Used Forst Risz 6,3 X 1000 for sale (67,477)

Condition: good (used), Year of construction: 1998, Manufacturer: Henninger Type: ZS-201 Year of manufacture: 1998 Self centerring device Double column slide ways Dressing Unit Tailstock by rack & pinion Eccentric adjustment 0 - 20 mm Large Cone-Stone tooling package Specifications Metric US Standard Isdjvt Tuiopfx Aphsih Minimum workpiece Ø 20 Ø Min. Maximum workpiece Ø 450 Ø Max. Max. product length 1200 mm Speed 18300 Rpm Max. grinding angle 45 - 120 ° Max. workpiece weight 190 Dimensions (estimate) Length 1250 mm Width 1250 mm Height 1900 mm Weight 365 kg Please note: The information on this page has been compiled to the best of our knowledge and belief by us and, where possible, by the manufacturer. The information is provided in good faith but accuracy cannot be guaranteed. Accordingly, it will not constitute a representation and terms of contract. We recommend that you review all important details.

Condition: good (used), overall weight: 2,800 kg, total length: 1,500 mm, total width: 1,000 mm, total height: 900 mm, Manufacturer: CORREA Type: Box Table Year of manufacture: 2006 Specifications Metric US Standard Number of T slots: 8 Pitch from T to T: 150 mm T dimension: 22 mm Number of T-slotted sides: 2 Dimensions (approx. estimate) Iodpfx Apjwp Dn Djhsih Length: 1500 mm Width: 1000 mm Height: 900 mm Weight: 2800 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend you verify all important details.

Condition: new, functionality: fully functional, Year of construction: 2025, 4 double-girder overhead cranes, in new condition rated load: 2 x 6.3 tons Iedez Hmglepfx Aphsih span: 16,560 mm lifting height: 6 m lifting speed: 5 and 0.8 m/min trolley travel speed: 2 - 20 m/min crane travel speed: 3.2 - 32 m/min radio-controlled remote control (tandem operation between the cranes) year of manufacture: 2025 voltage: 400V

Year of construction: 2009, condition: good (used), Roller conveyor, roller track, powered roller conveyor, roller track -Manufacturer: Grenzebach, roller conveyor type RFS with guide -Drive motor: 0.37 kW 76 rpm -Intermediate dimension: 1000 mm -Conveyor length: 1250 mm -Axle spacing: 250 mm -Roller spacing: 250 mm -Rollers: rubberized -Delivery height: adjustable -Lower guide system: Width 830 mm / see photos -Quantity: 1x roller conveyor available -Dimensions: 1440/1190/H970 mm -Weight: 198 kg Iijdpetlzdmjfx Aphjh

Condition: used, Retractable belt post, D83xH1000mm, post yellow, belt yellow/black. · Equipped with a self-retracting belt, providing an effective and quick way to cordon off hazardous areas in production or in the warehouse. · Belt post height 1000 mm, with 4 longitudinal grooves in the aluminum. Iiodpfez Txwwjx Apheh

Condition: good (used), conveyor belt, belt conveyor, transport belt, belt conveyor -Conveyor belt: Conveyor belt stainless steel with mesh belt Iijdovq Iuxepfx Aphoh -Speed: 27 m/min -Conveyor belt width: 420 mm -Conveyor belt length: 1000 mm -Motor: DRdrives 0.18 kW see photo nameplate -Dimensions total: 1010/700/H185 mm -Weight: 36 kg

Condition: good (used), Stop square, locksmithsquare, hair square, precision hair square, control square -Manufacturer: Horex, stop square DIN 875/2 -Type: 1000 x 500 mm -Accuracy level: 2 -Quantity: 5x angle brackets available Iisdpfxex Tn U Ne Apheh -Price: per piece -Dimensions: 1010/500/H50 mm -Weight: 7 kg/pc.

Condition: good (used), Angle bracket, locksmithsquare, flat angle Isdpfx Apjx Tpdlshsih -Flat angle: Leg length 1000 x 660 mm -Number: 2x flat angles available -Price: per piece -Dimensions: 1000/660/H12 mm -Weight: 10 kg/pc.

