Used Jaespa Band Saw - Automatic for sale (25,437)

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 306533, functionality: fully functional, cutting height (max.): 350 mm, cutting width (max.): 610 mm, overall weight: 550 kg, saw band length: 4,700 mm, TECHNICAL DETAILS Deflection pulley diameter: 630 mm Tool dimensions: 13 x 0.65 x 24 TPI Saw band length: 4,700 mm Loading height: 1,065 mm Cutting height: 350 mm Cutting width without rip fence: 610 mm Cutting width with fence: 150 mm Cutting speed: 10 - 100 m/min Table travel: 600 mm Table feed speed: 0.03 - 0.3 m/min MACHINE DETAILS Extraction connection diameter: 1 x 120 mm + 1 x 100 mm Required air velocity: minimum 25 m/s Required air volume flow: 1,725 m³/h Dimensions & Weight Dimensions (L x W x H): 1,850 x 1,200 x 2,300 mm Machine weight: 550 kg Kledpfx Afjyzy Drsdor Motor power: 0.75 kW Operating voltage: 400 Volt / 50 Hz Power supply: 3 x 400 Volt Fuse protection: maximum 16 Amperes Minimum cross-section: 1.5 mm²

Condition: new, Year of construction: 2024, Radial Band Saw Kedjmbbivjpfx Afdolr

Condition: excellent (used), Year of construction: 2006, Max. cutting capacity 90°: 260 mm Blade length: 4530 mm Blade width: 1.1 mm Kjdpfsy Edhvox Afdelr Motor power: 5 kW ----- Dimensions (L x W x H): 1800.0 × 2475.0 × 1600.0 mm Weight: 1700 kg Smallest diameter: 10 mm Shortest single stroke length: 15 mm Shortest length in automatic mode: 100 mm Working height: 700 mm Max. stroke: 9999 mm Control panel Memory: 99 programs with

Condition: new, roll diameter / mm throat / mm workpiece height / mm Vertical band saw – Model P70.110 Capacity 90° (mm) Height: 700 mm Width: 1100 mm Length: 6000 mm Motors Main motor (saw blade drive): 5.5 kW Hydraulic motor: 1.5 kW Coolant pump: 0.25 kW Feed servo motor: 1.5 kW Chip conveyor: 1.1 kW Further technical data Saw blade size: 7770 × 54 × 1.6 mm Material feed height: 1440 mm Hydraulic oil tank capacity: 40 l Coolant tank capacity: 190 l Machine dimensions (H × W × L): 4500 × 4000 × 8700 mm Weight: 20,000 kg Standard equipment - Hydraulically driven chip brush - Speed control device (belt speed adjustable via frequency converter) - Servo feed system (1–500 mm/min) - Hydraulic saw blade tensioning - Saw blade break detection and stop system - Touchscreen user interface - Laser line display (laser marking) - Scraper-type chip conveyor Kledpfx Afoy Eh A Djdsr - Hydraulically movable arm (automatic) - Chip trolley / chip container - Material alignment piston (for aligning the material) The images are for guidance only and are not a true-to-scale representation of the machine.

Condition: used, Year of construction: 1985, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, type of input current: three-phase, total height: 1,250 mm, total length: 1,800 mm, total width: 650 mm, overall weight: 1,000 kg, cutting range flat at 90° (X-axis): 400 mm, cutting range flat at 90° (Y-axis): 400 mm, cutting range round steel at 90°: 400 mm, saw blade length: 650 mm, Cutting capacity round: 400 mm Cutting capacity square: 400 x 400 mm Cutting capacity rectangular: 380 x 300 mm 3 stroke rates: 40/62/90 strokes/min Saw blade dimension: 650x50x2.5 mm Kodjymdizjpfx Afdjlr

