Used Hauslhof Ko880-250-5,5 for sale (10,596)

Year of construction: 2020, condition: as good as new (ex-display), High performance Belt grinding device height adjustable 0-90°. Maximum usable face grinding area Belt adjustment with fine adjustment Longitudinal stop for material guide Perfectly balanced and low vibration Connection on both sides for dust extraction Ø 50 mm Motor protection switch with undervoltage release Fixed stop 1 Sanding belt standard (brown), grit 80 1 grinding wheel 250 x 40 x 51 mm, grit 80 Spark protection Connection cable with CEE plug with base frame, integrated suction and brake Pjdpfoiiywzox Aqlspw Also other models available from stock! Inquire about the current stock.

Condition: good (used), Year of construction: 2012, Kent KGS 250 WM1 surface grinding machine year of manufacture: 2012 Ppsdpfxex A D H Rj Aqlow max. grinding range: 460 x 200 mm max. height: 300 mm top dresser electronic handwheel variable magnetic force central lubrication touchscreen with settings for rough and finish grinding, etc. cooling water/filter tray documentation machine is powered on for inspection

Condition: used, Year of construction: 1984, Second-hand machine Year of manufacture: 2007 Features and technical specifications: - Motor 4.7/5.7 kW, pole-changing - with clockwise/anti-clockwise rotation - MK 5/30 mm milling arbor - Height adjustment via handwheel Ppedpfszk N R Rsx Aqlsw - Speeds: 3000/4500/6000/9000 rpm - Milling stop with metal jaws Mounted on a round turntable and therefore rotatable through 360° - with table extension on both sides, featuring extendable frame supports - with a roller table attached to the left-hand side Please note! The table extension was fitted at a later date! To use the roller table, it must this must be removed again! - with 4-roller feed mechanism, built in 2007 - Dimensions: 240x65x120 - Weight approx. 900 kg Availability: at short notice Location: 63934 Röllbach

Year of construction: 1998, condition: used, Second-hand machine Year of manufacture: 1998 Features and technical specifications: Ppsdpfx Aqjzk Nyfjljw - Max. operating pressure: 10 bar - Compressed air receiver: 250 l - Maximum sound pressure level: 76 dB(A) - Theoretical suction volume: 630 l/min - Effective delivery rate at 6 bar: 440 l/min - Number of cylinders: 2 - Speed: 1,450 rpm - Oil capacity: 1.2 l - Oil top-up quantity: 0.22 l - Motor: 3 kW / 400 V - Max. switching frequency: 20/h - Start-up: Direct start Weight 240 kg Availability: at short notice Storage location: 63934 Röllbach

