Used Fume Hood for sale (1,174)

Condition: new, 1860 m³/h Pressung 2.900 Pa 1,1 kW filter surface area 10 m² 72 dB(A) 400/50 V/Hz 665 x 820 x 1365 mm 165 kg mobile extraction, welding fume extraction (manual cleaning by loss of pressure) - Hose arm 3 m, joints inside - Filter cartridge: dust class M - Particle pre-separator: baffle plate - Current type: 3Ph+N+PE Podpfx Agskm Ryns Djgk The filter system ----- The mobile filter system of the type StrongMaster IFA is particularly suitable for Welding work with unalloyed and alloyed steels, galvanized material and Aluminum in case of heavy smoke development. She corresponds to the Safety requirements for devices in the welding fume class "W3" (high-alloy steels with alloy components > 30% nickel-based alloy). When used as intended, the system can be used for be used in the recirculation mode, since the requirements for the Exceptions according to TRGS 560 are fulfilled. The filter will via a maintenance door using a compressed air gun from the clean air side cleaned. The cleaned particles fall into a dust collection drawer from the they can then be disposed of. The powerful scroll fan ensures a high volume flow even with saturated filter cartridges. The filter media ----- A baffle serves as a pre-separator for coarse particles. The filter cartridge installed below (dust class M, degree of separation > 99%) filters the finest smoke and dust particles. The cartridge is factory coated which increases the service life. The extraction arm ----- The extraction arm can be moved with the 3 internal joints Position spring support slightly and is in the set position cantilevered. A throttle flap integrated in the extraction hood enables the Flow rate setting.

Condition: new, 1860 m³/h Pressung 2.900 Pa 1,1 kW filter surface area 10 m² 72 dB(A) 400/50 V/Hz 665 x 1100 x 1495 mm 200 kg - Hose arm 3 m, joints inside - Filter cartridge: dust class M - Pre-filter: baffle plate - Current type: 3Ph+N+PE The filter system ----- The mobile filter system of the Cartmaster IFA type is thanks to the automatic Cleaning particularly suitable for welding work with unalloyed and alloyed steels, galvanized material and aluminum with heavy smoke development. It corresponds to the safety requirements for devices Welding fume class "W3" (high-alloy steels with alloy components > 30% Nickel-based alloy).If used as intended, the system can be used for the Recirculation mode used because the requirements for the Exceptions according to TRGS 560 are fulfilled. That special developed, dirt-dependent cleaning system ensures a good cleaning behavior of the filter cartridge, so that an optimal suction performance is guaranteed throughout the operation. The cleaned particles fall into a dust collection drawer from which they can then be disposed of. The powerful spiral fan ensures even with saturated Filter cartridges for a high volume flow. The filter media ----- A baffle serves as a pre-separator for coarse particles. The filter cartridge installed below (dust class M, degree of separation > 99%) filters the finest smoke and dust particles. The cartridge is factory coated which increases the service life. Pgsdpjhp S Trofx Ag Djk The extraction arm ----- The extraction arm can be moved with the 3 internal joints Position spring support slightly and is in the set position cantilevered. A throttle flap integrated in the extraction hood enables the Flow rate setting.

Condition: used, functionality: fully functional, Mettler Toledo ReactIR-4000 AUTOCHEM Spectrometer S-1206-0900A MCT Mid-Band Detector FTIR Analyzer Lab with S-1506-0001A Power Supply with Software. In situreal-time data collection- Investigate chemistry and processes in real-time, directly in reactor. Mid-infrared technology - Deduce reaction pathways, mechanisms and kinetics with the spectral information. ReactIRTMReaction Analysis Software - Determine reaction performance, conversion, completion. Analyze and monitor virtually all classes of chemical reactions. Sealed Optics - Operates safely in fume hoods, mounted either on bench top or wall. CompactTower Design - Preserves valuable lab space. Product Specifications: Mid FTIR (4800 to 450 cm-1) analyzer Compact size Pjdpfx Aoua Hdrog Dsgk Sealed optics Temperature stabilized Pinned in-place detector modules Good working condition. Please check out our other listings as well.

