Used Fliegl Hubtisch, Gitterrostboden, E-Hydr., Seilwinde for sale (72,229)

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33802037879, empty load weight: 3,250 kg, maximum load weight: 34,750 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 6,790 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, available in multiple units Chassis, semi-trailer, container Fine-grain steel welded construction, kingpin plate with replaceable 2" kingpin Container fittings: 1 x 20 ft, flush at the rear (Note: low drawbar load with 20 ft container) 24 tons, 2-speed landing gear, single-sided operation, with semi-circular base and straight connection plate, with stroke equalization 2 support wedges with holder Rear underrun protection, steel Spray flaps at the rear, covering the entire width Half-shell fenders with anti-spray flaps according to EC Storage box for fire extinguishers up to 6 kg Fire extinguisher (ABC powder 6 kg) incl. stainless steel drip tray in the center of the rear container crossbeam, approx. 290 mm wide Axles + Suspension BPW disc brake axles, with 430 mm disc diameter "Axles/chassis laser-aligned" - reduces tire wear and fuel consumption Axle spacing offset 1410/1310 mm (combined transport), up to 44 tons total weight Air suspension 1st axle, automatic lift axle, including forced lowering and start assist, activated by "pressing the brake pedal 3 times" (start assist is functional up to an axle load exceedance of 30% and up to a speed of max. 25 km/h) Braking system 2-line pneumatic braking system Color-coded line routing for easy servicing Spring brake parking brake 2 tamper-proof coupling heads at the front, without connecting line 24-volt EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lift and lower valve Vehicle - driving stability system Axle load detection via EBS-CAN bus signal, for display on the dashboard in the cab, truck must be prepared accordingly, no truck installation (no calibrated scale) Wheels and tires 385/55 R22.5", manufacturer at the discretion of the manufacturer Steel rims, factory silver Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front in LED 2 white/red marker lights at the rear 1 x 15-pin socket at the front, without connecting cable Operating instructions The specified total weight is technically possible; depending on the cargo, the total weight may not be reached while complying with the permissible axle/support and drawbar loads. (Poor driving and handling characteristics possible due to incorrect load distribution) Country of registration/plates Germany with Dekra inspection and certificate (according to §13 EG - FGV) 24/7 service hotline prepared for single-row license plate holder Warning sign "A" for waste transport, foldable ADR approval according to FL/AT with ADR warning sign at the rear Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paintwork Frame RAL 2011 traffic orange "10-year warranty against rust-through" Support feet black coated Kodpfxszbtnie Amtelw available in multiple units

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 14,680 kg, maximum load weight: 35,320 kg, overall weight: 50,000 kg, axle configuration: 3 axles, loading space length: 10,300 mm, loading space width: 2,520 mm, loading space height: 600 mm, total length: 15,400 mm, total width: 2,550 mm, tire size: 235/75 R17,5", tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements. Chassis: Low-loader semi-trailer Steel welded construction, kingpin plate with 2 replaceable kingpins Klodpfx Aoi Ri Hgomtew 24 tons, 2-speed landing gear, single-sided operation, with straight lower part, without stroke compensation Folding rear support 2x chock blocks with holder Aluminum side impact protection Quarter panel fenders in front of and behind the axle assembly with splash flaps behind each axle 1x storage box, w=2,350 mm x l=730 mm x h=640 mm, mounted crosswise at the front on the floor of the gooseneck, with 2 storage trays Extendable widening elements up to 3,000 mm (not in rear slope)(However, the track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for wooden planks on the gooseneck, at the front, crosswise Wooden planks 70 mm for widening to 3,000 mm Excavator arm recess starting above the rear axles to the rear, approx. 500 mm wide and approx. 230 mm deep Tie-down points: Low-loader 3 pairs of tie-down points, each 10 tons, at the front of the gooseneck, 8 pairs of tie-down points, each 10 tons, in the low bed, 3 pairs of tie-down rails in the wheel track area of the low bed, 3 pairs of tie-down points, each 10 tons, in the axle/rear area Axles + Suspension SAF drum brake axles Axle/chassis laser-measured, reducing tire wear and fuel consumption with steering axle Air suspension Wheels and tires 235 / 75 R 17.5 as chosen by the manufacturer Steel rims in twin arrangement, factory silver Braking system 2-line pneumatic braking system, color-coded lines for easy servicing Spring brake parking brake EBS, Electronic Braking System with EBS socket at the front, without connecting cable Note: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! 2 fail-safe coupling heads at the front, without connecting line with lift & lower valve, hold function in the lowered position + auto-reset function Axle load detection via EBS-CAN bus signal, for display on the display in the driver's cab, truck must be prepared accordingly, no truck installation (no calibrated scale) Vehicle - Driving stability system Trailer Info Center, for displaying vehicle data such as axle loads (no calibrated scale), mileage and diagnostic/system messages Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front in LED 2 white/red marker lights at the rear 2 x 7-pole fail-safe sockets at the front 1x additional LED work light at the rear 1x LED rotating beacon with holder, switched via parking lights 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Gooseneck with steel/diamond plate covering in the wheel track area with 70 mm softwood floor, in the wheel arch area steel/diamond plate covering, low bed on the left and right in the wheel track area can be hydraulically raised for entry, via truck auxiliary drive Rear slope with 70 mm softwood floor Low bed length approx. 6,300 mm Side walls 25 mm aluminum hollow profile, 400 mm high, can be plugged into the front and side on the gooseneck Ramps Steel ramps 2,800 mm long, 750 mm wide Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown i

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 11,800 kg, maximum load weight: 29,200 kg, overall weight: 41,000 kg, axle configuration: 3 axles, loading space length: 9,350 mm, loading space width: 2,520 mm, loading space height: 900 mm, total length: 13,650 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Custom-Tailored Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Chassis: Low-loader semi-trailer Steel welded construction, kingpin plate with interchangeable 2 kingpins and 2 kingpin positions 24 tons, 2-speed landing gear, single-sided operation, with semi-circular lower section and straight connection plate, with stroke compensation Foldable rear supports Wheel chocks with holder Aluminum side underrun protection Splash guards in front of the 1st axle and behind each axle with anti-spray, according to EC Toolbox, stainless steel, w=600/h=400/d=500 mm, with polished door, lockable Hydraulic lift table after gooseneck, approximately 3000 mm long, hydraulically raised for crossing the gooseneck, with mechanical locking in the raised position. Operated with a wireless remote control Electric winch, 24 volts, pulling force 8165 kg, mounted centrally at the front on the gooseneck loading area, in a stainless steel box with a door (if technically possible, further review required), operated with a wireless remote control, cable length 35 m x approx. 10 mm, with roller cable guide and removable guide rollers on the gooseneck and rear slope. Tie-down points: Low-loader Gooseneck: 5 pairs of tie-down points recessed in the outer frame, each with 5 tons. 2 pairs of tie-down points in the middle, each with 5 tons. 1 pair of tie-down eyes recessed at the top and outside in the outer frame in the neck slope, each with 10 tons. Main platform: 4 pairs of tie-down points recessed in the outer frame, each with 5 tons. 4 pairs of tie-down points in the middle, each with 5 tons. 1 pair of tie-down eyes recessed at the top and outside in the outer frame, each with 10 tons. Rear platform: 4 pairs of tie-down points recessed in the outer frame, each with 5 tons. 5 pairs of tie-down points in the middle, each with 5 tons. 4 pairs of tie-down eyes recessed at the top and outside in the outer frame, each with 10 tons. Axles + Suspension SAF drum brake axles Axle/chassis laser-measured, reducing tire wear and fuel consumption Last axle with steered trailing arm, with automatic reversing lock via reversing light, and additional locking function on the vehicle via a hand button Air suspension with lift/lower valve, with holding function for lowering + auto-reset function Wheels and Tires 235 / 75 R 17.5 According to the manufacturer's choice Steel rims in twin arrangement, factory silver Braking System 2-line compressed air brake system Spring brake parking brake Vehicle - Driving Stability System Axle load recognition via EBS-CAN bus signal, for display on the driver's cab, truck must be appropriately prepared, no truck installation (no calibrated scale) 2 fail-safe coupling heads in front, without connection cable EBS, Electronic Braking System with EBS socket in front, without connection cable Electrical System 24 volts, multi-chamber lights, yellow LED lighting on the sides 2 white position lights in front 2 white/red side marker lights in the rear Lights completely in LED version 2 x 7-pin and 1 x 15-pin fail-safe sockets in front Additional LED work lights, at the rear, switched via reversing light LED rotating beacon with holder, switched via parking light Pair of warning signs, double LED illuminated and extendable to 3000 mm Floor Gooseneck with Mega Grip, covered with interlocking grating/low-loader platfo Ksdei Ri E Uepfx Amtelw

