Used Forkardt F 315 for sale (35,841)

Condition: ready for operation (used), Year of construction: 1996, Clamping force: 3150kN, opening force: 10,000daN, closing stroke: 500mm, ejector force/retraction force: 159/82kN, ejector stroke: 120mm, mould height: 300-700mm, platen dimensions: 900x900mm, tie bar spacing: 550x550mm, tie bar diameter: 110mm, injection position: mm, max. injection force: 350kN, injection stroke: 430mm, injection plunger diameter: 50/60/70/80mm, shot volume: 563/811/1103/1441cm³, specific injection pressure: 1783/1238/909/696daN/cm², corresponding projected area: 177/254/347/453cm², max. projected area: 1050cm² at 300daN/cm², operating pressure: 140bar, dry cycle time (DIN 24480): 500, drive motor: 22kW, control: Datacontrol, length: 6900mm, width: 2000mm, height: 2800mm, weight: 14t, operating hours: 77,185h, shot count: at least 1,147,108, however not guaranteed due to a hardware replacement, adjustable opening stroke, with Striko Westofen W455 holding furnace, ABB IRB 2400 (M96/F10) industrial robot, and documentation. An on-site inspection is possible. Hodpfx Asza E Rmeb Tst

Condition: ready for operation (used), Year of construction: 2012, Machining length: 6500mm, equipment: fencing, control cabinet, Hagen & Göbel spindle unit, power: 5.5kW S1/7.9kW S6, speed range: 100 to 6000/min continuously variable, tool holder: SK30/DIN69871 form A, drilling capacity in steel 60/aluminium: 18/20mm, thread in steel 60/aluminium: M14/M16, spindle throat: 150mm, vertically opening protective cabin, pneumatically movable up and down, operation via push button, coolant system emulsion AP3000/6500, delivery rate: 70l/min, tank capacity: 150l, support table with T slot strips size 16, ten clamping cylinders, support surface: 6500x330mm, equipped with ten double acting pneumatic cylinders (50x40), tool changer plate magazine, travelling plate magazine for eight tools, change time: approx. 8 to 10s, max. tool holder diameter: 50mm, max. length for tool holder with tool: 250mm, Heidenhain HR130 handwheel integrated in control housing, chip tray, 6 removable chip drawers, pendulum operation for normal table, protection by light barrier, device for efficient production of series parts, machine table with separating discs for 900mm safety zone, spray mist device, tank capacity: approx. 1l, laser technology, retrofit AP6500 HK laser technology. Control: HEIDENHAIN iTNC530, length: 8000mm, width: 2400mm, height: 2450mm, weight: 4.5t, with documentation. An on site inspection is possible. Hedjzcfi Uopfx Ab Tot

Condition: used, Year of construction: 2013, Twelve machines for food and meat processing are available, including four metal detectors, two derinding machines and one weigh-price labeler, one knife holder washing machine, one separator, one slicer, one meat band saw and one checkweigher. 1) Bizerba GS weigh-price labeler, version: automatic weighing instrument for individual weighing with price printing device. 2) Itec 22560-EL knife holder washing machine, year of manufacture: 2009, conveyor speed: approx. 2.6m/min, cleaning capacity: approx. 14knife holders/min, water tank volume: approx. 270l, max. cleaning water temperature: approx. 43°C, final rinse temperature: approx. 82°C. 3) 2 × Pulsotronic M-Pulse2 InFlex65 compact metal detectors, year of manufacture: 2013, suitable for metal detection in liquid and paste-like products, free product pipe diameter: approx. 57mm. 4) Pulsotronic M-Pulse 2 InFlex 65-3 metal detector, year of manufacture: 2018, suitable for filling machines as well as liquid and paste-like products, product pipe height: approx. 950mm-1250mm, free product pipe diameter: approx. 57mm. 5) Mettler Toledo Safeline metal detector. 6) Cri-Man SM300/50 separator for solid-liquid separation, design: screw press separator, screw speed: approx. 33rpm, screen opening: 0.5mm, throughput: approx. 37m³/h, machine weight: approx. 465kg. 7) Weber ASA 560 derinding machine, year of manufacture: 2003, working width: approx. 560mm. 8) Maja ESM/3550 derinding machine, year of manufacture: 2004, working width: approx. 554mm, cutting speed: approx. 22m/min, machine dimensions X/Y/Z: approx. 986mm/696mm/988mm, weight: approx. 170kg. 9) Bizerba VS 12 F slicer, blade diameter: 350mm, max. slice thickness: 24mm, max. round product diameter: approx. 270mm, max. rectangular product dimensions: approx. 315mm/245mm, blade speed: approx. 266rpm, machine dimensions X/Y/Z: approx. 860mm/770mm/480mm, weight: approx. 48kg. 10) Kolbe meat band saw. 11) Liebel LWS1400 checkweigher, weighing range: approx. 100g-6000g. An on-site inspection is possible. Hodpfx Aozwgiqjb Tst

