Used Helium Leak Tester for sale (716)

Condition: used, mileage: 623,000 km, first registration: 05/1971, fuel type: diesel, axle configuration: 2 axles, color: grey, gearing type: mechanical, Year of construction: 1971, Equipment: ABS, electronic stability program (ESP), SCANIA 110 SUPER WITH TURBOCHARGER THREE-WAY TIPPER TRUCK 2 UNITS AVAILABLE --- VEHICLE HISTORY: * ENGINE IS DRY AND DOES NOT LEAK OIL VEHICLE EQUIPMENT: * THREE-WAY TIPPER * MANUAL TRANSMISSION * ENGINE BRAKE * TURBOCHARGER Gjderyrk Ropfx Ahvjuc * PTO (POWER TAKE-OFF) * PERMISSIBLE GROSS WEIGHT: 18,000 KG * CURB WEIGHT: * PAYLOAD: * IMMEDIATELY READY FOR USE --- * EXPORT SALES ONLY WITH DEPOSIT (MIN. €500 - €2,000) --- EXPORT DECLARATION CUSTOMS EXW IN 10 MIN. (APPROVED EXPORTER) 5 DAY, 15 DAY, 30 DAY PLATES AND 15 DAY AUSTRIAN PLATES AVAILABLE EURO 1 TECHNICAL DATA SHEET (DATA TECNICI) VEHICLE RESERVATIONS ONLY VIA EMAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID For sales to the EU & third countries, a deposit of at least €500 / €1,000 will be charged. Subject to alterations, errors and prior sale! More vehicles available on our website. Sales exclusively according to our General Terms & Conditions – see homepage. Important note: Despite careful verification of all details in our offer, errors may occur. Some may be caused by data transmission errors from various platform providers. Therefore, we point out all information is provided without guarantee and does not constitute a legal claim. Legal notice: This sales advertisement does not constitute an offer within the meaning of §145 BGB, but rather serves as information for the initiation of a contract. All information provided is without guarantee and does not constitute warranted characteristics.

Condition: used, mileage: 625,000 km, first registration: 05/1971, fuel type: diesel, axle configuration: 2 axles, color: grey, gearing type: mechanical, Year of construction: 1971, Equipment: ABS, electronic stability program (ESP), SCANIA 110 SUPER WITH TURBOCHARGER THREE-WAY TIPPER – 2 UNITS AVAILABLE --- VEHICLE HISTORY: * Engine is dry and does not leak oil VEHICLE EQUIPMENT: * Three-way tipper * Manual transmission * Engine brake * Turbocharger * PTO (power take-off) * Permissible total weight: 18,000 kg * Curb weight: * Payload: * Immediately operational --- * Export sales only with deposit (minimum €500 – €2,000) --- Export declaration/customs EXW possible within 10 minutes (authorized exporter) 5-day, 15-day, 30-day license plates and 15-day Austrian license plates available EURO 1 Technical data sheet (Dati Tecnici) Vehicle reservation requests exclusively via the email function Verbal reservations are not valid For sales to EU and non-EU countries, a deposit of at least €500 / €1,000 will be charged. Subject to change, errors, and prior sale! More vehicles can be found on our website. Sales are made exclusively according to our terms and conditions – see homepage. Important Note – Important Information: Despite careful inspection of all details in our offering, errors may occur. These may partially result from transmission errors in the systems of various platform providers. Therefore, please note that all information is provided without guarantee and does not constitute a legal claim. Gjdpfotp Sabsx Ahvjuc Legal notice: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it is for information purposes for contract initiation. The specifications provided here are without guarantee and do not constitute warranted characteristics.

Condition: used, Year of construction: 2017, operating hours: 8,340 h, Beautiful machine - Well equipped - No play in the joints Godeyqn Hlepfx Ahvouc - No oil leaks! VIN: VATZ1265CZB044737 Year of manufacture: 2017 Original operating hours: 8,350 hours Liebherr dealer maintained Special factory paint RAL 1027 curry yellow 4-cylinder inline engine, water-cooled with turbocharging, 103 hp Hydrostatic travel drive with 2 speed ranges – max. 32 km/h * Standard Z-bar linkage * Ride control / boom suspension * Hydraulic quick coupler with installation kit * Liebherr factory-installed central lubrication system * 3rd hydraulic control circuit for high-tip / grab bucket / or 4-in-1 bucket * Steel lamp brackets instead of plastic * Rear tow hitch * "Comfort" suspended driver’s seat * Comfort radio * 2 LED work lights at rear of cab roof * 2 LED work lights at front of cab roof * Adjustable steering column * Rotating beacon / warning strobe on the center of the cab roof * Crane / lashing eyes at rear and front frame * Fire extinguisher * Road approval 32 km/h Tires 17.5 x 25 L3, front axle: 2 tires, 95% tread, like new!! Tires 17.5 x 25 L3, rear axle: 2 tires, 95% tread, like new!!! Permissible total weight approx. 10,500 kg Operating weight approx. 8,500 kg Offer includes quick coupler and 1.6 cbm standard bucket – Price: €46,900 net (export), plus 19% VAT for domestic sales Optional attachments at additional cost: · Folding bucket 2 cubic meters from €3,550 · High-tip bucket · Screening / mixing bucket, manufacturer "Wolf" · 5-ton pallet fork from €2,190 Prices net plus VAT or for export Sale only to businesses or for export. Sale in as-is condition. No guarantee or warranty. The indicated operating hours or kilometer readings are taken from the hour or odometer counter; we do not guarantee their accuracy! Subject to prior sale. The vehicle description does not represent a binding offer and the details provided should not be regarded as warranted characteristics. The description and information serve only for general identification of the vehicle and do not constitute a legal warranty. Information is not guaranteed to be complete. Any details/descriptions and images are non-binding and do not represent assured properties. Only the stipulations in the order confirmation and invoice are binding. The seller assumes no liability or warranty. The advertisement may contain typing or data transmission errors. The seller has not inspected the machine. Equipment needs to be checked separately if necessary. We gladly accept your vehicle as a trade-in. For further questions, please contact us. For our international customers, we can prepare all customs and export documents for smooth transfer abroad.

