Used Gossen Pantam Constant for sale (1,240)

Condition: used, mileage: 9,925 km, power: 200 kW (271.92 HP), first registration: 07/2017, fuel type: diesel, empty load weight: 9,450 kg, maximum load weight: 8,550 kg, overall weight: 18,000 kg, tire size: 315/70R22.5, axle configuration: 4x4, wheelbase: 4,200 mm, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 3, loading space length: 5,740 mm, loading space width: 2,490 mm, loading space height: 2,070 mm, Equipment: ABS, air conditioning, all wheel drive, cabin, central locking, cruise control, differential lock, fog lights, onboard computer, parking heater, power assisted steering, seat heater, trailer coupling, Vehicle location: Bovenden. ClassicSpace cab, Mercedes PowerShift 3, factory delivery, 1x comfort seat, double passenger bench, seat heating, electric mirrors, heated mirrors, left electric window, right electric window, air conditioning, sun visor, cruise control, auxiliary heater, ABS (anti-lock braking system), constant throttle, differential lock, fog lights, high-beam headlights, storage box, fire extinguisher compartment, leaf suspension, trailer coupling with air and light connections, lashing eyes, underrun protection, side aluminium underride guard, roof hatch, green environmental sticker. Wheelbase: 4200 mm. Body: flatbed with tarpaulin, 7.5t front axle, front axle differential lock, rear axle crown wheel 300 planetary 13.4t, electronic braking system with ABS and ASR, ABS can be deactivated, drum brakes on front and rear axles, condensate monitoring for compressed air system, stabilisers on front and rear axles, residual heat utilisation, hot water auxiliary heater, construction site filter, PSM, comfort locking system, off-road driving programme, Mercedes PowerShift 3, pre-installation for toll collection, LED daytime running lights, skid plate under the bumper, transmission oil cooling, Powertrain Pack 1. Loading height approx. 1440 mm! Spare wheel available at extra cost! ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE, subject to changes, prior sale, and errors! Nledpoyxw N Tsfx Ag Dja

Condition: used, mileage: 13,031 km, power: 200 kW (271.92 HP), first registration: 07/2017, fuel type: diesel, empty load weight: 9,450 kg, maximum load weight: 8,550 kg, overall weight: 18,000 kg, tire size: 315/70R22.5, axle configuration: 4x4, wheelbase: 4,200 mm, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 3, loading space length: 5,740 mm, loading space width: 2,490 mm, loading space height: 2,070 mm, Equipment: ABS, air conditioning, all wheel drive, cabin, central locking, cruise control, differential lock, fog lights, onboard computer, parking heater, power assisted steering, seat heater, trailer coupling, Vehicle location: Bovenden. ClassicSpace cab, Mercedes PowerShift 3, factory delivery, 1x comfort seat, double passenger bench, seat heating, electric mirrors, heated mirrors, left electric window, right electric window, air conditioning, sun visor, cruise control, auxiliary heater, ABS (anti-lock braking system), constant throttle, differential lock, fog lights, high-beam headlights, storage box, fire extinguisher compartment, leaf suspension, trailer coupling with air and light connections, lashing eyes, underrun protection, side aluminium underride guard, roof hatch, green environmental sticker. Wheelbase: 4200 mm. Body: flatbed with tarpaulin, 7.5t front axle, front axle differential lock, rear axle crown wheel 300 planetary 13.4t, electronic braking system with ABS and ASR, ABS can be deactivated, drum brakes on front and rear axles, condensate monitoring for compressed air system, stabilisers on front and rear axles, residual heat utilisation, hot water auxiliary heater, construction site filter, PSM, comfort locking system, off-road driving programme, Mercedes PowerShift 3, pre-installation for toll collection, LED daytime running lights, skid plate under the bumper, transmission oil cooling, Powertrain Pack 1. Loading height approx. 1440 mm! Spare wheel available at extra cost! ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE, subject to changes, prior sale, and errors! Nlsdpfoyxw N Hox Ag Dea

