Used Filling System for sale (43,026)

Condition: used, machine/vehicle number: 007802, Max. panel width: 800 mm Max. panel length: 2000 mm Length of conveyor: 8320 mm Introduction system: with grippers Kodpfxsxn Nf Ne Ag Aonc

Condition: used, machine/vehicle number: 007723, Max. panel width: 900 mm Knjdoy Nkyyopfx Ag Ajc Length of conveyor: 11000 mm Introduction system: with pushers

Condition: excellent (used), Year of construction: 2019, Clean air filter (filter class M, filter bags, i.e. suitable for fine dust) Technical data: Motor power: 7.5 kW / 3-phase / 400 V / 50 Hz Intake nozzle diameter: 300 mm Max. volume flow: 5,750 m3/h Negative pressure at rated flow: 3,100 Pa Filter area: 30.0 m2 Number of filters: 60 pcs Compressed air cleaning Incl. integrated pre-separator Incl. integrated extinguishing system (connection to the water supply) Chip collection volume: 3 x 250 l Sound pressure level: 75 dB(A) Incl. dust baffle Incl. CE & all documents Dimensions L x W x H = 3435 x 1100 x 2440 mm Weight 850 kg Note regarding used machines: Kjdpfxe Aazbwj Ag Aenc • Subject to errors in technical data and prior sale. • Indicated prices are ex-works prices, collection only - free loading! • The machine has been cleaned and function-tested. • All machines are sold as seen, without any warranty claims. The buyer is free to inspect the machine on site. • Special agreements are only possible in written form. (We will only answer inquiries if you provide your address + telephone number!)

Condition: used, Year of construction: 1999, Offered for sale is a vertical form-fill-seal machine with dosing and filling unit. Control system: HASSIA REDATRON machine control system without LCD display, membrane keypad, recipe memory, parameter management and emergency stop switch. Equipped with stainless steel product container, conical dosing hopper, pneumatically operated dosing unit, film roll holder, film guide, forming collar, vertical film forming, sealing unit and transparent protective enclosure. Inspection possible by arrangement. Kedsz N Ha Eopfx Ag Ajnc

Year of construction: 2016, condition: used, Gas supply: natural gas from the public gas network, gas treatment: drying using a molecular sieve, max. refueling pressure: 300bar(g), natural gas compressor station capacity: 630m³, storage type: SP28, storage pressure: 300bar(g), inlet pressure: 2.5-700mbar(g), storage type: SP28, storage volume: 2.24m³, storage pressure: ≤300bar(g), compressed air/gas supply (Pₛ,in/Pₛ,out,EGT): 1bar(g)/300bar(g), temperature range: -10 to 50°C/-10 to 60°C, volume flow rate: 74-113Nm³/h, power consumption: 36kW, noise level: 65dB(A) at a distance of 1m, length: 4,850mm, width: 2,690mm, height: 3,100mm, weight: approx. 30t, including documentation. Knsdjz R A Nxopfx Ag Aoc

Year of construction: 2001, condition: used, Water consumption per cycle: 35/40l, electrical connection: 36A, connected load: 22.5kW, length: 640mm, width: 640mm, height: 640/1000mm, an on-site inspection is possible. Knodpfsz S Ivtsx Ag Ajc

Condition: used, Year of construction: 2009, A filling machine with packer is available, 1) Filling machine Shikoku Kakoki S-PS65UC, compressed air connection: 588-882kPa, compressed air consumption: 1,300Nl/min, electrical connection: 148A, operating hours: 56,823h, suitable for milk, yogurt, fruit yogurt and similar products, 2) Packaging machine Tetra Pak TETRA CARDBOARD PACKER 70, wrap-around carton formats: 250, 500, 1000ml, year of manufacture: 2004, an on-site inspection is possible. Kedpfxjz S Ivye Ag Aonc

Condition: good (used), Year of construction: 2007, functionality: fully functional,