Condition: used, mileage: 650 km, power: 110 kW (149.56 HP), first registration: 11/2024, overall weight: 5,600 kg, fuel type: diesel, color: orange, gearing type: mechanical, emission class: euro6, total width: 1,710 mm, total height: 2,200 mm, number of seats: 2, Equipment: ABS, air conditioning, all wheel drive, soot filter, Multicar M31 C Skip Loader 3L Turbo Diesel 110kW / 150hp Iveco Engine Euro 6 Green * Selectable all-wheel drive * 5-speed manual transmission with reduction gear * Wheelbase: 2450mm (short) Gjdomi Rxkepfx Ahveuc * 4-channel ABS, 4-wheel ventilated disc brakes * Mobile hydraulics 03-03 for 2 driven implements * Rear hydraulics * Swivel function, 2 front * Leak oil line at front * Trailer tipper hydraulics * Front attachment quick-change system SWV 500 * Attachment kit for control panel * Ball-head trailer coupling * Repeater headlights with work lights * Rear LED work lights * Driver’s suspension seat * Radio with Bluetooth * Power windows * Electrically adjustable, heated mirrors * Tires: 285/65 R16C M&S * Reinforced rear axle * Reinforced front axle * Area clearing function * Road-speed dependent spreading * Air conditioning * Skip loader body Konar type BK25S (new) * Telescopic arms * Ropes for high-level unloading * Hydraulic catch hook * Chains with safety latch hooks and chain shorteners * New containers in stock * New TÜV/emissions test, new inspection/service, workshop-tested * 12 months warranty Optional Winter Package: - Leasing / financing / vehicle rental / trade-in / delivery available. Further attachments in various versions, new and used, in stock. More vehicles from Fuso Canter and Multicar, as well as various attachment and mounted devices, can be found at: - Subject to errors and prior sale. - Our general terms and conditions apply.

Condition: used, mileage: 5,400 km, power: 110 kW (149.56 HP), first registration: 07/2021, overall weight: 5,600 kg, fuel type: diesel, color: orange, gearing type: mechanical, emission class: euro6, total width: 1,710 mm, total height: 2,200 mm, number of seats: 2, Equipment: ABS, air conditioning, all wheel drive, soot filter, Multicar M31 C with Winter Package 3L Turbo Diesel 110kW / 150 HP Iveco Engine Euro 6 Green * Selectable all-wheel drive * 610 operating hours, 5400 km * 5-speed manual transmission with reduction gear * Right-hand drive * Wheelbase: 2450mm (short) * 4-channel ABS, 4-wheel internally ventilated disc brakes * High-pressure comfort hydraulics * Rear hydraulics * 2-way front swivel * Front leak oil line * Trailer tipping hydraulics * SWV 500 front attachment quick-change system * Attachment control console kit * Ball head trailer hitch * Repeater headlights with work light * Rear LED work light * Driver’s air suspension seat * Bluetooth radio * Power windows * Electrically adjustable, heated mirrors * Tires 285/65 R16C M&S * Reinforced rear axle * Reinforced front axle * Area clearing function * Road-speed-dependent spreading system * Air conditioning * 3-way tipper body with front wall extension * New TÜV/emissions test, new inspection/service, workshop-tested * 12 months warranty 12-month warranty on the base vehicle. Winter Package: Bucher Varioplow 2m, brine tank spreader Husky V13, year of manufacture 2021 - Leasing / financing / vehicle rental / trade-in / delivery possible. Additional attachments in various designs, new and used, in stock. Godpfx Ahey N Hvdevouc You can find more vehicles from Fuso Canter and Multicar as well as various bodies and attachments at: -Subject to errors and prior sale. -Our terms and conditions apply.

