Used Irrigation Hose for sale (2,229)

Condition: good (used), Inert gas welding device, arc welding system, MIG/MAG welding system -Scope of delivery: without wire feed unit with hose package, according to the pictures -Manufacturer: Ess, inert gas welding machine MIG-MAG 520 MW without wire feed -Type: 520-2MW -Max. Welding power: 500 A Ljdpjlpi S Njfx Agtshk -Water-cooled -Dimensions: 1160/500/H810 mm -Weight: 303 kg

Condition: used, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 06/2024, next inspection (TÜV): 06/2026, Tipping ram: Hyva, chrome-plated tipping ram matel - stroke 7100 mm - tipping warning signal, connection: 1" hydraulic connection with thread and hydraulic hose: 2.2 m long with 1" (inch) screw connection - female! Cranked aluminum chassis, aluminum body with tunnel, steel support legs, SAF off-road axles, 1st axle lift axle, 6x 385/65 R22.5 Bridgestone RT tyres, 1 towing hitch, round LED rear lights, 2+1, quick-release tarpaulin lock. Toolbox, removable step ladder, 2 shovel holders (outside), 25L water tank, ASW in front cargo area, pneum. Vibrators at the front of the floor with control valve on the left side, grain bunker with brackets on each grain chute lBin smooth side walls - Double-walled longitudinal hollow chamber profiles - Vertical gradient inner thickness (3 mm at half height) - Inner length 9.50 m - Inner usable height 2200 mm - Inwardly beveled top chord profiles, floor trough with tunnel - Floor thickness 5mm, Inside usable width (mm) 2410, floor reinforcement struts - Doubling of the top chord profiles - Front wall 14° sloping front wall - Thickness 4mm - Conical recess and reduced to 450mm interior space Door Universal door - Double linkage locks - Folding upper crossbar - 2 door leaves - 1 grain slider with protective cover in each leaf - Rubber seal on the leaves and on the rigid frame, Door wing type Smooth-walled door wings Continuous welds on the inside of the door, roller tarpaulin system - White transparent strips - Side tensioning straps - Round aluminum roof bows (100mm spread) - Rounded upper part, hinged, adjustable, removable, foldable on the side - Aluminum forged MULTIFUNCTION Tarpaulin stops (straight - offset - foldable), Tarpaulin pole Yes Half locking bar - Door lock Pneumatic automatic unlocking of the swing frame with 4 hooks Upper door hinge Swing flap upper aluminum Double ratchet - Removable Integrated in the side wall height Grain pusher Right & left (aluminum) Ledpfjrt N Sfjx Agtshk

Condition: good (used), functionality: fully functional, machine/vehicle number: FN542059, Year of construction: 2017, operating hours: 9,400 h, load capacity: 2,000 kg, lifting height: 4,700 mm, free lift: 1,500 mm, load center: 500 mm, fuel type: electric, mast type: triplex, construction height: 2,130 mm, battery capacity: 750 Ah, battery voltage: 48 V, fork length: 1,200 mm, front tire type: cushion tires (black), rear tire type: cushion tires (black), empty load weight: 3,658 kg, Equipment: cabin, lighting, sideshift, Jungheinrich EFG 320 4-wheel electric forklift, year of manufacture 2017 with a Triplex mast Details: Jungheinrich EFG 320 Year of manufacture: 2017 Work hours (h): 9400 Mast type: Triplex Lift height (mm): 4700 Freelift (mm): 1500 Build height (mm): 2130 Attachments: Sideshift Lift capacity (kg): 2000 Fork length (mm): 1200 Ledpfx Agozlfclstshk Weight (kg): 3658 Additional hydraulic vehicle: AH2 Additional hydraulic mast: AH2 Front wheels: Superelastic Rear wheels: Superelastic Battery YOM: 2017 Battery capacity (Ah): 750 Battery voltage (V): 48 Accessories: Front & rear wipers. Flashing beacon. Comments: Full freelift. AH2 hoses to the fork carriage.

Condition: used, functionality: fully functional, machine/vehicle number: 36520, mileage: 38,200 km, power: 175 kW (237.93 HP), first registration: 07/2022, overall weight: 15,000 kg, fuel type: diesel, color: orange, axle configuration: 4x2, fuel: diesel, wheelbase: 3,560 mm, driver cabin: day cab, gearing type: mechanical, emission class: euro6e, suspension: steel-air, loading space volume: 7 m³, Equipment: ABS, air conditioning, airbag, central locking, cruise control, differential lock, electronic stability program (ESP), immobilizer system, traction control, truck registration, The mileage of the offered vehicles may vary, as some vehicles are currently in rental use. Lsdpfxozi Uh Se Agtohk Further comparable vehicles are available upon request. Right-hand drive, 6-cylinder engine OM 936, ABS, ASR, ESP, disc brakes, engine brake, reinforced frame, front axle 5.3 t, rear axle 11 t with air suspension and differential lock, lane keeping assistant, active brake assist, hill start assist, underrun protection, reversing warning sound, daytime running lights, rain sensor, light sensor, pollen filter, plastic toolbox, fuel tank capacity: 125 l, AdBlue 8, comfortable driver's air-suspended seat, fixed passenger seat, air conditioning, cruise control, rain sensor, electric windows, electrically adjustable and heated mirrors, radio CD with Bluetooth, speed limiter, central locking with remote control, immobilizer with transponder, underrun protection, digital tachograph, sun visor, reversing camera, sunroof. Hydraulically driven turbine with stepless speed control, tank made entirely of stainless steel, additional manual pump for lifting the boiler, weight indicator, operating hour counter, sweeping hour counter and water level indicator (remaining quantity 300 l), automatic shut-off of the water supply when lifting the sweeping unit and also when engaging reverse gear, acoustic signal in the cab when the boiler is raised, 2 LED rotating beacons + 2 LED work lights, sound insulation in the unit compartment, sweeping unit on the right/left, with dual sweeping system, sweeping width: 2300 mm/ with dual sweeping system: 3940 mm, disc brush with steel bristles, diameter 700 mm, adjustable disc brush angle (joystick on the right and left), roller brush made of mixed polypropylene and steel wire bristles L=1500 mm, diameter 400 mm, spray nozzles for disc brush, continuous spray bar at the front with 6 spray nozzles, 3 spray nozzles per disc brush, 6 spray nozzles in the suction nozzle, 5 spray nozzles on the sweeping roller, weed brush type "C" mounted on the right, water system for cleaning the upper suction shaft with external water connection, leaf grid made of stainless steel, area approx. 2m², lifting and lowering pneumatically with vibration mechanism, turbine wheel made of Hardox 700, 8 mm thick, housing arch made of Hardox AISI 316, integrated into the structure, filling via hose with return flow protection, water pump Wilden, P1, diaphragm pump, dry-running protection, leaf suction system at the rear, reversing camera with monitor in the cab, PM 10, holder for brush and shovel, cable remote control.

