Used Güde Piston Compressor for sale (6,017)

Condition: excellent (used), Year of construction: 2009, operating hours: 99,000 h, functionality: fully functional, overall weight: 2,400 kg, fuel type: electric, volume flow: 1.368 m³/h, pressure (max.): 13 bar, COMPAIR L132SR-13A Screw compressor serviced, for sale in excellent condition 123kw power, air flow: 420 m3/h Manufacturer: Compair L132SR 13A year of manufacture: 2009.04 operating hours: 99000 Knsdpfx Ahetvwwboijc Drive power: 132Kw Pressure 13 bar Flow rate: 22.8 m3/min Delcos XL control Main rotor RPM: 2980 voltage: 400v 50Hz 3 phase 85A machine weight: 2358 kg dimensions: 1722 x 920 x 1659

Condition: ready for operation (used), Year of construction: 1998, operating hours: 28,973 h, functionality: fully functional, overall weight: 2,750 kg, total length: 2,800 mm, total width: 1,150 mm, total height: 1,770 mm, power: 132 kW (179.47 HP), volume flow: 1,630 m³/h, type of cooling: water, input voltage: 400 V, input frequency: 50 Hz, operating temperature: 201 °C, pressure: 2.75 bar, rotational speed (max.): 12,874 rpm, type of input current: three-phase, Equipment: compressor, documentation/manual, type plate available, Only 2 units available! Aerzen VM 30 screw compressor Used to pneumatically unload railway cars. Manufacturer: Aerzen Type: VM 30 Volumetric flow rate: 27.17 m³/min (1630.2 m³/h) Pressure increase: 2.75 bar Compressor speed: 12874 rpm Shaft power: 105 kW Motor power: 132 kW Final temperature: 201 °C Cooling of the compressed air is done with water via a shell and tube heat exchanger. Year of manufacture: 1998 Dimensions: Length: 2800 mm Width: 1150 mm Height: 1770 mm Weight: approximately 2750 kg Operating hours: Compressor 1: 28109 hours Compressor 4: 28973 hours Ksdsrkpp Hepfx Ahijnc Regular service was performed by a specialized service company! Not operated since 2019. Have been stored in a dry and heated location since then.

Year of construction: 1997, condition: used, feed pressure 10 bar liter capacity 1400 m³ / min dimensions 700 x 550 x 1100 mm total power requirement 11 kW Knjdpfxeqvcldo Ahioc weight of the machine ca. 275 kg

Condition: new, Year of construction: 2026, functionality: fully functional, LUFT 1000 COMPACT Screw Compressor with Refrigerated Air Dryer and 500 L Compressed Air Tank The LUFT 1000 COMPACT screw compressor with an integrated refrigerated air dryer and a 500 L compressed air tank is a modern solution designed for reliable and efficient compressed air supply. The CORMAK LUFT series screw compressors combine state-of-the-art pneumatic technology with high-quality materials and components. Low operating costs, ease of use, an ergonomic and robust design, and high performance guarantee efficient and trouble-free operation. THE SET INCLUDES: LUFT 1000 COMPACT screw compressor with refrigerated air dryer 500 L horizontal compressed air receiver Are you looking for a professional solution for powering pneumatic tools in a workshop, paint shop or small production line? The CORMAK LUFT 1000 COMPACT screw compressor with refrigerated air dryer is an excellent choice. With a 7.5 kW motor and an impressive actual output of up to 990 l/min, it provides a continuous supply of compressed air required for efficient operation of impact wrenches, blow guns and painting tools. It can also be used as a compressor for small sandblasting machines. This model has been designed for continuous-duty operation, making it ideal for demanding applications such as tyre service centres, automotive workshops and small manufacturing facilities. Investing in a CORMAK screw compressor means a significant improvement in working comfort – say goodbye to noisy piston compressors and enjoy quieter, more stable operation. The screw compressor is also equipped with an integrated refrigerated compressed air dryer, which provides dry and clean air while protecting the compressed air system against corrosion and damage. The LUFT 1000 COMPACT oil-injected screw compressor with dryer features a traditional belt drive, resulting in easier maintenance and lower servicing costs. Belt replacement is simpler and less expensive than repairing a direct-drive system, and a worn belt can be easily replaced with a new one. Extended Component Service Life The belt drive also contributes to longer component life. The absence of a rigid connection between the motor and the compressor's working components reduces mechanical wear and stress, helping to extend the service life of the system. The maximum operating pressure generated by this screw compressor is 10 bar. Full control over the machine's operating parameters is provided by an intuitive MAM electronic control panel, giving the operator access to key machine information and greater flexibility and control over the production process. Key Parameters ✅ Pressure: up to 10 bar ✅ Air output: up to 990 l/min ✅ Motor power: 7.5 kW Technical Specifications Parameter Specification Motor power 7.5 kW Voltage 400 V / 50 Hz Output at 0–6 bar 990 l/min Output at 6 bar 950 l/min Output at 8 bar 950 l/min Output at 10 bar 930 l/min Outlet connection diameter (G) 3/4" Dimensions 1840 × 650 × 1675 mm Weight 400 kg Kjdpfsrh E Dqex Ahienc