Condition: new, power: 129 kW (175.39 HP), overall weight: 8,550 kg, color: orange, gearing type: automatic, number of seats: 3, total width: 1,995 mm, total height: 2,195 mm, Year of construction: 2026, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Fuso Canter 9C18 Roll-off Tipper Available immediately, new generation * 3L turbo diesel engine, 129 kW / 175 HP, EURO 6 * Start / stop automatic * Automatic transmission * Wheelbase 3,400 mm * Rear axle with twin tyres and differential lock * Traction tires 205/75 R16C * Four-wheel disc brakes * Electronic Stability Program (ESP) * ABS with electronic brake-force distribution * Ball-head trailer coupling 3 years warranty on the base vehicle from the date of first registration or up to 100,000 km. Comfort cab with the following features: * Electric windows * Heated mirrors * Central locking with remote control * Immobilizer * Adjustable steering wheel and column * Airbag * Multifunction steering wheel * 7" touchscreen radio with Apple CarPlay and reversing camera * Digital tachograph * EU control device * Overhead storage above windscreen & behind seats * Double passenger seat bench * Driver’s suspension seat with armrest * Lockable glove compartment * LED headlights * Fog lights with automatic daytime running lights * Tilting cab * Lane departure warning * Brake assist * Hill start assist * Turn assist * Automatic climate control * AdBlue tank cover * Reversing warning system * Cruise control Roll-off system I-KING Type HZ.6: Body for city containers as per DIN 30722 Part 3 * 90 mm hook height * Control panel in driver’s cab * Radio remote control * Push-arm system (container length from 2,800 mm to 4,000 mm) * Low loading angle * Hydraulic container locking * Push and tip force: 6,000 kg * Mechanical hook safety * Load-holding valves on all hydraulic cylinders * Emergency stop function * CE-certified construction * Driven by vehicle hydraulics Matching containers in stock. Additional equipment: Guodpfx Aow Nl D Sohvoc * Traction tires * Additional dimmable headlights with integrated indicators for front mounting devices * LED work lights at rear * Red-white warning markings * Engine-driven dual-circuit universal hydraulic system * 2 double-acting control circuits at the front (up/down, right/left, float position) and 1 working circuit at rear, front leak oil line * Hydraulic front lifting system with quick-change plate (Multicar system) Including Fiedler spring flap plough FRS 2620, blade width at maximum angle 2.30 m, 2-cylinder version, kerb deflector, support rollers, LED plough lighting, warning flags, safety valve kit for 2-cylinder version * Fiedler hopper spreader FSS 2000, capacity 2 m³, control panel in the driver’s cab, road-speed-dependent spreading, rear lighting, permanently mounted on roll-off frame. For more Fuso Canter and Multicar vehicles as well as various container sizes, visit: Leasing / Financing / Trade-in ALL ACCESSORY DETAILS WITHOUT GUARANTEE, subject to prior sale, change, and errors. Our general terms and conditions apply. Other cab versions, wheelbases, bodies, and hydraulic systems for plough and spreader available from stock or short delivery times. Please inquire! Leasing / Financing / Trade-in ALL ACCESSORY DETAILS WITHOUT GUARANTEE, subject to prior sale, change, and errors. Our general terms and conditions apply.

Condition: used, mileage: 840 km, power: 108 kW (146.84 HP), first registration: 10/2024, overall weight: 5,700 kg, fuel type: diesel, color: orange, gearing type: automatic, emission class: euro6, loading space width: 1,495 mm, loading space length: 2,050 mm, loading space height: 400 mm, total width: 1,710 mm, total height: 2,200 mm, number of seats: 2, Equipment: ABS, air conditioning, all wheel drive, soot filter, Multicar M31 H.H.K. with Winter Package. Long-term rental possible. * 3L turbo diesel engine, 108 kW / 147 HP, Iveco engine, Euro 6, green * 840 km * Switchable all-wheel drive * Mechanical rear axle differential lock * Wheelbase: 2450 mm (short) * Hydrostatic drive with 2-step reduction * 4-channel ABS, 4 ventilated disc brakes * High-pressure comfort hydraulics * Rear hydraulics * Swing 2 front * Swing 3 front * Leak oil line front and side * Front quick-change system SWV 500 * Control panel mounting kit * 3-pin front socket * Ball-type tow hitch * Tipping cylinder module incl. traverses * 3-way tipper body with extended steel headboard and net hooks * Combo package: electric front heater, electrically heated mirrors * Air conditioning * Driver air suspension seat * Passenger comfort suspension seat * Bluetooth radio with handsfree * Heated windscreen * Safety package * Reinforced rear axle * Reinforced front axle * Reversible fan * Road speed-dependent spreading * Surface clearing function * Front-mounted automatic system * Tires: 285/65 R16C M&S * New TÜV/emissions, new inspection/service, workshop-tested * Vehicle in as-new condition * 12-month warranty Including winter package: Simed SVS.1.2E container spreader, 1.2m³ capacity, control panel, parking frame, rear lighting, new unit; Simed PMS 170 snow plow, 2m blade width, operating width at max. angle 1.70m, new unit Additional new and used attachments available from stock: - Leasing/financing/vehicle rental/trade-in/delivery available Further attachment options in new and used condition available from stock. Find more vehicles from Fuso Canter and Multicar, as well as various superstructures and attachments at: Errors and prior sale excepted. Gedpfx Ahexfdtvovsuc Our general terms and conditions apply.