Condition: used, Year of construction: 2013, operating hours: 915 h, functionality: fully functional, power: 24 kW (32.63 HP), fuel type: diesel, empty load weight: 1,700 kg, total length: 3,126 mm, construction height: 1,969 mm, drive type: Diesel, construction width: 1,090 mm, sweeping width: 1,850 mm, Street sweeper Speed class: 25 Condition: Ready for use and fully functional Lhodjzk Sghjpfx Agtok Technical condition: normal Description: Machine completely inspected in the workshop, cleaned, and passed new UVV and inspection! - Rear-view camera and monitor - Reversing light - Working light on the right - Universal tires - Safety package - Spreader cable - Driving speed 20 km/h - Lubrication points for container and sweeping unit - Seat with mechanical suspension - Universal suction container with circulating water system - High-pressure cleaner - Sweeping unit with 2 brushes - Suction nozzle attachment - Disc brush, plastic - Hand suction hose

Condition: ready for operation (used), Year of construction: 2022, operating hours: 1,936 h, travel distance X-axis: 3,048 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, overall weight: 14,334 kg, spindle speed (max.): 7,500 rpm, spindle motor power: 22,400 W, number of axes: 4, This 4-axis HAAS VF-10/50 was manufactured in 2022. It features an impressive X-axis travel of 3048 mm, Y-axis travel of 813 mm, and Z-axis travel of 762 mm. The machine includes a robust table size of 3048 x 711 mm and a maximum table load of 1814 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF-10/50 vertical machining centre we have for sale. Contact us for further details. • Spindle nose to table (max): 35.0 in (889 mm) • Spindle nose to table (min): 5.0 in (127 mm) • Spindle • Max torque: 340 ft‑lbf @ 700 rpm (460 Nm @ 700 rpm) • Drive system: 2‑speed gearbox Lodpfx Agszh Hlaotehk • Bearing lubrication: Air/oil injection • Cooling: Liquid cooled • Table • Length: 120.0 in (3048 mm) • Width: 28.0 in (711 mm) • T‑slot width: 0.626–0.630 in (15.90–16.00 mm) • T‑slot center distance: 4.92 in (125 mm) • Number of T‑slots: 5 • Max table load (evenly distributed): 4000 lb (1814 kg) • Feedrates • Max cutting feed: 360 ipm (9.1 m/min) • Rapids: X 360 ipm (9.1 m/min), Y 600 ipm (15.2 m/min), Z 600 ipm (15.2 m/min) • Axis motors (max thrust) • X: 3400 lbf (15,124 N) • Y: 4100 lbf (18,238 N) • Z: 5600 lbf (24,910 N) • Tool changer • Type: SMTC • Capacity: 30+1 • Max tool diameter (all pockets full): 4.0 in (102 mm) • Max tool diameter (adjacent pocket empty): 10.0 in (254 mm) • Max tool length (from gage line): 16 in (406 mm) • Max tool weight: 30 lb (13.6 kg) • Tool‑to‑tool (avg): 4.2 s • Chip‑to‑chip (avg): 6.3 s • General • Coolant capacity: 95 gal (360 L) • Air requirements • Air required: 4 scfm @ 100 psi (113 L/min @ 6.9 bar) • Inline air hose: 3/8 in • Coupler (air): 3/8 in • Minimum air pressure: 80 psi (5.5 bar) • Electrical • Drive system: 2‑speed gearbox • Input AC voltage (3‑phase) low: 220 VAC, 70 A (FLA) • Input AC voltage (3‑phase) high: 440 VAC, 35 A (FLA) • Dimensions – shipping • Domestic pallet: 288 in x 102 in x 132 in (732 cm x 260 cm x 336 cm) • Export crate: 288 in x 105 in x 134 in (732 cm x 267 cm x 339 cm) • Domestic pallet with EC option: 288 in x 102 in x 140 in (732 cm x 260 cm x 356 cm) • Export crate with EC option: 288 in x 105 in x 141 in (732 cm x 267 cm x 359 cm)

Year of construction: 2010, condition: excellent (used), Complete microbrewery for sale: Brewhouse 10 HL: High-quality brewing pan (Schulz), double-walled with smooth cooking process, lauter tun and whirlpool, complete piping, hoses. Automatic mashing with electrical pannel, control for hot water heating, malt mill, small appliances. Fermentation cellar: Wort cooler, ice water container, 5 open fermentation tanks 10HL, 5 storage tanks 20 HL, 3 serving tanks 10 HL. Wort pump, hoses, temperature control. Precoat filter, yeast pan. Bottle cellar: Lhedpof Ni Rvsfx Agtek Fully automatic inline filler, 8 digits, soft wheel, round bottle cleaner Lots of accessories, small parts, hoses, etc. For sale as build in. Cranes and loaders for free.

Year of construction: 2011, condition: used, functionality: unexamined, US welding system with UPS 20L - Ultrasonic generator Martin Walter MW 2000 WMI Lhjdpezlnb Rsfx Agtek - The previously installed printer is missing - One or two air hoses are leaking - A test camera is missing - Shipping is possible for an additional charge.

