Coolant spray gun Heidenhain TS 649 touch probe

Year of construction: 2018, condition: used, functionality: unexamined, laser power: 150 W, laser wavelength: 450 nm, number of axes: 3, Custom Laser Laboratory System (3-Axis CNC) with Nuburu Blue Laser – Year of Manufacture 2018 Offered for sale is a used, custom-built laser laboratory system (“LaserProcessingCell / LPC-CNC”, project P106), constructed in 2018 as an internal research and development system for process testing. The system was built as an OEM special design to individual specification and was operated exclusively in-house. Equipment / technical features (documented) • 3-axis CNC design (X/Y/Z) for flexible workpiece positioning • Drives: 3× Bosch Rexroth IndraDrive HCS01 with Rexroth MSM031C servo motors • Control: Beckhoff (C6920 industrial PC, EK1100 EtherCAT coupler, EL terminal system) with functional safety (Beckhoff TwinSafe EL1904/EL2904) and Pilz PZE X4 safety relay • PC-based operation with monitor and keyboard • Safety / operating elements: door interlock (Schmersal), emergency stop, operator panel, signal tower, laser warning light • Electrical supply: 230 V / 1~ / N / PE, max. 16 A fuse protection • Electrical / wiring diagram available Scope of delivery • Base system (cell, 3-axis system, control cabinet, operator panel) as described above • Laser source Nuburu AO-150 (Class 4 blue laser): wavelength 450 nm, output power 150 W, adjustable 0–100%, SMA-905 fiber (5 m), operation 200–240 V / 1~ / 50–60 Hz, serial no. 31, manufactured 2019, Made in USA; water-cooled • Processing optics Nuburu BlueWeld 100 (fixed focusing / welding head): focal length 100 mm, clear aperture 90 mm, QBH fiber input, integrated air knife, replaceable cover glass, sealed design, aluminum, approx. 5 kg • Extraction and filter unit Fuchs Umwelttechnik MKF320L (230 V, approx. 1.2 kW, IP 42, year of manufacture 2018, CE-marked) • Recirculating chiller Termotek Location / price / viewing • Location: Argelsrieder Feld 14, 82234 Wessling • Price: 35,000 EUR (Negotiable) Kedpfxszr Ircj Ai Redr • On-site inspection is expressly recommended Important notes – please read before enquiring • The system was built as an internal R&D / laboratory device and does not carry CE marking as a complete machine (individual components such as the extraction unit are separately CE-marked). • No operating manual or further technical documentation exists apart from the wiring diagram. • This is a Class 4 laser system (highest laser hazard class, visible blue laser radiation ~450 nm). • The laser source is a US product; no manufacturer support, manufacturer warranty, or spare-parts supply is promised. • Information on components is based on available documentation. Condition, completeness, and functionality are to be verified by the buyer during inspection. Sales conditions / disclaimer The sale is made as a used system, “sold as inspected”, with the exclusion of any and all warranty to the extent legally permissible in business-to-business transactions. No representations are made as to function, accuracy, performance, or fitness for a particular purpose. Commissioning, establishing CE conformity, risk assessment, laser safety (Class 4 laser system), and compliance with all applicable safety and operating regulations are the sole responsibility of the buyer.

Condition: new, Year of construction: 2022, Storage location number: 100552399 Transport dimensions (L x W x H): 0 x 0 x 0 ---- The compressor features a reliable, electronically controlled Cummins engine equipped with an exhaust aftertreatment system (SCRT®) and meets all legal Stage V emission limits according to (EU) 2016/1628. SCRT® system Large diesel and urea tank (AdBlue) Patented pre-compression of compressed air through an additional turbocharger Standard fuel pre-filter with water separator Standard oil temperature control valve to prevent condensate formation User-friendly display Simple adjustment of the operating pressure in 0.1-bar increments Individual fault indication Fast fault diagnosis Yellow rotating beacon Kdjdpfx Aszkzvxei Rsr Battery disconnect switch as standard Operating weight under 3,500 kg Pressure range: 7 to 24 bar Volume flow: 20 to 27 m³/min Chassis currently disassembled? Version with chassis available on request.

