Used Feldbinder Tsa 30 Bitumen 30.000 Liter for sale (29,448)

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 30 mm -Dimensions: see photo technical drawing Ppsdpjzp Ey Ejfx Adwew -Overall dimensions: 135/90/H75 mm -Total weight: 4.5 kg

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws Podpfx Adszp Eylswspw -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 30 mm -Dimensions: see photo technical drawing -Overall dimensions: 135/90/H75 mm -Total weight: 4.3 kg

Year of construction: 2019, condition: excellent (used), Vötsch ClimeEvent C/340/70/5/S Climate Testing Chamber (Special Edition)!! Manufacturer: Vötsch Industrietechnik GmbH Type: ClimeEvent C/340/70/5/S Year of Manufacture: 2019 Machine Type: Climate Testing Chamber / Temperature and Humidity Testing Chamber Test Chamber Volume: approx. 340 liters Description For sale is a used Vötsch ClimeEvent C/340/70/5/S temperature and climate testing chamber from 2019. This unit is a rare special edition with three side-pull-out telescopic test drawers. The test specimens can be conveniently prepared and connected outside the test chamber and then inserted into the test chamber. This makes the system particularly suitable for series testing, development tasks, long-term tests, and applications with frequent sample changes. Each test drawer features a stainless steel grid basket and a separately lockable front with its own test specimen port. The three separate test levels allow for a clear arrangement of several test specimens or assemblies within a single test chamber. The system is equipped, among other things, with WEBSeason Touch control, temperature and humidity control, Donaldson compressed air treatment, and extensive documentation. The system is suitable for: Temperature tests Climate tests Environmental simulation Material testing Electronics testing Component testing Battery testing Sensor testing Quality assurance Research and development Aging and stress tests Technical Data Manufacturer: Vötsch Industrietechnik GmbH Type: ClimeEvent C/340/70/5/S Year of Manufacture: 2019 Test Chamber Volume: approx. 340 liters Temperature Range: approx. -70 °C to +180 °C Temperature Change Rate: approx. 5 K/min Max. Heat Compensation: approx. 3,000 W Temperature Deviation (time-dependent): ±0.1 to ±0.5 K Temperature Homogeneity (spatial): ±0.5 to ±1 K Temperature Gradient: ≤2 K Power Connection: 3/N/PE AC 400 V ±10% / 50 Hz Rated Power: 9 kW Rated Current: 20 A Refrigerant 1: R449A – 2.50 kg Refrigerant 2: R23 – 0.75 kg Ppjdpszp Nv Dsfx Adwew Max. Low Pressure: 21 bar(g) Max. High Pressure: 25 bar(g) Stand Pressure R23: 13 bar(g) Dimensions External Dimensions (H x W x D): approx. 1,800 x 895 x 1,810 mm Test Chamber Dimensions (H x W x D): approx. 750 x 580 x 765 mm Weight: approx. 650 kg Equipment WEBSeason Touch Panel Temperature and Humidity Control Stainless Steel Interior Large Observation Window 3 side-pull-out telescopic test drawers 3 stainless steel grid baskets Separately lockable drawers Heated drawer ports Test specimen ports Donaldson Ultrafilter for compressed air treatment Shipping Information External Dimensions (H x W x D): approx. 1,800 x 895 x 1,810 mm Weight: approx. 650 kg Condition Used The unit has been workshop-tested and subjected to a documented test run. The optical condition corresponds to the images. Scope of Supply Vötsch ClimeEvent C/340/70/5/S Climate Testing Chamber 3 telescopic test drawers 3 stainless steel grid baskets Donaldson Ultrafilter Accessories according to images Shipping or forwarding possible. Subject to change, errors and prior sale. We are happy to answer any further questions by telephone.