Condition: new, Year of construction: 2026, functionality: fully functional, load capacity: 10,000 kg, Column lift rotating device, 15 tons lifting capacity, available as a set or individually. 2-sided drive. The machine is offered as a set in synchronized mode or individually. Protec reversing device / positioner Syncrolift. Double column, hand-held remote control, wireless and manual. Column adjustment, 2x electrically powered, available at an extra cost. Lifting capacity 15,000 kg, 360°. Minimum working height: 800 mm. Maximum working height: 1700 mm. Speed: 0.5 rpm. Clamping plate diameter: 900 mm. Rotating motion: 2 x 2.2 kW. Torque: 18,950 Nm. The machine is also offered individually as a mono model (more affordable). Hjdpfx Aex Tig Hob Tst Optional with a universal joint flange (cardan flange).

Year of construction: 2011, condition: ready for operation (used), Max. working length: 2000mm, compressed air supply: 6bar, connected load: 1200W, the machine was hardly used. Hodpfjlc N Spsx Ab Tot

Year of construction: 1997, condition: ready for operation (used), A transfer press line is offered, consisting of a Gräbener double-column transfer press including a feed unit and a Fecker decoiler-straightener combination with strip feed. 1) Gräbener GSET 2-250-280-315 double-column transfer press, year of manufacture: 1997, condition: operational, nominal force: 2500kN, nominal force stroke: 5mm, nominal energy capacity: 45kJ, slide stroke: 315mm, max. stroke rate: 50strokes/min, slide adjustment: 125mm, number of connecting rods: 2, shut height between bolster and slide: 800mm, bolster dimensions X/Y/Z: 2800mm/1150mm/200mm, slide area X/Y: 2800mm/900mm, max. die cushion stroke: 160mm, die cushion force: 88kN, machine dimensions X/Y/Z: approx. 5200mm/2700mm/5450mm, dimensions including sound enclosure X/Y/Z: approx. 7200mm/4700mm/5610mm, weight: approx. 55000kg. 2) Feed unit, condition: partially operational. 3) Fecker decoiler-straightener combination with strip feed, max. load capacity: 3000kg, max. coil outside diameter: approx. 1500mm, strip pass line height: approx. 1240mm, overall height: approx. 2740mm, width of the decoiler section: approx. 1680mm, length of the strip transfer table: approx. 3500mm. Documentation available. Inspection possible by arrangement. Hsdpfx Abjzrhhqe Tot

