Used Fabo Fixed Crusher 600–750 Tph for sale (22,511)

Condition: used, Shelf for bolt-together shelving, 1300 mm (W) x 600 mm (D), load capacity 230 kg, steel, silver-colored, galvanized. 2 pieces/carton. Itsdpsz Tn Uljfx Ag Asn * For universal use. * Base for customized shelving in combination with angle profiles. * Other technical features: Design: for bolt-together shelving.

Condition: used, Multimeter MM 5-2, 0.1 mV - 600 V AC/DC TRUE RMS, BENNING · With illuminated 4-digit LCD display (6000 counts) · Microampere measurement ranges (400.0 µA DC / 4000 µA DC) · Continuity test with red LED and buzzer · Diode test · Integrated voltage sensor signals phase voltages and cable breaks in lines without contact (visually) · Single-pole phase test · Automatic range selection · Automatic shut-off · Measurement value hold (HOLD), peak value memory (PMAX/PMIN), relative measurement (REL) · Measurement category CAT IV 300 V, CAT III 600 V · Measurement ranges: DC voltage: 100 µV - 600 V, AC voltage: 100 µV - 600 V. DC current: 0.1 µA - 10 A, AC current: 1 mA - 10 A, Resistance: 0.1 Ω - 40 MΩ. Frequency: 0.01 Hz - 50 kHz, Capacitance: 0.01 nF - 1 mF, Temperature: -40 °C to +400 °C · Other technical features: Width: 77 mm · Length: 150 mm Iedez Tptpjpfx Ag Astn · Height: 44 mm

Condition: used, Dump truck, capacity 600 liters, L1458 x W855 x H1099 mm, anthracite gray, without drain valve. · Tilting, bearing-mounted container made of 2 mm sheet steel · Top edge folded over twice · Spillage edge double-folded and welded to be oil-tight Itedpjz Th Sdsfx Ag Asn · Subframe made of 3 mm edge profiles, with integrated

Condition: used, Set of 2 swivel and 2 fixed casters, VG, load capacity 1350 kg, for containers with box-shaped hoppers Itodez Thu Sepfx Ag Aon · Casters, solid rubber tires · 2 swivel casters (one with brake) and 2 fixed casters · Wheel diameter 200 mm · Overall height 235 mm · Further technical characteristics: Design: 2 swivel and 2 fixed

Condition: used, Side cart, total load capacity 200 kg, 1 fixed and 2 tilting shelves with open frame, brilliant blue. · With open frame for holding Euro containers. Ijdpfx Agez Tqltj Ajtn · Steel tube and profile steel construction, powder-coated. · 2 swivel and 2 fixed casters, swivel casters with locking mechanism.

Condition: new, Year of construction: 2026, functionality: fully functional, working width 600mm two brush shafts two 4 kW motors smooth feed speed adjustment up/down shaft adjustment Iedpfx Ajz R Ncyeg Aotn 400V power supply 650 kg 2026, NEW

Condition: used, Year of construction: 2004, functionality: unexamined, We are offering this used Kjellberg FineFocus 600 plasma cutting machine, including a new torch and wear parts, manufactured in 2004. Isdpfozn Hiljx Ag Astn If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2013, operating hours: 10,326 h, functionality: fully functional, machine/vehicle number: +.1035, total height: 2,720 mm, total length: 3,160 mm, total width: 2,240 mm, overall weight: 4,800 kg, spindle speed (min.): 14,000 rpm, operating hours of spindle: 10,326 h, number of slots in tool magazine: 24, Equipment: chip conveyor, documentation/manual, Mikron VCE600Pro Excellent condition!! Year of manufacture: 2013 Spindle hours: 10,326 Control system: Heidenhain iTNC530 DXF file import Isdpfxez Saglj Ag Astn Handwheel Travel distances: X-axis: 600 / Y-axis: 500 / Z-axis: 540 Spindle: SK40 with 14,000 rpm 24-position tool changer Regulated spindle cooler IKZ internal cooling Band filter Air cooling through the spindle Spray ring for spindle ISO/BT 40 Direct measuring system / linear scales Tool - laser measurement Renishaw 3D probe Renishaw OMP40 Chip conveyor Top condition / without the vises shown in the pictures.