Condition: used, Year of construction: 2014, machine/vehicle number: 0102-260010, The Behringer HBP413A bandsaw automatic is an economical metal bandsaw for automated 90° cutting operations in industrial production. The HBP413A bandsaw automatic offers a cutting range for round material from 10 mm to 410 mm and for flat material from 10 x 8 mm up to 500 x 400 mm, with a saw blade dimension of 5,800 x 41 x 1.3 mm. The frequency-controlled saw band drive has a motor power of 5.5 kW and offers steplessly adjustable cutting speeds from 20 – 140 m/min (66 – 459 ft/min). The cutting speed can be set and monitored on the control panel. The total drive power is approx. 7.5 kW. Special equipment: chip conveyor, micro-dosing unit, and vertical bundle clamping device at the feed gripper and in the sawing area. Klodsy D Immepfx Afder

Condition: not inspected (used), machine/vehicle number: B301556, functionality: unexamined, total height: 1,600 mm, overall weight: 300 kg, table length: 500 mm, table width: 400 mm, No reserve price – guaranteed sale to the highest bidder! By submitting a bid, the buyer commits to timely collection between 23/06/2026 and 26/06/2026! TECHNICAL DETAILS Saw blade feed, max.: 70 mm/min Table dimensions: 500 x 400 mm Klodpfx Afsy D Tbiedor MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 830 x 500 x 1,600 mm Machine weight: 300 kg EQUIPMENT Grinding wheel Band welding device External reference: 20

Condition: excellent (used), Year of construction: 2025, Horizontal thin-cut band saw Klsdpfx Afsy Dpn Eeder 400 mm working width New 2024 model with bigger wheels and inverters on wheels. Touchscreen Schneider, PLC and Inverters Schneider Germany 22.0 KW saw motor Bigger wheels for higher cutting speed Frequency controllers on the wheels for adjustable cutting speed. For slats from 2 mm

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, saw blade diameter: 700 mm, saw drive: 15,000 W, power of the servo motor: 11,000 W, Machine completely overhauled / as new with new electrics new Siemens S7 control system Completion upon order Crosscutting machine with chalk mark detection Wood cross-sections 430x30 / 300x150 / 200x200 DIMTER OptiCut 602 R Saw blade diameter 650/700 mm Kjdpfsv Diy Aox Afdolr Feed speed 120 m/min Saw motor 15 kW SEW servo drive 11.00 kW with inverter electric thickness adjustment

Condition: good (used), Year of construction: 2011, machine/vehicle number: 1423530534, Offer 26120 Technical specifications: - Saw blade diameter approx. 500 mm - Saw blade speed: 2800 rpm Klodpsy Efl Nsfx Afdor - Cutting area e.g. up to approx. 180 x 150 mm 150 x 200 mm - Feed length for 90° cuts: 5 - 600 mm - Mitre cuts possible up to 45° - Compressed air connection: 7 bar - Air consumption per work cycle without / with spraying: 50 / 64 l - Drive: 400 V / 4.0 kW - Space requirement approx.: W 2750 x H 1600 x D 1350 mm - Weight approx. 800 kg - Incl.: - Digital display - Pneumatic vice - Automatic shut-off at profile end

Condition: like new (used), Year of construction: 2018, operating hours: 2,150 h, functionality: fully functional, MEP TIGER 372 CNC LR 4.0 metal circular saw + CB4001 magazine High-performance automatic CNC metal circular saw with microprocessor control for cuts from 45°right to 60°left. Manufacturer: MEP Type: TIGER 372 CNC LR 4.0 Year of manufacture: 2018 Condition: very good, little used Switch-on hours: 2128h Cutting time: 1738h Machine with microprocessor control and two CNC-controlled axes, which allow up to 300 cutting programs, each with its own number of pieces and length, with the same material or material on the CB4001 loading magazine. Cutting range ROUND 0° 120 mm Cutting range ROUND 45° left 115 mm Cutting range ROUND 60° left 115 mm Cutting range ROUND 45° right 115 mm Cutting range SQUARE 0° 110 mm Cutting range FOUR-EDGE 45° left 100 mm Cutting range FOUR-EDGE 60° left 90 mm Cutting area FOUR-SQUARE 45° right 100 mm Cutting area FLAT 0° 180 x 100 mm Cutting area FLAT 45° left 120 x 100 mm Cutting area FLAT 60° left 90 x 90 mm Cutting range FLAT 45° right 120 x 100 mm Infinitely variable speed 15 to 150 rpm Motor 5.5 kW Saw blade 370 x 32 mm Coolant system Length 2500 mm width 1840 mm height 1890 mm Weight:1060 kg Scope of delivery: - Original documentation - 4x saw blades Kledpfx Ajy Ef Azjfdsr