Condition: used, mileage: 10,719 km, power: 200 kW (271.92 HP), first registration: 07/2017, fuel type: diesel, empty load weight: 9,450 kg, maximum load weight: 8,550 kg, overall weight: 18,000 kg, tire size: 315/70R22.5, axle configuration: 4x4, wheelbase: 4,200 mm, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 3, loading space length: 5,740 mm, loading space width: 2,490 mm, loading space height: 2,070 mm, Equipment: ABS, air conditioning, all wheel drive, cabin, central locking, cruise control, differential lock, fog lights, onboard computer, parking heater, power assisted steering, seat heater, trailer coupling, Vehicle location: Bovenden. ClassicSpace cab, Mercedes PowerShift 3, factory delivery, 1x comfort seat, double passenger bench, seat heating, electric mirrors, heated mirrors, left electric window, right electric window, air conditioning, sun visor, cruise control, auxiliary heater, ABS (anti-lock braking system), constant throttle, differential lock, fog lights, high-beam headlights, storage box, fire extinguisher compartment, leaf suspension, trailer coupling with air and light connections, lashing eyes, underrun protection, side aluminium underride guard, roof hatch, green environmental sticker. Nedpjyxw Nyefx Ag Dsla Wheelbase: 4200 mm. Body: flatbed with tarpaulin, 7.5t front axle, front axle differential lock, rear axle crown wheel 300 planetary 13.4t, electronic braking system with ABS and ASR, ABS can be deactivated, drum brakes on front and rear axles, condensate monitoring for compressed air system, stabilisers on front and rear axles, residual heat utilisation, hot water auxiliary heater, construction site filter, PSM, comfort locking system, off-road driving programme, Mercedes PowerShift 3, pre-installation for toll collection, LED daytime running lights, skid plate under the bumper, transmission oil cooling, Powertrain Pack 1. Loading height approx. 1440 mm! Spare wheel available at extra cost! ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: used, mileage: 12,375 km, power: 200 kW (271.92 HP), first registration: 07/2017, fuel type: diesel, empty load weight: 9,450 kg, maximum load weight: 8,550 kg, overall weight: 18,000 kg, tire size: 315/70R22.5, axle configuration: 4x4, wheelbase: 4,200 mm, next inspection (TÜV): 10/2026, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 3, loading space length: 5,740 mm, loading space width: 2,490 mm, loading space height: 2,070 mm, Equipment: ABS, air conditioning, all wheel drive, cabin, central locking, cruise control, differential lock, fog lights, onboard computer, parking heater, power assisted steering, seat heater, trailer coupling, Vehicle location: Bovenden. ClassicSpace cab, Mercedes PowerShift 3, factory delivery, 1x comfort seat, double passenger bench, seat heating, electric mirrors, heated mirrors, left electric window, right electric window, air conditioning, sun visor, cruise control, auxiliary heater, ABS (anti-lock braking system), constant throttle, differential lock, fog lights, high-beam headlights, storage box, fire extinguisher compartment, leaf suspension, trailer coupling with air and light connections, lashing eyes, underrun protection, side aluminium underride guard, roof hatch, green environmental sticker. Nodpfxjyxw I Ns Ag Dela Wheelbase: 4200 mm. Body: flatbed with tarpaulin, 7.5t front axle, front axle differential lock, rear axle crown wheel 300 planetary 13.4t, electronic braking system with ABS and ASR, ABS can be deactivated, drum brakes on front and rear axles, condensate monitoring for compressed air system, stabilisers on front and rear axles, residual heat utilisation, hot water auxiliary heater, construction site filter, PSM, comfort locking system, off-road driving programme, Mercedes PowerShift 3, pre-installation for toll collection, LED daytime running lights, skid plate under the bumper, transmission oil cooling, Powertrain Pack 1. Loading height approx. 1440 mm! Spare wheel available at extra cost! ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: excellent (used), Weiss Weiss Climate Test Chamber WKL 100/70 -70°C to +180°C, Humidity, 100 Litres Compressor has been replaced! Air-cooled For sale is a professional climate test chamber from Weiss Umwelttechnik. This equipment is ideal for material testing, climate tests, as well as temperature and humidity simulation in industrial environments, laboratories, or R&D. The test chamber provides precise test conditions for extreme temperatures and high humidity levels. Data for Temperature Testing: - Temperature range: -70 to +180°C - Temporal temperature deviation at the centre of the usable space: ± 0.3 to ± 1 K - Spatial temperature uniformity (based on setpoint, range tmin to +150°C): ± 0.5 to ± 2 K - Temperature change rate: Heating 3.5 K/min, Cooling 3.5 K/min - Heat compensation: max. 700 W Data for Climate Testing: - Humidification system: - Reservoir capacity: approx. 13 l - Water quality: demineralised - pH value: 6 – 7 - Conductivity: max. 20 μS/cm - Water consumption at constant temp. +40°C, 92% r.h.: 2 l / 24 h - Temperature range: +10 to +95°C - Humidity range: 10 to 98% r.h. - Temporal temperature deviation at the centre of the usable space: ± 0.3 to ± 0.5 K - Spatial temperature uniformity (based on setpoint): ± 0.5 to ± 1.5 K - Temporal humidity deviation at centre: = 1 to ±3% r.h. Internal dimensions: Height 400 mm, Width 470 mm, Depth 345 mm External dimensions: Height 1776 mm, Width 745 mm, Depth 980 mm Mechanical Load Data: - Maximum load of test compartment floor: 10 kg - Per shelf: 10 kg - Total rack load: 50 kg Operating Data: - Test compartment lighting: Halogen bulb 24V, 50W - Rated voltage: 1/N / PE AC 230V ±10% 50 Hz - Rated power: 3.5 kW - Rated current: 15.2 A - Customer-side fuse: 16A slow-blow - Protection rating: Control cabinet IP 22 and touch panel IP 54 Heat Dissipation (air-cooled chambers): - Max. heat output to environment: 2500 W Noise Level: - Sound pressure level (free-field measurement at 2 m in front, 1.0 m height): approx. 59 dB(A) Feedthrough: 50 mm ∅ Interfaces: Ethernet interface (RJ45), USB interface Refrigerants: R404A / R23 Test chamber volume: approx. 100 litres Weight: 210 kg Important Information for Buyers: For your safety, we perform the following steps before sale of our chambers: 1. Functional check and replacement of necessary components Nlsdeyw Nnfopfx Ag Doa 2. If required, refill with legally compliant refrigerant 3. Leak test with certification 4. After successful testing, each chamber undergoes a documented trial run. Condition: used Scope of delivery: (see picture) (Specifications and information may be subject to change and error!) Feel free to contact us by phone for any further questions.