Condition: like new (used), functionality: fully functional, overall weight: 749 kg, fuel type: electric, total length: 2,765 mm, total width: 1,346 mm, total height: 1,435 mm, power: 37 kW (50.31 HP), volume flow: 6.6 m³/h, pressure (min.): 5 bar, pressure (max.): 12 bar, ambient temperature (max.): 50 °C, noise level: 61 dB, type of cooling: water, Year of construction: 2023, machine/vehicle number: APP876730, The Atlas Copco E-Air H250 VSD is a single-stage, oil-injected screw compressor driven by an Atlas Copco electric motor with class H insulation and a speed of up to 9000 rpm. Unique to this new range is the PACE functionality in conjunction with the intuitive XC2003 control system. This ground-breaking technology enables multiple pressure and flow settings, allowing you to adjust the airflow and pressure to suit the requirements of your application. The E-Air VSD motor is characterized by its compactness, energy efficiency and quietness. In addition, the compressors are easy to install and operate. No exhaust fumes, unrivaled performance, low noise level. A plug-and-play design also allows you to transport the E-Air anywhere. Warranty for demonstration unit: 12 months from delivery Scope of delivery of the compressor: - Integrated permanent motor from Atlas Copco Psdpfx Agjud H Tns Dogk - Soundproofed HardHat hood - Cooling circuit with aftercooler - Air and compressed air connection - Air/oil separator and control systems - Leak-proof frame made of ASTM A653 Zincor sheet steel with powder coating - Closed floor pan - Undercarriage/chassis with fixed drawbar and hydraulic brakes - Overrun and parking brake, automatic reverse, star wheel - Truck DIN towing eye (40 mm), car coupling enclosed loose - 205R14C wheels for trailer operation - Lighting and operating license according to StVZO

Year of construction: 2022, condition: like new (used), Due to the planned closure of our laboratory in May/June 2026, we are offering laboratory equipment for sale in very good and excellent condition. The entire set is available. All equipment has been used as intended, regularly serviced, fully operational, and ready for immediate use. The offer includes, among others: LCS MS/MS, GC MS, fume hoods, spectrophotometer, shakers, laboratory refrigerators, digestion unit, water bath, laboratory furniture, and many more. This is an excellent opportunity for research institutions, universities, and companies in the biotechnology, chemical, and medical sectors to acquire high-quality equipment at attractive prices. Early reservation of individual devices is possible. Collection is available from May 2026 or upon individual arrangement. We invite you to contact us and inspect the equipment on site in Poland, Warmian-Masurian Voivodeship. Podpfx Asxmhfrjg Dsgk

Year of construction: 2017, condition: excellent (used), functionality: fully functional, Compact electric rotary oven Sveba-Dahlen with rotary platform, suitable for bakeries with limited space. Touch control panel with Sveba-Dahlen system Dual fans for even airflow Powerful heat exchanger - fast heating with low consumption Strong overlapping insulation - effectively prevents heat leakage Pgodpfxjtltr Nj Ag Dsk Stainless steel exterior and interior - keeps the surface temperature low and makes cleaning easier Strongly constructed stainless steel hood for efficient collection of fumes when the door is opened Parameters Sheet size: 600 x 800 mm Outer dimensions of the oven (w x h): 1450 x 1333 x 2445 Heating: electricity (60kW) Number of trolleys: 3 pcs Trolley dimensions (w, h, h): 675 x 825 x 1795 mm Oven is in very good condition. Used only 5 years in small bakery.

Year of construction: 2007, condition: good (used), Embroidery oven Miwe Roll-in - used - year of construction 2007 - for sheets 60 x 80 - computer control - oil or gas burner - fume hood with fan - 1 trolley - general overhaul - from stock or with delivery - with guarantee - Price on request Pgjdpfx Aeir I T Heg Djk

