Used Htb Hamburger Transformatorenbau Transformer 15 Kw for sale (47,109)

Condition: repair required (used), HAMECH TKS 400 CIRCULAR SAW – FOR PARTS For sale: a Polish-made HAMECH TKS 400 circular saw. The machine is sold FOR PARTS / FOR REPAIR – it is incomplete. MISSING THE SAW LIFTING / ADJUSTMENT MECHANISM. Sold in the condition shown in the photos. DATA FROM THE NAMEPLATE: Gsdpfxoz Hrgqo Afusbu • Manufacturer: HAMECH • Forest Machinery Industry Plant • Type: TKS 400 • Year of manufacture: 1990 • Serial number: 536 • Voltage: 380 V • Motor power: 5.5 kW • Frequency: 50 Hz The saw has a solid, heavy-duty construction and a large work table. The machine can be used as a basis for repair or as a source of spare parts. PLEASE NOTE: • Missing saw lifting mechanism • Machine is incomplete • Not sold as ready for operation • Technical condition has not been thoroughly checked • Visible signs of years of use • Paint loss and surface corrosion • Sold in the condition shown in the photos For the TKS 400 model, configurations with a main blade up to 400 mm, a 5.5 kW motor, and adjustment of the blade position up/down and at an angle are common. The parameters of individual TKS 400 versions may vary. The machine is sold as INCOMPLETE – FOR PARTS / FOR REPAIR. Possible to inspect before purchase. Collection in person.

Condition: used, mileage: 125,000 km, power: 206 kW (280.08 HP), first registration: 03/2009, fuel type: diesel, overall weight: 15,000 kg, axle configuration: 2 axles, brakes: retarder, color: grey, gearing type: automatic, emission class: euro5, Equipment: ABS, air conditioning, compressor, navigation system, parking heater, MAN 15 280 Horse Truck, 5 Horse Capacity, Pop-Out Gbjdpfez Hta Eex Afusu Private sale, VAT not included. * 5 sleeping berths * Leather seating area with table, convertible into a sleeping area * Sleeper cab above the driver's cab * Additional bed above the bathroom * Automatic climate control * Webasto auxiliary heater * Dometic diesel generator * 300-liter fresh water tank * Large hot water boiler * High-quality kitchen with granite countertop * Refrigerator and microwave * Large bathroom with shower, sink, and toilet * TV and sound system * Numerous storage and wardrobe compartments Horse compartment for 4-5 horses * Padded, adjustable aluminum partitions * Soft rubber flooring * Feed trough * 2 electric roof vents * Electric fan * Opening windows * Video surveillance * Interior lighting * Ceiling storage * Direct access to the living area Exterior & Storage * Rear and side ramp with ramp limiters * Large lockable storage compartments * Separate tack room * Horse shower * Show box included in the purchase price Errors/input errors and prior sale reserved. * NET PRICE POSSIBLE. * Top leasing offers Location and viewing of our vehicles: STX HORSETRUCKS GERMANY Hamburgerstrasse 65 23816 Leezen Sales and service for all brands in the field of horse trucks and trailers. Please arrange an appointment in advance. Contact: Richard Theurer and Andreas Theurer

Condition: used, Year of construction: 2022, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, König Combiline KCL 6 / 800 mm with WK-RR and Donut station – 2022 Automatic König Combiline line for the production of small breads and shaped products, equipped with a Classic Rex Futura, a WK-RR shaping station, and an original König Donut station. Features: – Manufacturer: König – Model: Combiline KCL 6 – Year: 2022 – Working width: 800 mm – Dividing and rounding head: Classic Rex Futura – Type: Futura T5/4/3S – Drums: SK51 + SK65 – Weight range: 22 to 115 g – Operation in 3 / 4 / 5 rows – Maximum capacity: up to 7,500 pieces/hour – Control via touchscreen with programmable settings Line composition: – König Classic Rex Futura, divider-rounder – Pre-elongator Gjdpfx Ajz I U Tcjfuebu – Proving chamber / pre-fermentation – Shaping station with WK-RR coiler – Moistening and seeding system – Automatic depositing system – Donut cutting / stamping station The WK-RR station allows, in particular, the processing of elongated and coiled products and significantly increases the versatility of the line. The Combiline enables the production of a wide range of products: – Round small breads – Hamburger buns – Hot dog buns – Elongated small breads – Flattened products – Coiled products – Various shaped products – Donuts König Donut station: – Width: 800 mm – Bottom-side center cutting – Centering device for precise cutting – Automatic removal of cut dough – Stainless steel construction Condition: Line in very good condition and always well-maintained. It is currently still installed in a bakery in the UK and can be viewed before dismantling. Dismantling is scheduled soon, and the line will then be available in our warehouse in Belgium. Video available upon request.

