Used Huber Rod 1500 for sale (7,724)

Condition: used, Year of construction: 2002, grinding diameter 450 mm grinding length 1500 mm centre height 225 mm Control FAGOR EQUIPEMENT - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - T6: HF Fischer spindle MFV or MFZ 1224/1242/1260 - T7: HF Fischer spindle MFV or MFZ 1224/1242/1260 - Marposs tool measurement - active longitudinal positioning - Elaso GAP-control on T1 and T2 contactless integrated in the control surface - Elaso GAP internal grinding with fluid sensor for T6 and T7 - semi-automatic balancing by Elaso integrated in the control surface for T1/T2 - tailstock hydraulic with fine adjustment +/- 150 microns - dresser on workpiece spindle side table mounted - dresser on tailstock side table mounted - dresser on upper table - new service- and userfriendly housing SPECIAL EQUPEMENT: Workhead with direct drive - strongly recommended for non-circular grinding - workpiece weight flying max. 75kg - workpiece weight between centres 150kg - water-cooled B-axis with direct drive - center height 225 mm - extremely torsionally stiff - highly accurate positioning - resolution ° - water-cooled Hydrostatic ball screw - x-axis - wear-free, as there is no contact during operation - no loss of precision, even during long-term use at full load and maximum speed - no friction at low speeds - no friction force backlash when the direction of rotation changes - translates even the smallest rotational movements - no stick-slip effect even at low speeds - no fluctuations in frictional torque due to ball circulation - higher axial stiffness compared to ball screws - significant improvement in damping, resulting in better workpiece surface finish and tool life - no oscillations due to ball circulation - also suitable for high speeds and accelerations - cost-effective alternative to the linear motor with greater precision and significantly lower heat generation - significantly less power dissipation and, as a result, no problems with swarf on permanent magnets Ljdjuxfu Nopfx Aa Rorr New hydraulic unit - optimized temperature control (chiller) - Energy-saving Only one pump controlled by VFD - Pressure monitoring - monitoring of the hydrostatic oil for water content. (Damage to the bellows is recognised and detected prematurely) -fine adjustment +/- 150 microns Paper belt filter 375l – alternative 480l Grinding mist extraction system – emulsion MECHANICAL OVERHAUL -complete machine according to Kellenberger protocoll -new painting ELECTRICAL OVERHAUL - new modern Fagor CNC with BEMA HMI - new electric cabinet - new digital drive technology - replacement of all electrical cables, switches etc. - new absolute external scales in x- and z-axis - new absolute encoder (B-axis) Grinding software BEMA-Standard: - workpiece zeroing - grinding wheel zeroing - dressing diamond measuring - corrections - external and internal surface grinding - external and internal angle grinding (turning of the b-axis, dressing with straight wheel) - external and internal radius grinding (radius dressed on wheel) - semi-automatic traverse grinding - workpiece zeroing - 2 dressing diamonds - 1 dressing blade - dressing roll - 3 flat dresser - corrections - Z-position measurement - GAP control Optional grinding cycles at no extra charge: Profile plunge grinding: - external and internal profile plunge grinding with profile wheel Pr...

Condition: used, Year of construction: 2004, machine/vehicle number: 2177/03/9604014, Press capacity: 160 ton Ram stroke adjustable: 20 - 130 mm Slide adjustment: 100 mm Daylight: 560 mm Table surface area : 1500 x 800 mm Slide area: 1400 x 800 mm Number of strokes: 20 - 60 s.p.m. Distance between the columns F - B: 520 mm Height over floor approx.: 3550 mm Required power: 48 kW Weight of machine approx.: 26 ton Standard configuration Control system SIEMENS S7 Extended machine accessories Lsdpfxeuqdzdj Aa Rorr Automation PME feeding unit consisting of decoiler and feed / straightening unitDecoilerLoad capacity 2 tStrip width 400 mmMaterial thickness 0.5 - 4.5 mmCoil outer diameter 1800 mmSpreading range 470 - 630 mmHydraulic expansion of the spreadHydraulic pressure armElectronic feed / straightening unitMax. strip width 400 mmMax. material passage 410 mmMaterial thickness 0.5 - 4.5 mmCross-section 1200 mm²Number of straightening rollers 7Straightening roller diameter 80 mmNumber of feed rollers 2Pneumatic lifting of feed rollersFeed speed 50 m/minFeed length 0 - 10 m

