Used Holzhäuer Cone Splitter Log Splitter Ks-T4 for sale (5,654)

Condition: new, maximum load weight: 14,900 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 5,900 mm, total width: 2,550 mm, total height: 1,075 mm, Year of construction: 2026, Equipment: ABS, rapid+ 2-axle short timber trailer A2G-LZ59-L ALPHA * Only 3,100 kg tare weight * Air suspension * 2 single axles, manufacturer SAF, 9 tons with disc brakes, including safety cables * Tires: 275/70 R 22.5 on high-gloss aluminum rims * Air tank made of aluminum * EBS braking system * Full LED lighting * 4x LED work lights (1,800 lumens) * 1x grapple cable * Paint: frame/bolster color graphite black * Drawbar type GNZ 27, drawbar eye Ø 40 mm + support surface on the drawbar * Lateral impact protection according to ECE?R 73 * For the transport of 2 x 3m / 1 x 4m / 1 x 5m / 1 x 6m timber Bljdpehnak Defx Ahmsn * ExTe D7 bolster, ExTe D7 EURO-C stakes Plus TÜV inspection. Ex works Mildenau. All prices plus registration and legally applicable VAT. Subject to change and prior sale. Further information upon request. Information without guarantee. Illustrations may differ from the original. DOLL lightweight construction: This DOLL 2-axle trailer represents modern vehicle construction and efficient timber transport. The trailer offers the proven DOLL quality – practical and safe. Contact: Niclas Lott Tel.:

Condition: new, maximum load weight: 35,700 kg, overall weight: 42,000 kg, axle configuration: 3 axles, loading space length: 10,735 mm, total width: 2,550 mm, Year of construction: 2025, Equipment: ABS, 3-axle semi-trailer LOGO 14X specifically designed for OFF-ROAD and ON-ROAD use! * Electronic air suspension * 3 individual axles, manufactured by SAF, 9 tons each with disc brakes * 1st axle can be lifted, 3rd axle is steered * Remote control for operating the frame locking and the brakes * Manual support legs Bsdpfx Ahjhnak Ijmeln * Stanchions: 8x ExTe D7 (Position 1 with double pockets, Position 2 adjustable and with flat stanchion pockets, as well as with a quick-release wedge system) * Posts: 14x ExTe D7 telescopic posts, 2x ExTe D10 telescopic posts * Tires: 385/65 R 22.5 on steel rims * EBS braking system * LED tail lights with integrated triangular reflector * 4x LED work lights (1,800 lumens) * Air tank made of aluminum * 1x grab rope * 1x shunting coupling * Frame + stanchions ExTe D7 in RAL 9011 graphite black * All components comply with EC regulations Various additional equipment available. Further information on request. Illustrations may differ from the original. Specifications are subject to change without notice. Contact: Niclas Lott Tel.:

Year of construction: 2026, condition: as good as new (ex-display), These parts washers are designed for spray washing, using aqueous detergents at a temperature of 60°C maximum. All machines are made of AISI 304 stainless steel and they are models for one wash treatments. These machines function thanks to the basket’s motorized rotation around its vertical axis and they are suitable for washing small and medium-sized parts, with moderate weights. Bsdsfzblqepfx Ahmsln

Year of construction: 2020, condition: new, ROMER® deals with the production of single technological equipment for powder coating plants as well as complete fully automatic turnkey coating plants. ROMER® provides heating solutions for the aero and automotive industries for the largest corporations in the world. We provide warranty and post-warranty service for devices sold by us with a full range of spare parts. the trawl applied to a poorly prepared surface will fall off or corrode after a short period of time. Ensuring the best coating is essentially good degreasing - which is the basis of any painting. The coating of a poorly degreased detail will fall off after a very short time. After degreasing, the next step is to tear down the outer coating of the detail, which improves paint adhesion, e.g. when bending sheet metal, and protection, e.g. with a phosphate layer, which in turn will prolong corrosion resistance. There are many solutions that solve the above issues. What is the most important thing in a powder coating shop? You probably don't have experience with the applicator. Nothing more wrong, even the best applicator will not help you if your oven has bad temperature distributions, in the place where the element is overheated, the paint will discolor and where not heated, the paint will fall off. First of all, the stove is the most important. Oil, gas or electric furnace? You don't know how to power your stove? how is cheaper what does this involve? What are the operating costs? Blsdsfz A H Depfx Ahmen We will try to answer your questions. Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at the same time and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution.

