Used Exner Eex Sl 40 for sale (23,442)

Condition: refurbished (used), battery capacity: 620 Ah, battery voltage: 80 V, total height: 784 mm, total length: 1,025 mm, total width: 708 mm, Tested forklift battery for your truck – 80V 4PZS 620Ah – DIN A + 1-year warranty + Complete with aquamatic system + Includes end discharge device & REMA 320 connector (other plug types can be installed upon request) + Capacity: minimum 90–100% (C5 capacity protocol is provided with delivery) + Year of manufacture: 2024 Dimensions: Length: 1,500 mm Width: 708 mm Height: 784 mm Weight: approx. 1,600 kg Suitable for the following models and more: Linde E 20 - 325-00 Linde E 20 / 600 - 387-00 Linde E 20 / 600 H - 1252-01 Linde E 20 / 600 H - 387-00 Linde E 20 / 600 RH - 387-00 Linde E 20 H - 387-00 Linde E 20 HOCH - 325-00 Linde E 20 HOCH - 336-00 Linde E 20 P - 325-00 Linde E 20 Z - 325-00 Linde E 25 - 325-00 Linde E 25 - 336-00 Linde E 25 - 387-00 Linde E 25 / 600 - 387-00 Linde E 25 / 600 H - 1252-01 Linde E 25 / 600 H - 387-00 Linde E 25 / 600 RH - 387-00 Linde E 25 CH - 387-00 Linde E 25 H - 387-00 Linde E 30 CH - 387-00 Linde E 30 H - 387-00 Linde E 30 P - 325-00 Linde E 30 SH - 1276-00 Linde E 35 - 337-00 Linde E 35 - 337- Linde E 35 P - 337-00 Linde E 40 P - 337-00 Linde K - 5231-00 Linde K - 5231-00 – side battery change Linde K 12 - Linde K 15 - Linde P 200 - 370-00 Linde P 250 - 127-00 – vertical battery change Linde P 250 S - 127-05 Linde P 250 SWB - 5007-10 – side battery change Linde P 250 SWB - 5007-10 – vertical battery change Still MX-X Still R. 07-25 Still R 60-20 Still R 60-22 Still R 60-25 Still RX 60-25 Still RX 60-30 Jungheinrich EFG 25 Jungheinrich EFG 425 Jungheinrich EFG 425 K Jungheinrich EFG V 25 Jungheinrich EKX 515 Jungheinrich EKX 515 K Kdodswzvy Njpfx Afdsk Jungheinrich EKX 525 K Jungheinrich ETX Toyota 7FBMF20 Toyota 7FBMF25 Toyota 8FBMKT25 Toyota 8FBMKT30 Toyota FBM25 Toyota FBMF20 Toyota FBMF25 Crown TSP 6000 - B Crown TSP 6000 - C Crown TSP 7000 Atlet EH 25 Balkancar EV715 Balkancar EV720 Clark GEX25 Heli CPD 30 Heli CPD 35 Hubtex MQ 40 Hyster E5XN Hyster J2.0 Hyundai 25BHA7 Mitsubishi FB25CN Nissan 1Q2L25Q Nissan QX25 Common battery sizes available on request. Transport available.

Condition: refurbished (used), battery capacity: 775 Ah, battery voltage: 80 V, total height: 784 mm, total length: 1,024 mm, total width: 852 mm, Tested forklift battery for your truck - 80V 5PZS 775Ah - DIN A + 1 year warranty + Includes aquamatic watering system + Includes end cell connector & REMA 320 plug (other plugs can be installed on request) + Capacity: min. 90–100% (C5 capacity protocol included upon delivery) + Year of manufacture: 2024 Dimensions: Length 1,024 mm Width 852 mm Height 784 mm Weight: approx. 1,920 kg Suitable for the following models and others: Linde E25-325-00 Linde E25/600-336-00 Linde E25/600 HL-387-00 Linde E25/600 RHL-387-00 Linde E25/600 S -336-00 Linde E25 H-387-00 Linde E25 Hoch-336-00 Linde E25 SH-1276-00 Linde E30-325-00 Linde E30/600-336-00 Linde E30/600-RHL/HL-387-00 Linde E30/600 S-336-00 Linde E30 H-387-00 / Hoch Linde E30P -325-00 Linde E30 SH-1276-00 Linde E35/600H -388-00 Linde E35 H-/HL -387-00 Linde E35 P -337-00 Linde E35 RHL -387-00 Linde E35 SH-1276-00 Linde E40 -337-00 Linde E40 C -388-00 Linde E40 P -337-00 Linde E45/C/600H -388-00 Linde K 5231-00 / side shift Linde P250 -127-00 Linde P250L -127-05 Still R60-30 Still RX60-25/-30/-30L/-35/-40 Crown TSP 6000-C/-D Crown TSP 7000 Jungheinrich EFG 430 Jungheinrich EFG 530 Jungheinrich EFG 535 Jungheinrich EFG 540 Jungheinrich EFG 545 K Jungheinrich EFG 550S Jungheinrich EFG V25 Jungheinrich EKX 516 Toyota 7FBMF30/35 Toyota 8FBMKT20 Toyota 8FBMT25/30 Atlet EH20/25/30 Caterpillar EP30K/FB30/35KPAC Cesab B635A Cesab Blitz350 Clark GEX30 Daewoo B30-32X Daewoo B35X-5 Hubtex MQ Hyundai 30BHA-7 Magaziner EK1500/2000 Mitsubishi FB25N Mitsubishi FB30K PAC Mitsubishi FB35K Mitsubishi FB35N Nissan QX30 Kdsdpfx Ajwzvxrsfdek Steinbock-Boss PE30D TCM FHB25-E1L Yale ERP 30VL Standard battery sizes available on request. Transport possible.