Condition: used, Pipe cutting system with optical laser marking detection The FZH Vario Flex is a fully automated pipe cutting system. It is specifically designed for the precise and reliable cutting of stainless steel pipes (e.g., for fuel, brake, air conditioning, or hydraulic lines). The system features optical laser marking detection. The control panel allows the user to select whether the cut is triggered mechanically (e.g., at the back of a union nut) or fully automatically via the optical detection of a laser marking applied to the pipe. Thanks to the integrated rotating 3-jaw cutting head and a micro-spraying unit (minimum quantity lubrication), the process is extremely gentle on the tooling. The pipes remain almost completely dry and free from major contamination. The entire process, from loading to clamping, cutting, and unloading, is highly automated and carried out in a material-saving cycle. Fully integrated labeling & traceability system: The system is designed for modern quality standards (Industry 4.0 / Automotive). After the cutting process, the barcode label is automatically generated, assigned, and printed for complete part traceability (traceability & system logging are directly integrated). Thanks to two separate box output stations (rear-side airlocks with sliding doors), the system automatically switches to the second station when the first box is full. The removal of the finished KLT boxes takes place in parallel with the main processing time without stopping the machine. Advantages of the Vario cutting head series compared to conventional cutting methods Shortest setup times in non-cutting separation Material-saving and free from contamination Chip-free Easy to maintain No coolant or lubricant required Short processing times Cuts all common materials Can be combined with common pipe magazines or from a coil Special designs possible Technical data & capacities Maximum pipe length (feed): 1,000 mm Material specification: Optimized for stainless steel pipes (also with pre-assembled union nuts or crimps) Sensors & positioning: Optical sensors for automatic detection of laser markings on the workpiece Feeding system: Automatic drum magazine / vertical disc feeder (for manual or automatic loading) Length adjustment: Manually adjustable to different pipe lengths by means of a mechanical handwheel Cutting method: Chip-removing sawing / Rotating cutting head with three-jaw clamping and cutting mechanism (up to 600 rpm) Coolant system: Integrated micro-spraying unit (MMS) for minimum quantity lubrication Control: Siemens SIMATIC HMI industrial PC with TFT monitor, keyboard, and mouse Setup operation: Mobile Siemens teach-in terminal for manual axis configuration and position storage Integrated labeling and barcode printing system Enclosure: Aluminum profile system with safety Makrolon panes Logistics / Output Ksdpfx Agezw Ukce Ajnc Integrated box unloading station 2 separate box output stations for rear-side removal via protected airlock systems with sliding doors Suitable for standardized KLT containers (600x400 mm and 400x300 mm) Manufacturer: FZH Engineering GmbH Type / Platform: Vario Flex Year of construction: 2017 Material: Stainless steel Cutting head: Vario flex Special features: Pipes with union nuts Diameter Ø 6-76 mm Output length L = 150-1,000 mm Separation based on laser marking Wall thicknesses: 1 to 1.3 mm Condition: The system is in good optical and mechanical condition.

Condition: used, Zippel Crankshaft Cleaning System Zippel Kodpfxoihfn Io Ag Ajnc Crankshaft Cleaning System L x W x H = 3520 x 520 x 700 mm You can find other cleaning systems in various sizes – new and used – in our shop! International shipping costs available upon request!

Year of construction: 2007, condition: ready for operation (used), functionality: fully functional, For sale is our Fisa 3-chamber cleaning system for aluminum die-casting tools. The sale includes the associated ABUS crane, as shown in the picture. Plus, there are 2 full containers of cleaning agent. Knedpez Rpnnofx Ag Aec

