Used Frequency Inverter for sale (6,516)

Condition: excellent (used), Here we offer a GRIESER laboratory stand dissolver. Product: Grieser laboratory stand dissolver Type: GFD 11 LST Intended use: The machine is used for mixing powdery solids, liquids, and pastes, as well as for incorporating fillers. The viscosity range can extend from thin-bodied to pasty. Machine design: The laboratory stand dissolver essentially consists of the machine frame, the lifting device, the drive for the mixing tool, the telescopic hood with spring pressure, the chuck, and the control cabinet (non-Ex) with control and compact controller. In the working position, the container (provided by the customer) and the telescopic hood form a closed mixing chamber. A hose connection is provided on the hood, which serves according to the intended use. The drive of the mixing tool is equipped with a speed adjustment via a frequency inverter. The arrangement, power, and speeds of the motors can be found in the attached project drawing. The speed of the mixing tool, the mixing time/remaining mixing time, mixing sequences, and other functions can be displayed on the display of the compact controller. Operation Switching on and off is done via the corresponding buttons in the control cabinet. Lifting the mixing tool drive Lifting is done by switching on the lifting motor. This only runs as long as the push buttons (2-hand safety circuit UP-UP) are pressed. After releasing the buttons, the arm remains at any desired height. Lowering the mixing tool drive To lower the arm, the corresponding buttons (2-hand safety circuit DOWN-DOWN) on the control panel are pressed. Changing the mixing tool The mixing tool shaft is provided with an M8 connection thread. Depending on the requirements, the mixing tool (stirring star provided by the customer) can be unscrewed and replaced. Technical data: Machine type: GFD 11 LST Year of manufacture: 2017 Operating voltage: 400 V Frequency: 50 Hz Control voltage: 24 V DC Mixing tool speed: 25 – 500 min-1 via frequency inverter Ambient temperature: +5°C to +40°C Protection class: IP 54 Container: 1.18 liters, D=100, H=150 (75) provided by the customer Mixing tool: stirring star, provided by the customer Operating panel / display The machine is operated primarily via the compact PLC controller "Vision 560-T25B". This excludes safety-relevant functions such as disconnecting from the mains by the main switch, shutdown in case of danger by pressing the emergency stop button, and the two-hand operation for opening or closing the mixing chamber. The operating panel consists of an illuminated LCD display and foil-covered tactile push buttons. Bjdpfx Aozdtflohmeln The buttons marked with a letter have fixed functions assigned to them. These can be activated at any time, independently of the menu. As soon as a function has been activated, the corresponding status appears in the upper right area of the screen in the "Operating Display" menu. The individual menu screens can be scrolled through using the up and down arrow keys. Type: GFD 11 LST Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: excellent (used), !!!DEMO MACHINE!!! For sale is a Drechselmeister MIDI 3 lathe with a center distance of approximately 400 mm. The machine is in very good condition and has been refurbished and inspected by our specialist personnel. (Fully functional) Technical data: - Center height 190 mm / Turning diameter approx. 378 mm - Center distance approx. 400 mm (extendable with optional bed extensions) - 3 belt stages / speeds: 60 – 1,000 / 150 – 1,900 / 350 – 3,700 rpm - Spindle connection M33 x 3.5 (MK2 taper) with ASR (Euro) drain safety groove Bodpfx Ahozgr Nujmsln - Tailstock with interchangeable quill 100 mm MK2, trapezoidal thread, and scale! (Optional: Interchangeable quill with ER25 collet chuck system for drilling) - Motor 0.7 kW / 1 HP (230 V) with high-quality frequency inverter and “SAFE-START” function - Weight approx. 60 kg The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: Lathe, turning machine, turning center, woodturning lathe, turning, lathe tools, woodturning, machining, machine Reference: R-D1618

