Used Hohner Hsb 7000 for sale (850)

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 3,500 mm, total length: 7,050 mm, total width: 4,100 mm, volume flow: 36,000 m³/h, temperature: 80 °C, input voltage: 380 V, heating capacity: 250 kW (339.91 HP), Equipment: cabin, lighting, Paint and Drying Booth It is the centerpiece of your entire painting operation: the combined paint and drying booth. (Alternatively available as a separate paint booth with a dedicated dryer.) Our solutions feature full-surface ceiling filters and, optionally, full-surface floor extraction with drive-over grating or wall extraction at the position of your choice. If you wish to further increase the efficiency of the system beyond heat recovery and infinitely variable control via frequency converter, we can also offer you a sectional control system. This enables you, for example when doing spot repairs or partial booth loading (such as painting only add-on parts), to activate only the section where the parts are located. This allows you to operate with a reduced air volume, save energy, and minimize costs, all without compromising quality. Feel free to contact us – we would be happy to demonstrate these options in detail. Ljdpexa H Ewofx Aiisab Do you have any questions or suggestions? We are happy to assist you.

Condition: new, Year of construction: 2025, total height: 4,000 mm, total length: 7,000 mm, total width: 3,000 mm, warranty duration: 24 months, temperature: 80 °C, air demand: 36,000 m³/h, input voltage: 380 V, heating capacity: 345 kW (469.07 HP), power: 40 kW (54.38 HP), fuel: liquid petroleum gas (LPG), energy consumption: 40 kWh, insulation material: Mineralwolle, insulation thickness: 50 mm, nominal power: 345 kW (469.07 HP), Equipment: lighting, MAIN STANDARD Our paint booths are designed to meet all necessary requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. Booth processes are managed via a PLC system, ensuring that desired values are maintained consistently. OPERATING PRINCIPLES OF THE BOOTH The booth’s processes are managed through a control panel, which oversees the following steps: PAINTING PROCESS During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled through the extraction unit. Floor filters (paint stop filters) collect paint particles, and the air passes through final exhaust filters before being discharged. FLASH-OFF PROCESS After painting, the booth continues operating for approximately 15 minutes to purge residual solvents and thinners. During this phase, fresh air circulates from outside into the booth. DRYING PROCESS In this stage, 80% of the air passing through the booth is heated to 60°C and introduced via a distribution system. Since 20% of the solvent is released during drying, it is expelled with the exhaust air. Industrial coatings are typically dried at 60°C, but the booth temperature can be adjusted as needed via the control panel. Ledpfx Aiewzmcbjieab COOLING PROCESS After the 30-minute drying cycle, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the subsequent 5-minute cooling phase, fresh air from outside circulates through the booth, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT These control panels govern the functions and operation of machines and devices housed within the booth. The panel is made of durable galvanized sheet and steel profiles and is fully enclosed to protect against dust and moisture. Electrical Equipment and Control Panel: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control connections between the control panel and motors or other electrical devices. • Electrical wiring is designed to accommodate booth relocation if needed. • Operating equipment uses 380 V 50 Hz, while control devices operate at 220 V. • The booth’s operation time can be monitored on the electronic control panel, enabling straightforward maintenance scheduling. • Temperature and time settings for booth ventilation (solvent flash-off), intermediate drying, and final drying can be easily adjusted to required values on the digital display of the electronic control panel. • Users can monitor and adjust the drying time using the heating thermostat and time relay.