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws Ppsdpjzp Eupofx Adwsw -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 30 mm -Dimensions: see photo technical drawing -Overall dimensions: 135/90/H75 mm -Total weight: 4.4 kg

Condition: as good as new (ex-display), 7 pieces of guides suitable for the gang saw ESTERER HD 30 or EHD 30, absolutely as good as new because unused, 5 of the 7 guides are hollow body guides for cooling water flow Psdpeigqqhofx Adwjpw

Year of construction: 2018, condition: excellent (used), VÖTSCH ClimeEvent C/340/70/5/S Climate Test Chamber Manufacturer: Vötsch Industrietechnik GmbH Type: ClimeEvent C/340/70/5/S Year of Manufacture: 2018 Machine Type: Climate Test Chamber / Temperature and Humidity Test Chamber Test Chamber Volume: approx. 340 liters For sale is a used VÖTSCH ClimeEvent C/340/70/5/S climate and temperature test chamber with three side-mounted, telescopically extendable test drawers. The test chamber was developed for professional temperature, climate, humidity, aging, and stress tests and is ideal for testing laboratories, the automotive and electronics industries, research institutions, and quality assurance. Technical data: Model: ClimeEvent C/340/70/5/S Test chamber volume: approx. 340 liters Temperature range: approx. -70 °C to +180 °C Temperature change rate: approx. 5 K/min Power supply: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 9 kW Rated current: 20 A Refrigerant: R449A Refrigerant quantity R449A: 2.50 kg Additional refrigerant: R23 Refrigerant quantity R23: 0.75 kg Max. low pressure: 21 bar g Max. high pressure: 25 bar g Static pressure R23: 13 bar g Test drawers: 3 telescopically extendable test drawers Stainless steel grid baskets for holding test specimens Separately lockable, insulated drawer fronts Heated drawer openings Individual test levels accessible separately Suitable for holding several small components and assemblies Dimensions: External dimensions (H × W × D): approx. 1,800 × 895 × 1,810 mm Test chamber dimensions (H × W × D): approx. 750 × 580 × 765 mm Weight: approx. 650 kg Equipment: WEBSeason touch operating panel Digital measurement and control system Temperature and humidity control 3 telescopic test drawers Stainless steel grid inserts Observation window Side cable and test specimen openings Donaldson Ultrafilter compressed air treatment S!MPATI software license Calibration certificate Quality test certificate EU declaration of conformity Documentation / operating manual Accessories as shown in the pictures Application areas: Temperature testing Climate testing Humidity testing Environmental simulation Material testing Electronics and component testing Aging and stress testing Automotive industry Research and development Quality assurance Transport data: Transport dimensions (H × W × D): approx. 1,800 × 895 × 1,810 mm Electrical connection: 400 V / 50 Hz / 20 A Weight: approx. 650 kg Condition: Used Optical condition as shown in the pictures. Scope of delivery: VÖTSCH ClimeEvent C/340/70/5/S climate test chamber 3 telescopic test drawers with grid inserts Donaldson Ultrafilter S!MPATI software documents Calibration and quality documentation Operating manual / technical documentation Accessories as shown in the pictures Shipping or freight shipping possible. Scope of delivery as shown in the pictures. Ppjdpfx Aezp Inredwsw Subject to changes, errors and prior sale.

Condition: used, Year of construction: 1992, The WENZEL RS 30-12-15 CNC coordinate measuring machine (3D-CMM) is suitable for precise 3D measuring tasks in quality control, production metrology, and incoming goods inspection. It is equipped with a CNC control system and a Renishaw PH10 / TP20 probe system. The large measuring range of 3,000 x 2,000 x 1,500 mm (X/Y/Z) enables the measurement of large workpieces. Podozqc Hropfx Adwjpw The machine is ideal for use in tool, mold, and machine manufacturing, as well as in any application where highly precise coordinate measurements are required.