Condition: excellent (used), Year of construction: 1981, Center height: 130 mm Swing diameter over bed: 260 mm Swing diameter over carriage: 140 mm Distance between centers: 600 mm Spindle bore: 30 mm Ppodpfexz Rfkox Aqlew Bed width: 255 mm Spindle mount: DIN 55027 size 5 Speed range: 35.5 - 3,150 rpm Longitudinal feed range: 0.04 – 0.4 mm/rev Transverse feed range: 0.02 – 0.2 mm/rev Metric threads: 0.2 – 18 mm Inch threads: 2 – 76 TPI Module threads: 0.4 – 13.5 module Diametral pitch threads: 2.6 – 36 DP Tailstock taper: MT 4 Drive power: 3 kW Dimensions (L x W x H): 2,140 x 850 x 1,400 mm Weight: 1,100 kg Accessories / Special features: • 3-jaw wedge bar chuck FORKARDT F 160 with jaw safety, Ø 160 mm • Quick-change tool post system "Multifix" size B • Coolant system with chip guard • Chuck guard • Hardened bedways • Lighting • Bed stop • Emergency stop switch New brake discs, new drive clutch, new V-belts, and new gearbox and V-belt bearing in 2026. Repair costs: €3,950.00 net. Options: New 2- or 3-axis digital readout K+C, fully installed – upon request Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, maximum load weight: 22,725 kg, overall weight: 31,000 kg, axle configuration: 2 axles, first registration: 04/2023, next inspection (TÜV): 04/2027, total width: 2,600 mm, total height: 4,000 mm, Year of construction: 2023, SOR 2-AS CHILLED/FREEZER SEMI-TRAILER, GALVANIZED CHASSIS, STEERING AXLE, 270 HIGH, 250 WIDE Body: Chilled/freezer transport Date of first registration: Valid until (MOT): - Make and model: SOR Iberica SOR-S2E, built by Burgers Dimensions (L x W x H): 1350 x 250 x 270 cm (internal) Unladen weight: 8,275 kg Payload: 22,725 kg GVW: 43,000 kg Refrigeration unit: Carrier Vector 1550, diesel and electric Operating hours: 26 hours Tail lift: None Suspension: Air suspension Axle configuration: Number of axles: 2 Lift axle: Yes, axle 1 Steering axle: Yes, axle 2, mechanically steered (Tridec) Axle make: BPW, with disc brakes Psdpfx Aqjziudyelopw Tire size: 385-55-22.5 Rear axle 1: Tread depth left: 80%, tread depth right: 80%, Michelin Rear axle 2: Tread depth left: 80%, tread depth right: 80%, Michelin Extras: Fully galvanized chassis, fully insulated cargo box, Carrier Vector 1550 refrigeration unit (diesel and electric), temperature range from -30 to +30 degrees, suitable for transporting flowers, 270 cm internal height, 4 x rails against the ceiling, 1 x horizontal securing rail, 1 x lift axle, mechanically steered 2nd axle (Tridec), Dynamic Ramp Protection, various additional lights. VERY WELL-MAINTAINED CHILLED/FREEZER SEMI-TRAILER WITH STEERING AXLE AND GOOD DIMENSIONS. HAS ONLY DRIVEN 45,000 KM, AND THE REFRIGERATION UNIT HAS ONLY RUN FOR 26 HOURS. IMMEDIATELY AVAILABLE AND READY FOR USE. Further information: * Tire size | First axle: 385/55 R22.5 * Tire tread depth inside left | First axle: 80% * Tire tread depth inside right | First axle: 80% * Maximum axle load | First axle: 9000 kg * Tire size | Second axle: 385/55 R22.5 * Tire tread depth inside left | Second axle: 80% * Tire tread depth inside right | Second axle: 80% * Maximum axle load | Second axle: 9000 kg * Position | First axle: Rear * Lift axle | First axle: Yes * Position | Second axle: Rear Further equipment: * Rear doors * Homepage * Steering axle * Lift axle * SemCollection * SemStars Semtrade B.V. Contact: Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs: Please inquire in advance about the costs and procedures for your country. Location: Maasdijk (NL) | 140 km from the border | 20 km from Rotterdam The Hague Airport Disclaimer: Subject to changes, prior sale, and errors.

Condition: used, mileage: 363,677 km, power: 96 kW (130.52 HP), first registration: 02/2015, fuel type: diesel, empty load weight: 1,895 kg, maximum load weight: 1,530 kg, overall weight: 3,500 kg, axle configuration: 2 axles, wheelbase: 3,450 mm, gearing type: mechanical, emission class: euro5, suspension: steel, total length: 2,100 mm, total width: 2,270 mm, total height: 5,740 mm, maximum speed: 155 km/h, Equipment: ABS, air conditioning, central locking, navigation system, truck registration, FIAT Ducato 250 flatbed | 3 seats | air conditioning | multifunction steering wheel, radio | Bluetooth | 130 hp | Austrian vehicle | Loading dimensions: L: 3.25m, W: 2.05m, sideboard height: 40cm | toolbox | Subject to errors, input mistakes, and prior sale Ppjdpfx Aqjyxghrolow