Condition: used, Year of construction: 1989, sheet thickness: 8driving power: 18,5weight approx.: 5800messurements (LxWxH): 2130 x 3260 x 2360sheet length: 1550Technical Data: Max. cutting length: 1,550 mm Throat depth (side clearance in frame): 50 mm Sheet passage: 16 mm Cutting angle adjustable: 0.5° – 2°30′ Strokes per minute: 25 – 32 Number of hold-downs: 8 Cutting pressure: 280 bar Oil capacity: 300 liters Total connected load: 20.1 kW Ledsvaatlspfx Aa Rsrr Overall dimensions (L × W × H): 2,130 × 3,260 × 2,360 mm Equipment: CNC control SIEMENS S5 for numerical sheet metal backgauge control Sheet support device with motorized scrap separator Sheet discharge with conveyor belt Blade clearance and cutting angle programmable via control Spare blades included Shear blades suitable for material up to 750 N/mm² tensile strength Separate hold-down operation for cutting along marked lines Hold-down pressure adjustable and readable from the front 2 swing-away backgauges Finger guard with handle recess Ball rollers integrated in the support table Angle gauge with vernier scale Foot switch Condition:Used, in good condition

Condition: ready for operation (used), Siemens 1FT5064-0AF01-2 - Z AC-VSA-Motor SN:ECO81723301001 + Heidenhain ROD 426 1000 27S12-03 Encoder Id. 295 434-LU SN:10809047A , Z= G51: prepared for encoder system,used, normal signs of wear, 100% functional, scope of delivery as per photos Ljdpsvabkfsfx Aa Rsrr

Condition: used, Technical details: vertical rapid adjustment: z-Achse: 1125 mm horizontal adjustment: x-Achse: 600 (+1000 elektrisch-manuell) mm cross adjustment: Frässupport y-Achse: 325 (340) mm control: Siemens 840D diameter of clamping surface: 3500/5800 mm Ledpfju Idlfox Aa Rerr turning diameter: max.6000 mm range of revolution per miute: Planscheibe: 1 - 12 U/min revolution per minute: Frässpindel: 1000-6000 U/min max. workpiece diameter on pallets: 6000 mm workpiece weight: 10 - 2000 kN tool taper: HSK-A-100 total power requirement: 120 kVA weight of the machine ca.: 35,0 t Annular Ring and Cylinder Machining Center Vertical special CNC machining center application: for turning-drilling and milling, grinding of annular parts (large gears, roller slewing rings, gear rims, special flanges, etc.) machine consists of two separate main groups: column unit and face plate/table unit - Feed drives via AC servomotors - cross adjustment milling support z-axis 325 (max.340) mm - Drive power of the faceplate drive 76 kW - Positioning of the table = 0,02mm What was renewed: - Axle motors were renewed (Siemens) - Central lubrication for large-diameter antifriction bearings of the turntable/spindle has been extended - partly the machine cabling - bladder accumulator and the safety valve i.D. *

Condition: refurbished (used), Year of construction: 2018, ALUMINIUM PRECISION HIGH-SPEED CUT-TO-LENGTH LINE 1500.3.12, made AUXMET Revamped and upgraded 2018 for aluminium. Thickness: 0,4 – 2 mm Coil width: 500 – 1.510 mm Exit sheet length: 500 – 4.000 mm Outer coil diameter: 800 - 1.800 mm Coil weight: 12 Tn N° of straightening rolls: 19 rolls Diameter of leveling rolls: 45 mm Lodpfx Aajvtpdgj Rorr