Condition: used, ManuMatik / KraussMaffei High-Pressure Cylinder These high-pressure cylinders come from a commutator press and were in use there until the very end. Overall height: 184 cm Cylinder height: 150 cm Kodpfxohtyxlj Ag Aenc Rod circumference: 28 cm Diameter: 8.90 cm The following components are included: Check valves z2s16-1-51 Pressure reducing valve Zdr 6 dp0-45/40ym w80 Scope of delivery: 1 x press unit Complete factory closure, large selection of storage platforms, pallet racking, shelving systems, paternoster lifts. High-quality industrial machines, lathes, grinding machines, hand tools. More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: used, Prince Technologies PrinCe 560 Capillary Zone Electrophoresis System Connections: Power supply, HV control, parallel connection A, parallel connection B, serial connection A (RS232), serial connection B (RS232). Technical Data: Injection method: Up to 650 min, in 0.01 min steps; Hydrodynamics: 180 - 250 mbar, in 1 mbar steps, Electrokinetics: -30 to +30 kV, current and/or voltage. Flow/Pressure range: 0 to +3000 mbar from DCI device. Knjdpfx Aeu Eb D Hog Aec Voltage range: -30 kV to +30 kV Current range: -200uA to +200uA Ramp: Programmable voltage or current ramp. Polarity reversal: Programmable before and during the sample run. Autosampler: Position carousel for 30/48 sample/buffer vials. Variable vial size, including Eppendorf micro centrifuge tubes. Buffer volume: Max. 4 ml Sample volume: Minimum 10µl, max. 4 ml. Temperature control: Sample and buffer 4°C to 40°C. Capillary temperature: 5°C to below 60°C. Detector: Allows the use of: UV/Vis, fluorescence, diode array, LIF, conductivity, electrochemical, and MS. Year of manufacture: 2004 Model: PrinCe 560 0500.022/CR S/N: 50-14-05-3-23 Dimensions: 50x50x54 cm Weight: 35 kg Without functional test. More items - new and used - can be found in our shop! International shipping costs on request!

Condition: used, MERKLE Insquare W 300 AC/DC Welding Machine with original hose set Primary: Voltage: 3 x 400 V Frequency: 50 (60) Hz cos phi: 0.95 TIG DC Range: Open-circuit voltage: 80 V Working voltage: 10-22.8 V Welding current: 5-320 A Duty cycle 60% (10 min.): 320 A Duty cycle 80% (10 min.): 300 A Duty cycle 100%: 260 A (40°C) Primary continuous power: 9.5 kVA Primary continuous current: 13.7 A Primary peak current: 19 A TIG AC Range: Open-circuit voltage: 80 V Working voltage: 10-22.8 V Welding current: 5-320 A Duty cycle 60% (10 min.): 320 A Duty cycle 80% (10 min.): 300 A Duty cycle 100%: 260 A (40°C) Primary continuous power: 9.5 kVA Primary continuous current: 13.7 A Primary peak current: 19 A Electrode Welding: Electrode diameter: 1.5-6 mm Open-circuit voltage: 80 V Working voltage: 20-32.8 V Welding current: 5-320 A Duty cycle 60% (10 min.): 320 A Duty cycle 80% (10 min.): 300 A Duty cycle 100%: 260 A (40°C) Primary continuous power: 13.1 kVA Primary continuous current: 19 A Primary peak current: 22 A Welding Processes: 10-stage switch: TIG DC Negative, TIG DC Positive, TIG DC Negative with start pulse, TIG AC low-noise, TIG AC Rectangular TIG AC "Balanced TIG", Electrode Negative Electrode Positive Electrode "Sinusoidal" Electrode Rectangular Selector Switch 1: 10-stage switch: Current 1, Time 1, Ramp-up and ramp-down time, Starting current, ending current, Ignition pulse, point time, Pre-gas and post-gas time Selector Switch 2: 9-stage switch: Current 2, Time 2 (for pulse operation), AC balance, AC frequency, Hot start time and current, Current adjustment, Electrode diameter, display U Settings: 2 potentiometers for selector switch 1 and 2 Displays: 2 LED displays with preview and hold function for current, voltage, time, frequency Time functions: 4-stage switch: OFF, Slow pulsing, Fast pulsing, Spot welding Ignition: 4-stage switch: OFF, High frequency, Lift-TIG Energy control: 4-stage switch: on the unit, Hand or foot remote control, Welding torch Operating mode: 4-stage switch: 2-stroke, 4-stroke, 4-stroke with 2 currents, Gas test, Test, Program Ksdpfx Ajl Sm Hbsg Asnc Program memory: 20 memory locations freely assignable AC frequency: 50-200 Hz AC balance: 9-91 % Pre-gas time: 0-3 s Post-gas time: 0-25 s Current rise time: 0-2 s Current fall time: 0-20 s Ignition pulse: 0-100 ms Spot time: 0.1-2.5 s Slow pulsing: 10 ms-2.5 s Fast pulsing: 50 Hz-5 kHz Hot start time: 0-1.5 s Hot start current: 10-200 % Current adjustment: 100-250 % Button: Test protection device Button: Program selection LED: Power ON, Over temperature, Fault, Protection circuit, Display hold, Start current Rise, Current 1, Current 2, Fall, End current Power source: IGBT inverter Ignition: High frequency or Lift-TIG Standard: EN 60974-1 "S" / CE Torch connection: EURO central connection with 5-pin connector Torch cooling: Water circulation cooling system Socket 50 mm²: Workpiece cable Socket 50 mm²: Electrode welding cable Power connection: 4 x 4 mm², 5 m long Gas connection hose: 2 m Weight: 130 kg (300 AC/DC) Dimensions L x W x H: 910 x 600 x 910 mm with bottle holder Gas bottle holder: 10 - 20 - 50 l gas bottle More items - new and used - can be found in our shop! International shipping costs on request!