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 8,900 kg, maximum load weight: 32,100 kg, overall weight: 41,000 kg, axle configuration: 3 axles, loading space length: 9,200 mm, loading space width: 2,520 mm, loading space height: 900 mm, total length: 13,300 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements. Chassis, Low-loader Semi-trailer Steel welded construction, kingpin plate with 2 replaceable kingpins and 2 kingpin positions 24 tons, 2-speed landing gear, single-side operation, with straight lower part, without lateral support Foldable rear support 2 chock blocks with holder Aluminum side protection Fender fairings in front of and behind the axle assembly 1st pair of wheel recesses integrated into the gooseneck area in the low-bed section, angled for easy entry. Length at the bottom approx. 1600 mm, depth of wheel recesses approx. 260 mm. Note! Frame in the main beam area is 260 mm higher than the wheel recess. 2nd pair of wheel recesses between axles A and B. Length at the bottom approx. 350 mm, depth approx. 260 mm. Note! Frame in the main beam area is 260 mm higher than the wheel recess. If wheel loaders are to be transported and the overall height needs to be checked, please provide the technical data sheet for the wheel loader models with detailed specifications (if the overall height is exceeded). Wheel recess cover, retractable from the main frame, with wood inserts. Extensions retractable to 3,000 mm (not in the rear slope and not in the wheel recesses at the bottom) Storage compartment for timber planks on the gooseneck, across the front Timber planks, 70 mm, for extension to 3000 mm Tie-down points for low-loader 2 pairs of ring-type tie-down points, 5 tons each, at the front on the gooseneck 11 pairs of tie-down eyes integrated into the top and side of the outer frame, 10 tons each 2 x on the gooseneck, 9 x distributed in the low-loader area, first tie-down point 250 mm from the front and last max. 250 mm from the rear, spacing between tie-down points not greater than 1100 mm 8 pairs of stake pockets integrated into the outer frame, inner dimensions 70 x 40 mm, or, instead of stake pockets, 5-ton ring-type tie-down points embedded in the floor Axles + Suspension SAF drum brake axles Axle/chassis laser-aligned to reduce tire wear and fuel consumption Air suspension Wheels and Tires 235 / 75 R 17.5 Klsdpfxei Ri Hce Amtsw Manufacturer's choice Steel rims in twin configuration, factory silver Braking System 2-line pneumatic braking system Spring-loaded parking brake EBS, Electronic Braking System with EBS socket at the front, without connection cable 2 keyed coupling heads at the front With raise and lower valve Axle load detection via EBS-CAN bus signal, for display on the dashboard in the cab; truck must be suitably pre-equipped. Vehicle - Driving Stability System Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole keyed sockets at the front 1 x LED rotating beacon with holder, switched via side lights 2 pairs of warning signs, double LED illuminated and retractable to 3,000 mm, detachable with connector Floor Gooseneck with steel/non-slip steel plate Storage box integrated into the access slope to the gooseneck Then with 70 mm softwood floor, in the wheel recesses at the bottom and in the wheel well area, steel/non-slip steel plate Low-loader platform including rear slope, 9,100 mm Ramps Steel ramps, 2,800 mm long, 750 mm wide, side-shiftable Additional ramp securing at the bottom.

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33902036248, empty load weight: 7,272 kg, maximum load weight: 27,728 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,460 mm, loading space width: 2,470 mm, loading space height: 2,655 mm, loading space volume: 92 m³, total length: 13,800 mm, total width: 2,550 mm, total height: 4,005 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Container color: solid color, RAL color freely selectable Chassis: semi-trailer, for forwarding companies Fine-grained steel welded construction in lightweight design, up to the support legs, trailer plate with replaceable 2" kingpin 24 tons, 2-speed support winch, single-sided operation Extension ladder at the rear Door latch on the side Folding mudguard for lighting unit Rear impact protection 1 aluminum ladder approx. 3,550 mm, with holder on the side 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Axles + suspension BPW disc brake axles with 430 mm disc diameter Air suspension, 1st axle automatic lift axle, including forced lowering and starting assist, activated by "3x braking" Braking system 2-line compressed air braking system Spring brake parking brake 2 tamper-proof coupling heads at the front 24 Volt EBS, electronic braking system with EBS socket at the front Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! with lifting and lowering valve Vehicle - driving stability system "TPMS" tire pressure monitoring system according to ECE R 141, display via display in the towing vehicle, via EBS 1 additional air connection on the left rear, with quick-release coupling Wheels and tires 385/55 R22.5", manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the side Yellow LED lighting on the side linked to the turn signal ("flashing side marker lights") 2 white position lights at the front in LED 2 white/red side marker lights at the rear 2 x 7-pin and 1 x 15-pin tamper-proof sockets at the front, without connecting cable 2 additional LED work lights at the rear, switched via reversing light Kodpfsza S E Rsx Amtolw Self-tipping hydraulics Hydraulic cylinder with sliding mechanism installed in the floor. 2-circuit hydraulics. Switching between forward/reverse operation is done electrically via remote control with cable Operation hydraulically via truck PTO Hydraulic connection with hose on the front wall and HDK screw connection NW = 48 mm Self-tipping floor Sliding floor with wear plate at the rear Floorboards made of aluminum, 8 mm floor profile, ribbed design Self-tipping container Aluminum box container made of high-quality, abrasion-resistant material. Front and side walls made of aluminum hollow profiles, welded all around at the top with a wide special reinforcing profile made of aluminum, welded to a special frame at the bottom. Sliding wall for better unloading of the load, with reinforced tarpaulin flaps at the bottom. Rear wall made of aluminum hollow profiles, as a 2-wing door, with a 1/2 to 1/2 split, framed all around with a special U-profile with stop and rubber seal, with 2 swivel latch bars on the outside, locked at the top and bottom. Rear wall with mechanical safety locking, operated at the rear on the left in the direction of travel Standing platform with ladder on both sides in the direction of travel left/right and railing, for opening and closing the roof tarpaulin 3 removable, swiveling crossbars for tarpaulin support + tarpaulin support at the front on the front wall and at the rear on the rear wall Paint finish Frame DB 7350 Novagrau "10-year warranty against rust through" Support legs Black coated Container Aluminum natural - can be painted in RAL color according to customer's request Roof tarpaulin Not yet

Condition: new, Year of construction: 2024, load capacity: 1,500 kg, Perforated table 1200 x 2400 x 200mm Thickness of the table top 20 mm, diameter of the holes 28 mm Swivel range 360° Height adjustment Hydraulic motor 800 to 1200mm Speed 0.5 rpm Motor power 0.75 KW We offer the tables in many sizes and load capacities: Load capacity 500 Kg, dimensions 1000mm x 1500mm x 200mm, bore 28mm with manual or automatic height adjustment Load capacity 1000 kg, dimensions 1000 mm x 2000 mm x 200 mm, 28 mm hole with manual or automatic height adjustment Load capacity 1500 kg, dimensions 1200 mm x 2400 mm x 200 mm, 28 mm hole with manual or automatic height adjustment Load capacity 2000 kg, dimensions 1200 mm x 2400 mm x 200 mm, 28 mm hole with manual or automatic height adjustment Load capacity 3000 kg, dimensions 1200 mm x 2400 mm x 200 mm, 28 mm hole with manual or automatic height adjustment Load capacity 5000 kg, dimensions 1500mm x 3000mm x 200mm, bore 28mm with manual or automatic height adjustment Ksdor Uft Dspfx Amtolw