Condition: new, Year of construction: 2022, Paint mist extraction New device Lhedpfxew I Uyge Agtek Year of manufacture: 2022 Ideal for woodworking companies, joineries/cabinetmaking shops, and trades in general Highly efficient air purification with a high separation rate Mobile unit for use at various locations in the workshop Easy handling Certified for ATEX Zone 2 Long filter service life Ready-to-plug-in delivery Extraction nozzle diameter: 300 mm Dimensions (L x W x H): approx. 1012 x 1135 x 1405 mm Connection: 1.5 kW / 400 V Filter area: 1 m² Maximum noise emission sound pressure level: 72 dB(A) Maximum volume flow: 500 Pa Weight: 175 kg Incl. starter set for FAG 1-4 (€445) Diameter: 300 mm (3 m hose, 2 hose clamps, 1 collar with flanged ring, 1 closure flap for exterior wall) Availability: short-term Location: Hochheim

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33802035389, empty load weight: 3,160 kg, maximum load weight: 34,840 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 03/2024, next inspection (TÜV): 03/2027, total length: 7,690 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 90 %, color: grey, The images are archive images! The vehicle may still be in use! Fine-grained steel welded construction, fifth wheel coupling with interchangeable 2" kingpin (Chassis prepared for subsequent retrofitting, drip tray, 4 x hose holders, footboards, Fliegl standard) Container fittings: 1 x 20 ft in the center (or swap body container 7.15 / 7.45 / 7.82), not retractable at the front, the pivot pins of the container locking mechanism in the longer version. 24 tons, 2-speed landing gear, single-sided operation, with semi-circular lower part and straight connection plate, with stroke compensation Chocks with holder Side underrun protection Rear underrun protection with deep step for easier access + footboard inside Semi-elliptical fenders with anti-spray flaps according to EC Axles + Suspension BPW or SAF disc brake axles at the manufacturer's choice, with 430 mm disc diameter, "Axle/chassis laser-aligned" to reduce tire wear and fuel consumption Axle spacing offset 1410/1310 mm (combined transport) up to 44 tons gross vehicle weight Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, actuated by "3x braking" (starting aid is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) Braking system 2-line compressed air braking system Color-coded line routing for easy servicing. Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connection line 24 Volt EBS, electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be pulled by towing vehicles which ensure the effectiveness of the ABS! with lifting and lowering valve + auto-reset function Vehicle - Driving Stability System Axle load detection via EBS-CAN bus signal, for display on the dashboard in the driver's cab, the truck must be prepared accordingly, no truck installation (no calibrated scale) Wheels and tires 385/65 R22.5" manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights in LED, yellow LED lighting on the side, license plate lighting in LED, (Note! with certain towing vehicles, false diagnoses may occur, although the function is given) 2 white position lights at the front in LED 2 white/red side marker lights at the rear in LED 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front, without connection cable additional LED work lights at the rear, switched via reversing light Operating instructions This vehicle may only be loaded with 20' tank containers that comply with ISO 668 and in particular ISO 1496-3! The tank containers must have "end-load-transfer areas"! Country of registration/Signage Germany with Dekra inspection and certificate (according to §13 EG - FGV) Lhjdpoy Tvuwsfx Agtsk 24/7 service hotline prepared for single-row license plate holder Warning sign according to ECE - 70 Contour marking with reflective strips according to ECE R 048, white on the side, yellow at the rear The images are archive images! The vehicle may still be in use!

Condition: ready for operation (used), operating hours: 4,028 h, functionality: fully functional, machine/vehicle number: WB843-2, mileage: 32,362 km, power: 55 kW (74.78 HP), first registration: 11/2020, overall weight: 3,500 kg, fuel type: diesel, color: orange, axle configuration: 4x4, maximum load weight: 1,550 kg, empty load weight: 1,990 kg, next inspection (TÜV): 11/2026, fuel: diesel, driver cabin: other, gearing type: hydrostat, emission class: euro5, loading space volume: 1.3 m³, number of seats: 1, number of previous owners: 1, Equipment: additional headlights, all wheel drive, hydraulics, low noise, soot filter, Hako Citymaster 1650 sweepers, first owner Engine inspection including oil, oil filter, and fuel filter will be carried out free of charge upon sale Machine version with a new pedal system 1,960 sweeping operating hours 4,028 total operating hours 10,568 sweeping kilometers 32,362 total kilometers 4x4 all-wheel drive – hydrostatic all-wheel drive Camera system for the suction shaft and rear Includes leaf suction hose (rare) Sweeping material container made of stainless steel Wheelbase 1,600 mm Track width 1,055 mm Fresh water tank 180 liters Unladen weight approx. 1,950 kg Permissible total weight 3,500 kg Length: 4,510 mm / Width: 1,210 mm / Height: 1,970 mm Driving speed 0-40 km/h Working speed 0-24 km/h Noise reduction package Selectable working speeds 1,600 - 2,400 rpm (ECO/Standard/MAX) Engine: water-cooled 4-cylinder Hatz industrial diesel engine Low emissions, Euro 5 Fuel tank approx. 60 liters Ledpezmzk Usfx Agtehk Hydrostatic all-wheel drive 2-circuit high-pressure hydraulics Circuit 1 (front) 0–50/0–70 l/min 225 bar Circuit 2 (rear) 0–20/25/30 l/min 195 bar Hydraulic service brake via foot pedal Cabin with air-sprung driver's seat Air conditioning / heating Water treatment system Hydrant connection Dosing system Permissible total weight: 3500 kg Unladen weight: 1950 kg Other applications possible through additional attachments from HAKO, such as sweeping brushes, snowplows and lawn mowers (not included) Errors, changes and prior sale reserved. We only sell under our general terms and conditions and with the exclusion of all warranties. Errors, changes and prior sale reserved. We are available Monday to Friday from 9:00 a.m. to 5:00 p.m., Saturday by appointment. Outside these hours, telephone appointments are possible. We will gladly accept your existing used equipment/vehicle in part exchange. Sales to commercial businesses and exporters will be given priority; this applies to our entire vehicle inventory. The above information is non-binding; errors/changes and prior sale reserved!