Condition: used, functionality: fully functional, conveyor belt length: 3,070 mm, conveyor belt width: 400 mm, Equipment: type plate available, Belt conveyor / conveyor belt / band conveyor Manufacturer: Schunk Fördertechnik GmbH Condition: used Model: Belt, SFT/P50 Total length: approx. 3070 mm Total width including motor: approx. 570 mm Total width without motor: approx. 430 mm Conveyor width / belt width: approx. 400 mm Belt type: smooth Material: steel Frame height: approx. 50 mm Including motor: 0.25 kW Including frequency inverter: TFR 600 HG Including 2 adjustable feet Internal article number: 2026051502 Conveyor technology – reliable and ready for immediate use – The offered conveyor technology was in continuous operation until it was dismantled and is fully functional. Features: • Condition: fully functional, with typical signs of wear • Ideal for efficient and fast material transport • Professionally dismantled and securely packaged for transport Collection address: Industriestraße 5, 47918 Tönisvorst Thanks to the high-quality workmanship, the conveyor technology ensures a smooth and gentle material flow – even under high loads. Tailor-made solutions for your intralogistics Whether roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading – we are your competent partner. We will be happy to support you in the planning, design and implementation of individual solutions. On request, we will create a customized offer for you. Simply let us know your requirements and the local conditions. Benefit from our many years of experience and our strong network of experts. We successfully implement projects for a wide range of industries, including: • Logistics • Pharmaceutical industry Bedpoza Dz Defx Ahmjln • Craft industry • Electronics industry Together we develop economical and sustainable solutions to optimize your material flow. We also offer comprehensive support in the field of automated sorting technology as well as complementary systems such as picking shelves or container solutions.

Condition: used, For sale: a resonator turbine inverter, removed from a Finn-Power L6A CO2 laser. Two units are available. The inverters are in good condition. Manufacturer: KEB combivert Blodpfjy Sz Utsx Ahmen Manufacturer’s code: 0308A757 / 57251, additional code 15.F4.CNE-A001 Revision: V 1.4 PRC laser Price per unit: 400 EUR. If you have any further questions, please do not hesitate to ask.

Condition: ready for operation (used), Lenze 9223_E.2B.20 / 345490 frequency inverter series 9220 SN: 2/7142/2495, used, in good condition, 100% functional, scope of delivery as shown in the photos. Bsdpjy Nrx Djfx Ahmjln

Condition: good (used), Franz Haas Wafer Stick Baking Oven, Model EWB 1/1, completely refurbished. The machine is constructed from ASIS 304 stainless steel (with the main frame made of carbon steel). The oven is equipped with a rotating ring, which has adjustable speed control to achieve the desired baking characteristics for the wafer sticks. The ring has been cleaned and checked (re-aligned), and the supports/bearings are brand new. Fans have been replaced with new units. The exhaust outlet and flange have been replaced for quick installation. The machine comes with two extruders with bushings for ribbon forming and tube diameter shaping. Blodsywgaxspfx Ahmon Equipped with a cutting knife featuring a pneumatic actuator and photoelectric sensor for precise cutting (tube length adjustment is possible). The oven includes a stainless steel batter tank mounted on a frame with a trolley. Fitted with pumps that feed batter from the tank onto the ring surface. Comes with a new control panel and a new gas pressure regulator. Speeds of the ring and pumps are adjustable via frequency inverters. Dimensions: length 3200 mm, width 1400 mm, height 1700 mm. The machine is powered by natural gas, high-methane type, symbol E (previously GZ 50). Electrical requirements: 3x400V / 16A, consumption approx. 2.5/3 kWh. The machine has undergone a complete overhaul. All thermal elements have been replaced with new, environmentally-friendly components—resulting in lower gas consumption and enhanced efficiency. Output: approx. 120-150 kg per 8 hours.