Condition: new, Year of construction: 2025, You are looking for a real machine and not a toy, then you have come to the right place: Fiber laser laser engraver large format X1130 x Y665 x Z260mm Laser markers skyLaser Mark - 2D optional 3D fiber laser engraving / marking laser is the complete solution for your complex laser engraving applications (* Prices depending on the equipment, this is a brand new laser machine from our production) Our skyLaser Mark systems are used exactly where conventional CO2 laser technology has its limits. Using the fiber laser with a wavelength of 1064nm, even the most delicate structures can be realized in almost any material. In contrast to conventional milling processes, the laser works without contact, force-free and without tool wear. The advantages in your application are the geometric flexibility and high processing accuracy. This type of processing can be used regardless of the hardness of the workpiece to be processed. The flexibility of the system increases with the mobile work table that can be adapted to your needs. You can easily integrate the system into your production line or operate it as a stand-alone solution. Our skyLaser Marks provide very precise and permanent markings (laser engravings) and are suitable for the special laser application area metal and certain organic substances. Bodpfxef U Spxe Ahmoln The use of a variety of fonts, the application of barcodes, serial numbers, logos and images is effortlessly possible. Thanks to the excellent resolution, almost all requirements for marking tasks can be solved. Production of stamps, engravings, lettering and complex, fine structures, the software is extremely user-friendly. Even very complex and time-consuming marking tasks can be easily created on the supplied industrial PC. You can do the exact positioning in next to no time, thanks to the optional observation camera for process tracking and software-supported workpiece alignment. Since the system has hardly any wearing parts and, thanks to the IPG laser technology, is almost maintenance-free, it can be used especially for industrial applications as well as in continuous use. The skylaser marking laser / engraving laser at a glance: Processing area: from 110 x 110 or 120x120 or fiber laser laser engraver large format with integrated axes X1130 x Y665 x Z260mm Laser source: IPG (pulsed fiber laser, YTTERBIUM PULSED FIBER LASER) SCANLAB SCANcube galvanometer scanner Nominal laser power: 20W New: software-controlled, variably adjustable working height (Z, axis max. 260mm depending on the structure) Optionally other work areas - automatic material feed, etc. Air cooling because of low energy consumption! Marking speed: up to 5000 mm / s (SCANLAB dyn AXIS ® galvanometer scanners the SCANcube ® achieve marking speeds of up to 640 characters per second.) Redundant security system Laser class: 1 or, depending on the configuration, laser class: 2 (with optional pilot laser) Pfeifer-technology HQ mirrors and optics for perfect results, powerd by Scanlab (R) pfeifer-technology industrial PC including pre-installed control software New: incl. Laser Focus Finder New: including process air control New: including extraction control Optional: Positioning laser: integrated diode laser for optimal positioning New including F-Theta lens 110 x 110 mm work area with protective glass! Fiber laser laser engraver large format X1130 x Y665 x Z260mm almost maintenance-free

Condition: excellent (used), Automatic filling system Logdos Späth GmbH Type K-DOS.F/AL 40/EX for filling liquids into buckets, jerricans, IBCs and drums ATEX-protected mobile, can be moved on rollers compact dimensions: 3m x 2m x 2m (L x W x H) Programmable X/Y axis and palletizing Bsdpfjiyytqex Ahmjln Very good condition, directly from production!!!