Condition: new, Year of construction: 2023, 23 heat pump sets, LG (heat pump, water storage tank with heat pump, auxiliary heater, and accessories) from a cancelled construction project, 5.5 kW – New: Price per set: now only €3,600.00 instead of €5,990.00 (net) incl. delivery in Germany! Manufacturer: LG Type: LG Monobloc S, R32 5.5 kW LG hot water heat pump, 200L LG auxiliary heater 3 kW, 1 phase LG extension cable for Wi-Fi module, 10 meters LG outdoor air connection kit PHDCLA0 LG Wi-Fi module with LG ThinQ Year of manufacture: 2023 Gbodpoz I Ek Ejfx Afusu Condition: New Available: immediately Detailed description available upon request as a PDF via email!

Condition: new, Year of construction: 2023, 18 heat pump sets, LG (heat pump, water tank with heat pump, auxiliary heater, and accessories) from a cancelled construction project, 7.0 kW – New: Price per set: now only €3,770 instead of €6,290 (net) including delivery in Germany! Manufacturer: LG Type: LG Monobloc S, R32 7 kW LG hot water heat pump, 200L LG auxiliary heater 3 kW, 1 phase LG extension cable for Wi-Fi module, 10 meters LG outdoor air connection kit PHDCLA0 LG Wi-Fi module with LG ThinQ Year of manufacture: 2023 Condition: New Available: immediately Gbedpfx Afoz I Elijuou Detailed description available on request as a PDF via email!

Condition: good (used), Year of construction: 2017, operating hours: 877 h, empty load weight: 7,300 kg, fuel type: diesel, ATN CX 15 Scissor Lift / Work Platform / Scissor Lift 15m working height, Kubota Diesel, 2017 A video can be sent via WhatsApp. We have a continuous stock; please see our website. Prices are quoted ex-works Nuland. Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are offered at trade prices in AS-IS condition without any warranties (see our general terms and conditions). You can arrange a non-binding appointment for a viewing and/or test drive. Gbjdpfxjz H Ubde Afueu Please call in advance as we are not always on site. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: good (used), Radial fan, dust extraction blower, fan, extraction, dust blower, blower, exhaust fan Gbodpfxjz Hwcwe Afuju -Radial fan: Extraction blower, explosion-proof fan -Engine: VEM 3.6 kW 1430 rpm -Volume flow rate: m³/h -Inlet connection: Ø 420 mm -Outlet connection: Ø 450 mm -Fan wheel: Ø 660 x 250 mm -Overall dimensions: 1500/900/H1180 mm -Weight: 180 kg

Condition: used, EFCO Glass Tempering System 750 °C Thermal glass tempering system for the production of single-pane safety glass / tempered glass For sale is a professional, industrial glass tempering system from the renowned British manufacturer EFCO Furnaces Ltd. The system is ideally suited for the thermal tempering of flat glass for the production of single-pane safety glass (tempered glass). System Components & Structure Oven inlet & roller conveyor: The horizontal roller conveyor automatically transports the glass panes through the safety gate into the enclosed heating chamber (oven). Cooling system / fans: Powerful radial fans (blowers). These are essential for the thermal tempering process, in which the heated glass is rapidly cooled with air (“quenched”) to create the necessary surface tension. Gbodpfez Hm Ipox Afuju Outlet & quenching area: A precise roller conveyor with ceramic or special rollers, on which the glass is held flat and transported during the cooling process. Control & electronics: A central main control cabinet with PC visualization for monitoring the temperature zones, as well as separate operator terminals with analog pressure and temperature displays (e.g., for the air pressure of the fans). Technical data: Manufacturer: EFCO Furnaces Ltd. Type: Glass Temperer (Glass Tempering System) Maximum temperature: 750 °C Rated power: 220 kW Heating zones: 10 separately controllable zones (for precise temperature profiles) Connection voltage: 380 volts Number of phases: 3 phases Mains frequency: 50 Hz Reference number: 427206 Year of manufacture: 2001 Conformity marking: CE certified Dimensions (L x W x H): 16.80 m x 2.80 m (width up to fan connection) x 2.25 m Complete set of spare ceramic rollers: A full, unused/new set of high-quality transport rollers (Fused Silica Rollers) with a new value of over €10,000 for the oven area. Item location: 32278 Kirchlengern Dismantling until the end of October Dismantling & transport: Option 1: The dismantling, loading, and transport will be completely organized and carried out by the buyer (collection from the location). Option 2: Dismantling service by us: Alternatively, we offer to have our team professionally dismantle the complete system. Surcharge: €5,000 net "All from one source: We would be happy to offer you suitable bank financing for your project." More items - new and used - can be found in our shop! International shipping costs on request!