Condition: new, spindle bore: 105 mm, turning diameter: 500 mm, turning diameter over bed slide: 300 mm, turning length: 1,500 mm, spindle speed (max.): 1,600 rpm, spindle speed (min.): 36 rpm, type of input current: three-phase, overall weight: 2,600 kg, three-jaw chuck diameter: 315 mm, New lathe with large bore. Brand: KMS Type: CS6250C TDC: 1500 mm Turning diameter over bed: Ø 500 mm Turning diameter over slide: Ø 300 mm Turning diameter in pocket: Ø 710 mm Turning length in pocket: 240 mm Bed width: 390 mm Spindle passage: Ø 105 mm Spindle speeds: 12 (36 - 1600 rpm) Lrjdpfx Asvxz R Nja Rjr Tailstock spindle diameter: 75 mm Tailstock range: 150 mm Tailstock mounting: MC5 Machine dimensions: ± 3132 x 975 x 1270 mm (L x W x H) Machine weight: ± 2600 kg Machine equipped with: - Longitudinal and cross feed. - Rapid traverse on longitudinal and cross feed. - Adjustable and movable stops for automatic longitudinal feed. - Thread cutting axis (cutting of Metric/Inch/Module/DP thread possible. - Quick-change tool holder. - 2-axis digital readout (Brand: Sino). - 3-jaw chuck Ø 315 mm, passage 100 mm (Camlock). - 4-jaw chuck Ø 400, passage 105 mm (Camlock). - Drive plate Ø 630 mm (Camlock). - Fixed steady rest Ø 120- Ø 260 mm. - Follow steady rest Ø 20 – Ø80 mm. - Coolant device.

Condition: used, Year of construction: 1993, sheet width 1550 mm plate length 2525 mm plate thickness 6,4 mm Ljdpovh Ndpofx Aa Rerr Punching capacity 200 kN speed of positioning X 50 m/min speed of positioning Y 50 m/mih no. of strokes 200 / 400 Hub/min control MNC 32000 ATC 22 Pos total power requirement 7,5 kW

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 700 mm, spindle speed (max.): 8,000 rpm, Traveling column machine New machine Work table clamping area mm 1500 x 1000 Table height mm 750 Number of T-slots 6 Size of T-slots DIN 650 mm 18 Travel paths X-axis mm 1500 Y-axis mm 1000 Z-axis mm 700 Distance table top edge - spindle bottom edge min/max. mm 150 / 850 Main spindle drive for speed 8000 min-1 AC motor, frequency controlled kW 16 at 44% ED Speed range: min -1 15 – 8000 Torque at 44% ED Nm 104 constant up to min -1 1500 Feed drives X-axis AC servo motor kW 3.5 Y-axis AC servo motor kW 2.0 Z-axis AC servo motor kW 3.5 Rapid traverse speeds (X/Y/Z): m/min. 30/30/20 Indirect position measuring system. Accuracy Positioning accuracy X, Y axis to 1000 mm mm ± 0.0150 Repeatability X, Y axis mm ± 0.0075 Positioning accuracy Z axis mm ± 0.0150 Lredpfx Asvwip Dsa Rsr Repeatability Z axis mm ± 0.0075 Tool magazine 24-way - Tool positions 24 - Tool shaft (DIN 69871 / 69872) SK 40 - Max. tool diameter mm 76 - Max. tool length mm 250 - Max. tool weight kg 8 Machine control Heidenhain TNC 620

