Used Inject Star Pi 36 for sale (8,971)

Year of construction: 2004, condition: used, A BATTENFELD large-format horizontal injection molding machine in need of repair is offered. Operating pressure: 210bar, clamping force: 4500kN, screw diameter: 85mm, injection volume: 2128cm³, injection pressure: 1624bar, tie-bar spacing X/Y: 900mm/800mm, opening stroke: 950mm, max. mold height: 970mm, oil capacity: 900l, connected load: 55kW, operating hours: approx. 82510h, weight: approx. 20.4t. The servo motor for the screw drive is defective. In addition, some smaller parts are missing. An on-site inspection is possible. Ndedpfx Aaozvy E Ao Rea

Condition: good (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 243708, screw diameter: 15 mm, total length: 2,500 mm, total width: 1,500 mm, total height: 2,500 mm, overall weight: 1,700 kg, power: 39 kW (53.03 HP), input frequency: 50 Hz, input voltage: 400 V, input current: 64 A, controller manufacturer: SELOGICA, control voltage: 230 V, ARBURG ALLROUNDER 220 S 180-70 injection molding machine - Rated current for motor heater: 57 A - Includes core puller, manufacturer: MARCZINKOWSKI Nodpfxszldp Rj Aa Reda Please note: the item must be picked up on September 3, 2026, at a date to be confirmed. FCA D-58507 Lüdenscheid - loaded onto a truck.

Condition: used, functionality: fully functional, machine/vehicle number: 40711, Single jersey circular knitting machine, Mayer & Cie. model MV 1, machine number 40711. Made in Germany. NAMEPLATE DATA · Nominal diameter: 914 mm / 36 inch · Gauge: 28 E · Pitch: 0.91 mm · Number of needles: 3168 · Manufacturer: Mayer & Cie., Emil-Mayer-Straße 10, D-72461 Albstadt, Germany · No CE marking 36" DIAMETER WITH GAUGE 28. With 3168 needles, this machine has the highest needle count in the lot. A 36-inch diameter combined with a fine 28 E gauge is designed for wide-width production: mattress ticking, home textiles, shirting, and lightweight outerwear. EQUIPMENT FITTED · Phototex FM8 electronic fault scanner (ITE), CE marked · Senso+ lubricator by EQ Systeme, 5-liter tank · Air filter-regulator · Control panel with start and stop push-button station · Hengstler counters · Top creel CONDITION Machine assembled, currently protected with film for storage. Viewing, inspection, and a running test on-site can be arranged. Njdpezvn S Rjfx Aa Rjda DIMENSIONS AND TRANSPORT · Approximate dimensions: length 2.70 m · width 2.00 m · height 2.70 m · Location: Albacete, Spain

Condition: excellent (used), Year of construction: 2015, clamping force: 4,200 kN, screw diameter: 70 mm, clearance between the columns: 820 mm, injection pressure: 1,212 bar, injection weight: 1,103 g, mold height (min.): 380 mm, Clamping force: 420 t Year of manufacture: 2015 Injection shot volume: 1,100 g Injection unit: 2300 Screw diameter: 70 mm Specific injection pressure: 1877 bar Injection volume: 1212 cc Injection shot volume: 1,100 g Pump motor power: 51 kW Cylinder heater power: 27 kW Screw L/D ratio: 20 Clamping force: 420 t Tool plate dimensions: 1200 x 1200 mm Distance between tie bars: 820 x 820 mm Ejector force: 96 kN Tool height: 380 - 825 mm Opening stroke: 770 mm Maximum platen distance: 1595 mm Ejector stroke: 230 mm Oil tank capacity: 78 kW Weight: 21000 kg Dimensions (m) L x W x H: 8.02 x 2.21 x 2.57 m Year of manufacture: 2015 Control system: NC5 Equipment: - Hydraulic core pull: 4 (+ 2 additional connections on the fixed platen) - Hydraulic cascades: 4 - Hot runner adjustment points (zones): 40 - Servo-drive hydraulic pump activeDrive (energy-saving) - Adjustable p+v injection in a closed-loop system - Wear-resistant screw, bimetallic cylinder - Automatic mold height adjustment - Clamping force adjustment - activeProtect mold protection - Switchover to pressure-based clamping (WID) - PDE process data logging, 100% monitoring Nsdpozwdzkofx Aa Rsda - 8-circuit cooling water regulator - EUROMAP 67 interface - World Connect - remote service - DR 832 CNC robot and safety fencing included