Year of construction: 1995, condition: ready for operation (used), Saw band length: 3010mm, cutting diameter: 270mm, table height: 950mm, connected load: 2.2kW, control panel: PRATICO II CEB, weight: 1.3t. An on-site inspection is possible. Kljdpfxey D Trbj Afdjr

Condition: new, Year of construction: 2026, Wheel diameter 600 mm Cutting height 480 mm Kledpfxsy Ehy Ne Afdjr Dimensions (L/W/H) 5200x1600x1850 mm

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, Very well-maintained sharpening machine for bandsaws with wet grinding. Blade width from 70 to 400 mm. Ksdjy Eglwopfx Afdolr Blade length from 5.6 to 14 m Tooth pitch from 6 to 75 mm Feed rate freely programmable from 4 to 39 teeth per minute. Suitable for left and right-hand bandsaw blades without adjustment, including double-tooth blades. Feed and grinding head stroke are individually cam-controlled, allowing reduced feed speed at the tooth base. No complex electronics. Tooth counter. Grinding mist extraction. Deflection rollers.

Condition: good (used), Year of construction: 1997, Used bandsaw by MEP Model: Shark 260 Capacity: 260 x 210 mm Includes 2 feeders Kljdpfxey A Eccj Afder

Condition: new, Year of construction: 2026, Automatic and manual operation – continuous operation or trigger control possible Hydraulic arm drop adjustment – ​​smooth feed control without the risk of overload Cutting angle range: -45° to +60° – quick adjustment without disassembling the material Powerful 1500/1100 W motor (2/4-pole) – high performance even with thick profiles 2 belt speeds: 34 and 68 m/min – adapted to the material type Stable construction – 285 kg – zero vibration, high precision Quick clamp vice – quick material changeover in mass production Pump-based cooling system – extended belt life, improved cutting quality Automatic shut-off after cutting 400 V | 3-phase power supply | 50 Hz Motor power 1500 / 1100 W Belt speed 34 / 68 m/min Belt dimensions 2740 × 27 × 0.9 mm Belt pulley diameter 305 mm Cutting angle range 45°L | 30°L | 15°L | 0° | 15°R | 30°R | 45°R | 60°R Coolant pump 45 W Coolant tank capacity 16 l Net weight 285 kg Kjdpfx Aoyi Uq Uofdslr Noise level 68–71 dB

Condition: new, Year of construction: 2026, S275 Metal Cutting Machine Motor Type - 3-phase induction motor Kodpjxdbzbjfx Afdjlr Electrical connection - 400V 50/60Hz Power supply: 400V (three-phase) Protection - IP54 Power - 1.5 HP 1.1 kW Rated current - 400V - 3.6 Amp Speed ​​(RPM) - 50Hz - 2840/1420 Gearbox Transmission ratio - 50Hz - 1:30 Band saw Saw blade dimensions - 2480x27x0.9x6-10mm Blade guide wheel diameter - 293mm Saw blade speed - 50Hz - 45/90mm (m/min) Cooling System Pump Type – 230V 100W Pump Rated Current – ​​0.3 (Amp) Speed ​​– 50Hz-2840 (rpm) Tank Capacity – 10 liters Mechanical Data Dimensions with base – 1560x990x1665 (mm) Dimensions without base – 1320x510x755 (mm) Shipping Dimensions – 1380x570x890 (mm) Weight – Net – 185 (kg) | Gross – 200 (kg) Noise Level – 70 (dB) Fuse – max. 16 (Amps) Ambient Temperature – 5-35 (°C) Ambient Humidity – 25-80% General: Cutting Angle Adjustment: Via Swivel Arm Saw Blade Guides: Ball Bearing Guide Rollers Saw Arm Lift: Manual Feed: Continuously Adjustable Saw Blade Tension: Manually via Handwheel Band Guides with Bearings and Carbide Tiles Height from Floor to Vice: 910 mm