Condition: used, Weiss Type: WT1-600/70 Weiss Temperature Test Chamber, Water-Cooled Technical Data: Test chamber designation: WT1-600/70 External dimensions (without hinges and door closure) Height 1980 mm, Width 1085 mm, Depth 1655 mm Internal dimensions Height 950 mm, Width 800 mm, Depth 800 mm Ijdpfx Aozd R Sveg Aetn Test chamber volume: approx. 600 liters Cold/heat operation: -70 to 180°C Temperature change per unit of time Cooling: approx. 2.5 K/min Heating: approx. 4 K/min 3/N/PE AC 400V ±10% 50Hz Rated power: 9.1 kW Rated current: 19 A Permissible weight of test specimens Total load on the shelf supports: 80 kg Refrigerant: R 404A + R23 Weight: 600 kg For your safety as a buyer, please note the following information: The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), Year of construction: 2020, TESA Micro-Hite 600+M – Motorized Digital Height Gauge For sale: a professional TESA Micro-Hite 600+M digital height gauge, manufactured by the Swiss company TESA Technology, designed for precise dimensional measurements in metrology laboratories, quality control departments, and industrial plants. The device is equipped with an electronic control panel with a color display, a motorized measurement system, and a precise measuring probe. Technical specifications: * Manufacturer: TESA Technology – Switzerland * Model: Micro-Hite 600+M * Catalog number: 00730080 * Serial number: 1K2320 02 * Measurement range: 600 mm * Device type: digital height gauge * Drive: motorized * Reading system: digital * Measurement units: mm / inches * Control panel: color LCD display with keyboard * Factory calibration date visible on the plate: 17.12.2020 * Calibration certificate: no. 1K 3056 007 32 * Marking: CE Functions and measurement capabilities: * Precise measurement of component heights * Measurement of hole and shaft diameters * Measurement of distances between surfaces * Determination of center points * Differential and comparative measurements * Automatic movement of the measuring head * Storage of measurement results * Support for serial measurements * Measurement in metric and imperial units Equipment visible in the photos: * TESA Micro-Hite 600+M height gauge * Electronic control panel * Measuring probe Itsdpfx Aez Si Sqjg Aon * Granite measuring plate * Steel frame for the granite plate * Additional accessories and fixing elements visible in the photos