Condition: new, Year of construction: 2026, Power 5.5 kW / 6.6 kW Inverter yes Motor speed 4500 rpm Voltage and frequency: 400V / 50Hz Tank: 200 liters Water resistance: IP23 Noise level: 75 dB Working pressure: 10 bar Air flow: 640 l/min Suction capacity: 750 l/min Discharge capacity: 640 l/min Drive type: Direct drive Outlet diameter: G 3/4″ Dryer: None Air-to-oil cooler Screw manufacturer: BAOSI Kjdpszr Nauofx Ai Rodr Inverter: GD300-01A Display: HTK070 / MAM6070 Dimensions (length/width/height): 1446 × 506 × 1096 mm Packaged dimensions (length/width/height): 1385 × 520 × 1200 mm Weight 180 kg / 200 kg

Condition: used, Year of construction: 2003, functionality: fully functional, type of input current: three-phase, overall weight: 620 kg, filter area: 60 m², suction capacity: 5,000 m³/h, negative pressure: 2,500 Pa, Dust extraction unit, fume extraction unit for welding, self-cleaning cartridge filter, pneumatic, vacuum-based system for plasma cutting, laser cutting, sandblasting, soda blasting, shot blasting, and for all types of dry dust. Kdjdpfx Aszil Ivei Rjr Kemper System 8000 The filter is pneumatically cleaned with pulses of compressed air during operation, ensuring high device efficiency. The fan is located on the clean air side, minimizing the risk of explosion. Year of manufacture: 2003 Fans with a power of 5.5 kW. Flow rate: 5000 m3/h Vacuum: 2500 Pa Filtration area: 60 m2 Stock number: 1147

Condition: used, Year of construction: 2003, feeder rollers, transfer belts for 6 meters, retractable forks, lift tables with rubber-coated parcel drive chains, outfeed chains Kedpsycxtysfx Ai Redr

Condition: good (used), Year of construction: 2013, MANUFACTURER GRASSAIR TYPE RLR150V7 AIR Serial No. API211340 Year 2013 Power (kW) 110 Capacity (m3/min) 10 Pressure (bar) 9.5 Operating hours (DOC/TOTAL) 43007 Frequency inverter yes Built-in dryer no Kdsdpfoykagqjx Ai Ror Heat exchanger yes Cooled (air/water) air On tank no Documents no Connection 2 NEW/USED used

Condition: used, Dimensions (L/W/H) 1400/2000 x1400 x3000 mm Kdsdpfx Aievwfu Ao Rsr Dimensions (L/W/H) 1400/2000 x1400 x3000 mm 2x 220/1x 180 mm with 14 suction nozzlespneum. slide controlfan dischargevacuum system in compact designwith 12 built-in automatic slide valvesused, good conditionmake ALKOtype FU-2-12-800-70-III-Ano. 910225length 1400 / 2000 mmwidth 1400 mmheight 3000 mm12 x air intake D 180 with slide2 x air intake D 220 without slidecladdingshaking downwith discharge via fancompl. controlair return recirculation exhaust air D approx. 500 mmwith fan 2 pieceseach 0,9 3,0 kW - pole-changing motor1450 / 2800 rage location 97447 Gerolzhofendelivery as-is, free-loadedwithout guarantee and warranty

Condition: good (used), Year of construction: 2020, functionality: limited functionality, machine/vehicle number: ADL 2200/6, total height: 2,200 mm, Insulated glass production line and refrigerator with pumps for water purification a) ADL 2200/6 insulated glass production line b) BM7 butilex applicator, 7 kg c) TMPB 200 two-component extruder Kdodszgu Rhepfx Ai Rer d) F-200 refrigerator e) PKM strip cutting machine f) SM 25 strip filling machine g) R.T.M. rotary table h) Water purifier