Condition: good (used), Chassis, support wheel, tandem cargo wheel, load rollers, steering roller, support roller, fixed roller, swivel wheel, support wheel bracket Bsdji Dpzajpfx Ahmjln -Support roller: Support wheel from Logitrans SGL 2000V pallet stacker -Wheel size: Ø 170 mm -Quantity: 1x support roller available -Price: per piece -Dimensions: 240/155/H275 mm -Weight: 14 kg

Condition: new, Year of construction: 2026, Yanigav Log Splitter FB25 • Weight: 730 kg with hydraulic winch • Dimensions (LxWxH): • Power: 25 t • Motor: Hub drive PTO • Log length: 50-115 cm • Log diameter: 35-80 cm Bljdpfxer D Ng Ts Ahmjn • Wedge length: 35 cm

Condition: new, Year of construction: 2025, Yanigav Earth Auger TAM 245 • Simple three-point hitch • Very robust, welded chassis • Versatile, high-performance gearbox from 30 to 90 HP Bleder Ezniepfx Ahmen • Usable auger diameters from 10 cm to 80 cm and up to 1.80 m in height • Offset of 1.30 m on each side of the axis • Chassis length: 245 cm • Auger tilt adjustment (front/back and right/left) • Auger not included

Condition: new, maximum load weight: 34,720 kg, overall weight: 39,500 kg, axle configuration: 3 axles, loading space length: 9,195 mm, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, 3-Axle Semi-Trailer LOGO 10X * Steel flat sheet cover welded over kingpin * Steel chequer plate cover welded at the rear * Electronic air suspension * 3 single axles, SAF brand, 9 t with disc brakes * 1st axle liftable * Manual landing gear * Bolsters: 6x ExTe D10 (position 4 with double pockets, position 5 with flat stanchion pockets and quick-release wedge system) * Stanchions: 8x ExTe D7 telescopic + 4x ExTe D10 telescopic * Tyres: 385/55 R 22.5 on steel rims * EBS brake system * LED tail lights with integrated triangular reflector Bledpfxerymwze Ahmen * 4x LED work lights (1,800 lumens) * Air tanks made of aluminium * 3x grab protection devices between the bolsters * Frame + bolsters in RAL 9011 graphite black * All add-on parts according to EU regulations Images may differ from the original. Information subject to change without notice. Contact: Niclas Lott Tel.:

Condition: good (used), I offer here a set from Schechtl Blsdsudbzmepfx Ahmen Folding bench KS with foot closer and guillotine shear HT 150 Both have a capacity of 1.5mm iron - aluminum significantly more Working length a little over 1.5m Plate shears with depth stop guillotine shears with high quality front support with blade (optional spare blade available)

Condition: used, Year of construction: 2021, number of beds: 2, _____Basic equipment:Base frame for mounting on carrier vehicle with technical compartment for protected storage of components- 60001 GRP safety tank with baffle walls- 6-cylinder piston diaphragm pump with hydraulic drive from vehicle min. 40 l/min incl. 21/2" suction fitting with external suction via Storz C-coupling and pressure switch fitting- Spray bar with 1" stainless steel nozzle line mounted at the rear, incl. tip protection in front of spray bar- Manually operated triple nozzle holder for turning with 3-fold nozzle set for different application rates- Limit switch for safe filling- 2" external filling connection with Storz C-coupling and pressure switch fitting Manually operated triple nozzle holder for turning with triple nozzle set for different application rates- Limit switch for safe filling- 2" external filling connection with Storz C-coupling- Low-level drain tap with Storz C-coupling- Mechanical fill level indicator- Electro-pneumatic pressure filter flushing- Plug-on RKL at the rear- Position lights on spray bar left and right: front white, rear red- The nozzle carrier can be switched on and off pneumatically to prevent dripping- The application rate is controlled and monitored fully automatically via a Spray-Dos computerMore equipment:- Draw hook: base frame as draw hook design- Spray bar can be folded up- Spray bar 2.50 m- Pump capacity 320 l/min 2 1/2" suction filter Bledpfx Aouw Dnxohmen

