Used Fine Blanking Press for sale (14,421)

Condition: ready for operation (used), Manual spindle press / 25 tons -Clearance between columns: 400mm -Spindle diameter: 80mm -Vertical clearance: 420mm -Various clamping jaws Dimensions: L x W x H 1.2 x 0.8 x 2 meters / Weight: 700kg Errors and omissions excepted. Gedpfxszcxdle Ahvouc

Condition: used, mileage: 175,000 km, power: 210 kW (285.52 HP), first registration: 12/2010, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro5, total width: 2,550 mm, total height: 3,520 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, * Mercedes Benz 2629 ECONIC refuse collection vehicle with Faun Power Press 522 and Zoeller lifter - Euro 5 - * Diesel - Engine capacity: 6,374 cc - 210 kW / 290 hp - Euro 5 - Green environmental badge - * German vehicle - German registration certificate - Immediately available - From first owner - * Unladen weight: 16,050 kg - Permissible total weight: 26,000 kg - Payload: 9,950 kg * Tyres: 315 / 60 R 22.5 - Vehicle is immediately available and ready for collection - * Please schedule an appointment for viewing - * Contact: Mr. Andreas Vogel * The information provided on the internet is non-binding and for description purposes only. * They do not constitute guaranteed characteristics. * The seller does not accept liability for typographical or data transmission errors. Gsdpfx Ahsx A Rbusvsuc * Subject to change, error, and prior sale.

Condition: used, Hydraulic Press Brake SAGITA BEYELER 200/4000 Slide travel: 150 mm Gsdpfxezcxn Ds Ahvsuc Throat depth: 300 mm Distance between uprights: 3100 mm Motor power: 15 kW Manual Back gear gauge The machine was only used for pre-bending of Hardox sheet Voltage: 380 V Dimensions (L x W x H): 4100 x 1800 x 2700 mm Weight: approx 15 T

Condition: new, pressing force: 250 t, stroke length: 400 mm, - Cylinder stroke 400 mm - Working width 1200 x 450 mm - Cylinder is movable - Pressure gauge - With V-blocks - Emergency stop - Weight 2250 kg Gujdpfxegg Nygj Ahvjc - Motor power 7.5 kVA - Documentation - 400 V

Condition: ready for operation (used), Year of construction: 2024, workpiece length (max.): 750 mm, workpiece width (max.): 530 mm, workpiece height (max.): 6 mm, The machine has already been dismantled by a specialist company and placed in storage. TECHNICAL DETAILS Punching width max.: 530 mm Punching length max.: 750 mm Material thickness max.: 6 mm EQUIPMENT PC workstation Guedpfezb Iihjx Ahvjc DZDV-PC-TOUCHSCREEN PC 32" 9970460-20 incl. console Hot foil stamping/embossing system SLEEKING System HAK 100/Brother Note: Accessories are sold as is, without warranty. The principle applies: "Item purchased as seen." The prospective buyer must verify the completeness of the item on site.

Condition: good (used), Year of construction: 2002, Total counter reading approx. 41 million impressions. - Autoplate - Alcolor with Technotrans Alpha - Automatic blanket and impression cylinder washing system - Automatic ink roller washing system - Powder sprayer Grafix Alphatronic 200 Gsdpfx Aezczmiohveuc - Plus version including numbering and perforation unit - Cito system

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, machine/vehicle number: 31366, Albert Frankenthal A 102 B cut-off 900 mm Specific book printing machine year 12.1985 maximum speed 22 000 sheets/ hour working speed 18 500 sheets/ hour cylinder circumference 900 mm maximum paper width 650 mm length with the dryer 19,5 m, width, 1,85 m, (without additional equipment) height, 3,10 m, (without additional equipment) The machine wholeness includes the following: (please note drawing in pictures) Gujdpfszcn Dbox Ahvsc Albert statopaster, Automatic system for reel change during printing Albert Einzugswerk paper infeed unit Albert Druckeinheit, printing unit what has: - Baldwin dampening system, control from the main control board - System for ink control from the main control board - Envetron blanket washing system - ARO pump for ink dosage Hauptantrieb = main engine M.E.G. Sigma, Trockner = gas oven Baumuller Nordberg electrical system Albert Frankenthal, folder with longitudinal cross perforation, web cutting, (450 mm) and collecting to be 32-page sheets Remote-access consoles, in their own isolated room Printing plate folding and sta Machine manual, electrical drowings and spare parts single owner and kept in the same location since new Very well maintained For sale as-is or dismantled and loaded to trucks. Please contact for more details Additionally for sale with machine: long boundle stacker with Strapex stapper: Made in Finland automatic bundle palletizer: Made in Finland