Condition: used, Year of construction: 2016, Overview This brew house was built in 2016 by Spanish manufacturer Prominox Villarobledo and has a wort volume of 30 hectoliters. Fermentation and storage cellars and various accessories are included. All the equipment has already been dismantled and stored. Scope of delivery  - Electrical panels for tanks and pumps - Stainless steel tank | model DFF99 | 2000 | 25,000 liters - Labeler | model MC-220 | 2016 | 1300 bph (up to 1.5 liters) - Filler | model AM DPS 811G | 2016 | 1200 bph (0.33 liters) - Sealer | model SK2 | 2016 | Semi-automatic box sealer, motor speed: 20 m/min, power: 0.13 hp Ppodpfstzg H Dox Adwow - 2x Horizontal tank | model AD MERKBLATTER | 2016 | Isobaric 3,000 liters - 2x Fermentation tank | 3,000 liters - 2x Fermentation tank | model PROMINOX | 2016 | 5,000 liters - Open tank - Low tank | model STORK TGSW - Filter | model PSF JB | 2017 - Grinder | model OOEHLER OL 6000 | 2016 - Silo and feeder - Resistance tank | model PROMINOX | 2016 | 3,000 liters - 2x Brewing/mashing tank | model PROMINOX | vertical | 2016 | 3,265 liters - Filter tank | model PROMINOX | 2016 | 4,500 liters - 2x Pump | model MIM GRUP FL31Cl - Pump | model CALPEDA MXH 204/A - Industrial scale | model GRAM MISSIL F2-60 - Pump | model LOWARA HTB 32-125/30 - Pump | model ABB INOX MIM GRUO FLUID-102 - Industrial sink - Refrigeration chamber - Pump | model PYD SH2-40 - Osmosis system | model HIDROTEC - Water treatment system - Cooling system | model AIRWELL AQVH,125BLN,R410A,BFC,1P | 2010 - Compressor | model INGERSOLL-RAND 11BAR | 2001 - Boiler | model ATTSU RL-400/12 - Forklift | model NICHIYU FB18PN-55-450 PS PL | 1999

Condition: ready for operation (used), Year of construction: 2001, pressure 135 t chamfer lenght 3050 mm distance between columns 2550 mm dayligth 320 - 560 mm stroke 240 mm Ppsdpfxex Ik D Ao Adwew working feed 10.0 mm/sec return speed 150 mm/sec column arm 400 mm work height max. 1050 mm control DNC 1200 PS/B operating pressure max. 297 bar compressed air 4.5 - 6.0 bar connected load 15.0 kW oil volume 250 ltr. weight 11500 kg range L-W-H 5240 x 2400 x 2900 mm good/well-Maintained conditions used in Aluminum processing - in checked conditions - machine Video - ?v=z-Bxibk_8uE Features: - CNC Electro-Hydraulic Press Brake - CYBELEC CNC Control Model DNC 1200 PS/B * Swiveling Control Panel, Front Right * Numerical Programming * Tool & Program Library - CNC Controlled Axes: Y1 + Y2 + X + R + CNC Crowning - CNC Electro-Motorized Backgauge (X-Axis) * with 3x Manually Adjustable Backgauge Fingers (Z-Axis) * Maximum Travel Speed: 250 mm/sec - CNC electro-motorized height adjustment from the backgauge (R-axis) * Maximum travel speed: 100 mm/sec. - CNC under-table crowning - CNC pneumatic die shifting (I-axis) - Pneumatic upper tool clamping - Pneumatic lower tool clamping - Rear safety guard, including swiveling door - 2x side safety guards - includes LAZER SAFE safety device - front - 2x stable front support arms with sliding system - original EHT split upper and lower tools - 1x freely movable 2-hand/foot control - Wiring diagram + hydraulic diagram

