Used Holzmann Ts 400Z for sale (4,210)

Condition: used, White Type: TS 130 Temperature shock test chamber water-cooled Specification: Temperature range hot chamber +60°C … +220°C Temperature range cold chamber -10°C … -80°C Switch between hot and cold chambers 10 sec. Temperature stability ±1 K Dimensions and other data: External dimensions: Height 1990 mm Width (without and with door hinge) without....approx. 1820 mm with....approx. 1850 mm Depth (without and with test chamber door) without....approx. 900 mm with....approx. 1155 mm Dimensions of the lifting basket (test room) height 450 mm, width 500 mm, depth 600 mm Volume 130 liters Test room load max. 20 kg Test room floor load max. 20 kg Cooling water pressure min. 2 ... max. 6 bar Max. fuse 35 A (plug 32 A CEE) Hfjdpfovwckhsx Ab Njg Sound pressure level, 1 m in front of the device approx. 65 dB(A) Water-cooled cooling cascade Connection values: 3/N/PE/AC 400V ±10% 50Hz /14.0 kW Rated current 26.0 A Refrigerant R 404A / R23 Weight: approx. 950 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) More We will be happy to answer any questions you may have over the phone.

Condition: used, CTS Type: TS -70/600-13 Temperature test chamber, water-cooled Type series: TS -70/600-13 Control system: - 32 bit controller - LCD control panel - Digital display of setpoints and actual values - Numerical input of setpoint values - Error messages in plain text - RS 232 interface - Free switching channels for on-site test material control Test chamber volume: 600 liters Hfjdpfxsvcyawo Ab Neg Test chamber dimensions: Height approx. 730 mm, width approx. 850 mm, depth approx. 830 mm External dimensions: Height approx. 2250 mm, width approx. 1300 mm, depth approx. 2475 mm Temperature range: -70 to +180°C Heating speed: 13 K/min at -40°C to +120°C Cooling speed: 13 K/min at 120°C to -40°C Temperature deviation: ± 0.1K temporal, ± 0.5 K spatial Electrical connection 400/3P/N/PE Nominal power: approx. 27.8 kW Nominal current: approx. 44.1 A Compressor: 4TC-8.2Y/4PC-10.2Y Refrigerant: R-404 A / R-23 Weight: 1350 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), Type: TS -70/1000-10 For sale is a CTS temperature test chamber Model: TS -70/1000-10 Cooling: water-cooled refrigeration unit Compressor has been replaced! Features: - Multi-touch control system - USB and Ethernet interfaces - Cable feedthroughs for test cables: 4 × Ø 125 mm - Safety temperature limiter Applications: - Environmental and longevity tests - Thermal cycling tests (stress screening) - Quality assurance and research & development - Electronics, automotive, materials testing Test chamber volume: 1,000 liters Test chamber dimensions: - Height: approx. 1,000 mm - Width: approx. 860 mm - Depth: approx. 1,100 mm External dimensions: - Height: approx. 1,950 mm - Width: approx. 1,270 mm - Depth: approx. 1,900 mm Temperature range: -70°C to +180°C Temperature deviation: ± 0.3 K over time Temperature change rate: up to approx. 10 K/min Electrical connection: 400V 3/N 50Hz Rated power: approx. 23.1 kW Rated current: approx. 40 A Refrigerant: R404A / R23 Weight: 1,000 kg For your peace of mind as a buyer, please note: The following inspections and services are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if required 3. Leak test with certificate 4. Following successful checks, chambers undergo a documented test run Condition: used Scope of delivery: (See pictures) Hfodpexdi Ezsfx Ab Nog (Specifications and technical data subject to change and errors excepted!) We are happy to answer further questions by phone.