Condition: new, functionality: fully functional, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE FABO MCC-200 is small efficient model of CC series, those are a mobile type & closed circuit crushing and screening plants that is used for processing of hard materials such as basalt, granite, gabbro, dolomite and other types of hard stones. TECHNICAL SPECIFICATIONS: -Bunker: 15m3 -Production Capacity: 150-250 Tons Per Hour -Crusher Type: Cone Crusher -Maximum Feeding Size: 180mm -Vibrating Screen Size and Deck: 1700x4500mm 3-4 decks -Total Motor Power: 197 kW MCC-200 is a combination of: • Bunker(Hopper) • Vibrating Feeder • Cone Crusher • High Stroke Type Vibrating Screen • Folding type feeding, feedback, bypass and stock conveyor belts • Hydraulic feet • Mobile Chassis with axles and tires Ppodpezkahysfx Aqlow • Fully Automation System • Dust Suppression System • Easy walking platforms for maintenance Diesel Generator (Optional) FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, functionality: fully functional, color: other, overall weight: 42,000 kg, Year of construction: 2026, FTC-300 Tracked Cone Crusher is produced in the form of feeding bunker, generator, cone crusher and stock belt, respectively.FTC-300 Tracked Cone Crusher, which is moved with a remote control, successfully completes all the commands given by the user by moving on its tracks in all harsh climatic conditions and rough terrain. FTC-300 Crawler Cone Crusher, which is delicately designed and carefully manufactured for crushing stone, is the leading tracked crusher plant in the sector with its 42,000 kg weight and 150-250 T/H crushing capacity per hour. The Vibrating Feeder Bunker has been developed by our engineers in a user-oriented manner so that the crusher, on which it is positioned on FABO vibrating feeding hoppers, works with high efficiency. Vibration speed of FABO vibrating feeding bunkers can be adjusted manually with the automation system.This feature prevents the bunker from wearing out and provides the user with a longer and more efficient use. Cone Crusher Cone crushers are the crusher of the FTC-300 tracked crushing plant that can easily crush hard stones. The power transferred from the engine to the gear shaft is sent to the hub with gears. The crusher crushes the stones to pieces thanks to the core and concave inside. Standing out with its robustness and production capacity, the cone crusher ensures that the FTC-300 tracked crushing plant operates at maximum capacity thanks to its high rotor speed and robust gear structure. Stock Belts With its foldable structure, it minimizes the dimensions of the machine it is on. Optionally, the number and length of belts can be increased upon the request of the user. 10 mm EP 125 4-ply band rubbers moving on 4mm st 37 twisted sheet perfectly transport the aggregate coming out of the screen to the area desired by the user in the most efficient way.The belt tires, which are produced resistant to wear, will never let you down and offer many years of service life. Pedpfx Ajziba Usqlopw FTC-300 tracked crushing plant is controlled by a full automation system.Thanks to the automation system panel on the machine, the working mode of the machine can be adjusted.The operating principle of the machine can be easily adjusted according to the type of the material loaded by the user into the vibrating hopper.Many features such as crusher rotor speed, (Optional) bunker vibration speed can be adjusted with the automation system.