Condition: ready for operation (used), Manufacturer: Testo Model: 480 The Testo 480 features a built-in, high-precision differential pressure sensor, suitable for applications such as Pitot tube measurements, filter checks, and cleanroom monitoring. Its wide range of compatible probes allows measurement of the following parameters: Air velocity and air volume (e.g., for fume hood testing) Temperature Relative humidity Differential and absolute pressure CO₂ concentration Illuminance PMV/PPD (comfort index) Radiant heat Turbulence intensity WBGT index (heat stress) The instrument can be customized with various optional probes and accessories (e.g., a wireless printer for on-site reporting). Technical Specifications Temperature Measurement Pt100 Sensor Measuring range: –100…+400 °C Resolution: 0.01 °C TC Type K (NiCr-Ni) Sensor Measuring range: –200…+1370 °C Accuracy: ±(0.3 °C + 0.1% of measured value) Resolution: 0.1 °C Relative Humidity (Capacitive Sensor) Measuring range: 0…100 %RH Resolution: 0.1 %RH Air Velocity – Vane Anemometer Ø 16 mm: 0.6…50 m/s | Resolution: 0.1 m/s Ø 100 mm: 0.1…15 m/s | Resolution: 0.01 m/s Air Velocity – Hot-wire Sensor Measuring range: 0…20 m/s Resolution: 0.01 m/s CO₂ Concentration (Ambient Air) Measuring range: 0…10,000 ppm Resolution: 1 ppm Comfort Level Measurement Measuring range: 0…5 m/s Resolution: 0.01 m/s Differential Pressure – Built-in Piezoresistive Sensor Measuring range: –100…+100 hPa Accuracy: 0…25 hPa: ±(0.3 Pa + 1% of measured value) 25.001…100 hPa: ±(0.1 hPa + 1.5% of measured value) Pgsdpfew Au Nxsx Ag Dok Resolution: 0.001 hPa Illuminance Measuring range: 0…100,000 Lux Resolution: 1 Lux Absolute Pressure (Internal or External Probe) Measuring range: 700…1100 hPa Accuracy: ±3 hPa Resolution: 0.1 hPa General Technical Data Weight: 435 g Operating temperature: 0…+40 °C Storage temperature: –20…+60 °C Protection class: IP30 Connectable probes: 2 x TC Type K, 1 x differential pressure (internal), 3 x digital probes Compliance: Directive 2004/108/EC Battery life: approx. 17 hours (at 50% display brightness, without probes) Display: Color graphic display Power supply: Built-in rechargeable battery, mains charger for long-term measurements Data transfer: USB cable or SD card Memory capacity: 60,000,000 measured values

Year of construction: 2006, condition: as good as new (ex-display), machine/vehicle number: 4014, Mineralization system ASTORI - DIGI-6, KJELDAHL, model Digestor 67185 Description: The DIGI-6 Kjeldahl Digestion System allows the parallel digestion of up to 6 samples at the same time. Its strong and space-saving structure was studied to provide excellent heating efficiency and insulation. As a consequence, power consumption is reduced dramatically, meanwhile ensuring an optimized digestion procedure. The temperature is controlled by a digital thermal regulator: the selected value is kept with a surprising level of accuracy and precision; furthermore, the digital controller includes an over-temperature protection system. The provided rack allows quick handling of all digestion tubes, with its easy positioning and removal thanks to the practical lateral handles. The acid fumes are fully gathered by the glass caps and the acid-proof tubes, placed on the upper part of the equipment. The fumes are efficiently conveyed to the favourite fumes removing systems, such as a water jet pump or a scrubber: thus, the operator can choose to work outside the aspirating hood by easily connecting the DIGI-6 Kjeldahl Digestion System to an optional scrubber unit. The equipment can be used with up to 6 standard digestion tubes with 250 ml capacity, each. Upon request, a version for "Buchi" digestion tubes can be manufactured. Advantages and technical features : - 6-place heater - External structure in stainless steel - Digital temperature controller - Temperature setting from room values up to 450°C - Over-temperature protection - Designed for the maximum operator"s safety - High heating efficiency and excellent insulation - Traditional 250 ml digestion tubes can be used - Supplied with a fumes gathering system - Easily connectable to a scrubber unit - Rack for the quick and easy handling of tubes (the tubes should be ordered separately) - Power Supply: 220 Volts/50 Hz - Absorption: 1000W • For Romanian companies, there is the possibility of selling in instalments. Pgjdpfx Aofimhxeg Dsk Price Euro 1.990 + VAT, Ex Works Loaded of FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale /Ne rezervăm dreptul la greșeli, modificări și vânzare. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: ready for operation (used), functionality: fully functional, repeat accuracy: 0.002 mm, table load: 50 kg, rotary table diameter: 500 mm, The offer consists of the following components: VL-770 Probe Head – High-resolution optical 3D scanner VL-700 Control Unit – Control and evaluation unit, including software interface VL-C35 Cover – Light protection hood VL-A3D Software Package – Measurement and evaluation software (German) OP-88145 Calibration Plate – Reference plate VL-H3G Module – Geometric dimensioning and tolerancing (GD&T) module VL-H3R Module – CAD conversion module VL-B1 Accessory – Calibration ball gauge OP-99031 Cable – AC power cable TECHNICAL DETAILS Repeatability (σ): 2 µm Measurement accuracy: ±10 µm Measurement resolution: 9 million measurement points Measuring range Low magnification: Ø300 × H200 mm High magnification: Ø70 × H50 mm Work Table Rotary table: 500 mm Rotation mechanism: 360° XY movement of object stage: Ø200 mm Tilting mechanism: up to 45° Maximum load capacity: 50 kg MACHINE DETAILS Psdpfjy Eglqjx Ag Djgk Weight Weight of control unit: 3.7 kg Weight of object table: 26 kg Weight of cover: 5.5 kg Weight of measuring unit: 19.6 kg EQUIPMENT Original software and manuals Calibration plate Protective hood Monitor, PC, keyboard, and accessories