Condition: used, Year of construction: 1980, grinding length 500 mm grinding width 200 mm workpiece height 290 mm Machine from the German Federal Institute of Physics and Metrology - geometrically revised - electrics tested, fully functional, relevant parts replaced - all wear parts replaced - colour light grey, colour condition good Equipment: - electro magnet 500x200mm - grinding spindle overhauled 2-axis display for Y and Z axes Automatic delivery for Y and Z axes Y-axis with zero shutdown Manual hand dresser Stepless speed for grinding wheel V-constant via disc wear Paper band filter system, used Max. height with 250 disc diameter 290mm max. grinding area 600x250mm max. load incl. magnet 100kg Nlsdpswb Hygsfx Ag Doa Warranty: 1 year on geometry and electronics, Germany-wide Delivery: ex works Shipping time: immediately Payment: before pickup Acceptance at our premises Shipping according to your specifications

Condition: used, Year of construction: 2000, grinding diameter 450 mm grinding length 1000 mm centre height 225 mm Photo of machine already delivered in similar scope: -major maintenance -New table geometry -partial painting of the interior grinding wheel equipment LEFT 400x63x127mm (standard) Nlodpfx Agexzk Nie Dea grinding wheel equipment RIGHT 300x40x127mm Internal grinding unit Ø120mm for HF spindles CNC control KELCO 120 C-axis for non-circular grinding. Kel-Poly B-AXIS: CNC-controlled B-axis KELCO 120: v constant 35m/s or 45m/s High-frequency internal grinding spindle Operating unit for MFV and MFZ spindles Hydraulic quill retraction for the tailstock NO micro-adjustment on the tailstock Spring-loaded quill insert Top table cooling Standard workpiece headstock MK 5 DIN 55026 size 5" Micro-adjustment for the standard workhead Dressing device on the lower table Active longitudinal positioning KELPOS, MARPOSS, mounted on the grinding head Tool measuring system KELSET, MARPOSS MARPOSS gate sensor Measuring control MARPOSS Minialsar prepared Paper belt filter

Condition: used, mileage: 67,200 km, power: 251 kW (341.26 HP), first registration: 06/2016, fuel type: diesel, empty load weight: 17,455 kg, maximum load weight: 545 kg, overall weight: 18,000 kg, tire size: 315/60R22.5, axle configuration: 4x2, wheelbase: 4,725 mm, next inspection (TÜV): 08/2027, brakes: engine braking, color: red, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 3, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, differential lock, fog lights, hydraulics, navigation system, onboard computer, power assisted steering, traction control, Vehicle location: Bovenden, long cab, double passenger bench, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, navigation system, ABS (anti-lock braking system), traction control system (ASR), constant throttle, power take-off (PTO), automatic transmission, differential lock, fog lights, storage box, leaf/air suspension, underrun protection, roof hatch, 4-point hydraulic outrigger, radio remote control, green environmental badge. Wheelbase: 4725 mm. Body: Ziegler superstructure with Bronto F32TLK telescopic mast with 4-way outrigger, work basket and remote control. Approx. 3140 operating hours. Vertical reach approx. 32m, horizontal reach approx. 25m. Fire-fighting body manufacturer: Ziegler. Superstructure manufacturer: Bronto Skylift. Special signaling system: - 10x front flashers Hänsch Sputnik nano - Martin horn 2297 GM - 2x front flashers Hänsch Sputnik SL Njdpfx Agjyxr E Ao Dela ACCESSORY DETAILS WITHOUT GUARANTEE; subject to change, prior sale, and errors excepted!

Condition: used, mileage: 199,135 km, power: 184 kW (250.17 HP), first registration: 05/2016, fuel type: diesel, empty load weight: 7,260 kg, maximum load weight: 7,740 kg, overall weight: 15,000 kg, tire size: 285/70R19.5, axle configuration: 4x2, wheelbase: 3,250 mm, next inspection (TÜV): 12/2025, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, cruise control, differential lock, fog lights, low noise, onboard computer, power assisted steering, traction control, trailer coupling, Vehicle location: Bovenden, registration: house, 1x air-suspended seat, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, ABS (anti-lock braking system), traction control (ASR), constant throttle, power take-off (PTO), automatic transmission, differential lock, fog lights, rotating beacon, storage box, air suspension, trailer hitch with air and electric connections, rear stabilizers, lateral aluminum side guard, roof hatch, radio remote control, green environmental badge. Wheelbase: 3250 mm. Body: Meiller hook lift system with remote control. ACCESSORY DETAILS WITHOUT GUARANTEE, subject to changes, prior sale, and errors! Nledpfx Aowzbzreg Dea

Condition: used, mileage: 236,985 km, power: 170 kW (231.14 HP), first registration: 06/2014, fuel type: diesel, empty load weight: 4,833 kg, maximum load weight: 2,657 kg, overall weight: 7,490 kg, tire size: 215/75R17.5, axle configuration: 4x2, wheelbase: 3,020 mm, next inspection (TÜV): 09/2025, brakes: engine braking, color: orange, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel, number of seats: 2, loading space length: 3,800 mm, loading space width: 2,350 mm, loading space height: 400 mm, Equipment: ABS, additional headlights, air conditioning, cabin, cruise control, differential lock, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden, ClassicSpace, Kz. Haus, 1x comfort seat, double bench seat, heated seats, rear window, electric mirror, heated mirror, air conditioning, sun visor, cruise control, switch 6, ABS (anti-lock braking system), traction control (ASR), constant throttle, auxiliary drive, frame panel, differential lock, leaf springs, tow bar air-light hydraulic, tow bar ball head, lashing eyes, U-protection, pendulum flaps, roof hatch, green environmental badge Wheelbase: 3020 mm Structure: Meiller 3-way tipping structure 4.1t front axle, rear axle hypoid 6.2t crown gear 325, differential lock in rear axle, electronic braking system with ABS and ASR, disc brakes on front and rear axles, stabilizer rear axle for extreme high loads, standard cockpit, construction site filter, ClassicSpace, daytime running lights, Meiller 5-piston pump type 254/1, engine brake, ESP, tank capacity: 120l, tipping platform floor with lashing recesses, auxiliary drive MB NA 60-1C with MPA! Nodpjvvbpmofx Ag Djla Loading height approx. 1150mm! ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! - .