Condition: used, Year of construction: 2006, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 360 mm, cutting width (max.): 580 mm, Equipment: CE marking, documentation/manual, – CE certificate – Operating manual – Italian production – Year of manufacture: 2006 TECHNICAL PARAMETERS: – Diameter of guide wheels: Ø 600 mm – Cutting height: max. 360 mm – Cutting width: max. 580 mm – Table dimensions (L/W): 800 x 585 mm – Saw table tilt: 0° - 20° – Minimum blade/bandsaw length: 4480 mm – Minimum blade/bandsaw width: 10 mm – Maximum blade/bandsaw length: 4580 mm – Maximum blade/bandsaw width: 35 mm Kodpfx Afjy El U Djdolr – Flywheel speed: 715 rpm – Motor power: 2.2 kW / 400 V / 50 Hz – Extraction port diameter: 100 mm – Machine dimensions (L/W/H): 1120 / 800 / 2200 mm – Weight: ~300 kg

Condition: good (used), Year of construction: 1962, large band saw with 1250 mm roller diameter with center cutting device Kljdpsfnh T Iofx Afdsr 45 kw motor roller width 120 mm with electr. saw blade tensioning the upper wheel has been removed for transport very good condition because little run was overhauled in 1997

Condition: used, total height: 1,850 mm, total length: 950 mm, total width: 700 mm, Weight: 200 kg - Documentation available: No - CE certificate present: No - Serial number: 28359 - Saw direction: vertical - Max. total opening [mm]: 600 - Max. cutting height [mm]: 280 - Table length [mm]: 490 - Table width [mm]: 480 - Max. saw band width [mm]: 15 - Suction nozzle diameter [mm]: 100 - Voltage [V]: 400 - Fuse [A]: 16 - Transport dimensions: 950mm x 700mm x 1850mm (l x w x h) - Transport weight [kg]: 200kg - Transport packages [pcs.]: 1 Kjdsy A Ilgepfx Afdolr Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 2011, functionality: limited functionality, power: 1.93 kW (2.62 HP), input voltage: 400 V, cutting height (max.): 250 mm, overall weight: 370 kg, Equipment: CE marking, Brand: MEP Model: Shark 281 Year of manufacture: 2011 Serial number: 041593 Power (kW): 1.93 Voltage: 400 V Frequency (Hz): 50 Dimensions LxWxH (mm): 1600 x 800 x 2050 (excluding conveyors) Weight (kg) approx.: 370 (excluding conveyors) Stock quantity: 1 Manufactured in: Italy Cutting capacity (mm): 250 round / 230 square / 280 x 200 rectangular Comments: Fair used machine, ready to use. Kljdpoy A Ir Tsfx Afder

Condition: used, Year of construction: 2020, functionality: fully functional, power: 11 kW (14.96 HP), type of input current: three-phase, cutting width (max.): 320 mm, actuation type: electric, Equipment: CE marking, documentation/manual, motor brake, We offer this used Stenner ST bandsaw / resaw, year of construction 2000. Resaw bandsaw machine Klsdpjytyr Esfx Afdor Ideal for cutting beams and boards in woodworking. The anti-adhesive pump is defective. (Original pump and an alternative are present; the alternative needs to be installed by the buyer) Brand: Stenner Type: ST 105 Year of manufacture: 2020 Power: 11 kW Cutting width: 320 mm Extra feed rollers (also suitable for cutting mastics residue) Additional bandsaw blades Documentation available Has had annual maintenance. Can be seen in operation on location for serious interest. Price is excl. VAT. Dismantling and transport by arrangement. If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: new, Year of construction: 2025, – 2 speeds – Double mitre cut – Hydraulically adjustable sawing pressure – Quick-clamping device – Cooling Kjdpfx Aoyhh Tasfdelr – Automatic shut-off – Emergency stop – Documentation – 400V