Condition: new, Hydraulic winch for log splitters, cranes, mini excavators, tractors, agricultural vehicles, vineyards, horticulture, and many other applications. The hydraulic attachment winch simplifies many tasks. - Pull and position firewood for the log splitter - Pull logs onto trailers - Pull out tree stumps and trees - As an attachment winch for forestry cranes and small excavators - As a winch for small tractors and narrow-gauge tractors A robust steel construction with 3-sided mounting options (left, right, rear) with 12 threaded holes, offering many possibilities for attaching the winch (the threads are cut and painted; they must be recut with a tap before use due to the rust protection). A 20 m long and 6 mm thick steel cable is installed. A large cable pulley ensures a long service life for the steel cable. We install hydraulic motors from 50 to 630 ccm (standard = 400 ccm), depending on the required speed and pulling force. Maximum working pressure: 225 bar peak Continuous operating pressure: 175 bar Displacement: 400 ccm Torque at 225 bar: 870 Nm peak Torque in continuous operation: 380 Nm Maximum pulling force: 1700 kg Weight: 49 kg Cable speed: 47 m/min at 60 l/min of hydraulic oil Color: red Dimensions: Length: 500 mm Length with swivel: 570 mm Front width: 120 mm Rear width: 180 mm Ljdpfjdf Ud Sjx Agtehk Bearing width: + 30 mm Motor width: + 200 mm Height: 250 mm The winch is available for mounting or welding. This version comes with a manual hydraulic valve and hoses to the motor. Article number: HAW1700-HV NOTE: Figures 2, 3, and 4 are examples of mounting options!

Condition: new, Hydraulic winch for log splitters, cranes, mini excavators, tractors, agricultural vehicles, viticulture, horticulture, and many other applications. The hydraulic auxiliary winch can simplify many tasks: - Pulling and positioning firewood to the log splitter - Pulling logs onto trailers - Pulling out tree stumps and trees - As an auxiliary winch on forestry cranes and small excavators - As a winch for small tractors and narrow-track tractors Lhsdpfx Agedf Ufdstok A robust steel construction with 3-sided mounting options (left, right, rear) with 12 threaded holes offers many possibilities for attaching the winch (the threads are cut and painted. They must be re-tapped with a tap before use due to the rust protection). A 20 m long and 6 mm thick steel cable is installed. Large cable pulley for long service life of the steel cable. We install hydraulic motors from 50 to 630 ccm (standard = 400 ccm), depending on the required speed and pulling force. Maximum working pressure: 225 bar peak Continuous operation pressure: 175 bar Displacement: 400 ccm Torque at 225 bar: 870 Nm peak Torque in continuous operation: 380 Nm Maximum pulling force: 1700 kg Weight: 49 kg Cable speed: 47 m/min at 60 L/min hydraulic oil Color: red Dimensions: Length: 500 mm Length with swivel: 570 mm Front width: 120 mm Rear width: 180 mm Bearing width: + 30 mm Motor width: + 200 mm Height: 250 mm The winch is available for mounting or welding. This version includes an electric hydraulic valve and hoses to the motor. Article number: HAW1700-EV NOTE: Figures 2, 3, and 4 are mounting examples!

Condition: new, Hydraulic winch HAW1700 with electric valve incl. manual operation and radio remote control for mounting on wood splitters, cranes, mini excavators, tractors, forklifts, mowing tracked vehicles, and telescopic loaders, for use in viticulture and horticulture, agriculture, construction, and forestry, as well as many other applications. Equipped with an electric hydraulic valve and radio remote control. The hydraulic winch HAW1700 can simplify many tasks. Maximum rope capacity of 30 m with 6 mm wire rope. Standard equipment includes 20 m of 6 mm wire rope. ⦁ Pull and position firewood for the wood splitter ⦁ Pull logs onto a trailer ⦁ Pull out tree stumps and trees ⦁ As an auxiliary winch on skidders and small excavators ⦁ As a winch for small tractors and narrow-gauge tractors A robust steel construction with the possibility of mounting on both sides (bottom, rear, top) with M12 threads. This allows for flexible use of the winch. Large, double-bearing rope pulley for long wire rope life. The pulling force is 1700 kg as standard. The winch can be installed in various positions. An optional hydraulic brake is available. Depending on the required pulling speeds and forces, we can offer you different options. Please contact us, and we will be happy to advise you. Lhedpjfn Tvhofx Agtok ⦁ Maximum working pressure: 225 bar peak ⦁ Continuous operating pressure: 175 bar ⦁ Displacement: 400 ccm ⦁ Torque at 225 bar: 870 Nm peak ⦁ Torque in continuous operation: 380 Nm ⦁ Maximum pulling force: 1700 kg ⦁ Weight: 49 kg ⦁ Rope speed: 47 m/min at 60 l/min oil flow ⦁ Color: red ⦁ Including hoses from the valve to the motor Dimensions: ⦁ Length: 500 mm ⦁ Length with rope inlet: 570 mm ⦁ Front width: 120 mm ⦁ Rear width: 180 mm ⦁ Bearing width: +30 mm ⦁ Motor width: +200 mm ⦁ Height: 250 mm Included: Radio remote control for the winch. ⦁ Control range: up to 100 m ⦁ Temperature: -35 °C to +80 °C Protection class: IP65

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902030381, empty load weight: 5,960 kg, maximum load weight: 29,040 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 03/2022, next inspection (TÜV): 03/2027, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,740 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22,5", color: black, The images are archive images; the vehicle may still be in use. Fine-grain steel welded construction, kingpin plate with replaceable 2" kingpin, outer frame slightly angled with "Load-Lock profile" for securing lashing straps, 24 tons. Two-stage support jacks, single-sided operation, with straight lower part, without thrust compensation. Note: Free support foot angle or free rear swivel radius approx. 1930 mm without supports, extension ladder at the rear, door latch on the side, pallet box for 32 Euro pallets (long version), ground clearance approx. 300 mm. Rear impact protection, "blocker," transverse steel angle zinc-plated, as forklift protection and to protect the door hinges, pallet stop on both sides approx. 15-20 mm high, in bolted version, loading height reduced by approx. 15-20 mm. Axles + Suspension SAF disc brake axles with 430 mm disc diameter, "axle/chassis laser-aligned" to reduce tire wear and fuel consumption, air suspension, without lift axle. Lhsdpfxjy Tvwxe Agtek Braking system: 2-line compressed air braking system, color-coded lines for easy servicing. Spring brake parking brake. 2 fail-safe coupling heads at the front, without connecting line, EBS manufacturer Haldex, electronic braking system with EBS socket at the front, without connecting cable, with raise and lower valve. Vehicle - driving stability system, brake pad wear indicator via EBS-CAN bus signal, for display on the dashboard in the cab, truck must be suitably pre-equipped, axle load detection via EBS-CAN bus signal, for display on the dashboard in the cab, truck must be suitably pre-equipped, no truck installation (no calibrated scale). Tire pressure monitoring system TPMS Haldex, via EBS, without truck installation (this must be possible in the truck). Electrical system: 24 volts, multi-chamber lights in LED with resistor, yellow LED lighting on the sides, license plate lighting in LED. 2 white position lights at the front, 2 white/red side marker lights at the rear, 1 x 15-pin socket at the front, without connecting cable, additional LED work lights at the rear, switched via reversing light. Floor: Sieve print plates approx. 30 mm thick, on longitudinal supports for high point load capacity for forklift axle load up to max. 7100 kg. Front wall / front corner posts 2,580 mm high, corner posts steel in full profile, release mechanism for side tarpaulin on the front wall, "crash blocker," at the bottom inside at approx. 140 mm height with steel impact protection. Side supports: 2 pairs of sliding supports, adjustable over the entire length, with 4 insertion pockets and at the bottom with a long pocket. 2 pairs of support positions. Insertion slats: 5 rows of aluminum V-shaped insertion slats. Rear wall / rear corner posts Corner posts at the rear steel to the bottom edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet. Rear portal doors, 2-leaf with 2 internal swivel latch locks each. Tarpaulin: Tarpaulin, with welded-in horizontal and vertical straps, tensioning buckles made of stainless steel. Roof: Sliding tarpaulin, rear end lift that can be folded up, with tarpaulin that can be slid from back to front, L-shaped roof beam for the automotive industry, internal width between the roof beams approx. 2,490 mm, tarpaulin color: white, roof non-elastic, minimal deflection of the roof beam during loading and unloading, anti-ice system, with 1 hose in the middle, with automatic forced ventilation via brake light, optimal rain strip at the r