Condition: reconditioned (used), Year of construction: 2017, machine/vehicle number: SN48357, functionality: fully functional, Chamber furnace with exhaust hood, fully refurbished, 12-month warranty, available for immediate delivery Kodpfotbq Eqsx Ai Redr - Max. temperature: 1300 °C - Internal dimensions (W x D x H): 400 x 400 x 400 mm - Capacity: 60 liters - Separate main switch - 5-sided heating - Supply and exhaust air with electrically actuated dampers (driven by Belimo actuators) - Supply air fan with frequency converter, controlled via regulator - Stainless steel exhaust hood - Bentrup 507 control system with thyristor control - Note: Controller language is German only; switching to other languages is not possible! - Additional drag element Type S for external recording - Documentation included - Net weight: 250 kg - Power consumption: 18 kW - Current rating: 26 amperes - Supply voltage: 3/N/PE 400VAC - Connection type: prepared for fixed connection, 32 A plug - Documentation, CE declaration - Electrically tested and supplied with current DGUV test protocol Inspection by appointment. Furnace, furnaces, annealing furnace, industrial furnace, chamber furnace, kiln, curing furnace, tempering furnace, laboratory furnace, hardening furnace, ceramic furnace

Year of construction: 2011, condition: not inspected (used), Complete gas treatment and catalytic oxidation system with heat recovery – built in 2011 On behalf of our client, we offer a high-quality industrial gas treatment and catalytic oxidation system for sale. The system was originally designed and built for the treatment of methane, hydrogen sulfide, and hydrocarbon-containing gas streams from a geothermal application. It is still fully assembled and can be inspected by appointment. The system was taken out of service in 2015 in functional condition and subsequently decommissioned professionally. All components in contact with the process medium were emptied and cleaned. Since the decommissioning, the system has neither been operated nor regularly maintained. A current functional test has not been carried out. Before recommissioning, a technical inspection and, if necessary, the modernization of individual components – in particular, the control and automation technology – are required. Technical data Manufacturer: KOPF Holding GmbH (complete system) Model: Customer-specific special system Year of construction: 2011 Process air/exhaust gas flow rate: up to 6,000 Nm³/h Methane conversion according to original design: 90% Burner output: 250 kW Waste heat utilization: up to approx. 370 kW thermal output System scope Vacuum degassing system Hydrogen sulfide absorber Vacuum compressor system Water treatment Catalytic oxidation system Catalytic reactor up to 750 °C Two-stage pre-filtration Stainless steel main heat exchanger Waste heat recovery heat exchanger Gas burner Frequency-controlled main fan Dräger gas measurement technology Siemens S7 control system with process visualization Extensive measuring, control and safety technology Documentation Extensive original documents are available for the system, including: Kodpfx Aiozr T Dke Redr Process description Layout drawings Piping and instrumentation diagrams (P&IDs) Isometrics Quotation and project documentation The completeness of Ex certificates and pressure vessel documentation is currently being checked. Condition System completely assembled Taken out of service in functional condition in 2015 Components in contact with the process medium emptied and cleaned Not operated since decommissioning Sale in current condition Inspection possible by appointment The system is particularly suitable for applications in gas treatment, methane oxidation, VOC/exhaust gas purification, biogas, landfill gas or comparable industrial processes. Sale is on behalf of the client. Technical data is provided to the best of our knowledge based on the available original documents. A current functional test has not been carried out. Errors, changes and prior sale are reserved.

Condition: used, machine/vehicle number: 006710, Type of edging: Thin edge, Thick edge, Solid wood, Veneer Kedpfoqy Em Tsx Ai Rjdr Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 11 m/min

Condition: used, Year of construction: 2017, functionality: fully functional, input voltage: 400 V, input current: 16 A, total width: 1,400 mm, total length: 1,500 mm, machine base height: 1,400 mm, overall weight: 350 kg, Hello, I am offering a used Corona / Plasma treatment system for sale. The material to be treated is placed on a conveyor belt. Sensors automatically activate the plasma / corona discharge when the substrate is positioned beneath the head. The feed speed is adjustable. The conveyor belt has a width of 650 mm. The system is mounted on casters, making it mobile. An exhaust fan is also installed and only the exhaust air needs to be ducted outside. This system is ideal for treating the surfaces of plastic materials or glass to improve printability. It is also suitable for the pretreatment of materials to enhance adhesion for bonding. Kjdpoy A Trlofx Ai Redr If you have any questions, please feel free to contact me.