Condition: excellent (used), Weiss Technik TS 60 Thermal Shock Test Chamber / 60 L, –71…+220 °C Water-cooled Item description: For sale is a Weiss Technik TS 60 Thermal Shock Test Chamber. The chamber is ideally suited for rapid temperature cycling tests (e.g., per IEC, MIL-STD, JEDEC) and has been well maintained. Volume & internal dimensions: Test volume: 60 liters Internal basket/test room dimensions (W × D × H): approx. 380 × 430 × 370 mm External dimensions (W × D × H): 895 × 1970 × 1895 mm Temperature ranges & cycling: Hot chamber: +50 °C to +220 °C Hfjdpfx Abexr A R Te Njg Cold chamber: –72 °C to +70 °C Transfer time (basket between both zones): < 10 seconds Heating rate / speed up to 17 °C/min Cooling rate / speed up to 3.7 °C/min In single mode (cold zone only), heating rate: approx. 3.2 °C/min Temperature deviation & uniformity: Temporal deviation (temperature control over time): ± 0.3 to ± 1.0 °C Load / permissible weight & lifting system: Basket/lifting system load capacity: 20 kg maximum load Transfer basket secured by safety grilles on all sides Additional features & equipment: Noise level: approx. 58 dB(A) in operation Control: Touchscreen, RS-232 / USB / Ethernet interfaces Electrical connection: 3/N/PE AC 400 V ±10% 50 Hz Rated power: approx. 8.5 kW Rated current: approx. 25 A On-site protection: 32 A Refrigerants: R-404A / R-23 Weight: 800 kg Important safety information for buyers! The following steps are carried out on our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors reserved!) For further questions, feel free to contact us by phone.

Condition: new, functionality: fully functional, controller model: HSG-X9000, pipe diameter (max.): 273 mm, positioning accuracy: 0.03 mm, workpiece weight (max.): 200 kg, workpiece length (max.): 7,100 mm, Machine is still completely new & in its original packaging! TECHNICAL DETAILS Workpiece Round tube: φ12 - φ273 mm Square tube: 12 × 12 - 200 × 200 mm Rectangular tube (diagonal): ≤273 mm U-profile (per side): ≤180 mm L-profile (per side): ≤180 mm H-profile (per side): ≤180 mm Max. single tube weight: 200 kg Max. manual loading length: 7,100 mm Max. acceleration: 1.2 G Max. rapid traverse: 120 mm/min Hfjdpfx Absw Rqmus Njg Positioning accuracy: ±0.03 mm/m MACHINE DETAILS Laser source: 3 kW Raycus Laser head: HSG Blade CNC control: HSG-X9000 Dimensions: 12,500 × 4,700 × 2,600 mm EQUIPMENT - Loader AL03 - Software: Intelligent Control System, Nesting Software, Tube Splicing Technology, Cutting Line Common Side Function, Intelligent Leapfrog Function

Condition: used, Year of construction: 1994, Technical details: welding current - continuous: 40...400 A Length: 900 mm height: 1200 mm total power requirement: 13,8 kVA weight of the machine approx.: ca. 180 kg space requirements of the machine approx.: B:0,6xL:0,9xH:1,2 m Hodpfx Asu Nwx Uob Nefg MIG MAG Welding device -welding transformator as spare part donor - capacity 40A/15V up to 400A/34V - open circuit voltage -58V - characteristic constant - protection type IP23 - isolation type F - water cooled Circuit board A5 missing! *

Condition: excellent (used), sheet thickness steel (max.): 4 mm, power: 7.5 kW (10.20 HP), overall weight: 4,500 kg, cutting length (max.): 3,000 mm, HACO hydraulic guillotine shears type TS 3m x 4mm Hfsdpfotz Shtex Ab Neg Manual backgauge New 4-cut stainless steel blades

Condition: ready for operation (used), Indramat MAC 071B-0-TS-2-C/095-A-1/S001 permanent magnet three-phase servo motor, serial no. acc. to photo, used, strong traces of use, 100% functional, scope of supply acc. to photos Hfjdpfx Aoi D Ihfsb Nsg

Condition: new, Brinkmann TS 21/300-MV+211 submersible pump SN:0412003832-92658001 ,unused, 100% functional, scope of delivery as per photos Hfedpsur A Uxjfx Ab Nsg