Condition: excellent (used), Year of construction: 2004, operating hours: 114,000 h, overall weight: 4,400 kg, power: 250 kW (339.91 HP), volume flow: 2.802 m³/h, operating pressure: 10 bar, Regularly serviced, in excellent condition. Atlas Copco ZR250 Screw compressor, 10bar 46m3/min Oil-free, water-cooled. MD600 with adsorption dryer Compressor: Manufacturer: Atlas Copco Type: ZR 250 year of manufacture. 2004 loaded operating hours 114,000 Max. operating pressure: 10bar single-stage drive Cooling water consumption 3.7 liters/s Air delivery: 43.6m3/min Water cooled Oil free Power: 250 kW Mains voltage: 400v 50Hz 445A Last service: September 2023 Knsdpfxsrp D Uxe Ahioc Adsorption dryer, water-cooled Manufacturer: Atlas Copco Type: MD 600 W Year of construction: 2004 Max. operating pressure: 10.5 bar Empty volume: 350 liters machine dimensions: length: 3000mm width: 1600mm height: 2000mm weight: 4400 kg

Condition: used, Compressed air dryer PARKER HIROSS for compressor systems Mechanical condensate separator, water separator Refrigerant dryer with water-cooled aftercooler for removing water vapor and cooling the compressed air or gases. 1 aftercooler, type WFN009 DHH16 Air flow rate (normal): 540 m3/h = 9000 liters/min. Operating pressure (air): max. 16 bar Housing length: 1020 mm Housing diameter: Ø 105 mm Threaded air connection: G 2" Threaded water connection: G 3/4" Weight of aftercooler: 11 kg Dimensions of aftercooler (L x W x H): 1030 x 850 x 200 mm + 1 water separator, type CSP 008 Flow rate (normal): 480 m3/h = 8000 liters/min. Operating pressure: max. 16 bar Threaded connection: G 2" - Filter housing made of aluminum + 1 mechanical condensate separator HIROSS SAC 120 Threaded connections: R 1/2" Operating pressure: 16 bar Volume: 0.8 liters - Operates without compressed air loss All components mounted as shown in the pictures. Height when mounted vertically: 2000 mm Ksdpsdzqn Uefx Ahisnc Total weight: approx. 40 kg

Condition: new, Year of construction: 2025, operating hours: 2 h, machine/vehicle number: LENTO 55WK, New Speed-controlled, oil free, water injected screw compressor ALMIG LENTO 55 LK Year of construction: 2025 technical spezifications: Type: LENTO 55 WK Possible operating pressures of the system(continuously adjustable): 5 - 12 bar Delivery rate at minimum/maximum speed, measured according to ISO 1217 Annex C: at 5 bar min/max: 1.41 / 7.79 m³/min at 6 bar min/max: 1.40 / 7.74 m³/min Knedjc Rt D Njpfx Ahioc at 7 bar min/max: 1.39 / 7.69 m³/min at 8 bar min/max: 1.38 / 7.64 m³/min at 9 bar min/max: 1.37 / 7.59 m³/min at 10 bar min/max: 1.35 / 7.29 m³/min at 11 bar min/max: 1.34 / 6.97 m³/min at 12 bar min/max: 1.33 / 6.71 m³/min Rated power of drive motor: 55 kW Protection / insulation class of drive motor: IE 3Protection / insulation class of fan motor: IP 54 / H Operating voltage / frequency at min. / max. speed: 380 / 41/200 V/Hz Residual oil content: 0 mg/m³ Cooling water requirement at 100% load( at inlet +15° / delta t = 15 K ): 55 l/min Cooling water outlet (max): 45 °C Cooling water pressure (min / max): 2 / 10 bar Cooling water quantity (min / max): 140 l/min Cooling water quality according to the valid "ALMiG cooling water conditions" Pressure dew point of refrigerant dryer at 50% load: 3 °C 100% load: 3 °C Sound pressure level (DIN 45635 T.13) soundproofed, at 50% load: 75.6 dB(A) 100% load: 78.2 dB(A) Length: 2,300 mm Width: 1,400 mm Height: 1,580 mm Weight: 1,690 kg Compressed air connection: G 1 1/2 inch Visit our shop, we always have a large number of new and used compressors in stock.