Condition: good (used), Year of construction: 1998, grinding wheel diameter: 915 mm, overall weight: 14,000 kg, GIUSTINA Grinder R242 to ground big bearings (up to 800mm). All machine's actions are controlled by Bosch Control. Beside controlling parts grinding process, the NC programs are also an operator guide for the machine set up and a source of information about wheel wear, thus allowing the operator to check wheels without opening the hood. Equipped with: Bosch CNC Control Specifications: Wheel Rotation Axis: Horizontal Grinding Wheel Size (OD): 915 mm Grinding Wheel Size, Usable Width: 65 mm Grinding Wheel Size, Peripheral Speed: 30 ms Spindle Motors: 75 kw Grinding Feedrate: 0.1 - 1000 mm/min Spindle Type: Moving Quill Angular Contact Spindle Bearings (Precision): ABEC-7 (ISO4) Slide Position Accuracy: 0.001 mm Pjdpfsrtr D Isx Ag Dogk Coolant Flow Rate: 600 l/min Work Capacity (Approx) Rotary: 20 -200 Dia. In.

Condition: excellent (used), Year of construction: 2012, Ref:11095 . 2012 ‘Heidelberg’ Stahl TH82/442K-RFH High performance all buckle folding machine with computerised auto set-up of fold plates & rollers. Comprising; Pgedpsy Hixvjfx Ag Djk • RFH82 continuous loading round pile feeder with air stream table designed for high run lengths • With low operator strain, double wheel suction head for wide format sheets. • Digital microprocessor control with touch screen display for automatic setting of fold plates and roller pressures with learning function for signature length, suction & spacing with run monitoring, integrated total and batch counter with memory. • Touch-screen for fully automatic setting of fold plates and roller pressures. • Combination buckle plates with swing-away deflectors for quick change from stop to fold. • Setting adjustments can be made outside the machine ‘on the fly’. • Sound hoods covering all buckle units. • SAK-66 shingle belt delivery table. Including compressor, tools, spares & manuals. Accessories: Electronic gate-fold plate with control unit. VFZ mobile electronic ‘Z’ knife fold unit. Folding sequence: 1st buckle unit - with 4 plates, perforating/scoring shafts 2nd mobile buckle unit - with 4 plates, perforating/scoring shafts 3rd mobile buckle unit - with 2 plates, perforating/scoring shafts VFZ mobile electronic knife fold. Specification: Sheet size, Max: 82 x 128 cm (Continuous Feeder) Min: 14 x 18 cm.

Condition: good (used), Year of construction: 2003, Ref:11096 . 2003 MBO K760/4KL-RF 16pp Combination folding machine Comprising; RF continuous loading round pile feeder Sound hood with inspection windows Electronic knives Pgedoy Hixijpfx Ag Djk SAP Presser stacker A76 Shingle belt delivery unit.

Condition: used, -Reference: 7.2 / 84x214-4 -Oven dimensions (WxDxH): 1475x2780x2400 mm -Hearth size (WxD): 840x2140 mm -Baking surface: 7.2 m² -Serial No.: 1405116/BN/0010 -Temperature: 300°C -Electronic controls -Year: 2014 -4 decks -Voltage: 400V -Power: 43.5 kW -Weight: 3400 kg -High-efficiency combustion chambers -Combustion chamber with reinforced insulation -Large radiant surface across the three flue channels, ensuring rapid temperature recovery after loading -Flue channels fully lined with refractory material to improve temperature retention and heat resistance STEAM -Steam generator for each deck -Steam generators located on the right side inside each baking chamber -Electrovalve group for water supply mounted on the oven roof -STEAM EXHAUST -Individual steam exhaust for each baking chamber -Hood with steam extraction fan -Steam extractor with single speed -Manual steam exhaust valves ELECTRICAL INSTALLATION -Controls located on the left side -Electrical panel accessible from the front for easy maintenance -Lighting system with 1 lamp per deck positioned at the mouth, easily replaceable -Safety thermostat Psdpfx Aoy H Hykog Dsgk