Condition: like new (used), Plasticizing system Krauss Maffei CX machine screw diameter 50 mm injection volume -432 ccm Ijdpfov R Ucpjx Aphoih injection weight -393 g practically new - used for testing in the tool shop

Condition: used, Year of construction: 1982, machine/vehicle number: 005-5216, Lg.No. 24586 Technical data: - max. working width 1030 mm - max. material thickness 3 mm - bending angle approx. 0 - 135 ° - lockable with end stop - upper beam is operated with a hand crank on the side Iiedpfsv Hc A Nsx Apheh - max. upper beam stroke 120 mm - max. bending beam adjustment 45 mm - bending process is supported by eccentric weight - space requirement approx. W 1750 x H 1120 x D 450 mm - weight approx. 620 kg

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 630005, center height: 305 mm, center width: 1,000 mm, travel distance X-axis: 350 mm, travel distance Z-axis: 1,160 mm, controller model: KELCO 90, TECHNICAL DETAILS Centre height: 225 mm / 305 mm Centre distance: 1,000 mm Travel Z-axis: 1,160 mm Travel X-axis: 350 mm Max. workpiece weight: 200 kg Workpiece diameter: 449 mm Left grinding wheel diameter: 500 mm Left grinding wheel width: 80 mm Left grinding wheel bore: 203 mm Right grinding wheel diameter: 400 mm Right grinding wheel width: 40 mm Right grinding wheel bore: 127 mm B-axis swiveling range: +30° / -190° Max. grinding wheel speed: 1,720 rpm Peripheral speed: 45 m/s Workpiece spindle speeds from: 5 rpm Workpiece spindle speeds up to: 500 rpm Iisdpfx Aeyhnrvophoh Spindle taper: Morse taper 5 (MT 5) Tailstock quill taper: 4 Morse (MT 4) Tailstock quill stroke: 50 mm Feed rate X-axis: 8 m/min Feed rate Z-axis: 16 m/min Max. table tilt: -1° / +11° MACHINE DETAILS Control: KELCO 90 Total power requirement: 25 kW Connection: 50 Hz, 3x 380 Volt Dimensions & Weight Machine dimensions (L x W x H): 2,850 x 2,200 x 2,100 mm Control cabinet dimensions (L x W x H): 550 x 450 x 900 mm Machine weight: approx. 6,000 kg EQUIPMENT 80 mm riser block Coolant system Automatic tool measurement KELSET Wheel dressing device Internal grinding device (without spindle) Set of flanges Set of grinding wheels Balancing arbor Lamp Magnetic chuck diameter (2x): 300 mm / 500 mm Electronic hand-held control panel

Condition: ready for operation (used), Year of construction: 2014, spindle speed (max.): 1,400 rpm, travel distance X-axis: 500 mm, travel distance Z-axis: 2,000 mm, number of axes: 2, Horizontal turning machine manufactured in 2014. This Geminis GT5 G2-1000x2000 features a maximum swing over bed of 1000 mm and a spindle speed of up to 1400 rpm. It also has a distance between centers of 2000 mm and a main spindle hole diameter of 104 mm. If you are looking to get high-quality turning capabilities, consider the Geminis GT5 G2-1000x2000 machine we have for sale. Contact us for further details. • Distance between centers: 2000 mm • Height centers: 500 mm • Max swing over bed: 1000 mm • Max swing over slide: 680 mm • Main spindle hole diam: 104 mm Isdpfx Aozzdwgjphjih Technical Specification Counter Spindle No Driven Tools No