Condition: new, TC 205 x 1000 CVS Trade fair machine, color blue Technical data: Nlodpfx Asvzmtzjg Dja Turning diameter over bed: 410 mm Center height: 205 mm Turning diameter over cross slide: 234 mm Turning diameter in offset: 610 mm Bed width: 280 mm Center distance: 1000 mm Number of spindle stages: 8 Speed range: 80 - 2000 1/min Spindle bore: 58 mm Spindle nose: D1-6 Camlock Spindle mount: MK 6 Travel of tailstock spindle: 130 mm Tailstock mount: MK 4 Max. tool size: 22 mm Travel of cross slide: 225 mm Travel of top slide: 130 mm Thread inch: 2 - 72 T.P.I Thread metric: 0.2 - 14 mm Thread D.P.: 4 - 44 D.P. Thread module: 0.3 - 7 MOD Longitudinal feed: (24) 0.035 - 0.5 mm/rev metric (24) 0.0014 - 0.020 inch Cross feed: (24) 0.017 - 0.250 mm/rev metric (24) 0.0007 - 0.0100 inch Motor power: 3.75 kW Coolant pump: 0.10 kW Weight, approx.: 1650 kg Equipment: - CSS for constant cutting speed - Flange - Fixed steady rest - Splash guard rear panel - 4-way tool holder - Foot brake - Emergency stop switch - Coolant device - Chip tray - Fixed centering point - Change gear set - Reducing sleeve for main spindle - Machine shoes - Operating tools - Operating instructions

Condition: new, Special offer price for stock goods! Only while stocks last! Price ex stock, plus VAT. Belt sander: Bernardo type/model: MS 75 x 2000 S Condition: new belt dimensions: 75 x 2000 mm belt speed: 29 m/sec. contact wheel Ø x W: 200 / 80 mm Nlsdpfx Aofnr Aijg Dja surface grinding table: 460 x 75 mm suction connection: 100 mm motor output power S1 100%: 3,0 kW motor input power S6 40%: 4,0 kW Voltage: 400 V length: 1080 mm width: 440 mm height: 1000 mm Weight approx.: 66 kg Features: Good grinding performance due to high belt speed Quick adjustment for horizontal and inclined position Continuous plane grinding surface for optimum grinding of long workpieces Constant belt tension due to spring-loaded tensioning device Universally applicable for sanding edges, surfaces and for cylindrical sanding Including quick tensioning system for fast belt change Easy adjustment of parallel belt run by means of adjusting screw Graphite coating on the face grinding surface increases the sliding properties of the grinding belt Scope of delivery: - Sanding belt K 80 - Hinged protective disc - Grinding and support table - Workpiece stop - Dust extraction nozzle - Separate off button - Base frame

Condition: used, mileage: 60,000 km, power: 353 kW (479.95 HP), first registration: 05/2011, overall weight: 26,000 kg, fuel type: diesel, color: blue, axle configuration: 6x4, maximum load weight: 7,040 kg, empty load weight: 18,960 kg, wheelbase: 4,200 mm, brakes: engine braking, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel-air, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, cruise control, differential lock, fog lights, low noise, onboard computer, power assisted steering, seat heater, traction control, Vehicle location: Bovenden, company headquarters, 1x comfort seat, seat heating, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, cruise control, 16-speed manual transmission, ABS (anti-lock braking system), ASR (traction control), constant throttle, PTO (power take-off), high-mounted exhaust, differential lock, fog lights, beacon, storage box, leaf/air suspension, last axle liftable and steerable, trailer coupling with ball head, low-noise G1, underbody protection, roof hatch, radio remote control, green environmental badge. Wheelbase: 4200 mm. Body: AG HALLER SB7 suction excavator approx. 7.0m³ with remote control, air volume max. 25,000 m³/h at 20,000 Pa vacuum. MAN HydroDrive, ZF 16 S-252 OD transmission, air conditioning! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors excepted! Njdpfx Agsyxpfye Dela

Condition: new, functionality: fully functional, input voltage: 380 V, Equipment: cabin, The EasyArc welding robot from OTC DAIHEN Easy Plug & Play installation with the FD19 V8 + ARXIS/Welbee MIG MAG or the FD19 B6 + A350P/A500P ACDC power source. Welding table with intelligent system grids for clamping and positioning workpieces. Fully assembled and CE-compliant documentation. Optional with a Horizontal Rotary Positioner for tube/pipe welding. Operational with the TeachBox or PhotoTeach. What is supplied: OTC MIG/MAG or TIG power source Nledpfx Agjywgq Rj Doa OTC FD19 V8 or B6 Robotic arm 1200x2000mm 3D Siegmund clamping table Housing CE Documentation TeachBox or PhotoTeach controller Optional: Horizontal Rotary Positioner for welding tubes/pipes. Mobile compact design: space-saving, flexible and economical to purchase. Simple operation with OTC Easy Teach control: minimum time required to create the welding programme, even without extensive training. Welding programme creation even without extensive training Stable and precise welding robot: relieves employees and ensures optimised, constant welding quality optimised, constant welding quality Safety technology according to CE standards: Electrically monitored, lightweight protective housing. Feel free to contact us for more information.