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33901014072, empty load weight: 7,300 kg, maximum load weight: 27,700 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,530 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 3,330 mm, suspension: air, tire size: 385/65 R 22,5", tire condition: 100 %, color: silver, Chassis, semi-trailer, transport company Fine-grained steel, welded lightweight construction, kingpin plate with replaceable 2" kingpin, main frame reinforcement for 25 tons, with center of gravity at 3 m loading length in the retracted state. 13 pairs of hooks for lashing straps, welded onto the cross members. 23 pairs of lashing eyes recessed in the outer frame, each rated at 3.5 tons. 24-ton, 2-speed support winch in reinforced design for loading and unloading, single-sided operation. 1 spare wheel holder for 1 spare wheel. Kljdpoza Dyyofx Amtjw 1 storage compartment for stowage, open, with the option of stowing items behind the front wall or in a compartment between the extended longitudinal beams! 4 pairs of stake pockets recessed in the outer frame for rectangular tubes 80x80 mm. 5 stake pockets recessed in the middle of the floor for rectangular tubes 80x80 mm, with reinforcing beam, installed between the outer stake pockets, except for one. 6 lashing/stake rails recessed across the floor over the entire width to the outer frame (max. usable internal width between the outer stake sockets approx. 2170 mm), approx. 100 mm high. With 20 mm round steel rails, top and bottom, spacing from top to bottom approx. 60 mm (of the round steel). Bottom with an angle plate as a closure, half open downwards. For lashing and inserting stakes 80 x 80 mm. Pull-out ladder at the rear on the right side. 5 x 3 pairs of stake pockets recessed on the outside of the longitudinal beams for rectangular tubes 80x80 mm, including reinforcing beams. 10 "lightweight" stake sockets, B=80/ T=80/, usable height approx. 1850 mm, hot-dip galvanized, with lashing eyes welded on at the bottom on both sides. 2 plastic toolboxes, b=600 / h=425 / t=460 mm, lockable. Telescoping extendable by a maximum of 4,000 mm and lockable approximately every 500 mm. Main frame telescoping Locking with pneumatic bolt locking + display of frame locking on both sides, operated via hand knob, operation for brake/locking and suspension on the left side in front of the axles. Storage compartment between the longitudinal beams in the extended state. Axles + Suspension SAF disc brake axles with 430 mm disc diameter. Last axle with trailing arm, with automatic reversing lock via reversing light and additional locking function on the vehicle via hand knob. Axle spacing offset 1310/1410 mm. Air suspension. 1st axle automatic lift axle, also electrically operated from the truck, with start-up assistance. Braking system 2-line compressed air braking system. Spring brake parking brake. 2 non-interchangeable coupling heads at the front. EBS Wabco, electronic braking system with EBS socket at the front. With raising & lowering valve + auto-reset function. Axle load recognition via EBS-CAN bus signal, for display on the display in the driver's cab, truck must be appropriately pre-equipped. Wheels and tires 385/65 R 22.5" steel rims. Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the side. 2 white position lights at the front in LED. 2 white/red side marker lights at the rear in LED. 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front. 1 rotating beacon with bracket, switched via side light. 2 pairs of warning signs, LED illuminated and extendable to 3,500 mm. Flashing side marker lights. Side 7-pin sockets, positioning 2x front panel, 2x support legs, 2x rear end. 1 additional 7-pin socket, in the underrun protection at the rear. 2 additional LED work lights, top inside on the fron

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33901014200, empty load weight: 6,700 kg, maximum load weight: 28,300 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space height: 900 mm, total length: 13,800 mm, total width: 2,550 mm, total height: 2,500 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, color: grey-black, Chassis, Semi-trailer, Logistics Fine-grained steel welded construction, kingpin plate with replaceable 2" kingpin Outer frame slightly angled, new design with "Load-Lock profile" for securing lashing straps 24 tons, 2-speed landing gear, single-sided operation, with straight lower part, without lateral support Free support leg angle or free swivel radius to the rear, approx. 1920 mm 2 support wedges with holder Aluminum side impact protection Steel underrun protection Partial wheel covers in front of and behind each axle Splash flaps in front of the 1st axle and behind each axle with anti-splash protection, according to EC regulations 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable (lock not included) Axles + Suspension SAF drum brake axles "Axle/chassis laser-aligned" to reduce tire wear and fuel consumption Air suspension 1st axle: automatic lift axle, including forced lowering and starting assist function, activated by "3x braking" (starting assist function is operational up to an axle load exceeding 30% and up to a speed of max. 25 km/h) Axle lift below the recommended ride height, therefore no guarantee for tire damage Braking System 2-line compressed air brake system Color-coded line routing for easy maintenance Spring brake parking brake 2 non-interchangeable coupling heads at the front, without connecting cable EBS, electronic brake system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With raising and lowering valve Vehicle - Driving Stability System Wheels and Tires 235/75 R17.5, brand according to the manufacturer's choice Steel rims, factory silver Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red outline lights at the rear 2 x 7-pole and 1 x 15-pole non-interchangeable sockets at the front, without connecting cable Floor Sieve-printed panels, approx. 30 mm thick, for high point load capacity for forklift axle load up to max. 5,600 kg Front wall / corner posts Ksdpfx Asza A Txemtjlw 25 mm aluminum hollow profile, 1,350 mm high, corner posts made of steel in a full-volume design Country of Approval / Signage Germany With DEKRA inspection and certificate (according to §13 EC - FGV) 24/7 service hotline Prepared for single-row license plate holder Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paint Frame DB 7350 Novagrau Front corner posts: hot-dip galvanized Front wall: aluminum

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33902028859, empty load weight: 5,660 kg, maximum load weight: 29,340 kg, overall weight: 35,000 kg, axle configuration: 3 axles, total length: 13,700 mm, total width: 2,550 mm, total height: 3,700 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, color: red, Chassis, Semi-trailer, Transport Company Steel welded construction in reinforced design, only 2 longitudinal members as double T-beams with steel/diamond-plate between the longitudinal members, kingpin plate with replaceable 2" kingpin. Mudguard for tail lights. 8 pairs of lashing eyes screwed or welded to the frame, at the manufacturer's discretion. 24 tons, 2-speed support legs, single-sided operation, with straight lower part, without thrust compensation. Chocks with holder. Aluminum side impact protection. Galvanized steel underrun protection. Half-shell fenders with anti-spray flaps according to EC. 1 spare wheel holder for 1 spare wheel, with wheel fastening kit. 1 storage box recessed between the longitudinal members. 8 pieces of wood rack supports, at the manufacturer's discretion, screwed to the frame, each with 2 extendable wood racks from 1800 to 2800 mm, 7 tons per pair. Axles + Suspension BPW disc brake axles with 430 mm disc diameter. Air suspension with lift and lower valve, safety cable on the axles. 1st axle automatic lift axle, including forced lowering and starting aid, operated by "3x braking" (starting aid is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h). Axle spacing staggered 1410/1310 mm (combined transport) up to 44 tons total weight. Wheels and Tires 385 / 65 R 22.5" at the manufacturer's discretion. Steel rims, factory silver. Braking System 2-line pneumatic braking system. Spring-loaded parking brake. Kljdpfoza Anvsx Amtow Axle load recognition via EBS-CAN bus signal, for display on the dashboard in the cab; the truck must be correspondingly prepared, no truck installation (no calibrated scale). 2 non-interchangeable coupling heads at the front, without connecting cable. EBS, electronic braking system with EBS socket at the front, without connecting cable. Note: The trailer may only be pulled by towing vehicles that ensure the effectiveness of the ABS! "Safe Parking" Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides. 2 white position lights at the front. 2 white/red marker lights at the rear. 2 x 7-pole and 1 x 15-pole non-interchangeable sockets at the front, without connecting cable. Front wall / corner posts Steel / grid front wall, approx. 2300 mm high, screwed to the frame. Approval / Signs Country of approval: Germany. Type approval according to EC 2007/46. Prepared for single-row license plate holder. Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear. Warning sign according to ECE - 70. Paint Frame: DB 7350 Novagrau (dark grey) Support legs: Black coated. Front wall: Hot-dip galvanized.