Condition: new, Year of construction: 2024, load capacity: 1,500 kg, Ideal for welded constructions, fixture construction, welding templates Special price promotion €2000 discount 3-D perforated table 2400 x 1200 x 200 mm Thickness of the table top 20 mm, diameter of the holes 28 mm, grid 100 mm Pivoting range 360° Height adjustment hydraulic motor 800 to 1200 mm Lifting movement hydraulic, rotation movement 360° Control with hand remote control Speed 0.5 rpm Hydraulic motor AC 2.2 KW Current AC 380 V Motor power 0.75 KW Price includes offered perforated plate 2400 x 1200 x 200 mm Price includes accessories shown, surcharge €2000 We offer the tables in many sizes and load capacities: Load capacity 500 Kg, dimensions 1000mm x 1500mm x 200mm, bore 28mm with manual or automatic height adjustment Load capacity 1000 Kg, dimensions 1000mm x 2000mm x 200mm, bore 28mm with manual or automatic height adjustment Load capacity 1500 Kg, dimensions 1200mm x 2400mm x 200mm, bore 28mm with manual or automatic height adjustment Load capacity 2000 Kg, dimensions 1200mm x 2400mm x 200mm, bore 28mm with manual or automatic height adjustment Load capacity 3000 Kg, dimensions 1200mm x 2400mm x 200mm, bore 28mm with manual or automatic height adjustment Load capacity 5000 Kg, dimensions 1500mm x 3000mm x 200mm, bore 28mm with height adjustment manually or automatically Lrsdpfxovlplzs Aa Rjr

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 750x1000x1350 mm Weight 420 kg Total power requirement 2,7 kw Ledpfxjvz Hdtj Aa Rorr

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2150x480x1330 mm Weight 230 kg Ljdevz Hi Nopfx Aa Rorr Total power requirement 1,6 kw

Year of construction: 1956, condition: used, Spur gear chain hoist, spur gear chain hoist, hand chain hoist, lever hoist, chain hoist, crane, assembly hoist, assembly chain hoist, manual trolley, push trolley, crane trolley, trolley, crane trolley, crane trolley, trolley -Load capacity: 1500 kg -Travel distance: 4.8 m -Chain: with ring eyelet, without hook -Dimension: 260/300/H500 mm -Weight: 51 kg Ledpfefwg H Uox Aa Rerr

Condition: good (used), Gear motor, electric motor, electric gear motor -Speed: 7.5 rpm -Power: 0.25 kW Lrjdsd N Elvjpfx Aa Ror -Construction: B3 -Diameter shaft: 30 mm -Protection class: IP 54 -Dimensions: 510/190/H245 mm -Weight: 29 kg

Condition: used, Braking resistor, charging resistor, damping resistor, filter resistor -Manufacturer: SEW Eurodrive -Type: BW017-024-02 -Item no.: 17962218 -Power: 1.44 kW -Number: 3x resistors available Ljdpfxjd Ar U So Aa Rorr -Price: per piece -Dimensions: 550/330/H150 mm -Weight: 10.5 kg

Condition: good (used), Gear motor, electric motor, electric gear motor Lrodpjcvnaasfx Aa Ror -Speed: 24 rpm -Power: 0.55 kW -Construction: hollow shaft -Diameter hollow shaft: 27 mm hexagon -Protection class: IP 44 -Dimensions: 510/200/H190 mm -Weight: 15.7 kg

Condition: good (used), Geared motor, electric motor, electric geared motor -Speed: 20 rpm -Power: 0.25 kW -Shaft diameter: Ø 25 mm Lsdpfx Aaoc R R A Ee Rsrr -Design: B5 angle -Protection class: IP 54 -Brake -Number: 2x motors available -Price: per piece -Dimensions: 460/270/H190 mm -Weight: 24.3 kg

Condition: new, Load Weight Shelf 14000 kg Loading weight per level 2000 kg Number of load levels 7 Stk. Recommended material length 3000 mm Column width 1500 mm Shelf height 2440 mm Lodpfx Aefgyg Ssa Rorr dimensions 2,3 x 0,9(1,35) x 2,45 m

Condition: used, Power supply unit, converter, power supply, switching power supply -Type: EXI-05030 -Input: 170 - 264 VAC/2.5 A -Output: 5 VDC/30 A -Dimensions: 195/95/H60 mm -Weight: 0.9 kg Ledpfx Aed Tn Dcea Rsrr