Condition: reconditioned (used), Year of construction: 2021, operating hours: 1,681 h, functionality: fully functional, working width: 550 mm, area performance: 3,025 m²/h, overall weight: 380 kg, warranty duration: 12 months, water tank capacity: 75 l, TASKI SWINGO 2100 µicro SCRUBBER NEW 6V 175Ah GEL BATTERIES (SIAP) (4x) Manufactured in 2021 with 1681 hours of operation 550mm cleaning head equipped with two new medium-hard disc brushes for work on any surface. Lhodpfx Agjymd S Notsk New polyurethane squeegee rubbers resistant to oil, grease, and petroleum products. A built-in battery charger simplifies daily operation. The device is equipped with a new, durable drain hose and new suction hoses. The suction turbine ensures high water suction power from the squeegee. Each device we offer has individually taken photos; you buy exactly what you see. TECHNICAL DATA: Model: Taski Swingo 2100 µicro Power supply voltage: 24 V Brush working width (mm): 550 Suction width (mm): 630 Theoretical capacity (m²/h): 3025 Clean/dirty water tank capacity (l): 75/75 Working speed (km/h): 5.5 Number of brushes (pcs): 2 Brush rotation speed (rpm): 190 Weight without batteries (kg): 185 Total weight, ready to use (kg): 380 DIMENSIONS: Length with squeegee (mm) 1380 Height (mm) 1280 Width with squeegee (mm) 630 INCLUDED: NEW 6V 175Ah SIAP GEL BATTERIES (x4) NEW 280mm PPL 0.5 disc brushes (x2) NEW drain hose NEW suction hose Built-in battery charger Squeegee blade with new oil-resistant rubbers 5L Tenzi Normal fluid - FREE KEY FEATURES: The 75-liter tank allows for a large amount of cleaning solution, eliminating the need to frequently stop for refills. Thanks to its design, the machine is highly maneuverable. A small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface. The ergonomically designed cockpit and centrally located operator's seat provide excellent visibility of the cleaned surface. The large working width (550 mm) ensures high surface coverage. The control panel is very easy to read and intuitive to use.

Condition: used, Year of construction: 2013, Overview Complete filling line from the food sector made by the German manufacturer Breitner (2013). It was previously used for filling liquid cheese products and sealed with press on and screw closure. Further more spray pumps with rising pipes can be handled. Due to various additional features, such as a laminar flow system and special attention to hygienic design, a cleanroom classification is achieved. Machines: Pos. 1 Bottle unscrambler Breitner BFC 8002 (2013) Pos. 2 Filling machine Breitner MDL 2086 (2013) Pos. 3 Rotary capping machine Breitner SRT 5044 (2013) Conveyor systems: several conveyors included. All conveyors: Chain width: 82,5 mm Belt housing: stainless steel AISI 304 Belt guide: plastic c-profile, 2-fold and stainless steel rods Chain material: Delrin steel The unclosed bottles are protected of falling dirt by a roof made of plexiglas over the conveyor.  Bottle formats: Our service: send us your requirements and we will check the possibility of processing your bottle format. Cap formats: Screw caps, press-on caps, spray pumps with riser pipes   Our service: send us your requirements and we will check the possibility of processing your cap format. Lsdpfoxqzmwox Agtohk Capacity: Unscrambler: max. 6.000/h Filling machine: max. 5.000/h Rotary capping: max. 5.000/h The output depends on the container and cap geometries and the filling product.    1. Bottle Unscrambler BREITNER BFC 8002 - Operation: continuous from supply bin - Bin volume / drum Ø: 1.4 m³ / 1500 mm - Working height: 900 mm, left → right - Material / Housing: AISI 304 stainless steel + plexiglass - Safety: door switches, overload protection - Power / Air: 3 × 400 V, 4 kW / 400 Nl/min at 6 bar - Container size: round Ø ≤100 mm × 250 mm, larger on request - Feature: blow-cleaning station with ionized air and dust extraction 2. Filling Machine BREITNER MDL 2086 - Filling: mass flow, 8 stations (expandable to 12) - Filling range: 100 – 2000 ml/g, up to 5,000 bottles/h - Working height / direction: 900 mm, left → right - Product-contact parts: AISI 316, food-grade hoses, VITON seals - Tank / Pressure: 100 L, 5 bar - Power / Air: 3 × 400 V, 4 kW / 150 Nl/min at 6 bar - Container size: H 50–350 mm, Ø/width 50–80 mm, various shapes - CIP cleaning: 8 cleaning cups, automatic spray & drain, multi-step program - Extras: laminar flow, remote maintenance, additional filling valves, swiveling tray, heating system 3. Rotary Capping Machine BREITNER SRT 5044 - Operation: continuous rotary, 4 capping stations - Output: up to 5,000 containers/h - Container size: Ø ≤100 mm, H ≤300 mm - Working height / direction: 900 mm, left → right - Drive / Tools: servo motor, 0,3-3,5 Nm; BREITNER capping tools - Power / Air: 3 × 400 V, 4 kW / 100 Nl/min at 6 bar - Control: B&R controller, touchscreen, 200 format memories, password-protected - Safety & inspection: door switches, overload, “No bottle – no closure,” optical cap check, reject system - Extras: servo vertical movement, torque monitoring, fan-based cap feed, vibratory sorter VIB 8001, cap supply SFB 8001