Year of construction: 2026, condition: new, NEW MACHINES We have a large selection of new pallet inverters and pallet changers, both mobile and stationary models. We have machines for all types of products that need to be turned or replaced pallets. Semi-automatic or fully automatic. We deliver and install throughout the EU. Bjdohmfctepfx Ahmoln

Condition: like new (used), Year of construction: 2023, functionality: fully functional, pressing force: 100 t, operating speed: 75 mm/s, table height: 1,000 mm, throat depth: 1,000 mm, total length: 4,450 mm, total width: 1,820 mm, total height: 2,650 mm, overall weight: 7,900 kg, controller manufacturer: Lenze, working width: 3,060 mm, bending force (max.): 100 t, back gauge: 1,000 mm, back gauge travel distance R-axis: 150 mm, back gauge travel distance Z-axis: 1,000 mm, distance between stands: 3,200 mm, warranty duration: 6 months, control type: CNC control, number of support arms: 2, back gauge adjustment: CNC-controlled, number of axes: 6, actuation type: electric, Equipment: CE marking, documentation/manual, foot remote control, safety light barrier, SafanDarley edge bending machines are innovative and highly efficient sheet metal processing machines from the Dutch manufacturer. Their bending precision and reliability have been highly appreciated by users in Poland and worldwide. The SAFANDARLEY E-Brake edge bending machine features an electric drive. Lenze servomotors, controlled by frequency inverters from the same manufacturer, enable fast and reliable operation of the system for many operating hours. Additionally, the machine consumes electrical energy only during the downward movement of the slide. The slide returns to its original position using the force generated by springs. Even when the machine is idle, it practically does not consume electrical energy because the system does not have a pump, as is the case with hydraulic presses. We estimate that the electrical energy consumption is 70% lower than in conventional hydraulic presses. SAFANDARLEY servo-electric edge bending press, model E-Brake Press force: 1000 kN (100 tons) Slide stroke: 300 mm Opening: Q=590 mm Bsdsr Ndxqopfx Ahmjln Upper beam lowering speed: 75 mm/s Upper beam accuracy: +/- 0.01 mm Maximum speed of the back gauge fingers: 350 mm/s Maximum reach of the back gauge fingers (third point of support, reach in the X-axis): 1000 mm Back gauge range in the R-axis: 150 mm Connected power: 11 kW Weight: 7900 kg Machine width: 4550 mm Machine depth: 1820 mm Machine height: 2510 mm Power supply: 3/N/PE 50 Hz – 400/230 V Servo-electric drive (without a hydraulic system) Power transmission via belts CNC-controlled axes: Upper beam: CNC axes: Y1-Y2 Back gauge: CNC axes: X-R-Z1-Z2 Hydraulic upper clamp: WILA Machine inspection and testing are possible.

Condition: like new (used), Four-side planer REX HOMS-410 – German-made – Suitable for wet wood TECHNICAL SPECIFICATIONS: Max. planing width: 410 mm Planing height (two-sided): 200 mm Planing height (four-sided): 200 mm Spindle diameter: 40 mm Cutterhead motor power: 2 x 11 kW Spindle motor power: 2 x 5.5 kW Feed speed: steplessly adjustable Feed speed adjustable via frequency inverter Three upper feed rollers Three lower feed rollers Two auxiliary rollers on the worktable Brake Minimum workpiece length: 450 mm Bjdporwl Dbjfx Ahmoln Machine dimensions (L/W/H): 250 / 220 / 180 cm Weight: ~3500 kg

Condition: used, Thread rolling machine ORT RP30U 2-roll 30 ton swiveling heads variable speed drive #1331 Under power in our warehouse in Gussago BS. Test run possible M i m u Machine Tools Italy Rolling is a mechanical process without chip removal that can be performed cold or hot, having as a purpose the improvement of the surface finish (therefore the fatigue behavior Bodpfst H Ty Uex Ahmeln Power (Ton): 30 Number of rollers: 2

