Used External Quick Button for sale (11,994)

Condition: new, Year of construction: 2026, _____Standard Equipment / Technical Data Engine Rated Power (ISO) 68 / 90 kW / hp at 2200 rpm Max. Power 71 / 95 kW / hp at 2000 rpm Max. Torque 405 Nm at 1500 rpm Manufacturer / Type: Agco Power / AP 44MBTN-D5 Low-emission engine, 4 cylinders / 4.4l, 4V, STAGE 5 Controlled Turbocharger, SCR - Catalyst DOC - Diesel Oxidation Catalyst SCR Particulate Filter Catalyst Hood - single-piece, foldable Exhaust pipe on the right side in front of the cab Fuel tank capacity 198 liters / AdBlue 18 liters Transmission / PTO 16/16-speed Dyna-4, SpeedMatching, 40 km/h PowerControl operation on the left with load-sensing reversing gearbox, clutch operation, 4-stage load shifting with 1 lever, T-shuttle lever in the side console Partially automatic group shifting and Autotronic monitoring Permanently cooled wet disc clutches with independent lubrication system PTO: 540 / 540E / 1000, stub shaft 1 3/8", 6-spline Electrical engagement in the cab PTO START/STOP button on the rear, left fender Hydraulics / Lifting System Open Center system Quick coupler Cat. 2 Upper link control 4,300 daN maximum lifting force, 2 external lifting cylinders Adjustable lifting struts on both sides EHR with external control on both fenders Quick adjustable automatic drawbar coupling Electrical system Thermostart, 120 A alternator Power supply (12 Volt) for external devices with connector Axles / Additional Weights All-wheel drive front axle with switchable differential lock Rear axle ND with flange hub Oil-cooled disc brakes Front fender, width adjusted, rotatable Rear fender width 1.80 m, without extensions Front weight carrier with integrated drawbar and drawbar pin Hodpfx Aszpcvdenyeu Driver's Seat Vibration-damped standard cab with standard roof, ventilation and heating Integrated safety frame with tinted glazing Doors on both sides with safety steps Steering column adjustable in height and inclination Air-suspended driver's seat with armrests, swivel adapter, safety belt Exterior & wide-angle mirrors Interior mirror Analog-digital instrument panel (SIS) Radio preparation with antenna and speakers 4 work lights front and rear on the cab roof 2 driving lights in the hood and on the handrails, 2 work lights on the rear fenders Special Equipment: Fuel tank protection PowerControl & Brake on Neutral (clutch effect) 100 l/min, Open Center hydraulic system oil flow coupling (58+42 l/min) Front loader quick coupling system Leak oil collector on quick couplers 3 control valves: 1x MR, dw, EA, SST + 1x dw, NL, SST + 1x dw, NL, SST + free return 2.5t front lift, 1 hydraulic line set, electrical socket MF front loader preparation: foundation set, hydraulic set, electrical control via joystick, PTO: 540/540E, flanged, 6-spline, internal engagement Rear fender extensions - 100mm Tires 480/70R38 & 380/70R28 Air conditioning Cab with mechanical suspension Telescopic exterior & wide-angle mirrors Passenger seat with belt Air-suspended driver's seat, automatic adjustment with safety belt, swivel adapter and armrests Rear window wiper / washer system Without MF Connect (MF Telemetry System)

Condition: new, neu 080244 November 2026, Zwischenve Slowakei 26400 € 504.24 € 40 to 1500 mm X und Y Achse 100 mm 310 mm hydraulisch 38 l 6 kW 2000 mm 950 mm 1900 mm 1800 kg 420 mm 1 10 mm/s 12 mm/s Hodpfxjwiqnqs Anysu 40 mm/s 0.02 +/- mm 0.05 +/- mm 2 axes(Y andX) motorized backgauge with push button and manual fine adjustment with counter preselection of press depth Y and upper dead point intermediate piece with quick-release lever for upper tool clamping upper tool 1010/75/R0,8/105 1x835 mm + 1x835 mm divided die type2009/85° (V16/22/35/50 mm)1x835 mm + 1x835 mm divided 2 support arms according to CE rules oilfilling user manual in German

Condition: used, mileage: 206,496 km, power: 105 kW (142.76 HP), first registration: 07/2019, fuel type: diesel, overall weight: 3,500 kg, color: blue, gearing type: mechanical, emission class: euro6, loading space length: 4,300 mm, loading space width: 1,760 mm, loading space height: 1,920 mm, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Equipment: * Body/Superstructure: L3 High-roof box van, * Air conditioning, * Cargo Package (cargo area lining, wooden floor), * Rear door step, * Rear door (opening angle 180 degrees), * Fuel tank: main tank 93 liters, * Double passenger seat, * Comfort suspension seat, driver's side, * Steering wheel (steering column mechanically adjustable), Technology: * Multimedia system MBUX (7" touchscreen), * Navigation system for multimedia system MBUX, * Parking package with rear-view camera, * 3-button remote control for central locking, * Exterior mirrors electrically adjustable and heated, * Outside temperature display, Safety/Environment: * Airbag, driver's side, * Anti-slip regulation (ASR), * Brake assist, * Driver assistance system: crosswind assist, Other: * 1 previous owner, * German first delivery, * Engine 2.1 L - 105 kW CDI CAT, * Wheelbase 4325 mm, * Low emissions according to emission standard Euro 6, * Permissible total weight 3.50 t, * Vehicle was under a maintenance contract, * New inspection/emission test passed, * New service, Retrofitting of a tow hitch up to 3,500 kg is possible for an additional charge, vehicle has signs of wear and tear. Since 1972, your reliable partner for everything related to automobiles/commercial vehicles in 28832 Achim at the Bremen junction. Behnke Commercial Vehicle Center always has approximately 200 vehicles in the areas of vans, commercial vehicles and construction machinery ready for you! We offer you attractive financing options at favorable special conditions. If you are interested, we will gladly create an individual offer for you! We welcome the trade-in of your commercial vehicle/construction machine. If a new TÜV inspection is desired, we will gladly provide you with an offer from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection. Hjdpfxozx Ihwj Anysu The delivery of your "new" commercial vehicle is possible through our external partners for an additional charge. The information provided in advertisements, on the internet, on price tags and in pictures are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability/guarantee for typing and data transmission errors. Listed equipment may need to be checked separately. Errors and prior sale are subject to change.