Condition: used, mileage: 221,500 km, power: 110 kW (149.56 HP), first registration: 09/2024, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, number of seats: 3, total length: 5,932 mm, total width: 2,020 mm, total height: 2,331 mm, loading space length: 3,270 mm, loading space width: 1,780 mm, loading space height: 1,690 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Mercedes-Benz Sprinter 315 CDi - Medium-length, low-roof van (L2H1) with air conditioning, navigation, cruise control, rearview camera and other extras. * 1st owner * Service booklet available, regularly maintained according to manufacturer's specifications * Regular maintenance according to manufacturer's specifications * NEW: TÜV - Upon request, the vehicle will be delivered with a new technical inspection report ----Multimedia & Connectivity Navigation system * Radio with DAB tuner * USB-C ports (3x) * Bluetooth audio * Bluetooth hands-free system Driver assistance & safety Adaptive cruise control * Blind spot assist * Rearview camera * ABS * ESP * Airbags for driver and front passenger * Automatic headlight control * Fog lights Comfort & operation Air conditioning Hodpfx Abjztt Ryo Tot * Multifunction steering wheel * On-board computer * Central locking with remote control * Electric windows * Electrically adjustable exterior mirrors * Electrically foldable exterior mirrors * Keyless start Cab & seats Driver comfort suspension seat * Armrest on driver's seat * 3 seats * Double passenger seat Drive & environment 6-speed manual transmission * Emission standard Euro 6ea * Start-stop function Cargo area & body * Sliding door on the right * Partition * Two rear doors with 180° opening * Wooden floor in the cargo area * Step at the rear cargo area entrance ----Dimensions & weights Wheelbase: 3,665 mm * Variant: L2H1 * Dimensions (cargo area/loading space) L x W x H: 3.27 x 1.78 x 1.69 m * Dimensions (vehicle) L x W x H (in mm): 5,932 x 2,020 x 2,331 mm * Permissible total weight: 3,500 kg * Payload: 1,245 kg * Trailer load, braked: 2,000 kg (No trailer hitch installed) ---- * COC papers available * Registered as a truck - N1 * 2 vehicle keys available * VAT can be shown separately ---- * We speak German and English. Greek: * Financing possible * We will assist you with all registration matters (including customs license plates and short-term license plates) as well as customs formalities * We will gladly provide you with a purchase offer for your vehicle * WEB: * E-mail: ---- Subject to price changes, prior sale, typing errors and errors.

Condition: used, Year of construction: 1981, Table size: 1200 x 1000 mm Table height: 850 mm Swivel range: -5° to +45° Hedpfx Absx It Aue Tot Milling speeds: 3000/4000/5000/6000/8000/10000 rpm Vertical adjustment: 120 mm Tool holder: MK5 Includes: integral stop Includes: 3-roller feed mechanism Weight: approx. 1000 kg Location: Nattheim

Condition: ready for operation (used), Indramat MAC112C-0-KD-3-F / 130-A-0 Permanent Magnet Motor, serial number: 51095, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Hsdpfx Aboi D Iqko Tjt

Condition: new, Siemens, part number 462 000.7033.00, resistor assembly for voltage limiter G 20, unused in original packaging, 100% functional, scope of delivery as shown in the photos. Hjdpsi Edbcjfx Ab Tjt

Condition: used, functionality: not functional, Year of construction: 2007, load capacity: 7,000 kg, lifting height: 4,000 mm, fuel type: diesel, mast type: simplex, construction height: 3,100 mm, fork carriage width: 2,100 mm, empty load weight: 10,784 kg, drive type: Diesel, Diesel forklift Load center: 600 Hedpfx Ajza Iy Deb Tst Mast type: Standard Technical condition: Used for spare parts Front tire type: Superelastic Front tire size: 355/65-15 Rear tire type: Superelastic Rear tire size: 3.00-15 Description: R70-70 - Forklift for spare parts Full cabin Forklift for spare parts