Condition: new, Year of construction: 2026, Continuous/Normal drilling capacity (mm) 20/23 (in E335/ST60) Thread cutting capacity (dependent on pitch) M12 Spindle MK II Spindle speed (stepless): 40-4000 rpm Drilling depth (mm) 100 Overhang (mm) 240 Column diameter (mm) 82 Usable work surface (W x L) (mm) 340 x 280 T-slot size (arm), spacing (mm), width dimension (mm) Number 2, 125, 13/26 Speed display Digital Drilling depth display Digital Drilling depth stop: quick-adjusting stop ring Feed (mm/revolution) Manual Table height adjustment with rack and pinion Motor, three-phase 400V with frequency inverter (kW) 1.5 Distance spindle/work surface (mm) 160 – 880 Machine dimensions without packaging (mm) 355 x 705 x 1825 Machine dimensions with packaging (mm) 572 x 936 x 2142 Weight (kg) 195 Standard accessories: Thread cutting device Control panel with OLED display Robust, high-quality drilling head cover with ergonomically angled front LED lighting Quick-adjusting and ergonomic drilling depth stop Blodpfx Aheir Ir Tsmjn Stepless speed control via central rotary knob EMERGENCY STOP button Thermal overload protection Spindle stop Drill protection with electrical fuse Connection cable with CEE plug Optional accessories Drilling set 3 consisting of: - Machine vice [felix] 2.0 100 mm - Quick-change drill chuck 3-16 mm (accuracy 0.17 mm) - Tapered arbor MK 2 B18 and reducing sleeve MK 2 to Mk 1 €485.00 3-year warranty for single-shift operation Delivery free to your door (only Germany) NOT THE RIGHT MACHINE? WE ARE A FLOTT SUPPORT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Year of construction: 2026, condition: new, functionality: fully functional, New machine with a 24-month warranty Stainless steel model Advantages: + Mobile unit with locking castors + Completely made of stainless steel + For the production and preparation of pastry dough, baking cream, chocolate, fondant, fruit jam, coatings, fillings, as well as for any product requiring uniform heating and mixing + Thermal oil circulates in the double-walled tank, designed for safe and easy use + Triple-walled construction for optimal thermal insulation + With side and bottom scrapers + Electronic thermostat for setting the cooking temperature + Manual / automatic operation possible + Digital temperature display with timer + The tank can be easily tilted for emptying via a handwheel (optional: with a drain tap) + Two working speeds + Safety switch in case of overheating SPECIAL optional accessories, available at an extra cost: - Drain tap for quick and easy emptying: + €880.00 net - Machine with frequency inverter for stepless stirring speed: + €1,115.00 net - Double mixing tool for particularly homogeneous mixing: + €725.00 net - Higher temperature (instead of 150 °C, up to 180 °C possible) + €900.00 net Technical data: - Capacity: 30 liters Bodpfx Ahjivdnvemsln - Max. temperature: 150 °C (optional up to 180 °C) - Thermal oil volume: 12 liters - Heating power: 4 kW - Motor power: 0.37 kW / 0.45 kW (1st / 2nd speed) - Connection values: 400 V - 3Ph - 50Hz - 16A CEE plug - Dimensions: 960 x 725 x 1530 mm (W x D x H) - Filling height: 1100 mm - Net weight: 121 kg

Year of construction: 2026, condition: new, functionality: fully functional, New machine with a 24-month warranty Stainless steel model Advantages: + Mobile unit with locking castors + Completely made of stainless steel + For the production and preparation of puff pastry, baking cream, chocolate, fondant, fruit jam, coatings, fillings, as well as for any product that requires even heating and mixing + Thermal oil circulates in the double-walled tank, designed for safe and easy operation + Triple-walled construction for optimal thermal insulation + With side and bottom scrapers + Electronic thermostat for adjusting the cooking temperature + Manual / automatic operation possible + Digital temperature display with timer + The tank is easily tilted for emptying via a handwheel (optional: with a drain tap) + Two working speeds + Safety switch in case of overheating SPECIAL accessories, optionally available at an extra cost: - Drain tap for quick and easy emptying: + €880.00 net - Machine with frequency inverter, for stepless mixing speed: + €1,115.00 net - Double mixing tool, for particularly homogeneous mixing of products + €815.00 net Blodpfeivduiox Ahmen - Higher temperature (instead of 150 °C, up to 180 °C possible) + €1,000.00 net Technical data: - Capacity: 80 liters - Max. temperature: 150 °C (optional up to 180 °C) - Thermal oil volume: 19.5 liters - Heating power: 10 kW - Motor power: 0.6 kW / 0.8 kW (1st / 2nd speed) - Connection values: 400 V - 3-phase - 50 Hz - 32A-CEE plug - Dimensions: 960 x 740 x 1635 mm (W x D x H) - Filling height: 1270 mm - Net weight: 158 kg