Condition: used, Year of construction: 1980, machine/vehicle number: 17209, functionality: fully functional, power: 1.5 kW (2.04 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, spindle mount: MK 3, height adjustment type: mechanical, rotational speed (max.): 1,750 rpm, rotational speed (min.): 130 rpm, total height: 2,000 mm, throat depth: 290 mm, Equipment: rotational speed infinitely variable, Used column drill press Manufacturer: Alzmetall Type: AB 3 ESV Machine number: 17209 Year of manufacture: 1980 Drilling capacity in cast iron: Ø 35 mm Drilling capacity in steel (diameter): 28 mm Spindle speed via 2 gear stages, 2 motor speeds, and continuously variable via a variator gear 130 - 1750 rpm Spindle taper: MK 3 Hsdezldquspfx Anyou Feed rate: 0.1; 0.2; 0.3 manually/automatically mm/rev Distance spindle/table min/max: 80 - 680 mm Table clamping surface: 500 x 370 mm Table rotatable: 360° Drill table adjustment: 600 vertical mm Overhang: 290 mm Quill stroke: 165 mm Column diameter: Ø 120 mm Equipment: - Coolant system - Speed indicator - Work light - Röhm Spiro quick-change chuck 1-13 mm - Ejector on chain - Emergency stop button Machine weight approx.: 285 kg Machine dimensions approx.: 0.9 x 0.6 x 1.9 m (LxWxH)

Condition: used, Year of construction: 2015, functionality: fully functional, Model: OKUMA MULTUS U3000 2SW 1500 (CNC turning and milling center) Control: OKUMA OSP-P300S Turning length: approx. 1,500 mm Max. turning diameter: up to 650 mm Tool system / interface: HSK-A63 Main spindle: Drive power: 22 kW Torque: 427 Nm Max. speed: 5,000 rpm (2 gear stages) Spindle nose: Short taper size 6 Spindle front bearing: Ø 120 mm Spindle bore: Ø 80 mm 3. Counter spindle (Okuma motor spindle) Travel: Traversable on the W-axis Drive power: 22 kW Torque: 427 Nm Max. speed: 5,000 rpm Spindle nose: Short taper size 6 Spindle front bearing: Ø 100 mm Spindle bore: Ø 62 mm Tool spindle / Milling spindle (Okuma motor spindle) Drive power: 22 kW Torque: 120 Nm Max. speed: 12,000 rpm Tool holder: HSK-A63 Axes & Travel Ranges C-axis: 360° (Indexing / Positioning in 0.001° increments) Y-axis: Stroke +125 mm / -125 mm (Total stroke 250 mm) B-axis: 240° (Indexing / Positioning in 0.001° increments) Tool magazine & Turret Tool Magazine (ATC): 120 positions Lower turret: 12 stations with direct mounting system "radial" Turret guides: ZB-axis with cylindrical roller linear guide Hsdozu I U Aspfx Anysu XB-axis with slide guide Coolant supply / Internal coolant supply (ICS): max. 20 bar (including bag filter) External cooling for tool spindle: max. 8 bar Accessories: Short loader LNS Quick Load Seri O III

Condition: used, Year of construction: 2002, functionality: fully functional, Tapping Machine HAGEN & GOEBEL type HG-6 Hjdezxfbnspfx Anyeu Year of construction: 2002 Spindle travel: 50 mm External spindle cone: B12 Rotation: from 355 to 1800 RPM Rotation right / left Throat depth: 120 mm BILZ Quick Attach Voltage: 380 V Width: 400 mm Depth: 600 mm Total height: 800 mm Weight: approx 100 kg