Condition: new, mileage: 1,450 km, power: 510 kW (693.41 HP), first registration: 12/2025, axle configuration: 6x4, brakes: engine braking, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2025, Equipment: AdBlue, Apple CarPlay, Bluetooth, EBS, air conditioning, central locking, differential lock, electric window regulation, electronic stability program (ESP), navigation system, onboard computer, - Heated mirrors - Leaf spring suspension - Brake booster - Differential lock - Low noise - Air conditioning - Air-suspended seats - Sun visor MAN TGS 26.520 BB 6x4 EURO 6e Concrete pump EuromixMTP - SWAN TSP 38-5 160RZ First registration date: 12/2025 Vehicle equipment: MAN TipMatic 12.28 OD - MAN TipMatic Offroad, -TipMatic Efficiency, 300 l fuel tank volume - 35 l AdBlue tank volume High-performance engine brake MAN EVBec, adjustable MAN EasyStart hill start assist Differential locks on driven rear axles Suspension type: Leaf/Leaf (BB) on front axles and driven rear axles Sun visor, in front of windshield Windshield wiper operation, automatic, with rain sensor (rain sensor wiper) Daytime running lights, LED - High beam assistant - Work lights on the rear of the cab Exterior mirrors, electrically adjustable, heated Driver comfort seat, air-suspended - Armrests for driver's seat Multi-function steering wheel, height and inclination adjustable Preparation for toll collection system Toll Collect Tachograph, digital, with remote communication (according to DSRC), CONTINENTAL Color scheme Moon Grey for cab interior Air conditioning, manual Lift roof, mechanical - Rear wall of cab, with window 2 sockets, cab roof storage, 12 V and 24 V Traction control system (ASR) Cruise control (speed limiter) Lane departure warning system LDW MAN Media System Advanced 7 inch MAN Sound System Advanced - Smartphone Integration EUROMIX MTP - Concrete pump SWAN TSP 38-5 160 RZ Model: SWAN TSP 38-5 160 RZ Section: Concrete pump: Max. theoretical concrete capacity: 160 m³/hr Max. theoretical concrete pressure: 85 bar Stroke rate: 30 per min Delivery cylinder: Ø2100 mm x Ø230 mm Hydraulic main cylinder: Ø2100 mm x Ø140 x Ø80 mm Concrete valve: S-valve Water pump: 20 l/min - 170 bar Water tank: 600 l, 12 m hose with spray gun Concrete hopper: 600 liters Lubrication: Lincoln automatic lubrication for hopper group Hydraulic pumps: Rexroth 2xA4VG145, Rexroth A10VO28 Rexroth A17FO045, Blau Ascend AP 20.140/115 Switching system: Magnetic sensor (proximity switch) Switch box: DIGITEX, waterproof Remote control: Scanreco remote control + 30 m cable Section: Boom: Boom S 38-5 (5-section boom, RZ folding) Type: RZ folding Max. vertical reach: 37.5 m (without end hose) Max. horizontal reach: 32.7 m (without end hose) End hose: 3m single flange, DN 125 Platform type: X-type Slewing bearing: 365 degrees Slewing speed: 0.3 RPM Diameter of delivery line: 125 mm (outer diameter 132 mm) 5.5" flanges & couplings Control system Distance between front legs: 6.3 m Distance between rear legs: 8.2 m For further questions, our team is available in the following languages: We speak German We speak English Nous parlons français Lsdsy An Iuepfx Agtjhk Mówimy po polsku Мы говорим по русски Govorimo Srpskohrvatski Usable material: Concrete Front axle: Steered GVWR: 26,000 kg Brand of superstructure: EuromixMTP SWAN TSP 38-5 160RZ Pump: Yes APK (Technical Inspection): New TÜV inspection on...

Condition: reconditioned (used), functionality: fully functional, working width: 400 mm, area performance: 1,600 m²/h, overall weight: 55 kg, warranty duration: 12 months, water tank capacity: 25 l, KARCHER BR 40/25 C Bp Pack SCRUBBER NEW 12V 85Ah SIAP GEL BATTERIES (2x) 400mm cleaning head equipped with new medium-hard cylindrical brushes for work on any surface. New natural rubber squeegees A built-in battery charger simplifies daily operation. The device is equipped with a new, durable drain hose and a new suction hose. A new suction turbine ensures high water suction power from the squeegee. Each device we offer is individually photographed; what you see is exactly what you buy. Lhjdpsyi A Izefx Agtek TECHNICAL DATA: Working width (mm): 400 Suction width (mm): 770 Power supply: battery Clean/dirty water tank (l): 25/25 Brush pressure (g/cm²): 250 Brush speed (rpm): 1350 Theoretical capacity (m²/h): 1600 Weight (kg): 55 Dimensions (L x W x H) (mm): 800 x 575 x 830 INCLUDED: NEW 12V 85Ah SIAP GEL BATTERIES (2x) NEW 24V 500W suction turbine NEW 400mm PPL0.5 cylindrical brushes (2x) NEW suction hose NEW drain hose Squeegee blade with new rubbers Built-in battery charger 5 liters of Tenzi Normal solution - FREE KEY FEATURES: The 25-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. The machine's design makes it highly maneuverable. The small turning radius allows for operation even in narrow passages and alleys. The squeegee bar ensures precise suction of the solution from the cleaned surface. The large working width (400mm) ensures high surface coverage. The control panel is very clear and intuitive.