Condition: used, CTS Type: T-70/600 CTS Temperature Test Chamber, Water-Cooled Technical Performance Data: Temperature Operating Range Temperature range -70°C / +180°C Cooling rate 3.0 K/min Heating rate 3.5 K/min Temperature stability, time-related ≤± 0.3 K Dimensions: Test volume: 600 liters Test chamber dimensions: height, approx. 850 mm, width, approx. 850 mm, depth, approx. 830 mm External dimensions: height, approx. 1900 mm, width, approx. 1120 mm, depth, approx. 1875 mm Operating Data: Isdsziygyjpfx Ag Ajtn Electrical connection 400 V +6% -10%, 3/N, 50 Hz Connected load 8.2 kW, 14.2 A Refrigerant: R404A / R23 Weight: 600 kg For your security as a buyer, please note the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, Weiss Type: WT3-600/40 Weiss temperature testing chamber with S!MCON / 32 control system, water-cooled Control panel »Touchpanel« All control and operating commands can be initiated on the »Touchpanel« control panel by simply touching the function symbols. Adjustable feet To compensate for uneven floors and to ensure adequate ventilation of the machine, the testing chamber is equipped with adjustable feet. Feedthroughs The testing chamber is equipped with feedthroughs on the right and left sides. These allow measuring cables and testing equipment to be routed into the test chamber. Feedthroughs installed as standard R1: NW 125 mm L1: NW 50 mm (Refrigerant converted to R-452A) Test chamber volume: approx. 600 liters External dimensions with hinges and door lock Height 1995 mm, Width 1090 mm, Depth 1660 mm External dimensions without hinges and door lock Height 1995 mm, Width 1000 mm, Depth 1660 mm Internal dimensions: Height 950 mm, Width 800 mm, Depth 800 mm Data for temperature tests: Ijdpfxjziyb Rs Ag Aotn Temperature range: -42 to +180 °C Temporal temperature deviation in the center of the usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature change rate (according to IEC 60068-3-5) Heating: 4.0 K/min Cooling: 3.0 K/min Maximum heat compensation: 2500 W Data for operation: Test chamber lighting: Halogen bulb 2 x 24V, 50W Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: 15 A, Rated power 7.8 kW Fuse: 16 A slow-blow (supplied by customer) Sound pressure level approx. measured at a distance of 1 m from the front, 1 m height: 58 dB(A) Refrigerant: R-452A Weight: 620 kg For your safety as a buyer, the following information: The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, Weiss   Type: WT3-600/40   Weiss temperature test chamber with S!MCON / 32 control, air-cooled   (Refrigerant converted to R-452A)   Control panel: "Touchpanel" All control and operating commands can be initiated on the "Touchpanel" control panel by simply touching the function symbols.   Adjustable feet To compensate for uneven floors and to ensure adequate ventilation of the machine, the test chamber is equipped with adjustable feet.   Feedthroughs The test chamber is equipped with feedthroughs on the right and left sides. These allow measuring cables and testing equipment to be placed inside the test chamber.   Feedthrough installed as standard R1: 125 mm nominal diameter L1: 50 mm nominal diameter   Test chamber volume: approx. 600 liters   External dimensions with hinges and door latch Height 1995 mm, Width 1090 mm, Depth 1660 mm External dimensions without hinges and door latch Height 1995 mm, Width 1000 mm, Depth 1660 mm   Internal dimensions: Height 950 mm, Width 800 mm, Depth 800 mm   Data for temperature tests:   Temperature range: -42 to +180 °C Temperature deviation over time in the center of the usable space: ± 0.1 to ± 0.5 K Temperature deviation spatially: ± 0.5 to ± 1.5 K   Temperature change rate (according to IEC 60068-3-5) Heating: 4.0 K/min Cooling: 3.0 K/min Maximum heat compensation: 2500 W   Data for operation:   Test chamber lighting: Halogen bulb 2 x 24V, 50W Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated current: 15 A, Rated power 7.8 kW Fuse on customer side: 16 A, slow-blow   Sound pressure level approx. Measured at a distance of 1 m from the front, 1 m height: 61 dB(A)   Refrigerant: R-452A   Weight: 620 kg   For your safety as a buyer, here is the following information!   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers are subjected to a documented test run. Itodpfx Aszga Hujg Asn   Condition: used   Scope of delivery: (See picture)   (Changes and errors in the technical data and information are subject to change!)   We are happy to answer any further questions you may have by telephone.

Condition: ready for operation (used), Year of construction: 2016, stroke length: 350 mm, total width: 3,350 mm, total height: 5,500 mm, overall weight: 100,000 kg, product length (max.): 4,100 mm, Mechanical stamping press manufactured in 2016. This HIM HWAIL PRESS HCDS-600 features a press capacity of 600 tons and a stroke length of 350 mm. It includes a slide area of 2900 x 1300 mm and a bolster area of 3000 x 1400 mm. If you are looking to get high-quality stamping capabilities, consider the HIM HWAIL PRESS HCDS-600 machine we have for sale. Contact us for further details. • Press capacity: 600 ton • Rated tonnage point above B.D.C.: 7 mm • Number of strokes: 30 SPM • Stroke length: 350 mm • Die height: 600 mm • Slide adjustment: 120 mm • Slide area (L x W): 2900 x 1300 mm • Bolster area (L x W): 3000 x 1400 mm • Bolster thickness: 240 mm • Working height: 1300 mm • Side opening: 1450 x 750 mm • Main motor: AC 55 kW x 4 / VS 75 kW x 4 • Slide adjustment motor: 5.5 kW x 6 • Air pressure: 5 kg/cm² • Die cushion capacity: 16 x 2 ton • Die cushion stroke: 130 mm Itedpoz Sqf Rofx Ag Aon • Pad area (L x W): 1400 x 650 mm • Quantity available: 5 units • Pricing note: indicated price is per individual machine Additional equipment • Shuttle transfer robot/system • Included when purchasing the complete package of machines • Available separately at EUR 120,000 Technical Specification Stamping Force 6000 Kn