Condition: used, Year of construction: 1981, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, input current: 25 A, pressing force: 40 t, We offer this used Reis TUS 60 40kn inking press, manufactured in 1981, for sale. Circuit diagram number: 004209/001303 Machine number: 01031 Power supply: 3 N Frequency: 50 Hz Guedpezcq Aajfx Ahvoc Operating voltage: 380 V Rated current: 25 A Control voltage with transformer: 220 V Rated current of the fuse in the supply line (slow-blow): 35 A If you have any questions or require further information, please feel free to send us a message or call us.

Year of construction: 2026, condition: new, functionality: fully functional, • A vertical guillotine shear with a 3 mm or 6 mm steel cutting capacity on a 3 m width, with a motorized back gauge, an optical system for contour cutting, and an optional pneumatic sheet support. • A 50 or 100 T press brake with a 3 m distance between uprights, with 3 digitized axes (X, the back gauge, and synchronization of the left Y1 and right Y2 cylinders). A CYBELEC touch-screen CNC control with digital or graphical programming. Features: With minimal floor space in the workshop, you have the equivalent of 2 high-end conventional machines: • A vertical guillotine shear equipped with a motorized back gauge (700 mm length), an optical system for contour cutting, proportional clamping relative to the cutting force, 2 reversible 4-sided blades, and an optional pneumatic sheet support. • A press brake equipped with a motorized back gauge (700 mm length) and fully electronic angle management with 2 digital rulers (synchronization of the left Y1 and right Y2 cylinders with force management), allowing bending either in a single stroke or in the air with a positioning accuracy of 0.04 mm. - Distance between uprights = 3200 mm - Unlimited bending capability, as there is no interference with the gooseneck! Godpozcyx Defx Ahvjuc - Direct angle programming + graphical programming with automatic calculation of the developed length and 2D bending simulation. - Automatic pressure control in real time. - A complete set of tooling with a 9-V die + gooseneck punches + adjustable punch holders. - A 2-year warranty. Available in several versions: - Cutting capacities: 3 or 6 mm steel - Cutting lengths: 1250 / 2040 / 3040 mm - Bending pressure: 50 and 100 T - Bending lengths: 1400 / 2200 / 3200 mm - Cybelec graphical CNC control, 3 axes. More than 1000 installations in Europe. Inquire now! With the COMBI and its 3 digitized axes X, Y1, Y2, you really have the equivalent of 2 excellent machines, with the added benefit of technology typically intended for industrial applications (Y1 Y2 synchronization). Since 2004, JC COLOMBO has been distributing the COMBI combined shear and press brake. With ideal capabilities for locksmithing and metalworking activities (3040 x 6 mm shear and 3200 x 75 T bending), the COMBI allows all companies that do not have space for 2 conventional machines to equip themselves and become fully self-sufficient and much more responsive to complete projects. Workshops with 100 m² and 2 employees have opted for the COMBI! A 50 T version has also been specifically designed for the production of cladding for aluminum joinery companies. Furthermore, with equipment such as the automatic sheet support for the shear, the Y1 Y2 cylinder synchronization, and the direct angle setting program, the customer really has the equivalent of 2 excellent industrial-grade machines at a lower cost. To date, more than 600 professionals use the COMBI in France.