Condition: used, mileage: 350 km, power: 125 kW (169.95 HP), first registration: 04/2026, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, Immediately available Lecapitain refrigerated box body: Payload: 950 kg Internal dimensions: Length: 3,336 mm Width: 1,915 mm Height: 1,950 mm Refrigeration system: THERMOKING cooling unit V 500x MAX 50 12 V incl. 230V standby cooling + heating Temperature recorder with printer Right side door 3D roof spoiler on cab Hedpfey Hbkwjx Anyou Rear-view camera and rear park assist Central locking system for the box Special features: 3-button remote control for central locking, rear towing eye, chassis: stabilization level II, vehicle without chassis lowering, vehicle without start/stop system, front cup holders, hold function, front engine PTO with mount for additional coolant compressor, programmable special module, LED High Performance headlamps, reinforced front axle Further equipment: Storage compartment above windscreen, storage compartment below dashboard passenger side, adaptive brake light, passenger airbag, driver airbag, acoustic package, hill-start assist, trailer hitch: wiring for trailer socket, exterior mirrors folding electrically, exterior mirrors electrically adjustable and heated, both sides, outside temperature display, DAB tuner (digital radio), automatic headlight activation, driver assistance system: active brake assist, driver assistance system: active lane keeping assist, driver assistance system: attention assist (drowsiness detection), driver assistance system: high beam assist, driver assistance system: intelligent speed assist, driver assistance system: breakdown management, driver assistance system: crosswind assist, 250 A alternator, external noise abatement package, automatic transmission GTronic (9-speed), body/build: standard platform, folding cover for stowage compartment, clamping bar for electrical connections (beneath driver’s seat), instrument cluster with color display, communications module (LTE) for digital services, fuel tank: main tank 93 ltr., radiator grille frame in vehicle colour, dashboard charging package (additional USB ports and 12V socket), steering wheel (mechanically adjustable steering column), multifunction steering wheel, truck approval, Mercedes-Benz emergency call system, engine 2.0 ltr. – 125 kW CDI CAT, MBUX multimedia system (10.25" touchscreen), wheelbase 3,665 mm, tire pressure monitoring system, low-emission according to Euro 6e, wipers with rain sensor, front mud flaps, Select, seat belt system with warning device (passenger side), seat belt system with warning device (driver side), seat configuration: comfort headrest, driver's seat, seat cover/upholstery: fabric, cabin seats: double passenger seat, cabin seats: comfort driver's seat, cabin seats: driver’s seat with lumbar support, USB connection (charging function only) center under dashboard, fleece battery 92 Ah, preparation for navigation system (for MBUX multimedia system), preparation for reversing camera with integrated display in interior mirror, pre-installation for Remote Service Plus, heat-insulating glazing (windscreen with upper band filter), gross vehicle weight 3.5 t, additional electric (air) heater, rain sensor

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2025, operating hours: 15 h, SCHORR RR200THX – Professional Wood Chipper for Branches up to 200 mm ✅ New & In Stock ✅ Shipping Available ✅ Self-Feeding The SCHORR RR200THX is a powerful drum wood chipper designed for professional use. It easily processes branches and trunk sections up to 200 mm in diameter and impresses with its robust construction, high throughput, and user-friendly operation. Equipped with a 25 HP petrol engine, this chipper delivers ample power for daily tasks in gardening, landscaping, and forestry. The electric start (e-starter) ensures comfortable and reliable startup—even in cold temperatures. The self-feeding cutting system, featuring 2 blades and 1 counter-blade made of hardened steel, guarantees a clean chipping result and consistent material flow. The large feed opening allows for quick and safe material input, even with heavily branched wood. The discharge chute is rotatable 360°, allowing you to direct the wood chips precisely—into piles, trailers, or big bags. Advantages - Self-feeding: No manual pushing required - E-starter: Convenient push-button starting - Robust cutting system: Hardened steel blades for long service life - Heavy-duty steel frame: Stable, torsion-resistant, and durable - 360° discharge chute: Flexible direction of chip output - Easy maintenance: Simple access to blades, filters, and oil - Mobile: Drawbar with parking brake for secure stationary placement and transport Technical Data Manufacturer: SCHORR Model: RR200THX Drive type: V-belt Max. branch thickness: 200 mm Chipping type: Drum, self-feeding Number of blades: 2 + 1 counter-blade Weight: 255 kg Overall length: 2819 mm Overall width: 1217 mm Overall height: 1550 mm Discharge chute angle: 360° Engine power: 19 kW / 25 HP Displacement: 764 cc Starting system: E-starter The RR200THX is built for long-term use. All components are easily accessible, allowing maintenance to be carried out quickly. Spare parts are available from stock at any time. Upon request, we offer technical service and repairs in our own workshop or directly at your site. Financing Hsdjzilarjpfx Anyeu Leasing or installment payment available—please contact us for details.

Condition: used, Year of construction: 1992, functionality: fully functional, Weiler Praktikant 160 B Lead and Draw Spindle Lathe, built in 1992, with a new 3-axis digital display from K&C, from a vocational training workshop! Technical data: >> Year of manufacture 1992, Machine No. 92-160-2994 Hsdpfxjzd Tyco Anyou >> Center height 160 mm >> Distance between centers 650 mm >> Spindle speeds: from 24 to 2500 rpm >> Spindle bore 40 mm >> Short taper spindle head, DIN 55027, size 5, with bayonet lock >> Tailstock, MK 3 >> Feeds from 0.02 to 0.63 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg >> Spindle brake, switchable >> Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and equipment: >> 3-axis digital display from K&C with operating manual Functions: Switching mm/inch, coordinate selection ABS/INC, halving of the display value, reference mark, tool programming 200 pieces, taper calculation, radius/diameter, quick zeros, switching of the counting direction >> 3-jaw chuck 160 mm with 1 set of jaws >> Tool clamping system with 2 steel holders >> Bed stop >> Centering point >> Coolant system >> Rear panel >> Machine feet >> Electronic spindle protection >> Operating manual Additional accessories such as collets, 4-jaw chucks, steady rests, and more are available at an extra charge. For safety: Electronic spindle protection, cover for the lead and draw spindle, 2 emergency stop buttons, spindle brake, electronic door protection for the change gears. About the machine: Offered is a Weiler Praktikant 160 B lead and draw spindle lathe in very good condition. All slides run smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and allows surfaces to be produced that are as smooth as if they had been ground. Take advantage of the opportunity to inspect this machine on-site while it is powered up and see its condition for yourself.

