Used Gilson Nebula 215 for sale (1,316)

Condition: new, All stainless steel Hopper capacity: 2500 liter Two working shafts with paddles Rotation of shafts in both directions Automatic stopping when cover is open 99 programs Setting of working time Delay start Electric power: 25 KW Installation dimensions of machines in cm: Width: 215 Length: 235 Rcjdpfjunaltox Alaof Height: 225

Year of construction: 2026, condition: new, New notching sawing machine LGF ALFA 55 with Ø 500 mm and Ø 550 mm sawblades. Rcjdpfx Asd Nh S Nslasf Machine in stock Specification: - Machine totally enclosed - Cylinder stroke 825 mm - Adjustable feeding of the sawing carriage 4-10 mt/min - Both saw blades tilting range +/- 45° by means of hand wheel - Possibility to perform cuts at any intermediate degrees - Adjustable working bench in terms of height and depth by means of hand wheels - Tilting fence on the working bench at 60°/90°/-60° - Maximum profile height 215 mm - Maximum profile width 250 mm - Maximim depth of horizontal cut 190 mm - Maximum depth of vertical cut 200 mm - Three phase self-braking motors 2,2 KW (3 HP) - 2800 rpm - Saw blade shaft Ø 30 mm - Working pressure 7 bar Equipment: - Nr. 1 Digital Display on tilting fence - Nr. 2 Digital Display on saw blade tilting - Nr. 1 Digital Display on fence for profile tilting - Nr. 1 Analogical counter on working surface height - Nr. 1 Vertical TCT saw blade Ø 550 mm - Nr. 1 Horizontal TCT saw blade Ø 500 mm - Pneumatic clamps - Automatic lubrication by means of nebulizer - Waste retrieval front tank on wheels - Nr. 2 waste retrieval tanks on the sides - Air filter - Service spanners

Condition: good (used), Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 22 rpm -Power: 0.75 kW -Shaft: Ø 35/70 mm -Construction: B3 -Protection class: IP 55 Redpfx Aed R A Ewslaocf -Dimensions: 590/215/H255 mm -Weight: 46 kg

Condition: used, Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -Shearing tool for square steel: 25/40/50 mm -Shearing tool for round steel: 25/40/55 mm Redpfx Alscwf Daoaecf -Type: 4412151064 -Type: 4412151063 -1x dimensions: 220/206/H30 mm -1x dimensions: 215/205/H30 mm -Weight: 16 kg

Condition: used, Gear motor, electric motor, three-phase motor -Speed: 150 rpm -Power: 0.18 kW Rjdpfxec Nvx To Alaocf -Construction: B3 -Shaft diameter: Ø 30 mm -Protection class: IP 33 -Brake -Number: 1x engine available -Price: per piece -Dimensions: 500/215/H180 mm -Weight: 26 kg

Condition: good (used), Counter support, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 215 to 274 mm, 41 mm high -Drawing with the photos Rodpfx Aljc N Dqajaocf -Number: 2x counter bearings available -Price: per piece -Dimensions: 505/180/H295 mm -Weight: 19 kg

Condition: used, DC brake, braking device, electric motor brake -Manufacturer: AER Statomat -Type: D 53245050 -Current: 150 70 amps -Operating voltage: 380 V AC -Number: 1x power supply available -Price: per piece -Dimensions: 160/215/H155 mm -Weight: 3.2 kg Rcjdpfjd Dh A Nex Alasf

Condition: good (used), Counter holder, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 265 by 215 mm -Bore: Ø 56 mm -Number: 1x counter bearings available -Price: per piece -Dimensions: 260/160/H150 mm Rodpfx Aefibh Ajlaocf -Weight: 10.7 kg/piece

Condition: used, Frequency converters, frequency converters, drive converters, controllers, variable speed drives -Manufacturer: Mitsubishi, frequency converter FR-A044-2.2K-ER -Power: 2.2 kW -Input: 380-460 V 50/60 Hz -Output: 6.0 A -Dimensions: 215/200/H185 mm Rcodpefm A Umjfx Alaef -Weight: 4.8 kg

Condition: good (used), Year of construction: 2006, Screw compressor MARK Type: MAS 7,5KW Year 2006 Power 7,5KW Pressure : 10 Bar Dimensions: L100cm X W 62 cm X H 105 cm Weight: 215 KG Redpfxetx Akns Alascf Ready to use condition.