Condition: ready for operation (used), Year of construction: 1994, operating hours: 1,620 h, functionality: fully functional, machine/vehicle number: 00676/1, rotational speed (max.): 2,880 rpm, type of input current: three-phase, pressing: 16,000 Pa, input voltage: 380 V, power: 7.5 kW (10.20 HP), input frequency: 50 Hz, input current: 14 A, Gray machine, used very little, but tested. Gbsdpfxjz Ig N Ae Afuou Identical model in red, but older, tested, runs perfectly, price negotiable. Other high-pressure fans with lower capacity are available, all tested, prices negotiable.

Condition: used, VÖTSCH Industrial drying cabinet / chamber dryer / chamber drying oven Vötsch VTL 75/100 Industrial convection drying cabinet up to 250 °C with 562 liters of usable volume. For sale is a used industrial drying cabinet from the manufacturer Vötsch Industrietechnik GmbH, model VTL 75/100. The VTL 75/100 is an electrically heated chamber dryer for industrial drying, heating, and tempering processes. The VTL series is designed for drying processes with controlled exhaust air extraction and takes into account the safety requirements of EN 1539. The unit features a spacious drying chamber with removable grid shelves, an insulated door with an all-round seal, and a control and operating unit located on the side. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Type: VTL 75/100 Equipment type: Industrial drying cabinet / chamber dryer Rated temperature: 250 °C Rated voltage: 3/N/PE AC 400 V ±10 %, 50 Hz Connected load: 20 kW Rated power: 18 kW Rated current: 29.0 A Usable volume: 0.562 m³ / 562 liters Steam chamber volume: 0.998 m³ Minimum exhaust air volume flow: 240 m³/h Internal dimensions according to manufacturer: Godpfxjz N Am Io Afusbu Width: approx. 750 mm Height: approx. 1,000 mm Depth: approx. 750 mm External dimensions according to manufacturer: Width: approx. 1,470 mm Height: approx. 1,900 mm Depth: approx. 1,210 mm Empty weight: approx. 475 kg The external dimensions and weight are the manufacturer's specifications for the model size VTL 75/100. Deviations are possible due to the specific equipment. Equipment: Electrical heating Convection system with fan Exhaust system with fan and air duct JUMO dTRON 304 temperature controller Additional digital display and operating unit Several removable grid shelves Insulated drying chamber Single-wing door with all-round seal Side control cabinet with operating elements Main switch and indicator lights Electrical control and switching components Areas of application: Industrial drying processes Drying of coatings and paints Heating and tempering of components Material testing and heat treatment Production and manufacturing processes Research and development Scope of delivery: 1 × Vötsch VTL 75/100 industrial drying cabinet Grid shelves as shown in the pictures Other equipment as shown in the pictures Condition: Used Optical condition as shown in the pictures Signs of wear and tear are present Shipping via freight forwarder possible by arrangement. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: good (used), Year of construction: 1991, Used Darley press brake Type EHP 50 20 15 Capacity 2050 x 50 tons Gjdpfx Afez N Exgjuobu Delem control system Y1, Y2, and X-axis CNC Includes a set of tooling