Condition: used, mileage: 106,200 km, power: 110 kW (149.56 HP), first registration: 10/2018, overall weight: 5,600 kg, fuel type: diesel, color: white, gearing type: automatic, emission class: euro6, total length: 4,695 mm, total width: 1,730 mm, total height: 2,210 mm, number of seats: 2, Equipment: ABS, air conditioning, all wheel drive, soot filter, Multicar M31 C 4x4 Long with Winter Package * 3L turbo diesel 110 kW / 150 HP Iveco engine Euro 6, green * 106,200 km Godpfx Ahexym Ekevsuc * Switchable all-wheel drive * Wheelbase: 2,930 mm (long) * Automatic transmission * 4-channel ABS, 4 ventilated disc brakes * High-pressure comfort hydraulics * 2-way front plow pivot * Front leak oil line * SWV 500 front lift * External electronic ADR * Ball-head trailer coupling * Increased gross weight with reinforced front and rear axles * Light bar with 2 working spotlights (ASW) * Fog lights * LED beacon * Safety package * 4-pin front socket * Power steering * Auxiliary heater (parking heater) * Electrically heated mirrors * Electric windows * Air conditioning * Driver's air seat * Passenger double bench seat * 3-way tipper body * Snow plough (2.40 m) Gmeiner salt spreader with control panel and parking stand * Workshop checked, newly serviced and inspected, all filters and oils new, new TÜV/emissions test - Leasing / Financing / Vehicle rental / Trade-in / Delivery possible. Additional vehicles from Fuso Canter and Multicar as well as various attachments and implements can be found at: - Errors and prior sale excepted. - Our Terms and Conditions apply.

Year of construction: 1998, condition: ready for operation (used), Various old but fully functional measuring and testing devices from a grain laboratory are available. 1) Falling number tester Perten Falling Number 1402. 2) Sample cleaner A/S Rationel Kornservice Sample Cleaner MLN, weight: approx. 60kg. 3) Laboratory mill MIM 3100. 4) Hectoliter weight Louis Schopper with scale and weights. 5) Grain moisture meter Pfeuffer HOH Express HE 90, year of manufacture: 1998, measuring time: approx. 30s. 6) Laboratory mill Perten LM 3100. Documentation available. An on-site inspection is possible. Package sale preferred, however individual sale is possible. Gsdpfxjy Ey Ths Ahvjuc

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, We are offering this used Amada HFE 80-25 press brake, manufactured in 2007. The machine is fully functional and is currently in daily use. A special feature of the machine is the USB interface, which has been retrofitted. The overall condition is very good, but the machine has two minor defects. The Plexiglas panel is missing on the right side, but the door sensors are present and functioning. The right cylinder is leaking a minimal amount of oil, but this does not affect operation. You are welcome to test the machine under load. Matching tools can be purchased at a very reasonable price if desired. Gjdpfx Ahszcqk Rjveuc Transport The machine will remain in operation until our new machine arrives on July 2, 2026. Ideally, the removal should take place on the same day that the new machine is delivered, to allow for a direct exchange. If you have any questions or need more information, please send us a message or call us.

Condition: used, Year of construction: 2018, Basket diameter 1.100 mm Usable height 500 mm weight max. in kg 350 kg tank 250 l output 15,4 kW Operating temperature max. 75 °C Sporer PCS Aqua Jumbo Iso parts washer or automatic parts cleaning machine for the automatic cleaning and degreasing of workpieces using a heated, aqueous cleaning solution via a spray process. The machine operates as a top-loader with a rotating wash basket and is suitable for large and heavy components in workshops, maintenance, and industry. The Iso model features thermal insulation to reduce energy loss. The pumps are leaking and need to be overhauled or replaced. Gujdpfx Aszcga Ishvec

Condition: used, mileage: 135,000 km, power: 110 kW (149.56 HP), first registration: 09/2019, fuel type: diesel, overall weight: 3,200 kg, next inspection (TÜV): 03/2028, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, total length: 5,304 mm, total width: 1,904 mm, total height: 2,477 mm, loading space length: 2,680 mm, loading space height: 1,850 mm, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, parking heater, soot filter, Selling price to businesses for the vehicle as is. €16,900.00 gross = €14,200.00 net - No additional services from us. VW T6 long wheelbase L2 H2 high-roof panel van with a high sliding door, ideal for trades and businesses. Workshop/shelving system by Sortimo (details below) - next inspection in March 2028. Permissible total weight: 3.2 t (including reinforced 16" steel rims) Auxiliary heater, programmable Heated driver's seat Climatic air conditioning with pollen filter ++ Air conditioning is likely not functioning; the condenser may be leaking ++ Driver's seat with armrests, adjustable in multiple ways: seat height, backrest, lumbar support Passenger seat, adjustable: backrest Driver assistance systems: - Rear view camera - Cruise control Gusdpfx Ajzcuugohvjc - Driver fatigue detection - Hill start assist - Brake assist (HBA) - ABS, ASR, ESP Audio-navigation system Discover Media (touchscreen color display) - Navigation with TMC - Radio/CD player - USB, AUX-in, SD card, Bluetooth audio - Hands-free system for mobile phone with Bluetooth - App Connect (Apple CarPlay, Android Auto) prepared (can be activated) - Mobile Online Services Car-Net - Voice control prepared (can be activated) - 4 speakers, good sound quality Multifunction display Plus / trip computer Driver and passenger airbags (passenger side can be deactivated) Electrical package 1: - Electric windows - Electrically adjustable and heated exterior mirrors Central locking with remote control Fog lights with cornering function Spare wheel ## Maximum speed (Vmax) limited to 130 km/h (can be removed) ## 2. Battery with separating relay Heated windshield washer nozzles Wheelbase 3400 mm Sliding door to the cargo area on the right, high, with dark-tinted glazing Rear wing doors, high, with dark-tinted glazing, heated, windshield wiper, opening angle 250 degrees Commercial vehicle registration N1 / Van 17" chassis 6-speed manual transmission Steering wheel adjustable Floor covering in the cab: rubber and rubber mats Roof lining, comfort design Heat-protective glazing Grab handles on A-pillars Cargo area equipment: Workshop installation by Sortimo (similar to Aluca, Bott, Würth). On the left side, shelving with shelf compartments, storage compartments, drawers (5x), holder for small parts containers (without containers), toolbox holder (3x) (without toolboxes). On the right side, workbench with vise, drawers (4x), toolbox holder (4x) (without toolboxes). Fold-out vise. Cargo area partition with window. Robust wooden floor. Load securing through eyelets and fastening rails. Walls lined. LED lighting and lighting above the workbench. 2x 12V socket. Ventilation and air intake. Electrical system: External 230V connection (input). Fuse box with overload protection, RCD and 4 Schuko sockets next to the workbench. Cargo area dimensions: - Length at the bottom: approx. 268 cm - Length in the middle: approx. 261 cm - Length at the top: approx. 240 cm - Height: approx. 185 cm Tires: Mounted tires: Winter tires 215/65 R 16 with approx. 4 / 4 / 7 / 7 mm tread depth Additional tires: Summer tires 205/65 R 16 with approx. 6 mm tread depth in the front and approx. 7 mm in the rear Service history from VW workshop: 05.2021 / 41,607 km: Inspection + oil change 05.2022 / 60,106 km: Insp. + oil change 05.2023 / 83,032 km: Insp. + oil change + brake fluid 06.2024 / 107,830 km: Insp. + oil change 01.2025 / 123,676 km: Oil change, fuel filter, air filter 05.2025 / 131,654 km: Insp. + oil change + brake discs and pa