Condition: like new (used), functionality: fully functional, Stringer milling device SCHEER TW 4 + Router HM 16 Everything is in excellent, like-new optical and technical condition, the device has been used very little. Fully functional—ready to use immediately. All machines are intended for commercial use, no DIY store scrap. Treppenwangenfräsgerät SCHEER TW 4 With this device, you can mill treads and risers very precisely and accurately. Nlsdpoyxr T Tefx Ag Dja The hand crank even allows you to machine curved joint surfaces; you can also use it for recesses in other panel materials, such as worktops. Equipped with hardened guide rods, on which the cross support with router is mounted. Featuring ball bearing guide bushings, allowing the device to move very easily, accurately, and safely. The device can be clamped securely onto the stringer or similar workpieces using four screw clamps. The cross support has two stops each in both the longitudinal and transverse directions. Comes with two positioning angles. Complete with manual, tooling, and all accessories. Longitudinal milling travel: 750 mm; transverse milling travel has been increased from 75 mm to 320 mm, significantly expanding the machine's application range. To increase the milling travel, a new base frame made of aluminum profiles was manufactured. The modification work was carried out by a reputable engineering company. Everything works perfectly; this machine is a true one-off. Router SCHEER HM 16 Very good condition, with only minor signs of use. Very robust, thanks to triple-bearing router spindle. Accurate concentricity and flawless milling results. Precise column guidance and torsion-resistant milling table. Constant speed, even under heavy load. Equipped with high-performance motor (shows almost no signs of fatigue). Long service life thanks to soft start (full-wave electronics). Bearings are in good condition. The machine is suitable for the toughest continuous milling operations. Good visibility of the milling spindle; chips are blown away by a powerful fan. 220V, 1800W. Speed: 18,000 rpm. Fully functional. With M16 female thread mount.

Condition: new, power: 350 kW (475.87 HP), fuel type: diesel, empty load weight: 16,128 kg, maximum load weight: 9,872 kg, overall weight: 26,000 kg, axle configuration: 6x4, wheelbase: 3,900 mm, next inspection (TÜV): 01/2027, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, loading space length: 4,800 mm, loading space width: 2,380 mm, loading space height: 800 mm, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, crane, cruise control, differential lock, electronic stability program (ESP), fog lights, navigation system, onboard computer, parking heater, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden. ClassicSpace, Active Brake Assist, Mercedes PowerShift 3, steel body, with accommodation, 1x comfort seat, seat heating, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, navigation system, ABS (Anti-lock Braking System), traction control system (ASR), constant throttle, power take-off, differential lock, fog lights, work lights, storage box, leaf suspension, trailer coupling air-light-hydraulic, lashing eyes, underrun protection, swing tailgates, roof hatch, crane behind cabin, emergency stop, grab control, foldable, 2-point hydraulic support, radio remote control, four hydraulic extensions, green environmental sticker. Wheelbase: 3,900 mm. Body: 3-way tipper body with pneumatic tailgate operation, drop sides/rear wall & F255A.2.24 xe-dynamic crane, remote control. 9t front axle, rear axle planetary gear 13.4t, electronic braking system with ABS and ASR, ABS deactivatable, disc brake with full protection on front axle, drum brake on rear axle, condensate monitoring for compressed air system, electronic parking brake, stabilizer on front axle, reinforced stabilizer on second rear axle, residual heat utilization, construction site air filter, seat belt monitoring, smoker package, PSM 2nd generation, reversing warning system, ClassicSpace, light and rain sensor, comfort closing system, off-road driving program, Mercedes PowerShift 3, PowerShift Advanced, navigation system, multimedia cockpit, preparation for toll logging, daytime running lights, high performance engine brake, MB 124-10c MPA N-/M drive speed PTO, grounder, transmission oil cooling, ESP, lane keeping assist, traffic sign assist, Active Brake Assist 5. Nledpfxsycgqge Ag Dsa Load diagram: 3m-6150kg, 4.45m-4650kg, 6.45m-3115kg, 8.45m-2280kg, 10.60m-1775kg, 12.70m-1415kg, mechanical extension up to 19.25m-700kg possible for an additional charge! New vehicle from stock available with one-day registration in 01/2026! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, 1 Panel Sizing Saw with Storage System Manufacturer: HOLZMA Model: PROFILINE HPL 530/56/22 – right-hand machine Year: 2008 Including integrated storage system PROFI TLF610/10/05/L Manufacturer: BARGSTEDT Year: 2013 Woodstore inventory management software, offcut management, etc. Storage area approx. 37 x 11.5 m Max. stack height in storage: 2,500 mm Speed Concept: sets completely new standards that revolutionize panel dividing technology. + Significantly higher speed and dynamic acceleration of the saw carriage. + Extreme acceleration of the program pusher. + Central angle alignment device. + Electronic height control of the pressure beam. + Optimized motion sequences via integrated gripper measuring system. Cutting length: 5,600 mm Cutting width (program pusher travel): 5,600 mm Panel rotation device for head cuts Laser guide light: marks the cutting line on the workpiece for visible or scribed cuts. Lift table feeding Lift table size: 5,600 x 2,200 mm PROFILINE VAC infeed carriage 5,600 mm Separate infeed carriage for gentle loading of sensitive single panels via vacuum, as well as efficient infeed of panel packs. Saw blade projection: 130 mm Saw carriage feed: Forward 1-150 m/min Reverse constant 150 m/min Program pusher speed: Forward/reverse 90 m/min (in EU countries forward = 25 m/min) Automatic pressure beam height control: yes Automatic cutting height: yes Nlsdpeyw Ivhefx Ag Dsa Adjustable pressure beam contact pressure: yes Adjustable gripper contact pressure: yes Gripper release: yes Fully air-cushioned machine table (saw body): yes Angle alignment device: Min. alignment width: 0 mm Max. alignment width: full cutting length Main saw motor (at 50 Hz): 18.0 kW Frequency control: 1,700 – 4,200 rpm Scoring saw motor: 2.2 kW Operating voltage: 400 V / 50 Hz Working height: 1,020 mm SPZ UNIT W. LIFT ELEMENT 2-FINGER 11/510/530 AUTOMATIC EJECTOR FENCE Program-controlled ejection of panel packs to the area of the air cushion tables. FULLY AUTOMATIC SCORING SAW ADJUSTMENT TYPE 530 Camera-controlled GROOVE PROGRAM (AUTOMATIC) Groove program with graphical input and sequence display. Positioning accuracy: Groove depth is steplessly variable via control (hydraulic stop). CUT-OUT/STRESS RELIEF CUTTING PROGRAM LABELLING WITH PART GRAPHICS LABEL PRINTER TYPE PICA 108 Thermal / thermotransfer label printing station OPTIMIZATION PROGRAM 'CAD-PLAN' -JUST-IN-TIME- Additional 'Just-in-time' function (possible operating modes): 1. Optimization at the saw ----- - Possible import of part lists from industry packages, Excel, etc. - Incorporates available offcuts in optimization - In case of production interruption, unproduced parts can be re-optimized - Flexible selection of which parts with which material are optimized and produced at which time 2. Transfer of optimized data to the saw - Modification of optimized cutting plans at the saw: - Delete/add parts - Add available offcuts - Change panel sizes - Combine runs, etc. New optimization is performed directly at the saw. ONLINE DATA TRANSFER + USB PORT CAMERA MONITORING OF THE FEED AREA Material specifications for lift table feed: Max. waviness: 40 mm/m Panel thickness min. 6 mm Thickness tolerance per panel max. +/- 0.2 mm Stacking accuracy +/- 50 mm