Year of construction: 2008, condition: good (used), Manufacturer: WORTELBOER HOLLAND Type: PBM 24 Year of construction: 2008 Clamping area 215 - 620 mm Rotation area 170 - 620 mm Stroke 290 mm Max. wall thicknesses 1 cycle 40 mm Rotation speed 25, 38, 50 min TRB Roller conveyor 7000 mm with V Type Construction in height adjustable Specifications Metric US Standard Rcsdporr Ungjfx Alaof There are no specifications for this machine (yet). Dimensions (estimate) length 3200 mm width 2200 mm height 1700 mm weight 12000 kg Please note: The information on this page has been obtained from the manufacturer to the best of our knowledge and belief, and where possible, the information is given in good faith but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: good (used), Bench drill, pillar drill, column drill, column drill -Manufacturer: WMW Heckert, bench drilling machine type BT 12/1 with base frame -Clamping table: 340 x 280 mm -Travel: 370 mm -Spindle holder: MK2 -Projection: 215 mm -Speeds: 224/450/900/1800 rpm -Column: diameter 92 mm -Spindle stroke: 100 mm / depth stop with fine adjustment -Motor: VEB 0.4/0.7 kW with brake -Voltage: 380 V Rcsdpfx Asir E Snslaof -Dimensions: 620/480/H1710 mm -Total weight: approx. 182 kg

Year of construction: 2000, condition: used, fuel type: electric, Running gear, electric motor, DC motor, traction motor, drive motor for order picking truck, drive wheel for electric pallet truck Rodpoi Aqa Hsfx Alascf -Manufacturer: Jungheinrich, chassis drive motor from electric pallet truck ECE 20 -Drive motor: juli GF 114-14/1.2 24V 2.5 kW -Individual components: see photos -Wheel: Ø 215 mm -Number: 1x chassis available -Price per piece -Dimensions: 295/275/H650 mm -Weight: 74 kg/pc.

Year of construction: 2005, condition: used, fuel type: electric, Running gear, electric motor, DC motor, traction motor, drive motor for order picking truck, drive wheel for electric pallet truck -Manufacturer: Jungheinrich, chassis drive motor from electric pallet truck ESE 320 G 20-240-54 -Drive motor: juli GF 106-G3 24V 2.0 kW -Individual components: see photos -Wheel: Ø 215 mm -Number: 1x chassis available -Price per piece Rcjdpfx Aei Aqa Rjlaof -Dimensions: 287/275/H670 mm -Weight: 76 kg/pc.

Condition: used, Tires, solid rubber tires, forklift tires, complete wheels -Manufacturer: Bergougnan, solid rubber tires 2 pieces -Tire size: 250-15 RIM 7.00F-15 -Bolt circle: Ø 225 x 28 mm -Recess: Ø 175 mm Rsdpfxsututvo Alascf -Price/Delivery: complete -Dimensions each: Ø 700 x 215 mm -Weight: 90 kg/piece

Condition: used, Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 50 mm -piston diameter: Ø 40 mm -piston rod: 16 mm (connection M 12 x 1.25 thread) Rcedpob A S D Sofx Alaof -Total length: 215 mm -Total length extended: 265 mm -Air inlet and outlet: adjustable -Number: 6 pieces available -Price: per piece -Weight: 1.2 kg/piece

Condition: good (used), Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Stroke travel: 50 mm -Piston diameter: 40 mm -Piston rod: 16 mm (connection M 12 x1.25 thread) -Total length: 215 mm -Total length extended: 265 mm -Air inlet and outlet adjustable -Quantity: 7 pieces available Price: per piece Rcedpfxeb A Nb Ej Alaef -Weight: 0.9 kg/piece