Condition: used, mileage: 4,121 km, power: 90 kW (122.37 HP), first registration: 07/2015, overall weight: 5,700 kg, fuel type: diesel, color: orange, gearing type: automatic, emission class: euro5, loading space width: 1,600 mm, loading space length: 2,050 mm, loading space height: 400 mm, Year of construction: 2015, total length: 4,735 mm, total width: 1,710 mm, total height: 2,210 mm, number of seats: 2, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), soot filter, Multicar M31 FUMO-Carrier H Tipper Hydrostat 4x4 Short Wheelbase 3.0L Diesel Engine 90KW/122HP Euro 5 with Large Municipal Hydraulics in Municipal Orange RAL 2011 ---- First registration: 08.07.2015 Mileage: 4,121 km Operating hours vehicle: 361 h Operating hours hydraulics: 349 h Previous owner: Municipal vehicle, 1st hand ---- * Iveco Engine 3.0L 90KW/122HP EURO 5 with DPF * Permitted gross weight 5,700 KG * Standard cab * Air conditioning * Three-way tipper with excavator guard (raised bulkhead) * Ball-type trailer hitch - towing capacity 3,500 KG * Pin-type trailer hitch - towing capacity 3,500 KG * Switchable all-wheel drive with mechanical differential lock and reduction gear * Large municipal hydraulic system * Rear hydraulic connections * Front leak oil line, front socket * Equipment control panel kit with power supply * 2x yellow warning beacons * Heated and electrically adjustable exterior mirrors * Electric windows * Cruise control * Tachograph * Lighting bar on cab roof with additional dipped beam and work lights (for front-mounted equipment use) * Adjustable ISRI comfort air suspension driver's seat * Adjustable ISRI comfort air suspension passenger seat * Front mounting plate for front attachments Quick-change system SWV 500 * Wide tires 285/65R16C with Goodyear winter tires as new condition Winter service equipment at extra cost: * New professional snow plow for municipal use, width 2.00 m or 2.20 m * Used snow plows in various widths * Used front-mounted brooms in various widths ---- Immediately ready-to-drive and operational vehicle from first owner, in very good condition - General Inspection/emissions test as well as service and oil change will be carried out before sale Your contact for this vehicle: Daniel Seidler Tel: Mobile: also WhatsApp Email: Gujdpfxsxrh Abe Ahvec ---- Errors and changes excepted!

Condition: used, empty load weight: 3,310 kg, maximum load weight: 3 kg, overall weight: 6,500 kg, tire size: 285/65R18, tire condition: 50 %, color: orange, total length: 435 mm, Year of construction: 2009, front tire size: 285/65R18 | 50%, rear tire size: 285/65R18 | 50%, operation weight: 6,500 kg, maximum speed: 60 km/h, Equipment: air conditioning, Tyres (front): 285/65R18, Tyres (rear): 285/65R18, First registration: 25.11.2009, Automatic towing hitch. We are offering a used Hansa APZ 1003 L transporter tool carrier from the year 2009 with approx. 40,000 km and approx. 3,600 operating hours for sale. Equipment: 133 HP, registered as LOF (agricultural or forestry) tractor tool carrier, tyres 285/65R18, diesel, rotating beacon, four-wheel steering, tipper platform. The machine has the following defects and is being sold as a handyman's vehicle: - Right rear axle drive shaft defective - Steering cylinders on front and rear axles leaking and piston rod damaged - Hydraulic oil loss in the area of the hydraulic cooler. Further details available on request. Location: 93095 Hagelstadt. Gujdeyq Ayaspfx Ahvsc