Condition: good (used), NATUS (Micromed) BrainQuick Mobile Video EEG System – SD PLUS Research Amplifier (48 channels) (used) This high-performance, 48-channel EEG system combines flexibility, signal quality, and ease of use in a compact, mobile solution. (Price is per unit) Key Features: SD PLUS™ Research Amplifier (48 channels) – Supports up to 40 common reference channels with multiple auxiliary inputs Exceptional Signal Integrity – High-resolution acquisition with a sampling rate of up to 16 kHz Optimized for Demanding Environments – suitable for technical evaluation, signal analysis development, training environments, spare parts recovery, and other non-clinical applications. Intuitive Interface – User-friendly layout with customizable toolbars for live and review modes Flexible Layout Options – Switch between study type and workflow stage, or centric views Integrated Data Management Hodpfozhicnsx Anyou Quick Editing Tools – Make fast adjustments without leaving the current screen The buyer is solely responsible for determining legal permissibility, regulatory status, technical suitability, installation requirements, maintenance requirements, user training requirements, and lawful intended use in the destination jurisdiction prior to purchase and prior to any use. The seller makes no representation that this equipment complies with Regulation (EU) 2017/745, is suitable for putting into clinical service, or is lawful for clinical deployment in any specific country.

Condition: new, *AVAILABLE IMMEDIATELY* Technical Data: • Brand: Brian James • Model: Race Transporter 7 • Vehicle type: Car transporter • Vehicle condition: New vehicle • First registration: None yet • Roadworthiness/Inspection (TÜV): 2 years from first registration • Internal dimensions (LxWxH): 600 x 235 x 199 cm • External dimensions (LxWxH): 770 x 255 x 264 cm • Loading floor height: 58 cm • Perm. gross weight: 3,500 kg • Payload: 2,069 kg • Chassis: High loader (wheels positioned underneath the structure) • Tyres: 195/55R10C • Suspension: ALKO rubber torsion axle • Jockey wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Body made from high-quality, glass fibre-reinforced plastic; lightweight yet extremely robust • Full-length daylight roof for optimal lighting inside • Manoeuvring handles front and rear • Dual front side locker doors for easy lashing of the front wheels • Dual rear side locker doors for easy lashing of the rear wheels • Large double wing side doors on left and right (direction of travel), lockable • Full-height and full-width electric rear ramp door • 2x foldable aluminium auxiliary ramps, 1.5 m, suitable for ultra-low vehicles • Rollers at the rear of the trailer • Internal height: 199 cm; rear entry height: 188 cm • Perforated lashing floor provides high slip resistance and is extremely wear-resistant, even under tough operating conditions • Numerous lashing points and a highly durable floor offer flexible securing options and excellent grip • Fully adjustable wheel stops with quick-release system, suitable for lowered vehicles • Closed composite floor panel with honeycomb-structured plastic core and surface layers on both sides: extremely light and rugged • 2x centrally recessed floor storage boxes, flush-mounted in the loading floor, ideal for storing heavy or bulky items; aluminium lids included • Electric winch, 12V with radio remote control, synthetic rope, and carabiner • Electro-hydraulic tilting of the loading platform, tiltable at the push of a button for an optimal loading angle • Central control unit for tilting function and rear ramp, in addition to remote control; includes board battery charge status display • Very sturdy welded steel frame • Frame fully hot-dip galvanized by immersion • Spare wheel with bracket mounted • Reinforced V-drawbar, extremely robust • ALKO overrun brake and parking brake • Automatic reverse function • Steel cast coupling head with integrated ALKO high-security lock • Plastic mudguards • 13-pin plug • LED interior lighting with LED strip • Reverse light • Large fully LED safety lighting • Side LED reverse lights • LED work lights at the rear for improved visibility when loading and unloading • Integrated rear fog light • Various marker lights—front, side, and rear • Anthracite aluminium alloy wheels • Heavy duty jockey wheel • 5-year chassis warranty • 4 wheel securing straps for lashing over wheels Optional accessories available – please enquire! New vehicle with warranty and roadworthiness certificate. We would be happy to offer you suitable financing! - Financing or leasing available - Nationwide delivery possible - All prices include VAT - Vehicle registration document pre-shipping possible or temporary number plates (Germany) can be provided - Export plates including customs declaration available Hedpfoydiibex Anyou - Errors, omissions, and prior sale excepted -