Condition: as good as new (ex-display), Year of construction: 2026, Ultrasonic cleaning unit with pneumatic goods lift and oscillation during the cleaning process Bjdpfxjh Rmpde Ahmoln including surface rinsing/oil separator Platform dimensions: approx. 670 x 420 mm max. usable height: approx. 300 mm max. load capacity of goods lift: 100 kg Volume: 200 liters (incl. oil separator) Material of tank and outer casing: stainless steel 1.4301 Ultrasonic power as bottom sound: 1,600 watts (effective) / 3,200 watts (peak). Frequency 38 kHz (suitable for aluminum and non-ferrous metals) including level monitoring and dry-run protection Unit is equipped with rollers (movable) Total electrical connection power: 8 kW External dimensions: 1,300 x 1,000 x 1,000 (h) mm Total height including goods lift and open lid: 1,500 mm

Year of construction: 2024, condition: new, The plant is available immediately ! - suitable for log diameters from 10 cm up to 50 cm - suitable for 2 - 6 m log length - 4-strand infeed conveyor 6 m long - 4 - strand separator 2 m long - 4 - strand separator 2 m long - Conveyor with pin conveyor chain M 112 with gentle rollers - block conveyor with 2 inch chain and flights - Special carrier for low-noise transport - Measurement with 1 mm resolution - Measuring frame with additional heating and sunshield - Display of all operating states on a 17" monitor - Fully automatic sequence control - Various storage options and sorting criteria - 5 ejectors right/left via SEW gear motors with brake Bljdpfx Ahsgvu Aljmon - Spacious heat-insulated control cabin - 4 monitoring cameras with flat screen - Control cabinet with all cables - Sorting criteria according to agreement

Condition: used, axle configuration: 2 axles, first registration: 08/2013, Equipment: ABS,

Condition: new, Year of construction: 2023, Details of the Two Shaft Shredder KS 1000/2 Bjdpfjd Sblmex Ahmjln Engine: 2x 15kW Engine speed: 16,5 U/min - 7269NM Blade Strength: 19mm Working width: 1000mm

Condition: used, empty load weight: 3,180 kg, maximum load weight: 14,820 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 07/2013, loading space length: 5,800 mm, loading space width: 2,420 mm, loading space height: 1 mm, suspension: air, tire size: 385/65R22.5, color: black, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2-axle, turntable, air-suspended, lifting+lowering, ABS (anti-lock braking system), U-protection, stanchions Bedpfxeq T Syto Ahmoln Body: Wooden trailer with 8 Exte stanchions Disc brakes! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: used, empty load weight: 6,500 kg, maximum load weight: 25,500 kg, overall weight: 32,000 kg, axle configuration: 2 axles, first registration: 04/2001, suspension: air, tire size: 315/80R22.5, color: green, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2-axle, BPW axles, air-sprung, 1st axle liftable, last axle forced steered, ABS (anti-lock braking system), extendable, U-protection, supports, twin tires, stanchions Body: 2-axle timber transport trailer with 5x stanchion stools, extendable from 10.75m to 14.35m 2x 10t BPW axles, drum brakes, 1st axle liftable, 2nd axle hydraulically forced steered. ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Blsdpfxjq T Szie Ahmjn - .

Condition: new, overall weight: 18,000 kg, axle configuration: 2 axles, total width: 2,530 mm, Year of construction: 2025, Equipment: ABS, 2-Axle Self-Steering Trailer, Type M2K-9L * COMPACT steering system * Corrosion resistance through powder coating * All components are bolted on * Conventional wiring * Brackets and components in stainless steel or galvanized * 2 individual axles, manufacturer BPW, 10 t with disc brakes, including safety cables * Air suspension * Air reservoir made of aluminum * Bogie model IX, with 1x mechanically telescoping beams * Tires 275/70 R 22.5 on steel rims Blsdpfx Asgqc Hbshmsn * EBS braking system * LED tail lights with integrated triangular reflector * 4x LED work lights (1,800 lumens) * Manual central lubrication * Paint: RAL 9011 Graphite Black * Payload approx. 14,550 kg 2-Axle Self-Steering Trailer, Type M2K-10B * Differences from M2K-9L: * Leaf spring suspension * 2 individual axles, manufacturer BPW, 12 t with drum brakes, including safety cables * Bogie model IX, with 1x hydraulically telescoping beams * Tires 315/80 R 22.5 on steel rims * Electric central lubrication * Payload approx. 14,100 kg 2-Axle Self-Steering Trailer, Type M2K-10L * Differences from M2K-9L: * 2 individual axles, manufacturer BPW, 12 t with drum brakes, including safety cables * Bogie model IX, with 1x hydraulically telescoping beams * Tires 315/80 R 22.5 on steel rims * Electric central lubrication * Payload approx. 14,100 kg 2-Axle Self-Steering Trailer, Type M2R-10L Differences from M2K-9L: * ratio steering system (4-cylinder) * 2 individual axles, manufacturer BPW, 12 t with drum brakes, including safety cables * Bogie model IX, with 1x hydraulically telescoping beams * Tires 315/80 R 22.5 on steel rims * Electric central lubrication * Payload approx. 13,965 kg Various optional equipment available. Further information on request. Illustrations may differ from the original. Specifications are subject to change without notice. Contact: Niclas Lott Tel.:

Condition: used, Year of construction: 1995, load capacity: 1,000 kg, lifting height: 800 mm, construction height: 1,230 mm, fork length: 1,140 mm, drive type: Handbetrieb, construction width: 515 mm, Scissor lift truck Fork width: 160 mm Fork thickness: 50 mm Condition: Ready for use and fully functional Technical condition: good Front tires Type: Polyurethane Bjdpfx Ahjt Hm Dtomeln Front tires Condition: 40 - 60% Rear tires Type: Polyurethane Rear tires Condition: 40 - 60% Stainless steel version

Condition: new, Year of construction: 2024, Sanding belt dimensions: 150 x 2280 mm Blsdpfxodq H D Ss Ahmen Motor power: 2.2 kW Sanding belt oscillation Pneumatic sanding belt tensioning Sanding head can be swivelled 90° - 180° Additional table at the idler pulley

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 2026, Optical precision drill grinding High-precision and very easy-drill grinding with optics and , Costsaver and Swiss in 100% quality. grind drills, thinning and check in the shortest time and with maximum precision. With MEGA POINT blue line you win more than once, achieve with it: - Better positioning - Improved accuracy of diameter - Significantly longer service life Bsdpfj R R R Sex Ahmjln - Feed force is greatly reduced The MEGA POINT blue line is a versatile precision drill grinding machine, which is easy and ergonomic operation and a variety of drills handelsueblichen nachschleift perfect and optimized. MEGA POINT blue-line 1-20mm (Optiom to 30mm) Technical specifications: Our MEGA POINT drill grinding allows precise and rapid regrinding and thinning all handelsueblichen drills. Our customers have so always perfectly ground drills for disposal. The sophisticated design provides enormous flexibility in terms of the different cut angles and the thinning of the drill. Without a doubt, the world's best conventional drill grinding! Technical specifications Drill material grinding HSS and carbide HSCO Point angle adjustable 80 ° - 150 ° optional tip angle adjustable up to 180 ° Chuck with collets for drill diameters from 1 to 6.5 mm Chuck with collets for drill diameter 7 - 20 mm optional Spannzangenset for drill diameter 20 - 30 mm Average / free angle adjustable 0 - 40 ° Ausspitzvorrichtung, Ausspitztiefe adjustable CBN grinding wheel double-fine / coarse D 125 mm optional DIAMOND grinding wheel (for carbide drills) D 125 mm CBN grinding wheel for thinning D 50 mm x 4 mm Engine power 0.3 kW Spindle speed 2800 r / min Power supply 230 volt 50 Hz Dimensions (L x W x H) 50 x 50 x 50 cm Weight about 42 kg Standardausfuehrung For right- and left-cutting, two- and dreilippige drills. With built-in optics (10x Zoom) separate Ausspitzvorrichtung and: 1 Machine light 2 chucks with collets D 1 -6.5 mm and D 7 - 20 mm 1 CBNDoppel grinding wheel D 125 mm fine / coarse 1 CBNSchleifscheibe D 50 x 4 mm 1 Set of service tools 1 instruction manual with spare parts list 1 CD-ROM with manual (CE Declaration) Danger: OPTIMA / TATAR Parts BERGER technology will take over on January 1, 2016, the stock of spare parts of HighTech OPTIMA AG. We can now offer genuine spare parts and service for the OPTIMA and TARTAR Boherschleifmaschinen.