Condition: good (used), Komatsu FD25-6 Triplo 470 Freelift Diesel Trade-in forklift, a nice diesel, leaks some hydraulic oil. A video can be sent via WhatsApp. We have a continuous stock; see our website. Prices are quoted ex Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without any guarantees (see our general terms and conditions). You can make a non-binding appointment for an inspection and/or test drive. Please call in advance as we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 Gedpfx Ahjzavvajvouc 5391 LR Nuland

Condition: good (used), functionality: fully functional, fuel type: diesel, operation weight: 17,000 kg, lifting power: 4,000 kg/m, tire condition: 100 %, Year of construction: 2015, Equipment: air conditioning, all wheel drive, cabin, hydraulics, onboard computer, pallet forks, parking heater, Rotating telehandler MRT25.40 Privilege+, fully functional, with no leaks or errors. Tyres ~100%. Air conditioning. Remote control included. The machine is in continuous operation. Gsdpsy Rgtrofx Ahveuc

Year of construction: 2021, condition: used, EV Car Stator Assembly Line (2021) Designed to produce stators with a height range of 100–210 mm and a diameter of 160 mm Including manual, semi-automated, and fully automated operations Cycle time: 86 s Stations and Equipment End Plate Sub-assembly (Gluing) End plate Loctite gluing onto metal sheet stack and laser marking Grob semi-automated assembly machine (2021) Keyence laser Stator Stack Preparation Stator stack preparation (loading) and height measurement 7 metal sheet stacks with a height of 25 mm loaded on a rotating table Slot Insulator Insertion U-shaped paper insulator insertion Grob automated assembly machine (2021) Insertion of 48 “U”-shaped paper insulators 3x Winding Stations 3x copper wire winding stations, wire fed from barrels Grob automated assembly machines (2021) Maximum number of wires: 15 Insulation Tube Assembly and Cutting 6 manual stations for insulation tube assembly 1 cutting station connected via conveyor 2x Wire Pre-forming 2 automated wire pre-shaping stations 2T Kistler press Phase Separator Assembly 6 manual phase separator assembly stations between coil assembly stations, connected via conveyor 1 rotating station for stator cradle rotation 8x Stator Hot Crimping Preparation 8 manual stations for stator hot crimping preparation 2x Connector Hot Crimping 2 electric welding machines with force and current measurement Lingl PZ5 welding machines (2021) 10x Final Forming Preparation 10 manual stator final forming preparation stations Final Wire Forming Wire shaping using a 2T Kistler press 2x Lancing 2 Grob automated stator lancing machines (2021) Lancing for stator heights of 140 mm and 210 mm Phase Separator Cutting Station Teknomatik semi-automated stator lifting and pre-cutting machine Guodpfx Ahezc N Axovsc Stator Stack Skewing and Laser Welding Automated skewing, laser welding, and laser marking KUKA robot KR 250 R2700-2/FLR (2021) TRUMPF TruDisk 4002 welding laser (2021) End-of-Line (EOL) Electrical Measurement Semi-automated stations for high- and low-voltage testing ETL ATS 400 automatic test system ZAW resistance measurement tester (2023) Heat Shrink Tube Assembly Prospertech semi-automated stations for heat shrink tube placement on wires Stator Resin Impregnation Automated Tecnofirma resin application and heating process Includes: 1x induction heating zone 1x pre-heating zone 5x impregnation zones 2x infrared lamp zones 1x gelation zone 1x curing zone Integrated Minimax firefighting system KUKA robot KR 150 R2700-2/FLR (2021)

Condition: excellent (used), Weiss WT-1300/70/15 Temperature Test Chamber Manufacturer: Weiss Umwelttechnik GmbH Type: WT-1300/70/15 Water-cooled temperature test chamber with touch panel control for temperature tests in research, development, quality assurance, and industry. Technical Data Temperature range: -70 °C to +180 °C Test chamber volume: approx. 1340 liters Temperature change rate (heating): 15 K/min Temperature change rate (cooling): 10 K/min Temperature deviation (time-based): ± 0.1 to ± 0.5 K Temperature homogeneity (spatial): ± 0.5 to ± 2 K Test chamber dimensions: Height: 920 mm Width: 1100 mm Depth: 1330 mm External dimensions: Height: approx. 2050 mm Width: approx. 1300 mm Depth: approx. 3200 mm Permissible test specimen load: Test chamber floor: 150 kg Insert grid: 50 kg Electrical Data Rated voltage: 3/N/PE AC 400 V ±10 % 50 Hz Rated current: 63 A Rated power: 44 kW Refrigeration System Gusdpfx Aheza Dv Ievsc Refrigerant R404A: 14.0 kg Refrigerant R23: 5.4 kg R404A LP max.: 18 bar R404A HP max.: 25 bar R23 LP max.: 19 bar R23 HP max.: 25 bar Standby pressure: 18.5 bar Equipment Touch panel control Stainless steel test chamber Multiple insertion levels Side access port Heated door seal Water-cooled refrigeration unit CEE connector CE marking Weight: approx. 1500 kg Condition Used unit from industrial application. Optical condition as shown in the pictures. For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection Scope of supply: see pictures Inspection possible by arrangement. Loading can be organized. Subject to changes and errors in the technical data.