Condition: new, Order picking trolley, shelf trolley, shelf trolley, trolley, transport trolley, shelf with wheels, shelf with boxes including 36 x visible storage boxes Data: H: approx. 216 cm D: approx. 68 cm L: approx. 1.95 linear meters Load: 150 kg per level Stand in blue Crossbeams in orange Storage boxes in blue Natural chipboard Ndjdpjzuxquofx Aa Rsa New goods BLT / WR 20/60 100% quality at the best price. Shelf consists of: 02 x stands approx. 200 cm x 60 cm, pre-assembled. 14 x crossbeams approx. 185 cm. 07 x support shelf approx. 184.5 x 59.5 cm. 28 x locking pins. 36 x visible storage boxes size. 5 (500x300x200mm) 02 x swivel castor with brake 02 x swivel castor without brake 04 x base plate for swivel castor Levels: 7 storage levels -- AVAILABLE IN MULTIPLE NUMBERS IMMEDIATELY-- Price: €822.00 net €978.18 gross You will receive an invoice with VAT shown. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Our recommendation: Let us know what you need... We are happy to help you realize your projects, from planning to ordering to assembly. Are you interested or have any questions? Just contact us by message or call. You can find our telephone number on our company website. ☎️ You can reach us by phone from Monday to Friday, 8:00 a.m. to 3:00 p.m. Alternatively, you can send us a message with your name and number and we will get back to you as soon as possible.

Condition: ready for operation (used), Trumpf / Hüttinger 1456168 control box Flow 36-48kW SN: 200128104 - 13.56MHz E, used, in good condition, 100% functional, scope of delivery as per photos Ndjdpszu Hkpofx Aa Rja

Condition: new, Siemens Teleperm M 6DS1702-8AA E10 with C79458-L442-B1 E34-36, unused, in original packaging Ndsdpfx Aaezu E Igj Roa

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, For sale: a brining injector from Günther Nedpfoy Uwr Tex Aa Reda Type: PI 26 M including filter system GRF 200 K Year of manufacture: 2015 Capacity: approx. 500 – 800 kg/h Stroke rate [strokes/min]: 10-60 strokes Passage diameter: 210 mm Belt length: 1100 mm Equipped with 26 needles, needle thickness (standard) approx. 4.0 mm The injection volume can be continuously adjusted from 2 to 25% The machine is in very good condition and ready for immediate use.

Condition: used, empty load weight: 3,600 kg, maximum load weight: 24,900 kg, overall weight: 28,500 kg, axle configuration: 2 axles, first registration: 10/1979, total length: 6,800 mm, total width: 2,500 mm, total height: 1,500 mm, suspension: steel, tire size: 16,5R22,5, color: black, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, 2 axles, BPW axles, air suspension, lift and lower function, supports. Body: for 20-foot containers, drum brakes, 2x 10-ton BPW axles. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! Nedpfx Aaji Rnzpe Rsda

Condition: used, Year of construction: 2008, Injection molding machine Ferromatik Elektra 50-300, model year 2008 Injection molding machine Ferromatik Basetec 85-493-520, model year 2009 Injection molding machine Ferromatik Elektra 1100-450 evol., model year 2006 Injection molding machine Ferromatik K 110s-2F, model year 1999 Injection molding machine Ferromatik K 125s/2F, model year 1995 Ndsdezvwfgjpfx Aa Roa Injection molding machine Ferromatik K 200s-2F -493, model year 1999 Engel Priamus Bito Leo Locative Hot runner controller Gammaflux G 24 Conveyor belts Temperature control units Accessories, Walther couplings