Condition: used, Liebert Emerson M31UA cooling system Perimeter cooling for data center environments Cooling capacity: 31 kW Air distribution: Downflow Ksdpfx Asd Ipgkog Aenc Design: Air-cooled Data sheet available at this link Item condition: used You can find more new and used items in our shop! International shipping costs available upon request!

Condition: used, EyeSys System 2000 Corneal Analysis System The EyeSys 2000 Corneal Analysis System was developed to provide unmatched performance, accuracy, ease of use, and affordability, with the following key features: Optimal central and peripheral corneal coverage provides complete information for the entire cornea. Automatic calibration and automatic data correction ensure higher accuracy of the topographic data. Automatic focusing and simple examination paths improve ease of use, accelerate the examination process, and virtually eliminate any focusing differences between operators. Advanced software applications include primary care, co-management, corneal surgery, and contact lens fitting. The unique and patented three-camera technology provides a side-view image of the patient's cornea and enables the use of true aspherical image processing algorithms. Simultaneous positioning of the patient and operator enables closer interaction with the patient during the examination. Easy to use Autofocus and correction Knsded Srnpspfx Ag Asc Automatic storage and printing functions Interactive help system Intuitive examination path Versatile and flexible Comprehensive diagnostic and surgical displays Personalized examination protocols Customizable displays and reports Comparison tools for multiple maps Accurate and reproducible Focus verification Artifact detection and correction Calibration verification Scope of delivery: 1 x EyeSys System 2000 1 x Intel PC with EyeSys software, monitor, keyboard, cable set Dimensions: 80 x 65 x 75 cm Weight: 55 kg You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: used,

Condition: used,

Condition: used,

Condition: used,

Condition: used, Huber & Ranner Air Handling Unit (AHU) For sale is a high-quality, multi-stage industrial ventilation and air conditioning system from the premium manufacturer Huber & Ranner. The unit was used as a recirculating air unit for a paint booth and is in excellent, clean, and professionally maintained overall condition. The system controls the complete air climate (filtering, cooling, humidifying, and conveying) and is ideal for production halls, paint shops, wood or metal processing, and large industrial projects. Technical data of the complete system: Manufacturer: Huber & Ranner GmbH (Made in Germany) Type / Size: X-CASE 15 (System reference: SPK ULA) Order number: 19 0090 Z / P.010 Volume flow / Air flow rate: 31,000 m³/h The modular components in detail: Powerful fan module: Motor power: 30 kW Static pressure: 1,855 Pa Voltage: 3x400 V / Rated current: 55 A Max. frequency: 49.7 (54.4) Hz Integrated cooling coil: Cooling capacity: 50 kW Material: CU / AL (Copper / Aluminum) Refrigerant: R134a High-efficiency filter stage: Filter class: F9 / Standard (Fine dust filter for the highest air purity) Filter type: TM 9U635A10-1 (Quantity: 9 pieces) Recommended final pressure: 250 Pa Humidifier & droplet separator module: For precise regulation of air humidity, including an integrated droplet separator to prevent moisture transfer into the air duct. Knjdpfxszrmcte Ag Aec "Everything from one source: We would be happy to offer you suitable bank financing for your project." You can find more new and used items in our shop! International shipping costs on request!