Condition: new, Year of construction: 2026, functionality: fully functional, 5 kW, 7.5 hp, movable on sturdy swivel casters Rcedpedxxadofx Alaof Cutting height 200 mm Cutting height at 45° 140 mm Swivels to the left up to 60° Swivels to the right up to 45° Cutting length 420 mm at a 90° setting Cutting length at a 45° setting – 300 mm Tilts to the left 60°, tilts to the right 30° using a hand crank from the rear (optionally also from the front) 1 saw blade 520 x 4.4 x 50 mm, 60 teeth, negative bevel Left roller bed with scale and stop slide, length 2000 mm to the saw blade Machine length 4000 mm 1 roller bed extension with scale and 2nd stop slide Mounting side: left, length 4000 mm. This extension roller bed also has an extendable measuring rod with a stop, so that it is possible to accurately cut timber on the left side up to a length of 7500 mm. 1 feed roller bed, mounting side: right, length to the saw blade 2000 mm, can also be extended. Options: pneumatic material clamping Laser cutting guide With appropriate modifications, also suitable for aluminum processing Can also be supplied with a cutting height of 215 mm or 240 mm for an additional charge.

Condition: good (used), Double hydraulic pump, oil pump, gear pump -Manufacturer: ATOS -Rotor pump type: PFED-54150/085/1DTO -Shaft diameter: 32 mm -Number: 3 pumps available Rcsdjddk H Sspfx Alaof -Price: per piece -Dimensions: 215/355/H220 mm -Weight: 44 kg

Condition: used, Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Groove: 25 x 4 mm -Bridge: 6 mm -Thickness: 26 mm -Total height: 215 mm -Tool lengths: 430, 240, 76 mm -Round iron: Ø 20 mm Rcsdodnffwspfx Alaof -Weight: 24 kg

Condition: used, Centrifugal pump, water pump, stainless steel pump, food pump, peripheral impeller pump, coupling housing magnetic coupling centrifugal pump -Manufacturer: Sondermann, coupling housing for magnetic coupling centrifugal pump -Type: MA-EFSK-24-200-1,1/35 -Dimensions: see photo dimensions Rcodpfx Ast Rmaielajf -Dimensions: 230/215/H230mm -Weight: 8kg

Condition: used, mileage: 180,811 km, power: 115 kW (156.36 HP), first registration: 01/2017, fuel type: diesel, overall weight: 7,490 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, loading space volume: 36 m³, loading space length: 6,149 mm, loading space width: 2,480 mm, loading space height: 2,380 mm, Year of construction: 2017, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, ATEGO 816 Furniture Van 6.10 m with Rear Swing Doors * Lined with felt and equipped with 3 recessed lashing rails on each side * Extendable stairs * Payload approx. 2,500 kg Special Clearance Sale Price!!! * Vehicle reference number for customer inquiries: 3574 * Euro VI engine with OBD-C * Lane keep assist * Air conditioning * Electronic Stability Program (ESP) * High performance engine brake * Cruise control * Mercedes PowerShift 3 * Central locking system * Electric window lifters, both sides * Driver's air suspension seat, standard * Electronic braking system with ABS and ASR * Particulate filter * Engine OM934, R4, 5.1 l, 115 kW (156 HP), 650 Nm * AdBlue tank 35 l * Plastic fuel tank 120 l, left side * Digital tachograph, EC, rev counter * Transmission G 70-6/5.94-0.74 * Exterior mirrors, electric, driver's side * S-cab ClassicSpace, 2.30 m, tunnel * Roof hatch/ventilation flap * High storage compartment on engine tunnel Rsdpot D Sdmofx Alaecf * Passenger air suspension seat, standard * Wheelbase 4220 mm * Environmental badge (green) * Full service history * Weight variant 7.49 t (3.4/4.6) * Tubeless tires, 215/75 R 17.5 front axle/front low loader axle * 2/3-door configuration No liability for printing or typographical errors Sale exclusively to businesses Subject to prior sale and change without notice* Changes, prior sale and errors expressly reserved. The description is for vehicle identification only and does not constitute a warranty in the legal sense. The description in the purchase contract is binding. * TOP SERVICE + QUALITY * Leasing/financing/rent-to-own offers available on request Warranty insurance available upon request through the insurer * TÜV / UVV tail lift / tachograph inspection and installation of OBU device through our local partners * Export license plates for 30 days All export documents can be provided upon individual request * TOLL for Toll-Collect can be booked in-house * Free transfer from Stuttgart Airport or Metzingen train station (Württ) * TRAIN STATION FOR ARRIVAL: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP number * ---- Visit us on our website at * Over 200 vehicles in stock at all times