Condition: new, Year of construction: 2026, functionality: fully functional, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Cone crusher product group is designed especially for the hardest material, cone crushers are one of the best choices for crushing river gravel, basalt and granite, along with abrasive materials in the mining industry. The working principle of cone crushers is to break the material by compression, by squeezing it between its walls, which are completely covered with resistant mantle and a bowl liner. It has longer life than other crushers thanks to its long life wear parts. Model: FABO CC200 Capacity: 200-250 t/h Max. Feed opening: EC 185 mm C 145 mm MC 115 mm M 90 mm MF 75 mm F 50 mm EF 35 mm Motor: 132 kW Ppedpfxszl Ntbj Aqljw Head diameter: 1100 mm Dimensions (width * height): 2520* 2540 mm Countershaft Speed-rpm: 750-1200 Weight: 11230 kg * Hydroset Control * Automatic Load Protection * Practical discharge * High capacity cubic production * High-performance contactless labyrinth * High productivity, low energy production and lower wear costs, long service life and high product yield with desired fine powders. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, functionality: fully functional, fuel type: hybrid, color: other, overall weight: 40,000 kg, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Fabo tracked jaw crusher FTJ 11-60 is a complete mobile system which moves on hydraulically driven tracked system with 1 km/h speeds and combination of a vibrating grizzly feeder, 1000 x 600 mm jaw crusher, foldable stockpile conveyors, control unit and electric generator. In today's conditions and technological processes, businesses are beginning to think about how to make their field of activity more efficient. As they make it more efficient, they always take into consideration factors such as the operationally of the machines they use, their low cost and staffing needs. Our Tracked Crushers can crush with high performance even on the most demanding mine sites with its specially designed body and compact structure. Customization can be done to our tracked systems by Jaw Crusher, Primary and Secondary Impact or Cone Crusher. All necessary equipment for the process is combined only single chassis and processing equipment is driven by electrical motors. Overall production capacity is 100-250 tph. Advantages of Tracked Crushers; -Heavy-duty walking tracks can reach places where ordinary machines cannot reach. -It has the appropriate dimensions and sound level to crush construction waste in the city. -The fuel consumption of the generator and walking track units are very economical. -System maintenance and management is very easy with latest technology control software. TECHNICAL SPECIFICATIONS: -Model: FTJ 11-60 -Production Capacity: 100 – 250 tons per hour -Maximum Feeding: 550 mm Ppjdpfx Aqszibghjlew -Crusher Type: Jaw Crusher -SIZE: 1000x600 mm -Generator: 275 kva -CSS Setting: 40 – 150 mm -Weight: 40 tons – Low investment and operation cost – Zero substructure preparation – Easiness at usage and maintenance – Easy assembly and disassembly advantages. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: excellent (used), CTS CW-60/5.5 – Water-cooled Climate Test Chamber The CW-60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in and drive-in climatic chamber designed for simultaneous temperature and humidity testing on multiple test specimens. Device Description The climate test chamber allows for functionality or material property testing of a test item under the influence of temperature and humidity. Efficient air circulation with a correspondingly high level of recirculating air volume ensures excellent transfer to the test item. The air treatment compartment is located at the rear of the test chamber. The aggregates are positioned behind the unit in a separate frame for easy access. The control system is integrated into a separate control cabinet. The control panel is mounted in the door of the control cabinet. For dehumidification, the test chamber is equipped with a self-regenerating compressed air dryer. The test chamber can also be purged with fresh air via an internal blower. Technical Specifications: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate, linear with specimen and heat radiation, measured in supply air: - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% rH - Dew point range: +5 °C to +89 °C - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 – ±3% rH over time Technical data refer to an ambient temperature of +25 °C, nominal voltage 400 V, without test item, without external radiation and without additional devices. Dimensions: Podpezizmusfx Aqlopw Internal dimensions (test space/usable volume): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height: 2,300 mm, Width: 1,600 mm, Depth: 1,550 mm External dimensions: Height: 2,800 mm, Width: 2,250 mm, Depth: 5,000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Nominal power: 58.3 kW (incl. 5 sockets) - Nominal current: 86.0 A - Protection rating: IP 54 Technical Execution: Refrigeration unit: Water-cooled, low noise, semi-hermetic, infinitely variable capacity adjustment via electronic monitoring and control system, environmentally friendly refrigerants R 23 / R 404 A Notes: Inspection by appointment possible (46325 Borken) Shipping by forwarding agent possible – Costs & organization upon request Scope of delivery: (see photo) (Subject to change and possible errors in the technical data; information provided without liability!) For further questions, we are happy to assist you via telephone.