Condition: used, -Dimensions: 1420x2600x2200mm -Stone size: 801x1630mm -Model: Omega5.163 -5 decks -Serial number: 8118337 -Year: 2003 -Baking surface: 6.6m² -Temperature: 300°C -Voltage: 400V -Power: 30kW -Weight: 1800kg -Refurbished equipment: The equipment is prepared upon order; lead times for collection and return are agreed upon at the time of ordering (please request the price after revision) -Front with brushed stainless steel hood -Solid refractory cement baking stones, 20mm thick -Stainless steel armoured electric heating elements Pgodpfx Ajy H Ebmjg Djk -1 independent pressure relief valve per deck -1 independent steam generator per deck -Treated glazing to reduce heat loss -Steam unit and column always on the same side -Equipped with a steam extractor for the hood -Insulated with cross-laid rock wool panels -Wiring looms made of high-temperature silicone cables

Condition: used, -Dimensions: 1620x2225x2300 mm -Serial no.: 12026399 -Model: Omega 4 -Slab size: 801x1840 mm -Year: 2007 -Baking surface: 5.9 m² -Max. temperature: 300 °C -Integrated loader/lifter -Voltage: 400V -Power: 27 kW -Weight: 1590 kg -Overhauled equipment: equipment is prepared upon order; collection and return deadlines are agreed at this time (please request price after overhaul) -Front panel with brushed stainless steel hood -Heavy-duty refractory cement baking decks, 20 mm thick -Stainless steel sheathed electric heating elements -1 independent relief damper per deck -1 independent steam generator per deck -Thermal treated glass to reduce heat loss -Steam unit and column always on the same side Psdpfsy H D A Asx Ag Dsgk -Equipped with steam extractor for the hood -Insulation by cross-laid rock wool panels -High-temperature silicone cable wiring harnesses

Condition: used, Year of construction: 2014, ■ V304 plate cutting machine capable of processing plates up to 1.500mm x 3.000mm ■ V304 plate processing machine (including gantry beam 2.500mm and side trucks) ■ X-rail (5.000mm on both sides of the machine, including double linear guides, helical rack and pinion system and rubber covering band) ■ Plasma cutting and extraction table (1.600mm x 3.090mm, 1 pcs) ■ Plasma cutting unit Kjellberg HiFocus280i (1 pcs) ■ Torch suspension for plasma cutting unit (including IHT M4000 PCS automatic height control) ■ Carriage for cutting unit (motor driven, including laser pointer, 1 pcs) ■ Kemper fume extraction unit 81 0550 090 (including spark trap 1 pcs) Psdoy E Nykopfx Ag Degk ■ Hardware and software (includes VACAM ‘Machine Edition’, VACAM ‘Office Edition’, VACAD editor software module, VANEST nesting software, Layout marking software module) ■ Safety devices (safety bumpers, emergency stop cord) Technical specifications PLASMA CUTTING UNIT HIFOCUS 280i Material Mild steel, stainless steel, aluminum Min. thickness 3 mm Max. thickness 70 mm Max. pierce capacity 40 mm Dross-free cutting max. 35 mm Automatic height setting Yes, IHT M4000 PCS Marking lines Yes, with same consumables Plasma gas mild steel Cutting O2 (99,9% pure clean, dry, oil-free) Marking Argon gas Shield gas mild steel O2 / air (99,9% pure clean, dry, oil-free) Automatic gas console Yes Cutting speed mild steel 6 mm Approx. 4.100 mm / min 90A 12 mm Approx. 3.200 mm / min 160A 25 mm Approx. 2.000 mm / min 280A 40 mm Approx. 720 mm / min 280A 50 mm Approx. 400 mm / min 280A 70 mm Approx. 150 mm / min 280A * Grounding max. 6m of machine: AC power, PE and service grounds must be connected to all equipment according to local and national codes. COLOUR Plates RAL 3003 Red Frames RAL 7011 Grey GENERAL INFORMATION Working height 700 mm (+/- 20 mm) Voltage stabilizer Not included Ambient temperature 0 – 35°C max. 95% relative humidity