Condition: used, mileage: 43,650 km, power: 110 kW (149.56 HP), first registration: 06/2022, fuel type: diesel, overall weight: 3,500 kg, wheelbase: 3,665 mm, next inspection (TÜV): 06/2028, color: white, driver cabin: other, emission class: euro6, number of seats: 6, construction height: 2,835 mm, working width: 2,020 mm, Equipment: ABS, air conditioning, airbag, central locking, electronic stability program (ESP), immobilizer system, sliding door, soot filter, traction control, Air conditioning system (Tempmatik), 3-button remote control for central locking, exterior mirrors electrically adjustable and heated - both sides, electric window lifts (2-way), driving assistance system: Attention Assist (fatigue detection sensor), multifunction steering wheel, rear view camera, grab handle for sliding door at cargo compartment partition, spare wheel with road tires, windshield wipers with rain sensor, daytime running lights, DAB tuner (digital radio reception), MBUX multimedia system (7-inch touchscreen), Bluetooth hands-free system, Mercedes-Benz emergency call system, heat-insulating glass (windshield with band filter at the top), driver's airbag, passenger's airbag, anti-lock braking system (ABS), electronic stability program (ESP), driver's cab seats: passenger seat with lumbar support, start/stop system, particulate filter, sliding door cargo/passenger compartment right, engine immobilizer, headlight range adjustment, exterior temperature display, paint: ARCTIC WHITE, shelving system, grab handle on rear pillar right, seats in cargo/passenger compartment: 1st row - 3-seater bench, interior trim: air vents on instrument panel, driver's cab seats: driver's seat with lumbar support, combined floor panel, thermal insulation cargo/passenger compartment, wooden floor in cargo compartment, thermal insulation driver's cab, cargo compartment partition between C-pillars, trim in cargo/passenger compartment: wheel arch trim (plastic), parking package with rear view camera, fuel tank with misfueling protection, ceiling light in cargo compartment with door contact, suspension: stabilization level I, ambient lighting in passenger/cargo compartment, driver's cab seats: driver's seat comfort, driver's cab seats: passenger seat comfort, windows in cargo/passenger compartment: - fixed - front left, windows in cargo/passenger compartment: - fixed - front right, jack, all-weather floor mats, step for rear door, mounting rails for roof rack, trim in cargo/passenger compartment: wood, high (up to the roof), seat equipment: comfort headrest - driver's seat, seat equipment: comfort headrest - passenger seat, lashing rails in cargo compartment - side wall at roof frame, rear door (opening angle 270 degrees), lashing rails in cargo compartment - side wall at sill rail, connection strip for electrical connections (driver's seat box), mud flaps front, mud flaps rear, roof lining, cable duct on side wall, cable duct on rear portal, armrest - driver and passenger door, warm air duct to cargo/passenger compartment, folding cover for storage compartment, marker lights on the side, reinforced front axle, entry lights, cargo package dashboard (USB ports and socket 12V connection additionally), spare wheel carrier under frame end including jack, fuel tank lid red, truck registration, permissible total weight 3.5 t, noise reduction measure exterior, automatic activation for headlights, adaptive brake light, communication module (LTE) for digital services, service interval display Assyst, display for windshield washer fluid level, storage compartment below dashboard passenger side, driver's cab seats: passenger seat with armrest, driver's cab seats: driver's seat with armrest, keyless start, child lock, seat belt system with warning system (driver side), seat belt system with warning system (passenger side), storage compartment above windshield, electronic brake force distribution (EBV), brake assistant, driving assistance system: breakdown managem Hsdpfszv Tp Ujx Ab Tjt

Condition: new, Grundfos CM3-4 A-R-G-V-AQQV F-A-A-N centrifugal pump with MG71A-F-B-CMS1B pump motor, serial number: 0839, unused, 100% functional, scope of delivery as shown in the photos. Hjdpfx Abozg Sb Ds Tst

Condition: good (used), Year of construction: 1997, Geared motor, electric motor, three-phase motor, electric geared motor Hedpfx Aozd S Ekob Tot -Manufacturer of gearbox: Bonfiglioli type MVF 49/F -Speed: 50 rpm i= 28 -Manufacturer Motor elsto ES FC 80M4A-40 -Power: 0.55 kW -Hollow shaft: Ø 25 x 80 mm -Protection class: IP 54 -Dimensions: 375/200/H210 mm -Weight: 12.1 kg