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33801013475, empty load weight: 7,180 kg, maximum load weight: 28,820 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, color: silver, available in multiple units Kedpsza Aiysfx Amtolw Fine-grained steel welded construction, kingpin plate with replaceable 2" kingpin, additional splash guard riveted to the underside as a sheet of metal, in the neck area above the rear axle of the semi-trailer and above the wheels on the vehicle, frame in reinforced design for vehicle loads up to the outer frame, outer frame with "Load-Lock profile" approximately every 400 mm for securing lashing straps, 10 pairs of lashing rings embedded in the top/outside of the outer frame, each rated at 10 tons, 24 tons. Two-stage support winch, single-side operation, with semi-circular lower part and straight connecting plate, with stroke compensation, folding rear support, support wedges with holder, aluminum side impact protection, steel under-ride protection, quarter panel fenders in front of and behind each axle, with additional sheet metal splash guard above the wheels, with anti-spray flaps according to EC regulations, 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable, container locking system, 4 pairs of locking recesses embedded in the floor for 2 x 20 ft or 1 x 40 ft containers, 4 pairs of container locking adapters, (additional transverse support required at the front and rear of the container, the container must rest evenly over its width in conjunction with the locks, transverse supports are not included in the scope of delivery), attachment rail for loading ramps at the rear extension over the entire width, rear extension mechanical, with hand crank, extendable by approximately 1,500 mm, lockable every 500 mm, including under-ride protection with lighting that can be extended, in the wheel well area with Lohr sheet metal, center with steel diamond plate, storage space for loading ramps integrated in the rear extension, usable only when the rear extension is extended by approximately 1000 mm, for transporting the ramps with the rear extension retracted - storage space for ramps in the FR, located to the right in front of the axles. 1 pair of ramps, 3,000 mm long, 300 mm wide, load-bearing capacity per pair 6,000 kg, electric cable winch, 24 volts, pulling force approximately 8165 kg, mounted centrally at the very front, operated with a wireless remote control, cable length 35 m x approximately 10 mm, with roller cable guide and removable guide rollers. Axles + Suspension: SAF/BPW drum brake axles, at the manufacturer's choice, air suspension, 1st axle automatic lift axle, additionally electrically operable from the truck, including forced lowering and starting aid. Braking System: 2-line pneumatic braking system, color-coded line routing for easy servicing, spring-loaded parking brake, 2 tamper-proof coupling heads at the front, EBS, electronic braking system with EBS socket at the front, without connection cable, with raising & lowering valve with quick vent, holding function in lowered position + auto-reset function, vehicle stability system, axle load recognition via EBS-CAN bus signal. Wheels and Tires: 235 / 75 R 17.5", manufacturer's choice, steel rims in twin arrangement. Electrical System: 24 volts, multi-chamber lights in LED, yellow LED lighting on the side, license plate lighting in LED, 2 white position lights at the front in LED, 2 white/red side marker lights at the rear in LED, 2 x 7-pole and 1 x 15-pole tamper-proof sockets at the front, 2 additional LED work lights at the rear, 1 rotating beacon with holder, switched via parking lights, 2 pairs of warning signs, double LED illuminated and

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33801012811, empty load weight: 6,350 kg, maximum load weight: 28,650 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 435/50 R19,5", tire condition: 100 %, color: silver, available in multiple units Chassis, semi-trailer, forwarding agent: fine-grained steel welded construction, kingpin plate with replaceable 2" kingpin, frame in reinforced design for vehicle loading, outer frame with "Load-Lock profile" approximately every 400 mm for lashing straps, 10 pairs of lashing points recessed in the outer frame at the top/outside, each rated at 10 tons, foldable rear supports, 2 wheel chocks with holder, aluminum side underrun protection, steel underrun protection galvanized, quarter panel fenders in front of the 1st axle and behind each axle, with anti-splash flaps behind each axle, 1 spare wheel holder for 1 wheel, with wheel fastening kit, 2 plastic toolboxes, w=600 / h=425 / d=460 mm, lockable, container locking system, 4 pairs of locking devices recessed in the floor for 2 x 20 ft or 1 x 40 ft containers, the foremost position is a foldable locking device, 10 pairs of stake pockets recessed in the outer frame, internal dimension 70 x 40 mm, 10 stake pockets recessed in the middle of the floor, internal dimension 70 x 40 mm, 2 lashing/stake rails recessed transversely in the floor across the entire width up to the outer frame (max. usable internal width between the outer stake pockets approx. 2170 mm), approx. 100 mm high. With 20 mm round steel strips, top and bottom, distance from top to bottom approx. 60 mm (of the round steel). Bottom with angle plate as a closure, open halfway down. For lashing and inserting stakes 80 x 80 mm. Arrangement: Position 2 and 4 according to Fliegl data sheet, 20 stake pockets, hot-dip galvanized, storage space for aluminum ramps, ramps can be slid in from the rear, 3 pairs of foldable eyelets 10 tons in the outer frame (1 in front of the headboard and 2 in the rear area), Axles + suspension: SAF disc brake axles, air suspension, 1st axle automatic lift axle, including forced lowering and starting aid, operation "3x brake", axle lift below the recommended ride height, therefore no guarantee for tire damage Braking system: 2-line compressed air braking system, color-coded line routing for easy service, spring-loaded parking brake, 2 fail-safe coupling heads at the front, without connecting line, EBS, electronic braking system with EBS socket at the front, without connecting cable, with lifting and lowering valve, 2 ride heights, adjustable via hand control, 1 x for saddle height 980 mm, 1 x for saddle height 1100 mm, ride height in conjunction with lift axle, when the lift axle is raised, the loading or overall height increases by 50 mm, vehicle - driving stability system Wheels and tires: 435/50 R19.5, brand according to manufacturer's choice, steel rims Electrical system: 24 Volt, multi-chamber lights, yellow LED lighting on the side, 2 white position lights at the front in LED, 2 white/red side marker lights at the rear, 2 x 7-pin and 1 x 15-pin fail-safe sockets at the front, LED work lights on the side, 1 on the left and 1 on the right, 2 additional LED work lights at the rear, 1 rotating beacon with holder, switched via parking lights, 2 pairs of warning signs, LED illuminated and extendable to 4000 mm, additional 7-pin socket in the underrun protection at the rear Floor: Sieve plate, approximately 30 mm thick, on longitudinal girders for high point load capacity for forklift axle load up to a maximum of 7100 kg, Kjdpfoza Agrsx Amtslw Front wall / front corner posts: 25 mm aluminum hollow profile, 1350 mm high, corner posts steel in box profile, front wall additionally covered with 1250 mm h

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33802035478, empty load weight: 4,660 kg, maximum load weight: 33,340 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 10,450 mm, total width: 2,550 mm, total height: 1,325 mm, suspension: air, tire size: 385/55 R22.5", tire condition: 100 %, color: grey-black, Chassis, semi-trailer, container Fine-grained steel welded construction, kingpin plate with replaceable 2" kingpin and 2 kingpin positions Front locking on tipper ram mounting with lateral wedge locks, rear locking on continuous pivot shaft with return spring Without subframe for self-supporting containers Container attachments: Locking crossbeam, 2-fold for locking 1 x 30 ft container 24 ton, 2-speed landing gear, single-sided operation, with straight lower part, without push-out compensation Free support leg spacing or free rear swivel radius approx. 1850 mm 2 chock blocks with holder Aluminum side underrun protection Without underrun protection Semi-fender With anti-spray flaps according to EC Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard chrome-plated, with HDK screw fitting, fixed part, NW 48 mm. (without hose connection). Attention! Tilting angle limited! Operation hydraulically via truck auxiliary drive Hydraulic connection with hose and HDK screw fitting NW = 48 mm with knurled nut Axles + Suspension BPW disc brake axles with 430 mm disc diameter "Axle/chassis laser-aligned" Reduces tire wear and fuel consumption Axle spacing offset 1410/1310 mm (combined transport) up to 44 tons total weight Air suspension 1st axle automatic lift axle, including forced lowering and start-up assistance, operation "3x brakes" (start-up assistance is functional up to an axle load exceedance of 30% and up to a speed of max. 25 km/h) Braking system 2-line pneumatic braking system Color-coded line routing for easy maintenance. Kljdozaz Tkspfx Amtew Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line 24 Volt EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! With lifting and lowering valve Vehicle - Driving Stability System Axle load detection via EBS-CAN bus signal, for display on the display in the cab, truck must be prepared accordingly, no truck installation (no calibrated scale) Wheels and Tires 385/55 R22.5" manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front in LED 2 white/red marker lights at the rear 2 x 7-pole non-interchangeable sockets at the front, without connecting cable Country of approval / Signs Germany Type approval according to EC 2007/46 24/7 service hotline Prepared for license plate holder, single row Contour marking with reflective tape according to ECE R 048, white on the side and red at the rear Paint finish Frame DB 7350 Novagrau "10-year warranty against rust" Support legs black coated