Condition: new, power: 140 kW (190.35 HP), fuel type: diesel, overall weight: 7,490 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, Equipment: ABS, air conditioning, central locking, soot filter, The ISUZU commercial vehicle center in Germany offers competence, service, and consulting: ISUZU M30 H with automatic transmission with torque converter + hooklift JOTHA 5518 for containers from 3 to 10 m³ + winter service equipment 3-year warranty on the base vehicle from the date of initial registration or 100,000 km PAYLOAD 3,260 kg at a GVW of 7,490 kg or 4,270 kg at 8,500 kg Equipment: - 5.2 L Turbo Diesel with Common Rail direct injection 140 kW / 190 HP EURO VI OBD-E (max. torque 510 Nm at 1,600 - 2,800 rpm) - Particle filter system with DPD system and AdBlue (the self-cleaning system allows the filter to be cleaned without a workshop visit, thanks to the new DPD regeneration technology, which indicates when the function is needed. You only need to press the DPD button and the system cleans itself in 20 minutes) - Automated transmission (NEES II) with 6 gears and smooth, finely controllable starting is provided by an integrated torque converter! The gears can also be shifted manually sequentially on the gear selector. Depending on the load, the driver can pre-select whether the vehicle should start in 1st or 2nd gear using a button.) - Engine brake, cruise control - Leaf spring suspension front axle (axle load max. 3,100 kg), leaf spring suspension rear axle (axle load max. 5,800 kg) - Tires 215 / 75 R17.5 M+S - ABS with EBD and electronic traction control on the rear axle (ASR) - Electronic Vehicle Stability Control (EVSC) system - Lane departure warning system - Emergency braking assistant - Wheelbase 3,365 mm - Air conditioning - Suspended driver's seat, passenger double seat bench, 3-seater - Electric windows, electrically adjustable and heated exterior mirrors - Electronic immobilizer, central locking with remote control - Radio with Bluetooth hands-free system, Digital EG - control unit 4.0 (GNNS) - Fog lights, daytime running lights, light sensor for headlights - Driver and passenger airbags, headrests - Height and tilt adjustable steering wheel, interior mirror - Spare wheel with bracket on the vehicle body Additional equipment: - Vehicle underbody and chassis preservation - Ball head coupling 3.5 t trailer load (max. total towing weight 11,000 kg) - Work lights LED 1x rear on the protective grille - Additional LED headlights dimmable incl. turn signals on the cab roof - Rotating beacon, extendable - Warning marking red / white - Engine-mounted hydraulic system with 2 double-acting control functions at the front and 1 working circuit at the rear, drive via engine-dependent tandem gear pump, temperature-controlled oil cooler with fan, hydraulic front lifting device FIEDLER with quick-release plate Rcodpfx Aler Ed D Asajf Vehicle body: Hooklift body type JOTHA CombiCon 5518 - Robust construction and best quality for lasting durability - Transport and unloading of standard containers from 3 - 10 m³ according to DIN 30720 and JOTHA flatbed containers FL 1830 - Lifting capacity 5,500 kg, lifting capacity 800 mm underground 3,900 kg, lifting capacity telescopic extended 3,300 kg - Color: anthracite - Swiveling device with 2 outriggers, cross shaft and chain suspension - Telescopic lifting arms independently controllable, lifting stroke 1,000 mm - Support legs individually controllable - Chain suspension: 8 mm with safety snap hooks, length adjustable - Hydraulic tipping hook - Control block at the front on the body longitudinal beam - Quick-action valve for lifting arm operation, manual control valves with Load Sensing System for fine