Condition: refurbished (used), Used, complete reconditioned, 1 year warranty, plate size 1500 x 1500 mm, 75 plates, open spout, 30 mm cake thickness, pressure max. 3500 liters, filter surface 270 m², dimensions 8500 x 2200 x 2400 mm, weight 28,000 kg, plate transport, motor hydraulics, drip tray, filtrate, with or without filter cloths Lrsdjfbbp Uopfx Aa Rsr

Condition: ready for operation (used), Indramat 2AD160C-B350A2-BS03-B2V2 Motor - 236 NM / 1500/6000UPM - 37 / 53KW,used, minor signs of wear, 100% functional, scope of delivery as per photos ATTENTION: Please inquire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Lrodet Adpfopfx Aa Ror

Year of construction: 2024, condition: new, Parameter: JSW-1500 Laser power: 1500W Life span of laser source: 100,000 hours Laser wavelength: 1064 - 1070nm Cable: 10m (15m on request) Operating temperature: -10 - 45℃ Working environment humidity:%: 10 - 90% Positioning: laser pointer (red dot or line) Protective gas: nitrogen / argon / oxygen Power supply: 1-phase 220V 50/60 HZ Maximum total power consumption: 8.2KVA/37.3A Average power consumption: 4.9KVA Unit operation status indication: Operating status indication regarding water cooler, protective mirror temperature, controller temperature Thickness of welded sheets: 0.5 - 8mm Maximum gap width: ≤2mm Laser beam width in cleaning function: 0 - 70mm Cooling method: water-based Control method: touch panel / monitor and PLC Wire feeder - fully automatic Weight of the machine: 175kg Machine dimensions: Height 800mm, Width 540mm, Length 900mm. Lredstwzhvjpfx Aa Rsr Material processing capabilities for the JSW 1500W welding function. Material: Stainless steel 0.5 - 5mm Carbon steel 0.5 - 5mm Galvanized sheet metal 0.5 - 5mm Aluminum 0.5 - 4mm Price includes: - JSW welding system of your choice - Laser source [MAXPhotonics or Raycus]. - Automated wire feeder - Working gun with the function of working in modes: welding, cleaning, cutting. - Integrated cooling system - Touch control panel with menu in Polish language - Set of welding nozzles - Spare safety glasses - Safety glasses OD6+ - Welding mask OD8+ - Warranty 24 months

Condition: used, Year of construction: 1901, 1500 ltr. Capacity PTO shaft Container attachment Hydraulic pusher / Ljdpfx Ajr Hnt Uea Rjrr

Condition: used, Year of construction: 1993, suction capacity: 1,500 m³/h, negative pressure: 3,600 Pa, Dust extractor,welding fume extractor by Herding. Self-cleaning, pneumatic filter for plasma, laser, sandblasting, sodding, grinding plaster, cement, plastic and all kinds of dry dust. The filter is cleaned pneumatically by pulses of compressed air during operation, thus high efficiency of the device. High-quality filter cartridges of HSL type are made of sintered polyethylene with the possibility of cleaning have several times longer service life compared to ordinary cartridges. As standard, the coating is made of PTFE, which in combination with the body material (PE) provides a very high chemical durability. 4 Kw fan Ledjtq Ufvopfx Aa Rorr Capacity - 1500 m3/h Filtration area - 38 m2 Control cabinet Inlet diameter - 180 mm Mag. no: 0848/2

Condition: used, Mechatronic drive system, gearbox, spur gear, angle gear, worm gear, Movigear -Manufacturer: SEW-Eurodrive, Gearbox Movigear Type MGFAT2-DSM-DSC-B/IV/WA/PE/A i 55,25 -Speed: 3.6 to 36.2 rpm -Hollow shaft: Ø 30 x 90 mm -Individual components: see photos Lodpfx Aajrqipgs Rjrr -Number: 3x gearbox available -Price per piece -Dimensions: 230/170/H365mm -Weight: 16 kg/piece