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT10401014064, empty load weight: 1,500 kg, maximum load weight: 2,300 kg, overall weight: 3,800 kg, axle configuration: 1 axle, loading space length: 2,000 mm, loading space height: 1,000 mm, total length: 4,300 mm, total width: 2,460 mm, suspension: steel, tire size: 235/75 R17,5", tire condition: 100 %, color: green, available in multiple units Single-axle container trailer Type EPS 38 for diesel generator set installation Chassis: single-axle trailer Fine-grained steel welded construction Generator set attachment by means of screws Support wheel at the front, heavy-duty design, mechanically adjustable in length and foldable downwards 1 pair of 2-speed geared support legs at the rear, with straight lower part, can be operated separately on the left and right Chocks with holder Side impact protection, aluminum, painted in RAL 6031 bronze green, matte finish Under-run protection, steel, painted in RAL 6031 bronze green, matte finish Kodpfx Amszazrtstslw Fenders in front of and behind the axle, with sheet metal cover at the top with anti-splash flaps 2 pairs of lashing points, each 1 pair at the front and 1 pair at the rear, embedded in the cross members, with 3 tons each for securing the trailer, with marking (sticker) 4 pairs of ferry eyes, yellow marked, Lashing point sticker on each lashing point Steel perforated sheet with rosette profile" on both sides, outside next to the generator set, access ladder on the side, on both sides Mounting for 2 x 20-liter fuel canisters on the vehicle frame on the front right Central lashing point sticker Storage box, steel, embedded in the floor at the front, with water drainage holes and lined with perforated rubber mat, with lockable lid, lock not included Coupling device: trailer, single-axle trailer Drawbar with tested pivoting drawbar eye 40 mm / to NATO drawbar eye Drawbar height adjustable via spindle. The nut for the spindle fastening screw at the bottom on the front right Parking sockets for electrical system/EBS and air Axle + Suspension BPW axles, with tapered roller bearing and S-cam brake "Axle/chassis laser aligned" reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearing Wheels and Tires 235/75 R 17.5 according to manufacturer's choice Steel rims, factory silver Braking System 2-line compressed air braking system Spring-loaded parking brake 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle Yellow connection on the front left and red connection on the front right ABS/EBS, electronic braking system with EBS connector at the front, with connecting cable EBS modulator mounted in a protected position Note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Vehicle - Driving Stability System Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides Electrical system in ADR design with certificate 2 white position lights at the front and reflectors 2 white/red side marker lights at the rear 1 x 15-pin socket + 1 x 15-pin spiral cable at the front, removable Approval / Signs Country of approval: Germany with DEKRA inspection and certificate (according to §13 EG - FGV) 24/7 service hotline prepared for license plate holder, single-line Contour marking with reflective tape according to ECE R 048, only at the rear, white Warning sign according to ECE - 70 Painting Frame RAL 6031, bronze green, matte finish Drawbar in the same color as the frame available in multiple units

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT21001013325, empty load weight: 2,500 kg, maximum load weight: 8,000 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 11/2023, loading space length: 5,500 mm, loading space width: 2,050 mm, loading space height: 630 mm, total length: 7,280 mm, total width: 2,550 mm, total height: 2,900 mm, suspension: steel, tire size: 235/75 R17,5", color: blue, The images shown are archive images. The vehicle may still be in use. Chassis: Central axle trailer, low-bed Fine-grained steel welded construction Gearbox support leg at the front Telescopic rear support Chocks with holder Mudguards made of steel sheet over both wheels Side impact protection, aluminum Coupling device for central axle trailer Drawbar with tested 40 mm drawbar eye Drawbar height-adjustable via spindle, max. adjustment range 250 mm Axles + Suspension Euro axles of our choice, with tapered roller bearing and S-cam brake "Axle/chassis laser-aligned" - reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load compensation (rocker arm compensation) Wheels and Tires 235 / 75 R 17.5" according to manufacturer's choice Steel rims, factory silver Braking System 2-line compressed air braking system Spring brake parking brake 2 non-interchangeable coupling heads at the front, with connecting lines to the tractor unit ABS and ALB, with ABS connector at the front, with connecting cable Note: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 1 x 15-pin connector at the front, with connecting cable Bridge TTS Low-lying steel pan, bridge floor made of steel/non-slip steel plate, steel walls solidly welded to the floor Bridge length 5500 mm Pan at the front and side with "Load-Lock profile" for attaching lashing straps (8 pieces at the front, 16 pieces on each side) Note: Slight undulation of the floor may occur due to welding distortion! Pair of lashing eyes, 1 x at the front in the corners of the steel pan and 1 x at the rear in the floor, each 5 tons Additional pair of lashing eyes in the floor, each 5 tons Kedpfx Ajzadb Domtolw Ramps Steel ramps, 2,300 mm long, 510 mm wide, laterally adjustable with handrail on the ramps covered with wood (tip area with steel/non-slip steel plate) with gas spring for single-person operation Operating instructions The specified total weight is technically possible, depending on the cargo, the total weight may not be reached while complying with the permissible axle/support and saddle loads. (Poor handling and tracking behavior possible due to incorrect load distribution) Country of Registration/Signage Country of Registration: Germany with DEKRA inspection and certificate (according to §13 EG - FGV) 24/7 service hotline prepared for single-line license plate holder Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Painting Frame: RAL 5002 Ultramarine Blue Ramps: Hot-dip galvanized The images shown are archive images. The vehicle may still be in use.

Condition: like new (used), functionality: fully functional, machine/vehicle number: WFDFLT21201011556, empty load weight: 3,300 kg, maximum load weight: 8,200 kg, overall weight: 11,500 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 450 mm, total length: 6,900 mm, total width: 2,550 mm, total height: 1,580 mm, suspension: steel, tire size: 235/75 R17,5", color: red, Demonstration vehicle The images are archive images; the vehicle may still be in use! Steel welded construction, continuous tilting shaft at the rear with 80 mm ball bearing, gearbox support at the front, foldable rear support, 2 chock blocks with holder, steel underrun protection, splash guards at the rear across the entire width, quarter panel fenders, spare wheel, same brand as the standard tires, steel rim, loose, 1 plastic toolbox, with insert, w=620/h=360/d=440 mm, lockable with a padlock. (Lock not included) Note: The side panel touches the storage box when folded down. Lockable storage space for loading ramps under the loading area, 1 pair of aluminum ramps, 3,000 mm long, 360 mm wide, load capacity per pair 8,000 kg (mounting rail for ramps at the rear) Drawbar with tested 40 mm tow hitch, drawbar height adjustable via spindle, max. adjustment range 300 mm Klsdjlhpzvspfx Amtew BPW drum brake axles, axles/chassis laser-aligned to reduce tire wear and fuel consumption, parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load compensation (lever compensation) 2-line pneumatic braking system, color-coded line routing for easy maintenance. Hand spindle parking brake, integral air reservoir, ABS and ALB, with ABS connector at the front, with connection cable. Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS, 2 fail-safe coupling heads at the front, with connection lines to the truck 24 Volt, multi-chamber lights, yellow LED lighting on the sides, 2 white position lights at the front 2 white/red outline lights at the rear, 2 x 7-pole fail-safe connectors at the front, with connection cable Three-way tipper, hydraulic multi-piston press with stroke limitation and safety cable, low-pressure cylinder up to max. 170 bar, without throttle. If required, this must be retrofitted on the truck, hydraulic connection with SVK connector NW 10/3, including connection hose Operation hydraulically via truck auxiliary drive Stable tipping bridge with 4 mm steel plate floor, side panel structure made of steel, side walls continuous, foldable and pivotally mounted with central locking at the bottom. Rear corner posts can be plugged in. Rear wall foldable and pivotally mounted, with central locking at the bottom. Platform length approx. 5,000 mm, side walls with 6 hinges at the bottom, platform width 2420 mm 5 pairs of lashing eyes in the floor, each 5 tons Country of registration: Germany, with Dekra approval and certificate (according to §13 EG - FGV), 24/7 service hotline, prepared for single-row license plate holder, contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear The images are archive images; the vehicle may still be in use!