Condition: new, Year of construction: 2025, functionality: fully functional, TECHNICAL DATA Table size 1100 x 760 mm Table height 870 mm Non-replaceable milling spindle 30 mm Rjdpfx Alsgz Sifjascf Clamping height 140 mm Height adjustment 140 mm Dust extraction port 2 x ø 120 mm Speed 3000 / 4500 / 6000 / 9000 rpm Color RAL 7035 light gray and RAL 5000 violet blue Net weight approx. 800 kg TECHNICAL DESCRIPTION Robust German engineering Table milling machine with a permanently installed, double-sided swiveling milling spindle for a swiveling range of -5° to +45.5° Operation via handwheel located at the bottom of the machine stand Height and swiveling adjustment via handwheels Analog dial gauges for height and swiveling adjustment 4 speeds: 3000 / 4500 / 6000 / 9000 rpm Belt quick-clamping device Electronic speed display Push buttons for spindle start and stop Left and right rotation Milling cutter quick-change device Finely planed gray cast iron table Controls clearly visible and easily accessible at the bottom of the machine body Milling fence 215, total adjustment via handwheel, including multiplex fence plates Machine socket Lockable main switch Mechanical motor brake Milling guard and pressure device GAMMA V 1629 Arc milling fence 1639 Tapoa CE certified GS certified

Year of construction: 2005, condition: used, For sale: Kardex, Model No.: SHUTTLE-XP-250-3050x813. Control: C2000, OP-C2000 B/W. Type: S/N30/N22S13B/N75D15/20. Serial No.: 05000914/001. Year of construction: 2005. Total load: 2 x 33400 kg. Load per tray: 110 & 220 kg. Tray dimensions: 3050 x 813 mm. Number of trays: approx. 47 pieces (more on request). Shuttle dimensions (W x D x H): 3380 x 2921 x 6450 mm. Power: 3/N/PE400 V, 11 A, 50/60 Hz, 4.9 kVA. Technical details: - Maximum total capacity of the KARDEX Shuttle XP: 2 x 33400 kg - Maximum tray capacity: approx. 47 trays. LIGHT 110 KG & MEDIUM 215 kg each. More trays can be ordered. - Tray dimensions: 3050 x 813 mm - Machine dimensions: Width x Depth x Height: 3380 x 2921 x 6450 mm - Footprint of the system: 9.87 m2 - Capacity with 47 trays: 116.54 m2, each tray approx.: 2.48 m2 - Electronic volume measuring system in 25 mm screen (grid) - An access opening with sliding doors to protect people and stored goods - Control C2000 with graphic display OP-C2000 B/W - Anti-glare lighting above access point - Personal key-code option - Container locking/security - Use of toothed belt for minimum noise - Use of toothed belt for fastest order picking - The working positions can be adjusted individually depending on body size - Distances can be adjusted in steps of 25mm by arranging the support profile. A prerequisite for high compression storage. - Weight management controls the weight of the tray/Shuttle - Weight management controls the speed regulation - Position indicator lamps for indication of the product position For price information, please email: info@ Delivery time: in stock. If necessary, we can order more trays (at cost price) to create more capacity in the Kardex system. Machinehandel De Leeuw BV specializes in used paternoster systems from, among others, Kardex, Hanel / Haenel, Electrolux, Bertello, Megamat, Lista, Denocard, and automatic storage systems such as the Kardex Shuttle XP and XPlus systems. Machinehandel De Leeuw BV Visiting address: Oordeelsestraat 7b, NL-5111 PA Mailing address: Postbus 294, NL-5110 AG Baarle-Nassau / The Netherlands Tel: GSM: Rodpfx Alegbd Dxoaecf Email: info@ Web: