Used Interbake Interbake V-Mix 80 for sale (47,409)

Year of construction: 2017, condition: good (used), Manufacturer: Zasche handling Type: GV 80 Year of construction: 2017 Csdpfx Adjunyxaj Nsgt Load capacity: 80 kg with crane runway and lifting device

Condition: excellent (used), Weiss Type: WK3-2200/40/5/V Cjdpjw I Rxrsfx Ad Negt Weiss Climate Test Chamber, Water-Cooled Specifications for Temperature Testing: Temperature range: -40°C to +180°C Temperature change rates: Heating: 6.0 K/min Cooling: 11.5 K/min Temperature deviation: Temporal ± 0.8 K Spatial ± 2.0 K Heat compensation max. 8000 W Specifications for Climatic Testing: Temperature range: +10°C to +95°C Dew point temperature range: +4°C to +94°C with closed floor element Humidity range: 10 to 95% rH Temperature deviation (temporal): ± 0.3 K Humidity deviation (temporal): ± 3% rH Temperature uniformity: Spatial ± 1.0 K Heat compensation max.: 500 W Test chamber volume: 2,160 liters Test chamber dimensions: Height 1,115 mm, Width 1,400 mm, Depth 1,400 mm External dimensions (lowered): Height 2,318 mm, Width 1,860 mm, Depth 3,658 mm External dimensions above shaker: Height 2,710 mm External dimensions max. stroke height: 3,038 mm Exchangeable floor dimensions: Width 1,600 mm, Depth 1,504 mm Operating Data: Rated voltage: 3/N/PE AC 400V +10% 50Hz Rated power: 38.0 kW Rated current: 63.0 A Customer-side fuse: 80 A slow-blow Refrigerant: R 404A Weight: approx. 2,100 kg Important information for your safety as a buyer: The following points will be carried out on the chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with refrigerant compliant with legal regulations 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors excepted!) We are happy to answer any further questions you may have by phone.

Condition: excellent (used), Vötsch Type: VBT 03/500 Air-cooled Temperature test chamber with spray device Cjdjwc Nvgspfx Ad Negt Technical description: Data for temperature tests without water: Temperature range -30°C to +80°C Temperature deviation in steady state according to IEC 60068-3-5 dependent on the test chamber temperature over time ± 1 K Temperature change rate according to IEC 60068-3-5 Heating: approx. 2 K/min. Cooling: approx. 2 K/min. Data for temperature tests with water Temperature range +5°C to +80°C Possible water level -10 mm to 540 mm Water level = -10 mm The water level is below the insert grid Water level = 0 mm The water level is at the top edge of the insert grid Data for standard spray device Number of spray nozzles: 6 Spray volume per nozzle: 0.5 l/min Data for spray device according to EN 539-2, Method B Number of spray nozzles: 6 Spray volume per nozzle: 4.5 l/min Additional flooding nozzles: 2 Spray volume of additional nozzle: 6 l/min Compressed air consumption: approx. 3 m³/h Data for water tank with pre-temperature control Volume: approx. 2000 l Temperature range for pre-temperature control +5°C to +40°C Temperature change duration Cooling of +18°C to +5°C approx. 15 h Heating from +15°C to +40°C approx. 10 h Installation and Operation Data: Test chamber: Width 1120 mm, Depth 840 mm, Height 540 mm Housing: Width 2700 mm, Depth 1300 mm, Height 1575 mm Water tank: Width 1100 mm, Depth 800 mm, Height 2200 mm Plug-ins 1 50 mm diameter plug installed on the left Test chamber capacity: approx. 500 liters Refrigerant R-404a Electrical connection: Nominal voltage 3/N/PE AC 400V ± 10% 50Hz Nominal power approx. 26 kW Nominal current approx. 44.0 A (neutral conductor loaded) Fuse protection 63 A gG, on-site Weight approx. 890 kg net For your safety, please note the following information! The following steps are carried out on our chambers in advance: 1. Functional testing and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak testing with a certificate 4. After successful testing, the chambers are subjected to a documented test run. Condition: Used Scope of delivery: (See image) (Subject to changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Here we offer you Defensor steam humidifier. Defensor Mk5 Resistance Steam Humidifier Steam humidifier Defensor Mk5 The Defensor Mk5 steam humidifier is built according to the current state of the art and the recognized safety regulations. Nevertheless, in the event of improper use of the Defensor Mk5 steam humidifier, hazards may arise for the user and/or third parties, and/or or material assets may be damaged. To ensure safe, proper and economical operation of the Defensor Mk5 steam humidifier, please observe and comply with all the information and safety instructions contained in these Cgsdpfsnyh T Dsx Ad Nst installation and operating instructions. Defensor Mk5 type series Visual For indirect or direct room humidification with normal requirements for control accuracy. Defensor Mk5 Visual double unit large 80 max. steam capacity in kg/h 80.0 400V/3~/50...60Hz Mk5 ... 80 unit A: 40 kg/h unit B: 40 kg/h Type: Defensor Mk5 ... 80 Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: good (used), Pneumatic cylinder, air cylinder, pneumatic piston, air piston Cgjdpfx Aefxrfrsd Not -Manufacturer: Festo, standard cylinder type DNU-80-570-PPV-A -Stroke distance: 570 mm -Piston: Ø 80 mm -Piston rod: Ø 25 mm/M20x1.5 -Dimensions: 785/95/H95 mm -Weight: 7 kg

Condition: ready for operation (used), Serfilco EO 1 1/4CL5-DM1.0-DPA-ST-SX with VEM K21R 80 K 2 DOD FDS-SR/5334 motor, height 370 mm + motor 235 mm, cover plate 355 x 250 mm, external Ø drain nozzle 59 mm, used, good condition, 100% functional Cgodsi D N Nhspfx Ad Nst

Condition: as good as new (ex-display), Year of construction: 2025, One-sided automatic edge banding machine with pre-milling unit, direct glue application to straight workpieces, end trimming station with VR function , HF-top and bottom milling unit, chain feed, double roller top pressure and extendable work piece support. For ABS and PVC roll material as well as fixed lengths from 0.4 – 2.0 mm and of 8 – 50 mm work piece thickness. • Speed: 5,5 m/min. • 2 spaces for finishing unit • 5,6“ Colour Touch screen →Automatic edge feeding for roller material over turntable D = 600 mm →Two reverse, operating-controlled pre-milling units with diamond charged helical joining millers provide a neat and tear-free premilling of the work pieces before the gluing of the edge material →Glue application directly to workpieces: Teflon-coated glue pot with a capacity of 1,5 kg, leak-proof with glue supply from below (excess glue automatically flows back into the glue pot). Glue roller allows exact dosage of glue. Electronic temperature control with automatic stand-by function (reduces probability that the glue burns if the machine is not used for a longer period and is still turned on) →Pneumatically operated cut-off knife from roll material up to 2 mm edge thickness →Pressure unit consisting of one driven pressure roller synchronized with glue spreading roller and one adjustable pressure roller with spring tension for a nearly invisible joint of the edge material with the work piece →End trimming station for front-and back egde with HF-Motor 0,27 KW /12000 U/min ,milling head with interchangeable knives and VR Function for vertical rounding . Automatic setting from workpiece, with dust collector system →High-frequency top and buttom milling station, 2 powerful 0.27 kW high-frequency motors with HM-WPL special millers; suitable for radius and bevel milling, horizontal and vertical scanning of the work piece; aggregate adjustment equipped with digital readouts for setting to various edge types; 2 extraction hoods, height adjustment of the upper aggregate with the top roll pressure →OMRON 5,6“ colour touchscreen controls glue temperature settings, automatic temperature reduction for stand-by function of the machine, switching on and off of aggregates and error diagnosis Csdpfxeip Uzpe Ad Nsgt Additional finish aggregates (1 free space): →Glue scraper unit : Removes eventual glue rests with a slight draw cut from the glue joint of the work piece surface →Buffing unit : 2 motors 0,09 kW, 1,500 rpm provide a super-finish for ABS and PVC edge material 67641340ec347

Condition: ready for operation (used), Demag DCS-Pro 1 80 1/1 H3 VS30-30 chain hoist / crane SN: 94828902 - load capacity: 80 kg / control cable length: 2.00 m - chain length: 1.40 m, used, in good condition, fully functional, delivery as per photos. Cgodpox Eq Hljfx Ad Njt

Condition: ready for operation (used), Festo EMME-AS-80-S-LS-AMB servo motor 2093107 H9 SN: 3S7PLKFNKLX, used, in good condition, 100% functional, delivery as per photos. Cjdpfx Adjx Ernqj Njgt

Condition: ready for operation (used), Festo EMME-AS-80-S-LS-AMB servomotor 2093107 H9, serial number: 3S7PLKFS6LL, used, in good condition, fully functional, scope of delivery as per photos. Cedpfxsx Ernwj Ad Njgt

Condition: ready for operation (used), Fanuc A06B-6127-H209 amplifier SV 80/80HV SN V11345531, used, minor signs of wear, 100% functional, delivery as per photos. Cjdpex Erfcefx Ad Nsgt

Condition: ready for operation (used), Fanuc A06B-6127-H209 amplifier SV 80/80HV SN V11119827, used, minor signs of wear, 100% fully functional, scope of delivery as shown in the photos. Cgjdpfx Aex Erd Sod Njt

Condition: used, Year of construction: 1992, machine/vehicle number: 120 4687, Press capacity: 80 ton Ram stroke adjustable: 4 -60 mm Slide adjustment: 0 - 80 mm Shut height (stroke down, adjustment up): 310 mm Free frontal opening L-R: 800 mm Table height over floor: 1150 mm Table surface area : 780 x 640 mm Slide area: 800 x 460 mm Hole in table: 690 x 170 mm Number of strokes: 30 - 300 s.p.m. Required power: 21 kW Height over floor approx.: 2900 mm Weight of machine approx.: 12 ton Cgjdpsuqc I Asfx Ad Njt Control: Siemens S5 Standard configuration Roll feeder Type WAV - RDS 2E 1125Material width max. 310 mmMaterial thickness 0,3 - 3 mmMaterial cross section 630 mm2Feeding speed 80 m/minFeeding roll diameter 125 mm 

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 78 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), volume flow: 930 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of Cgsdpfxsvwlqqs Ad Nst 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), first registration: 04/2008, total length: 10,800 mm, total width: 2,550 mm, color: grey, Year of construction: 2008, Equipment: ABS, = Additional options and accessories = - Air suspension = Notes = Iveco Eurocargo tractor own weight: 3,955 kg, total weight: 7,490 kg with Heinemann 2-axle low-loader trailer, own weight: 3,500 kg, total weight: 14,500 kg. Euro 5 engine. Only 107,907 km. German registration. Valid inspection until 06/2025. = Further information = General information Mileage: 107,907 km Cabin: Day cab Technical information Cgjdswzkdijpfx Ad Njt Power: 162 kW (220 hp) Fuel type: Diesel Transmission: 6-speed, manual gearbox Weights Unladen weight: 3,500 kg Payload: 11,000 kg Gross vehicle weight: 14,500 kg Environment Emission class: Euro 5 Condition Technical condition: very good Visual condition: very good Further information Please contact Gerrit Haverhoek for more information.

Condition: ready for operation (used), Year of construction: 1999, operating hours: 2,466 h, functionality: fully functional, machine/vehicle number: 13147, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, table width: 560 mm, table length: 1,000 mm, TECHNICAL DETAILS Travel X-axis: 800 mm Y-axis: 600 mm Z-axis: 500 mm Spindle Speed range: 20 – 12,000 rpm Tool holder: SK40 Table Dimensions: 1,000 x 560 mm Tool magazine: 30 positions MACHINE DETAILS Weight: 7,000 kg Spindle hours: 2,466 h Machine operating hours: 34,485 h Power: 15 kW (at 40% duty cycle) Frequency: 50 Hz Operating voltage: 400 V Cgodpfxsw Nqh As Ad Njt Control voltage: 24 V Total rated current: 44 A EQUIPMENT Chip tray Heidenhain TNC430 control Heidenhain touch probe system Extraction unit Electronic handwheel

Condition: new, Year of construction: 2022, functionality: fully functional, Fully automatic KESMAK KMS280V band saw for tube and bar material. This is a new machine from 2022 which has only served as a show model at trade fairs. The sawing machine has been developed for fully automatic cutting of tube or bar from Ø10 - Ø135MM as well as bundles. Cjdowhcmijpfx Ad Nsgt Complete with chip discharge (screw conveyor) and feed conveyor.

Condition: good (used), Year of construction: 2012, DEMAG crane chain hoist DCM-Pro 2 80 1/1 H2.8 V16/4 80 kg with crane canopy (2x3m) The DCM-Pro manulift was developed for safe and fast load handling with one-hand operation. The DCM-Pro is based on the lifting unit of the DC-Pro chain hoist and the DSM-C control unit. Due to the control unit being rigidly connected to the load handling attachment, the operator only needs one hand to operate the chain hoist as well as to guide the load. Manufacturer: DEMAG Type: Crane chain hoist Model: DCM-Pro 2 80 1/1 H2.8 V16/4 Load capacity: 80 kg Control: GSA Type 4 Movement radius: sideways 3 metres and forwards/backwards 2 metres Steel beam: included in the offer Condition: used  Cgjdpfx Adohwd E Ne Nst Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines. Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: used, very good condition Csdpfx Aohc T Irjd Nogt

Condition: used, Year of construction: 2017, fuel type: diesel, Equipment: cabin, * Anfragen gerne per WhatsApp * LInde H 80-3/900 * Diesel * EVO * 8000 kg NL * 14055 kg GG Cjdjn E Sxgepfx Ad Nsgt * 3+4 Steuerkreis * Klima * Straßenbeleuchtung * Arbeitsbeleuchtung * Rundumlicht * Rückfahrcamera * Reifen 8.25-R15 * 315/70R25 * deutsches Fahrzeug * 1. Hand * gegen Aufpreis mit Mehrpalettengabel * · Netto-Verkauf innerhalb der EU wird nur noch mit MWST Kaution und dem Nachweis der Zulassung im Bestimmungsland (Gelangensbestätigung) durchgeführt, · Verkauf nur an Gewerbe, Transport zum Hafen möglich, Dieses Angebot ist unverbindlich und freibleibend. Irrtum und Zwischenverkauf vorbehalten. · Keine Gewähr auf Eingabefehler. Besichtigungen nur nach Vereinbarung, WhatsApp

Condition: new, Extraction capacity of filter unit at spigot*: 980 m³/h Total power consumption*: 0.71 kW Operating voltage: 400 V, 50/60 Hz,3Ph+PE Noise level*: 68 db(A) Dimensions L/W/H in mm: L 1290 / W 345 /H 595 Colour: RAL 7035 Weight: 79 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on filter equipment Special voltage or special colour on request Application: Separation of emulsion mist, for medium to very large machine workrooms. Your advantages of the COBARON series: - 15 unit variants available - Direct from the manufacturer - ISI-TRONIC as standard (digitalised filter control) - Electronically controlled EC fan as standard Cgodpfx Adeh Rfbqj Nst - Adjustable speed and air flow rate - Available with a wide range of filters - High-quality filter media in the pre-filter and main filter area - Separation rates of up to 99.95 - Large range of mounting and connection accessories - Flexibly adaptable to the application - Optimum service life - Quality Made in Germany With COBARON, we offer a filter system that meets today's diverse processing possibilities and the resulting pollutant profiles. In the standard programme alone, the COBARON combination filter system offers various filter equipment variants and can thus be variably configured for many applications. The various configuration levels of the COBARON series were specially developed for applications that were borderline cases for many filter systems (mechanical or electrostatic). The combination of both proven filter principles in the appropriate application increases the effectiveness of the air filter and extends the service life. COBARON can be operated as a purely mechanical filter unit with different filter stages - or additionally configured with an electrostatic filter cell. Our filter units are already digitalised as standard and can be controlled with a laptop, for example.