Condition: like new (used), Year of construction: 2018, operating hours: 145 h, machine/vehicle number: MA0003_SN807103, Demonstration Machine available immediately: RENNER RS-18,5 oil-injected screw compressor. Made in Germany Knsdpfxodulwne Ahioc The compressor is in very good condition with 45 operating hour. Pressure: 10 bar Rated power: 18,5 kW Delivery quantity: 2620 liters / min Sound level: 71 dB (A) Compressed air output: 1 1/4 " Dimensions Length x Width x Height: 1287 x 799 x 1296 mm Weight: 532 kg Operating hour: 145 Bh

Condition: used, System: Used piston - diaphragm pump Knodsb E Nu Tepfx Ahijc Manufacturer: Abel Type: HMD-G-20-0125 Year of construction: 2001 Series: HM Machine number: 5100074 Material: GG Capacity: 18 m m³/h Delivery pressure: 15 bar Speed: 131 U/min Temp: MAX 100 ° C Operating voltage: 380 V Frequency range: 50 Hz Motor: 11 kW Protection class: IP55 Flanges: DN 80 Dimensions: 1.70m L x 1.30m W x 1.60m H Miscellaneous: forced ventilation 230/400V, 0.11 kW

Condition: excellent (used), Year of construction: 2005, S017013 PROD. KAESER TYPE SK21T S/N 1145 YEAR 2005 POWER (kW) 11 CAPACITY (m3/min) 1.5 PRESSURE (bar) 8 HOURS (RUNNING/TOTAL) 772025 FREQUENCY CONVERTER no BUILT-IN DRYER yes, R134a 0.65 kg HEAT EXCHANGER no Knodpfsz Dgp Uox Ahiec COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTION 1 1/4 NEW/USED USED

Condition: excellent (used), Year of construction: 2006, S015361 MANUFACTURER: KAESER TYPE: SK24 SERIAL NUMBER: 1353 YEAR: 2006 POWER (kW): 15 CAPACITY (m3/min): 2.02 PRESSURE (bar): 8 HOURS (RUNNING/TOTAL): 42413 Kodpfjz Dgvusx Ahijnc FREQUENCY CONVERTER: no BUILT-IN DRYER: no HEAT EXCHANGER: no COOLED BY (AIR/WATER): air ON-BOARD TANK: no DOCUMENTS: no CONNECTION: 1" NEW/USED: USED

Condition: excellent (used), S016792 PROD. KÄSER TYPE ASD57 S/N 1382 YEAR 2006 POWER (kW) 30 CAPACITY (m3/min) 4.5 PRESSURE (bar) 8 Knedsz Dhauepfx Ahioc HOURS (RUNNING/TOTAL) 75176/96563 FREQUENCY CONVERTER no BUILT-IN DRYER no HEAT EXCHANGER no COOLED BY (AIR/WATER) air TANK-MOUNTED no DOCUMENTS no CONNECTION 1 1/2 NEW/USED USED

Condition: new, Year of construction: 2026, PROD. ATLASCOPCO TYPE G15FF S/N ITJ078586 YEAR 2026 POWER (kW) 15 CAPACITY (m3/min) 2.45 PRESSURE (bar) 9.75 HOURS (RUNNING/TOTAL) 0 INVERTER no BUILT-IN DRYER yes, R513a 0.47kg HEAT EXCHANGER no COOLED BY (AIR/WATER) air WITH TANK yes, 500L DOCUMENTS yes CONNECTION 1' NEW/USED NEW Kodpsz Dhqtjfx Ahienc

Condition: excellent (used), Year of construction: 2019, PROD. KAESER TYPE CS121 Ksdez Dinajpfx Ahijnc S/N 1210619 YEAR 1996 POWER (kW) 75 CAPACITY (m3/min) 11.5 PRESSURE (bar) 7.5 HOURS (RUNNING/TOTAL) 59688 / 82105 FREQUENCY CONVERTER no BUILT-IN DRYER no HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTION 2 NEW/USED USED

Condition: excellent (used), Year of construction: 2014, Total power: 55 kW Power supply: 400 V / 50 Hz Knodpfx Ahjzy Hrkeiec Maximum operating pressure: 8 bar Motor speed: 3,500 rpm Weight: 1,300 kg.