Condition: new, Year of construction: 2026, functionality: fully functional, nominal power: 55 kW (74.78 HP), rotor diameter: 520 mm, rotor width: 1,000 mm, Genox GXC1000 Series - Heavy Duty Granulator suitable for processing various materials including plastics, wood, rubber etc. 75kW Drive Motor with outboard rotor bearings (90kW, 110kW & 132kW drive options are available), heavy duty precision machined rotor, and 520rpm operating speed as standard. 1000mm wide x 520mm diameter cutting chamber with a choice of either a 10 knife, 5 row V Cutting Rotor, or our heavy duty, high inertia Cascade Rotor with 50 x rotor knives. Two rows of counter knives are mounted in the chamber and as an option a third row can be mounted in the throat of the machine to increase cutting efficiency. All knives are manufactured from Vacuum Heat Treated D2 Tool Steel. Hydraulic assisted chamber and screen access with integrated safety interlocks, and a setting jig is supplied for pre-setting of knives off the machine to enable quick, simplified knife changes. Output size is controlled by replaceable screens mounted beneath the rotor shaft - sizes supplied as required (4mm-50mm). A sound attenuation enclosure is available as an option to minimise operational noise if required. We can provide infeed conveyors and product conveying systems as required to transfer product in to bulk storage bags if required. Iedpfsz Ai U Hox Aphoih

Condition: ready for operation (used), Year of construction: 2026, functionality: fully functional, table width: 1,000 mm, table length: 2,000 mm, plate height: 15 mm, TECHNICAL DETAILS Table length: 2,000 mm Table width: 1,000 mm Table top thickness: 15 mm MACHINE DETAILS Material: Hardened metal Dimensions (L x W x H): 2,000 x 1,000 x 500 mm EQUIPMENT 4x 3D angle – 300 mm 6x Stop – 150 mm 6x Stop – 225 mm 1x Protractor 2x Prism 1x Eccentric 1x Flat angle Iodpfx Ajzxcmhjpheih 12x Clamping/tensioning screw 12x Clamp

Condition: used, Material: 1095 High Carbon Steel Tensile Strength: 120,000 PSI Shear Strength: 96,000 PSI Thickness Range: .0045" - .025" Line Direction: Left to Right Cut Width & Thickness .0045" = 1/4" , 3/8" , 1/2" , 3/4" , 1" .0051" = 3/8" , 1/2" , 5/8" , 7/8" .0062" = 3/8" Line Speed: 1500 FPM Entry Strip Width: 18' Traverse Wider Coil Width: 8" Entry Coil ID: 15" - 22" Traverse Winder Coil ID: 11" Exit Coil ID: 16" Entry Coil OD: 54" Ribbon Wound Coil OD: 39" Exit Coil OD: 54" Entry & Exit Coil Weight: 10,000# Traverse Winder Coil Weight: 2250#` Complete Line With: Mandrel Uncoiler Hold Down Roll 3 Leaf Hydraulic Expansion 15 HP Drive Disc Drake Edge Control Unit Iijdpfeztc Tdex Aphjh Peeler Table / Deflector Roll Newcor Strip Welder with Planishing 2 Roll Material: 1095 High Carbon Steel Tensile Strength: 120,000 PSI Shear Strength: 96,000 PSI Thickness Range: .0045" - .025" Line Direction: Left to Right Cut Width & Thickness .0045" = 1/4" , 3/8" , 1/2" , 3/4" , 1" .0051" = 3/8" , 1/2" , 5/8" , 7/8" .0062" = 3/8" Line Speed: 1500 FPM Entry Strip Width: 18' Traverse Wider Coil Width: 8" Entry Coil ID: 15" - 22" Traverse Winder Coil ID: 11" Exit Coil ID: 16" Entry Coil OD: 54" Ribbon Wound Coil OD: 39" Exit Coil OD: 54" Entry & Exit Coil Weight: 10,000# Traverse Winder Coil Weight: 2250#` Complete Line With: Mandrel Uncoiler Hold Down Roll 3 Leaf Hydraulic Expansion Sliding Base 15 HP Motor 15 HP Motor Disc Brake Edge Control Peeler Table / Deflector Roll Newcor Strip Welder with Planishing 2 Roll Bridal Unit for Tension Control Double Roll Tracking Roll for Strip Alignment 2 Sets of Rubber Coated Deflector Rolls Edge Guides Andritz Slitter Head New in 2016 5" Diameter Arbors 12 Sets of Quick Change Tooling Arbors Pre-Packed Arbors Shimless Tooling Anti Friction Bearings 25 HP DC Drive, 1750/2000 RPM Scrap Baller Recoiler 16" Diameter Drum 10,000# Coil Capacity 30 HP DC Drive Hydraulic Push-Off Hold Down Roll 21" Drum Face 1 Arm Exit Turnstile Vertical Strand Separator Aligns Strips after Exiting the Slitter Deflector Rolls 12 Oscillating Recoilers 11" Diameter Drums Hydraulic Push-Off Vertical Edge Conditioners S Bridal Strip Tension Rolls (2) Hydraulic Traversing Oscillating Wheel 7.5 HP Drive 1 Arm Exit Turnstiles Powerflex Digital Drives 755 Allen Bradley PLC Digital Drives Digital Readouts Central Hydraulic Units Operator Push Button Stations Slitter Tooling Hydraulics & Electrics