Condition: refurbished (used), Year of construction: 2020, functionality: fully functional, power: 4 kW (5.44 HP), pressing force: 80 t, stroke length: 60 mm, Power: 80 Ton Table size: 680 x 540 mm Strokes per minute: 60/min. Godpfx Aozbvvvehveuc Stroke: 60 mm Throat depth: 275 mm Gap in bed: 150 mm Controll: 2- hand controller Country of origin: Netherlands Motor power: 4 kW Machine (L×W×H): 175 x 100 x 235 cm Machine weight: 3700 kg

Condition: good (used), Year of construction: 2017, functionality: fully functional, power: 11 kW (14.96 HP), pressing force: 100 t, stroke length: 300 mm, operating speed: 10 mm/s, Equipment: CE marking, safety light barrier, Bending capacity: 100 Ton Bending length: 3100 mm Backgauge: 550 mm Stroke length: 300 mm Gjdpfszbvuljx Ahvouc Bending speed: 10 mm/sec Supplied with: - 2 support arms - Integrated safetyscreen - 6 axis controlled Y1, Y2, X, R, Z1, Z2 - Cabinet with many tools - User manuals Country of origin: Netherlands Motor power: 11 kW Machine (L×W×H): 400 x 230 x 290 cm Machine weight: 6350 kg

Condition: excellent (used), Year of construction: 1975, functionality: fully functional, throat depth: 450 mm, Very good condition! With gearbox: Capacity: 300 t Strokes: 35 spm Throat depth: 450 mm - Pneumatic clutch - Ram weight balance Ram stroke: 20 - 140 mm Godpfx Ahszc Rw Rovouc Ram adjustment: 80 mm Motor power: 30 HP

Condition: used, mileage: 167,307 km, power: 257 kW (349.42 HP), first registration: 07/2006, fuel type: diesel, empty load weight: 15,850 kg, maximum load weight: 10,150 kg, overall weight: 26,000 kg, tire size: 315 / 80 R 22,5, axle configuration: 6x2, wheelbase: 4,200 mm, brakes: constant throttle, color: orange, driver cabin: day cab, gearing type: automatic, emission class: euro4, suspension: steel-air, number of seats: 2, total length: 2,500 mm, total width: 3,550 mm, Equipment: ABS, air conditioning, cabin, cruise control, differential lock, fog lights, low noise, Vehicle location: Bovenden, license plate house, 1x air seat, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, radio, cruise control, ABS (anti-lock braking system), constant throttle, raised exhaust, automatic, lifting+lowering, central lubrication system, differential lock, fog lights, rotating beacon, leaf-air suspension, low-noise G1, last axle forced steering, environmental badge green Gsdpfx Asvhhgvjhvjuc Wheelbase: 4200 mm Body: FAUN POWER PRESS 524 , WAAGE SYWATEC scales Sywatec weighing range 200kg-12000kg, reversing camera Vehicle is without engine!!! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,000 kg, oil tank capacity: 3,100 l, power: 150 kW (203.94 HP), year of last overhaul: 2025, volume flow: 795 m³/h, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced Gujdpfxezbxwio Ahvsc • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see video for the machine function test. The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.

Condition: reconditioned (used), Year of construction: 2019, operating hours: 3,000 h, functionality: fully functional, pressing force: 70 t, overall weight: 9,500 kg, year of last overhaul: 2025, filling opening width: 420 mm, filling opening length: 1,250 mm, Technical data packing press / can press / metal sheet press: Manufacturer unoTech GmbH Type UPAXX 70 Year of manufacture 2019 Operating hours approx. 3,000 hours Pressing force 700 kN at 315 bar Filling opening chute 420 x 1,250 mm (d x w) Channel cross-section (package dimension) 350 x 500 mm (h x w), length depending on material Drive power 30 kW Connected load 40 kW Power consumption, total 70 A Throughput capacity for empty beverage cans with: one pressing stroke approx. 1.7 t/hour two pressing strokes approx. 2.5 t/hour Achieved compaction approx. 1200 kg/m³ Hydraulic oil tank capacity 850 l Press dimensions built up 8,000 x 1,600 x 2,500 mm (l x w x h) Transport weight press approx. 9.5 t Accessories: Oil cooler 1.5 kW, oil tank heater 1.5 kW, press box made of wear-resistant steel S355 Material properties: According to the manufacturer, this machine is suitable for pressing tin cans, metal sheet offcuts, sheet steel as well as aliminium, brass and copper waste. Gedpfx Aezbxvljhvjuc Condition of the baler: The packing press has been fully overhauled in our workshop. The press is in very good condition; please see the demonstration video following the overhaul. The machine sustained transport damage whilst being moved. The control cabinet was damaged and slightly dented by a forklift truck, and the main switch (on/off switch) was damaged. These damages are reflected in the significantly reduced sale price and must be repaired by the buyer at their own expense. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Year of construction: 2001, condition: ready for operation (used), A two-color sheet-fed gravure printing press H.C. Moog is available. Paper weight range: 80g-400g/m², max. cardboard weight: 400g/m², max. printing dimensions X/Y: 720mm/1040mm, cylinder diameter: 300mm, max. production speed: 10000sheets/h, printing units: 2, drying stations: 4, gripper fields: 13, UV power: 3×160W, power consumption: 81kW. Includes Heidelberg high-performance stream feeder, Grafix intermediate dryer, intermediate dryer heater, air flotation dryer, UV drying unit, water cooling and cylinder transport trolley. Documentation available. An on-site inspection is possible. Gusdpfxezcp U Ie Ahvsc