Condition: excellent (used), Year of construction: 1975, For sale - Hardness tester Wolpert Testor HT2001, year of manufacture 1975 Godpfxsx N Rvno Ahveuc

Condition: used, mileage: 570,000 km, power: 390 kW (530.25 HP), first registration: 10/2019, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: blue, gearing type: automatic, Year of construction: 2019, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, DAF XF 530 SUPER SPACE CAB WITH SLIDING FLOOR/TIPPING HYDRAULICS – ALCOA ALUMINUM RIMS – STAS 2019, IN EXCELLENT CONDITION – VEHICLE HISTORY – GERMAN VEHICLE – IMMEDIATELY READY FOR USE – VIDEO AVAILABLE UPON REQUEST VEHICLE EQUIPMENT – SUPER SPACE CAB – AUTOMATIC TRANSMISSION – CRUISE CONTROL – RETARDER – DISTANCE CONTROL – LANE KEEPING ASSISTANT – ACTIVE BRAKE SYSTEM – PARKING AIR CONDITIONING – STANDING HEATER Godpfezbfx Hex Ahvjuc – AIR CONDITIONING – REFRIGERATOR – LEATHER SEATS – COMFORT SEATS – HEATED SEATS – SEAT VENTILATION – ON-BOARD COMPUTER – HANDS-FREE SYSTEM – FULL AIR SUSPENSION – FULL CAB PROTECTION – ROOF-MOUNTED HEADLIGHTS – ALCOA ALUMINUM RIMS – SLIDING FLOOR/TIPPING HYDRAULICS – SIDE RAILS – ONE TANK – LARGE ADBLUE TANK ADDITIONAL INFORMATION – TIRE SIZE FRONT: 385/65 R22.5 – TIRE SIZE REAR: 315/70 R22.5 – VERY GOOD TIRE CONDITION – VEHICLE IMMEDIATELY AVAILABLE NOTE – THE 4TH CYLINDER IS LEAKING WATER – VEHICLE RUNS AND OPERATES WITHOUT PROBLEMS – DRIVING PERFORMANCE IS NOT AFFECTED – SALE PREFERABLY TO BUSINESSES OR FOR EXPORT – STAS S300ZX SLIDING FLOOR SEMI-TRAILER 93 M³ VEHICLE HISTORY – GERMAN VEHICLE – IMMEDIATELY READY FOR USE – VERY WELL MAINTAINED VEHICLE EQUIPMENT – FIRST REGISTRATION: 10 / 2019 – STAS SLIDING FLOOR SEMI-TRAILER – TYPE S300ZX – 93 M³ VOLUME – SLIDING FLOOR SYSTEM – TARPAULIN – DISC BRAKES – ABS – SMARTBOARD SYSTEM – REMOTE CONTROL – TIRE PRESSURE MONITORING SYSTEM – ALCOA ALUMINUM RIMS – PALLET BOX – TOOLBOX – 2 X LIFT AXLE (1ST AND 3RD AXLE) – JOST AXLES ADDITIONAL INFORMATION – TIRE SIZE: 385/65 R22.5 – PERMISSIBLE TOTAL WEIGHT: 36,000 KG – EMPTY WEIGHT: 7,870 KG – PAYLOAD: 29,130 KG – ALL TIRES IN GOOD CONDITION – VEHICLE IMMEDIATELY AVAILABLE – IMMEDIATELY READY FOR USE EXPORT / NOTE EXPORT SALES ONLY WITH DEPOSIT MIN. 500-2,000 EUR EXPORT ANMELDUNG EXW POSSIBLE WITHIN 10 MINUTES (AUTHORIZED EXPORTER). VEHICLE RESERVATIONS ONLY IN WRITING. VERBAL AGREEMENTS ARE NOT BINDING. SUBJECT TO CHANGES, ERRORS, AND PRIOR SALE. LEGAL THIS ADVERTISEMENT DOES NOT CONSTITUTE A BINDING OFFER WITHIN THE MEANING OF § 145 BGB. IT SERVES SOLELY AS THE BASIS FOR THE CONTRACT. ALL INFORMATION IS PROVIDED WITHOUT GUARANTEE. NO GUARANTEED CHARACTERISTICS. SALE EXCLUSIVELY ACCORDING TO OUR GENERAL TERMS AND CONDITIONS.