Year of construction: 2008, condition: used, A Demag all-electric injection molding machine with Wittmann 3-axis robot and safety enclosure is offered. Clamping force: 1500kN, locking force: 1650kN, max. mold opening stroke: 495mm, min./max. mold height: 275mm/585mm, max. distance between mold platens: 1080mm, mold platens X/Y: 770mm/770mm, clear distance between tie bars X/Y: 520mm/520mm, max. mold weight: 1700kg, max. mold weight on the movable mold platen: 1150kg, ejector stroke: 125mm, ejector force: 35kN, ejector retraction force: 35kN, screw diameter: 35mm, L/D ratio: 20, max. injection pressure: 2430bar, stroke volume: 166cm³, shot weight: 146g, max. metering stroke: 173mm, max. nozzle stroke: 400mm, nozzle immersion depth: 20mm, nozzle contact force: 30kN, installed barrel heating capacity: 9.4kW, material hopper capacity: 35l, control: CDIAS, operating hours: approx. 76000h, machine weight: approx. 7400kg. Including WITTMANN 3-axis robot, year of manufacture: 2006, travel X/Y/Z: 550mm/1200mm/2000mm, robot weight: approx. 240kg as well as safety enclosure and 1 × core pull preparation AS. Documentation available. An on-site inspection is possible. Njdpfjzvginex Aa Roda

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 178759, clamping force: 2,000 kN, screw diameter: 35 mm, installation height: 350 mm, total length: 5,000 mm, total width: 2,200 mm, total height: 3,800 mm, overall weight: 13,000 kg, power: 53.5 kW (72.74 HP), input frequency: 50 Hz, input voltage: 400 V, controller manufacturer: ARBURG, table diameter: 1,500 mm, ARBURG ALLROUNDER 1500 T 2000-350 Injection Molding Machine Nsdezlfmkjpfx Aa Reda - Clamping force: max. 85 kN - Opening force: max. 120 kN - Opening stroke: max. 300 mm - Distance between mold plates: max. 650 mm - Screw travel: max. 145 mm Note: The item must be picked up between September 8th and 10th, 2026, on a date to be confirmed. FCA D-63128 Dietzenbach – loaded onto a truck.

Condition: new, Year of construction: 2026, Screening drum with star discs, separation distance 15mm Medium screening - grain size 0 - 20/25mm Adapter system Lehnhoff MS03 - not included in the price - available upon request Excavators from 4 tons / wheel loaders from 3.5 tons Cutting width 800 mm / 3 drums Capacity 0.30 m³ Throughput / hour 10.5 - 15 m³/hour Working pressure 200 - 250 bar Oil requirement 50 - 60 l/min - Separation of stones, branches, roots, turf, debris, etc. from still usable waste soil, for example for topsoil in landscaping. - The simultaneous mixing of compost, sand, substrate, etc. with the screening process is easily possible. - Screening of coarse stones from excavation soil - Screening of stones from mixed soil after demolition. - Feeding clumped soil onto a screening system reduces waste and increases throughput. TSE.083 - the bearings are maintenance-free; the chains should be sprayed with chain spray every 20 operating hours via the maintenance flaps. Nodezvfrnepfx Aa Reda Dimensions and weight without adapter.

Condition: ready for operation (used), Year of construction: 1989, machine/vehicle number: D205228, Heinrichsglueck H-36 welding positioner Fully functional. Ndsdpfxjuiac Hs Aa Rea Square table 1050x1050mm. The set includes a remote control with adjustment of table rotation speed and inclination (135 degrees). New power and control cable.