Condition: used, mileage: 525,200 km, power: 290 kW (394.29 HP), first registration: 05/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: silver, gearing type: automatic, emission class: euro6, total width: 2,600 mm, total height: 3,750 mm, loading space volume: 41 m³, loading space length: 7,300 mm, loading space width: 2,490 mm, loading space height: 2,280 mm, Year of construction: 2018, Equipment: ABS, air conditioning, navigation system, tail-lift, * Frigoblock refrigeration unit for in-transit operation with generator * Single-chamber refrigerated cargo area * Constant throttle valve * Navigation system * Lane keeping assistant * Heated seats * Cruise control with distance warning and emergency braking (Active Brake Assist) * Rear-view camera * Wüllhorst tail lift, 2,500 kg capacity * Automatic transmission * Euro 6 * Differential lock Nlsdpfeyw Dpqjx Ag Dsa * Full air suspension * Rear-view camera * Spoiler * Automatic climate control * Cargo space interior: 7,300 x 2,480 x 2,200 mm * Tyres: 1st axle=385/55 R 22.5, 2nd axle=315/70 R 22.5, 3rd axle=385/55 R 22.5

Condition: new, Year of construction: 2025, functionality: fully functional, Cutting range: 5300 x 2240/2100 x 80 mm Cutting depth: 80 mm Motor power: 5.5 kW Continuously adjustable scoring unit EPS.X – Electronic positioning system for the X-stop 12" touchscreen display Saw Frame • Manufacture of precision components to 1/100 mm accuracy • Solid, self-supporting, permanently welded, torsion-resistant saw frame • TRK1 full-surface support wall made of birch plywood with integrated small parts support • Auxiliary stop profile with its own measuring tape and 3 auxiliary stops for repeat cuts • Automatic detection of central support • Automatic roller locking during cutting Saw Beam • Stable, durable steel construction of the saw beam • Automatic saw beam locking with interface detection Saw Unit • Play-free, easy-running guides • Robust bearing of the motor carriage ensures high cutting precision • Powerful, high-torque 5.5 kW motor (7.5 HP) • Increased operator comfort thanks to largely automated operation • Laser-assisted display for horizontal cuts • Automatic motor carriage clamping • Automatic plunging and swiveling of the saw motor • Pneumatic clutch for easy switch-over to manual operation • SUPERSILENT sound insulation to reduce saw blade noise • Electromagnetic motor brake • ProLock Easy-Fix tool clamping system Control • 12" touchscreen control panel with optimized user guidance • Multilingual user interface • Tool database for maximum flexibility and repeat accuracy • Fully automatic cutting process • Infinitely variable feed speed from 10–25 m/min • Selectable sawing cycle • Panel end detection • Constant return speed Nljdpfxeyx H Dts Ag Dea • Operating hours counter • Network connectivity • UPS 24VDC for touch PC (uninterruptible power supply) • Automatic saw beam positioning (ASP) Dimension Setting • Digital measuring system DMS.x (horizontal axis for vertical cuts) • Electronic positioning system EPS.y incl. ABO (vertical axis for horizontal cuts) Design, Ergonomics • Typical STRIEBIG product design • Multiple award-winner (including the Design Prize Switzerland) • Ergonomically optimized for function and user Installation • Wall-mounted or free-standing installation possible