Condition: used, Year of construction: 2014, functionality: fully functional, ■ Infeed roller conveyor (length 6m, width 2000mm, roll diameter 159mm, roll distance 800mm, capacity 1250kg/m, including liftable datum line) ■ V320-2000 Plate processing system (base frame with vertical drilling unit, automatic tool changer and automatic discharge table) ■ Feeder trucks (servo driven, master truck with 3 hydraulic clamps, support truck with 2 hydraulic clamps) ■ Swarf brush (automatic swarf removal after drilling operations) ■ Oxy-fuel cutting torch (1 pcs, with automatic height control IHT M4000 Cap) ■ Plasma cutting unit Hypertherm HPR260XD (1 pcs, automatic gas console, complete with cutting parameter database) ■ Fume extraction unit Donaldson DFPRO6 ■ Product conveyor belt ■ Outfeed roller conveyor (length 3m, width 2000mm, roll diameter 159mm, capacity 1250kg/m) ■ Hardware and software (including VACAM ‘Machine Edition’, VACAM ‘Office Edition’) ■ Safety devices (safety fencing, light curtain, light curtain muting) ■ Year of construction 2014 Technical specifications Podpfjy E Nxgsx Ag Degk Operating range V320-3000 Min. / max. plate length 850 – 6.100 mm Min. / max. plate width 200 – 2.050 mm Min. / max. plate thickness 6 – 75 mm Max. capacity 7.500 kg Material Mild steel Drilling unit VD40 Automatic tool changer 10 positions Feed Synchronous driven servomotor, servo-inverter Spindel rpm Step less 0 – 2.500 rpm (servomotor) Nominal power 30 kW Lubrication Internal and external by mist of air / oil Tool holder SK 40 Drill diameter 5 – 40 mm Thread tapping M6 – M24 Centre point marking possibility Yes Countersinking possibility Yes Layout marking possibility Yes Hydraulic clamping Yes Plasma cutting unit HPR260XD Max. thickness 64 mm Max. pierce capacity 38 mm Dross-free cutting max. 32 mm Marking Yes, with same consumables Plasma gas mild steel Cutting O2 (99,9% pure clean, dry, oil-free) Marking Argon gas Shield gas mild steel O2 / Air (99,9% pure clean, dry, oil-free) Cutting speed 6 mm Approx. 4.035 mm / min 130A 12 mm Approx. 3.060 mm / min 200A 25 mm Approx. 1.660 mm / min 260A 50 mm Approx. 590 mm / min 260A 64 mm Approx. 195 mm / min 260A * Grounding max. 6 m of machine: AC power, PE and service grounds must be connected to all equipment according to local and national codes. Oxy-fuel cutting unit Type Nozzle mix Automatic height setting Yes Gas supply Magnetic valve with back-fire protection Ignition Automatically Max. thickness 75 mm Gas Propane Optional gas Acetylene Cutting gas O2 Operating direction From left to right General information Voltage stabilizer Not included Current Transformer Not included Ambient temperature 0 – 35°C max. 95% relative humidity Working height 760 mm (+/- 25 mm)

Condition: new, Year of construction: 2022, Ex College A1 Condition - Unused Worktable size 1200 x 700mm Useable spindle height 140mm Max spindle protrusion above the table 190mm Pgsdey Efvhjpfx Ag Dek Spindle rotation speeds 1300 / 2500 / 3500 / 5000 / 6000 / 8500 rpm. Max size of tool retractable under the table 320 x 50mm Main motor power 5.5hp Spindle tilting range -5 to +45 degrees 11/4" dia fixed spindle Adjustable fence max tool dia 250mm Mechanical readout and hand wheel for total fence displacement Mechanical readout and hand wheel adjustment for right infeed fence Dust extraction point on hood 120mm Dust extraction point on rear of machine frame 120mm Gravitational display for tilting angle of the spindle - adj by hand wheel Power rise / fall of spindle with decimal height readout Safety interlock on door Safety microswitch on fence assembly Key locking master switch Electromagnetic spindle brake LED light display for spindle speed setting Emergency stop button Pre arrangement (electrically) to accept a power feed unit (Feeder extra cost) Left and right table extensions 200mm total overall length with frontal retractable support bar

Condition: new, - Dimensions: 1370x190x2000 mm - Capacity: 100 trays Pgodpfoy Hrf Eex Ag Djk - Weight: 109 kg - The steam sensors are designed to be connected to the exhaust of your oven and not to the outlet of the hood, then routed to a drain. - The drain must be connected at the bottom section. - The steam radiators do not operate with the hood suction system. - There is no fan connection.