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, fuel: diesel, driver cabin: other, gearing type: other, Reversing camera, heated windscreen, hands-free system, 7-inch touch display for bed control, turn assist system, front axle load 8.0 t, axle ratio 2.31, start-up warning system, Apple CarPlay & Android Auto, dark dashboard, attention assist, ComfortPlus equipment package, exterior color Frozen White, tires 385/55 22.5 make Continental / rear axle 315/70 R22.5 make Continental, CB radio antenna, DAB radio, dark interior flooring, ECOTORQ engine – 510 HP, EURO 6e, electric parking brake, electric tipper control, electrohydraulic steering with three driving modes (Comfort, Balance, Direct), ready for alcohol interlock installation, driver’s seat – premium high-grade Alcantara fabric, vehicle model Ford F-Max GEN 2.0, suspension: front leaf, rear air suspension, Ford Ecotorq OD transmission – 16-speed automatic – ratio 14.107–0.823:1, rear axle 13 t, including upper bunk, instrument panel 9-inch color display, Intelligent Speed Limit Assist (ISLA), keyless start, automatic climate control – 3 comfort modes (ECO, Standard, Comfort), LED headlights, multimedia system with 12.4" touchscreen, truck-specific navigation system, new safety assistance systems: "GSR package" (General Safety Regulation), emergency brake signal, premium Alcantara upholstery black, wheelbase/variant 3600 mm, tire pressure monitoring system, spare wheel omitted, steel wheels, fifth wheel coupling with coupling height 1100 mm, entry shoe compartment with rubber seal, sun blind, sun visor, standard mirrors, spoiler package with roof spoiler and side flaps etc., auxiliary air heater, sockets (12V/24V), fuel tanks: 600 + 450 liters (F-Max Series), tanks with side covers, Technology Package 5: automatic high-beam control, active brake assist with pedestrian detection, ACC with stop & go function, active lane keeping assist, USB ports type A and C, hidden step in bumper for window/sun visor cleaning, Voith Retarder VR 115CT. Note Hedoziup Njpfx Ab Tot Despite meticulous checking of all our price labels, errors can still occur. Some may arise from transmission errors in the systems of different platform providers. Mistakes on our part cannot be fully excluded either. Therefore, we wish to point out that all information is provided without guarantee and does not constitute any legal claim. A price declaration cannot be considered a contractual component. If you place special value on a particular feature stated in our listing, please inform us at the time of contract conclusion. Thank you for your understanding!

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Table saw with sliding table TKU 315 - 220 Volt - Blade diameter: 315 mm Hodpfx Aboypm I Ss Tet - Year of manufacture: 1992 Margin scheme (differential taxation) Transport available at extra cost! Due to the age of the used machine, warranty is excluded for commercial customers.

Condition: new, Year of construction: 2026, functionality: fully functional, Edge grinding machine KSO 150 F PRO – NEW Scope of delivery: Grinding belt K 100, 5 x rubber rollers ø25, ø30, ø40, ø45, ø50 mm, 6 x grinding sleeves K80 ø25, ø30, ø35, ø40, ø45, ø50 mm, On-board tool, Miter stop Hjdpsyxqtfjfx Ab Tjt Grinding unit can be swiveled manually using a hand crank, Machine stand made of welded steel, Oscillating grinding belt with separate gear motor, Oscillation can be switched on or off, Grinding platen with graphite coating, Height-adjustable grinding table, Additional table with dust extraction openings, Grinding sleeve attachment with attached work table, Adjustable stops 2 pcs. dust extraction nozzles ø100 mm, Size of work table: 950 x 450 mm, height adjustment 110 mm, 400 V, motor power 2.2 kW, oscillation motor 0.11 kW, Grinding belt length 2640 mm, width 150 mm, Belt running speed 14 m/s, Grinding area length 800 mm, width 150 mm, Oscillation stroke 15 mm, Swivel angle of grinding unit 0-45° Machine size 1750 x 1050 x 1200 mm, Weight 310 kg NEW PRICE, MSRP 11,050 € Available for immediate delivery Transport possible for an extra charge!