Condition: used, mileage: 18,500 km, power: 315 kW (428.28 HP), first registration: 04/2024, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, total width: 2,550 mm, total height: 3,650 mm, Year of construction: 2024, Equipment: ABS, air conditioning, electronic stability program (ESP), ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT Internal number: #423 Mercedes-Benz Actros 2543 L 6x2 / FFG Elephant Multi 11.003 MSR Water Recovery Vehicle Body by FFG Umwelttechnik, Flensburg * Tank material S355J2+N * Combined high-pressure jetting and vacuum suction vehicle with water recovery * Permissible working overpressure -1 / 0.5 bar * Approx. 11,000 liter tank capacity (air volume) * Approx. 8,200 liter max. sludge volume * Approx. 6,600 liter max. water volume * Discharge with telescopic piston and three piston positions * Automated piston system with closed lid * Automatic water recovery * FFG elephant comfort pro (CAN-Bus) control system * FFG elephant connect * Automatic water recovery Chassis: Mercedes-Benz Actros 2543 L 6x2 * TipMatic * 455 HP/335 kW * EURO 6 * Fuel capacity approx. 290 l * Chassis color: Novagrau * Cab color: MB 9147 Arctic White * Air conditioning * Navigation * Refrigerator * Multimedia cockpit Vacuum system Samson TruckMaster 2500 with approx. 2,200 m³/h * Water ring pump * Low-maintenance belt drive High-pressure system URACA P3-45 G60 * approx. 340 l/min. at 205 bar * Low-maintenance belt drive Hose reel system FFG Multifunctional Boom XL * Max. reach approx. 6,200 mm (telescopic) * Hydraulically swivels approx. 200° * Parallel guidance for high-pressure and suction hoses * High-pressure hose reel on tank top for 200 m DN 25 * Hose length measuring device DN 25 * Second high-pressure hose reel on the boom for 80 m DN 13 (hydraulic) * Suction hose reel for approx. 20 m DN 125 on tank top Special features for winter operation: HD system operable up to -10°C with heating * Hydraulic cable winch on boom * Tipable scrap bin * Vise * Brackets * Hand washing unit, heated * 7 work lights * 4 rotating beacons and LED flashers front and rear * Rear-view camera * Hose tray and enclosed equipment compartment * Heated wardrobe * Pressurized air connection for air filling * Various holders for tools and equipment Technical data GVW 26,000 kg * Unladen weight 18,700 kg * Length 8,670 mm * Height 3,650 mm * Width 2,550 mm For further detailed information and/or images, please contact us directly. You can find a large selection of more vehicles for SALE or RENT at: Changes, interim sale, and errors excepted. The buyer is obligated to independently verify the condition and equipment of the goods. Sale is exclusively subject to our Terms and Conditions and with exclusion of any guarantee or warranty. Lhjdjwv Dgyepfx Agtek

Condition: used, mileage: 272,250 km, power: 324 kW (440.52 HP), first registration: 06/2013, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: orange, gearing type: mechanical, emission class: euro6, Year of construction: 2012, Equipment: ABS, air conditioning, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT Internal Number: #480 MAN TGS 26.440 6x2 with KROLL High-Pressure Jetting and Suction Body with Water Recovery WRS2 Body KROLL Fahrzeugbau-Umwelttechnik GmbH * Type K 1.0-13.0/29 P * HOSE STORAGE CASSETTE WITH SIMULTANEOUS TELESCOPIC BOOM DN 125 * Maximum reach on pivot side: 5,200 mm * Tank material: S355J2+N (St. 52.3) * Water recovery system Lhsdowwf S Tjpfx Agtok * Telescopic piston with 3 locking positions * EMPTYING: via pneumatically operated piston * SLUDGE WATER DRAIN DN 80: for returning dirty water through the boom into the sewer. * Water compartments on the sides Chassis MAN TGS * 26.440 6x2 * manual transmission * EURO 6 * Fuel capacity approx. 400 l * Driver’s cab color: Municipal Orange RAL 2011 * 2x LED beacon lights on the cab * Reversing camera * Air conditioning Vacuum system CVS WR 3100, approx. 2,465 cbm/h at 400 bar * Drive: flexible, via drive shafts, V-belts, and pneumatically operated friction clutch from the vehicle engine’s PTO. * approx. 20m HD hose DN 125 * HOSE STORAGE CASSETTE WITH SIMULTANEOUS TELESCOPIC BOOM DN 125 * Maximum reach on pivot side: 5,200 mm High-pressure system Uraca P 3-45, approx. 345 l/min at 205 bar * Drive: flexible, via drive shafts, V-belts, and pneumatically operated friction clutch. * Large HD hose reel for 240m 1" DN 25, swivels 180° * Equipped with approx. 200m DN25 * Small HD hose reel for 80m DN 13, hydraulically operated * Equipped with approx. 60m DN13 Special features - hose storage cassette with telescopic boom DN 125 * Infinitely variable height adjustment of suction hose via hydraulic roller guide carriage * Suction hose boom, hydraulic operation and telescopic, swivels 180° * KROLL water recovery WRS2 * Water spray gun * LED beacon lights * LED work area lighting * Work functions remotely operated via CAN-BUS technology * Radio remote control * Reversing camera with 7" color monitor * Soundproof enclosure in pump area * Large tool and hose storage boxes * Toolbox * Holder for traffic cones * Vice * Pulley for banana/guide device * Large advertising boards on right and left For further detailed information and/or photos, please contact us directly. You can find a wide selection of further vehicles for PURCHASE or RENTAL at: Subject to changes, prior sale, and errors. The buyer is obliged to independently verify the condition and equipment of the goods. Sale exclusively pursuant to our general terms and conditions and under exclusion of any warranty. Special equipment: Front axle load 9.5 t, elevated exhaust pipe on right, co-driver bench seat, rear axle differential lock, ETA circuit breaker, flame-start device, heavy-duty roll stabilization, automatic climate control, trailing axle NOL-08 steered, liftable, PTO NMV221, beacon (2), external sun visor, fleet management system control module, reinforced front axle shock absorbers, preparation for engine start/stop system at end of frame.

Condition: new, functionality: fully functional, machine/vehicle number: TKG, cooling capacity: 3.5 kW (4.76 HP), overall weight: 40 kg, input voltage: 230 V, warranty duration: 12 months, type of cooling: air, Monoblock air conditioning units (with exhaust hose), original packaging, for sale. The following sizes are available: 2 kW (BTU 7000) for rooms up to 23 m² – €213.00 2.6 kW (BTU 9000) for rooms up to 25 m² – €272.50 3.5 kW (BTU 12000) for rooms up to 35 m² – €390.00 3.5 kW (BTU 12000) for rooms up to 35 m² with WIFI – €451.00 Lodpfxowwrk Ao Agtjhk Shipping within Germany per unit: €25.00 Manufacturer: KALORIK All prices incl. VAT.