Condition: excellent (used), CTS CW‑60/5.5 – Water-Cooled Climate Test Chamber The CW‑60/5.5 from CTS GmbH (Climatic Test Systems) is a mid-sized, walk-in or drive-in climate chamber designed for conducting temperature and humidity tests on multiple test specimens simultaneously. Equipment Description This climate test chamber allows you to assess the function or material properties of test objects under controlled temperature and humidity conditions. Efficient air circulation with a high re-circulation rate ensures excellent transfer to the test goods. The air handling system is located at the rear of the inner chamber. All of the aggregates are mounted in a separate frame behind the unit, providing easy access. The control system is housed in a separate switch cabinet, while the user interface is integrated into the cabinet door. To dehumidify the test chamber, it is equipped with a self-regenerating compressed air dryer. Fresh air can be supplied by a blower to purge the chamber as required. Podpfxjzizmno Aqlepw Technical Specifications: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate (linear with test specimen and radiant heat, measured at supply air): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity (dew point range +5°C to +89 °C) - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 to ±3 % r.h. over time Technical data based on ambient temperature of +25 °C, rated voltage 400 V, without test specimen, without radiant heat, and without additional equipment. Dimensions: Internal dimensions (test/useable space): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height 2300 mm, Width 1600 mm, Depth 1550 mm External dimensions: - Height 2800 mm, Width 2250 mm, Depth 5000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (incl. 5 sockets) - Rated current: 86.0 A - Protection category: IP 54 Technical Design: - Refrigeration unit: water-cooled, low-noise, semi-hermetic, stepless power adjustment via electronic monitoring and control system - Environmentally friendly refrigerants: R 23 / R 404 A Notes: - Inspection possible by appointment (46325 Borken) - Shipping by freight forwarding possible – costs & organization on request - Scope of delivery: (see picture) - (Subject to modifications and errors in technical data, all information provided without guarantee!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), CTS CW‑60/5.5 – Water-Cooled Climate Test Chamber The CW‑60/5.5 from CTS GmbH (Climatic Test Systems) is a mid-sized, walk-in or drive-in climate chamber designed for conducting temperature and humidity tests on multiple test specimens simultaneously. Equipment Description This climate test chamber allows you to assess the function or material properties of test objects under controlled temperature and humidity conditions. Efficient air circulation with a high re-circulation rate ensures excellent transfer to the test goods. The air handling system is located at the rear of the inner chamber. All of the aggregates are mounted in a separate frame behind the unit, providing easy access. The control system is housed in a separate switch cabinet, while the user interface is integrated into the cabinet door. To dehumidify the test chamber, it is equipped with a self-regenerating compressed air dryer. Fresh air can be supplied by a blower to purge the chamber as required. Technical Specifications: Temperature Testing: - Temperature range: -60 °C to +100 °C - Temperature deviation: ±0.5 to 1 K over time - Temperature change rate (linear with test specimen and radiant heat, measured at supply air): - Heating: 2 K/min from -40 °C to +85 °C - Cooling: 2 K/min from +85 °C to -40 °C Climatic Testing: - Temperature range: +10 °C to +90 °C - Humidity range: 10% to 95% relative humidity (dew point range +5°C to +89 °C) - Temperature deviation: ±0.5 K over time - Humidity deviation: ±1 to ±3 % r.h. over time Technical data based on ambient temperature of +25 °C, rated voltage 400 V, without test specimen, without radiant heat, and without additional equipment. Dimensions: Internal dimensions (test/useable space): - Volume: approx. 5,500 liters (5.5 m³) - Internal dimensions (approx.): Height 2300 mm, Width 1600 mm, Depth 1550 mm External dimensions: - Height 2800 mm, Width 2250 mm, Depth 5000 mm Operating Data: - Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz - Rated power: 58.3 kW (incl. 5 sockets) - Rated current: 86.0 A - Protection category: IP 54 Technical Design: - Refrigeration unit: water-cooled, low-noise, semi-hermetic, stepless power adjustment via electronic monitoring and control system Psdpfx Ajzizmboqljpw - Environmentally friendly refrigerants: R 23 / R 404 A Notes: - Inspection possible by appointment (46325 Borken) - Shipping by freight forwarding possible – costs & organization on request - Scope of delivery: (see picture) - (Subject to modifications and errors in technical data, all information provided without guarantee!) For further questions, we are happy to assist you by phone.

Condition: used, Year of construction: 2016, machine/vehicle number: 200-0052, overall weight: 26,000 kg, This ZEULENRODAER PRESSTECHNIK double-column press, type PYZ 250 F, is being auctioned online as part of our industrial auction/machine auction due to the closure of the J&S GmbH Automotive Technology – Presses and Metalworking location. You can find this and many other items on our platform. Further machine data: Zeulenrodaer Presstechnik, type: PYZ 250 F, year of manufacture: 2016, machine number: 200-0052, rated pressing force: 2500 kN, last service: 10/2025, machine in operation until 12/2025. Technical data of the press according to the nameplate: Rated force: 2,500 kN Hydraulic pressure: 180 bar Permissible follow-up time: 97 ms Rated voltage: 400 V Pjdezk H Uaepfx Aqlopw Frequency: 50 Hz Connected load: 100 kW Safety distance: 194 mm Machine weight: 26,000 kg Function and technical data are unverified Without further items/without additional accessories, unless explicitly stated as part of the item. WE STRONGLY RECOMMEND ATTENDING THE INSPECTION! Subject to change This lot is being auctioned subject to change. After the auction closes, the seller will notify within 2 weeks whether the highest bid is accepted or not. We will inform you promptly.