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 4,517 h, load capacity: 2,500 kg, lifting height: 122 mm, fuel type: electric, construction height: 1,419 mm, fork length: 1,600 mm, empty load weight: 820 kg, total length: 2,841 mm, drive type: Elektro, construction width: 770 mm, Low-lift pallet truck Load centre: 575 mm Technical condition: good Battery voltage: 24V Battery capacity: 240Ah Battery manufacturer: Jungheinrich Battery type: Lithium-ion Battery year: 2019 Description: Inspection and UVV safety check new Initial lift, tandem load rollers, electric steering, electric brake, tiller operable from all sides, mini display, ISM module Hsdpfxjzhyb Us Ab Tjt

Condition: excellent (used), Year of construction: 2024, Yokogawa WT5000-HG-F Precision Power Analyzer Manufacturer: Yokogawa Test & Measurement Corporation Type: WT5000-HG-F Model: WT5000 Machine Type: Precision Power Analyzer Date of Manufacture: 11/14/2024 For sale is a used Yokogawa WT5000-HG-F Precision Power Analyzer. This high-precision measuring system is suitable for demanding power, voltage, current, and energy analysis in research, development, test laboratories, power electronics, drive technology, and quality assurance. The modular design allows for the flexible use of various measuring elements and offers the highest measurement accuracy for modern testing tasks. Technical Data Model: WT5000 Version: HG-F Date of Manufacture: 11/14/2024 Measuring Modules: 7 slots Configuration: 760903 Current Sensor Elements (as shown in the pictures) Max. Voltage: 1000 V AC Sensor Power Supply: ±15 V DC Mains Connection: 100–120 V / 200–240 V AC Mains Frequency: 50 / 60 Hz Power Consumption: max. 650 VA Interfaces Ethernet (LAN) USB 3.0 USB Front Port GP-IB / IEEE-488 Video Out (XVGA) External Clock BNC Connectors Analog Pulse Inputs Features Large Color Touch Display Front-Side Control Panel Modular Design with Pluggable Measuring Elements 760903 Current Sensor Elements Multi-Channel Power Measurement Data Storage Function USB and Network Communication Rack Mounting Possible Power Cable Accessories as Shown in the Pictures Application Areas Precision Power Measurement Energy Analysis Active, Reactive, and Apparent Power Measurement Power Electronics Electric Motor and Inverter Testing Inverter Testing Battery and Accumulator Tests Automotive Test Laboratory Research and Development Quality Assurance Hedpfx Aszhl D Ieb Tjt Condition Used Optical condition as shown in the pictures. Scope of Delivery Yokogawa WT5000-HG-F Precision Power Analyzer 760903 Current Sensor Elements (as shown in the pictures) Power Cable Mounting Material / Accessories as Shown in the Pictures Scope of delivery includes only the items shown in the pictures. Subject to changes, errors and prior sale.

Condition: used, Year of construction: 1978, cutting diameter 420 mm saw band length 4870 mm cutting width 500 x 250 mm table height 640 mm size of profile - max. 400 x 400 mm cutting speed 40 - 120 m/min saw band length 4870 x 27 x 0,9 mm total power requirement 3,0 kW weight of the machine ca. 0,75 t dimensions of the machine ca. 2,0 x 1,0 x 1,5 m Manual band saw Hydraulic saw blade tensioning Hydraulic workpiece clamping Hydraulic saw frame lift/lower Hodpfezhn T Sox Ab Tet Includes 4 spare saw blades