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Pneumatic press for edge-gluing wood panels. TECHFA type PTD 6000 Max. dimensions of glued elements: - length: 6300 mm - width: 160 mm Gsdpfsyivr Hox Ahvjuc - height: 850 mm Press is divided into 4 sections.

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, The machine is fully operational and in good condition. Working dimensions: 3200 x 2200 mm Dimension adjustment is electrically controlled from the control panel. Gusdpfxsxmr Rxo Ahvsc Powered by a hydraulic unit.

Condition: excellent (used), Year of construction: 1997, operating hours: 212 h, functionality: fully functional, color channels: 5, CP-Tronic digital machine control system Gedjzcwl Uepfx Ahvsuc CPC 1-04 Center control console with remote control unit for color zones, color ducts, and circumferential, lateral, and diagonal registration, with light guide and job memory card Alcolor film dampening system with circulation and cooling Ink temperature control (water-cooled) Autoplate automatic plate changing system Preset automatic format setting Automatic ink roller washing system Automatic blanket and impression cylinder washing system Powder sprayer High-stack delivery Standard accessories

Condition: new, Year of construction: 2022, New machine Year of manufacture: 2022 • Hydraulic presses for gluing construction timber and blockboards • Compact footprint with front loading • Chassis on wheels, two of which are steerable • Height-adjustable hydraulic cylinders with manual adjustment—practical and functional • Vertically adjustable columns with frame pressing device Technical data: Working surface(s): 1 Usable dimensions: 2500 x 1800 mm Number of vertical hydraulic cylinders with manual adjustment: 3 Gsdpskwhb Hsfx Ahvouc Number of horizontal manual hydraulic cylinders: 2 Travel of hydraulic cylinders with manual adjustment: 60 mm Pressure of hydraulic cylinders with manual adjustment: 1500 kg Installation dimensions approx. 3200 x 800 x 2200 mm Location: Flörsheim Availability: short notice

Condition: reconditioned (used), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 08/2027, type of input current: three-phase, year of last overhaul: 2026, Dough divider and shaping machine TOP Fortuna roll former, size 3 Robust technology Dough head newly revised Stainless steel knives, new Connection: 400V, 16A-CEE plug Dimensions: 580 x 580 x 1350 mm (W x D x H) Used machine, refurbished with warranty + spare parts service Optional: Stainless steel platform New shaping plate Gujdpfxow Hn H Ej Ahvec Service package Maintenance contract Training & commissioning Delivery service Test our exclusive service for you!