Condition: used, Year of construction: 2007, operating hours: 73,989 h, functionality: fully functional, power: 25 kW (33.99 HP), volume flow: 5.27 m³/h, pressure (max.): 8.5 bar, ambient temperature (min.): 3 °C, ambient temperature (max.): 45 °C, type of cooling: air, Equipment: documentation/manual, type plate available, For sale is a used KAESER rotary screw compressor, model ASD 47 SFC, with a 25 kW drive power, frequency control, and a heat exchanger for heat recovery. The integrated heat recovery system allows the heat generated during compressor operation to be used, for example, to heat domestic hot water, heating water, or for other operational heat processes. This enables the efficient reuse of the waste heat generated during operation. Technical data: Manufacturer: KAESER Kompressoren Type: ASD 47 SFC Year of manufacture: 2007 Serial number: 3705 Knjdpfez Eqa Tex Ahisc Rated power: 25.0 kW Motor speed: 3,000 rpm Max. operating pressure: 8.5 bar Frequency-controlled drive: SFC Control system: KAESER SIGMA CONTROL Heat exchanger for heat recovery Ambient temperature: 3–45 °C CE marking present Operating hours according to display: approx. 73,989 h Load hours according to display: approx. 72,914 h

Condition: excellent (used), Year of construction: 2008, ATLAS COPCO GA90VSDFF screw compressor, equipped with a frequency converter and air dryer, recently serviced. Technical data: capacity: 17.070 m3/min; 90 kW motor; maximum pressure: 12.8 bar; operating hours: 13435 h; year: 2008. Price: 48,500 net Knedpozzbyfjfx Ahisc Price: 59,655 gross The compressor is in full working order, ready for operation, and comes with a warranty. We also provide service support.