Condition: like new (used), Year of construction: 2014, functionality: fully functional, total length: 2,610 mm, total width: 1,100 mm, total height: 1,030 mm, WILK MAREL – a machine for grinding fresh and frozen products. The machine can be used as a stand-alone unit or as part of an integrated production line. Power: 45 kW Voltage: 3x400V – 50 Hz or as required Control voltage: 24 V DC Material: AISI 304 stainless steel Auger: stainless steel Ppjdpfxjzlgvge Aqljw Hopper capacity: 300 l Cutting blade: ø250 mm

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 2,886 h, load capacity: 5,000 kg, lifting height: 5,500 mm, free lift: 1,930 mm, fuel type: diesel, mast type: triplex, construction height: 2,790 mm, power: 55 kW (74.78 HP), fork length: 1,200 mm, drive type: Diesel, Diesel forklift Load center: 500 Mast type: Triplex Transmission: Torque converter Condition: Ready for use and fully operational Psdpfx Aqjzlvfdelepw Technical condition: Very good Front tire type: Superelastic Rear tire type: Superelastic Description: Sideshift, fork positioner, 3rd valve, 4th valve, front work lights, heater, full cabin, full free lift, CE certificate, safety light, LED,

Condition: good (used), Year of construction: 2008, Ref. -No.: 10657 Manufacturer: EMAG Type: EMAG VTC 250 Year of construction: 2008 Type of control: CNC Control: Siemens Sinumerik 840D Storage location: Hakberstadt Country of origin: Germany Turning Length: 630 mm Tool Taper: VDI 40 Turret places: 1 Pcs Number of tool stations: 12 pc Turning Speeds: 5000 RPM Chuck diameter: 250 mm Ppedpfxozkthge Aqlsw Further information: - The machine features an overhead drive spindle with a tailstock at the bottom. - Coolant tank, approx. 1,000 L, including - a paper filter roll. - Clamping devices: Hainbuch clamping top, including various centering tips - Gripping devices on the turrets for feeding and removing raw and finished parts during magazine operation. - Magazine loading - Vertical pick-up lathe, which can generally be easily upgraded for automatic loading and unloading. The machine can be viewed while powered on by prior arrangement.

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, pressing force: 90 t, bale weight: 700 kg, type of input current: three-phase, total width: 220 mm, total height: 240 mm, overall weight: 23,000 kg, total length: 1,142 mm, filling opening width: 90 mm, filling opening length: 140 mm, bale width: 80 mm, bale length: 1,200 mm, bale height: 110 mm, tank capacity: 1,100 l, year of last overhaul: 2025, Equipment: documentation/manual, Paal Licon 250 SC Channel Baler Ppedjxdnn Iopfx Aqlsw Originally built for baling non-ferrous scrap, for the last 12 years this machine has been used at a packaging plant. It processed 700–800 tonnes of cardboard per month. Machine specifications: - Length: 11.42 m - Width: 2.20 m - Pressing force: 80 t - Bale/channel dimensions: 110 x 80 cm - Feed opening: 140 x 90 cm - Machine weight: 23 t - Dual high-efficiency cooling system designed for continuous 24-hour operation in a warm workshop environment The machine floor has been overhauled; the main ram/cylinder is just six months old. The knives for trimming excess material have been replaced and upgraded for faster and more efficient operation. In 2025, the hydraulic oil was changed, distribution valves serviced, and all rollers of the main plunger/plate replaced. The pressing ram has also been refurbished. Comes with plenty of spare parts. Equipped with upgraded electronics and control panel from 2018, fully operational and ready for immediate use. Operation via touchscreen display. Comprehensive photographic documentation from the dismantling process is available. Complete technical documentation (DTR) in Polish and electrical schematics included. Testing of the machine is possible on-site. Additionally available: - Roller bale discharge system with conveyors, tipper, weighing system, and bale storage (as shown in the photos), Or optionally: - Tipping elevator for emptying 1100 L or 660 L bins - PAAL KES1750 chain channel conveyor: width 1750 mm, horizontal section 8 m, inclined section 8 m.