Condition: used, Year of construction: 2008, Technical details: bore capacity in steel (diameter): 100 mm max. pitch circle: 7000 mm number of spindles: 2 bore spindle turning speed range: 1 - 3000 U/min high speed spindle taper ISO: 50 bore slide stroke: 900 mm feed speeds: 1 - 6000 mm/min max. workpiece weight: 18000 kg total power requirement: 125 kW dimensions of the machine ca.: 13 x 11 x 5,1 m with CNC SIEMENS 840 D Workpiece clamping up to dia. 7000 mm The machine is equipped with 2 drilling spindle supports and through spindle coolant (50 bar)both supports can drill simultaneously. Spindle taper SK 50, 2 stages 1 -600 rpm 1650 Nm and 1 - 3000 rpm. 300 Nm Chip conveyor and coolant device Lsdpfx Aijvb Drheisab *

Condition: good (used), functionality: fully functional, Year of construction: 2003, operating hours: 593 h, load capacity: 1,400 kg, lifting height: 7,000 mm, free lift: 2,330 mm, load center: 500 mm, mast type: triplex, construction height: 2,950 mm, battery capacity: 620 Ah, battery voltage: 48 V, fork length: 1,150 mm, Nice reach truck with 2019 battery. Rocla F14 TREV 7000 Load capacity: 1400 kg. Lift height: 700 cm. Overall height: 295 cm. Free lift: 233 cm. Fork length: 115 cm. Side shift. Free lift. Fork tilting. Year: 2003 Operating hours according to hour meter: 593 Battery: Year 2019, 48V 620Ah Lsdpfx Aiowxtxwjioab The machine has hardly been used since the battery was replaced. Including charger. Can be loaded onto a truck free of charge. For transport in a standard Eurotrailer, the mast can be dismantled for a small additional fee.

Condition: excellent (used), Here we offer you a Johansson coordinate measuring machine. The coordinate measuring machine for measuring large workpieces. Measuring machine Johansson Cordimatic 7000 with Renishaw Retrofit (control, rotary/swivel probe & probe exchange library) Johansson Cordimatic 7000 measuring machine with Renishaw PH10T rotary/swivel head Measuring range - 28" x 17" x 13.5" Granite table size - 42" x 28" x 8" Equipped with: Calculator Metrologic 1 joystick trailer controller Metrologic software manuals Joystick and control from RENISHAW SPA2 servo power amplifier UCC2 Controller Type: Johansson Cordimatic 7000 coordinate measuring machine Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, details are reserved!) Further questions we can answer on the phone for you. Lodpsg Iiqfefx Aiieab

Condition: ready for operation (used), Fanuc A06B-0123-B075 #7000 SN: 278697 AC servo motor, used, normal signs of wear, 100% fully functional, scope of delivery as per photos. Lodpfx Asx Ip Eroiieab

Condition: ready for operation (used), Fanuc A06B-0317-B002#7000 AC servo motor , serial no. according to photo , hole spacing of mounting holes: 142 x 142 mm, Ø drive shaft: 35 mm ,used, encoder cover damaged, otherwise normal signs of wear, 100% functional Lasdpoi D H Dfsfx Aiisb

Condition: ready for operation (used), Fanuc A06B-0502-B067#7000 AC Servo Motor, Ø drive shaft: 35mm, hole spacing of the mounting holes: 142x142mm, used, 100% functional Lsdpfxsi D H E Ss Aiijab

Condition: ready for operation (used), Fanuc 20S / 3000 A06B-0318-B032 # 7000 AC servo motor SN: C90XAA2918, used, good condition, 100% functional, scope of delivery as per photos Ledpfx Aijugyy Hsisab

Condition: ready for operation (used), Fanuc A06B-0514-B569#7000 AC servo motor , hole spacing of mounting holes: 102 x 102 mm, Ø drive shaft: 19 mm, used, good condition, 100% functional Lsdpfxei D H Ifj Aiisab

Condition: new, Fanuc A06B-0142-B076#7000 servo motor SN: C987ZA6263, unused in opened original packaging, 100% functional, scope of delivery as per photos Laodowl Sxcjpfx Aiisb

Condition: ready for operation (used), Fanuc A06B-0514-B502#7000 AC Servo Motor, serial number as per photo, hole spacing of the mounting holes: 102 x 102 mm, Ø drive shaft: 19 mm, used, normal signs of wear, 100% functional Lodpfx Aisi D H H Eeijab