Condition: ready for operation (used), Year of construction: 2015, operating hours: 45,541 h, laser power: 3,200 W, travel distance X-axis: 3,000 mm, number of axes: 3, This 3-axis TRUMPF TruLaser 3030 L20 was manufactured in 2015. It features a powerful TruFlow 3200 CO2 laser with a laser power of 3200 W, making it suitable for various cutting applications. The machine has been utilized for 82,247 working hours, ensuring reliability and performance. If you are looking to get high-quality laser cutting capabilities, consider the TRUMPF TruLaser 3030 L20 machine we have for sale. Contact us for further details. - Laser Type: TruFlow 3200 (CO2)- Laser Power: 3200 W- Working Hours (NC): 82,247 h (as of 04.05.2026)- Working Hours (Laser On): 80,633 h (as of 04.05.2026)- Working Hours (Beam On): 45,541 h (as of 04.05.2026)- Nominal Voltage: 400 V- Phase Configuration: 3~- Frequency: 50 Hz- Connected Load: 73 kVA- Control Voltage: 24 V- Main Fuse Protection: 125 A- Nitrogen Connection (N2): 30 bar- Oxygen Connection (O2): 20 bar- Compressed Air Connection: 7-10 bar- Documented Maintenance Issues (07.05.2026): White connectors degrading due to plasticizer loss; Laser power not reaching set value; Oil spray unit non-functional (not utilized); Cooling fan runtime limit reached (+500h extended); Filter mats worn out/need replacement.- Control System (Software Version): SINUMERIK 840D SL- Configuration: Standard configuration- CoolLine (Option): Not included- Cross Conveyor (Option): Not included- Fire Extinguishing System (Option): Not included- Integrated Leak Test (Option): Not included Godpfx Aoza Uuhohveuc

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 3,300 mm, total height: 2,500 mm, total width: 1,650 mm, overall weight: 9,600 kg, product height (max.): 455 mm, feed force X-axis: 600 N, feed length X-axis: 180 mm, input voltage: 400 V, type of input current: three-phase, warranty duration: 12 months, # Hydraulic CNC Servo Press Brake MTP 160x3200 The Hydraulic CNC Servo Press Brake MTP 160x3200 is a modern machine designed for precise bending of mild steel, stainless steel, and aluminum sheets. With a pressing force of 160 tons and a bending length of 3200 mm, it is suitable for both serial production and custom fabrication. The machine is equipped with the MTP-3212 CNC controller and 4 CNC-controlled axes (Y1, Y2, X, R), ensuring high accuracy, repeatability, and fast positioning. The intuitive controller with a large color touchscreen allows easy programming, automatic bending calculations, and storage of programs and tooling data. The press brake incorporates high-quality components from leading manufacturers, including a Rexroth hydraulic system, Schneider Electric components, and Omron safety devices. Steel hydraulic connections improve reliability and minimize the risk of leaks. For operator convenience, the machine features a mobile control panel, two front support arms, and LED working area illumination. Safety is ensured by a light curtain, side guards, rear safety protection, and easily accessible emergency stop switches. The machine is supplied with a CE Declaration of Conformity and an English user manual. ## Technical Specifications * Pressing force: 160 T * Maximum bending length: 3200 mm * Maximum sheet thickness: up to 8 mm * Control system: MTP-3212 CNC * Number of CNC axes: 4 (Y1, Y2, X, R) * Distance between side frames: 2600 mm * Throat depth: 320 mm * Ram stroke: 180 mm Guedpfx Aozcmrdohvjc * Maximum opening height: 455 mm * Back gauge travel (X-axis): 600 mm * Tool clamping system: AMADA quick clamping * Motor power: 11 kW * Power supply: 400 V / 50 Hz * Dimensions (L × W × H): 3300 × 1650 × 2500 mm * Weight: 9600 kg ## Additional Information * Professional technical support included * Assistance with tooling selection and bending parameters * CE Declaration of Conformity included * English user manual supplied * Spare parts support during and after the warranty period * Possibility to extend the warranty beyond the standard warranty period The machine is sold on an EXW basis. Transportation can be arranged upon request and quoted separately depending on the delivery destination. Our team will be pleased to provide a competitive transport quotation to any location within Europe and worldwide. For more information about our company, machines, and services, please visit our website. Metal Technics Polska is a trusted supplier of industrial machinery, offering professional sales support, technical assistance, spare parts availability, and after-sales service for customers throughout Europe.

Condition: used, Year of construction: 2015, operating hours: 9,583 h, 2015 | Caterpillar 314E LCR with 1 excavator bucket | Used Tracked Excavator | 9583 hours 📍Location: Switzerland 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 48800 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 68 inspection points 56 approved ✅ 11 imperfect ℹ️ 1 issues ⚠️ 📌 Inspector's Comment: TILT BUCKET IS NOT INCLUDED. Good operating excavator, drivetrain a bit noisy, installed Cat product link system, camera and Oilquick quick coupler, 1 bucket , hydraulic oil level a bit low, good engine performance , autolube leaks a bit from hose, small play on swing drive as well as pins of the boom and the blade cylinders 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40585 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options Gjdpfsyyp Taox Ahvjuc 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2023, operating hours: 4,326 h, 2023 | Caterpillar MH3026 | Used Material Handling Excavator | 4326 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 209000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* Gsdpozbbmaefx Ahvouc 👷‍♂️ Inspected by an independent expert 57 inspection points 57 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: As it is in daily use condition and hours may vary. The oil leak need to be managed on the engine. Despite that it is a good machine. Computer readout is available. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40849 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2022, operating hours: 5,102 h, 2022 | Hitachi ZX350 LCN-7 with 2 excavator buckets | Used Tracked Excavator | 5102 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 149800 or Make an Offer. Gsdpfxjytf T Uj Ahvsuc Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 65 inspection points 65 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: No leaks. Strong engine. No noises from pump. Well maintained however dirty due to working envioroment. Could not test the driving properly, however it seems to be ok. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40204 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.