Used Geka Puma 80 S for sale (76,905)

Condition: excellent (used), Here we offer you a Defensor steam humidifier. Defensor Mk5 resistance steam humidifier Steam humidifier Defensor Mk5 The Defensor Mk5 steam humidifiers are manufactured according to the current state of the art and the recognized safety regulations. Nevertheless, improper use of the Defensor Mk5 steam humidifier can pose risks to the user and/or third parties and/or cause damage to property. To ensure safe, proper, and economical operation of the Defensor Mk5 steam humidifier, observe and follow all instructions and safety precautions in this installation and operating manual. Chodpfxjzd Uk Nj Ahmjc Defensor Mk5 Visual series For indirect or direct room air humidification with normal requirements for control accuracy. Defensor Mk5 Visual double unit large 80 Max. steam output in kg/h 80.0 400V/3~/50...60Hz Mk5 ... 80 Unit A: 40 kg/h Unit B: 40 kg/h Type: Defensor Mk5 ... 80 Condition: used Scope of delivery: (See image) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: used, Year of construction: 2021, gearing type: other, fuel type: diesel, first registration: 01/2021, mileage: 1,001 km, driver cabin: other, Vehicle location: Bovenden Type: Silo compressor, removed from a Scania G410 4x2! Chedpfx Ahjzhci Iemsc Delivery rate: approx. 670 m³/h Overpressure: 2.5 bar ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: excellent (used), Vötsch Type: VBT 03/500 Air-cooled Temperature test chamber with spray device Technical description: Data for temperature tests without water: Temperature range -30°C to +80°C Temperature deviation in the stabilized state according to IEC 60068-3-5, depending on the test chamber temperature ± 1 K over time Temperature change rate according to IEC 60068-3-5 Heating: approx. 2 K/min. Cooling: approx. 2 K/min. Data for temperature tests with water Temperature range +5°C to +80°C Possible water level -10 mm to 540 mm Water level = -10 mm The water level is below the support grid Water level = 0 mm The water level is at the top edge of the support grid Data for spray device, standard Number of spray nozzles 6 Spray volume per nozzle 0.5 l/min Data for spray device according to EN 539-2, Method B Number of spray nozzles 6 Spray volume per nozzle 4.5 l/min Additional flooding nozzles 2 Spray volume additional nozzle 6 l/min Compressed air consumption approx. 3 m³/h Data for water tank with preheating Volume approx. 2000 l Temperature range for preheating +5°C to +40°C Temperature change duration Chsdpfx Ahjzh D S Romec Cooling from +18°C to +5°C approx. 15 h Heating from +15°C to +40°C approx. 10 h Data for installation and operation: Test chamber: Width 1120 mm, Depth 840 mm, Height 540 mm Housing: Width 2700 mm, Depth 1300 mm, Height 1575 mm Water tank: Width 1100 mm, Depth 800 mm, Height 2200 mm Feedthroughs 1 feedthrough ∅ 50 mm, installed on the left Test chamber volume: approx. 500 liters Refrigerant R-404a Electrical connection: Rated voltage 3/N/PE AC 400V ± 10% 50Hz Rated power approx. 26 kW Rated current approx. 44.0 A (neutral conductor loaded) Fuse 63 A gG, on-site Weight approx. 890 kg net For your safety as a buyer, the following information! The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have over the phone.