Condition: good (used), Year of construction: 2007, operating hours: 24,210 h, screw diameter: 32 mm, This Dr Boy injection moulding machine is currently in storage at Plastima Used Machinery. The machine is from 2007 and has relatively few operating hours for its age. - Brand: Dr Boy - Model: 55M - Year of manufacture: 2007 - Screw diameter: 32 mm - Shot volume: 96.5 cm³ - Clamping force: 55T Nodpfx Aaszuk E Ds Reda - Operating hours: 24,210

Condition: used, Year of construction: 1994, Filter area: approx. 8m², number of filter leaves: 9, vessel capacity: 720l, allowable operating overpressure: 6bar, allowable operating temperature: 80°C, vessel diameter: approx. 760mm, inlet: DN50, outlet: DN50, vent: DN25, solids discharge: DN350. Pumps and piping are available. Filter empty weight: approx. 750kg, space requirement X/Y/Z: approx. 2000mm/1790mm/2800mm. Inspection possible by arrangement. Ndodezu S Adopfx Aa Rea

Condition: used, Year of construction: 2021, operating hours: 5,048 h, functionality: fully functional, machine/vehicle number: 245467, ENGEL DUO 17060/2000 injection moulding machine with ENGEL Viper 60 robot (robot working area, conveyor belt) – year 2021 For sale: ENGEL DUO 17060/2000 injection moulding machine, year of manufacture 2021, in excellent technical condition. The machine has been regularly serviced and operated in stable production conditions. Technical data and information: - Manufacturer: ENGEL - Model: DUO 17060/2000 - Clamping force: 2000T - Year of manufacture: 2021 - Operating hours: 5048 h Njdeycc N Sopfx Aa Rjda - Type: two-platen injection moulding machine - Condition: very good, fully functional Additional equipment: - ENGEL Viper 60 robot – perfectly matched to the machine, ready for direct integration into a production line, robot working area, conveyor belt. Offer advantages: - Low number of operating hours - Modern, energy-efficient design - High process repeatability and precision - Complete package: injection moulding machine + robot, robot working area, conveyor belt Ready for immediate commissioning

Condition: used, Year of construction: 1998, A Klöckner DESMA rubber injection molding machine with increased clamping pressure is offered. Material processing: rubber, clamping force: 4500kN, min./max. mold height: 180mm/530mm, adjustable opening stroke: 570mm, clear distance between tie bars X/Y: 600mm/810mm, max. clamping area X/Y: 670mm/940mm, heating platen size X/Y: 670mm/940mm, injection: from above, max. injection volume: 3300cm³, injection force: 1886kN, max. injection pressure: 2150bar, screw diameter: 55mm, injection plunger diameter: 105mm, operating pressure: 250bar, number of control zones: 12, heating capacity per control zone: 21kW, ejector: hydraulic top and bottom, ejector slot spacing: 730mm. The machine is currently not operational because the control cabinet of the DRC 2000 (Simatic S7) is already being used elsewhere and is not part of the machine. Documentation available. Inspection possible by arrangement. Ndjdpfx Aaozuz Age Rea

Year of construction: 2023, operating hours: 2,000 h, condition: used, Drive: Diesel-electric Power: 55 kW / 80 kVA Equipment: Predefinable fractions Quick-change system Centrifugal separator Duramax cleaning elements Split-speed system Extra-long conveyor belts Operating position: Length (mm): 12,700 Width (mm): 11,200 Loading edge (mm): 3,500 Discharge height (mm): 3,500 Transport dimensions: Length (mm): 11,950 Width (mm): 2,550 Height (mm): 4,000 Weight (kg): 25,000 Ndjdpfexrzymox Aa Roa OPTIONALLY available: Stone belt Tracked chassis Magnetic head rollers Air separator (windsifter) Automatic central lubrication And much more…

Condition: excellent (used), Year of construction: 2008, JSW J350AD Injection Molding Machine Electric injection molding machine Year of manufacture: 2009 Type: Electric injection molding machine Total installed power: 30 kW Clamping unit • Clamping force: 3440 kN Ndjdpfx Aaezvwwvj Rja • Distance between columns (H × V): 730 × 730 mm • Minimum mold height: 300 mm • Maximum mold height: 670 mm • Maximum mold opening stroke: 700 mm • Maximum ejector stroke: 152 mm • Maximum ejector pin height: 365 mm • Diameter of centering ring: Ø 160 mm • Dimensions of mold mounting plates (H × V): 1085 × 1085 mm Injection unit • Screw diameter: Ø 66 mm • Maximum injection shot weight for PS: 890 g • Maximum injection shot weight for PP: 767 g • Maximum injection speed: 160 mm/s • Maximum injection pressure: 1770 bar • Nozzle orifice diameter: 6 mm