Condition: new, *IMMEDIATELY AVAILABLE* Equipment: - Aluminum side panels - V-shaped drawbar - 4 lashing eyes on the side edge Net: €857.14 / Gross: €1,020.00 Article number: HAS175201030.01 Technical data: • Brand: Humbaur • Model: Startrailer • Vehicle type: Box trailer • Vehicle condition: New • First registration: without first registration • TÜV/HU (technical inspection): 3 years from first registration • Internal dimensions (LxWxH): 205 x 109 x 30 cm • External dimensions (LxWxH): 297 x 154 x 80 cm • Loading height of the floor: 50 cm • Permissible total weight: 750 kg • Unladen weight: 136 kg • Payload: 614 kg • Chassis: Low-loader (wheels next to the body) • Tires: 145/80R13 • Suspension: ALKO rubber spring axle • Support wheel: Optional, can be retrofitted • 100 km/h approval: Yes DESCRIPTION • Aluminum side panels, anodized, double-walled • Screen-printed plywood floor, continuous without joints, non-slip and waterproof • Rear side panel foldable Hjdpfx Ajzy Da Eenyou • Front side panel fixed • Rear tailgate with tension closures • Continuous longitudinal beams • V-shaped drawbar • Safety cable for unbraked trailers • Plastic mudguards • Option to attach at all 4 corners for tarpaulin frames, grid attachments, side panel extensions or front wall extensions • Pre-mounted fastening buttons for tarpaulin attachment on the side panels • 4 tie-down rings on the inside of the side panels • Maintenance-free rubber spring axle from ALKO • 100 km/h manufacturer approval • 13-pin connector • Reversing light • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to request any specific requirements! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer license plates (Germany) can be provided. - Export license plates including customs declaration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Subject to errors, omissions and prior sale -

Condition: ready for operation (used), functionality: fully functional, Discover the LUTETIA T3 Churn, an essential piece of equipment to enhance your marinating processes and improve the quality of your meats. Its vacuum system accelerates flavor penetration while preserving the hydration of the ingredients. Furthermore, its stainless steel construction ensures optimal hygiene and quick maintenance. Furthermore, its custom-designed dimensions allow for seamless integration into different production facilities without the need for complex configurations. This gives you greater flexibility when you want to expand your product range. Hodov Uxatepfx Anyeu Then, the meat and brine capacity, estimated at 1,450 kg, is a real asset for processing large volumes without sacrificing mixing consistency. With this churn, you'll also reduce wasted time, as its user-friendly interface makes it easy to learn. Furthermore, its dynamic operation limits lump formation, enhancing the final presentation of your preparations. Finally, this robust machine can withstand high production rates and offers a long service life, even in an intensive environment. In addition, its airtight lid maintains a stable internal climate and prevents external contamination, a key factor in the food industry. Contact us now to discover how the LUTETIA T3 Churn can enhance your processing operations. You'll benefit from superior performance and precise recipe control, two essential elements for satisfying demanding customers. Technical specifications: Dimensions: L 2782 mm × W 1450 mm × H 2020 mm Capacity (meat + brine): ~1450 kg Operation: Vacuum-sealed for rapid marinating Structure: Stainless steel for enhanced hygiene Weight: ~1500 kg (estimated) for greater stability t7jlRcke

Condition: used, mileage: 86,000 km, power: 100 kW (135.96 HP), first registration: 05/2021, fuel type: diesel, overall weight: 2,800 kg, next inspection (TÜV): 08/2027, color: blue, gearing type: mechanical, emission class: euro6, number of seats: 2, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Special equipment: Audio navigation system Audio 40 (DAB+, Bluetooth, USB), Top Load equipment package, exterior mirrors electrically adjustable and heated, both sides, DAB tuner (digital radio reception), automatic activation of driving lights, wooden floor in cargo area, enlarged fuel tank, steering wheel (steering column mechanically adjustable), center console with storage compartment, reverse camera, windshield wipers with rain sensor, seat cover/upholstery: synthetic leather (driver's cab), seats in the driver's cab: adjustable passenger seat, driver's cab seats: comfort driver seat, trim in load/passenger compartment: standard, heat-insulating glazing, two-way speakers in the front Hedpfx Asy S Hg Isnyeu Additional features: 3-button remote control for central locking, 3rd brake light, adaptive brake light, passenger airbag, driver airbag, hill start assist (hill holder), exterior mirrors aspheric, both sides, external temperature display, mounting rails for roof rack, BlueEfficiency package, brake assist, braking system with ABS+ASR, ceiling light in cargo area, design and equipment line Base, driver assistance system: Attention Assist (drowsiness detection sensor), driver assistance system: breakdown management, driver assistance system: crosswind assist, windshield with integrated antenna, 185 A alternator, 6-speed manual transmission, cup holders rear, cup holders front, seatbelt pre-tensioner, grab handle passenger side, lockable glove compartment, body/build: standard van, body/build: compact, communication module (LTE) for digital services, full partition wall in cargo area, load securing / lashing eyes, Mercedes-Benz emergency call system, model update, engine 1.7L - 100 kW CDI CAT, rear fog light, wheelbase 3,200 mm, low-emission according to Euro 6d-TEMP standard, sliding door right side cargo-/passenger compartment, seatbelt system with warning device (driver/passenger side), window pillar trim, load/passenger compartment trim: hardboard half-height, lashing rails in cargo area - side wall on roof frame, fleece battery 92 Ah, ASSYST maintenance interval indicator, gross vehicle weight 2.80 t, rain sensor Financing possible Trade-ins possible Interim sale, errors and changes excepted