Condition: ready for operation (used), Year of construction: 1985, LATHE SPA 710x10000 Chuck diameter: 710 mm Max turning over cross slide: 480 mm Distance between centers: 10,000 mm Spindle bore: 105 mm Iedpfx Aowywlkjphoih Main motor: 10 kW Weight approx.: 12 t Video of the machine under power available!

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 5,600 mm, total length: 11,200 mm, total width: 5,100 mm, type of input current: three-phase, warranty duration: 24 months, inner dimension height: 4,970 mm, inner dimension length: 11,000 mm, temperature: 80 °C, inner dimension width: 5,000 mm, air demand: 52,000 m³/h, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), power: 45 kW (61.18 HP), fuel: liquid petroleum gas (LPG), input frequency: 50 Hz, energy consumption: 45 kWh, insulation thickness: 50 mm, nominal power: 250 kW (339.91 HP), sheet thickness steel (max.): 2 mm, Equipment: lighting, * Air Preparation Unit: The air preparation unit is a recirculation system that supplies the cabin with filtered fresh air and exhausts used air during the painting process. It heats the air to 60 °C, mixes the used air with 10% fresh air via an automatic multi-damper system, and reheats the air before routing it back into the cabin. The air is heated using a burner and a heat exchanger, both made of high-quality 304 stainless steel and housed within the fresh air unit. During painting, the air is filtered twice (via front and ceiling filters) before it enters the cabin. The contaminated air is also filtered twice (through inlet and outlet filters) before it exits via the exhaust unit. Air preparation units are insulated like the side walls to minimize heat loss and are protected against potential vibration and noise thanks to rubber seals on the covers. The exhaust air is regulated by a damper in the outlet duct, which helps control the internal pressure of the cabin. * PRINCIPLES OF CABIN OPERATION: The processes in the cabin are controlled via a control panel that manages the following steps: * PAINTING PROCESS: During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled by the extraction unit. Floor filters (paint stops) capture paint particles, and the air passes through the final exhaust filters before being discharged. * FLASH-OFF PROCESS: After painting, the cabin operates for approximately 15 more minutes to purge residual solvents and thinners. During this phase, fresh air from outside continues to circulate in the cabin. * DRYING PROCESS: In this phase, 80% of the air passing through the cabin is heated to 60 °C and supplied to the cabin via a distributor. As 20% of the solvent is released during drying, these solvents are expelled with the exhaust air. Industrial coatings are typically dried at 60 °C, but the cabin temperature can be adjusted via the control panel as required. * COOLING PROCESS: After the 30-minute drying process, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the 5-minute cooling phase, fresh air from outside circulates in the cabin, after which the system stops automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT: These control panels manage the functions and operation of all machinery and devices inside the cabin. The control panel is constructed from durable galvanized sheet metal and steel profiles and is fully enclosed to protect against dust and moisture. Electrical devices and control panels: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control lines between the panel and motors or other electrical devices. • Electrical wiring is designed to allow for cabin relocation if necessary. Iedpfx Ajwzl Hxsphoih • Operating devices use 380 V 50 Hz, while control devices use 220 V.