Condition: like new (used), Year of construction: 2022, functionality: fully functional, 1. Automatic Textile Printing Machine VERSATRONIC S-line 🔹 Configuration: • 8 stations/pallets • 6 printing heads • Maximum print area: 400 x 450 mm • Pallet drive: frequency-controlled AC servo drive 🔹 Squeegee-drive system: • AC servo high-precision drive • 4-cylinder POWER-Squeegee system 🔹 Main Control Unit: • Rotatable control panel with 7” SMART touch display • Microprocessor with diagnostic program 🔹 Printing Programs: ✅ 6 standard printing programs ✅ High-density program ✅ MULTIFLASH program ✅ Cool-stop mode ✅ Sampling program ✅ Start-up/finishing program ✅ Screen-Cleaning mode, stopping pallets between print stations Fobqfb Ijv Ng T Reitjgf ✅ Free-wheel-mode _____ 2. Accessories • 8 pcs aluminum sandwich pallets 420 x 500 mm with neck • 8 pcs aluminum sandwich pallets 320 x 500 mm with neck • 8 pcs aluminum sandwich pallets 230 x 500 mm with neck • 8 pcs aluminum sandwich pallets 130 x 500 mm without neck • 6 pcs QS-printing squeegees 410 mm, 65° Shore • 6 pcs QS-printing squeegees 310 mm, 65° Shore • 6 pcs QS-printing squeegees 210 mm, 65° Shore • 6 pcs QS-printing squeegees 120 mm, 65° Shore • 6 pcs aluminum flood bars 410 mm Nedpov Ng T Rjfx Ag Dsla • 1 pcs squeegee holder for wall mounting • 6 pcs micro-registration systems with control on each printing head • 6 pcs 3-point pneumatic screen-locks 🔹 Machine Dimensions: • For a print size of 400 x 450 mm, a frame of 530 x 780 mm is required (profile: 25x25/30x30 mm) • Machine diameter: 3.080 mm 🔹 Energy Requirements: • Power supply: 3x400V V, PEN, 3.7 kW, 5.6 A • Compressed air: 8 bar, approximately 300 liters/hour 🔹 Transport Dimensions: • S-LINE 8: • Gross weight: approximately 900 kg _____ possible to buy to the additionaly: 3.1 Automatic Quartz-flashcure MAGIC 5025 • Medium-wave IR radiators • Radiation area: 500 x 500 mm • With IR-Pyrometer for continuous measurement of print material temperature • Ensures constant temperature throughout the printing process, preventing overheating of textiles and pallets • Power supply: 9 kW, 14 A, 3x400V • Movable stand with wheels + 2500,- € + VAT

Condition: used, mileage: 323,295 km, power: 290 kW (394.29 HP), first registration: 01/2019, fuel type: diesel, empty load weight: 12,970 kg, maximum load weight: 13,030 kg, overall weight: 26,000 kg, tire size: 315/70R22.5, axle configuration: 6x2, wheelbase: 5,500 mm, brakes: engine braking, color: yellow, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, loading space length: 9,040 mm, loading space width: 2,500 mm, loading space height: 2,098 mm, Equipment: ABS, air conditioning, cabin, central locking, cruise control, differential lock, electronic stability program (ESP), fog lights, onboard computer, parking heater, power assisted steering, seat heater, tail-lift, traction control, Vehicle location: Bovenden, ClassicSpace, Active Brake Assist, Mercedes PowerShift 3, large cab, 1 comfort seat, 1 bed, seat heating, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, auxiliary heater, air horn, ABS (anti-lock braking system), traction control (ASR), constant throttle, fog lights, tool box, air suspension, aluminum tank, last axle liftable, last axle hydraulically steered, lashing rails, underrun protection, mechanical ramps, side aluminum underrun guard, roof hatch, aluminum tail lift, upright, green environmental badge. Wheelbase: 5500 mm Superstructure: damaged insulated refrigerated box body with underfloor cooling unit Carrier Supra 950U & 2.5t tail lift BÄR BC 2500 S4. The vehicle has damage to the rear left of the body! Nledpfx Agoyi Hpvo Dsa Front axle air-suspended, 8t front axle, rear axle hypoid bevel gear 440 13t, 7.5t tag axle steered/relievable/liftable, electric brake system with ABS and ASR, disc brakes on front and rear axles, condensate monitoring for compressed air system, additional stabilizer on rear/tag axle, front underrun protection made of aluminum, smoker’s package, comfort lower bed, residual heat utilization, hot water auxiliary heater, start-off aid, ClassicSpace, comfort central locking, driving program "economy", Mercedes PowerShift 3, pre-equipment for toll recording, LED daytime running lights, high performance engine brake, powertrain pack 2, chrome package, ESP, lane keeping assist, attention assist, Active Brake Assist. Operating hours cooling unit approx. 2327h! Equipment details without guarantee, subject to change, prior sale and errors excepted!

Condition: new, Year of construction: 2025, Technical data: • Cutting diameter: 335 mm • Blade dimensions: 4400 x 34 x 1.1 mm • Work table height: 750 mm • Feed range: 5 to 2300 mm per stroke • Cutting area at 90°: flat elements 500 x 335 mm • Cutting range at 45°: approx. 330 mm • Cutting area at 45°: flat elements 320 x 335 mm • Round cut at 45° (left side): 305 mm • Cutting area at 45° (left side): flat 305 x 335 mm • Maximum cutting range at 30°: approx. 180 mm • Cutting area at 30°: flat 170 x 335 mm • Cutting speed: continuously adjustable from 15 to 150 m/min • Maximum load material: 250 kg/m • Total installed power: 3.0 kW • Machine weight: approx. 2550 kg Nljdpfx Aswf Hm Ieg Doa • Required installation space: approx. 4350 x 2300 x 1900 mm Standard equipment MEBAeco 335 DGA-2300: • Access protection in accordance with CE thanks to a light barrier. • Robust, two-column linear construction of the MEBA band saw with automatic material feed system (range 5–2300 mm per stroke). • CNC control for easy program entry and visualization. • Automatic cutting at any angle in the range of 30°–135°, with the possibility of setting the length and number of elements. • Possibility to create and manage up to 255 cutting programs. • Intuitive data entry reduces the risk of operator errors. MEBA High Performance Package: • Saw feed by servo drive and ball screw mechanism with automatic monitoring of cutting pressure and feed. • Constant and optimized working conditions when cutting a variety of materials, including thin-walled profiles. • Precise and fast material positioning by means of AC rack and pinion drive with a stroke length of up to 2300 mm and integrated roller conveyor up to 3000 mm long. • Clamping jaw system that allows opening from both sides, with bars for transporting heavier materials. Design and functionality: • Robust saw frame made of welded vibration-resistant steel. • Saw blade set at a 3° angle to the table for increased efficiency and blade life when cutting steel profiles. • Integrated saw blade guides with precision bearings to minimize band deflection. • Carbide sliding guides for maximum precision. • Point 0 (rotate the miter saw) located at the intersection of the blade with the movable clamping jaw, eliminating the need for length correction when changing the angle. • Automatic programming of angles on the control panel. Vice system: • Patented double angle vice system with automatic adjustment of position to the cutting angle, which ensures a secure and precise grip of the material close to the cutting line. • Clamping performed by full-stroke actuators. Other functions: • Automatic lowering of the saw frame in front of the material when starting the cut, minimizing cycle times. • Optimal conditions for both single and serial cuts. • Infinitely variable band saw drive controlled by an inverter (15–150 m/min). • Precisely pre-machined elements eliminating play.