Condition: used, overall weight: 350 kg, total length: 1,200 mm, total width: 800 mm, total height: 1,200 mm, power: 15 kW (20.39 HP), volume flow: 120 m³/h, noise level: 65 dB, final compaction pressure: 10 bar, Equipment: documentation/manual, type plate available, No. 04499 Screw compressor Schneider AirMaster AM K 15-10 Used Motor power 15 kW Max. discharge pressure 10 bar Air delivery 2000 l/min (120 m3/h) at 9 bar operating pressure Sound pressure level 65 dB(A) Power supply 400 V / 50 Hz / 3-phase Gsdpfxsz N Ixio Afuebu Electronic control AIRBASIC 2 Technical documentation available Transport dimensions approx. 1200 x 800 x 1200 mm LWH Weight approx. 350 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: used, machine/vehicle number: K11739, Rotor diameter: 150 mm Rotor width: 200 mm Rotor blades: 3 rows Stator blades: 2 rows Inlet cross-section: approx. 300 x 200 mm Drive motor: 2.2 kW Gedpoz N Iyaefx Afuebu

Condition: new, functionality: fully functional, machine/vehicle number: P49084, operating hours: 1 h, load capacity: 1,500 kg, drive type: Lithium-Ionen, Reach truck Chassis number: P49084 Load center: 500 Condition: New Technical condition: New Front tire type: Vulkollan Front tire condition: New Rear tire type: Vulkollan Gbjdpfoz N I Nbsx Afueu Rear tire condition: New Battery voltage: 24V Battery manufacturer: Linde Battery type: Lithium-ion Battery condition: New

Condition: excellent (used), Year of construction: 2017, Haas ST 15 Godoz I Ryljpfx Afusbu Year of manufacture: 2017 RPM: 3500 Tool setter Tailstock Chip conveyor Video available!

Condition: new, 2 tyres 15/55/17    • Equipped with 8-hole rim    • Tyre width 390 mm    • Tyre height 850 mm    • Load capacity per tyre 3000 kg Gbjdpfxez Rxtye Afusu Condition: New

Condition: good (used), Three-phase motor with 2 speeds, electric motor -Power: 4/6 kW -Speed: 720/1440 rpm Gbodod S Spdepfx Afusu -Shaft: Ø 38 x 80 mm -Design: B5 -Protection class: IP 55 -Outer flange: Ø 300 mm -Recess: Ø 230 -Dimensions: 510/300/H350 mm -Weight: 77.5 kg

Condition: good (used), Year of construction: 1999, 4 SIDE BRUSH SANDER Conveyer belt with adjusteble speed Configuration : top/buttom/Left/right Maximum working width/hight : 150 x 100 mm 2 x driven roller before and after left/right heads Gbedpsz R D Dwsfx Afusu 2 x brand new conveyer belts included

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 1 h, new KAESER SXC8 screw compressor system (10 bar) available immediately with integrated refrigeration dryer with 215 liter compressed air tank with electrically level-controlled condensate drain with Sigma Control 3 control Year of construction: 2026 Operating hours: 0.5 operating hours Technical data: Volume flow at 10 bar: 0.68 m³ / min Nominal power drive motor: 5.5 kW Electrical supply: 400 V / 3 ph / 50 Hz Dimensions W x D x H in mm: 620 x 980 x 1480 Weight: 300 kg Compressed air tank: 215 liters Compressed air connection: G 3/4 " Sound pressure level: 69 dB (A) Refrigeration dryer pressure dew point: 6 ° C Visit our store. We always have a large selection of new and used compressors in stock! Available immediately. Godpfehhiw Njx Afujbu

Year of construction: 1999, condition: excellent (used), Oil burner Weishaupt L1Z-B Model: D Output: 71 kW - 415 kW Year of manufacture: 1999 We also speak Russian! Please arrange an inspection by phone in advance. We prefer to sell to dealers, businesses, or for export. Gsdpfx Afei Akrrjuebu All information is subject to change without notice and is provided without warranty. The seller assumes no liability for typographical errors or data transmission errors. We will gladly purchase your used boiler or burner! Of course, we will also handle all formalities. Loading is possible.