Condition: good (used), Year of construction: 2005, functionality: fully functional, Equipment: documentation/manual, BOEHRINGER NV 250 CNC vertical turning lathe For sale is a BOEHRINGER NV 250 CNC vertical turning lathe, manufactured in 2005. The machine is ideally suited for automated series production of turned parts. The pick-up spindle and the existing workpiece feeder enable automatic loading and unloading. Technical data: Manufacturer: BOEHRINGER Type: NV 250 Year of manufacture: 2005 Spindle head: A6 Max. chuck diameter: 250 / 315 mm Spindle bore: 65 mm X-axis: 760 mm Z-axis: 260 mm Y-axis optional: ±50 mm Max. spindle speed: 5,000 rpm Spindle power: 31 kW Max. torque: 350 Nm C-axis: available 12-position tool turret Tool holder: VDI 40 / DIN 69880 Rapid traverse X/Z: 120 / 40 m/min Machine weight: approx. 8,500 kg Connection: 400 V / 50 Hz / 3 AC Equipment: Pick-up spindle Automatic workpiece feeder C-axis 12-position turret VDI 40 tool holder Chip conveyor Coolant system UNIFIL extraction system / filter system Documentation available Podpezkk Udsfx Aqlepw Condition: Used Machine complete Inspection under power possible by arrangement

Condition: good (used), Year of construction: 1995, Offer 25346 Technical data: - Load capacity: 250 kg - Chuck jaw diameter: 250 mm - Motorized rotation, left and right - Rotation speed infinitely adjustable - Height from center of chuck: approx. 900 mm - Electric foot switch - 3-jaw chuck: 250 mm - Mobile base - Space requirement: approx. W 800 x H 1200 x D 1400 mm - Weight: approx. 350 kg Ppodszkhr Hjpfx Aqljw

Condition: used, Year of construction: 1965, honing diameter 80 mm stroke 280 mm throat 300 mm total power requirement 6 kW weight of the machine ca. 2,6 t Honing Ø 10 - 100 mm Max. honing depth, approx. 250 mm Max. spindle stroke 260 mm Distance between spindle and column 300 mm Mounting height 1,000 mm Table size 350 x 500 mm Pjdot Hwupspfx Aqljpw Height of table above floor 500 mm Spindle speeds in 2 steps, infinitely variable, approx. 85 - 300 rpm 170 - 600 rpm Stroke speed, infinitely variable, hydraulic 0 - 23 m/min Spindle drive 2 kW Total electrical load 6 kW - 380 V - 50 Hz Weight 2,600 kg Accessories / Special Features * Built-on 2-station tilting table which accommodates 2 workpieces. Mechanical workpiece clamping, using a manual lever. * Hydraulic infeed of the tool. * Switch-off via timer. * Air measuring device (probably). * Honing oil unit. * Various splash shields, etc. Condition : Good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We have a selection of honing machines available. Please let us know what you need.