Year of construction: 2026, condition: new, functionality: fully functional, New machine with a 24-month warranty. Stainless steel model. Advantages: + Mobile unit, with locking castors + Completely made of stainless steel + For the production and preparation of pastry dough, baking cream, chocolate, fondant, fruit jam, glazes, fillings, as well as for any product requiring uniform heating and mixing + Thermal oil circulates in the double-walled tank, designed for safe and easy use + Triple-walled construction for optimal thermal insulation + With side and bottom scrapers + Electronic thermostat for setting the cooking temperature + Manual/automatic operation possible + Digital temperature display with timer + The tank can be easily tilted via a handwheel for emptying (optional: with a discharge tap) + Safety switch in case of overheating STANDARD accessories, already included in the price: - Discharge tap for quick and easy emptying - Machine with frequency inverter for stepless stirring speed OPTIONAL accessories, available at an extra cost: - Double mixing tool, for particularly homogeneous mixing + €950.00 net - Higher temperature (instead of 150 °C, up to 180 °C possible) + €1,900.00 net Bodpfx Aeivdumshmeln Technical data: - Capacity: 120 liters - Max. temperature: 150 °C (optional up to 180 °C) - Thermal oil volume: 29 liters - Heating power: 15 kW - Motor power: 1.8 kW (variable speed) - Connection values: 400 V - 3Ph - 50 Hz - 63 A-CEE plug - Dimensions: 1120 x 905 x 1820 mm (W x D x H) - Filling height: 1380 mm - Net weight: 232 kg

Condition: new, Year of construction: 2026, Motor, three-phase, 400V with frequency inverter (kW) 4.0 Table dimensions (mm) 600 x 600 Cutting width (mm) 400 Cutting height (mm) 390 Cutting speed (m/min) 50 – 1000 Saw band dimensions (mm) 3600 x 13 x 0.9 Machine dimensions without packaging (mm) 2225 x 1120 x 770 Weight (kg) 465 Standard equipment Precise drive controlled via a frequency inverter Digital speed display Continuously variable belt speed Balanced band pulleys Hard rubberized running surfaces Hardened and ground guide jaws LED work light Height-adjustable guide arm Machine color RAL 7005 / RAL 7035 12 months warranty for single-shift operation OPTIONAL, article no. 410.020 Machine price € 15,450,- including minimum quantity lubrication and length stop DELIVERY: FREE DELIVERY (within Germany) NOT THE RIGHT MACHINE? Bjdpfeir Ey Ijx Ahmjln WE ARE A FLOTT SUPPORT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Condition: good (used), Basic - feed-in unit, feed-in module, inverter, frequency converter, frequency transformer, drive inverter, controller, variable speed drive -Type: BUS622-15/22-54-0-000 -Input: DC 540 V/640 V -Output: 3AC 360V/425V 3x15A 0-300Hz -Number: 3x servo power units available -Price: per piece Bledpfx Asd Ndi Hshmsn -Weight: 7.3 kg

Condition: good (used), Danfoss VLT Aqua Drive inverter FC-202P45KT4E20H1XG 131H3207 45kW 3x380-480V Item condition: Used 55kg More items - new and used - you can find in our store! Bjdpjpugkzjfx Ahmeln International shipping costs on request!