Condition: reconditioned (used), Year of construction: 2017, operating hours: 461 h, functionality: fully functional, working width: 850 mm, area performance: 5,000 m²/h, overall weight: 606 kg, warranty duration: 12 months, water tank capacity: 120 l, gradeability: 11 %, NUMATIC TTV 678G/400T SCRUBBER NEW 12V 76Ah GEL BATTERIES (SONNENSCHEIN) (8x) 2017 year of manufacture and 461 hours of operation 850mm cleaning head equipped with three new medium-hardness disc brushes, allowing work on any surface. New squeegee and new polyurethane compression rubbers, resistant to contact with oil liquids, grease and petroleum derivatives. Built-in battery charger makes everyday use easier New protective rubbers around the brush head prevent water from splashing outside the machine's outline The device is equipped with a new, durable suction hose The new suction turbine ensures high water suction power from the squeegee Each device we offer has individually taken photos, you buy exactly the machine you see TECHNICAL DATA: Power supply voltage: 24 V Working width of brushes (mm): 850 Suction width (mm): 1100 Theoretical capacity (m²/h): 5000 Tank capacity clean/dirty water (l): 120/120 Number of brushes (pcs): 3 Brush speed (1/min): 220 Weight without batteries (kg): 315 Total weight, ready for work (kg): 620 Gradeability (%): 11 DIMENSIONS: Length with squeegee (mm) 1676 Height (mm) 1425 Lodowpr Huspfx Agtshk Width with squeegee (mm) 1100 Width without squeegee (mm) 1054 INCLUDED: NEW 12V 76Ah GEL BATTERIES (SONNENSCHEIN) (8x) NEW SQUEEGEE WITH NEW, OIL-RESISTANT RUBBERS NEW 24V 700W suction turbine NEW 300mm PPL 0.6 disc brushes (x3) NEW suction hose NEW head protective rubbers (x2) Built-in battery charger Tenzi Normal 5L fluid - FREE KEY FEATURES: A 120-litre tank allows you to pour a large amount of cleaning solution, so you don't have to stop working often to refill it Thanks to its design, the machine is very manoeuvrable. A small turning radius also allows you to work in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface The ergonomically designed cockpit and the centrally located operator's seat provide good visibility of the cleaned surface The large working width (850mm) ensures high surface efficiency A very legible and intuitive control panel.

Year of construction: 1989, condition: used, Technical details: Pressure max.: 30 MPa volume flow rate: 70 cbm/min. electrics - voltage/frequency: 380 / 3Ph ~ V/Hz tank capacity: 50 dm³ l machine weight approx.: 120 kg connected load: 0,62 kW dimensions L x W x H: 0,7 x Ø 600 x 1,3 m Lhedpou Nft Hjfx Agtok Application: Pressing grease into grease nipples Size of grease reservoir: 460 x 620mm Size of the press Ø 345 x 540mm Connection via bayonet mount Handling/operation with hand gun and 3.8 metre hose with ON/OFF switch The grease gun is mobile, equipped with handrail with two-hand grip and 220 V socket. *

Condition: excellent (used), mileage: 324,000 km, power: 100 kW (135.96 HP), first registration: 10/1991, fuel type: diesel, tire size: 225/75R17.5, axle configuration: 4x2, wheelbase: 3,150 mm, fuel: diesel, fuel tank capacity: 100 l, color: orange, driver cabin: day cab, gearing type: mechanical, number of gears: 5, emission class: euro1, suspension: steel, permissible axle load (axle 1): 3,800 kg, permissible axle load (axle 2): 6,100 kg, loading space volume: 4 m³, Year of construction: 1991, = Additional Options and Accessories = - 5-speed manual transmission - Leaf spring suspension - Comfort seats for the driver - Speed limiter - Main switch - Radio/CD player = Notes = GOOD CONDITION MERCEDES-BENZ 914KO RHD ECOLINER (6-CYLINDER) 4x2 FULL STEEL TANK TRUCK WITH MANUAL GEARBOX & STEEL SUSPENSION!! Lodpfxjv A H A Se Agtjhk 140 HP, 6-CYLINDER ENGINE!! 5-SPEED MANUAL GEARBOX!! STEEL SUSPENSION!! ETC.!! TANK BODY: LENGTH x WIDTH Approx. 3.10 x 1.72 m. !! (Approx. 3,500 liters) !! ANALOG METER!! LADDER!! GOOD WORKING TRUCK, READY FOR TANKER JOBS!! MORE MERCEDES-BENZ 4x2 / 6x4 / 6x6 / 8x4 / 8x8 (CONSTRUCTION) TRUCKS IN STOCK FOR SALE!! (>75 TRUCKS/TRAILERS IN STOCK)!! SHIPMENT, STACKING, TRANSPORT, TRANSIT REGISTRATION, OR LOADING? NO PROBLEM FOR US, WE ARE A "ONE-STOP SHOP" COMPANY!! PLEASE CHECK OUR STOCK ON OUR WEBSITE; YOU CAN ALSO CHECK OUR COMPANY VIDEO ON YOUTUBE FOR A FIRST IMPRESSION!! ( ) ENGEL TRUCKS; "YOUR GLOBAL TRADING PARTNER" = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 5,958 cc Transmission Transmission: 5-SPEED MANUAL GEARBOX, 5 gears, manual transmission Axle Configuration Brakes: Drum brakes Suspension: Leaf spring suspension Front axle: Tire size: 225/75R17.5; Max. axle load: 3800 kg; Steered; Tire tread depth left: 90%; Tire tread depth right: 90% Rear axle: Tire size: 235/75R17.5; Dual tires; Max. axle load: 6100 kg; Tire tread depth left inner: 90%; Tire tread depth left outer: 90%; Tire tread depth right inner: 90%; Tire tread depth right outer: 90%; Reduction: single reduction Weights Unladen weight: 5,200 kg Payload: 3,800 kg GVW: 9,000 kg Functional Number of compartments: 1 Pump: Yes Hoses: Yes Condition Technical condition: very good Optical condition: very good Further information Please contact the Sales Department or Erik Engel for further information.