Condition: used, axle configuration: 3 axles, total width: 25,500 mm, total height: 35,000 mm, Year of construction: 2018, Equipment: ABS, = Further options and accessories = - Air suspension rear - Air suspension front = Remarks = For inquiries about the vehicle, Mr. Seidel will be happy to assist you (by phone). Fliegl DTS 300 low loader trailer BPW axles, drum brakes, spring loaded brakes, mechanical ramps, permissible total weight: 24,000 kg, unladen weight: 6,350 kg, payload: 17,650 kg, loading area dimensions: L 8,490 mm x W 2,510 mm, tire profile: 1st axle 7-12 mm, 2nd axle 7-8 mm, 3rd axle 4-7 mm If required, we can provide you with a leasing or financing offer. Mr. Seidel (phone) will be happy to assist you. Further information is available on our website. ... Errors, changes, and prior sale excepted!!! = Further information = Unladen weight: 6,350 kg Payload: 17,650 kg Kodpoy Svrgjfx Amtolw Gross vehicle weight: 24,000 kg Please contact Tobias Ebert for further information.

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33903000211, empty load weight: 7,707 kg, maximum load weight: 27,293 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 10/2023, loading space length: 15,030 mm, loading space width: 2,470 mm, loading space height: 2,655 mm, loading space volume: 101 m³, total length: 15,350 mm, total width: 2,550 mm, total height: 4,005 mm, suspension: air, tire size: 385/55 R22,5", color: silver, The images are archive photos; the vehicle may still be in use! Vehicle consists of: Chassis: Semi-trailer for freight forwarding Fine-grained steel welded construction in lightweight design up to the support legs, fifth wheel plate with replaceable 2" king pin 24 t, 2-speed landing gear, single-sided operation, with a straight bottom section Rear extension ladder Side door holders 2 wheel chocks with holders Aluminum side underrun protection Steel rear underrun protection with wide Fliegl mudflaps Foldable mudguard for the lighting assembly Quarter mudguards Rear impact protection Curtain pole with holder 1 plastic toolbox Axles & Suspension 3 BPW disc brake axles "Axles/chassis laser-aligned" to reduce tire wear and fuel consumption Air suspension Braking system 2-line compressed air brake system Color-coded line layout for easy service Spring-loaded parking brake Duomatic coupling EBS, Electronic Braking System with EBS socket at the front, without connecting cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With lift & lower valve Vehicle stability system AAC Basic, automatic lift axle acting on the rear axle as maneuvering aid, up to 20 km/h, manually switchable Axle load detection via EBS-CAN bus signal Wheels and tires 385/55 R22.5, make at manufacturer’s discretion Electrics 24 volts, multi-chamber lights, side yellow LED lighting Side yellow LED lighting linked to the indicator, 'flashing side marker lights' 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front, without connecting cable SB Hydraulics Hydraulic cylinder with sliding mechanism built into the floor. 2-circuit hydraulic system. Forward/reverse switching is electric via wired remote control. Hydraulic operation via truck PTO Hydraulic connection with hose at the front wall and HDK screw connection Recommended pump performance: Displacement: 110 l/min Pressure: 250 bar Minimum oil tank volume: 100 l Floor boards made of aluminum, 8 mm ribbed profile Aluminum box body from high-quality, wear-resistant material. Front and side walls made of aluminum hollow profiles, top all round welded with a wide special reinforcement profile from aluminum Sliding wall for improved unloading of cargo, with reinforced curtain flaps at the bottom. Rear wall made of aluminum hollow profiles, as two-leaf door, split 1/2 to 1/2, framed all around with a special U-profile with stop and rubber seal, with 2 external locking bars, locked at the top and bottom. Rear wall with mechanical safety lock, operated at the rear on the left in the direction of travel. With swingable cross beam at the top. Standing platform with ladders on both sides Kodpfjy Snmpox Amtslw 3 removable, swingable cross beams for tarpaulin support Roll tarp, can be stowed on one side, with 2 longitudinal tension straps, 3 side tensioning straps with ratchet Operating notices: Special permit required if overall train length exceeds 16,500 mm Country of registration / license plates: Germany With Dekra inspection and certificate (in accordance with §13 EC-FGV) Warning panel 'Long truck' Long truck overall assessment Driver instruction at the Triptis plant for up to 4 persons per truck combination Paintwork: Frame: DB 7350 Nova Grey Body: Natural aluminum Roll tarp: RAL 7035 light grey

Condition: used, machine/vehicle number: WFDFLT33901007921, empty load weight: 9,000 kg, maximum load weight: 26,000 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 06/2018, next inspection (TÜV): 02/2027, loading space length: 15,150 mm, loading space width: 2,480 mm, total length: 15,350 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", color: black, Attention, the images shown are archive photos! The vehicle may currently be in use! Weights and Dimensions: Permissible/technical gross weight: 35,000 / 39,000 kg Permissible/technical payload approx.: 26,000 / 30,000 kg Permissible/technical axle load: 24,000 / 27,000 kg Permissible/technical fifth wheel load: 11,000 / 12,000 kg Unladen weight approx.: 9,000 kg +/- build tolerance Overall length approx.: 13,850 + 1,500 mm Maximum overall width: 2,550 mm Overall height approx.: 3,200 mm Internal length approx.: 13,650 + 1,500 mm Neck length approx.: 4,050 mm Lower deck length approx.: 9,600 + 1,500 mm Internal width approx.: 2,480 mm Loading height, lower deck approx.: 900 mm Coupling height approx.: 1,150 mm Kingpin installation dimension approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Chassis, semitrailer for forwarding operations Fine-grained steel welded construction, fifth wheel plate with replaceable 2" kingpin Lashing rings recessed in outer frame, rated at 2.5 t each 24 t two-speed landing gear, single-sided operation, with straight base, without compensator Chocks with holders Aluminium side underrun protection Steel rear underrun protection Quarter-shell mudguards in front of first axle and behind each axle With anti-spray mud flaps behind each axle Rear impact guard Plastic toolbox with drawer and shelf, w=650 / h=520 / d=670 mm Document box at the front bulkhead Telescoping Central beam frame with neatly welded, interlocking telescopic frame components. Extensible by max. 1,500 mm and can be secured after approx. 1,500 mm; outer frame add-on sections approx. 1,500 mm long, for hooking into outer frame in telescoped state. Locking via mechanical pin system. Axles and Suspension SAF drum-braked axles Air suspension Braking System Dual-line compressed air brake system Kjdpoy Slp Iofx Amtelw Spring-loaded parking brake Two fail-safe coupling heads at the front, without connecting line EBS (Electronic Braking System) with EBS socket at front, without connecting cable Note: This trailer may only be towed by vehicles that can ensure effective ABS operation! With lift & lower valve Wheels and Tyres 235 / 75 R 17.5 Steel rims in twin arrangement, factory silver Electrics 24-volt, multi-chamber lights, yellow LED side marker lighting Two white position lights at front Two white/red lane position lights at rear 2 x 7-pin fail-safe sockets at the front, without connecting cables Rotating beacon with holder, operated via parking lights (beacon removable) Floor Approx. 30 mm thick phenolic ply boards, high point load capacity for forklift axle loads up to max. 7,100 kg Steel/chequer plate covering in wheel arch area where required Front bulkhead/corner posts 25 mm aluminium hollow section profile, 1,950 mm high, steel corner posts, full height for volume version Approval / Signs With Dekra inspection and certificate Prepared for single-line number plate holder Warning sign according to ECE - 70 Contour marking with reflective strips in accordance with ECE R 048, white on sides and red at rear Attention, the images shown are archive photos! The vehicle may currently be in use!