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Lattice side extension Equipment: - 6 lashing eyes - V-drawbar - Steel sheet body Net: €2,647.06 / Gross: €3,150.00 Article number: VF22202514340.11 Technical data: • Brand: Variant • Model: 2004 F2 • Vehicle type: Box trailer • Vehicle condition: New • Initial registration: Without initial registration • TÜV/HU (technical inspection): 2 years from initial registration • Internal dimensions (LxWxH): 255 x 145 x 90 cm • External dimensions (LxWxH): 395 x 192 x 145 cm • Loading height of the floor: 52 cm • Permissible total weight: 2,000 kg • Tare weight: 350 kg • Payload: 1,650 kg • Chassis: Low-loader (wheels beside the body) • Tires: 155/80R13 • Suspension: KNOTT rubber spring axle • Support wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Torsionally rigid longitudinal frame for safe driving characteristics • Zinc-coated steel sheet side walls • Option to insert at all 4 corners for tarpaulin frames, lattice side extensions, side wall extensions or front wall extensions • Rear side wall foldable • Made of multiple layers of glued screen printing plate, 15 mm, non-slip and waterproof • Maintenance-free rubber spring axles • Axle with continuous axle body and independent wheel suspension • 6 lashing eyes, recessed in the floor • Lever latch • Removable lattice side extension • Tarpaulin buttons for cargo net or flat tarpaulin • Overrun brake from Knott • Stable V-drawbar • Reverse automatic • KNOTT overrun device and parking brake • 13-pole plug • Reversing light • Large-sized safety lighting • Lighting recessed in the rear frame • Integrated rear fog light • 13-pole plug Hjdpfx Anozy Dcgjyou • Support wheel in the middle _____ Accessories can be retrofitted by our specialist workshop!! - Feel free to request specific features! _____ - Financing or leasing possible - Delivery throughout the country possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer plates (Germany) can be provided. - Export registration including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale are reserved -

Condition: good (used), Year of construction: 1999, MAKA HC 57 robot, for 5-axis machining Year of manufacture: 1999 Machine in gantry design with rack and pinion drive. Technical data: CNC control BWO 900C, for 5-axis machining. Integrated PC with 1 MB memory and 3.5" floppy disk drive. Mobile control panel. Machine table approx. 6,000 x approx. 1,270 mm. Working areas / machinable cube size with tool D 160 / length 160 mm: Y-axis: approx. 6,000 mm in 3-axis operation, approx. 5,700 mm in 5-axis operation X-axis: approx. 1,050 mm in 5-axis operation Z-axis: approx. 190 mm / travel approx. 420 mm A-axis: 540° B-axis: 360° (swivel axis +/- 180°) Rapid traverse speed X/Y-axis: 45 m/min. Hodpezwk Taefx Anysu Z-axis: 10 m/min. 1 universal head for 5-axis milling, with 50° angled head, power max. 12.5 kW, speed continuously variable, adjustable up to 17,000 rpm. Milling spindle liquid-cooled. Chip extraction system with slat curtain and suction nozzle for room air extraction for 5-axis operation and swiveling extraction for 3-axis operation. Tool interface ISO 40 for automatic tool changer system. 1 chain tool magazine with 24 spaces for tools up to D = 90 mm, with sorted storage up to max. 160 mm. (Three spaces are required for this). Machine table: 10 support tubes on linear guides with pneumatic release device for quick positioning. 2 control circuits for stops "Raise / Lower" 2 control circuits for e.g. sliding strip "Raise / Lower" 2 control circuits for pneumatics "Clamp / Release" 2 vacuum control circuits with button for clamping and automatic reset via CNC programming. 1 chip conveyor integrated in the table, for removing chips and small waste up to max. approx. 100 x 100 x 100 mm. Vacuum supply: 1 vacuum pump, including tank with 250 liter capacity for rapid vacuum build-up. Other: 10 vacuum supports with various suction cups. 4 clamping devices for posts / curved parts, with pneumatic clamping. 4 pneumatic stops Automatic central lubrication. Control cabinet with air conditioning unit. Work safety: Moving protective cabin with safety bumpers on the operator side. Any necessary safety measures for the rear of the machine must be provided by the customer. The machine can be inspected in working order in the southern Germany region, near the A81 highway / Black Forest.

Condition: new, width of the strips 150 mm band length 2000 mm band speed 14.5 + 29 m/sek grinding width 460 x 150 Plantisch mm Dust suction hood 100 mm total power requirement 4.0 kW 100% ED weight 84.0 kg range L-W-H 1080 x 520 x 1000 mm Standard with 2 speeds, ideal for grinding stainless steel Hedjxabf Espfx Anyou properties - Good sanding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous flat grinding surface for optimal grinding of long workpieces - Constant belt tension through spring-loaded tensioning device - Universally applicable for grinding edges, surfaces and for cylindrical grinding - Including quick-release system for quick strap changes - Simple adjustment of the parallel belt run by means of an adjusting screw - Graphite coating on the flat grinding surface increases the sliding properties of the Sanding belt scope of delivery - Sanding belt K 80 - Hinged protective screen - Sanding and support table - workpiece stop - Dust extraction nozzle - Separate off button - underframe