Year of construction: 2003, condition: good (used), machine/vehicle number: FA/07/RE/1612/3, For sale: Complete industrial extraction system consisting of 6 Colt Coltair roof fans, including the corresponding control cabinet/central control unit. This system was used for ventilation and extraction in a warehouse measuring approximately 90 x 25 x 12 meters and has been decommissioned in working condition. The entire set has been professionally dismantled and is preferably sold as a whole. The fans are suitable for, among other things: - Welding fume extraction - Fume extraction - Ventilation of workshops and warehouses - General industrial air exchange Technical data per fan Brand: Colt International Ltd Product: Coltair Fan Unit Type: FA/07/RE/1612/3 Power supply: 400V Motor: 3-phase Output: 0.60 / 0.40 kW Speed: 900 / 650 rpm Capacity: 3.62 / 2.85 m³/s Pgsdpfx Agjy Hw Avs Dsk Converted per fan: approx. 13,032 / 10,260 m³/h Total capacity for the complete set Approx. 78,192 m³/h on high setting Approx. 61,560 m³/h on low setting What is included: - 6 roof fans - Complete control cabinet / control unit - Used, well-maintained industrial set - Professionally dismantled in working order Inspection possible by appointment. Loading on site by arrangement. Relevant keywords roof fan, extraction fan, industrial ventilation, welding fume extraction, warehouse ventilation, extraction system, 400V fan, Colt Coltair, roof extraction, industrial extraction set

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Cypcut FSCUT, controller model: 2000E, laser type: fiber laser, laser source manufacturer: MAX/RAYCUS 3000, laser source model: 3000, laser power: 3,000 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, table length: 1,350 mm, table width: 930 mm, working length: 1,300 mm, working width: 900 mm, warranty duration: 12 months, Equipment: CE marking, centralized greasing system, documentation/manual, emergency stop, fume extraction, CNC Laser machine for sheet metal, complete close and compact design. IMPACT CL-1390 Fully automatic Metal Cutting Machine 1300*900 fiber laser cutting machine with economical price. Small laser cutting machine, compared to regular laser cutting machines, boasts higher precision and excels in cutting high-reflective materials with smaller kerfs and no burrs, thereby reducing the cost of secondary processing. Often referred to as a "desktop" or "medium-format" model, its enclosed design and axis configuration make it the gold standard for safety and detail. Maximum Safety & Environment - The fully enclosed cabinet provides a light-tight environment, protecting operators from laser reflections and eliminating the need for safety goggles. It also features a dedicated ventilation port to efficiently extract fumes and dust, keeping your workspace clean and healthy. Compact & Versatile - With a 1.3m x 0.9m workspace, this model bridges the gap between hobbyist tools and massive industrial cutters. It is small enough to fit through standard double doors but powerful enough to handle most type of production parts. Stability and Protection - The "closed" box structure acts as a rigid frame, reducing vibrations during high-speed movements. Additionally, the enclosure protects sensitive internal components—like the laser head and guide rails—from external debris, significantly extending the machine's lifespan. IDEAL for precision parts, thin sheets and small-medium size workpieces: • Auto-focus laser head and Automatic edge detection; • Stable cutting quality; • Compact footprint with complete closed design for safety and environment, CE standard; • Easy to operate. Intelligent control system Intelligent control system, real-time monitoring, many functions, safe production, large-size high-definition screen, ergonomic design. Windows interface with CYPCUT software controller offers a simple yet intuitive control with optimization and nesting functions included. Also it allows internet connection so that a remote intervention can be made when needed. Positioning accuracy ±0.02 mm Repeatability accuracy ±0.02 mm Maximum speed 120 m/min Maximum acceleration 1.0G Complete set of consumables included Nesting and automatic edge detection functions included Windows interface with internet & WIFI and assist service Wireless remote for easy control Movable operating panel with arm and LCD display Automatic oil lubrication system Oxygen low pressure alarm Exhaust smoke system with centrifugal fan Industrial cooling/heating system of the laser head and laser source - Dual cooling system OD4+ laser protection glass system with fully enclosure Voltage stabilizer & regulator unit CE mark Pgjdpfx Aox Rn Tmeg Dok Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Dealer CNC Top Ten b.v. Coevorden Holland

Condition: like new (used), functionality: fully functional, machine/vehicle number: NM0KCXTP6KPY93575, mileage: 89,500 km, power: 367.75 kW (500.00 HP), first registration: 12/2023, fuel type: diesel, tire size: 315/70 R 22.5, axle configuration: 4x2, wheelbase: 3,600 mm, next inspection (TÜV): 02/2027, fuel: diesel, brakes: engine braking, color: black, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, airbag, cruise control, navigation system, onboard computer, parking heater, soot filter, spoiler, traction control, NM0KCXTP6KPY93575 - PT-028 STANDARD EQUIPMENT: Air-suspended cab ▪ Automatic air conditioning ▪ Sleeper area remote control ▪ Black grille ▪ Body-coloured exterior mirror caps ▪ Body-coloured front bumper ▪ Body-coloured engine hood ▪ Cruise control & speed limiter ▪ Driver’s seat – heated & air-suspended ▪ Dry air cab heater ▪ EBS (electronic braking system) ▪ Electrically heated and adjustable mirrors ▪ Electrically operated sliding roof ▪ Front & rear underrun protection ▪ Extended front bumper ▪ Switchable air compressor ▪ DAB radio ▪ Lane Departure Warning ▪ Rain sensor (automatic dipped headlights & wipers) OPTIONAL EQUIPMENT: 8T front axle ▪ ADR ▪ 1350L fuel tank ▪ 19T GVW ▪ CB radio antenna ▪ NH4C PTO ▪ Air horn ▪ 1100mm fifth wheel ▪ 2.47 rear axle ratio Podowiv S Uepfx Ag Dogk Discover our dealers on the Ford Trucks Belux website. Interested? Please feel free to get in touch.