Condition: used, functionality: fully functional, Year of construction: 2017, control type: CNC control, controller manufacturer: Bystronic, controller model: ByVision, laser type: CO₂ laser, laser source manufacturer: Bystronic, laser source model: ByLaser 6000, laser power: 6,000 W, laser wavelength: 10,600 nm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 25 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, travel distance X-axis: 3,048 mm, travel distance Y-axis: 1,524 mm, travel distance Z-axis: 80 mm, positioning speed: 120 m/min, positioning accuracy: 0.1 mm, repeat accuracy: 0.05 mm, workpiece weight (max.): 890 kg, type of cooling: water, overall weight: 15,000 kg, Equipment: cooling unit, documentation/manual, nozzle changer, safety light barrier, BYSTRONIC BYAUTONOM 3015 - 6 KW CO2 LASER CUTTING SYSTEM WITH SHUTTLE TABLE | YEAR 2017 The Bystronic ByAutonom 3015 (year 2017) is a CO2 laser cutting system with 6 kW resonator power for sheets up to 3000 x 1500 mm. It combines a ByLaser resonator with the ByVision control and a shuttle table system. With automatic nozzle and lens-cassette changer, low-manning continuous operation in multi-shift production is possible. CONDITION Kdjdsydq Hnepfx Ai Rsr - Condition: Used. Functional scope as per the technical data below. - Details on the technical condition individually upon serious interest. - Viewing possible by arrangement (no demonstration under power). - Condition/Maintenance Messenger on board: reports machine status and maintenance intervals. FUNCTION & APPLICATION Laser beam cutting (LBC) with flying optics - the cutting head moves over the stationary sheet. It processes structural steel, stainless steel and aluminium. The shuttle-table system allows loading and unloading during ongoing cutting. Cutting programs run via ByVision; the system is prepared for Bystronic automation (ByTrans Extended). Applications: metalworking industry, plant and apparatus engineering, structural steelwork, precision-part manufacturing. TECHNICAL DATA - Bystronic ByAutonom 3015 | Laser type: CO2 | wavelength 10.6 micrometres | flying optics - Laser power: 6,000 W (resonator ByLaser 6000) | Year: 2017 - Nominal sheet format: 3000 x 1500 mm | cutting range X 3048 / Y 1524 / Z 80 mm - Max. workpiece weight: 890 kg - Max. material thickness structural steel: 25 mm - Max. material thickness stainless steel: 25 mm - Max. material thickness aluminium: depends on power class and configuration, confirmed during inspection - Positioning speed approx. 120 m/min | axis acceleration 30 m/s2 - Positioning accuracy +/- 0.1 mm | repeatability +/- 0.05 mm - Drive: linear drives Y/Z, high-torque motors X | Machine weight: 15,000 kg - Installation dimensions approx. 12,800 x 6,300 x 2,400 mm (equipment-dependent) - CNC: Bystronic ByVision | touchscreen + manual control unit - Automatic nozzle and lens-cassette/cutting-head changer (standard) | Shuttle-table system - Automation: ByTrans Extended compatible | Condition/Maintenance Messenger | Safety light barrier Serial number, connected load, gas/compressed-air demand and chiller capacity on request. SCOPE OF DELIVERY - 1 x Bystronic ByAutonom 3015 (CO2 laser cutting system) - 1 x CO2 resonator ByLaser 6000 (6,000 W) - 1 x Bystronic ByVision CNC control with touchscreen and manual control unit - 1 x Automatic nozzle changer | 1 x Automatic lens-cassette changer - 1 x Shuttle-table system | 1 x Chiller (water circuit) - 1 x Machine documentation LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border. Dismantling, transport, installation and commissioning by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM) trades in structural-steel and sheet-metal processing machinery. Further machines on request. CONTACT / INQUIRY Viewing by arrangement | Price on request. Sale exclusively to commercial customers (B2B).