Condition: ready for operation (used), Indramat MAC071B-0-TS-4-C/095-A-1/WI522LV Permanent Magnet Motor , serial no. according to photo , hole spacing of mounting holes: 92 x 92 mm, Ø drive shaft: 19 mm ,used, normal signs of wear, 100% functional, scope of delivery according to photos Hjdpfxji D Ik Ts Ab Nefg

Condition: like new (used), UNDER CONSTRUCTION We are currently in the final stages of a complete overhaul of a fully automatic stationary press. This stationary press is including 2 containers 30m3 equipped with side door Build in: RV 2025 Overhaul work we have carried out: -new floor -new side panel -new guide blocks and guide plates - pressblock overhauled -cylinders fitted with new sleeves -new fork pins -new return filter -new hydraulic hoses Hfodpfxow Uc T Ue Ab Njg -oil renewed

Condition: used, mileage: 474,013 km, first registration: 06/2008, total length: 6,950 mm, total width: 2,450 mm, total height: 2,310 mm, Year of construction: 2008, Equipment: ABS, air conditioning, cruise control, power assisted steering, = Additional Options and Accessories = - Refrigerator = Notes = DAF LF 45 220 L refrigerated truck with STS TK box body and Thermoking TS 500 e refrigeration unit, 6-cylinder engine, 220 HP! 12-tonner Air conditioning Cruise control Hodpfxjwmn N Tj Ab Njfg Engine brake 6-speed manual transmission Multifunction steering wheel VDO radio/CD player Rear axle air suspension Tire size: 245/70 R17.5 Tire tread approx. 8-10 mm Unladen weight: 6,990 kg Payload: 5,000 kg! Wheelbase: 4,900 mm Bodywork: STS refrigerated box Internal dimensions: 6,950 x 2,450 x 2,310 mm (L x W x H) Thermoking TS 500e refrigeration unit (Diesel / Electric - 380 V) BÄR tail lift / standing type BC 1500S2-K2 - German truck! - Very well-maintained condition! - High payload! - TÜV (roadworthiness certificate), emission test, and safety inspection available on request for an additional charge Subject to errors and prior sale = Further Information = Engine displacement: 6,700 cc Damage: none

Condition: used, functionality: fully functional, Year of construction: 2004, Shear: HACO TS 3006 Working length: 3050 mm Capacity regular steel: 6 mm (400 N/mm²) Back gauge length: 750 mm (motorized) Controller: SP 8 Blade clearance: manual Condition of blades: good Minimum cutting angle: 0.5° Maximum cutting angle: 3° Number of hold-downs: 13 Length and number of sheet supports: 8 × 500 mm, 1 × 1000 mm (left stop + measuring bar) Equipped with sheet support device: No Strokes per minute at smallest angle: 10-15 Strokes per minute at largest angle: 6 Working height: 770 mm Motor power: 7.5 KW Total length: approx. 3880 mm Total height: approx. 1700 mm Hjdjxy Illopfx Ab Nefg Total width: 1650 mm Weight: approx. 4500 kg Year of manufacture: 2004 Delivery and installation at your location are of course possible; delivery charges and any additional costs in consultation. Since 2019, we have been the Dutch dealer for HACO press brakes and shears. In addition to selling sheet metalworking machines, we offer a complete package for service, maintenance and repairs.

Condition: like new (used), functionality: fully functional, Year of construction: 2019, HACO TS 2006 in very good condition Working length: 2050 mm Capacity (mild steel): 6 mm (400 N/MM²) Backgauge length: 750 mm Control: SP-9 motorized backgauge with digital readout Blade clearance: manual Condition of blades: good Minimum cutting angle: 0.5° Maximum cutting angle: 3° Hfodpfxoxpm Iqj Ab Nsg Number of hold-downs: 18 Length and number of sheet supports: 5 x 500 mm, 1 x 1500 mm, side stop 1500 mm with ball rollers included Equipped with support system: No Working height: 770 mm Motor power: 7.5 KW Total length: approx. 2800 mm Total height: approx. 1660 mm Total width: 1905 mm Weight: approx. 3500 kg Year of manufacture: 2019 Delivery and installation at your location is possible, with delivery and additional costs to be discussed. Since 2019, we have been the official Dutch dealer for HACO press brakes and guillotine shears. In addition to sheet metal machinery sales, we offer a complete package of services for maintenance and repairs.