Condition: excellent (used), Year of construction: 2017, ENGEL DUO 11050/2300 injection molding machine Year of manufacture: 2004 Operating hours: 70,029 h Type: hydraulic, two-platen, large-format injection molding machine Clamping unit • Clamping force: 23,000 kN / 2300 t • Dimensions of mounting plates: 2900 × 2500 mm • Distance between columns: 2000 × 1600 mm • Minimum mold height: 700 mm • Maximum mold height: 1890 mm • Maximum opening width: 3800 mm Injection unit • Screw diameter: 135 mm • Injection volume: 8870 cm³ • Injection shot weight for PS: 8071 g • Maximum injection pressure: 1600 bar • Screw: replaced in 2011 Nodezvwl Tepfx Aa Rjda • Screw design: reinforced, adapted for processing special materials Additional equipment • Magnetic plates for mold mounting – functional and ready for use • Number of hydraulic cores: 2 • Number of mold heating zones / hot runner channels: 36 • Number of hydraulic cascades: 10 • Mold tilting option • Robot: not included Magnetic mold clamping system The machine is equipped with functional magnetic plates, enabling quick mold mounting and replacement. The system is fully operational and constitutes a significant piece of additional equipment for the machine, especially with frequent mold changes. Machine weight • Weight of the main unit: approx. 113 t • Weight of the control cabinet and additional elements: approx. 18 t • Total approximate weight: approx. 131 t

Condition: excellent (used), Year of construction: 2017, WITTMANN BATTENFELD Macro Power 900/8800 injection molding machine Ndedszvwiropfx Aa Roa Year of manufacture: 2017 Serial number: 138337-100 Machine with Wittmann robot Clamping unit • Clamping force: 9,000 kN / 900 t • Opening force: 300 kN • Maximum opening stroke: 2,100 mm • Minimum mold height: 500 mm • Maximum mold height: 1,000 mm • Maximum distance between platens: 3,100 mm (with max. mold height of 1,000 mm) • Dimensions of mounting platens: 1,720 × 1,550 mm • Distance between columns: 1,200 × 1,000 mm • Ejector stroke: 300 mm • Ejector force: 165 kN Injection unit 8800 • Screw diameter: 105 mm • Screw pitch: 525 mm • L/D ratio: 22:1 • Theoretical injection volume: 4,545 cm³ • Maximum injection pressure: 1,931 bar • Maximum screw speed: 167 rpm • Maximum plasticizing rate: 151 g/s • Screw torque: 8,000 Nm • Maximum volumetric flow rate: 725 cm³/s • Injection flow rate with dual pump – option: 906 cm³/s • Nozzle stroke: 950 mm • Nozzle clamping force: 129 kN • Cylinder heating capacity: 53.9 kW • Number of cylinder heating zones: 7 Hydraulic system / drive • Pump power: 90 kW • Oil tank capacity: 1,100 l • Heating power: 53.9 kW Dimensions and weight • Machine length: 10,100 mm • Machine width: 3,400 mm • Machine height: 2,700 mm • Machine weight: 35,200 kg / 35.2 t

Condition: used, functionality: unexamined, Year of construction: 2026, load capacity: 159 kg, empty load weight: 461 kg, construction height: 2,780 mm, total length: 1,400 mm, drive type: 220V/50Hz, construction width: 740 mm, working height: 13,100 mm, Specialized aerial work platform Ndjdpszu D U Eefx Aa Rsa Technical condition: Normal