Condition: new, functionality: fully functional, Features of the system 1. Chain conveyor, 2.9 meters in length (other lengths available upon request) 2. Two custom-made forming shoulders with a fixed shape, adapted to the product dimensions 3. Single film loader + Automatic film centering device 4. End sealing unit, box motion, single sealing jaw 5. Robust, medium fin sealing structure 6. Eight servo-controlled drives 7. HMI control panel 8. Four individual temperature controllers 9. Housing made of stainless steel 304 10. Documentation in the local language 11. Print mark control 12. Bag length programmable 13. Standard running direction: left to right Technical parameters 1. Product length: L120-600mm 2. Product width: B70-250mm 3. Product height: H20-120mm 4. Packaging speed: up to 60 products/min (depending on product, bag length, and material) 5. Maximum film width: 600 mm 6. Connection voltage: 1 phase, 220V 50Hz 7. Total power consumption: approx. 8.8 kW 8. Machine weight: approx. 1100 kg 9. Machine dimensions: approx. 4500 x 1070 x 1590 mm Itodpfxsk Dz Hwj Ag Ajn

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, GEA KOPPENS PRF 600 PerFormer | Plate former for burgers, nuggets, and convenience food products Manufacturer: GEA Koppens / Convenience Food Systems (CFS) Model / Type: PRF 600 PerFormer Serial number: 712 Year of manufacture: 2001 Power supply: 400 V | 50 Hz | 3 Ph | 60 A Power: 30 kW Working width of the belt: 600 mm Isdpfozkv Nmex Ag Aetn Machine weight: 2850 kg The GEA Koppens PRF 600 PerFormer is a high-performance, industrial plate former designed for use in automated production lines in the meat, fish, convenience food, and vegetarian industries. This machine is an industry standard, dedicated to the precise shaping of products such as burgers, nuggets, meatballs, fish sticks, and cutlets. Thanks to its advanced raw material distribution system, the former guarantees perfect consistency in weight and preserves the fiber structure of the processed material. The core of the machine is a proven plate forming mechanism with a working width of 600 mm, which works in conjunction with a large loading hopper, enabling the achievement of the highest production rates required in industrial processing plants. The operation of the PerFormer former is characterized by minimal raw material loss and a uniform compaction level of the final product, which directly translates into optimized production costs.

Condition: used, Translation 4;1:1; Cable fitting: 4 mm - 41 m; 8 mm - 9 m. Iedpfxjz T H A Is Ag Astn

Condition: used, Description The SAT3-700PTH "TRIOMAT" is a powerful wood saw with a new design. The saw is equipped with a special carbide-tipped saw blade (700/30 x 6.0/4.5 mm, 72 teeth). It features a 5 m long, rigid conveyor belt, which enables a maximum discharge height of 3.0 m. New features include the double-acting hydraulic cylinder on the conveyor belt and the drive coupling with emergency stop for the saw blade. The saw blade drum has three channels and can process roundwood up to 199 mm in diameter and half-roundwood up to 304 mm in diameter. The cutting lengths are adjustable between 25 and 52 cm, with freely selectable intermediate stages and a maximum cutting speed of 45 cuts per minute. The cutting performance is approximately 7.5-10.5 cubic meters per hour (approx. 10.5 - 15 SRM). With a 9 cm³ pump, the machine weighs approximately 894 kg and has dimensions of L2680 x W1593 x H2307 mm. - New design - 5 m conveyor belt, rigid - NEW: Special carbide-tipped saw blade 700/30 x 6.0/4.5 mm, 72 teeth - Max. discharge height 3.0 m - NEW: Double-acting hydraulic cylinder on the conveyor belt - NEW: Drive coupling with emergency stop for the saw blade - 3 channels of the saw blade drum - Up to 199 mm diameter roundwood Itedjz T Iblspfx Ag Ajn - Up to 304 mm diameter half-roundwood - Cutting lengths 25-52 cm with freely adjustable intermediate stages - Adjustable cutting speed, max. 45 cuts/min - Cutting performance approx. 7.5-10.5 cubic meters/hour (approx. 10.5 - 15 SRM) - 9 cm³ pump - Dimensions with conveyor belt: L2680 x W1593 x H2307 mm

Condition: used, Slitting stand, cutting width 750 mm, dimensions 1120 x 850 x 1665 mm, stationary · Horizontal configuration with two slitting units, each with two interchangeable cassettes (rotary knives/blades) · Maximum total roll weight up to 130 kg Ijdpfx Agoz T Rrms Astn · Additional technical features: outlet height, continuously adjustable