Condition: used, Year of construction: 2018, machine/vehicle number: D18451643, used vacuum pump Busch MM 1104 BP O2 for sale, YOM: 2018 Manufacturer: Busch, Vacuum Pumps and Systems Model: Mink MM 1104 BP O2 S/N: D18451643 MFG: 2018 New air filter Nominal pumping speed: 62 m³/h Ultimate pressure: 60 hPa (mbar) Nominal motor speed: 1800 min-1 Noise level (ISO 2151): 71 dB(A) Weight approx.: 155 kg Dimensions (L x W x H): 1080 x 430 x 590 mm Gas inlet / outlet: G 1 ¼" / G 1" (NPT) Max pressure: 1,2 - 2.0 bar (17-29 psi) Motor: 2.2 – 3.2 kW (3.0 HP), 3-phase, 230/460 V, 60 Hz Lubrification: dry/oil-free Cooling: air-cooled Description: The Busch Mink MM 1104 BP O2 is a specialized, industrial-grade dry claw compressor and vacuum pump. The "BP" designation stands for overpressure/pressure variants, while the "O2" specification denotes it is configured specifically for handling oxygen-enriched gases. 1. The Rotary Claw Pumping Principle The core of the pump consists of two claw-shaped rotors mounted on parallel shafts inside a synchronized pumping chamber. Knsdezz Tm Repfx Ahiec Synchronized Counter-Rotation: The rotors turn in opposite directions. Their movement is precisely synchronized by a timing gear drive located in a separate, sealed gear housing. Contactless Operation: As the claws rotate, they pass incredibly close to each other and the interior cylinder wall, maintaining tight tolerances measured in fractions of a millimetre. However, they never actually touch. Internal Compression: As the claws roll past the inlet port, gas is drawn into the expanding chamber. As rotation continues, the volume between the claws is trapped, compressed mechanically by the geometric shape of the rotors, and then forced out through the discharge port. Because there is zero friction or mechanical wear inside the pumping chamber, the pump requires no internal lubrication. This yields an entirely oil-free exhaust gas stream. 2. Engineering Architecture: The "BP" Designation The BP (Back Pressure / Overpressure) variant modifies the internal geometry and sealing profile of the standard Mink platform. Dual-Function Flexibility: While traditional vacuum pumps exhaust directly to atmospheric pressure, BP variants are built with heavy-duty casings and specialized shaft seals. This allows them to operate as both low-pressure compressors and high-differential vacuum pumps. Variable Pressure Handling: They can safely discharge gas into a pressurized manifold system (up to standard rated overpressures, usually around 2.0 to 2.5 bar absolute) without suffering from seal failure or overheating. 3. Materials & Thermodynamics of the "O2" Variant Pumping high-purity or enriched oxygen (O₂ > 21%) presents severe thermal and chemical hazards. Standard industrial pumps will trigger a catastrophic flash fire if compressed oxygen reacts with hydrocarbon lubricants or friction points. The O2 variant incorporates specific thermodynamic and chemical isolation measures: Gearbox Lubricant: PFPE (Perfluoropolyether) synthetic fluid. It is chemically inert and completely non-reactive with pure oxygen. Price: 3.290 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Änderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: good (used), Year of construction: 2010, This is your *KAESER SK 25 compressor + 500L tank + TBH 23 dryer*. - *KAESER SK 25 - SIGMA screw compressor* - *Part No. 101958.0 / Serial 1562* - *Hour meter:* - Photo 1: *20,704 total hours* - This is low for a KAESER; they typically run for 60,000 hours. - Photo 2: *5,224 hours under load* (1) - This represents the core operating time of the machine. - Photo 3: *314 hours* - Hours under pressure (2). - *Displayed pressure 0.0 bar = normal shutdown, no fault.* - *Complete set:* Knsdpfxoz Ab A As Ahiec - SK25 compressor (15 kW - approximately 2 m³/min at 8 bar) - Vertical tank X. PAUCHARD 500L galvanized (with pressure gauge) - KAESER TBH 23 KRYOSEC refrigeration dryer.

Condition: excellent (used), Year of construction: 2007, PROD. CREEMERS TYPE RCD30/8 S/N CAI242107 YEAR 2007 POWER (kW) 30 OUTPUT (m3/min) 3.54 PRESSURE (bar) 8 Kedpsz E Ht Njfx Ahionc HOURS (RUNNING/TOTAL) 10385/17245 INVERTER no BUILT-IN DRYER no EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no CONNECTION 1 1/2 NEW/USED USED

Condition: used, Year of construction: 2017, operating hours: 20,300 h, functionality: fully functional, overall weight: 350 kg, total length: 1,110 mm, total width: 800 mm, total height: 1,110 mm, power: 15 kW (20.39 HP), fuel type: electric, volume flow: 2,970 m³/h, operating pressure: 10 bar, noise level: 65 dB, protection type (IP code): IP55, ALUP Allegro 15 - 15 kW variable speed rotary screw compressor For sale: ALUP Allegro 15 industrial rotary screw compressor equipped with variable speed control. Thanks to frequency control, the compressor automatically adjusts its speed to the actual compressed air demand. This makes it an energy-efficient solution, especially for fluctuating compressed air usage. Specifications: Manufacturer: ALUP Model: Allegro 15 Power output: 15 kW Kedpez Ahkmjfx Ahijnc Type: Rotary screw compressor Control system: Variable speed / frequency-controlled Controller: ALUP Air Control 4 Condition: Good working order Professional industrial grade Asking price: €3,250 excl. VAT

Condition: excellent (used), Year of construction: 1997, operating hours: 88,000 h, functionality: fully functional, overall weight: 1,200 kg, motor manufacturer: kaeser, power: 75 kW (101.97 HP), fuel type: electric, volume flow: 690 m³/h, operating pressure: 10 bar, pressure (min.): 8 bar, pressure (max.): 10 bar, type of cooling: water, Equipment: documentation/manual, type plate available, KAESER CS121 Screw Compressor (75 kW, 10.3 m³/min, 10 bar) Knjdsz A Irujpfx Ahiec KAESER CS121 75 kW, 10 bar screw compressor for sale in excellent condition. Maintained and fully serviced since new. Last major service performed at the recorded operating hours. Manufacturer: Kaeser CS121 Year of manufacture: 1997 Sigma Control system Serial number: 1211178 Operating pressure: 10 bar Power: 75 kW Capacity: 11 m³/min (695 m³/h) Operating hours: Standby: 86,033 h / Loaded: 28,900 h Sigma Control system Motor speed: 1500 rpm Electrical power: 75 kW Overall dimensions: Length 1960 x Width 1240 (+150) x Height 1440 mm Weight: 1200 kg