Condition: excellent (used), Vötsch VCS³ 7034-5 Climate Chamber / Temperature Chamber Manufacturer: Vötsch Industrietechnik GmbH Type: VCS³ 7034-5 Machine Type: Climate Chamber / Temperature Chamber Test chamber volume: approx. 335 liters For sale is a used Vötsch VCS³ 7034-5 climate chamber with water cooling and a temperature change rate of 5 K/min. The test chamber is suitable for professional temperature and climate tests, environmental simulation, material testing, quality assurance, electronics testing, as well as development and stress tests. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Type: VCS³ 7034-5 Test chamber volume: approx. 335 liters Temperature range: -70 °C to +180 °C Temperature change rate heating: approx. 7.0 K/min Temperature change rate cooling: approx. 6.7 K/min Temperature deviation over time: ±0.1 to ±0.5 K Temperature homogeneity spatially: ±0.5 to ±2.0 K Climate range: +10 °C to +95 °C Dew point range: +4 °C to +94 °C (extended to -3 °C, intermittently) Humidity range: 10 to 98 % RH Humidity deviation: ±1 to ±3 % RH Refrigerant: R404A / R-23 Refrigerant quantity: R404A 2.5 kg / R-23 0.75 kg Maximum system pressure (ND max.): 21 bar(g) Maximum head pressure (HD max.): 25 bar(g) Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 9 kW Rated current: 20 A On-site fuse: 63 A slow-blow Dimensions: External dimensions (W × D × H): approx. 870 × 1,700 × 1,775 mm Internal dimensions / test chamber (W × D × H): approx. 580 × 765 × 750 mm Weight: approx. 570 kg Equipment: S!MPAC control Touch panel operation Stainless steel interior Temperature and humidity control Ethernet interface USB interface Cable gland 50 mm Cable gland 125 mm Test specimen protection function Accessories as shown in the pictures Shipping data: Dimensions (W × D × H): approx. 870 × 1,700 × 1,775 mm Weight: approx. 570 kg Condition: Ppsdjzpihaspfx Adwew Used Optical condition as shown in the pictures. Scope of delivery: Vötsch VCS³ 7034-5 climate chamber Accessories as shown in the pictures Availability: by arrangement. Scope of delivery as shown in the pictures. Subject to change, errors and prior sale.

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 262, Year of construction: 2019, operating hours: 3,423 h, load capacity: 3,000 kg, lifting height: 5,190 mm, free lift: 1,600 mm, load center: 500 mm, fuel type: electric, mast type: triplex, construction height: 2,375 mm, remaining battery capacity: 100 %, battery voltage: 80 V, tire condition: 100 %, front tire type: cushion tires (black), rear tire type: cushion tires (black), Equipment: CE marking, UVV, cabin, lighting, seat heater, sideshift, STILL RX 60-30 Electric Forklift – Fully Refurbished with a NEW Battery and 12 Months Warranty Powerful. Reliable. Ready for immediate use. For sale is a high-quality STILL RX 60-30 electric forklift with extensive special equipment, high lift capacity, and a hydraulic fork positioner with telescopic forks. The vehicle has been professionally refurbished, is in very good technical and visual condition, and will be delivered with a new traction battery. Your advantages at a glance: ✅ Fully refurbished vehicle ✅ New 80 V traction battery ✅ 12 months warranty on the vehicle and the new battery ✅ Lifting height up to 5,190 mm ✅ Hydraulic side shifter with fork adjustment and telescopic forks ✅ Comfortable full cab with heating ✅ Extensive safety equipment ✅ Immediately available Technical data Manufacturer: STILL Type: RX 60-30 Load capacity: 3,000 kg Mast: Triplex free-lift mast with full free lift Lifting height: 5,190 mm Overall height: 2,375 mm Free lift: 1,600 mm Comfort and safety features The full cab with heating, air-suspended comfort seat including seat heating, and modern multi-lever control ensures comfortable working, even during long shifts. In addition, the vehicle has numerous safety features such as: LED work lights front and rear STILL SafetyLight 4PLUS FleetManager access system Shock detection Warning light when reversing Panoramic mirror Road traffic act (StVZO) compliant lighting Special highlight: Telescopic forks with fork adjustment The installed attachment enables hydraulic fork adjustment as well as extendable telescopic forks from 1,350 mm to 2,350 mm. This makes the vehicle ideal for loading and unloading trucks, handling various types of load carriers, and use in warehouse and production areas with changing requirements. Scope of delivery Fully refurbished STILL RX 60-30 New 80 V traction battery Charger Operating manual Ppodpfx Aozd Nyrsdwew 12 months warranty Selling price: €24,890.00 net plus transport costs An immediately operational premium electric forklift with high lift capacity, high-quality equipment, and a new battery. The ideal solution for companies that value reliability, efficiency, and high productivity. We will gladly prepare an individual offer for you, including transport to your location.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Kingsland HACO ERMS 30 – 100 CNC Pressbrake Model: ERMS 30 – 100 Year: 2006 Control: ATS 560 Capacity: 100 Ton x 3100mm Max. Bending Length: 3100mm Distance Between Columns: 2550mm Machine with: Pedpfx Adowwvx Dowepw Light Guards Full length top and bottom tooling