Condition: good (used), Year of construction: 1980, Compressed air tank, pressure vessel, pressure tank, compressed air reservoir, pressure vessel, compressor tank, air receiver for oil-air separation system, condensate separator, oil and water separation apparatus, oil separator, oil/water separator, air compressor oil-water separator, air receiver -Manufacturer: Atlas Copco, Air tank standing from compressor type GA 408 Pack -Type: 19650295-49 -Contents: 46 l Kedezt I I Tjpfx Ai Rodr -Operating pressure: 11 bar -Accessories: incl. attachments, see photos -Dimensions: 520/300/H1010 mm -Weight: 62 kg

Condition: new, SAPI Powder Coating The Perfect Coating for Lasting Protection. Powder coating is a highly effective and widely used method for applying a protective and decorative surface to various types of substrates. It is a dry finishing process where a fine powder made of resins, pigments, and additives is applied to a substrate. The powder is electrostatically charged, allowing it to adhere evenly to the surface and form a uniform coating. To achieve optimal adhesion and durability, the substrate is thoroughly cleaned and prepared first. Oils, dirt, and other contaminants are removed to ensure a clean surface. This is crucial for ensuring that the powder bonds effectively to the substrate, creating a strong and long-lasting coating. Components of a Powder Coating System A typical powder coating system consists of several components and devices required for applying and curing the powder coating. Spray Booth and Spray Area The booth provides a clean environment for the application process and ensures an even distribution of the powder. 🎨 Powder Coating Gun A powder coating gun is used to apply the powder coating to the workpiece. 💨 Powder Feed System The powder feed system consists of a hopper or container where the powder coating material is stored. It typically includes devices like powder pumps, feed hoses, and powder sieves to transport the powder from storage to the spray gun. 🔄 Pre-treatment Equipment Pre-treatment systems are used to prepare the substrate before applying the powder coating. This can include processes like cleaning, degreasing, rinsing, and surface treatment to ensure proper adhesion and durability of the coating. 🧼 Curing Oven A curing oven is a crucial component of a powder coating system. It is used to heat the coated substrate to the correct temperature so the powder coating melts, flows, and hardens into a permanent surface. The oven usually consists of a conveyor system or racks to transport the coated parts through the oven chamber. 🔥 Exhaust System An exhaust system is installed to remove excess powder, fumes, or volatile compounds generated during the coating process. It helps maintain a clean and safe work environment for the personnel and prevents the accumulation of powder particles in the air. 🌬️ Looking for a Powder Coating Solution? Are you searching for a custom powder coating solution? We specialize in providing tailored powder coating solutions to meet your individual needs. Whether you have specific color requirements, complex designs, or challenging substrates, our experienced team is ready to deliver exceptional results. 💡 Kdedpjun Sd Uefx Ai Rjr Contact us today to discuss your requirements, and let us develop a custom powder coating solution for you. 📞 Get in touch with us today!

Condition: good (used), Year of construction: 2009, functionality: unexamined, machine/vehicle number: 096106384, input voltage: 230 V, overall weight: 451 kg, input frequency: 50 Hz, Edwards Helios-E Gas Abatement system in Excellent Condition! Description: system for Effective exhaust management of CVD processes for semiconductor processing. Manufacturer: Edwards Model: Helios-E Sr.no. 096106384 Manufactured 2009 Power: 1Ph, 230V, 50 Hz. Kodpov Diqnofx Ai Rjdr Weight: 451 kg With documentation

Condition: excellent (used), For sale: Professional KEYENCE IM-7500 measuring system with IM-7020 head. The device is designed for fast and highly precise measurement of components in production and quality control. The equipment enables automatic measurement of multiple dimensions simultaneously using a camera. Ideal for CNC workshops, tool rooms, and industrial applications. Kdsdpfoyvv Trex Ai Rsr Technical data Manufacturer: KEYENCE Model: IM-7500 Head: IM-7020 Type: Optical measuring system Country of origin: Japan Automatic measurement by camera High measurement accuracy Condition Used Fully functional Normal signs of use Included in the set KEYENCE IM-7500 unit IM-7020 head Monitor Control unit Keyboard and mouse Wiring