Condition: new, saw blade diameter 350 x 32 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 105 x 105 mm capacity 90 degrees: flat 180 x 70 mm capacity 45 degrees: round 120 / 110 mm capacity 45 degrees: square 100x100 / 95x95 mm capacity 45 degrees: flat 135 x 60 mm turning speeds 1700 / 3400 U/min Control MEP NC total power requirement 1.5 / 2.2 kW weight of the machine ca. 290 kg range L-W-H 1240 x 1360 x 1800 mm Features: - Semi-automatic high-performance circular saw * For cuts from 45° right to 45° left * In aluminum and light metal alloys - MEP microprocessor control * Simple user interface with display and mechanical buttons * Start and end positions of the saw head can be saved - Manually opened safety cover - Mechanical stops at -45°, +0°, and +45° * Enable quick positioning of the saw head - Pneumatic vise with quick-release clamp * Pneumatic clamping system allows adjustment of the clamping pressure * Depending on the hardness of the material to be cut * A pneumatic vertical vise is available as an option - Heavy-duty cast iron construction ensures . vibration-free operation and maximum precision - The saw head can also be tilted up to 45° - 2 sawing speeds - Base frame with lockable door - Pneumatic cooling and lubrication - Machine base frame Included in delivery: - Adjustable length stop 600 mm - Tool kit - Mounting adapter for feed roller conveyor including 1 support roller Hedpfxexaa Hns Anyeu - Tool kit - Detailed operating instructions, maintenance manual, etc. - Machine is delivered without a saw blade!

Condition: as good as new (ex-display), Year of construction: 2025, sheet width 1050 mm plate thickness 2.0 mm roll length 1070 mm roll diam. toproll 75.0 mm engine output 1.5 kW weight 325 kg range L-W-H 1530 x 700 x 1160 mm Exhibition machine - like NEW not yet in use (!!) Special price on request Hsdpfxjxacbuj Anyju Equipment: - electro-motor-driven 3-roller round bending machine - asymmetrical roller arrangement - 2x driven rollers using a brake motor - manual folding bearing for quick removal of the workpiece - wire insertion grooves on the bottom and rear rollers - double foot switch for R/L running including emergency stop button - rear roller feed with ratchet lever - electrical safety device

Condition: new, *IMMEDIATELY AVAILABLE* Includes: H-frame, railing Equipment: - Welded frame - 6 lashing points - H-frame at the front Net: €2,079.83 / Gross: €2,475.00 Article number: AZL113251337.01 Technical data: • Brand: Hapert Trailers • Model: Azure L-1 • Vehicle type: Box trailer • Vehicle condition: New vehicle • First registration: without first registration • TÜV/HU: 2 years from first registration • Internal dimensions (LxWxH): 250 x 130 x 37 cm • External dimensions (LxWxH): 382 x 178 x 132 cm • Loading height of the floor: 54 cm • Permissible total weight: 1,350 kg • Unladen weight: 330 kg • Payload: 1,020 kg • Chassis: Low loader (wheels next to the body) • Tires: 185R14C • Suspension: KNOTT rubber spring axle • Support wheel: Yes, automatic, 500 kg • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Aluminum side panels, anodized with profile channel on the outside • Accessories such as tarpaulin buttons, hooks, or ring eyes can be mounted with hammer-head screws without drilling. • Screen-printed wood floor, continuous without joints, non-slip, and waterproof • Rear tailgate made of aluminum in the proven Hapert design • Side panel retaining ropes on the rear tailgate • Hinges for the rear tailgate welded to the frame • Stable eccentric locks for the rear tailgate, recessed in the side panel profile • Very stable steel frame, welded • Frame completely hot-dip galvanized • Reinforced, stable, bolted V-drawbar • Steel fenders • Option to insert at all 4 corners for tarpaulin frames, lattice attachments, side panel attachments, or front wall extension • Many stable cross members, resulting in high point load capacity • Lateral side panel struts welded (increased lateral stability) • H-frame at the front, removable (front wall gallery) • Hole railing on three sides, 6 cm (Combi Protect Rail), also usable with locking bars and lashing straps - round holes 25 mm, elongated holes 54x25 mm • 6 lashing eyes recessed on the inside in the side edge (1000 DaN/kg), TÜV certified! • Maintenance-free rubber spring axle from KNOTT • Reversing automatic • KNOTT overrun device and parking brake • 13-pole plug • Reversing light • Large-dimensioned safety lighting • Integrated rear fog light • Lighting recessed in the rear frame Hsdszu N Rxepfx Anysu • Automatic support wheel in the center _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to ask about any specific requests! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance, or temporary registration plates (Germany) can be provided. - Export registration plates including customs registration possible Descriptions and images are subject to copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: used, Year of construction: 1992, gebraucht 1992 010190 prompt, Zwischenverkauf v 17900 € 1 Hodpfeyycwxjx Anysu 320 mm 650 mm 160 mm 40 mm 192 mm 205 mm 5 5 MK 16 48 - 2500 1/min 24 0.02 - 0.63 mm/U 0.006 - 0.2 mm/U 0.25 - 8 mm 0.2 - 4 150 mm 100 mm 40 mm 3 MK 85 mm 2,4 / 3 kW 1582 mm 715 mm 1245 mm 680 kg Heidenhain 3-axis digital readout NEWRöhm 3-jaw chuck, 160 mm diameter, with internal and external jaws Quick-change tool post with one rectangular insert and one round insert Quick-release collet chuck with various collets from 1 to 27 mm Live centre Drill chuck Chuck guard Lead and feed screw guard Motor brake Coolant system Mounting feet Operating instructions in German BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 222 h, load capacity: 4,100 kg, lifting height: 7,600 mm, fuel type: diesel, construction height: 2,420 mm, fork carriage width: 50 mm, empty load weight: 9,160 kg, drive type: Diesel, construction width: 2,390 mm, Telescopic handler, rigid frame Condition, technical: New Front tire size: TRELLEBORG - TH400 - 500/70 R24 164A8 Front tire condition: NEW Rear tire condition: NEW Rear work lights, front work lights, full cab, safety light, electrically heated rear-view mirrors, intelligent hydraulics, LED work lights, telescopic boom, Easy Connect System ECS, regenerative hydraulics, vibration damping, hydraulic quick-change system, tilt function shut-off, JSM LED, 4 additional work lights, LED work lights front and rear on the cab, 2x LED each, front road lighting, radio USB, Bluetooth with external microphone 100W, Safeview camera package x2 rear right side, automatic air conditioning, air-suspended textile low-frequency seat Grammer Pack Elite, automatic wheel alignment, 7-inch display, manual hand throttle, Eco - Stop, flow limiter, height-adjustable automatic trailer hitch, 40 mm pin, TÜV preparation, 40 km/h, Hedpowqtx Usfx Anyju electrical connection at the boom head, accessory kit, return line, trailer hitch completion kit, Easylink STD module, chocks, operating manual, compressed air system, central lubrication system.