Condition: good (used), Frequency converter, frequency inverter, drive converter, controller, variable speed drive, servo controller, control, converter, PLC control, supply unit, converter, power module, U/E module -Manufacturer: Siemens, Sinamics servo controller Bodpepvqyrjfx Ahmsln -AC Drive: Type G110 CPM110 AIN 6SL3211-0AB15-5UA1 -Number: 2x module available -Price: per piece -Dimensions: 150/90/H140 mm -Weight: 0.9 kg/piece

Condition: ready for operation (used), Regatron FR 1002 frequency inverter, serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Bsdpfsi Ecmljx Ahmoln

Condition: new, workpiece weight (max.): 30 kg, rotor diameter: 700 mm, The BALANCING MACHINE 9A713 is a universal horizontal-axis balancing machine designed for light rotors up to 30 kg in various configurations. This series incorporates innovative technical solutions, ensuring that balancing is straightforward and accessible. With high performance and functionality, the 9A713 is popular in manufacturing across multiple industries. Originally designed for small series and individual production, its versatility and productivity have also made it a favorite in various repair shops. HIGHLIGHTS • High balancing accuracy 0,4 gmm/kg = 0,4 µm • Advanced Rollers: Specially designed rollers with advanced grinding technology mounted on precision bearings. • Bearing Design Options: Hard-bearing design suitable for small rotors, with optional soft bearing support available. • Belt Drive System: High degree of belt tensioning repeatability with a micro-tuning function for precise belt tension adjustment. • Quick Changeovers: Easy access to support rollers for quick rotor reinstallation and rapid replacement of roller units with prism units, significantly reducing changeover time. • Versatile Rotor Balancing: Capable of balancing rotors with small distances between bearing journals, limited only by the drive belt width. • Variable Speed Control: Frequency inverter asynchronous electric drive with a powerful motor for infinitely variable speed control and smooth acceleration/deceleration. • Height-Adjustable Supports: Adjustable supports to accommodate different bearing journal diameters, aiding in centering the workpiece. • Easy Installation: Requires no special foundation and can be installed on a standard concrete floor. MEASUREMENT AND CONTROL • We make balancing easier - the main advantage of our balancing systems. • The balancing process is displayed in real time and the unbalance behaviour of the rotor is monitored on the screen to achieve the best possible result. • The maximum sensitivity of the machine at any moment of operation, the set-up and calibration of the machine is carried out by the operator himself. • Free from the influence of external vibration factors on the measurement result, it has a high degree of protection against various types of interference. • Easy to learn working skills and maintenance for any employee. Bedpjtu Ukasfx Ahmeln SPECIFICATIONS Weight range of balanced rotors 0.3 - 30 kg (60 kg) Maximum rotor diameter (above the bedding) 700 mm Distance between centres of rotor supports 10 – 700 mm Support type Rollers + Prisms Transmission element for rotor rotation Belt Minimum achievable residual specific unbalance 0.4 g*mm/kg Rotor speed range 300 – 2000 rpm Electric motor power 0.75 kW Parameters of the supply network 380V, 3 Ph, 50Hz Do you need a machine for a different load capacity, diameter or length? We manufacture balancing machines for every needs. Please contact us to get the best offer! 👇

Year of construction: 2025, condition: new, Capacity up to 2000 kg/h Mill motor 3,0kW Elevator motor 0,37 kW Stepless speed regulation with frequency inverter Automatic start-stop-function for the elevator controled by 3 member sensor in the hopper from the following machine (press, mashpump,..) Stainless-steel construction on 4 wheels (2 tractable, 2 fixed roller) Dimensions: (lxwxh) 3100x675x2200mm weight: 230kg Fold-away sorting table integrated Bsdpfs Hmtdex Ahmsln Central wastewaterdrain on the bottom (ø75mm)