Condition: excellent (used), For sale: Professional turning and finishing holder with SK40 mounting, ideal for facing, finishing, and rough machining of end and flat surfaces. The high-quality tool steel construction ensures stability, rigidity, and high clamping precision. 📌 Technical data: Kjdjxizb Eopfx Afdedk • Type: Turning and finishing holder with insert • Mounting: SK40 DIN 69871 B • Dimensions: SK40 × 40 × 40 • Head diameter: Ø40 mm • Total length: approx. 60 mm • Condition: Used, very good technical condition – fully functional ✅ Advantages: • High machining accuracy and clamping rigidity • Suitable for use with indexable inserts • Designed for facing, finishing, and rough machining • Compatible with milling machines and machining centers with SK40 mounting

Condition: excellent (used), Vötsch Type: VC³ 4018/S Vötsch VC³ 4018/S Climate Test Chamber – Li-Ion CO/CO₂ −42 to +150 °C 400 V Air-cooled For sale is a temperature and climate test chamber from the renowned German manufacturer Vötsch Industrietechnik GmbH, model VC³ 4018/S, year of manufacture 2012. The unit is specifically equipped for testing lithium-ion batteries and features CO monitoring as well as CO₂ inertization for enhanced operational safety. Important Note: Due to these safety features, the test chamber is software-limited to a temperature range of −42 °C to +150 °C. The chamber is ideally suited for: - Li-Ion battery testing - Electronics and assembly testing - Temperature and climate stress tests - Development and quality assurance tasks Technical Data: Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm External dimensions: Width 870 mm x Depth 1550 mm x Height 1800 mm Test chamber volume: 190 liters Feed-throughs included as standard: R1: Ø 125 mm L1: Ø 50 mm Data for temperature tests: Temperature range: -42°C to +150°C Temporal temperature deviation: ± 0.1 to ± 0.5 K Spatial temperature uniformity: ± 0.5 to ± 1.5 K Temperature change rate: Heating 4 K/min Cooling 4 K/min Max. heat compensation: 2300 W Data for climate tests: Temperature range: +10 to +95 °C Dew point range: -3 to +94 °C Humidity range: 10 to 98 % RH Temporal temperature deviation: ± 0.1 to ± 0.3 K Spatial temperature uniformity: ± 0.5 to ± 1.0 K Temporal humidity deviation: ± 1 to ± 3 % RH Heat compensation: 400 W Operating data: Test chamber lighting: Halogen bulb 2 x 24V, 50W 3/N/PE AC 400V ±10% 50 Hz Rated power: 4.1 kW Rated current: 14 A Refrigerant: R-404A Weight: 470 kg Important Safety Information for Buyers! The following servicing steps are performed on our offered chambers in advance: 1. Function check and replacement of necessary components 2. If required, new refill with legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers undergo a documented test run. Condition: Used Kdsdpfxsx Slm Hs Afdek Scope of delivery: (See image) (Specifications and technical data are subject to change and errors are excepted!) If you have further questions, we are happy to assist you by phone.