Condition: good (used), Technical data for pallet rack beam: Iijdpoxaz N Refx Apheh Racking system: META Thyssen Included in delivery: 01x Pallet rack beam, used Material color: silver grey Beam type: HN 140|15 Box profile: 140 x 50 mm Connector: 4 HK (hooks) Clear span: 3,600 mm Max. load per pair of beams: 3,000 kg with evenly distributed load 02x Safety pins, used Design: fully galvanized For securing the horizontal beams against accidental lifting Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only available for collection. If transport or shipping of this item is required, additional costs will be incurred, which can be provided upon request depending on the place of delivery and the scope of supply.

Condition: new, Year of construction: 2025, functionality: fully functional, load capacity: 1,000 kg, table load: 1,000 kg, 3-axis turning and tilting positioner with 1000 kg load capacity, clamping plate diameter 0.65 meters Height adjustment 1000 - 1500 mm Suitable for welding, assembly, processing, etc. With its stable and robust construction, flexible positioning via three axes including overhead, and user-friendly operation, it facilitates welding, assembly, and handling of large workpieces. Iijdpfexbh Dqex Aphjh Optimal positioning of the workpiece improves welding quality and allows higher specified loads in any position. Thanks to the endless rotation of the two rotary axes and additional height adjustment, all workpiece positions (including overhead) are possible. Turntable speed infinitely adjustable from 0.1 to 1.0 rpm. With wireless remote control Rotation range 360° infinite Swivel range 360° infinite Lift: 1000 - 1500 mm Arm outreach radius: 1 meter

Condition: used, 2012 De Gouwe Jacketed Stainless Steel Buffer Tank Iijdpfx Apjwq Slaehoh Jacketed Stainless Steel Year 2012 With ancillary equipment

Condition: new, *IMMEDIATELY AVAILABLE* Includes: Aluminum cover at the front, 1x side panel extension Iisdszy Dp Hepfx Aphsh Equipment: - Steel side panels - 4x lashing eyes - Steel cover Net price: €2,731.09 / Gross price: €3,250.00 Article number: KEB210201011.01 Technical data: • Brand: TPV Trailers • Model: KT-EB2 • Vehicle type: Covered trailer • Vehicle condition: New • Initial registration: No initial registration • TÜV/MOT: 2 years from initial registration • Internal dimensions (LxWxH): 202 x 107 x 106 cm • External dimensions (LxWxH): 308 x 152 x 165 cm • Loading height of the floor: 50 cm • Permissible total weight: 1,000 kg • Unladen weight: 328 kg • Payload: 672 kg • Chassis: Low-loader (wheels next to the body) • Tires: 155/80R13 • Suspension: KNOTT rubber spring axle • Support wheel: Yes • 100km/h approval: Yes DESCRIPTION • Side panels made of 1.5 mm steel sheet with aluminum-zinc coating • with 1x side panel extension • continuous longitudinal beams (3 pieces) • Screen-printed plywood floor, 9mm continuous without joints, non-slip and waterproof • Eccentric locks for the rear door and cover • galvanized V-drawbar • Plastic fenders • Cover made of steel, KTL coated and black powder coated, 56 mm high with roof rails, splash-proof • Cover load capacity: 20 kg open / 75kg closed • 4 lashing loops mounted inside on the floor • maintenance-free rubber spring axle from KNOTT • Wheel shock absorbers mounted • 100km/h manufacturer approval • 2x rear supports mounted • Support wheel with clamping mechanism mounted • 13-pin connector • Large-sized safety lighting • Integrated rear fog light • Lighting recessed in the rear frame _____ Accessories can be retrofitted by our specialist workshop!! - Please feel free to request any specific requirements! _____ - Financing or leasing possible - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or transfer license plates (Germany) can be provided. - Export license plates including customs registration possible Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available for you! We have been Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialist dealer & repair - workshop for over 30 years. - Errors, omissions and prior sale excepted -