Condition: good (used), Year of construction: 2016, functionality: fully functional, cooling capacity: 254.6 kW (346.16 HP), type of input current: three-phase, type of cooling: air, overall weight: 2,498 kg, input voltage: 400 V, total width: 2,300 mm, total length: 3,650 mm, total height: 2,350 mm, warranty duration: 6 months, Aircooled chiller TRANE CGAM090 254.6 KW Cooling capacity: 254.6 kW / 72.39 tons (12/7 — 35°C) Year of manufacture: 2016 Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 2 pcs. TRANE CSHN315K0BKM (scroll) + 2 pcs. TRANE CSHN250K0BKM (scroll) Type of refrigerant: R410А Number of fans: 8 pcs. (2 pcs. frequency inverter driven) Dimensions: 3.65x2.3x2.35 m. Weight: 2498 kg. Working hours: 8866/8858/7036/7022 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS Bledozxny Hepfx Ahmen The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2021, functionality: fully functional, cooling capacity: 159 kW (216.18 HP), type of input current: three-phase, type of cooling: air, overall weight: 2,071 kg, input voltage: 400 V, total width: 2,240 mm, total length: 3,050 mm, total height: 2,500 mm, warranty duration: 12 months, heating capacity: 160 kW (217.54 HP), Aircooled chiller/Heat pump YORK YMPA0160PE50 159 kW/160 kW Cooling capacity: 159 kW / 45.21 tons (12/7 — 35°C) Heating capacity: 160 kW / 45.5 tons (40/45 —7°C) Year of manufacture: 2021 Options: Heat pump. Hydraulic module Refrigerant circuit: 3 pcs. Heat exchanger: 2 pcs. Plate Condenser: Copper / Aluminum Bsdpszwutdsfx Ahmjln Compressors: 4 pcs. COPELAND ZP143KCE-TFD-423 (scroll) + 1 pcs. HITACHI DC80PHDG-D1J2 (scroll, inverter) Type of refrigerant: R410a Number of fans: 3 pcs. (EC-fans) Hydraulic module: 1 pcs. water pump Wilo (Frequency inverter) Dimensions: 3.05x2.24x2.5 m. Weight: 2071 kg. Working hours: 0/0/0/0/0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2025, functionality: fully functional, cooling capacity: 330.4 kW (449.22 HP), type of input current: three-phase, type of cooling: air, overall weight: 2,955 kg, input voltage: 400 V, total width: 2,350 mm, total length: 5,200 mm, total height: 2,450 mm, warranty duration: 12 months, Aircooled chiller CLIVET WSAT XEM 120.4 330.4 KW Cooling capacity: 330.4 kW / 93.95 tons (12/7 — 35°C) Year of manufacture: 2025 Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube Condenser: Copper / Aluminum Compressors: 4 pcs. Copeland ZP385KCE-TWD-522 (scroll) Type of refrigerant: R410А Number of fans: 6 pcs. (Frequency inverter) Dimensions: 5.2x2.35x2.45 m. Bljdpozw Ayfefx Ahmjn Weight: 2955 kg. Working hours: 0/0/0/0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2025, functionality: fully functional, cooling capacity: 101 kW (137.32 HP), type of input current: three-phase, type of cooling: air, overall weight: 796 kg, input voltage: 400 V, total width: 1,180 mm, total length: 2,760 mm, total height: 1,810 mm, warranty duration: 12 months, Aircooled chiller CLIVET WSAT XEE 402 101 KW Cooling capacity: 101 kW / 28.72 tons (12/7 — 35°C) Year of manufacture: 2025 Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. Сopeland ZP293KZE-TED-456 (scroll) + 1 pcs. Сopeland ZP182KCE-TFD-455 (scroll) Type of refrigerant: R410а Number of fans: 2 pcs. (Frequency inverter) Dimensions: 2.76x1.18x1.81 m. Weight: 796 kg. Working hours: 0/0 h. Blodpfxozxqmcs Ahmsn Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.