Condition: good (used), Year of construction: 1999, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine Specification • Work table 1800 x 600 mm with 4 T-slots • Traversing arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots, 18 mm, rear side of machine base • 2 T-slots, 18 mm, left side of machine base • Thread cutting unit • Central lubrication • Coolant system • Machine light • CE marking • Safety device • USB interface Dimensions and Travel Ranges Tool holder: SK 40 Column diameter: 195 mm Table dimensions: 1800 x 600 mm Number of T-slots: 4 Distance between T-slots: 125 mm Quill travel (Z-axis): 200 mm Column travel (W-axis): 410 mm Distance spindle nose – table (min): 70 mm Distance spindle nose – table (max): 680 mm Distance spindle nose – floor (min): 970 mm Distance spindle nose – floor (max): 1580 mm Drilling radius: 540 – 1590 mm Working table height: 900 mm Machining Capacities Drilling capacity (solid): Nodpfx Aoyxw Ddeg Dola St 60: ⌀ 40 mm GG 22: ⌀ 50 mm Tapping: St 60: M36 GG 22: M42 Main Spindle Drive AC motor, frequency controlled: 5.5 kW at 100% duty cycle Speed range: 15 – 2800 rpm Torque: max. 250 Nm Constant torque from 15 – 2000 rpm Feed Drives X-axis - AC servo motor: 0.25 kW Y-axis - AC servo motor: 0.25 kW Z-axis - AC servo motor: 4.50 kW W-axis - AC servo motor: 2.50 kW Rapid traverse (X/Y/Z): 7.5 / 7.5 / 5 m/min Rapid traverse (W): 3 m/min Infinitely variable feeds: 5 – 2000 mm/min Accuracy Positioning accuracy X, Y axis (over 1200 mm): ± 0.075 mm Electrical Data Operating voltage/frequency: 400 V / 50 Hz Control voltage: 24 V Hydraulic unit for clamping: 0.75 kW Total connected load: 13.0 kVA Weight (Danumeric 440, without packaging, with 1800 x 600 mm table): 2800 kg CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Display: TFT flat screen, backlit, easily readable from all sides, 215 x 160 mm Position indication: Cartesian or polar, absolute or incremental Measurement units: mm or inch or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions based on machining operation, material-dependent cutting data suggestions Tool management: max. 500 tools Subprogram function: yes Machining Cycles Standard software options: Conversational programming, 38 reference point shifts, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable entry functions Zero point determination: cycles for determining reference points by manual probing of the workpiece for: - Arbitrary clamped rectangular parts - Arbitrary clamped round parts - Centering of cast and flame-cut parts - Angle position detection for round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns

Condition: used, mileage: 287,130 km, power: 213 kW (289.60 HP), first registration: 07/2014, fuel type: diesel, empty load weight: 9,054 kg, maximum load weight: 8,946 kg, overall weight: 18,000 kg, tire size: 295/80R22.5, axle configuration: 4x2, wheelbase: 3,575 mm, next inspection (TÜV): 07/2026, brakes: constant throttle, color: orange, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, cruise control, differential lock, fog lights, onboard computer, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden, registered as house, 1x comfort seat, rear window, electric mirrors, heated mirrors, left electric window, right electric window, air conditioning, sun visor, cruise control, ABS (anti-lock braking system), traction control (ASR), constant throttle, power take-off, AS-Tronic automatic transmission, work lights, leaf suspension, trailer coupling with air and lights, container locking, underride guard, rear support, side aluminum underrun protection, roof hatch, green environmental sticker. Wheelbase: 3575 mm. Body: 14t telescopic skip system Hiab Multilift SLT 142. ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale, and errors reserved! Nlsdpfx Agsx Dc Uij Dja

Condition: new, power: 353 kW (479.95 HP), fuel type: diesel, overall weight: 35,000 kg, axle configuration: 8x8, wheelbase: 4,775 mm, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, all wheel drive, cabin, central locking, cruise control, differential lock, fog lights, onboard computer, power assisted steering, seat heater, trailer coupling, Vehicle location: Bovenden, house registration, 1x comfort seat, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, ABS (anti-lock braking system), constant throttle, PTO, automatic, differential lock, fog lights, work lights, leaf suspension, trailer hitch air+light, hydraulic transverse locking, green environmental sticker Wheelbase: 4775 mm. Body: 26t Hyva T26-55-S hooklift system for containers from 4.3m to 6.6m. Gearbox ZF 12.28, ABS, EBS, MAN EVBec high-performance engine brake, drum brakes on all axles, emergency brake assist, air conditioning, MAN EasyStart, ESP, differential lock on all axles, LED daytime running lights, lower radiator protection, high build, KSM module, cool box, PTO, engine dependent, flywheel, spline hub 8x32x36 (DIN ISO 14), f=1.233, 650/720 Nm continuous/short! Frame length approx. 6400mm! Frame height approx. 1210mm! Nedpfx Agjwnp D Is Dsla Upon request and for an extra charge, also available with a different hooklift system! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors! - .