Condition: used, New: No Podpfxozn Iafo Adwspw Width: 250 cm Attachment suited for: Excavators

Condition: used, Year of construction: 2016, Transnorm angled inlet outlet rejector infeed conveyor 30°-1040-1080-1050 RA2518 Year of manufacture: 2016 discharge angle: 30° Nominal/external width (NB): 1080 mm Useful width (NUB): 1050 mm Conveyor speed: 1.0 m/s Roller diameter: 50 mm, steel rolls Drive: SEW Movimot Electrical data: 1,1 kW 50 Hz, 380V center distance: 75 mm Ppjdpfx Adozqa Nkjwow Height: 250 mm Straight section: 1040, 2900 to the tip of the angle Optionally available: Supports Length variation Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: good (used), Year of construction: 1980, machine/vehicle number: 622336, Offer 22681 Technical Data: - Drilling capacity in steel ST 60: 30 mm - Drill spindle mounting: MK 3 - Drill spindle stroke: 160 mm - 9 drill spindle speeds: 90 - 1450 rpm - Overhang: 300 mm Ppedezp E Ucopfx Adwsw - Table with 2 T-slots - Table dimensions: 400 x 450 mm - Max. distance table - drill spindle: 660 mm - Height adjustable via rack and pinion with hand crank - Drive: 400 V / 1.2 kW - Space requirement: approx. W 600 x H 2100 x D 850 mm - Weight: approx. 300 kg - Including: - Drill chuck - 10 HSS drill bits, 8 – 20 mm

Condition: used, Year of construction: 2020, _____KTS 30 Special / Crane-Manure Tank Saddle Trailer, 3-axle, 30 cbm tank capacity - V2A stainless steel tank, DIN 1.4301, manufactured in-house - Nova-Gray powder-coated frame - Tank diameter 2200 mm - Manhole at the rear - 3 baffle plates specially welded - Rinsing system for stirring the contents - 2 x hose storage, aluminum - Tire size 385/65 R 22.5 - 3 axles, SAF with air suspension - ABS - EBS - Disc brakes with special off-road protection - Wabco braking system with spring brake accumulator and parking brake - 1st axle as a lift axle with starting aid - 2nd axle rigid - 3rd axle trailing steering axle with automatic locking from 30 km/h and when reversing - Automatic filling shut-off via float and indicator at the front - Free filling and venting - 6 x polyethylene fenders - 2 x LED work lights at the rear - Aluminum support legs - Underrun protection with truck tail lights - 1 x lockable storage box on the left, water tank with soap dispenser for hand washing on the right - Document holder - Ge-Ka couplings for filling at the suction arm - Compressed air discharge at the suction arm for suction hose - TÜV inspection - Surcharge for tank with 31.7 cbm - KTS surcharge for 31.7 cbm tank instead of 30.0 cbm (longer chassis required) - All KTSPROFI package, KTS 30 light - Simplest operation by pressing a button - Fully automatic interlocking of the tank ventilation valves - No possibility of incorrect operation - With overpressure and underpressure valves - Ventilation valve and suction valve as pneumatic flat gate valves - Main control panel at the rear left in a stainless steel housing with laser-engraved control panel - Additional control panel at the front left, level indicator at the rear with cover - Automatic pump shut-off when full - Pump Vogelsang 6 cbm KTS 30 - Vogelsang rotary lobe pump VX 186-260, 6,000 liters / min. - Injection system and interchangeable housings - Docking funnel at the top, 8 inches with knife gate valve (KTS) - with pneumatic actuation (flat gate valve) for all vehicles - Pump mounting parts in stainless steel 1.4301 - instead of galvanized version - Flat gate valve under the tank, KTS 30 - Flat gate valve under the tank for discharging with KTS 30 (MANDATORY !! for KTS docking funnel at the bottom and if there is the possibility of transferring liquid) - Overflow tank, KTS - made of stainless steel with swivel flap and drain valve - Additional LED headlight at the front (2 pieces) - 2 LED spotlights at the front, mounted under the hose trays on the right and left - Transfer crane 6" KTS short - Transfer crane in 6" up/down, right/left, approx. 6 m long. Only for emptying! - Slide dome cover 600 KTS 30 - Slide dome cover 600 pneumatic for KTS 30 - Storage location: BNP PARIBAS LEASE GR Psdpfx Adszpgriowjpw

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 230 V, type of input current: AC, laser power: 30 W, type of cooling: air, total width: 800 mm, total height: 2,000 mm, total length: 900 mm, overall weight: 120 kg, warranty duration: 12 months, height adjustment type: electric, door opening width: 700 mm, door opening height: 340 mm, scan area length: 150 mm, scan area width: 150 mm, input current: 16 A, space requirement width: 800 mm, laser wavelength: 1,064 nm, working height: 900 mm, space requirement length: 900 mm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, input frequency: 50 Hz, laser type: fiber laser, Equipment: fume extraction, The universal laser marking system LAS 28 XL from Systemtechnik Hölzer GmbH can be used for a very wide range of marking applications. With the integrated fibre laser, you can mark almost all materials such as steel, hard metal, aluminium and plastics. Depending on the requirements, the system can be equipped with a 20, 30 or 50 watt fibre laser. For permanent marking, the use of the laser is necessary in many industries. With the powerful laser software, texts, numbers, 2D codes, QR codes and logos can be realised with just a few clicks and without extensive programming knowledge. The software automatically counts up serial and article numbers after prior setting. In addition, the software can read data (variable information such as drawing numbers, project designations, etc.) from existing tables and automatically transfer them to predefined areas. The use of a hand scanner is also possible. Ppsdoywg Sbepfx Adwew Bk3ky883 The standard equipment includes a laptop incl. holder with Windows operating system and laser software. Optionally, the laser model LAS 28 XL can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extension arms for marking long parts, movable Z-axis, drawer systems, etc., can be realised. Made in Germany Fiber laser 30W, 20 W or 50 Watt - Laser class 1 - Wavelength 1064nm - Marking field size 150x150mm (optionally larger) - marking software EZCAD in German / English - signal light for indication of operating status - optional: rotary axis (3-jaw chuck) - optional: digital height measuring system - optional: exhaust system (incl. activated carbon filter) - optional: outrigger for large components (one-sided, both-sided) - pilot laser (simple preview, contour preview) - focus finder (simple focus adjustment) - max. component height approx. 300mm - electrically adjustable Z-axis - Laptop incl. holder with Windows operating system - frame made of aluminum profile - air cooled - Door width approx. 700mm / door height(pass-through): approx. 400mm - Connection 230V - Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) - Weight: approx. 100 Kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, 1x Bartels SK 30 R tilting container, tipper, tipping container, chip container, chip cart, tilting container, bucket, container 8 units available!!!! Capacity approx. 300L Payload 1000KG Podpfx Adjzb Awyswopw Dimensions approx. 120x84x100cm Please refer to the last image for further details. Very good condition, see pictures. Forklift available for loading. Collection only by appointment in 75053 Gondelsheim. Shipping via freight forwarder is possible, please inquire with your postal code.

Condition: good (used), machine/vehicle number: 17258, Year of construction: 2019, operating hours: 5,288 h, load capacity: 3,000 kg, lifting height: 220 mm, fuel type: electric, mast type: other, construction height: 1,360 mm, battery voltage: 24 V, fork length: 1,150 mm, 5227946 Ppodpfxezp T R Eo Adwew Serial Number: W40184V00213 Battery Details: 24V Lithium 205Ah

Condition: good (used), machine/vehicle number: 17257, Year of construction: 2019, operating hours: 6,300 h, load capacity: 3,000 kg, lifting height: 220 mm, fuel type: electric, mast type: other, construction height: 1,360 mm, battery voltage: 24 V, fork length: 1,150 mm, 5227944 Serial Number: W40184V00212 Ppedpfx Ajzp T Rrsdwsw Battery Details: 24V Lithium 205Ah BJ: 2021

Condition: used, machine/vehicle number: 17086, Year of construction: 2019, operating hours: 572 h, load capacity: 336 kg, lifting height: 3,000 mm, fuel type: electric, mast type: other, construction height: 1,360 mm, battery voltage: 24 V, overall weight: 800 kg, 5145468 Podpfszfd Tijx Adwjpw Serial Number: 2281300062 Battery Details: 24 Volt NEU!!! (05.2026)

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 170.012.100, Brand new Holmatro hydraulic shears. Perfect for auto recyclers, for cutting catalytic converters, etc. The shears are brand new, manufactured in 2024, but have never been used. Includes a complete service kit. Ppjdpfszcyrwox Adwjw

Condition: new, Year of construction: 2023, functionality: fully functional, working width: 430 mm, area performance: 1,160 m²/h, overall weight: 127 kg, tank capacity: 30 l, total height: 1,020 mm, total width: 560 mm, total length: 1,210 mm, water tank capacity: 30 l, battery voltage: 24 V, gradeability: 2 %, TECHNICAL SPECIFICATIONS FEATURES Working width (cleaning) mm 430 Working width (vacuuming) mm 650 Area performance/hour (theoretical - practical) m²/h 1720 - 1030 Power supply Battery 24V Power consumption W 600 Drive type Manual IP rating IPX3 BATTERIES Type Gel battery set (2 units) 12V 50Ah (*) Battery life h - min 1 h and 30 min Dimensions battery compartment x quantity mm x no. 340x340x240 X 1 BRUSHES Diameter pad x quantity mm - inch x no. 430 - 17” x 1 Motor power x quantity W x no. 200 x 1 Motor speed rpm 120 Weight (head) - specific pressure Kg - g/cm² 18 - 17.4 TRACTION Motor power W --- Maximum travel speed Km/h 4 Pjdpfxezpxm So Adwjpw Climbing ability at full load % 2 VACUUMING Motor power W 400 Vacuum (water column) mbar - mmH2O 1189 Airflow rate l/s 28 Noise level dB(A) 64 TANK Type Double tank Capacity (cleaning solution) l 30 Capacity (dirty water tank) l 33 Weight (without/with batteries) Kg 66 / 104 Dimensions mm 1210x560x1020

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 9 h, load capacity: 3,000 kg, lifting height: 4,000 mm, free lift: 130 mm, fuel type: diesel, mast type: duplex, construction height: 2,600 mm, fork length: 2,400 mm, drive type: Diesel, Diesel forklift Load center: 500 Ppodpfx Asvla S Sjdwsw ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Duplex Technical condition: New Front tire type: Superelastic Front tire size: 28X9-15 Rear tire type: Superelastic Rear tire size: 6.50-10 Fork positioner, 3rd valve, 4th valve, front work light, roof protection, soot filter, full cabin, CE certificate, safety light. Image serves as a symbolic representation.

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 475 h, load capacity: 336 kg, lifting height: 3,000 mm, fuel type: electric, drive type: Elektro, High-lift order picker Mast type: None Technical condition: good Battery condition: 80 - 100% CE Certificate, Pjdpfxsvg Tlbe Adwopw