Condition: new, Year of construction: 2025, machine/vehicle number: 2021, 3D AC SERVO SkyCNC WK Series Milling Machine - 2050mm x 3050mm x 220mm High precision - milling and drilling with extremely high speed and quality. As a CNC milling machine manufacturer, pfeifer-technology is your partner with skycnc CNC milling machines and engraving machines. Our PFEIFER technology skycnc WK series milling machines with high-precision ball-spindle drive on all axes offer you the highest precision, accuracy and speed - and all this with a pleasant price-performance ratio. Due to the structure with a high solid steel base frame approx. 4 t, a high static rigidity of the machine is achieved, so that the processing of solid wood and different metals is possible without any problems. The sophisticated position and distribution of the 35mm linear rails and guides and the associated massive portal with its vibration-damping properties characterize our CNC milling machines in particular. All machine components and the servo drive units used are the result of years of development and experience. The powerful servo motors are highly effective and backlash-free with the ball screw from German quality production and thus offer a feedback-free drive to meet even the highest demands. The superior, freely programmable CNC control enables flexible intervention by means of a touchscreen under all production conditions and is standard on our PFEIFER technology skycnc WK series milling machines. With this CNC control you can create your milling data or import CAD/CAM data and then process them independently of a computer. The tool changer (up to 16 tools), the all-aluminum vacuum table, various tool/workpiece cooling solutions, the automatic lubrication system for all axes and other ingenious details round off this milling system. With the PFEIFER technology skycnc WK series you get a reliable and powerful large portal milling system for your applications. Bsdebnpgxopfx Ahmsln On request, we can supply the corresponding CAD / CAM ARTCAM SKYCNC control software: 2.5 / 3D PFEIFER SKYCNC milling & engraving software in German for Windows® operating systems or ArtCAM Pro / ArtCAM Insignia software in German / Russian etc. on request. - Drive system: high-precision ball screw on X and Y axis and Z axis from high-precision German production - Working speed: 15 m/min - xyz working area/travel area: 2050 x 3050 x 220 mm - Table size (vacuum table with milled vacuum tracks): 2000 x 3000 x 30 mm - xyz repeat accuracy: 0.02mm - XYZ Accuracy: 0.01mm - Compatible with Software Type3, ARTCAM, MASTERCAM, FeatureCam, etc. - Formats: ISO standard G-code, FANUC compatible - Addition: Spindle motor / Tool changer / Vacuum table according to customer requirements - Warranty: 1 year - Spindle power: from 5.5kW (other spindle powers optional) - Spindle speed: 6000 - 24000 rpm (depending on requirements) - Spindle mount: BT30 / ER20 (other mounts optional) - Drive: AC SERVO motors on all axes - Tool changer: 4-8 magazine places - PDSP control RTU / MTU (Remote Terminal Unit) - Power input: AC400V±10% 50Hz - Power consumption 10-15 kW (depending on equipment) - Dimensions: 4500 (L) X 3100 (W) x 2500 (H) mm - Weight: 4000kg

Condition: ready for operation (used), * Brand: Svedala * Type: 36/H/MC * Incl.: basic chasis and oil unit. Bjdpfx Aheywmt Sjmjln

Year of construction: 2016, condition: ready for operation (used), Life Technologies Amex 1000 Evos XL Core Digital Microscope Magnifications: 4x, 10x, 20x Dimensions: approx. 410mm x 320mm (D x W) Height: approx. 550mm Year of manufacture: 2016 You are welcome to arrange a viewing. We can organise cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued, provided you have a valid VAT ID number. Sale subject to prior sale. Visit our shop to view more of our listings. The specified company names and trademarks are the property of their respective owners and are used for identification and product description purposes only. Blodpfxoyx A Sme Ahmen Deviations from technical data or errors in the item description may occur and are subject to change.