Condition: used, functionality: fully functional, machine/vehicle number: 33055, mileage: 39,900 km, power: 235 kW (319.51 HP), first registration: 09/2024, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x2, fuel: diesel, color: orange, driver cabin: day cab, gearing type: semi-automatic, emission class: euro6e, suspension: steel-air, loading space volume: 15.5 m³, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), power assisted steering, traction control, truck registration, The mileage of the vehicles offered may vary, as some vehicles are currently in rental use! Further comparable vehicles are available upon request. Engine D0836LFLBI, reinforced clutch, manual transmission Enfach-H, group switch, ABS, ASR, ESP, disc brakes, electronic braking system EBS, full braking assistant, emergency braking assistant EBA, emergency braking signal, front axle with leaf springs, rear axle with air suspension and level control, differential lock, MAN EVBec engine brake with multiple stages, lane departure warning LDW, daytime running lights LED, fuel filter heated, trailer hitch Rockinger 400G150B (40 mm), steel bumper Cab C (2240 mm wide, 1620 mm long), driver's comfort seat with air suspension and seat heating, driver's comfort seat with air suspension, central locking with remote control, speed limiter, windshield and door windows tinted, tilting roof, heated and electrically adjustable mirrors, electric windows, automatic air conditioning, multifunction steering wheel, safety automatic, cruise control, on-board computer, MAN Mediasystem Navigation Advanced radio, reversing camera, smoker's package, 2 roof-mounted rotating beacons, pre-equipment for Toll-Collect, digital tachograph CONTI, connectivity board module (RIO box), sun visor on driver's door, sun shield horizontal tank with extension piston, tank wall thickness 6 mm, total air volume approx. 15.5 m³ (sludge chamber approx. 14.5 m³ / water chamber approx. 1 m³), water chamber welded into the front of the tank with inspection opening, hydraulically opening full-size lid with hydraulic latch (galvanized) and a suction connection at the bottom and top, 1x piston lock, piston with 2 piston seals and seal pressure regulation, sludge chamber level indicator with external scale with divisions every 500 l and internal float, water chamber level indicator made of flexible transparent hose, filling via a Storz "C" connection and free flow path, discharge chute made of stainless steel, 2 pneumatically operated slide valves, tank emptying: free discharge through the lower suction connection, vacuum pump Gardner Denver Wittig RFW 200 (1240 m³/h) hydraulically driven, 4-way valve pneumatically controlled from the operator station, over-suction protection, oil separator, HD pump Pratissoli KE 30H (approx. 70 l/min at 130 bar) hydraulically driven, protection against water shortage, pressure regulation continuously adjustable, small hand-operated HD hose reel made of stainless steel designed for 60 m HD hose DN 13, 40 m installed, spray gun, transport hose reel for suction hoses with hydraulic drive mounted on the bottom flap with 40 m suction hose DN 80 (divided into 2x 10 m and 1x 20 m lengths), operator station made of stainless steel with LED lighting, radio remote control, hose boxes made of stainless steel on both sides, waste bin made of stainless steel, tiltable at the rear left, tool box made of stainless steel, ladder 3 m long, hand washing basin 30 l with soap dispenser, 1x LED work light at the rear, 2x LED work lights each on the right and left of the tank, 1x LED rotating beacon at the rear, reversing camera Kodpfxoz E N Hlj Ahisnc