Condition: used, 7.5 m Stow Pallet Rack Manufacturer: Stow Type: Pallet Rack System Rack length approx. 7500 mm Upright height: approx. 6000 mm Upright depth: approx. 1100 mm Upright type: PLFB 16P Clear bay width: 3600 mm Number of bays: 2 Number of levels: 4 (6 beams + base level) Beam type: PNB 0436 Max. pallet weight: 1000 kg Permissible load per bay: 4000 kg Permissible load per frame: 20000 kg Upright surface: blue painted (RAL 5015) Year of manufacture: 2014/2020 Scope of delivery: 3 x uprights 6000 x 1100 mm, bay load 20000 kg, blue 12 x beams 3600 mm incl. safety pins, load per bay 4000 kg, orange Item location: Geisleden Your partner for safe warehouse logistics: assembly, disassembly & rack inspection An efficient warehouse is the backbone of your success. We ensure that your racking systems are installed correctly and meet all safety standards. As experts in warehouse technology, we offer you everything from a single source: Assembly & Disassembly Whether it's a new installation, a conversion, or a warehouse relocation – we take care of the professional assembly and disassembly of your systems: - Pallet racks (heavy-duty & standard) - Shelving for small parts and archiving - Warehouse platforms for optimal space utilization Rack inspection & testing according to DIN EN 15635 Safety is a legal requirement. We carry out the annual expert inspection (according to DGUV rule 108-007): - Inspection for deformations and damage. - Check of safety pins and load labels. - Creation of a legally valid inspection report including an inspection label. We would be happy to offer you a suitable bank financing for your project. More items - new and used - can be found in our shop! International shipping costs on request! Knjdpfxoydnuvo Ag Ajc

Year of construction: 2020, condition: used, This listing is for the Waters e2695 Alliance HPLC System The unit is in full working condition and ready for immediate use Designed for high-performance liquid chromatography, the Waters 2489 UV/Vis detector delivers accurate and reliable analysis. Ideal for research and quality control labs, it offers stable wavelength detection and seamless integration with HPLC systems. Transparency Report and Technical Audit: Knodpfx Agey H Egve Asc Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Integrity: 100% Original Parts (Non-Refurbished)

Year of construction: 2020, condition: used, This listing is for the Waters e2695 Alliance HPLC System Kedpfxsy H E Slj Ag Aenc The unit is in full working condition and ready for immediate use Designed for high-performance liquid chromatography, the Waters 2489 UV/Vis detector delivers accurate and reliable analysis. Ideal for research and quality control labs, it offers stable wavelength detection and seamless integration with HPLC systems. Includes Waters e2695 Seperations Module Transparency Report and Technical Audit: Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Integrity: 100% Original Parts (Non-Refurbished)

Year of construction: 2003, condition: good (used), functionality: fully functional, 1 x Gainsborough Engineering Ltd packing system, previously used to pack small machine components. Comprising of infeed pocket conveyor, vertical form, fill and seal bagger fitted with Zodiac HS printer and an outfeed conveyor. Manufacturer - Gainsborough Engineering Ltd. Model of VFFS bagger – GV2K1. Date of manufacture – 2003. Sealing bars - 250mm long (vertical & horizontal). Ksdpsy Hlvwefx Ag Aenc Reel width - 505mm. Current film - 230mm. Forming tube - 60mm diameter. Sorting / infeed table - 1500mm long x 710mm wide. Outfeed conveyor - 290mm wide belt x 950mm outfeed. Overall footprint - 6.15m long x 1.7m wide x 2.2m high. Condition – Fully operational.