Condition: used, Pneumatic press, pneumatic punch, multifunctional punch, punch, universal punch, punching machine -Pressure force: 0.23 ton -for: window making tools -pneumatic with: foot control -pneumatically operated -Air pressure: 12 bar Kdodpfxsd Dvgnj Afdok -Stroke: max. 50 mm -Insertion height: mm -Dimensions: 690/720/H1485 mm -Weight: 51 kg

Condition: used, PLC control, supply unit, converter, power module, U/E module -Power module: Simatics Power Module 240 6SL3224-0BE23-0AA0 -Input: 3 AC 380 - 480 V 10.2 A 50/60 Hz Ksdpfx Afjfivi Uedjdk -Output: 3 AC 7.7 A. -Power: 3 kW -Control unit: Simatics Control Unit CU240S PN F 6SL3244-0BA21-1FA0 -Dimensions: 155/270/H235 mm -Weight: 4.6 kg

Condition: used, PLC control, supply unit, converter, power module, U/E module Kjdpfx Afsfivkbededk -Power module: Simatics Power Module 240 6SL3224-0BE21-5UA0 -Input: 3 AC 380 - 480 V 4.8 A 50/60 Hz -Output: 3 AC 4.1 A -Power: 1.5 kW -Control unit: Simatics Control Unit CU240S PN F 6SL3244-0BA21-1FA0 -Dimensions: 230/75/H240 mm -Weight: 2.4 kg

Condition: used, PLC control, supply unit, converter, power module, U/E module -Power module: Simatics Power Module 240 6SL3224-0BE21-1UA0 -Input: 3 AC 380 - 480 V 3.8 A 50/60 Hz -Output: 3 AC 3.1 A -Power: 1.1 kW -Control unit: Simatics Control Unit CU240S PN F 6SL3244-0BA21-1FA0 Ksdpfsfivkcjx Afdedk -Dimensions: 230/75/H240 mm -Weight: 2.4 kg

Condition: used, Converter, power supply, power supply, switching power supply -Type: SL40.300 -Input: 3 AC 400/500 V Kdodpfx Afsdkk Umsdsk -Output: DC 24-28 V/40 A -Dimensions: 275/125/H120 mm -Weight: 3.25 kg

Condition: excellent (used), Year of construction: 2001, I sell the slot conveyor suitable for Industry use, for example wooden industry, material manipulation etc. For entry in the line or input in separate machine for pre-set material thickness. Brand: FINNROSE Total length 2,60m Band width 1400mm Kdedpfxjyc N Dvs Afdok Feeding with electric motor Fully working. Available immediately.

Condition: reconditioned (used), Year of construction: 2007, operating hours: 13,209 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,050 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 700 mm, bale weight: 500 kg, oil tank capacity: 400 l, year of last overhaul: 2025, volume flow: 108 m³/h, Technical data baler: Manufacturer according to type plate BRAMIDAN (original manufacturer Presto GmbH & Co. KG) Type HC 50 (corresponds to the Presto HPK 50) Year of manufacture 2007 Operating hours 13,209 hours, as of March Number of bales pressed: 23,379 bales Pressing force 50 tonnes Specific pressing force 650 kN/m² Feed chute dimensions 1250 x 1050 mm (L x W) Filling volume 0.96 cm³ Theoretical cycle time 32 seconds Theoretical throughput capacity 108 m³/hour Bale dimensions 1100 x 700 mm (w x h) length variable Drive power 15 kW Power consumption, total in 50 A Tying 4-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm approx. 3.1 t/hour Bulk weight of 60 kg/cbm approx. 4.5 tonnes/hour Bulk weight of 100 kg/cbm approx. 7.2 tonnes/hour Bale weights with a bale length of approx. 1.2 m up to 500 kg, depending on material Hydraulic oil tank capacity 400 litres PLC control Siemens S7-200 Effective transport dimensions excluding baler 6780 x 1800 x 2100 mm (l x w x h) Transport weight of press 8.5 tonnes Condition of the baler: The press was used in a production facility exclusively for pressing cardboard and was regularly serviced. With only 13,209 operating hours, the machine has seen little use. The press was partially overhauled in our workshop and then tested. The following overhaul work was carried out: Machine cleaned Bale retainer made operational and lubricated Light barrier replaced Twisting unit completely dismantled, broken down into individual parts, all bearings replaced, all plastic glides replaced, lubricated, chain tension adjusted Knife and counter knife dismantled, sharpened, reassembled Knife gap readjusted General maintenance work carried out and lubricated Scope of delivery: 1 baler with wire roll boxes, without wire 1 set of machine documentation Comments: Kedpjw U Dt Nsfx Afdedk The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, mileage: 663,000 km, power: 320 kW (435.08 HP), first registration: 08/2016, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 04/2025, brakes: retarder, color: red, gearing type: automatic, emission class: euro6, Year of construction: 2016, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, tail-lift, For sale is 1 x DAF Super Space Cab, multi-loader Engine damage 2nd OWNER * Manufactured in 2016 * First registration 08-2016 * Original KM 663,000 km * Intarder and ZF automatic transmission * Refrigerator * Stationary air conditioning * Luxury bed * Large closet * 2 x TANKS * OBU prepared * Driver's seat LUXURY * Leather interior * Spoilers and fenders * LED headlights * Rear axle air suspension * 2 x keys with remote central locking Matching trailer and swap bodies available!!!! If you have questions, you can reach us during the day: Richard Kanwischer Phone and Whatsapp: (German and English) Kdsdpfswn Ahyox Afdok Paul: Phone and Whatsapp: (German, Russian, Ukrainian) Paul: Viber)