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33903000364, empty load weight: 6,120 kg, maximum load weight: 28,880 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 12/2022, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,800 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", color: silver, Please note: The images are archive photos! The vehicle may still be in use! Weights and Dimensions: Permissible/technical gross weight: 35,000 / 39,000 kg Permissible/technical payload approx.: 28,880 / 32,880 kg Permissible/technical aggregate load: 24,000 / 27,000 kg Permissible/technical fifth wheel load: 11,000 / 12,000 kg Unladen weight (basic version) approx.: 6,120 kg +/- manufacturing tolerance Overall length approx.: 13,800 mm Maximum overall width: 2,550 mm Overall height approx.: 2,388 mm Gooseneck length approx.: 4,050 mm Low bed length approx.: 9,600 mm Loaded loading height in the low bed approx.: 900 mm Internal width approx.: 2,480 mm Coupling height approx.: 950 mm King pin installation dimension approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Chassis Semi-Trailer Forwarder Fine-grained steel welded construction, fifth wheel plate with replaceable 2" king pin Telescoping front low bed extendable by approx. 1,500 mm, lockable every 500 mm Slightly inclined outer frame, new design with 'Load-Lock profile' for attaching lashing straps 'Patented Load-Lock-Cross' for lashing straps integrated in the cross member under the outer frame 24 t, 2-speed landing gear, single-sided operation, with straight lower part, without compensating support Free landing gear corner dimension and rear swing clearance approx. 1,920 mm Aluminum side underrun protection Steel rear underrun protection Quarter-shell mudguards 9 pairs of lashing/rack rails transverse in the floor, embedded up to the main frame, approx. 100 mm high. With 20 mm round steel rails, top and bottom, distance between upper and lower rails approx. 60 mm (of the round steel). Bottom has angle plate, half open downward. For lashing and inserting stakes 80 x 80 mm (3 pairs in the neck, 6 pairs in the low bed section). 3 pairs of stake pockets recessed in the outer frame, approx. 72 x 42 mm internal dimension Axles & Suspension Drum brake axles according to manufacturer specification 'Axle/chassis laser-aligned' – reduces tire wear and fuel consumption Air suspension Brake System 2-line compressed air braking system Color-coded lines for easy service Spring-loaded parking brake 2 error-proof coupling heads at front, without connecting line EBS, Electronic Braking System with EBS socket at front, without connection cable Note: The trailer may only be towed by tractors with functional ABS! With raise & lower valve Vehicle driving stability system Wheels and Tires 235/75 R17.5, manufacturer at discretion Steel rims, factory silver Electrical System 24V, multi-chamber lights, side-mounted yellow LED lighting (recessed) 2 white position lights at front 2 white/red lane marker lights at rear 2 x 7-pin error-proof sockets at front, without connecting cable 1 additional LED work light at rear, operated via reverse light Klodpsy Slhqjfx Amtow Floor Anti-slip phenolic plywood panels, approx. 30 mm thick, high point load capacity, suitable for forklift axle loads up to max. 5,600 kg Front wall / Corner stakes front 25 mm aluminum hollow profile, 1,350 mm high Country of registration / license plates Germany Inspection and certification in Bosnia 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective tape according to ECE R 048, white on sides, red at rear Warning sign according to ECE - 70 Paintwork Frame: Hot-dip galvanized including passivation '15-year warranty against rust-through' Front corner stakes: Hot-dip galvanized Front wall: Aluminum

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT22702011668, empty load weight: 4,800 kg, maximum load weight: 22,200 kg, overall weight: 27,000 kg, axle configuration: 2 axles, first registration: 10/2013, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R19,5", color: red, Attention, the images shown are archive photos! The vehicle may currently be in use! Weights and Dimensions: Gross weight: 27,000 kg Payload approx.: 22,200 kg Aggregate weight: 16,000 kg Stated fifth wheel load: 11,000 kg Tare weight approx.: 4,800 kg +/- manufacturing tolerance Overall length approx.: 13,850 mm Overall width max.: 2,550 mm Overall height approx.: 2,245 mm Platform length approx.: 13,650 mm Platform width approx.: 2,480 mm Coupling height approx.: 950 mm King pin installation dimension approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Chassis - Semitrailer for Forwarding High-tensile steel welded construction, fifth wheel plate with replaceable 2" king pin 13 pairs of lashing rings recessed into the outer frame, each with a 2.5-ton capacity Outer frame with "Load-Lock profile" for lashing strap attachment 24-ton twin-speed landing gear, single-sided operation, straight lower part, without compensating link Wheel chocks with holders Side underrun protection, aluminium Rear underrun protection, galvanized steel Quarter-shell mudguards Axles & Suspension BPW disc brake axles Air suspension Brake System 2-line compressed air brake system Spring-loaded parking brake 2 non-interchangeable couplings at the front, without connecting line EBS, Electronic Brake System with EBS socket at front, no connecting cable Caution: This trailer may only be towed by towing vehicles that ensure effective ABS operation! With lift/lower valve Vehicle stability control system Wheels and Tyres 385/55 R19.5" make at manufacturer's discretion Steel rims, factory silver Electrics 24 volt, multi-chamber tail lights Side yellow LED lighting as deeply recessed as possible 2 white position lights at front 2 white/red lane marker lights at rear 2 x 7-pin non-interchangeable sockets at front, without connecting cables Floor Anti-slip phenolic plywood, approx. 30 mm thick, cross joints with Omega inserts, on longitudinal supports for high point load resistance (for forklift axle load up to max. 7,100 kg) Note: Floor warping due to weather influences possible! Kodsy Sk Szjpfx Amtolw Front Bulkhead / Corner Stakes 25 mm aluminium hollow profile, approx. 1,200 mm high, steel corner stakes in volume design, with 2 "inspection windows" Approval / Signs Country of Registration: Germany With Dekra inspection and certificate 24/7 service hotline Prepared for single-line license plate holder Warning panel according to ECE-70 Contour marking with reflective tape in accordance with ECE R 048, white on sides, red at rear Paintwork Frame: RAL 3002 carmine red Landing gear: Black coated Front wall: RAL 3002 carmine red Attention, the images shown are archive photos! The vehicle may currently be in use!

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT22701003406, empty load weight: 4,800 kg, maximum load weight: 22,200 kg, overall weight: 27,000 kg, axle configuration: 2 axles, first registration: 10/2013, next inspection (TÜV): 01/2027, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R19,5", color: red, Attention: The images are archive photos! The vehicle may currently be in use! Weights and Dimensions: Gross vehicle weight: 27,000 kg Payload approx.: 22,200 kg Kledpfx Aey Sk Rqomtew Axle load: 16,000 kg Stated fifth wheel load: 11,000 kg Unladen weight approx.: 4,800 kg +/- build tolerance Overall length approx.: 13,850 mm Overall width max.: 2,550 mm Overall height approx.: 2,245 mm Platform length approx.: 13,650 mm Platform width approx.: 2,480 mm Fifth wheel height approx.: 950 mm King pin installation dimension approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Chassis Semi-Trailer Forwarder Fine-grain steel welded construction, mounting plate with replaceable 2" king pin 13 pairs of lashing rings recessed in outer frame, each rated 2.5 t Outer frame with “Load-Lock profile” for securing straps 24 t two-speed landing gear, single side operation, with flat base plate, without compensating slide Chocks with holder Aluminum side underrun protection Steel rear underrun protection Quarter-shell mudguards Document box on front wall, left-hand side (mounted slightly sloped) Axles & Suspension BPW disc brake axles Air suspension Braking System 2-line compressed air brake system Spring-loaded parking brake 2 non-interchangeable coupling heads at front, no connecting line EBS, Electronic Braking System, with EBS socket at front, without connecting cable Attention: The trailer may only be towed by tractor units equipped with functional ABS! With lift and lower valve Vehicle Stability Control System Wheels and Tyres 385/55 R19.5” – make at manufacturer’s discretion Steel rims, factory silver Electrics 24 Volt; multicompartment rear lights (3 sets of older Hella lights still available at plant for optional installation); lateral yellow LED markers recessed as far as possible 2 white front position lamps, each protected by 12 mm round bar welded over the top 2 white/red lane marker lights at rear 2 x 7-pin non-interchangeable sockets at front, without connecting cables Floor Approximately 30 mm phenolic plywood, cross joints with Omega insert, laid on longitudinal supports for high point-load capacity, suitable for forklift axle load up to max. 7,100 kg Note: Floor warping due to weather exposure possible! Front bulkhead / Corner posts Approx. 1,200 mm high, corner posts made of volumetric steel Approval / Plates Country of registration: Germany With Dekra inspection and report 24/7 service hotline Prepared for single-line license plate holder Warning panel according to ECE-70 Contour marking with reflective strips in accordance with ECE R 048, white (sides) and red (rear) Paintwork Chassis: RAL 3002 carmine red Landing legs: Black coated Front bulkhead: RAL 3002 carmine red Attention: The images are archive photos! The vehicle may currently be in use!