Condition: ready for operation (used), WEG W22 motor with Karl Klein DNG 6-25/TS-300°C fan SN: 1612-302113, used, in good condition, fully functional, scope of delivery as per photos. Hodpox Dwinofx Ab Njfg

Condition: good (used), Year of construction: 1988, functionality: fully functional, Tilting Spindle Moulder SAC TS 145 Manufacturer: SAC (Süeri Alfredo SpA) Year of manufacture: 1988 S/N: 8831 Robust spindle moulder with electrically adjustable height and tilt, powerful motor (7.5 kW), multiple speeds, and extensive equipment. Technical specifications: Spindle diameter: 30 mm Spindle stroke (height): approx. 150 mm Tilting range: −5° to +45° Height adjustment: electric, with digital display Tilting adjustment: electric, with digital display Fence adjustment: manual, with scale indicator Spindle speeds: multi-stage – 3,000; 4,500; 6,000; 8,000; 10,000 rpm Motor power: 7.5 kW Motor brake: automatic Extraction ports: 2 × 120 mm Ø (other options also 100–110 mm) Single-sided table extensions right side: roller/tenoning table/extra accessories with workpiece clamp and end stop ruler, angle adjustable Dimensions & weight Table size: approx. 1,200 × 820 mm Hodpswt A Dxjfx Ab Njfg Overall dimensions approx.: 2,200–2,400 mm (L) × 1,100–1,400 mm (W) × approx. 1,500 mm (H) Weight: approx. 1,100 kg

Condition: excellent (used), Rittal TS 8806.500 Enclosure Hodpfjxl Td Rsx Ab Nofg Rittal Standard Enclosure TS 8806.500 Lighting PS 4155100 220 x 80 x 60 cm (H x W x D) Powder-coated Air Conditioning Unit Rittal SK 3304500 EAN: 4028177251038 Further enclosures in other sizes – new and used – can be found in our shop! International shipping costs upon request!

Year of construction: 2019, condition: as good as new (ex-display), Quiet running, maintenance-free motor Laterally closed protective hoods Stable, adjustable workpiece supports High safety comfort due to adjustable spark deflectors Suitable for grinding, deburring and sharpening all kinds of tools, metal profiles, etc. Motor circuit breaker and undervoltage release Spark/eye protection on both sides Connection cable with CEE plug 16 A 1 grinding wheel each coarse and fine Hfjdpfx Abeiiyq Ho Njg Also other models available from stock! Inquire about the current stock.

Year of construction: 2017, condition: as good as new (ex-display), Quiet running, maintenance-free motor Laterally closed protective hoods Stable, adjustable workpiece supports High safety comfort due to adjustable spark deflectors Suitable for grinding, deburring and sharpening all kinds of tools, metal profiles, etc. Motor circuit breaker and undervoltage release Spark/eye protection on both sides Hfedpfx Ajiiyr Ssb Nog Connection cable with CEE plug 16 A 1 grinding wheel each coarse and fine Machine stand, emergency stop pushbutton and brake, and suction unit

Condition: used, Year of construction: 1984, plate width 3100 mm plate thickness 6 mm distance between columns 3150 mm no. of strokes 20 - 75 Hub/min cutting angle 0,5 - 1,25 ° down holder 16 Stück voltage 380 V frequency 50 Hz power capacity 10 kW weight of the machine ca. 6 t dimensions of the machine ca. 4,0 x 2,1 x 1,7 m Hjdpfx Abstv Ihqj Nsfg with electr. back stop, 950 mm