Condition: ready for operation (used), Year of construction: 2008, spindle motor power: 26,000 W, spindle speed (max.): 3,500 rpm, bar diameter (max.): 76 mm, total width: 2,210 mm, total height: 2,480 mm, overall weight: 12,700 kg, controller manufacturer: FANUC, controller model: Series 31i-MODEL A, product length (max.): 4,050 mm, number of axes: 8, This 8-axis DOOSAN PUMA TT2500SY was manufactured in 2008. It features a maximum turning diameter of 390 mm on the upper turret and 300 mm on the lower turret, with a maximum turning length of 350 mm. The machine includes a robust tool turret with 24 stations and a rapid traverse speed of 20 m/min for X1 and X2 axes. If you are looking to get high-quality turning capabilities, consider the DOOSAN PUMA TT2500SY multi-spindle turning machine. Contact us for further details. • Number of axes: 8 (X1, X2, Z1, Z2, Y, B, C1, C2) • Swing over bed: 800 mm • Swing over saddle: 620 mm • Max. turning diameter: Upper turret 390 mm; Lower turret 300 mm • Recommended turning diameter: 255 mm • Max. turning length: 350 mm • Main/left spindle motor power (30 min / cont): 26 / 22 kW • Main/left spindle nose: ASA A2-8 • Right/sub spindle max. speed: 3500 rpm • Right/sub spindle motor power (30 min / cont): 26 / 22 kW • Right/sub spindle nose: ASA A2-8 • C-axis indexing (C1 & C2): 360° in 0.001° increments • Upper turret travel (X1/Z1/Y): 255 / 800 / 120 mm (±60 mm Y) • Lower turret travel (X2/Z2): 190 / 900 mm • Sub-spindle B-axis travel: 810 mm • Rapid traverse (X1/X2): 20 m/min • Rapid traverse (Z1/Z2/B): 24 m/min • Rapid traverse (Y): 7.5 m/min • Turret stations: 24 total (12 upper + 12 lower) • Tooling type/interface: BMT65P • Indexing time: 0.2 s • Rotary tool spindle speed: 4000 rpm • Rotary tool motor power (15 min / cont): 5.5 / 1.5 kW • Machine electric power supply: 95.77 kVA Additional equipment • Chip conveyor • Various static tool holders • Rotary live tool holders Chedpfxeznwf Dj Ahmec • Chucks on both spindles Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: new, Siemens 6SL3000-0BE34-4AA0 SINAMICS/MICROMASTER PX line filter E-version: A S-C315680, unused in original packaging, 100% functional, delivery contents as per photos Chodpfjx Euypex Ahmec

Condition: used, SURFACING AND JIG BORING MACHINE DUAP ZS 80/1400 • Maximum piece length: 1500 mm • Minimum piece length: 70 mm Csdpfx Ahjzcprmsmjhc • Maximum piece diameter: 80 mm • Minimum piece diameter: 10 mm

Condition: refurbished (used), Year of construction: 2015, operating hours: 3,995 h, load capacity: 2,000 kg, lifting height: 2,010 mm, load center: 600 mm, fuel type: electric, mast type: duplex, construction height: 1,530 mm, battery voltage: 24 V, fork length: 1,200 mm, empty load weight: 973 kg, FRIEDMANN FORKLIFTS – REFURBISHED BY EXPERTS. FOR PROFESSIONALS IN THE FIELD. Our forklifts are technically refurbished according to FEM-4.004 and current safety standards – for maximum quality and your safety. From the frame to the battery, including drive, brakes, steering, and electrical system – each vehicle is thoroughly inspected and repaired. * Made in Germany – with responsibility and precision * Rigorous technical inspection * Over 400 vehicles available * Worldwide transport & customs clearance Chedpfx Aezdi E Ujhmsc * Service & spare parts at fair prices * Personal support – even after the purchase Test and get advice on site now – we will find the right solution for you. Reach truck data: Manufacturer: Jungheinrich Type: High-lift pallet truck ERD 220 Drive type: Electric Load capacity: 2,000 kg Year of manufacture: 2015 Operating hours: 3,995 Lifting height: 2,010 mm Mast type: Duplex Free lift: No Initial lift: Yes Overall height: 1,530 mm Fork length: 1,200 mm Unladen weight: 973 kg Load center: 600 mm Tires: Polyurethane Model type: ERD 220 Battery type: PzS Voltage: 24 V Battery weight: 330 kg

Condition: used, Year of construction: 2017, operating hours: 13,000 h, Condition: very good. Chodpfx Ahjzb Sgwemoc Equipment: quick-change system OQ 80.