Condition: ready for operation (used), Year of construction: 2008, functionality: unexamined, DESCRIPTION Beck-Packautomaten Series Packer S1750 X Fully automatic film packaging machine for four-side product sealing Fully automated, conveyor belt feeding with light barrier control Operation: The Beck series packer operates fully automatically with photoelectric product detection. The goods to be packaged are conveyed on a transport belt into the cross sealing unit and are then sealed on all four sides in a step-by-step process. The film rolls are positioned above and below the transport belt. For the production of tight shrink packs, the packaging machine can be expanded into a complete film packaging line by integrating the proven, energy-saving Beck heat shrink tunnel. Technical data: Standard operator side: right Sealing bar width: 550 mm Sealing bar closure: servo-driven Sealing system: permanently heated Pass-through height: 100 mm Infeed belt width: 140 mm Outfeed belt width: 140 mm Product width: 150–500 mm Product length: 30 mm up to unlimited, with closure of sealing bar gap Speed control: infinitely variable with frequency converter from 19–40 m/min Capacity: up to 50 cycles/min* Longitudinal sealing: continuous operation Film: flat film, printed or plain, from 11 to 80 micron Film width: max. 650 mm Film roll diameter: max. 300 mm Psdsy H Dynepfx Ag Djgk Machine length: 2,550 mm Machine width: 1,600 mm Machine height: approx. 1,700 mm Working height: 800–950 mm Electrical connection: 3N400V 50 Hz Connected load: approx. 3 kW Paint finish: cream white / green * Machine output depends on equipment, product, and film. Description: • Machine frame in steel sandwich construction • The sealing system is permanently heated and maintenance-free • With freely-programmable Siemens S7 PLC • Siemens operator panel: digital control unit OP7 • Easy format changeover via central width and height adjustment • Format data storage with simple menu and operator guidance • Inline product feeding, product indexing via light barrier, optionally horizontal or vertical scanning • Hold-down plates at the cross sealer with product scanning • Longitudinal sealing electrically actuated • Film unwind device integrated in the machine frame, without plug-in shaft (allows easy and quick film roll change) • Film rewind device with film break-control, high roll capacity • Film feed motor-driven, including end-of-film detection • Machine hood for optimum accessibility, all safety windows equipped with safety switches • Beck packaging systems meet CE conformity requirements Additional equipment: - Rotary encoder, swing-away side sealing system, needle perforation unit for the top film

Condition: ready for operation (used), Year of construction: 1995, functionality: unexamined, total length: 1,860 mm, total height: 1,500 mm, total width: 800 mm, type of input current: three-phase, input voltage: 400 V, input current: 27 A, power: 12 kW (16.32 HP), input frequency: 50 Hz, nominal power: 13 kW (17.68 HP), Thermal Shrink Tunnel HV 400 - Used machine, built in 1995 - Inspected, tested, and fully operational This high-performance shrink tunnel is designed for energy efficiency. The heating system and adjustable settings are highly variable, allowing for precise shrinking of film-wrapped products with various shapes and contours. Pgodpfjy H Dxksx Ag Dsk Operating principle The thermal shrink tunnel operates with separate blowers for independently adjustable upper and lower heating. The machine is equipped with an electronic temperature controller and is designed for a maximum internal temperature of up to 250 °C. The conveyor speed is infinitely variable. Technical data Passage width: 400 mm Passage height: 130 mm Hood length: 1,000 mm Conveyor length: 1,860 mm Rod conveyor: Rotating rods with silicone coating, every second rivet fitted Power supply: 380 V three-phase, 50 Hz Heating capacity: Selectable from 2 - 10 kW Connected load: 12 kW Color: Hammertone light grey Additional equipment: Temperature control with electronic regulator and contactless relay for precise temperature consistency Pressure rollers at the discharge end