Condition: used, Year of construction: 2006, IMA Novimat edge banding machine: Manufacturer: IMA Type: Novimat Concept/I/G/80/650/R3 Year of construction: 2006 Machine no.: 08113 Rated power: 41 kW Workpiece feed: Sliding chain Stop fence: Adjustable stop fence 700.080 Slide-in table: 63.152 Milling unit: 08.378 Glue level monitoring: Available Glue application unit: 04.0832 Gluing unit: 04.1570 PU premelter: 283.203 HK tool holder: For high-speed motors Snipping unit: 08.42 Trimming unit: 08.0555 Multiple processing unit: 08.348 Multiple profile scraper unit: 08.516 Flat scraper: 08.517 Copy corner buffing unit: 08.604 Buffing unit: 08.617-4 Safety devices: Light barriers, temperature controller, control terminal Additional equipment: Roller conveyor table in front Total machine length: Approx. 11 /16 m Suction device: Included Cedpfx Ajrnkw Dsd Negt Accessories: Edge magazines: 2 sliding magazines for gluing edges, each for 12 rolls, mobile Plasma edge heating (PLASMATREAT Düstec): 2 plasma devices Switch cabinet Panel return system (manufacturer: VENJAKOB): Components: 7 belt conveyor tables, belt width approx. 100 cm, different table lengths Round belt conveyor table Switch cabinet system 2 angular transfer tables Peripheral stations for edge processing line: Consisting of: Interface system Barcode scanning system

Year of construction: 1986, condition: used, pressure 40 t dayligth 250 mm stroke 8 - 50 mm table clamping surface LxW 620 x 450 mm table height over floor 980 mm no. of strokes 85 - 500 Hub/min Cgjdscb T Twspfx Ad Njt distance between columns 680 mm ram - range of adjustment 50 mm number of T-slots 4 ram surface mm total power requirement 8 kW dimensions of the machine ca. 2,3 x 2,2 x 2,8 m weight of the machine ca. 5,8 t - Unidor Tool monitoring - Kaiser gripper feed, band width 180 mm, feed length 150 mm - Kaiser scrap shear on the left side - soundproof cladding

Condition: used, Year of construction: 1998, pressure 80 t throat 335 mm stroke 8 - 100 mm no. of strokes 60/90 Hub/min table surface area 900 x 670 mm hole in the table 280 x 200 mm Cedpfx Adjuild Aj Nsgt dayligth max. 450 mm ram adjustment 80 mm ram surface 700 x 450 mm tool dimension, max 700 x 450 mm weight of tools max. 140 kg total power requirement 11,07 kW weight of the machine ca. 6,5 t dimensions of the machine ca. BxLxH 1,72 x 2,0 x 2,82 m

Condition: good (used), Year of construction: 2005, operating hours: 50,888 h, functionality: fully functional, clamping force: 250 kN, screw diameter: 22 mm, displacement volume: 38 cm³, injection weight: 25 g, mold height (min.): 150 mm, opening stroke: 333 mm, plate width: 470 mm, plate height: 280 mm, installation height: 330 mm, Engel ES 80/25 HLV machine in good condition. The machine is connected to power and can be inspected at any time. Tie-bar-less (holmlos). Csdpfsx Ex I Dsx Ad Nsgt