Condition: used, Year of construction: 2004, Victory 330/80 PLUS Year: 2004 Serial No.: 52863 Operating hours: 103,000 Screw: D40 CC200 A01 4-circuit water cooling Csdpfx Ahszcaxdjmjhc 1x core pull 4x digital input, 4x digital output Few sockets ROBOT: TecnoMatic Micro 210/0184 Year: 2021 Load: 3 kg X-Y-Z – servo C – pneumatic

Year of construction: 2023, condition: new, Offer price for a short time only: € 13,500.00 net. Previous price: € 15,000.00 net. Copper cable granulator (cable shredder) can recycle waste copper wire into separated copper and plastic, the process capacity is 50-80kg/h, the dry physical shredding method does not produce pollution. Design and manufacture 99.99% excellent efficiency and reliability advanced technology: ● 10 years durability, High reliability and sturdiness.... ● Copper rate of 99.99% purity. ● Compact design with an affordable purchase price. ● Robust and powerful copper wire grinder with 5 rotating and 2 fixed blades that grinds cable scrap to 3 mm/4 mm/5 mm. Chodpfxspm E T Te Ahmjc ● Airflow gravity sorting system to guide the copper particles out of the insulation. ● Significant vibration separator to separate the copper granules from the insulation by weight. ● Self-cleaning dust collection system to reduce maintenance time and eliminate dust. ● Total 2 small vibrating screen tables at both outlets to get 99.99% excellent pure copper. Application Types of copper and aluminum wire scrap that the C06 wire granulator can process include: Household wires, Industrial wires, automotive wires, etc. Technical specifications Model V-C06 Power output 13kw range 0.1 ~ 30 mm weight 1200kg Mea 1360*1360*1915mm Process capacity 50-80kg/h

Condition: good (used), Flange connection, V-flange, pipe coupling, weld reducer, reducer, clasp bottom, weld reducers -Reducers: Welding reducers 245 pieces -Type: 80 different versions, see photos / parts list Csdpfeq Rhafex Ahmehc -Price/Sale: complete -Stock: other sizes/types also available, please inquire. -Transport dimensions: 1200/800/H410 mm -Weight: 401 kg

Condition: used, Year of construction: 1990, Max. punching force: 600 kN Max. shear force: 800 kN Punches 27 mm holes in 16 mm steel Codpom T Amuefx Ahmshc Cuts on the flat bar shear up to 400 mm with material thickness of 16 mm steel Hydraulic hold-down device for a sheet metal shear Further technical data on request With a range of punches and dies as desired Weight: approx. 2,000 kg Very good condition

Condition: good (used), turning clamp, 4th axis, rotary table, rotary indexing table, controlled rotary table, dividing head, rotary indexing table, indexing table Csdpfx Ahjvu Tmbjmshc -Manufacturer: Scherer, indexing table from vertical lathe VDZ 80 DS with accessories -Servo motor: Siemens 1FK7042 -Individual components/accessories: see photos -Transport dimensions: 1200/720/H620 mm -Weight: 198 kg

Condition: good (used), Year of construction: 2006, Control cabinet - cooling unit, control cabinet air conditioning unit, distribution cabinet, heat exchanger, control cabinet cooler -Switch cabinet cooling unit: from vertical lathe Scherer VDZ 80 DS -Type: K0154009 SK23 259603 Cedpovw Rzuefx Ahmshc -Dimensions: 950/215/H400 mm -Weight: 40 kg

Condition: used, Year of construction: 1999, gearing type: other, first registration: 01/1999, color: orange, mileage: 1,001 km, empty load weight: 2,390 kg, loading space volume: 5 m³, driver cabin: other, Vehicle location: Bovenden, Superstructure: Wet salt spreader with a useful capacity of 5.0m³ and 2 brine tanks with approx. 2,000l, tank length 2,750mm, The spreader was taken out of service in April 2021. Spreader control V-Pad was installed during conversion (new truck). Dismantling to old control system possible without any problems, circuit diagram available. Operating instructions, spare parts list, workshop manual and declaration of conformity CE marking are available. ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Cedpfx Ahevhh Iysmehc - .