Condition: new, bore capacity in steel (diameter) 25 mm bore stroke 120 mm MK 3 10 manuell 245 – 4.100 U/min manuell über Griffkreuz 300 x 270 mm 100 mm 250 mm 0,71 / 1,35 kW 0,23 t 700 x 500 x 1400 mm Bench drilling machine with V-belt drive and moveable intermediate table Max. thread cutting capacity for steel (St 60) M 18 - V-belt drive with 5x stepped pulleys and quick-release device - 10 fixed speeds - manual feed via grip cross - Scale with adjustable drilling depth Hjdpfx Asn Ea Tzsnyeu - automatic tool ejector - Movable intermediate table, fixed drill head - Machine base plate with machined workpiece support surface - integrated machine light - EMERGENCY STOP button - Right/left rotation switch - High/low speed switch - Chip protection device with microswitch monitoring - thermal magnetic motor protection - Switching electronics in the low-voltage range - Color signal gray (RAL 7004) and graphite black (RAL 9011) - CE conformity and marking - Documentation, operation and maintenance manual

Condition: new, saw blade diameter 355 mm Hodpfexabypox Anyeu capacity 90 degrees: round 130 mm capacity 90 degrees: square 125 x 125 mm capacity 90 degrees: flat 170 x 110 mm turning speeds 700 / 900 / 1100 / 1300 U/min mitre joint cuts -/+ degrees - 45 / + 0 total power requirement 3.5 kW weight of the machine ca. 25.0 kg Description: - mobile dry metal cutter - for use on a construction site, among other things - with brushless motor - particularly efficient, durable and maintenance-free - for burr-free sawing of profiles and pipes made of steel, iron, copper, brass, aluminum, plastics and composite materials without coolant - use e.g. in metal construction, in carpentry, for interior fitters, etc. - easy to transport - four speeds can be selected at the touch of a button - motor with soft start - digital display showing the selected speed . and current power in watts - angle adjustment 0° - 45° for miter cuts - vice with quick adjustment - large LED work light on the underside of the handle * to illuminate the work area - secure stand thanks to non-slip hard rubber feet - with spindle lock for quick saw blade changes - incl. 1x saw blade for steel 355x25.4x2.4mm Z66

Condition: like new (used), Year of construction: 2022, immediately available, warranty 12 months, excellent condition Hsdpfxjxbtvfo Anysu Forced convection oven for solvent-containing substances according to DIN EN 1539, 4 charging carts available on request (see image) - Max. temperature 150°C - Usable volume 1875 liters - Internal dimensions: W 1250 x D 1000 x H 1500 mm - External dimensions: W 1765 x D 1425 x H 2300 mm - Guide rails and recesses for loading the oven with a charging cart - Maximum permissible amount of flammable substances at 150°C: 83.9 g - Minimum exhaust air flow rate at 20°C: 360 m³/h - KS controller 40-1 for simple temperature control with defined ramp or hold times (1 program, 4 segments) - Controller upgrade to JUMO DICON available on request - Additionally, a simple timer is integrated, which can be started via front buttons - Connection: 30 kVA, 3 x 400 V, 57 A, 50 Hz - Heating power: 36 kW - Weight: 820 kg - Includes 4 charging carts, each with 12 trays and 24 insertion levels, available in stainless steel - Documentation, CE declaration - Electrically tested and with current DGUV test report Inspection in our warehouse by appointment. Oven, drying oven, baking oven, heating oven, industrial oven, solvent oven, paint drying oven, annealing oven, heating oven, temperature oven, drying cabinet, chamber oven, chamber dryer, sintering oven, convection drying cabinet, convection oven