Condition: new, Year of construction: 2025, Laser source: 3kW Raycus Laser head: Raytools autofocus Control system: FSCUT 5000 A Loading of pipes up to 6400 mm long, unloading up to 4000 mm Positioning accuracy: ±0.05/1000 mm Acceleration: 1 m/s² Rotational speed: 120 rpm Gbodpsi Arwljfx Afusu Max. positioning speed: 100 m/min Max. weight of a pipe: 250 kg Pipe diameter: 15-230 mm Overall machine size: 12728 × 3400 × 2450 mm

Condition: new, Year of construction: 2026, Miter saw and cut-off saw, type: ZS 200 N - 5 KW motor with machine stand, but without saw blade Machine operated via handwheel and worm gear (rear) Tilting Gedpfxoi Dfido Afuebu Saw blade diameter: 520 mm, saw blade arbor bore: 50 mm Saw blade speed: 2800 rpm 400 volts / 5 KW (S6/40%) motor with brake and automatic star-delta motor switching Cutting width at 90 degrees: 420 mm Cutting width at 45 degrees: when tilted: 295 mm Cutting height at 90 degrees: 200 mm Cutting height at 45 degrees when tilted: 140 mm The saw can be tilted to an acute angle of approximately 25 degrees on one side and tilted flat to the left up to 30 degrees. Machine weight: approx. 250 kg Location: Available from stock in 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, laser power: 3,000 W, table length: 3050 mm table width: 1530 mm laser head: ( SWISS RAYTOOLS ) autofocus laser capacity: 3kW overall dimensions: 5000 x 2250 x 2000 mm weight of the machine ca.: 3.300 kg Furnishing: - Max-photonics Laser source 3kW - CYPCUT (full option, no extra control option cost) - High integrated, simple operation, leading technology - Ray-tools autofocus cutting head - CYPCUT - CAD / CAM software include: - Nestling, With leapfrog, Edge seeking, Fly cutting, ETC - 18,5" screen, keyboard, control panel - central Lubrication system Cutting capacities: - normal steel:10 mm - stainless steel: 5 mm Gjdoix Nkbepfx Afusbu - aluminium: 5 mm - brass: 4 mm - copper: 3 mm Axes: - Machine axes: 3 axes (X, Y, Z,) - X-axis travel: 1500 mm - Y-axis travel : 3000 mm - Z-axis travel: 120 mm - Axis speed max X / Y: 80 m/min - Positioning accuracy:: +/- 0.05 m - Reputability accuracy :+/- 0.03 mm - Acceleration max. :0.8 G - automatic change, max load on tables: 500 kg. assisting gasess: - mild steel - oxygen (0.5 - 25 bar) - stainless steel - nitrogen (0.5 - 25 bar) - Aluminium - compressed air or nitrogen (0.5 - 25 bar) including: - Compatible suction system cap 3 Kw - Spare part basic supply package - cutting from reflective sheet metal materials - part trolly under work table for collecting small parts - Machines for cutting thin sheets - axes equipped with Japanese servo motors YASKAWA - Servo motors reach up to 80 m/min. - Accelerations up to 0.8 G - Fiber laser is the green laser technology for the future - (Saving of at least 50% energy costs) - Components / therefore very low-maintenance - Save up to 50% per part through more efficient production - In addition, precise cuts and smooth surface quality - Heavy-duty constructed frame, - equipped with world-famous, durable, high-quality components We use the most high quality parts Like: -- Yaskawa servo drives -- Hiwin linear rails -- Tongfei water chiller dual use for source and laser head -- Auto central lubrication -- Touch screen 23 inch -- For providing quickly service, we add WIFI function for our technician operates troubleshooting and adjust parameters remotely -- YYC/APEX rack and pinion -- standard delivery is with power transformer and stabilizer total power requirement 20 kW -- TBI high precision ball screw for Z axis -- saw tooth blade table -- air and gas pressure real time monitoring on screen -- CE declaration -- warranty 2 year, max 3600 hours Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania. Official Dealer CNC Top Ten b.v. Coevorden Holland