Condition: excellent (used), Weishaupt RGMS 40 dual fuel burner gas+heavy oil. 2600w Kdodomnqbtepfx Afdok

Condition: excellent (used), Collet chuck Collet chuck SK 40 DIN 69871 Tightening thread M 16 Collet type OZ-467 E length 140 mm 10 pieces with set 150 Euro Single delivery 15 Euro Kedslwqc Ejpfx Afdodk

Condition: used, New: Yes Kdedpsx I E Hrofx Afdok Colour: Grey

Condition: used, maximum load weight: 33,500 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 04/2019, loading space length: 13,400 mm, loading space width: 2,500 mm, loading space height: 2,700 mm, total width: 2,600 mm, total height: 4,000 mm, Year of construction: 2019, Refrigeration unit brand: Thermo King Additional information: * Unladen weight: 8,500 kg * Type | First axle: Continental R * Tire size | First axle: 385/55 R22.5 * Tire tread depth inner left | First axle: 50% * Tire tread depth inner right | First axle: 50% * Maximum axle load | First axle: 8,000 kg * Type | Second axle: Continental R * Type | Third axle: Continental R * Tire size | Second axle: 385/55 R22.5 * Tire size | Third axle: 385/55 R22.5 * Tire tread depth inner left | Second axle: 30% * Tire tread depth inner left | Third axle: 30% * Tire tread depth inner right | Second axle: 30% * Tire tread depth inner right | Third axle: 30% * Maximum axle load | Second axle: 8,000 kg * Maximum axle load | Third axle: 8,000 kg * Brake type | First axle: Disc brakes * Suspension | First axle: Air suspension * Brand | Third axle: Other * Brake type | Second axle: Disc brakes * Suspension | Second axle: Air suspension * Suspension | Third axle: Air suspension * Position | First axle: Rear * Brand | First axle: Other * Lift axle | First axle: Yes * Position | Second axle: Rear * Position | Third axle: Rear * Brand | Second axle: Other * Brake type | Third axle: Disc brakes Additional features: * Rear doors * Homepage * Lift axle * SemCollection * SemStars Ksdpsw Iuphjfx Afdedk Semtrade B.V. Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs | Please enquire in advance regarding the costs and procedures for your specific country Location | Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Disclaimer: Subject to change, prior sale, and errors excepted.

Condition: used, Year of construction: 2003, turning length: 630 mm, turning diameter: 850 mm, spindle bore: 130 mm, spindle speed (max.): 3,000 rpm, travel distance X-axis: 345 mm, travel distance Z-axis: 830 mm, Mori Seiki SL-403B/800 CNC Lathe (2003) Machine Type: CNC Turning Center (2-Axis) Year of Manufacture: 2003 Control System: Mori Seiki MSX-501II Maximum Turning Diameter: approx. 630 mm Maximum Turning Length: approx. 800 mm Distance Between Centers: approx. 850 mm X-Axis Travel: approx. 345 mm Z-Axis Travel: approx. 830 mm Spindle Nose: A2-11 Spindle Bore: approx. 130 mm Maximum Bar Capacity: approx. 102 mm Spindle Speed: up to 3,000 rpm Spindle Motor Power: approx. 30 / 37 kW Tool Turret: 12 Stations Tool Size: 25 × 25 mm Machine Weight: approx. 9500 kg Kdjdpfox Hp Eiex Afdok Machine Dimensions (L × W × H): approx. 4,200 × 2,000 × 2,100 mm