Condition: excellent (used), Properties Used belt of the manufacturer Transnorm Technical data: Dimensions of the belt Specification No.: U1009424-V0091 Nominal radius/inner radius: 600 mm Hjdpfx Ajd Icwhjb Njfg Nominal width: 900 mm Nominal angle/angle of inclination: 180 degrees Belt type: KT96 Delivery height difference: 500 mm Belt Conveyor In the order picking zone, the belt is ideal for interlocking machines or workstations and optimising internal processes. During transport, the belt conveyor can convey sensitive and differently sized containers, boxes or other packaging and article units to the feeding or discharge point and also serves, for example, as a connecting line in front of or between production and processing machines. In addition, it enables efficient parts transport in the factory and warehouse and is used to transport considerable quantities and distances.

Condition: good (used), Year of construction: 1998, Features: Used belt conveyor curve 45 ° transnorm left Condition: Fully functional with traces of use Ideal for fast material transport Professionally dismantled and packed Incl. motor and side guide Feet to be ordered separately Colour: white 1 pc in stock Technical data: Mass of the belt conveyor curve 45°. Nominal width approx.: 800 mm Curve angle: approx. 45° degrees Inner radius: 900 mm Belt type: KT 94 Hjdpfx Abjdr H Hke Nsfg Belt conveyor curve Due to the excellent workmanship of the belt conveyor curve, your material glides smoothly to its destination, even under high load. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading your goods, we are your competent partner! We will be pleased to make you an individual offer or advise you on conception or assembly questions. Simply let us know your requirements and the local conditions. Take advantage of our many years of experience and our excellent network of specialists. For companies in a wide range of industries, such as : Logistics, pharmaceutical industry, trade or the electronics industry, we have already successfully implemented projects. Together we will work out ways to optimize your process and material flow in a cost-effective and sustainable way. We can even offer you fully automatic sorting technology or supplementary components such as picking shelves or containers.

Condition: like new (used), Features Used belt from the manufacturer Transnorm Technical data: Belt dimensions Hedpfx Asd Icwmjb Nsfg Specification no.: U1009424-V0520 Nominal radius/inner radius: 600 mm Nominal width: 900 mm Nominal angle/pitch: 180 degrees Belt type: KT96 Belt conveyor The belt conveyor is ideally suited in the order picking zone to interlock machines or workstations and to optimize the internal process. During transport, the belt conveyor can convey sensitive and differently sized containers, boxes or other packaging and article units to the loading or delivery point and also serves, for example, as a connecting route in front of or between production and processing machines. In addition, it enables efficient parts transport in the factory and warehouse and is used to convey considerable conveying quantities and distances.

Year of construction: 2019, condition: used, Empty weight: 853 kg CE mark: yes General condition: good Technical condition: good Visual appearance: good Delivery terms: EXW Transport dimensions (LxWxH): 120x134x270 Production country: IT Please contact Christian Theißen for more information Manufacturer Trime Type X-TS 4x150 LED Year 2019 Usage data: Hedpfx Abov Tkmpe Nefg Power 0,6 kVA lamp type LED Illuminated area 2.000 m2 Light output 61.000 lumens Max. height 8,30 m required connection - built-in Generator 4,2 kVA / 230V / Battery Tank capacity 42 liters Drive type Hybrid Luminous life with one full tank 182 hours Operating noise 85 dBA (79 LWA in dB) Transport dimensions LxHxW 1,20 x 1,34 x 2,70 m Dimensions when set up 2,35 x 2,54 x 8,30 m Own weight 853 kg Location: 41468 Neuss immediately available

Condition: used, Year of construction: 1983, Max. cutting length: 3,000 mm Max. sheet thickness: 8 mm steel Motorized back stop with fine adjustment via handwheel up to 1000 mm cutting length limitation Hfjdpfx Aer D Tnwjb Neg knife sharpened Weight: 6,800 kg