Condition: used, Year of construction: 2004, turning diameter 250 mm Podpfx Ajt Hxa Tjqlspw turning length 100 mm control SIEMENS 840 D total power requirement 35 kW weight of the machine ca. 7500 kg dimensions of the machine ca. m E M A G (Germany) Vertical CNC Controlled Hard Turning and Grinding machine with tool turret and workpiece handling System Model VSC 250 DS Year 2004 # M7 28.69324 _____ Turning Ø, max. 250 mm Turning length internal / external 100 mm Workpiece length min./max. 29 – 100 mm 6-positon tool turret Ø / swing-Ø 480/790 mm Workpiece spindle Slide travel, X / Z / stroke 680 / 400 / 200 mm Feed rate / Quick feed X/Z 45/30 m/min. Feed force X/Z 5,5/11 kN Spindle speed 4.300 / 6.000 rpm Spindle drive 28 kW Total electrical load, approx. 35 kW - 400 V - 50 Hz Weight, approx. 7,500 kg Accessories / Special Features: * CNC – Continuous Path Control SIEMENS Model 840 D, with colour monitor, graphics, menu-supervised dialogue programming, and all the usual options, cycles and subprograms, etc. * Hexagon Tool turret head with 6 tool positions (Ø 40 mm) without motorized tools posts, two positions T 3 u. T 6 equipped with grinding spindles with 42.000 rpm and with 18.000 rpm, using CBN discs resp. regular grinding tools * Workpiece handling device with WP transportation frames and circulation system and pick-up and unloading of finished parts directly through the motor spindle which is equipped with a hydraulic 3 jaws chuck make SMW Autobloc with membrane clamping and clamping control system. * MARPOSS MIDA Measuring Probe for measuring blank parts a. the finished parts * NORGREN air measuring system, hydraulic weight compensation of spindle, * Main elements of machine are temperature stabilized by a coolant system made by HYFRA * Recooler for the grinding coolant sitting on a large Coolant device consisting of SEITZ Paper Band filter and a mobile Chipconveyor, Magnetic separator, Centrallubrication, etc. Vertical CNC lathes offer a thermo-resistant construction (chips do not fall onto the machine bed),fast workpiece change times (pick-up system through the main spindle) and a ridged tool arrangement,which also allows unrelated machining work, like hard turning or grinding process on the same machine. Condition : Good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: used, Year of construction: 1996, core drilling diameter max. 25 mm bore depth 1000 mm swing diameter mm total power requirement 25 kW weight of the machine ca. 12,5 t dimensions of the machine ca. m T B T (Germany) CNC-Controlled Horizontal Deep Hole Drilling " Centre " Model BWP 250 Year 1996, but reconditioned mechanically and electrically in 2006 _____ Working range: X Axis, machine column cross 2,000 mm Z Axis, drilling slide horizontal 1,200 mm Drilling depth 1.000 mm Y Axis, drilling slide vertical 1,100 mm Table clamping area 1,200 x 2,000 mm Drilling capacity in solid material, approx. 4 - 25 mm Tool holder taper HSK 50 Spindle speeds 1.260 - 15,000 rpm Feed rates / quickfeed, XYZ, infinitely variable 100 - 10,000/15.000 mm/min. Force rate of feed motors 27 Nm / 1.000 daN Spindle drive steplessly adjustable 7 kW Total electrical load, approx. 30 kW - 400 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features: " Ideal machine for the complete processing of large workpieces like tool a. dies (cooling holes) mould- and dieplates, hydraulicparts etc. by means of deep hole drilling up to 25 x 1.000 mm, face milling up to Ø 60 mm, spiral twist drilling, counterboring and threading up to M 24 x 3 mm. " SIEMENS Continuous Path Control in 4 axes Model 840 D, with process monitoring for coolant pressure, operation data control function, toollife, feed force,Error diagnostics and easy dialogueprogramming directly on the panel, etc. " High Frequency Spindle Make GAMFIOR with stepless speeds " Hydraulically movable drill bush carrier, swivels 90° for holding gun drills (ELB) or picking up regular tools from the tool changer like twist drills, milling tools, taps, etc. " With automatic tool changer made by MIKSCH, Model CTM 40, using a 12-position tool changer, which is mounted on the r.h.side of machine housing, in fixed position, only moving forward and backward for tool changing operation. " Built-on indexing table as B-Axis made by FIBRO Model RTN 400 = 420 x 420 mm, " Extra Rotary Table made by FIBRO with Ø 1.000mm, for indexing 3-144 positions " Built-in coolant device with chip conveyor and various filters. " 2 steady rests. " Completely covered working area with access at the front and at the side. Ppedpfot Hw Aysx Aqlew Condition : Very good condition. This is a rare and valuable machine. Under Power Delivery : immediately ex our Stock Payment : Net, after conclusion of contract.

Condition: excellent (used), Control SIEMENS 840D Ppsdpjyrhl Rofx Aqlsw