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, filling opening width: 920 mm, filling opening length: 1,600 mm, Hello, I am selling a fully operational Paal Comdec channel baler. The machine has been serviced and is in very good technical condition. It comes complete with a belt conveyor. In 2025, the conveyor belt was replaced. Gjdpfx Ajyk Uzpshvouc

Condition: used, Year of construction: 2024, New display machine! List price: €32,665,- complete in standard configuration with: Sturdy, torsion-resistant steel frame constructed with welded and bolted assemblies. Louvered top press beam with 6 elements; louvered side press beam with 5 elements. Louvered press beams feature the proven Ganner system tolerance compensation for tightly pressed carcass joints. Counterpressure surfaces (side pressure wall and bottom) are 38 mm thick, coated, continuous support plates. Continuous pressing surface with a height of 95 mm at the lower vertical press beam. Electromotive adjustment of both press beams via precision trapezoidal threaded spindles (with increased pitch and running accuracy) and high-performance running nuts with grease reservoir. Pressing is performed electromechanically via two separate worm gear motors (2 x 0.75 kW). The pressing force of the press beams is continuously adjustable via 2 potentiometers and controlled electronically by frequency converters, ensuring absolutely wear-free force control. Pressing force for the horizontal press beam: min. 500 daN (kg), steplessly adjustable up to max. 2200 daN (kg). Pressing force for the vertical press beam: min. 300 daN (kg), steplessly adjustable up to max. 2200 daN (kg). Pressing and adjustment speed of the press beams with fine positioning, selectable via three-position rotary switch: 5 / 10 / 25 mm/second. Very simple operation using 6 separate push buttons; 8 movement sequences selectable via control system. Freely adjustable pressing time preselection with automatic opening from 0–30 min (switchable to seconds or hours). Working height/feed height: 300 mm. Working dimensions: Length min: 150 mm, max: 2500 mm; Height min: 150 mm, max: 1400 mm; Depth: 700 mm. Weight: approx. 1800 kg net. Dimensions (Length x Width x Height): 3.45 m x 0.95 m x 2.30 m. Electrical connection: 400V, 3Ph, 50Hz (3.2 kVA, 16A). Additional equipment: Rapid traverse speed for quick positioning of the press beams, controlled via automatic workpiece detection with sensors in the press beams. Pressing speeds of 5 / 10 / 25 mm/sec and rapid traverse speed of 50 mm/sec; sensors can be deactivated for pressing special components. 1 set of machine feet (working height 500 mm). Storage location: Guodpfxjuf Hx Hj Ahvjc

Condition: used, Year of construction: 2025, New demonstration machine! MOVE — the high-precision vacuum press with gigantic usable area for vacuum lamination and vacuum veneering of curved workpieces. Offers extensive flexibility thanks to absolute mobility and a revolutionary folding mechanism that reduces the footprint to 45% when folded. High-precision vacuum press with folding lid, including: - Revolutionary folding mechanism (reduces footprint to 45%) - 40 m³ high-performance vacuum pump (up to 900 mbar (9 t/m²)) by BECKER - Optional automatic shut-off when pressure is reached (especially for large vacuum volumes) - Pressure regulation: 400 to 900 mbar, analog vacuum gauge - Highly elastic natural rubber membrane (up to +130 °C) - Quick-change membrane system - Robust phenolic resin work surface (up to +120 °C), 15-ply bonded - Gas struts for lid opening - Vacuum gauge - Connection for external vacuum bag - Smooth-running swivel castors - FESTO pneumatics and SIEMENS electrical components Technical specifications and dimensions: - Usable area: approx. 3050 x 1350 mm - Inner frame dimensions: approx. 3130 x 1430 mm - Total dimensions: approx. 3700 x 1700 x 1100 mm - Total dimensions (folded): approx. 3700 x 770 x 1780 mm - Electrical connection: 1~, 0.8/1.0 kW, 230 VAC +/- 10%, 50/60 Hz - Weight: 670 kg Location: Rieth Gusdpoyi Hd Hsfx Ahvjc

Condition: good (used), Strautmann AutoLoadBaler baling press Suitable for baling: Cardboard Film PET bottles Foam Cans Electronic waste Machine dimensions (length / width / height) mm: 2047 / 2179 / 3050 Opening approx. 1192 mm / 575 mm Bale size (length / width / height) mm: 1200 / 800 / 1100 Bale weight approx. 480 kg Guodpfxjv Aktne Ahvsc Pressing force kN: 530 Year of manufacture: 2017-2018