Condition: new, Year of construction: 2024, Fiber laser cutting machine FLV-3015-OT-6022 3kW / VF1530-3000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 60000mm/min - Maximum acceleration: 0.7G - Maximum load: 1200kg - Nominal power: 3.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 20.0mm, maximum thickness 22.0mm - Stainless steel: Recommended thickness 8.0mm, maximum thickness 10.0mm - Aluminum: Recommended thickness 6.0mm, maximum thickness 8.0mm - Brass: recommended thickness 5.0mm, maximum thickness 6.0mm Structure parts The machine is very stable thanks to its welded construction based on massive legs. The high speed of head movements while maintaining high precision is ensured by Japanese Fuji servo motors. Rotary table for hollow tubes The machine is equipped with a rotary table for positioning the profile in relation to the laser head. - Maximum length of machined tube: 6000mm - Diameter of profile holder: 220mm ABLS - automatically replenishes grease in guides. RayTools cutting head with autofocus Gsdpjh Hfldefx Afusbu Optional extra - Otinus Protect to guarantee your peace of mind This product ensures protection for the source of your laser. With this service you will ensure that the continuity of your business is protected. We will secure your business so that you can complete your orders on schedule. Optional extra - Voltage stabilizer Control panel Operation of the fiber laser cutter is run by the control panel, which consists of a screen, mouse and keyboard. The computer runs Windows 10 and CypCut software. All installed software has lifetime licenses. Wireless controller included. Assistance by a specialist We are committed to staying in continuous contact with our customers; therefore, we meet this challenge by offering a time-package of hours to be used for the Otinus Professional Assistance to each machine purchased. Otinus Academy By purchasing this machine you will gain a year's access to online courses that will allow you to effortlessly train a new employee or refresh your knowledge from training! Free package of drawings Each Otinus laser cutter comes with a comprehensive, ready-to-use CAD drawing package. Technical consulting We have specialists who, before the purchase, will select the right machine and accessories based on technical drawings of the parts you plan to make. Price-included 3-day training along with machine installation - 2 days (up to 8 hours) – machine commissioning and controller usage training - 3rd day (up to 8 hours) – work under the supervision of our technician – the possibility of programming specific parts that are manufactured at your site Consultation with a specialist - Telephone: 7.30 a.m. to 9 p.m. (Mon-Sat) - time package of 8 hours to be used within 12 months. Online: from 7.30 a.m. to 2.30 p.m. (Mon-Fri) - time package of 8 hours to be used within 12 months. Access to Otinus Academy courses - LibreCad - 12-month access In addition, you will receive - CAD drawing package

Condition: new, Year of construction: 2024, Fiber laser cutting machine FLV-3015-C2 6kW / VF1530-6000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 120000mm/min - Maximum acceleration: 1.5G - Nominal power: 6.0kW - Energy requirements: 40.0kW - Source brand: Raycus or MAX Photonics (You can choose) - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 25.0mm, maximum thickness 30.0mm - Stainless steel: Recommended thickness 16.0mm, maximum thickness 20.0mm - Aluminum: Recommended thickness 12.0mm, maximum thickness 14.0mm Structure parts The machine is very stable thanks to its welded construction based on massive legs. The high speed of head movements while maintaining high precision is ensured by Japanese Fuji servo motors. ABLS - automatically replenishes grease in guides. RayTools cutting head with autofocus Optional extra - Otinus Protect to guarantee your peace of mind This product ensures protection for the source of your laser. With this service you will ensure that the continuity of your business is protected. We will secure your business so that you can complete your orders on schedule. Optional extra - Voltage stabilizer Control panel Operation of the fiber laser cutter is run by the control panel, which consists of a screen, mouse and keyboard. The computer runs Windows 10 and CypCut software. All installed software has lifetime licenses. Wireless controller included. Assistance by a specialist We are committed to staying in continuous contact with our customers; therefore, we meet this challenge by offering a time-package of hours to be used for the Otinus Professional Assistance to each machine purchased. Otinus Academy Gsdpfsh Hfphsx Afujbu By purchasing this machine you will gain a year's access to online courses that will allow you to effortlessly train a new employee or refresh your knowledge from training! Technical consulting We have specialists who, before the purchase, will select the right machine and accessories based on technical drawings of the parts you plan to make. Price-included 3-day training including installation of the machine - 1 day up to 8 hours - installation of the machine and learning to use the controller. - 2 days up to 8 hours - independent work under the supervision of our technician - possibility of programming specific details that are made by the Client. Consultation with a specialist - Telephone: 7.30 a.m. to 9 p.m. (Mon-Sat) - time package of 8 hours to be used within 12 months. Online: from 7.30 a.m. to 2.30 p.m. (Mon-Fri) - time package of 8 hours to be used within 12 months. Access to Otinus Academy courses - LibreCad - 12-month access In addition, you will receive - CAD drawing package