Condition: used, Year of construction: 1990, Max. punching force: 600 kN Max. shear force: 800 kN Csdpfotmyifox Ahmshc Punches 27 mm holes in 16 mm steel Cuts on the flat bar shear up to 400 mm with material thickness of 16 mm steel Hydraulic hold-down on plate shears Large support table on die side with stops Further technical data on request With a range of punches and dies as desired Weight: approx. 2,000 kg

Condition: used, gear motor, electric motor, three-phase motor, electric gear motor -Manufacturer gearbox: SITI, worm gear type MI 60 F GR/19 38/1 Chodpfx Aeuza Rqshmjc -Speed speeds: approx. 30 rpm i= 45:1 -Engine manufacturer: Lafert Type ST 80/4 -Power: 0.52 kW -Protection class: IP55 -Hollow shaft: Ø 25 x 120 mm -Dimensions: 420/220/H200 mm -Weight: 17.4 kg

Condition: used, Clamping devices, clamping tools, clamps, clamps, clamps -Clamp: clamp type 60 - 80 -Intermediate dimension of clamping jaws: 58 - 88 mm -Span width groove: 73 - 103 mm -Number: 12x terminals available -Price per piece Cedpfxegua Hpj Ahmshc -Dimensions: 200/90 / H75 mm -Weight: 2.3kg / piece

Condition: good (used), Heavy-duty casters, heavy-duty wheels, tires, heavy-duty double swivel casters, heavy-duty double fixed casters -Manufacturer: Tente, heavy-duty swivel casters, 4 pieces -Features: Ball bearings, rollers type 07/15 Wheel dimensions: 200 x 80 mm, 2 pieces per stand -Mounting plate: Dimensions see photos Codpfx Aheih S Ngsmjhc -Price/Sale: complete -Dimensions each: 410/345/H290 mm -Total weight: 360 kg, 90 kg/pc.

Condition: used, Gear motor, electric motor -Geared motor for: Steinbock LE 15-60 MK IV A-1 electric forklift truck Chjdsdwhuuepfx Ahmoc -Connection: 24 volts -Dimensions: 400/300/H160 mm -Weight: 25 kg

Condition: used, Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 80 mm Chodpfx Ahsdzzgujmoc -without: interchangeable jaws -Flange: 175 mm -Passage: Ø 19 mm -Dimensions: Ø 175 x 250 mm -Weight: 8.9 kg

Condition: used, Heavy duty castors, heavy duty wheel, tires, heavy duty double swivel castors, heavy duty double fixed castors -Equipment: Ball bearing, VULKOLLAN -Wheel dimensions: 200 x 80 mm -Load capacity: approx. 2500 kg -Mounting plate: 310 x 345 mm -Overall height: 345 mm -Number: 7x wheels available -Price: per piece Cedpfxsdzz Eqe Ahmohc -Dimensions: 410/310/H345 mm -Weight: 91 kg/each

Condition: used, Replacement knife for table shears, replacement blades, cutting knives, shear knives -Number: 2x knives available Cjdpfx Ajcn Shqohmehc -Angle honed: 90° -Dimensions: 20 x 80 mm -Lengths: 2x 2397 mm -Hole spacing from: 73/125/200/200/200/200/200/200/200/200/200/200/200/125/73 mm -Threaded hole -Price: complete -Weight: 56 kg

Condition: good (used), Flat geared motor, geared motor, electric motor, electric geared motor, flat geared motor, flat geared motor -Manufacturer: Nord, flat geared motor Cjdpfxot E D Exj Ahmohc -Type: SK 2080A-80 L/4 i= 10.27 -Speed: 136 rpm -Engine: Type SK 80 L/4 -Power: 0.75 kW -Hollow shaft: Ø 30 x 100 mm -Protection class: IP54 -Dimensions: 320/290/H205 mm -Weight: 20 kg

Condition: used, Year of construction: 1990, turning diameter 250 mm turning length 450 mm control TX8D bore 80 mm spindle speed: 3150 U/min. CNC Lathe with Bar Feed and 3 Turrets Very large spindle bore, with bar loading device Chsdpfx Ajt Hwq Dohmjc Please ask for further details.