Condition: used, functionality: fully functional, machine/vehicle number: 33056, mileage: 19,900 km, power: 235 kW (319.51 HP), first registration: 06/2025, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x2, fuel: diesel, color: orange, driver cabin: day cab, gearing type: semi-automatic, emission class: euro6e, suspension: steel-air, loading space volume: 15.5 m³, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), power assisted steering, traction control, truck registration, The mileage of the vehicles offered may vary, as some vehicles are currently in rental use! Further comparable vehicles are available upon request. Kedoz E N Nyepfx Ahijnc Engine D0836LFLBI, reinforced clutch, manual transmission Enfach-H, group switch, ABS, ASR, ESP, disc brakes, electronic braking system EBS, full braking assistant, emergency braking assistant EBA, emergency braking signal, front axle with leaf springs, rear axle with air suspension and level control, differential lock, MAN EVBec engine brake with multiple stages, lane departure warning LDW, daytime running lights LED, fuel filter heated, trailer hitch Rockinger 400G150B (40 mm), steel bumper Cab C (2240 mm wide, 1620 mm long), driver's comfort seat with air suspension and seat heating, driver's comfort seat with air suspension, central locking with remote control, speed limiter, windshield and door windows tinted, tilting roof, heated and electrically adjustable mirrors, electric windows, automatic air conditioning, multifunction steering wheel, safety automatic, cruise control, on-board computer, MAN Mediasystem Navigation Advanced radio, reversing camera, smoker's package, 2 roof-mounted rotating beacons, pre-equipment for Toll-Collect, digital tachograph CONTI, connectivity board module (RIO box), sun visor on driver's door, sun shield horizontal tank with extension piston, tank wall thickness 6 mm, total air volume approx. 15.5 m³ (sludge chamber approx. 14.5 m³ / water chamber approx. 1 m³), water chamber welded into the front of the tank with inspection opening, hydraulically opening full-size lid with hydraulic latch (galvanized) and a suction connection at the bottom and top, 1x piston lock, piston with 2 piston seals and seal pressure regulation, sludge chamber level indicator with external scale with divisions every 500 l and internal float, water chamber level indicator made of flexible transparent hose, filling via a Storz "C" connection and free flow path, discharge chute made of stainless steel, 2 pneumatically operated slide valves, tank emptying: free discharge through the lower suction connection, vacuum pump Gardner Denver Wittig RFW 200 (1240 m³/h) hydraulically driven, 4-way valve pneumatically controlled from the operator station, over-suction protection, oil separator, HD pump Pratissoli KE 30H (approx. 70 l/min at 130 bar) hydraulically driven, protection against water shortage, pressure regulation continuously adjustable, small hand-operated HD hose reel made of stainless steel designed for 60 m HD hose DN 13, 40 m installed, spray gun, transport hose reel for suction hoses with hydraulic drive mounted on the bottom flap with 40 m suction hose DN 80 (divided into 2x 10 m and 1x 20 m lengths), operator station made of stainless steel with LED lighting, radio remote control, hose boxes made of stainless steel on both sides, waste bin made of stainless steel, tiltable at the rear left, tool box made of stainless steel, ladder 3 m long, hand washing basin 30 l with soap dispenser, 1x LED work light at the rear, 2x LED work lights each on the right and left of the tank, 1x LED rotating beacon at the rear, reversing camera

Condition: used, Year of construction: 2005, operating hours: 43,152 h, functionality: fully functional, machine/vehicle number: API570324, overall weight: 1,076 kg, total length: 1,700 mm, total width: 900 mm, total height: 1,600 mm, space requirement length: 2,700 mm, space requirement width: 1,900 mm, space requirement height: 2,100 mm, power: 37 kW (50.31 HP), fuel type: electric, volume flow: 406.8 m³/h, operating pressure: 13 bar, pressure (max.): 13 bar, Equipment: documentation/manual, refrigerant dryer, type plate available, Complete industrial compressed-air package comprising an Atlas Copco GA37 VSD 37kW variable-speed rotary screw compressor together with a 2018 Hi-Line Tundra 300 refrigerated air dryer. The variable-speed drive automatically adjusts compressor output according to air demand, making this an efficient solution for industrial applications with varying compressed-air requirements. The equipment is surplus to requirements and is available for inspection in Caerphilly, South Wales. The system includes a HI-LINE TUNDRA 300 REFRIGERATED AIR DRYER - Model: Tundra 300 - Year: 2018 - Maximum working pressure: 16 bar - 230V single-phase - Power: 1.73kW - Refrigerant: R407C - Serial No: 18M-014875 - Original operating manual included The dryer has been installed alongside the Atlas Copco to provide a complete compressed-air solution. The equipment is surplus to requirements and is available for inspection in Caerphilly, South Wales. Available for inspection by appointment. Location: Caerphilly, South Wales Buyer to arrange collection/disconnection and transport. Ksdjzzpttopfx Ahienc Further photographs and operating information available on request.