Condition: used, Year of construction: 2015, Plate feed direction: from operator to the left. Maximum edge band thickness: 3 mm. Minimum workpiece thickness: 8 mm. Maximum workpiece thickness: 60 mm. Minimum workpiece width: 80 mm. Minimum workpiece length: 190 mm. Feed rate: 10 m/min. Heat-up time: 5 min. Edge banding unit: Yes, with 2 milling units. Edge banding tool: Dia-changeable milling cutter. Diameter: 100 mm. Height: 44 mm. Adjustment of the infeed guide: manual. Trimming shear up to: 3 mm. Individual edge feeding: possible. Gluing: Glue contact roller. Miter saw: Yes. Combination unit for flush trimming/chamfering/rounding: pneumatically adjustable. Rounding unit: pneumatically adjustable. Profile drawing blade: pneumatically adjustable. Flat drawing blade: Yes, sensor-controlled. Unit display: on the display. Control type: PLC linear control. Operation: Touch screen. Motor power: 13.8 kW. Drive system: Yes. Extendable roller support: Yes. Protective cover: Yes. Weight approx.: 1550 kg. Extraction diameter: 80/140 mm. Dimensions: 5000 mm. Hodpfxezl Am Is Ab Tjt Storage location:

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 3214, functionality: fully functional, workpiece height (max.): 40 mm, feed rate X-axis: 10 m/min, total height: 1,600 mm, total length: 3,700 mm, total width: 1,445 mm, overall weight: 1,080 kg, TECHNICAL DETAILS Feed speed: 10 m/min Panel thickness: 8 - 40 mm Max. edge thickness: 3 mm MACHINE DETAILS Operating length: approx. 100,000 m Dimensions & Weight Dimensions (L x W x H): 3,700 x 1,445 x 1,600 mm Weight: 1,080 kg EQUIPMENT/FEATURES PLC control including touchscreen Power stop/trimming knife Jointing unit with DIA milling tools Application of hot melt adhesive to workpiece Robust chain drive Upper operator panel, rapid adjustment from operator side Double roller pressure Signal lamp for workpiece feed Quick-heating glue pot, maintenance-free Pneumatic end trimming for edge thicknesses up to 3 mm High-frequency crosscut saw High-frequency milling unit with replaceable cutter heads For radius, straight and chamfer milling Workpiece air blower Integrated collection container for edge material offcuts Hsdpfxjy Hih Re Ab Tjt Extendable support arm on the front side Note: The machine can still be inspected under power until the middle of calendar week 19.

Condition: new, bore capacity in steel (diameter) 28 mm throat 250 mm bore stroke 130 mm morse taper 3 MK table: 380 x 380 mm turning speeds 75 - 3200 U/min thread M16 ST60 column diameter 98 mm engine output 1,1 kW dimensions 800 x 500 x 2000 mm Hedpfxjprfbus Ab Tot weight 210 kg - automatic drill feeds (magnetic clutch) - Height adjustable and angle adjustable table - Movable work table - Integrated cooling system - Powerful engine - 3 hand levers for drilling feed - Safety shield with limit switch - Separate emergency stop - Built-in working lights - Incl. drill chuck 16mm - B16 - Built-in automatic thread cutting.

Condition: good (used), Flange connection, V-flange, pipe coupling, welding reduction, reduction, clapper base, pipe bend, welding elbow, pipe angle, welding T-piece, welding fitting, welding T-piece -Weld T-pieces: 139 pieces -Type: 30 various versions, see photos/parts list Hodpfjq N E N Esx Ab Tjt -Price/tax: complete -Stock: other sizes/types also available, please inquire -Transport dimensions: 1200/800/H400 mm -Weight: 315 kg

Condition: good (used), Power cable, data cable, -Manufacturer: Lapp Kabel, connection cable on cable reel 78 m -Cable reel: Schill IT -Cable: Rubber cable type H07 RN-F 3G1.5 -Cable cross-section: 1.5 mm² 3-pole -Connector plug: see photos -Dimensions: 410/260/H450 mm -Weight: 15 kg Hsdeivumpjpfx Ab Tot