Condition: used, turning diameter over bed 1000 mm turning length 3300 mm centre height / mm VDF Boehringer – Conventional Lathe A robust, high-performance conventional lathe from VDF Boehringer is available for sale. The machine features a distance between centers of approx. 3,300 mm and a turning diameter of approx. 1,000 mm, making it ideally suited for machining long and large-scale workpieces. Technical Specifications Manufacturer: VDF Boehringer Machine Type: Conventional lathe Iiedpfxozu Dahs Aphjh Distance between centers: approx. 3,300 mm Turning diameter: approx. 1,000 mm Design: Conventional Steady rest: Not included Robust and durable construction Suitable for machining large and long workpieces Ideal for single-part production, repair work, and general machining tasks The VDF Boehringer is a classic, robust industrial machine, particularly well-suited for companies seeking a high-performance lathe for larger workpieces and demanding machining tasks. Sold as-is (as inspected). Viewing available by appointment. Technical specifications subject to change and provided without guarantee.

Condition: new, Year of construction: 2026, Capacity: 11,000 m³/h Motor power: 11 kW Voltage: 3-phase / 380 V Net/gross weight: 1000 / 1100 kg Dimensions (L x W x H): 3661 x 1160 x 3063 mm Material: Galvanized steel sheet, flowerless, zinc coating: 80 g/m² (both sides) Minimum water flow rate: 40 L/min Minimum required pressure: 1 bar Sound power level: 65 - 75 dB(A) Vacuum: 2800 - 3100 Pa Iiedozx A Ryepfx Aphoh Filtration area: 60 m² Dust container: 618 x 555 x 640 mm (0.22 m²) Safety and ATEX compliance The design has been adapted to work in environments Explosive dust in accordance with ATEX requirements. A robust design and an effective dust extraction system support safe and efficient operation in professional industrial applications. Efficient Sawdust and Dust Removal This vacuum sawdust extractor is designed for the efficient collection of waste generated during the operation of woodworking machines. The system is ideal for extracting sawdust, shavings, and fine dust in workshops and production plants, improving workplace cleanliness and safety. Vacuum Filtration System The device operates using bag filtration technology using negative pressure generated by a powerful fan. Contaminants are transported into the extractor, where larger fractions fall directly into collection containers, while fine dust is retained on the surface of the filter bags. Automatic Filter Cleaning The system is equipped with a vibration filter cleaning mechanism, which helps maintain high filtration efficiency and stable performance. After the device finishes operating, the cleaning process is automatically activated, reducing dust buildup on the filters and improving user comfort. Universal Application The device is primarily designed for use with woodworking machines and machining lines, where effective removal of light production waste and maintaining appropriate working conditions are essential. Fire Suppression System – Water Sprinkler The extractor is equipped with a fire suppression system with a water sprinkler, permanently connected to the fire protection system via a pipeline maintained under constant water pressure. The sprinkler system must be connected to the fire protection system in accordance with the manufacturer's requirements. Explosion-Resistant Plate The extractor is equipped with an explosion-proof plate, designed to increase work safety in environments with dust explosion hazards. This element allows for controlled release of excess pressure in the event of a sudden increase in pressure within the system, reducing the risk of damage to the device and improving dust extraction system protection.

Condition: ready for operation (used), MAHO 40 x 5mm ball screw spindle for MAHO MH 800 C machine - total length: 855mm, used, in good condition, 100% functional, scope of delivery as shown in the photos. Isdjz Syz Iepfx Aphoih

Condition: like new (used), Year of construction: 2008, operating hours: 5,387 h, functionality: fully functional, turning diameter over cross slide: 520 mm, turning length: 1,000 mm, turning diameter: 360 mm, spindle bore: 66 mm, spindle speed (max.): 3,800 rpm, spindle speed (min.): 10 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,000 mm, spindle motor power: 22,000 W, total height: 20,000 mm, total length: 32,000 mm, total width: 27,500 mm, overall weight: 7,500 kg, mount diameter: 40 mm, power: 22 kW (29.91 HP), Equipment: documentation/manual, rotational speed infinitely variable,