Condition: ready for operation (used), Fanuc A06B-0127-B588 # 7000 AC Servo Motor SN: C996C5352, used, in good condition, 100% functional, delivery as per photos. Lodpoxpttmefx Aiieab

Condition: new, Fanuc A06B-0123-B675#7000 AC servo motor, serial no. according to photo, unused, 100% functional, scope of delivery according to photos Lodpfji D Hwcjx Aiisab

Condition: ready for operation (used), Fanuc A06B-0166-B075#7000 AC Servo Motor SN:C994A3770, used, normal signs of wear, 100% functional, scope of delivery as per photos Laodpfxoi D Uv He Aiijb

Condition: used, operating hours: 20 h, Fuel type: Diesel Lasdpfeuu Df Dex Aiiob

Condition: ready for operation (used), Fanuc A06B-0123-B075 # 7000 AC servo motor SN: C969C3311, used, in good condition, fully functional, scope of delivery as per photos. Laedpfxjx Htyko Aiisb

Condition: ready for operation (used), Fanuc A06B-0128-B175 # 7000 AC servo motor SN:C96XC1543, used, in good condition, fully functional, delivery as shown in the photos. Ljdpfx Aiox Htywjisab

Condition: like new (used), machine/vehicle number: ESD EG 64/32 HG, 7000 pieces plastic crate 600x400x320mm ESD EG 64/32 HG Auer or UTZ/RAKO Used goods, in very good condition, almost new, see photos Stickers may be present on the crates, but easy to remove! Content: 66 Liters Load capacity per crate: Stacking capacity: Type: ESD EG 64/32 HG Lasdpfx Aowl Ditoiiob Outside length: 60 cm / inside length: 37 cm Outside width: 40 cm / inside width: 27 cm Outside height: 32 cm / inside height: 31.5 cm Stacking height (usable height inside): 30.3 cm ESD stacking containers 60x40x32cm Colour: Black Completely closed containers Dimensionally stable and robust Stackable on top of each other 40 pieces per pallet Negotiated price: € 11.00 net from stock Sale price: € 11.00 net from stock when purchasing at least 1 pallet (40 pieces) * Goods are in stock. * Transport and assembly possible on request. * Viewing always possible by appointment. * Further information on request. More than 1000 linear meters of pallet racking from various manufacturers in stock. Also 100,000 plastic containers in stock. Transport containers or for storage/grab containers. (Changes and errors in technical data, specifications and prices reserved, as well as prior sale! See our AV, all prices excl. VAT from stock).

Condition: ready for operation (used), SER C100 FA- 172 grinding spindle, 7000 rpm, 1.3 kW, used, normal signs of wear, 100% functional, delivery as shown in the photos. Lsdpox Eq Ipofx Aiioab

Condition: ready for operation (used), Fanuc A06B-0315-B002 # 7000 AC Servo Motor SN:G-921155, used, normal signs of use, 100% functional, scope of delivery as per photos Ljdsll Dg Sopfx Aiioab

Condition: ready for operation (used), Fanuc A06B-0377-B577 # 7000 AC servo motor SN: C991F2251, used, in good condition, 100% fully functional, scope of delivery as per photos. Laedpfxsx Dt I Ho Aiieb

Condition: ready for operation (used), Fanuc A06B-0185-B277 #7000 AC servomotor, serial number: C99ZA4319, used, in good condition, 100% functional, scope of delivery as per photos. Lsdpfx Aiox Dtz Teijab

Condition: ready for operation (used), Fanuc A06B-0502-B10#7000 SN: C974M0094 servomotor, used, normal signs of wear, 100% fully functional, delivery as per photos. Laodpfx Asx Dt Nweiiob

Condition: good (used), Year of construction: 2018, functionality: fully functional, container length: 12 ft, We are selling this functional dryer due to a change in the heating concept at our biogas plant. Can be inspected on site. Lsdjvg Nwaspfx Aiijab Dismantling, transportation and reinstallation on request.