Condition: used, Year of construction: 2010, overall weight: 16,000 kg, maximum load weight: 12,250 kg, empty load weight: 3,750 kg, loading space width: 2,490 mm, loading space length: 7,250 mm, loading space height: 2,400 mm, Equipment: cooling unit, GERMAN DEALER offers: BDF refrigerated box body Carrier 750 unit in working order 2 rows of lashing rails Baseboard protection strip Telescopic support legs 16,000 kg gross vehicle weight 3,750 kg unladen weight Year of manufacture: 11/2010 Interior dimensions: 7250x2490x2400 mm Many interchangeable platforms and chassis are in stock! ##### PLEASE CALL - NO EMAILS! ##### DELIVERY IS POSSIBLE THROUGHOUT GERMANY! MEPO COMMERCIAL VEHICLES HAS BEEN PROVIDING VEHICLES SINCE 1983! Iodpfx Aoz Tb Dysg Ajtn VIEWING ONLY BY APPOINTMENT! #####

Condition: used, lifting height: 5,000 mm, fuel type: diesel, mast type: duplex, fork length: 2,400 mm, General information Year of manufacture: 2002 Year of construction: 2002 Weights Empty weight: 16.100 kg Functional Lifting capacity: 12.000 kg Ijdpfez I A T Rjx Ag Aotn Maximum passing height: 395 cm Number of valves: 3 CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Mast type: duplex = Additional options and accessories = - 3rd valve - Closed cabin - Heater = Remarks = = Additional options and accessories = - 4th valve - Roof window = More information = Make of engine: Scania Number of valves: 3 Front tyre size: 315 / 80 R22,5 Fork carriage: Positioner and spread Please contact Bas Sindorf , ) for more information

Condition: used, Mobile scaffolding, Uni Stand.P2, working platform 750x2850mm, top height 10610mm, 2 kN/m², LAYHER · with safety railing P2, platforms at a vertical distance of 2 m · Aluminium · complies with EN 1004 (scaffolding group 3) · working area 750 x 2850 mm · permissible load Iedez T Rz Ijpfx Ag Aotn

Condition: used, Heavy-duty swivel caster, D.200mm, load capacity 1000kg, mounting plate L135xW110mm · Heavy-duty transport equipment caster · Fork made of sheet steel, zinc-chromated · Wheel axle screwed on · Wheel body made of plastic, tread made of plastic · Corrosion-resistant · Ball bearing · With plate mounting Isdpoz T Sp Tjfx Ag Aotn · Other technical features: Mounting type: with mounting plate

Condition: used, Lifting magnet Maxx, lifting capacity 600 kg, overall height 189 mm, with manual operation. · Manually operated Isdpfx Agoz Txkdo Aetn · Lifting capacity¹: 125 - 2000 kg · Compact and lightweight design, facilitates daily handling · Robust and reliable · Simple and safe lifting of ferromagnetic materials.

Condition: used, Energy-saving thanks to the use of IE2 motors Low wear due to very low compressor speed Low-noise operation and smooth running In the lower range of pressure tank sizes, up to 200 liters, they are available in either mobile or stationary versions. for mobile versions in the pressure tank range of 50 - 200 liters: • Check valve • Relief valve • Pressure gauge • Safety valve • Condor pressure switch • Quick-release coupling • Motor protection switch • Condensate drain valve • 3 m connection cable with plug for stationary compressors in the pressure tank range of 50 - 500 liters: • Check valve • Condor pressure switch • Safety valve • Ball valve 1/2" • Motor protection switch • Condensate drain valve • Pressure gauge • Vibration damper up to 4 kW motor power: • 3 m connection cable with plug • Relief valve from 5.5 kW motor power: • automatic star-delta starter for wall mounting • Solenoid valve with silencer Intake capacity l/min 625 Delivery rate l/min (at 7 bar) 470 Motor power kW 4.0 Rated voltage V/Hz 400/50 Compressor speed min 860 Itsdoz Tyk Espfx Ag Aon Max. pressure bar (gauge) 15 Tank capacity l 300 Stages 2 Weight kg 240 Dimensions l/w/h in mm 1,350/700/1,360