Condition: good (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 6163012005, total length: 1,540 mm, total height: 1,560 mm, total width: 1,540 mm, saw blade length: 6,190 mm, overall weight: 1,950 kg, This solid hydraulic bandsaw is built with a very robust construction and designed for reliable daily operation. Thanks to the infinitely adjustable, fully hydraulic saw feed, the machine is exceptionally well-suited for both straight and mitre cuts of profiles, tubes, and solid materials of various qualities. The smooth rotation of the saw unit enables fast and precise setting of any desired mitre angle from -45° to +60° (acute angle 30°). Combined with the infinitely variable band speed and saw feed and the KASTO Universal Hydraulic system, this ensures optimal cutting performance and maximum saw blade service life. The standard KASTO AdvancedControl system provides convenient and intuitive operation. The clear operating menu allows sawing jobs to be easily entered and managed, making daily use efficient and user-friendly. Kodpfxey Aulme Afdjlr Technical Data Sawing capacity 90° round steel [mm]: 335 Sawing capacity 90° rectangular (W x H) [mm]: 520 x 335 Sawing capacity 90° solid square [mm]: 335 x 335 Sawing capacity +/-45° round [mm]: 335 Sawing capacity +/-45° rectangular (W x H) [mm]: 390 x 335 Sawing capacity +/-45° solid square [mm]: 335 x 335 Sawing capacity +60° round [mm]: 280 Sawing capacity +60° rectangular (W x H) [mm]: 260 x 335 Sawing capacity +60° solid square [mm]: 260 x 260 Smallest remnant length [mm]: 30 Shortest cutting length [mm]: 10 Smallest cut dimension [mm]: 10 Saw drive motor power / frequency controlled [kW]: 4.0 Total power [kW]: 5.0 Saw speed, infinitely adjustable [m/min]: 12 ÷ 150 Length [mm]: 1,540 Width [mm]: 3,010 Height (saw frame bottom) [mm]: 1,560 Height (saw frame top) [mm]: 2,360 Table height [mm]: 700 Weight [kg]: 2,000 Saw blade dimensions, standard [mm]: 6,190 x 34 x 1.1

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 60 degrees: round 180 mm capacity 60 degrees: flat 170 x 170 mm height of material-table 600 mm Pitch min/max 50.000 mm vice 335 mm Öffnung band speed 15 - 100 m/min automatic feeds 600 mm dimensions of saw-band 3650 x 27 x 0,9 mm Control MEP CNC total power requirement 2.2 kW weight 1.105 kg range L-W-H 3,3 x 2,83 x 2,23 m electro-hydraulic band saw fully automatic, with additional : * semi-automatic * semi-automatic-dynamic * manual .. operation Description: - robust electro-hydraulic band saw fully automatic (INDUSTRY) * MEP - WINDOWS numerical control unit * User interface with 7” touch screen display * mechanical buttons for the sawing machine’s operating functions * guarantees reliable operation, simple and intuitive * real-time control of all cutting parameters * pivoting arm enables comfortable and safe operation * display and recording of alarm and error messages - miter cuts with automatic cycle from 0° to 60° left - semi-automatic, semi-automatic-dynamic and manual cycle * miter cuts from 45° right to 60° left - manual or semi-automatic dynamic cycle selectable * to make cuts without programming - protective housing for the safety of the worker - continuous regulation of the cutting speed from 15 to 100 m/min * via frequency converter (inverter) Klsdpfxsxabavs Afdor - Latest generation hydraulic unit * extremely powerful with low energy consumption. - Material feed with stepper motor via ball screw * mounted on opposing ball bearings * Single stroke 600 mm repeatable to saw any length. - Positioning of the saw head and movement of the feeder using a joystick. - Automatic detection of the start of the cut position - Manually operated band tension control with indication on the display * using an electronic converter - Automatic monitoring of the cutting load * using a servo valve mounted directly on the cylinder - The coolant tray is built into the base frame - Chip removal brush - Bimetal saw band for solid and profile material - Tools and instructions for use with spare parts list * Angularity = 2/12 degrees * Length accuracy = plus/minus 0.1 mm per feed