Condition: excellent (used), Year of construction: 2015, KRAUSS-MAFFEI KM 900-8100 GX injection molding machine Year of manufacture: 2015 Clamping force: 9000 kN / 900 t Control system: MC6 Closing system: hydraulic-mechanical, two-platen Injection unit: 8100 Design and control Hydraulic-mechanical two-platen closing system with 4 pressure cushions on the stationary platen and 4 adjusting units on the moving platen. PV – injection unit adjustment. MC6 control system, based on an industrial computer with real-time Ethernet technology, equipped with an integrated 19-inch control panel with a color touchscreen, LED backlighting, and ProcessDesigner process visualization. Plasticizing unit Complete plasticizing unit for thermoplastics, featuring abrasion protection. Screw diameter: 105 mm Backflow valve: yes Nozzle: open Closing unit Nsdezvm T Tepfx Aa Roda Mold clamping force: 9000 kN / 900 t Mold opening force – pressure cushions: 630 kN Dimensions of mounting plates (H × V): 1660 × 1530 mm Distance between columns (H × V): 1180 × 1000 mm Maximum mold opening stroke: 1600 mm Mold height min./max.: 500–1100 mm Maximum distance between platens: 2100 mm Ejector stroke: 300 mm Ejector force front / rear: 140 / 70 kN Injection unit 8100 Screw diameter: 105 mm Ls/D ratio: 23:1 Maximum injection pressure: 1778 bar Injection volume: 4546 cm³ Injection weight for PS: 3228 g Injection rate: 805 cm³/s Screw speed: 150 rpm Nozzle clamping force: 166 kN Electrical and hydraulic equipment Rated power of pump motor: 120 kW Installed power of heaters: 59 kW Number of cylinder heating zones: 7 Dry cycle time / stroke according to EUROMAP 6: 3.3 s / 826 mm Dry cycle time / stroke according to KraussMaffei standards: 2.9 s / 590 mm Oil tank capacity: 1450 l Dimensions and weight Machine dimensions (L × W × H): 10.72 × 3.03 × 2.51 m Net weight including control cabinet: 40 t

Condition: excellent (used), Year of construction: 2018, KRAUSS-MAFFEI KM 900-8100 GX injection molding machine Year of manufacture: 2018 Control system: MC6 Clamping system: hydraulic-mechanical, two-platen Injection unit: 8100 Design and control Hydraulic-mechanical two-platen clamping system with 4 pressure pads on the fixed platen and 4 adjustment units on the moving platen. PV – injection unit adjustment. MC6 control system, based on an industrial computer operating with real-time Ethernet technology. Integrated 19-inch control panel with a color touchscreen, LED backlighting, and visualization of all running ProcessDesigner processes. Plasticizing unit Complete plasticizing unit for thermoplastics with abrasion protection. Screw diameter: 105 mm Backflow valve: yes Nozzle: open Nozzle radius: 25 mm Nozzle opening: 9 mm Clamping unit Clamping force: 9000 kN / 900 t Mold opening force: 630 kN Platen dimensions (H × V): 1660 × 1530 mm Distance between columns (H × V): 1180 × 1000 mm Standard maximum distance / opening width: 2100 mm Ejector stroke: 300 mm Ejector force front / rear: 140 / 70 kN Injection unit 8100 Screw diameter: 105 mm Ls/D ratio: 23:1 Maximum injection pressure: 1778 bar Injection volume: 4546 cm³ Injection weight: 3228 g* Injection speed: 90 mm/s Nsdpfx Aezvm E Aja Roda Injection rate: 779 cm³/s Standard screw speed: 150 rpm Plasticizing rate at standard speed: 135 g/s* Nozzle pressure force: 166 kN * according to the manufacturer's specifications / reference material provided. Electrical and hydraulic equipment Rated motor power: 120 kW Installed heater power: 59 kW Number of cylinder heating zones: 7 Dry cycle time / stroke according to EUROMAP 6: 3.3 s / 826 mm Dry cycle time / stroke according to KraussMaffei standards: 2.9 s / 590 mm Required hydraulic oil quantity: 1450 l Dimensions and weight Machine dimensions (L × W × H): 10.72 × 3.03 × 2.51 m Net weight including control cabinet: 40.0 t