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT22702018968, empty load weight: 4,000 kg, maximum load weight: 23,000 kg, overall weight: 27,000 kg, axle configuration: 2 axles, first registration: 02/2016, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R19,5", color: red, The images shown are archive photos! The vehicle may currently be in use! 2-axle flatbed semi-trailer Type SZS 270 Mega RH 95 Weights and Dimensions: Perm. / technical gross weight: 27,000 kg Kljdpsy Rxmwefx Amtsw Perm. / technical payload approx.: 23,000 kg Perm. / technical axle load: 16,000 kg Perm. / technical fifth wheel load: 11,000 kg Unladen weight approx.: 4,000 kg +/- manufacturing tolerance Overall length approx.: 13,850 mm Maximum overall width: 2,550 mm Overall height approx.: 2,220 mm Platform length approx.: 13,650 mm Platform width approx.: 2,480 mm Fifth wheel height approx.: 950 mm King pin installation measurement approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Vehicle consists of: Chassis: Spedition semi-trailer frame Fine-grain steel welded construction, fifth wheel plate with replaceable 2" king pin Outer frame with "Load-Lock profile" for lashing strap attachment, note: to attach straps when side walls are fitted, the side walls must be opened! 14 pairs of lashing rings, each rated to 2.5 t 24-t, 2-speed landing gear, operated from one side, with straight base, without equalizer Without support legs Wheel chocks with holder Side underrun protection, aluminium Rear underrun protection, steel Quarter-shell mudguards Axles & Suspension: SAF disc brake axles Air suspension Braking system: 2-line compressed air braking system Spring-loaded parking brake 2 fail-safe coupling heads at front, without connecting line EBS, electronic braking system with EBS socket front, without connection cable Attention: The trailer may only be towed by tractors capable of ensuring the ABS functions correctly! With raise & lower valve Vehicle stability system Wheels and Tyres: 385/55 R19.5” – make according to manufacturer’s choice Steel rims, factory silver Electrics: 24 Volt, multi-chamber tail lights, amber LED side marker lamps 2 white position lights at the front with protective bar 2 white/red lane marker lights at the rear 2 x 7-pin fail-safe sockets at front, without connection cable Floor: Anti-slip phenolic plywood floor approx. 30 mm thick, cross joints with Omega insert, on longitudinal beams for high point load capacity, suitable for forklift axle loads up to max. 7,100 kg Note: Floor warping due to weather influences possible! Front bulkhead/corner posts: 25 mm aluminium hollow profile, approx. 1,350 mm high, corner posts made of steel, high volume design, with “holes” for forklift drivers Approval / Markings: Germany With Dekra inspection and certificate 24/7 service hotline Prepared for one-line license plate holder Warning sign according to ECE-70 Conspicuity markings with reflective tape according to ECE R 048; side in white, rear in red Painting: Frame: RAL 3002 carmine red Landing gear: Black coated The images shown are archive photos! The vehicle may currently be in use!

Condition: used, machine/vehicle number: WFDFLT33902030059, empty load weight: 7,452 kg, maximum load weight: 27,548 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2023, loading space length: 13,460 mm, loading space width: 2,470 mm, loading space height: 2,655 mm, loading space volume: 92 m³, total length: 13,800 mm, total width: 2,550 mm, total height: 4,005 mm, suspension: air, tire size: 385/55 R22,5", color: black, The images shown are archive images; the vehicle may still be in use! Weights and Dimensions: Permissible / technical gross weight: 35,000 / 39,000 kg Permissible / technical payload approx.: 27,548 / 31,548 kg Permissible / technical aggregate load: 24,000 / 27,000 kg Permissible / technical fifth wheel load: 11,000 / 12,000 kg Unladen weight (basic version) approx.: 7,452 kg +/- manufacturing tolerance Overall length approx.: 13,800 mm Overall width max.: 2,550 mm Overall height approx.: 4,005 mm Internal length approx.: 13,460 mm Internal width approx.: 2,470 mm Internal height front approx.: 2,655 mm Internal height rear approx.: 2,853 mm Volume approx.: 92 cbm Fifth wheel height approx.: 1,130 mm King pin installation dimension approx.: 1,640 mm Front corner dimension approx.: 2,040 mm Chassis Semi-Trailer for Forwarding Fine-grain steel lightweight welded construction, up to the landing legs, fifth wheel plate with replaceable 2" king pin. Prepared lashing rings integrated into the floor (max. 13 pairs) 24-ton two-speed landing gear, single-sided operation, straight lower part, without load equaliser Pull-out ladder at rear Door retainers on the sides Wheel chocks with holder Aluminum side underrun protection Steel rear underrun protection with wide Fliegl mud flaps Foldable fender for lighting unit Quarter shell mudguards Rear impact protection Klsdpfx Aewk Dc Remtsw Axles & Suspension BPW disc brake axles Air suspension 1st axle with automatic lift axle, including forced lowering and start assist, activation via triple brake application Brake System Two-line compressed air brake system Colour-coded line routing for easier servicing Spring-loaded parking brake Two fail-safe coupling heads at front, without connecting line EBS, electronic braking system with EBS socket at the front, no connecting cable Wheels 385/55 R22.5" Electrics 24 volt, multi-chamber lights, yellow side LED lighting 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin fail-safe sockets at the front, without connecting cables SB Hydraulics Hydraulic cylinder with sliding unit integrated in the floor. Dual-circuit hydraulics. Note: A dual-circuit hydraulic system is required! Recommended pump capacity: Capacity: 110 l/min Pressure: 250 bar Min. oil tank capacity: 100 l SB Tipper Body Aluminum box-type tipper body made from high-grade, wear-resistant material. Front and side walls made from aluminum hollow sections, welded with a wide special reinforcement profile around the top and a special reinforcement frame at the bottom. Sliding bulkhead for improved unloading of cargo, with reinforced tarpaulin flaps at the bottom. Rear wall made of aluminum hollow sections as a two-leaf door, split 1/2 to 1/2, framed all round with a special U-profile with stop and rubber seal, fitted with two external rotary bar locks, locked at top and bottom. Rear wall with mechanical safety lock, operated at the rear on the left side in direction of travel. Including a swivelling crossbar at the top. Standing platform with ladder access on both sides (left/right in direction of travel) and guardrail for opening and closing the roof tarpaulin Removable, swivelling crossbars for tarpaulin support + tarpaulin support at front bulkhead and at rear wall. Roll tarp can be stored on one side with two longitudinal tension belts, 3 ratchet tension belts on the side. The tarp is fastened with hooks and rubber ropes at the front bulkhead and above the rear doors; features

Condition: used, first registration: 09/2016, color: other, Year of construction: 2016, Equipment: ABS, = Additional options and accessories = - BPW-Assen Kjdpsy Avafofx Amtolw - Drum brakes - Lift Axle = Remarks = Fliegl, 2016, BPW axles, Axle 1 Liftable, Drum brakes = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: used, axle configuration: 3 axles, first registration: 06/2015, color: other, Year of construction: 2015, = Additional options and accessories = - Lift Axle - Steering axle = Remarks = Fly, 2015, BPW axles, Axle 1 liftable, As 3 guided along, Unloaded by means of a sliding wall = More information = Rear axle 1: Lift axle Rear axle 2: Steering = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U Kljdpfx Ajym Dchemtjw - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.