Condition: used, Year of construction: 2003, turning length: 630 mm, turning diameter: 850 mm, spindle bore: 130 mm, spindle speed (max.): 3,000 rpm, travel distance X-axis: 345 mm, travel distance Z-axis: 830 mm, Mori Seiki SL-403B/800 CNC Lathe (2003) Machine Type: CNC Turning Center (2-Axis) Year of Manufacture: 2003 Control System: Mori Seiki MSX-501II Maximum Turning Diameter: approx. 630 mm Maximum Turning Length: approx. 800 mm Distance Between Centers: approx. 850 mm X-Axis Travel: approx. 345 mm Z-Axis Travel: approx. 830 mm Spindle Nose: A2-11 Spindle Bore: approx. 130 mm Maximum Bar Capacity: approx. 102 mm Spindle Speed: up to 3,000 rpm Spindle Motor Power: approx. 30 / 37 kW Tool Turret: 12 Stations Tool Size: 25 × 25 mm Kedpfx Ajx Hp A Usfdsdk Machine Weight: approx. 9500 kg Machine Dimensions (L × W × H): approx. 4,200 × 2,000 × 2,100 mm

Condition: excellent (used), Weiss Model: WK11-1000/40 For sale is a professional Weiss Umwelttechnik WT-WK 1000/40 climate test chamber with fully automatic cold-regenerating adsorption dryer. The installed fixtures in the test chamber can be removed if required. Currently, due to these fixtures, the control cabinet is limited to a temperature range of −40°C to +60°C. Once the fixtures are removed, the manufacturer can expand the temperature range back to the standard values of −40°C to +180°C, as the fixtures are not suitable for these higher temperatures. This equipment is ideal for precise temperature and humidity testing on components, assemblies, and devices. It is perfectly suited for applications in industry, development, quality assurance, and research. Weiss Climate Test Chamber – Water Cooled Data for Temperature Tests: - Temperature range: −40°C to +60°C - Temporal temperature fluctuation (at center of usable space): ± 0.1 to ± 0.5 K - Spatial temperature deviation: ± 0.5 to ± 2.0 K - Temperature change rate: - Heating: 4 K/min - Cooling: 3 K/min Data for Climate Tests: - Temperature range: +10°C to +95°C - Humidity range: 10 to 98 % r. H. - Temporal temperature fluctuation (at center): ± 0.1 to ± 0.3 K - Spatial temperature deviation: ± 0.5 to ± 1 K - Temporal humidity fluctuation (at center): ± 1 to ± 3 % r. H. - Thermal compensation: - In the range of +25°C to +95°C - At a relative humidity of up to 90%, 500 W Humidification System Data: - Reservoir volume: 20 l - Water quality: demineralized - pH value: 6 to 7 - Conductivity: 5 to 20 μS/cm³ - Water consumption at constant +40°C, 92% r. H.: 21/24 h - Temperature gradient: - (according to IEC 60068-3-5): 1 to 2 K Test Chamber Dimensions: Height: 950 mm, Width: 1100 mm, Depth: 950 mm External Dimensions: Height: 1980 mm, Width: 1385 mm, Depth: 1850 mm Test Chamber Volume: approx. 990 liters Nominal Voltage: 3/N / PE AC 400 V +10% 50 Hz Nominal Power: 11.5 kW, Nominal Current: 22.0 A Refrigerant: R 404A Weight: 840 kg Kedsx Hxkzopfx Afdodk Important information for your safety as a buyer! The following steps are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If required, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See image) (Technical data subject to modifications and errors!) Further questions can be answered via telephone.

Condition: new, Siemens 6SL3126-1TE31-3AA3 Single Motor Module 132A, E-Stand: G, SN:T-R46286402, unused in opened original packaging, 100% functional, scope of delivery as per photos Kdsdjxahbajpfx Afdjk

Condition: ready for operation (used), Mazak tool changer for Mazak machine H 400 ,used, normal traces of use, 100% functional, scope of delivery according to photos Kdsdpfxsi Eb Dre Afdsk

Condition: new, Siemens 6SL3040-0JA01-0AA0 Control Unit SN T-L46316509, unused, in sealed original packaging, 100% functional, scope of delivery as per photos Kodpfjxag Swex Afdsdk

Condition: ready for operation (used), Mazak tool changer for Mazak machine H 400 ,used, normal traces of use, 100% functional, scope of delivery according to photos Kedpfx Afsi Eb Dnodsdk

Condition: ready for operation (used), Siemens 6SL3040-0NB00-0AA0 SINAMICS Numeric Control Extension NX15 Version: C SN:T-AD2081432, used, normal signs of use, 100% functional, scope of delivery as per photos Kdedpfxexag S De Afdok

Condition: new, Siemens 6SL3120-1TE21-0AD0 Single Motor Module SN T-PO6315406, unused, in sealed original packaging, 100% functional, scope of delivery as per photos Kdsdpfx Afjxag Tzsdek